| Age | Commit message (Collapse) | Author |
|---|
|
Add helpers to get atomic write limits for a bdev, so that we don't access
request_queue helpers outside the block layer.
We check if the bdev can actually atomic write in these helpers, so we
can avoid users missing using this check.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241019125113.369994-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently FMODE_CAN_ATOMIC_WRITE is set if the bdev can atomic write and
the file is open for direct IO. This does not work if the file is not
opened for direct IO, yet fcntl(O_DIRECT) is used on the fd later.
Change to check for direct IO on a per-IO basis in
generic_atomic_write_valid(). Since we want to report -EOPNOTSUPP for
non-direct IO for an atomic write, change to return an error code.
Relocate the block fops atomic write checks to the common write path, as to
catch non-direct IO.
Fixes: c34fc6f26ab8 ("fs: Initial atomic write support")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241019125113.369994-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Darrick and Hannes both thought it better that generic_atomic_write_valid()
should be passed a struct iocb, and not just the member of that struct
which is referenced; see [0] and [1].
I think that makes a more generic and clean API, so make that change.
[0] https://lore.kernel.org/linux-block/680ce641-729b-4150-b875-531a98657682@suse.de/
[1] https://lore.kernel.org/linux-xfs/20240620212401.GA3058325@frogsfrogsfrogs/
Fixes: c34fc6f26ab8 ("fs: Initial atomic write support")
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Suggested-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241019125113.369994-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop it has
O(N^2) behaviour under contention with N concurrent operations and it is
in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make this
work and requiring rcu protection for the data structure in question.
This not just scales better it also introduces overflow protection.
However, in contrast to generic rcuref, files require a memory barrier
and thus cannot rely on *_relaxed() atomic operations and also require
to be built on atomic_long_t as having massive amounts of reference
isn't unheard of even if it is just an attack.
As suggested by Linus, add a file specific variant instead of making
this a generic library.
Files are SLAB_TYPESAFE_BY_RCU and thus don't have "regular" rcu
protection. In short, freeing of files isn't delayed until a grace
period has elapsed. Instead, they are freed immediately and thus can be
reused (multiple times) within the same grace period.
So when picking a file from the file descriptor table via its file
descriptor number it is thus possible to see an elevated reference count
on file->f_count even though the file has already been recycled possibly
multiple times by another task.
To guard against this the vfs will pick the file from the file
descriptor table twice. Once before the refcount increment and once
after to compare the pointers (grossly simplified). If they match then
the file is still valid. If not the caller needs to fput() it.
The unconditional increment makes the following race possible as
illustrated by rcuref:
> Deconstruction race
> ===================
>
> The release operation must be protected by prohibiting a grace period in
> order to prevent a possible use after free:
>
> T1 T2
> put() get()
> // ref->refcnt = ONEREF
> if (!atomic_add_negative(-1, &ref->refcnt))
> return false; <- Not taken
>
> // ref->refcnt == NOREF
> --> preemption
> // Elevates ref->refcnt to ONEREF
> if (!atomic_add_negative(1, &ref->refcnt))
> return true; <- taken
>
> if (put(&p->ref)) { <-- Succeeds
> remove_pointer(p);
> kfree_rcu(p, rcu);
> }
>
> RCU grace period ends, object is freed
>
> atomic_cmpxchg(&ref->refcnt, NOREF, DEAD); <- UAF
>
> [...] it prevents the grace period which keeps the object alive until
> all put() operations complete.
Having files by SLAB_TYPESAFE_BY_RCU shouldn't cause any problems for
this deconstruction race. Afaict, the only interesting case would be
someone freeing the file and someone immediately recycling it within the
same grace period and reinitializing file->f_count to ONEREF while a
concurrent fput() is doing atomic_cmpxchg(&ref->refcnt, NOREF, DEAD) as
in the race above.
But this is safe from SLAB_TYPESAFE_BY_RCU's perspective and it should
be safe from rcuref's perspective.
T1 T2 T3
fput() fget()
// f_count->refcnt = ONEREF
if (!atomic_add_negative(-1, &f_count->refcnt))
return false; <- Not taken
// f_count->refcnt == NOREF
--> preemption
// Elevates f_count->refcnt to ONEREF
if (!atomic_add_negative(1, &f_count->refcnt))
return true; <- taken
if (put(&f_count)) { <-- Succeeds
remove_pointer(p);
/*
* Cache is SLAB_TYPESAFE_BY_RCU
* so this is freed without a grace period.
*/
kmem_cache_free(p);
}
kmem_cache_alloc()
init_file() {
// Sets f_count->refcnt to ONEREF
rcuref_long_init(&f->f_count, 1);
}
Object has been reused within the same grace period
via kmem_cache_alloc()'s SLAB_TYPESAFE_BY_RCU.
/*
* With SLAB_TYPESAFE_BY_RCU this would be a safe UAF access and
* it would work correctly because the atomic_cmpxchg()
* will fail because the refcount has been reset to ONEREF by T3.
*/
atomic_cmpxchg(&ref->refcnt, NOREF, DEAD); <- UAF
However, there are other cases to consider:
(1) Benign race due to multiple atomic_long_read()
CPU1 CPU2
file_ref_put()
// last reference
// => count goes negative/FILE_REF_NOREF
atomic_long_add_negative_release(-1, &ref->refcnt)
-> __file_ref_put()
file_ref_get()
// goes back from negative/FILE_REF_NOREF to 0
// and file_ref_get() succeeds
atomic_long_add_negative(1, &ref->refcnt)
// This is immediately followed by file_ref_put()
// managing to set FILE_REF_DEAD
file_ref_put()
// __file_ref_put() continues and sees
// cnt > FILE_REF_RELEASED // and splats with
// "imbalanced put on file reference count"
cnt = atomic_long_read(&ref->refcnt);
The race however is benign and the problem is the
atomic_long_read(). Instead of performing a separate read this uses
atomic_long_dec_return() and pass the value to __file_ref_put().
Thanks to Linus for pointing out that braino.
(2) SLAB_TYPESAFE_BY_RCU may cause recycled files to be marked dead
When a file is recycled the following race exists:
CPU1 CPU2
// @file is already dead and thus
// cnt >= FILE_REF_RELEASED.
file_ref_get(file)
atomic_long_add_negative(1, &ref->refcnt)
// We thus call into __file_ref_get()
-> __file_ref_get()
// which sees cnt >= FILE_REF_RELEASED
cnt = atomic_long_read(&ref->refcnt);
// In the meantime @file gets freed
kmem_cache_free()
// and is immediately recycled
file = kmem_cache_zalloc()
// and the reference count is reinitialized
// and the file alive again in someone
// else's file descriptor table
file_ref_init(&ref->refcnt, 1);
// the __file_ref_get() slowpath now continues
// and as it saw earlier that cnt >= FILE_REF_RELEASED
// it wants to ensure that we're staying in the middle
// of the deadzone and unconditionally sets
// FILE_REF_DEAD.
// This marks @file dead for CPU2...
atomic_long_set(&ref->refcnt, FILE_REF_DEAD);
// Caller issues a close() system call to close @file
close(fd)
file = file_close_fd_locked()
filp_flush()
// The caller sees that cnt >= FILE_REF_RELEASED
// and warns the first time...
CHECK_DATA_CORRUPTION(file_count(file) == 0)
// and then splats a second time because
// __file_ref_put() sees cnt >= FILE_REF_RELEASED
file_ref_put(&ref->refcnt);
-> __file_ref_put()
My initial inclination was to replace the unconditional
atomic_long_set() with an atomic_long_try_cmpxchg() but Linus
pointed out that:
> I think we should just make file_ref_get() do a simple
>
> return !atomic_long_add_negative(1, &ref->refcnt));
>
> and nothing else. Yes, multiple CPU's can race, and you can increment
> more than once, but the gap - even on 32-bit - between DEAD and
> becoming close to REF_RELEASED is so big that we simply don't care.
> That's the point of having a gap.
I've been testing this with will-it-scale using fstat() on a machine
that Jens gave me access (thank you very much!):
processor : 511
vendor_id : AuthenticAMD
cpu family : 25
model : 160
model name : AMD EPYC 9754 128-Core Processor
and I consistently get a 3-5% improvement on 256+ threads.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202410151043.5d224a27-oliver.sang@intel.com
Closes: https://lore.kernel.org/all/202410151611.f4cd71f2-oliver.sang@intel.com
Link: https://lore.kernel.org/r/20241007-brauner-file-rcuref-v2-2-387e24dc9163@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull xfs fixes from Carlos Maiolino:
- Fix integer overflow in xrep_bmap
- Fix stale dealloc punching for COW IO
* tag 'xfs-6.12-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: punch delalloc extents from the COW fork for COW writes
xfs: set IOMAP_F_SHARED for all COW fork allocations
xfs: share more code in xfs_buffered_write_iomap_begin
xfs: support the COW fork in xfs_bmap_punch_delalloc_range
xfs: IOMAP_ZERO and IOMAP_UNSHARE already hold invalidate_lock
xfs: take XFS_MMAPLOCK_EXCL xfs_file_write_zero_eof
xfs: factor out a xfs_file_write_zero_eof helper
iomap: move locking out of iomap_write_delalloc_release
iomap: remove iomap_file_buffered_write_punch_delalloc
iomap: factor out a iomap_last_written_block helper
xfs: fix integer overflow in xrep_bmap
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, msm and xe are the two main ones, with a bunch of
scattered fixes including a largish revert in mgag200, then amdgpu,
vmwgfx and scattering of other minor ones.
All seems pretty regular.
msm:
- Display:
- move CRTC resource assignment to atomic_check otherwise to make
consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
this leads to false timeouts
- GPU:
- a7xx: add a fence wait before SMMU table update
xe:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew
Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes
amdkfd:
- VRAM usage reporting fix
radeon:
- Fix possible_clones handling
i915:
- Two DP bandwidth related MST fixes
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()"
* tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel: (45 commits)
drm/ast: vga: Clear EDID if no display is connected
drm/ast: sil164: Clear EDID if no display is connected
Revert "drm/mgag200: Add vblank support"
drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs
drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
drm/xe/bmg: improve cache flushing behaviour
drm/xe/xe_sync: initialise ufence.signalled
drm/xe/ufence: ufence can be signaled right after wait_woken
drm/xe: Use bookkeep slots for external BO's in exec IOCTL
drm/xe/query: Increase timestamp width
drm/xe: Don't free job in TDR
drm/xe: Take job list lock in xe_sched_add_pending_job
drm/xe: fix unbalanced rpm put() with declare_wedged()
drm/xe: fix unbalanced rpm put() with fence_fini()
drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg
drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
drm/msm/a6xx+: Insert a fence wait before SMMU table update
drm/msm/dpu: don't always program merge_3d block
drm/msm/dpu: Don't always set merge_3d pending flush
...
|
|
lockdep_set_subclass()
Syzbot reports a problem that a warning will be triggered while
searching a lock class in look_up_lock_class().
The cause of the issue is that a new name is created and used by
lockdep_set_subclass() instead of using the existing one. This results
in a lock instance has a different name pointer than previous registered
one stored in lock class, and WARN_ONCE() is triggered because of that
in look_up_lock_class().
To fix this, change lockdep_set_subclass() to use the existing name
instead of a new one. Hence, no new name will be created by
lockdep_set_subclass(). Hence, the warning is avoided.
[boqun: Reword the commit log to state the correct issue]
Reported-by: <syzbot+7f4a6f7f7051474e40ad@syzkaller.appspotmail.com>
Fixes: de8f5e4f2dc1f ("lockdep: Introduce wait-type checks")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Ehab <bottaawesome633@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/lkml/20240824221031.7751-1-bottaawesome633@gmail.com/
|
|
Add a function to check that an offline CPU has left the tracing
infrastructure in a sane state.
Commit 9bb69ba4c177 ("ACPI: processor_idle: use raw_safe_halt() in
acpi_idle_play_dead()") fixed an issue where the acpi_idle_play_dead()
function called safe_halt() instead of raw_safe_halt(), which had the
side-effect of setting the hardirqs_enabled flag for the offline CPU.
On x86 this triggered warnings from lockdep_assert_irqs_disabled() when
the CPU was brought back online again later. These warnings were too
early for the exception to be handled correctly, leading to a
triple-fault.
Add lockdep_cleanup_dead_cpu() to check for this kind of failure mode,
print the events leading up to it, and correct it so that the CPU can
come online again correctly. Re-introducing the original bug now merely
results in this warning instead:
[ 61.556652] smpboot: CPU 1 is now offline
[ 61.556769] CPU 1 left hardirqs enabled!
[ 61.556915] irq event stamp: 128149
[ 61.556965] hardirqs last enabled at (128149): [<ffffffff81720a36>] acpi_idle_play_dead+0x46/0x70
[ 61.557055] hardirqs last disabled at (128148): [<ffffffff81124d50>] do_idle+0x90/0xe0
[ 61.557117] softirqs last enabled at (128078): [<ffffffff81cec74c>] __do_softirq+0x31c/0x423
[ 61.557199] softirqs last disabled at (128065): [<ffffffff810baae1>] __irq_exit_rcu+0x91/0x100
[boqun: Capitalize the title and reword the message a bit]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/f7bd2b3b999051bb3ef4be34526a9262008285f5.camel@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"28 hotfixes. 13 are cc:stable. 23 are MM.
It is the usual shower of unrelated singletons - please see the
individual changelogs for details"
* tag 'mm-hotfixes-stable-2024-10-17-16-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: add regression test for spanning store bug
maple_tree: correct tree corruption on spanning store
mm/mglru: only clear kswapd_failures if reclaimable
mm/swapfile: skip HugeTLB pages for unuse_vma
selftests: mm: fix the incorrect usage() info of khugepaged
MAINTAINERS: add Jann as memory mapping/VMA reviewer
mm: swap: prevent possible data-race in __try_to_reclaim_swap
mm: khugepaged: fix the incorrect statistics when collapsing large file folios
MAINTAINERS: kasan, kcov: add bugzilla links
mm: don't install PMD mappings when THPs are disabled by the hw/process/vma
mm: huge_memory: add vma_thp_disabled() and thp_disabled_by_hw()
Docs/damon/maintainer-profile: update deprecated awslabs GitHub URLs
Docs/damon/maintainer-profile: add missing '_' suffixes for external web links
maple_tree: check for MA_STATE_BULK on setting wr_rebalance
mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point
mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
mm: remove unused stub for can_swapin_thp()
mailmap: add an entry for Andy Chiu
MAINTAINERS: add memory mapping/VMA co-maintainers
fs/proc: fix build with GCC 15 due to -Werror=unterminated-string-initialization
...
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017115516.GA196624@linux.fritz.box
|
|
Add CLK_DIVIDER_EVEN_INTEGERS flag to support divisor of 2, 4, 6, etc.
The same divisor can be done using a table, which would be big and
wasteful for a clock dividor of width 8 (256 entries).
Require increasing flags size from u8 to u16 because
CLK_DIVIDER_EVEN_INTEGERS is the eighth flag. u16 is used inside struct
clk_divider; `unsigned long` is used for function arguments.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241007-mbly-clk-v5-3-e9d8994269cb@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add new module for SDCA (SoundWire Device Class for Audio) support.
For now just add a parser to identify the SDCA revision and the
function mask.
Note that the SDCA definitions and related MIPI DisCo properties are
defined only for ACPI platforms and extracted with _DSD helpers. There
is currently no support for Device Tree in the specification, the
'depends on ACPI' reflects this design limitation. This might change
in a future revision of the specification but for SDCA 1.0 ACPI is the
only supported type of platform firmware.
The SDCA library is defined with static inline fallbacks, which will
allow for unconditional addition of SDCA support in common parts of
the code.
The design follows a four-step process:
1) Basic information related to Functions is extracted from MIPI DisCo
tables and stored in the 'struct sdw_slave'. Devm_ based memory
allocation is not allowed at this point prior to a driver probe, so we only
store the function node, address and type.
2) When a codec driver probes, it will register subdevices for each
Function identified in phase 1)
3) a driver will probe for each subdevice and addition parsing/memory
allocation takes place at this level. devm_ based allocation is highly
encouraged to make error handling manageable.
4) Before the peripheral device becomes physically attached, register
access is not permitted and the regmaps are cache-only. When
peripheral device is enumerated, the bus level uses the
'update_status' notification; after optional device-level
initialization, the codec driver will notify each of the subdevices so
that they can start interacting with the hardware.
Note that the context extracted in 1) should be arguably be handled
completely in the codec driver probe. That would however make it
difficult to use the ACPI information for machine quirks, and
e.g. select different machine driver and topologies as done for the
RT712_VB handling later in the series. To make the implementation of
quirks simpler, this patchset extracts a minimal amount of context
(interface revision and number/type of Functions) before the codec
driver probe, and stores this context in the scope of the 'struct
sdw_slave'.
The SDCA library can also be used in a vendor-specific driver without
creating subdevices, e.g. to retrieve the 'initialization-table'
values to write platform-specific values as needed.
For more technical details, the SDCA specification is available for
public downloads at https://www.mipi.org/mipi-sdca-v1-0-download
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This structure is used to copy information from the 'sdw_slave'
structures, it's better to create a flexible array of 'sdw_slave'
pointers and directly access the information. This will also help
access additional information stored in the 'sdw_slave' structure,
such as an SDCA context.
This patch does not add new functionality, it only modified how the
information is retrieved.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For the acpi_handle stuff.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20241016102333.294448-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, nothing really stands out:
- Usual HD-audio quirks / device-specific fixes
- Kconfig dependency fix for UM
- A series of minor fixes for SoundWire
- Updates of USB-audio LINE6 contact address"
* tag 'sound-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2
ALSA/hda: intel-sdw-acpi: add support for sdw-manager-list property read
ALSA/hda: intel-sdw-acpi: simplify sdw-master-count property read
ALSA/hda: intel-sdw-acpi: fetch fwnode once in sdw_intel_scan_controller()
ALSA/hda: intel-sdw-acpi: cleanup sdw_intel_scan_controller
ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects
ALSA: scarlett2: Add error check after retrieving PEQ filter values
ALSA: hda/cs8409: Fix possible NULL dereference
sound: Make CONFIG_SND depend on INDIRECT_IOMEM instead of UML
ALSA: line6: update contact information
ALSA: usb-audio: Fix NULL pointer deref in snd_usb_power_domain_set()
ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
ALSA: hda: Sound support for HP Spectre x360 16 inch model 2024
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
|
|
Conflicts:
kernel/sched/ext.c
There's a context conflict between this upstream commit:
3fdb9ebcec10 sched_ext: Start schedulers with consistent p->scx.slice values
... and this fix in sched/urgent:
98442f0ccd82 sched: Fix delayed_dequeue vs switched_from_fair()
Resolve it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Patch series "mm: don't install PMD mappings when THPs are disabled by the
hw/process/vma".
During testing, it was found that we can get PMD mappings in processes
where THP (and more precisely, PMD mappings) are supposed to be disabled.
While it works as expected for anon+shmem, the pagecache is the
problematic bit.
For s390 KVM this currently means that a VM backed by a file located on
filesystem with large folio support can crash when KVM tries accessing the
problematic page, because the readahead logic might decide to use a
PMD-sized THP and faulting it into the page tables will install a PMD
mapping, something that s390 KVM cannot tolerate.
This might also be a problem with HW that does not support PMD mappings,
but I did not try reproducing it.
Fix it by respecting the ways to disable THPs when deciding whether we can
install a PMD mapping. khugepaged should already be taking care of not
collapsing if THPs are effectively disabled for the hw/process/vma.
This patch (of 2):
Add vma_thp_disabled() and thp_disabled_by_hw() helpers to be shared by
shmem_allowable_huge_orders() and __thp_vma_allowable_orders().
[david@redhat.com: rename to vma_thp_disabled(), split out thp_disabled_by_hw() ]
Link: https://lkml.kernel.org/r/20241011102445.934409-2-david@redhat.com
Fixes: 793917d997df ("mm/readahead: Add large folio readahead")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Leo Fu <bfu@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Boqiao Fu <bfu@redhat.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Arnd reported a build failure due to the BUILD_BUG_ON() statement in
alloc_kmem_cache_cpus(). The test
PERCPU_DYNAMIC_EARLY_SIZE < NR_KMALLOC_TYPES * KMALLOC_SHIFT_HIGH * sizeof(struct kmem_cache_cpu)
The factors that increase the right side of the equation:
- PAGE_SIZE > 4KiB increases KMALLOC_SHIFT_HIGH
- For the local_lock_t in kmem_cache_cpu:
- PREEMPT_RT adds an actual lock.
- LOCKDEP increases the size of the lock.
- LOCK_STAT adds additional bytes plus padding to the lockdep
structure.
The net difference with and without PREEMPT_RT is 88 bytes for the
lock_lock_t, 96 bytes for kmem_cache_cpu due to additional padding. This
is enough to exceed the 80KiB limit with 16KiB page size - the 8KiB page
size is fine.
Increase PERCPU_DYNAMIC_SIZE_SHIFT to 13 on configs with PAGE_SIZE larger
than 4KiB and LOCKDEP enabled.
Link: https://lkml.kernel.org/r/20241007143049.gyMpEu89@linutronix.de
Fixes: d8fccd9ca5f9 ("arm64: Allow to enable PREEMPT_RT.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410020326.iaZIteIx-lkp@intel.com/
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/20241004095702.637528-1-arnd@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unexport nr_irqs and declare it static now that all code that reads or
modifies nr_irqs has been converted to number_of_interrupts() /
set_number_of_interrupts(). Change the type of 'nr_irqs' from 'int' into
'unsigned int' to match the return type and argument type of the
irq_get_nr_iqs() / irq_set_nr_irqs() functions.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-23-bvanassche@acm.org
|
|
Use the irq_get_nr_irqs() function instead of the global variable
'nr_irqs'. Cache the result of this function in a local variable in
order not to rely on CSE (common subexpression elimination). Prepare
for changing 'nr_irqs' from an exported global variable into a variable
with file scope.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-22-bvanassche@acm.org
|
|
Prepare for changing 'nr_irqs' from an exported global variable into a
variable with file scope.
This will prevent accidental changes of assignments to a local variable
'nr_irqs' into assignments to the global 'nr_irqs' variable.
Suppose that a patch would be submitted for review that removes a
declaration of a local variable with the name 'nr_irqs' and that that patch
does not remove all assignments to that local variable. Such a patch
converts an assignment to a local variable into an assignment into a global
variable. If the 'nr_irqs' assignment is more than three lines away from
other changes, the assignment won't be included in the diff context lines
and hence won't be visible without inspecting the modified file.
With these abstraction series applied, such accidental conversions from
assignments to a local variable into an assignment to a global variable are
converted into a compilation error.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-2-bvanassche@acm.org
|
|
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When working in "fd mode", fanotify_read() needs to open an fd
from a dentry to report event->fd to userspace.
Opening an fd from dentry can fail for several reasons.
For example, when tasks are gone and we try to open their
/proc files or we try to open a WRONLY file like in sysfs
or when trying to open a file that was deleted on the
remote network server.
Add a new flag FAN_REPORT_FD_ERROR for fanotify_init().
For a group with FAN_REPORT_FD_ERROR, we will send the
event with the error instead of the open fd, otherwise
userspace may not get the error at all.
For an overflow event, we report -EBADF to avoid confusing FAN_NOFD
with -EPERM. Similarly for pidfd open errors we report either -ESRCH
or the open error instead of FAN_NOPIDFD and FAN_EPIDFD.
In any case, userspace will not know which file failed to
open, so add a debug print for further investigation.
Reported-by: Krishna Vivek Vitta <kvitta@microsoft.com>
Link: https://lore.kernel.org/linux-fsdevel/SI2P153MB07182F3424619EDDD1F393EED46D2@SI2P153MB0718.APCP153.PROD.OUTLOOK.COM/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241003142922.111539-1-amir73il@gmail.com
|
|
This is needed for extending fuse inode size after fuse passthrough write.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/linux-fsdevel/CAJfpegs=cvZ_NYy6Q_D42XhYS=Sjj5poM1b5TzXzOVvX=R36aA@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Define EC_FEATURE_UCSI_PPM to enable usage of the cros_ec_ucsi
driver. Also, add any feature flags that are implemented by the EC
but are missing in the kernel header.
Signed-off-by: Pavan Holla <pholla@chromium.org>
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240910101527.603452-3-ukaszb@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
S2DOS05 is a panel/touchscreen PMIC, often found in
Samsung phones. We define regulator sub-device for which driver will
be added in subsequent patch. The device also has ADC for power and
current measurements.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240617-starqltechn_integration_upstream-v5-2-ea1109029ba5@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove `enum max77693_irq_source` declaration because unused.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240617-starqltechn_integration_upstream-v5-1-125d9228d751@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The names of regulators are static const strings, so pointers can be made
as pointers to const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240909134941.121847-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Function descriptions in iopoll.h, regmap.h, phy.h and sound/soc/sof/ops.h
copied all the same outdated documentation about sleep/delay function
limitations. In those comments, the generic (and still outdated) timer
documentation file is referenced.
As proper function descriptions for used delay and sleep functions are in
place, simply update the descriptions to reference to them. While at it fix
missing colon after "Returns" in function description and move return value
description to the end of the function description.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch> # for phy.h
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-12-dc8b907cb62f@linutronix.de
|
|
fsleep() simply implements the recommendations of the outdated
documentation in "Documentation/timers/timers-howto.rst". This should be a
user friendly interface to choose always the best timeout function
approach:
- udelay() for very short sleep durations shorter than 10 microseconds
- usleep_range() for sleep durations until 20 milliseconds
- msleep() for the others
The actual implementation has several problems:
- It does not take into account that HZ resolution also has an impact on
granularity of jiffies and has also an impact on the granularity of the
buckets of timer wheel levels. This means that accuracy for the timeout
does not have an upper limit. When executing fsleep(20000) on a HZ=100
system, the possible additional slack will be 50% as the granularity of
the buckets in the lowest level is 10 milliseconds.
- The upper limit of usleep_range() is twice the requested timeout. When no
other interrupts occur in this range, the maximum value is used. This
means that the requested sleep length has then an additional delay of
100%.
Change the thresholds for the decisions in fsleep() to make sure the
maximum slack which is added to the sleep duration is 25%.
Note: Outdated documentation will be updated in a followup patch.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-7-dc8b907cb62f@linutronix.de
|
|
A lot of commonly used functions for inserting a sleep or delay lack a
proper function description. Add function descriptions to all of them to
have important information in a central place close to the code.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-5-dc8b907cb62f@linutronix.de
|
|
usleep_idle_range() is a variant of usleep_range(). Both are using
usleep_range_state() as a base. To be able to find all the related
functions in one go, rename it usleep_idle_range() to usleep_range_idle().
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-4-dc8b907cb62f@linutronix.de
|
|
Rename ftrace_regs_return_value to ftrace_regs_get_return_value as same as
other ftrace_regs_get/set_* APIs. arm64 and riscv are already using this
new name.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/172895573350.107311.7564634260652361511.stgit@devnote2
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since the arch_ftrace_get_regs(fregs) is only valid when the
FL_SAVE_REGS is set, we need to use `&arch_ftrace_regs()->regs` for
ftrace_regs_*() APIs because those APIs are for ftrace_regs, not
complete pt_regs.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/172895572290.107311.16057631001860177198.stgit@devnote2
Fixes: e4cf33ca4812 ("ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
__calc_tpm2_event_size returns 0 or a positive length, but return values
are often interpreted as ints. Convert everything over to u32 to avoid
signed/unsigned logic errors.
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- New metadata version inode_has_child_snapshots
This fixes bugs with handling of unlinked inodes + snapshots, in
particular when an inode is reattached after taking a snapshot;
deleted inodes now get correctly cleaned up across snapshots.
- Disk accounting rewrite fixes
- validation fixes for when a device has been removed
- fix journal replay failing with "journal_reclaim_would_deadlock"
- Some more small fixes for erasure coding + device removal
- Assorted small syzbot fixes
* tag 'bcachefs-2024-10-14' of git://evilpiepirate.org/bcachefs: (27 commits)
bcachefs: Fix sysfs warning in fstests generic/730,731
bcachefs: Handle race between stripe reuse, invalidate_stripe_to_dev
bcachefs: Fix kasan splat in new_stripe_alloc_buckets()
bcachefs: Add missing validation for bch_stripe.csum_granularity_bits
bcachefs: Fix missing bounds checks in bch2_alloc_read()
bcachefs: fix uaf in bch2_dio_write_done()
bcachefs: Improve check_snapshot_exists()
bcachefs: Fix bkey_nocow_lock()
bcachefs: Fix accounting replay flags
bcachefs: Fix invalid shift in member_to_text()
bcachefs: Fix bch2_have_enough_devs() for BCH_SB_MEMBER_INVALID
bcachefs: __wait_for_freeing_inode: Switch to wait_bit_queue_entry
bcachefs: Check if stuck in journal_res_get()
closures: Add closure_wait_event_timeout()
bcachefs: Fix state lock involved deadlock
bcachefs: Fix NULL pointer dereference in bch2_opt_to_text
bcachefs: Release transaction before wake up
bcachefs: add check for btree id against max in try read node
bcachefs: Disk accounting device validation fixes
bcachefs: bch2_inode_or_descendents_is_open()
...
|
|
In order to store device DMA parameters, the DMA framework depends on
the device's dma_parms field to point at a valid memory location. Add
backing storage for this in struct host1x_memory_context and point to
it.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916133320.368620-1-thierry.reding@gmail.com
(cherry picked from commit b4ad4ef374d66cc8df3188bb1ddb65bce5fc9e50)
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Most architectures use pt_regs within ftrace_regs making a lot of the
accessor functions just calls to the pt_regs internally. Instead of
duplication this effort, use a HAVE_ARCH_FTRACE_REGS for architectures
that have their own ftrace_regs that is not based on pt_regs and will
define all the accessor functions, and for the architectures that just use
pt_regs, it will leave it undefined, and the default accessor functions
will be used.
Note, this will also make it easier to add new accessor functions to
ftrace_regs as it will mean having to touch less architectures.
Cc: <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241010202114.2289f6fd@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # powerpc
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Move the debug_obj::object pointer into a union and add a pointer to the
last node in a batch. That allows to implement batch processing efficiently
by utilizing the stack property of hlist:
When the first object of a batch is added to the list, then the batch
pointer is set to the hlist node of the object itself. Any subsequent add
retrieves the pointer to the last node from the first object in the list
and uses that for storing the last node pointer in the newly added object.
Add the pointer to the data structure and ensure that all relevant pool
sizes are strictly batch sized. The actual batching implementation follows
in subsequent changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/all/20241007164914.139204961@linutronix.de
|
|
The of_busses array is fixed, so it and all struct of_bus pointers can
be const.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-7-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Most accesses to struct property do not modify it, so constify struct
property pointers where ever possible in the DT core code.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-4-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Functions which don't change the refcount or otherwise modify struct
device_node can make struct device_node const.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-3-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
pci_register_io_range() does not modify the passed in fwnode_handle, so
make it const.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241010-dt-const-v1-1-87a51f558425@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Currently iomap_file_buffered_write_punch_delalloc can be called from
XFS either with the invalidate lock held or not. To fix this while
keeping the locking in the file system and not the iomap library
code we'll need to life the locking up into the file system.
To prepare for that, open code iomap_file_buffered_write_punch_delalloc
in the only caller, and instead export iomap_write_delalloc_release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Split out a pice of logic from iomap_file_buffered_write_punch_delalloc
that is useful for all iomap_end implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
In addition to 'active-low' and 'inactive-high-impedance' also
support 'active-high' property for PHY LED pin configuration.
As only either 'active-high' or 'active-low' can be set at the
same time, WARN and return an error in case both are set.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/91598487773d768f254d5faf06cf65b13e972f0e.1728558223.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The last callsite of iommu_present() is removed by commit <45c690aea8ee>
("drm/tegra: Use iommu_paging_domain_alloc()"). Remove it to avoid dead
code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241009051808.29455-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The DisCo for SoundWire 2.0 spec adds support for a new
sdw-manager-list property. Add it in backwards-compatible mode with
'sdw-master-count', which assumed that all links between 0..count-1
exist.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241001070611.63288-5-yung-chuan.liao@linux.intel.com
|
|
The new "kmem_cache" iterator will traverse the list of slab caches
and call attached BPF programs for each entry. It should check the
argument (ctx.s) if it's NULL before using it.
Now the iteration grabs the slab_mutex only if it traverse the list and
releases the mutex when it runs the BPF program. The kmem_cache entry
is protected by a refcount during the execution.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz> #slab
Link: https://lore.kernel.org/r/20241010232505.1339892-2-namhyung@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
