| Age | Commit message (Collapse) | Author |
|---|
|
The helper is better optimized for the worst case: in case of empty
cpumask, current code traverses 2 * size:
next = cpumask_next_and(prev, src1p, src2p);
if (next >= nr_cpu_ids)
next = cpumask_first_and(src1p, src2p);
At bitmap level we can stop earlier after checking 'size + offset' bits.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The difference between for_each_cpu() and for_each_set_bit()
is that the latter uses cpumask_next() instead of find_next_bit(),
and so calls cpumask_check().
This check is useless because the iterator value is not provided by
user. It generates false-positives for the very last iteration
of for_each_cpu().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The functions require to be passed with a cpu index prior to one that is
the first to start search, so the valid input range is [-1, nr_cpu_ids-1).
However, the code checks against [-1, nr_cpu_ids).
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
For the entire history of the devm_clk_release_clkdev() existence
(since 2018) it was never used. Remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220623115719.52683-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
For the entire history of the devm_of_clk_del_provider) existence
(since 2017) it was never used. Remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220623115719.52683-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
of_device_is_compatible() accepts const device node pointer, there is
no reason why of_device_compatible_match() can't do the same.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/YzY5MaU5N4A2st5R@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Merge changes related to ACPI device enumeration and ACPI support for
platform devices for 6.1-rc1:
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry).
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen).
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv).
* acpi-scan:
LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA
ACPI: scan: Support multiple DMA windows with different offsets
* acpi-bus:
ACPI: bus: Refactor ACPI matching functions for better readability
ACPI: bus: Drop kernel doc annotation from acpi_bus_notify()
ACPI: bus: Remove the unneeded result variable
* acpi-platform:
ACPI: platform: Use PLATFORM_DEVID_NONE in acpi_create_platform_device()
ACPI: platform: Sort forbidden_id_list[] in ascending order
ACPI: platform: Use sizeof(*pointer) instead of sizeof(type)
ACPI: platform: Remove redundant print on -ENOMEM
ACPI: platform: Get rid of redundant 'else'
|
|
Merge ACPI resource management and ACPI power management chages for
6.1-rc1:
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus).
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw).
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus).
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello).
* acpi-resource:
ACPI: resource: Add ASUS model S5402ZA to quirks
usb: typec: intel_pmc_mux: Use the helper acpi_dev_get_memory_resources()
ACPI: resource: Skip IRQ override on Asus Vivobook K3402ZA/K3502ZA
ACPI: LPSS: Use the helper acpi_dev_get_memory_resources()
ACPI: APD: Use the helper acpi_dev_get_memory_resources()
ACPI: resource: Add helper function acpi_dev_get_memory_resources()
ACPI: resource: Filter out the non memory resources in is_memory()
* acpi-pm:
ACPI: x86: s2idle: Add another ID to s2idle_dmi_table
ACPI: x86: s2idle: Fix a NULL pointer dereference
ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13
ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7
ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14
ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE
ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID
ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt
ACPI: x86: s2idle: Move _HID handling for AMD systems into structures
ACPI: PM: Fix acpi_dev_state_d0() kerneldoc
|
|
Merge changes regarding the management of ACPI device objects for
6.1-rc1:
- Rename ACPI device object reference counting functions (Rafael
Wysocki).
- Rearrange ACPI device object initialization code (Rafael Wysocki).
- Drop parent field from struct acpi_device (Rafael Wysocki).
- Extend the the int3472-tps68470 driver to support multiple consumers
of a single TPS68470 along with the requisite framework-level
support (Daniel Scally).
* acpi-dev:
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
ACPI: property: Use acpi_dev_parent()
ACPI: Drop redundant acpi_dev_parent() header
ACPI: PM: Fix NULL argument handling in acpi_device_get/set_power()
ACPI: Drop parent field from struct acpi_device
ACPI: scan: Eliminate __acpi_device_add()
ACPI: scan: Rearrange initialization of ACPI device objects
ACPI: scan: Rename acpi_bus_get_parent() and rearrange it
ACPI: Rename acpi_bus_get/put_acpi_device()
|
|
On one of the Chrome system, if we define more than 12 trip points,
probe for thermal sensor fails with
"int3403 thermal: probe of INTC1046:03 failed with error -22"
and throws an error as
"thermal_sys: Error: Incorrect number of thermal trips".
The thermal_zone_device_register() interface needs maximum
number of trip points supported in a zone as an argument.
This number can't exceed THERMAL_MAX_TRIPS, which is currently
set to 12. To address this issue, THERMAL_MAX_TRIPS value
has to be increased.
This interface also has an argument to specify a mask of trips
which are writable. This mask is defined as an int.
This mask sets the ceiling for increasing maximum number of
supported trips. With the current implementation, maximum number
of trips can be supported is 31.
Also, THERMAL_MAX_TRIPS macro is used in one place only.
So, remove THERMAL_MAX_TRIPS macro and compare num_trips
directly with using a macro BITS_PER_TYPE(int)-1.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.1
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
- refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
- support CYW43439 SDIO chipset
- support BCM4378 on Apple platforms
- support CYW89459 PCIe chipset
rtw89
- more work to get rtw8852c supported
- P2P support
- support for enabling and disabling MSDU aggregation via nl80211
mt76
- tx status reporting improvements
ath11k
- cold boot calibration support on WCN6750
- Target Wake Time (TWT) debugfs support for STA interface
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- implement SRAM dump debugfs interface
- enable threaded NAPI on all hardware
- WoW support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
wcn36xx
- add SNR from a received frame as a source of system entropy
* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
wifi: rtw89: 8852b: configure DLE mem
wifi: rtw89: check DLE FIFO size with reserved size
wifi: rtw89: mac: correct register of report IMR
wifi: rtw89: pci: set power cut closed for 8852be
wifi: rtw89: pci: add to do PCI auto calibration
wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add DMA busy checking bits to chip info
wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
wifi: rtw89: pci: mask out unsupported TX channels
iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
wifi: iwlwifi: Track scan_cmd allocation size explicitly
brcmfmac: Remove the call to "dtim_assoc" IOVAR
brcmfmac: increase dcmd maximum buffer size
brcmfmac: Support 89459 pcie
brcmfmac: increase default max WOWL patterns to 16
cw1200: fix incorrect check to determine if no element is found in list
...
====================
Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UMR MTTs used in striding RQ have certain alignment requirements. While
it's guaranteed to work when UMR pages are aligned to the UMR page size,
in practice it works then UMR pages are aligned to 8 bytes. However,
it's still not enough flexibility for the unaligned mode of XSK. This
patch leverages KSM to map UMR pages without alignment requirements,
when unaligned XSK is active. The downside is that KSM entries are twice
as big as MTTs, which limits the maximum WQE size, so regular RQs and
aligned XSK continue using MTTs.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit allows striding RQ to determine MTT page size at runtime,
instead of sticking to the compile-time PAGE_SIZE. This functionality
will be used by a following commit that adjusts the MTT page size to the
XSK frame size.
Stick with PAGE_SIZE for XSK on legacy RQ, as frag_stride is not used in
data path, it only helps calculate how pages are partitioned into
fragments, and PAGE_SIZE will ensure each fragment starts at the
beginning of a new allocation unit (XSK frame).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a helper blk_rq_map_user_io for mapping of vectored as well as
non-vectored requests. This will help in saving dupilcation of code at few
places in scsi and nvme.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-4-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add IORING_URING_CMD_FIXED flag that is to be used for sending io_uring
command with previously registered buffers. User-space passes the buffer
index in sqe->buf_index, same as done in read/write variants that uses
fixed buffers.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-3-anuj20.g@samsung.com
[axboe: shuffle valid flags check before acting on it]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is a new helper that callers can use to obtain a bvec iterator for
the previously mapped buffer. This is preparatory work to enable
fixed-buffer support for io_uring_cmd.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-2-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With end_io handlers now being able to potentially pass ownership of
the request upon completion, we can allow requests with end_io handlers
in the batch completion handling.
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-6.1/io_uring: (56 commits)
io_uring/net: fix notif cqe reordering
io_uring/net: don't update msg_name if not provided
io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
io_uring/rw: defer fsnotify calls to task context
io_uring/net: fix fast_iov assignment in io_setup_async_msg()
io_uring/net: fix non-zc send with address
io_uring/net: don't skip notifs for failed requests
io_uring/rw: don't lose short results on io_setup_async_rw()
io_uring/rw: fix unexpected link breakage
io_uring/net: fix cleanup double free free_iov init
io_uring: fix CQE reordering
io_uring/net: fix UAF in io_sendrecv_fail()
selftest/net: adjust io_uring sendzc notif handling
io_uring: ensure local task_work marks task as running
io_uring/net: zerocopy sendmsg
io_uring/net: combine fail handlers
io_uring/net: rename io_sendzc()
io_uring/net: support non-zerocopy sendto
io_uring/net: refactor io_setup_async_addr
io_uring/net: don't lose partial send_zc on fail
...
|
|
* for-6.1/block: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The COUNTER_COMP_ARRAY Counter component type is introduced to enable
support for Counter array components. With Counter array components,
exposure for buffers on counter devices can be defined via new Counter
array component macros. This should simplify code for driver authors who
would otherwise need to define individual Counter components for each
array element.
Eight Counter array component macros are introduced::
DEFINE_COUNTER_ARRAY_U64(_name, _length)
DEFINE_COUNTER_ARRAY_CAPTURE(_name, _length)
DEFINE_COUNTER_ARRAY_POLARITY(_name, _enums, _length)
COUNTER_COMP_DEVICE_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_COUNT_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_SIGNAL_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_ARRAY_CAPTURE(_read, _write, _array)
COUNTER_COMP_ARRAY_POLARITY(_read, _write, _array)
Eight Counter array callbacks are introduced as well::
int (*signal_array_u32_read)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u32 *val);
int (*signal_array_u32_write)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u32 val);
int (*device_array_u64_read)(struct counter_device *counter,
size_t idx, u64 *val);
int (*count_array_u64_read)(struct counter_device *counter,
struct counter_count *count,
size_t idx, u64 *val);
int (*signal_array_u64_read)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u64 *val);
int (*device_array_u64_write)(struct counter_device *counter,
size_t idx, u64 val);
int (*count_array_u64_write)(struct counter_device *counter,
struct counter_count *count,
size_t idx, u64 val);
int (*signal_array_u64_write)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u64 val);
Driver authors can handle reads/writes for an array component by
receiving an element index via the `idx` parameter and processing the
respective value via the `val` parameter.
For example, suppose a driver wants to expose a Count's read-only
capture buffer of four elements using a callback
`foobar_capture_read()`::
DEFINE_COUNTER_ARRAY_CAPTURE(foobar_capture_array, 4);
COUNTER_COMP_ARRAY_CAPTURE(foobar_capture_read, NULL,
foobar_capture_array)
Respective sysfs attributes for each array element would appear for the
respective Count:
* /sys/bus/counter/devices/counterX/countY/capture0
* /sys/bus/counter/devices/counterX/countY/capture1
* /sys/bus/counter/devices/counterX/countY/capture2
* /sys/bus/counter/devices/counterX/countY/capture3
If a user tries to read _capture2_ for example, `idx` will be `2` when
passed to the `foobar_capture_read()` callback, and thus the driver
knows which array element to handle.
Counter arrays for polarity elements can be defined in a similar
manner as u64 elements::
const enum counter_signal_polarity foobar_polarity_states[] = {
COUNTER_SIGNAL_POLARITY_POSITIVE,
COUNTER_SIGNAL_POLARITY_NEGATIVE,
};
DEFINE_COUNTER_ARRAY_POLARITY(foobar_polarity_array,
foobar_polarity_states, 4);
COUNTER_COMP_ARRAY_POLARITY(foobar_polarity_read,
foobar_polarity_write,
foobar_polarity_array)
Tested-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/5310c22520aeae65b1b74952419f49ac4c8e1ec1.1664204990.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/a51fd608704bdfc5a0efa503fc5481df34241e0a.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some devices provide a latch function to save historic Count values.
This patch standardizes exposure of such functionality as Count capture
components. A COUNTER_COMP_CAPTURE macro is provided for driver authors
to define a capture component. A new event COUNTER_EVENT_CAPTURE is
introduced to represent Count value capture events.
Cc: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/c239572ab4208d0d6728136e82a88ad464369a7a.1664204990.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/3cebaa0b807a225eb277d771504fe6dba7269ffd.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Signal polarity component represents the active level of a
respective Signal. There are two possible states: positive (rising edge)
and negative (falling edge); enum counter_signal_polarity represents
these states. A convenience macro COUNTER_COMP_POLARITY() is provided
for driver authors to declare a Signal polarity component.
Cc: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/8f47d6e1db71a11bb1e2666f8e2a6e9d256d4131.1664204990.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/b6e53438badcb6318997d13dd2fc052f97d808ac.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit fixes a bug in the tracking of max_packets_out and
is_cwnd_limited. This bug can cause the connection to fail to remember
that is_cwnd_limited is true, causing the connection to fail to grow
cwnd when it should, causing throughput to be lower than it should be.
The following event sequence is an example that triggers the bug:
(a) The connection is cwnd_limited, but packets_out is not at its
peak due to TSO deferral deciding not to send another skb yet.
In such cases the connection can advance max_packets_seq and set
tp->is_cwnd_limited to true and max_packets_out to a small
number.
(b) Then later in the round trip the connection is pacing-limited (not
cwnd-limited), and packets_out is larger. In such cases the
connection would raise max_packets_out to a bigger number but
(unexpectedly) flip tp->is_cwnd_limited from true to false.
This commit fixes that bug.
One straightforward fix would be to separately track (a) the next
window after max_packets_out reaches a maximum, and (b) the next
window after tp->is_cwnd_limited is set to true. But this would
require consuming an extra u32 sequence number.
Instead, to save space we track only the most important
information. Specifically, we track the strongest available signal of
the degree to which the cwnd is fully utilized:
(1) If the connection is cwnd-limited then we remember that fact for
the current window.
(2) If the connection not cwnd-limited then we track the maximum
number of outstanding packets in the current window.
In particular, note that the new logic cannot trigger the buggy
(a)/(b) sequence above because with the new logic a condition where
tp->packets_out > tp->max_packets_out can only trigger an update of
tp->is_cwnd_limited if tp->is_cwnd_limited is false.
This first showed up in a testing of a BBRv2 dev branch, but this
buggy behavior highlighted a general issue with the
tcp_cwnd_validate() logic that can cause cwnd to fail to increase at
the proper rate for any TCP congestion control, including Reno or
CUBIC.
Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME. That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.
The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.
Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.
Thanks Jan Kara for suggestions on how to make this work properly.
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
submit_bh/submit_bh_wbc are non-blocking functions which just submit
the bio and return. The caller of submit_bh/submit_bh_wbc needs to wait
on buffer till I/O completion and then check buffer head's b_state field
to know if there was any I/O error.
Hence there is no need for these functions to have any return type.
Even now they always returns 0. Hence drop the return value and make
their return type as void to avoid any confusion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/cb66ef823374cdd94d2d03083ce13de844fffd41.1660788334.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When adding optional new features to Qdisc offloads, existing drivers
must reject the new configuration until they are coded up to act on it.
Since modifying all drivers in lockstep with the changes in the Qdisc
can create problems of its own, it would be nice if there existed an
automatic opt-in mechanism for offloading optional features.
Jakub proposes that we multiplex one more kind of call through
ndo_setup_tc(): one where the driver populates a Qdisc-specific
capability structure.
First user will be taprio in further changes. Here we are introducing
the definitions for the base functionality.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220923163310.3192733-3-vladimir.oltean@nxp.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 3226b158e67c ("net: avoid 32 x truesize under-estimation
for tiny skbs") we are observing 10-20% regressions in performance
tests with small packets. The perf trace points to high pressure on
the slab allocator.
This change tries to improve the allocation schema for small packets
using an idea originally suggested by Eric: a new per CPU page frag is
introduced and used in __napi_alloc_skb to cope with small allocation
requests.
To ensure that the above does not lead to excessive truesize
underestimation, the frag size for small allocation is inflated to 1K
and all the above is restricted to build with 4K page size.
Note that we need to update accordingly the run-time check introduced
with commit fd9ea57f4e95 ("net: add napi_get_frags_check() helper").
Alex suggested a smart page refcount schema to reduce the number
of atomic operations and deal properly with pfmemalloc pages.
Under small packet UDP flood, I measure a 15% peak tput increases.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Alexander H Duyck <alexanderduyck@fb.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/6b6f65957c59f86a353fc09a5127e83a32ab5999.1664350652.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add devm_clk_hw_register_fixed_rate(), devres-managed helper to register
fixed-rate clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220916061740.87167-3-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Rewrite clk-asm9260 to use parent index to use the reference clock.
During this rework two helpers are added:
- clk_hw_register_mux_table_parent_data() to supplement
clk_hw_register_mux_table() but using parent_data instead of
parent_names
- clk_hw_register_fixed_rate_parent_accuracy() to be used instead of
directly calling __clk_hw_register_fixed_rate(). The later function is
an internal API, which is better not to be called directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220916061740.87167-2-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
With commit 987f20a9dcce ("a.out: Remove the a.out implementation"), the
use of the special taso flag for alpha architectures in the linux_binprm
struct is gone.
Remove the definition of taso in the linux_binprm struct.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220929203903.9475-1-lukas.bulwahn@gmail.com
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When possible at compile-time, make use of smaller types in
prandom_u32_max(), so that we can use smaller batches from random.c,
which in turn leads to a 2x or 4x performance boost. This makes a
difference, for example, in kfence, which needs a fast stream of small
numbers (booleans).
At the same time, we use the occasion to update the old documentation on
these functions. prandom_u32() and prandom_bytes() have direct
replacements now in random.h, while prandom_u32_max() remains useful as
a prandom.h function, since it's not cryptographically secure by virtue
of not being evenly distributed.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
There are numerous places in the kernel that would be sped up by having
smaller batches. Currently those callsites do `get_random_u32() & 0xff`
or similar. Since these are pretty spread out, and will require patches
to multiple different trees, let's get ahead of the curve and lay the
foundation for `get_random_u8()` and `get_random_u16()`, so that it's
then possible to start submitting conversion patches leisurely.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The full RNG initialization relies on some timestamps, made possible
with initialization functions like time_init() and timekeeping_init().
However, these are only available rather late in initialization.
Meanwhile, other things, such as memory allocator functions, make use of
the RNG much earlier.
So split RNG initialization into two phases. We can provide arch
randomness very early on, and then later, after timekeeping and such are
available, initialize the rest.
This ensures that, for example, slabs are properly randomized if RDRAND
is available. Without this, CONFIG_SLAB_FREELIST_RANDOM=y loses a degree
of its security, because its random seed is potentially deterministic,
since it hasn't yet incorporated RDRAND. It also makes it possible to
use a better seed in kfence, which currently relies on only the cycle
counter.
Another positive consequence is that on systems with RDRAND, running
with CONFIG_WARN_ALL_UNSEEDED_RANDOM=y results in no warnings at all.
One subtle side effect of this change is that on systems with no RDRAND,
RDTSC is now only queried by random_init() once, committing the moment
of the function call, instead of multiple times as before. This is
intentional, as the multiple RDTSCs in a loop before weren't
accomplishing very much, with jitter being better provided by
try_to_generate_entropy(). Plus, filling blocks with RDTSC is still
being done in extract_entropy(), which is necessarily called before
random bytes are served anyway.
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When a bad bpf prog '.init' calls
bpf_setsockopt(TCP_CONGESTION, "itself"), it will trigger this loop:
.init => bpf_setsockopt(tcp_cc) => .init => bpf_setsockopt(tcp_cc) ...
... => .init => bpf_setsockopt(tcp_cc).
It was prevented by the prog->active counter before but the prog->active
detection cannot be used in struct_ops as explained in the earlier
patch of the set.
In this patch, the second bpf_setsockopt(tcp_cc) is not allowed
in order to break the loop. This is done by using a bit of
an existing 1 byte hole in tcp_sock to check if there is
on-going bpf_setsockopt(TCP_CONGESTION) in this tcp_sock.
Note that this essentially limits only the first '.init' can
call bpf_setsockopt(TCP_CONGESTION) to pick a fallback cc (eg. peer
does not support ECN) and the second '.init' cannot fallback to
another cc. This applies even the second
bpf_setsockopt(TCP_CONGESTION) will not cause a loop.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220929070407.965581-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The struct_ops prog is to allow using bpf to implement the functions in
a struct (eg. kernel module). The current usage is to implement the
tcp_congestion. The kernel does not call the tcp-cc's ops (ie.
the bpf prog) in a recursive way.
The struct_ops is sharing the tracing-trampoline's enter/exit
function which tracks prog->active to avoid recursion. It is
needed for tracing prog. However, it turns out the struct_ops
bpf prog will hit this prog->active and unnecessarily skipped
running the struct_ops prog. eg. The '.ssthresh' may run in_task()
and then interrupted by softirq that runs the same '.ssthresh'.
Skip running the '.ssthresh' will end up returning random value
to the caller.
The patch adds __bpf_prog_{enter,exit}_struct_ops for the
struct_ops trampoline. They do not track the prog->active
to detect recursion.
One exception is when the tcp_congestion's '.init' ops is doing
bpf_setsockopt(TCP_CONGESTION) and then recurs to the same
'.init' ops. This will be addressed in the following patches.
Fixes: ca06f55b9002 ("bpf: Add per-program recursion prevention mechanism")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
* irq/misc-6.1:
: .
: Misc irqchip updates for 6.1:
:
: - Allow generic irqchip support without selecting CONFIG_OF_IRQ
:
: - Fix a couple of bindings for TI interrupts controllers
:
: - Yet another binding update for a Renesas SoC
:
: - The obligatory fixes from the spelling police
: .
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Make irqchip_init() usable on pure ACPI systems
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This is simillar as fixed-regulator.
Used to extract regulator parent from the device tree.
Without that property used, the parent regulator can be shut down (if not an always on).
Thus leading to inappropriate behavior:
On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20220929132526.29427-2-jneanne@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
User processes may require many events and when they do the cache
performance of a byte index status check is less ideal than a bit index.
The previous event limit per-page was 4096, the new limit is 32,768.
This change adds a bitwise index to the user_reg struct. Programs check
that the bit at status_bit has a bit set within the status page(s).
Link: https://lkml.kernel.org/r/20220728233309.1896-6-beaub@linux.microsoft.com
Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The current implementation of blk_mq_plug() disables plugging for all
operations that involves a transfer to the device as we just check if
the last bit in op_is_write() function.
Modify blk_mq_plug() to disable plugging only for REQ_OP_WRITE and
REQ_OP_WRITE_ZEROS as they might require a zone lock.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220929074745.103073-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kernel/printk/printk.c:365:1: warning: symbol 'log_wait' was not declared. Should it be static?
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220924000454.3319186-3-john.ogness@linutronix.de
|
|
No user outside the printk code and no reason to export this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220924000454.3319186-2-john.ogness@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Three late patches to fix problems discovered recently:
- Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)
- Two patches to fix setting the maximum queue depth of libsas owned
ATA devices (from me)"
* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Fix device queue depth control
ata: libata-scsi: Fix initialization of device queue depth
libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
|
|
Merge upstream to get RAPTORLAKE_S
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
The first two patches from a series by Kees Cook [1] that introduce
kmalloc_size_roundup(). This will allow merging of per-subsystem patches using
the new function and ultimately stop (ab)using ksize() in a way that causes
ongoing trouble for debugging functionality and static checkers.
[1] https://lore.kernel.org/all/20220923202822.2667581-1-keescook@chromium.org/
--
Resolved a conflict of modifying mm/slab.c __ksize() comment with a commit that
unifies __ksize() implementation into mm/slab_common.c
|
|
A patch from Feng Tang that enhances the existing debugfs alloc_traces
file for kmalloc caches with information about how much space is wasted
by allocations that needs less space than the particular kmalloc cache
provides.
|
|
In the effort to help the compiler reason about buffer sizes, the
__alloc_size attribute was added to allocators. This improves the scope
of the compiler's ability to apply CONFIG_UBSAN_BOUNDS and (in the near
future) CONFIG_FORTIFY_SOURCE. For most allocations, this works well,
as the vast majority of callers are not expecting to use more memory
than what they asked for.
There is, however, one common exception to this: anticipatory resizing
of kmalloc allocations. These cases all use ksize() to determine the
actual bucket size of a given allocation (e.g. 128 when 126 was asked
for). This comes in two styles in the kernel:
1) An allocation has been determined to be too small, and needs to be
resized. Instead of the caller choosing its own next best size, it
wants to minimize the number of calls to krealloc(), so it just uses
ksize() plus some additional bytes, forcing the realloc into the next
bucket size, from which it can learn how large it is now. For example:
data = krealloc(data, ksize(data) + 1, gfp);
data_len = ksize(data);
2) The minimum size of an allocation is calculated, but since it may
grow in the future, just use all the space available in the chosen
bucket immediately, to avoid needing to reallocate later. A good
example of this is skbuff's allocators:
data = kmalloc_reserve(size, gfp_mask, node, &pfmemalloc);
...
/* kmalloc(size) might give us more room than requested.
* Put skb_shared_info exactly at the end of allocated zone,
* to allow max possible filling before reallocation.
*/
osize = ksize(data);
size = SKB_WITH_OVERHEAD(osize);
In both cases, the "how much was actually allocated?" question is answered
_after_ the allocation, where the compiler hinting is not in an easy place
to make the association any more. This mismatch between the compiler's
view of the buffer length and the code's intention about how much it is
going to actually use has already caused problems[1]. It is possible to
fix this by reordering the use of the "actual size" information.
We can serve the needs of users of ksize() and still have accurate buffer
length hinting for the compiler by doing the bucket size calculation
_before_ the allocation. Code can instead ask "how large an allocation
would I get for a given size?".
Introduce kmalloc_size_roundup(), to serve this function so we can start
replacing the "anticipatory resizing" uses of ksize().
[1] https://github.com/ClangBuiltLinux/linux/issues/1599
https://github.com/KSPP/linux/issues/183
[ vbabka@suse.cz: add SLOB version ]
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The __malloc attribute should not be applied to "realloc" functions, as
the returned pointer may alias the storage of the prior pointer. Instead
of splitting __malloc from __alloc_size, which would be a huge amount of
churn, just create __realloc_size for the few cases where it is needed.
Thanks to Geert Uytterhoeven <geert@linux-m68k.org> for reporting build
failures with gcc-8 in earlier version which tried to remove the #ifdef.
While the "alloc_size" attribute is available on all GCC versions, I
forgot that it gets disabled explicitly by the kernel in GCC < 9.1 due
to misbehaviors. Add a note to the compiler_attributes.h entry for it.
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: linux-mm@kvack.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
