| Age | Commit message (Collapse) | Author |
|---|
|
The devm_regulator_get_enable() should be a 'call and forget' API,
meaning, when it is used to enable the regulators, the API does not
provide a handle to do any further control of the regulators. It gives
no real benefit to return an error from the stub if CONFIG_REGULATOR is
not set.
On the contrary, returning and error is causing problems to drivers when
hardware is such it works out just fine with no regulator control.
Returning an error forces drivers to specifically handle the case where
CONFIG_REGULATOR is not set, making the mere existence of the stub
questionalble. Furthermore, the stub of the regulator_enable() seems to
be returning Ok.
Change the stub implementation for the devm_regulator_get_enable() to
return Ok so drivers do not separately handle the case where the
CONFIG_REGULATOR is not set.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Aleksander Mazur <deweloper@wp.pl>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZiYF6d1V1vSPcsJS@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux into for-6.10/io_uring
Merge net changes required for the upcoming send zerocopy improvements.
* 'for-uring-ubufops' of git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux:
net: add callback for setting a ubuf_info to skb
net: extend ubuf_info callback to ops structure
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pavel Begunkov says:
====================
implement io_uring notification (ubuf_info) stacking (net part)
To have per request buffer notifications each zerocopy io_uring send
request allocates a new ubuf_info. However, as an skb can carry only
one uarg, it may force the stack to create many small skbs hurting
performance in many ways.
The patchset implements notification, i.e. an io_uring's ubuf_info
extension, stacking. It attempts to link ubuf_info's into a list,
allowing to have multiple of them per skb.
liburing/examples/send-zerocopy shows up 6 times performance improvement
for TCP with 4KB bytes per send, and levels it with MSG_ZEROCOPY. Without
the patchset it requires much larger sends to utilise all potential.
bytes | before | after (Kqps)
1200 | 195 | 1023
4000 | 193 | 1386
8000 | 154 | 1058
====================
Link: https://lore.kernel.org/all/cover.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240422144850.2031076-1-andriy.shevchenko@linux.intel.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
At the moment an skb can only have one ubuf_info associated with it,
which might be a performance problem for zerocopy sends in cases like
TCP via io_uring. Add a callback for assigning ubuf_info to skb, this
way we will implement smarter assignment later like linking ubuf_info
together.
Note, it's an optional callback, which should be compatible with
skb_zcopy_set(), that's because the net stack might potentially decide
to clone an skb and take another reference to ubuf_info whenever it
wishes. Also, a correct implementation should always be able to bind to
an skb without prior ubuf_info, otherwise we could end up in a situation
when the send would not be able to progress.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/b7918aadffeb787c84c9e72e34c729dc04f3a45d.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to associate additional callbacks with ubuf_info, introduce
a structure holding ubuf_info callbacks. Apart from a more smarter
io_uring notification management introduced in next patches, it can be
used to generalise msg_zerocopy_put_abort() and also store
->sg_from_iter, which is currently passed in struct msghdr.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/a62015541de49c0e2a8a0377a1d5d0a5aeb07016.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CQE mode or DIM state is changed, gracefully reconfigure channels to
handle new configuration. Previously, would create new channels that would
reflect the changes rather than update the original channels.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use core DIM CQ period mode enum values for the CQ parameter for the period
mode. Translate the value to the specific mlx5 device constant for the
selected period mode when creating a CQ. Avoid needing to translate mlx5
device constants to DIM constants for core DIM functionality.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Complete switching the __iowriteXX_copy() routines over to use #define and
arch provided inline/macro functions instead of weak symbols.
S390 has an implementation that simply calls another memcpy
function. Inline this so the callers don't have to do two jumps.
Link: https://lore.kernel.org/r/3-v3-1893cd8b9369+1925-mlx5_arm_wc_jgg@nvidia.com
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Start switching iomap_copy routines over to use #define and arch provided
inline/macro functions instead of weak symbols.
Inline functions allow more compiler optimization and this is often a
driver hot path.
x86 has the only weak implementation for __iowrite32_copy(), so replace it
with a static inline containing the same single instruction inline
assembly. The compiler will generate the "mov edx,ecx" in a more optimal
way.
Remove iomap_copy_64.S
Link: https://lore.kernel.org/r/1-v3-1893cd8b9369+1925-mlx5_arm_wc_jgg@nvidia.com
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Previously, it was using "remaining args" without leading "@" which isn't
valid. Let's follow snprintf()'s example and use "@...".
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an NFS/RDMA performance regression in v6.9-rc
* tag 'nfsd-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "svcrdma: Add Write chunk WRs to the RPC's Send WR chain"
|
|
Our provided buffer interface only allows selection of a single buffer.
Add an API that allows getting/peeking multiple buffers at the same time.
This is only implemented for the ring provided buffers. It could be added
for the legacy provided buffers as well, but since it's strongly
encouraged to use the new interface, let's keep it simpler and just
provide it for the new API. The legacy interface will always just select
a single buffer.
There are two new main functions:
io_buffers_select(), which selects up as many buffers as it can. The
caller supplies the iovec array, and io_buffers_select() may allocate a
bigger array if the 'out_len' being passed in is non-zero and bigger
than what fits in the provided iovec. Buffers grabbed with this helper
are permanently assigned.
io_buffers_peek(), which works like io_buffers_select(), except they can
be recycled, if needed. Callers using either of these functions should
call io_put_kbufs() rather than io_put_kbuf() at completion time. The
peek interface must be called with the ctx locked from peek to
completion.
This add a bit state for the request:
- REQ_F_BUFFERS_COMMIT, which means that the the buffers have been
peeked and should be committed to the buffer ring head when they are
put as part of completion. Prior to this, req->buf_list was cleared to
NULL when committed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This function was introduced with commit 60bda037f1dd ("posix-cpu-timers:
Utilize timerqueue for storage") but never used. Remove it.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240417140229.19633-1-anna-maria@linutronix.de
|
|
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux 6.9-rc5
I've had a persistent msm failure on clang, and the fix is in fixes
so just pull it back to fix that.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.9-rc5.
Included in here are the following:
- binder driver fix for reported problem
- speakup crash fix
- mei driver fixes for reported problems
- comdei driver fix
- interconnect driver fixes
- rtsx driver fix
- peci.h kernel doc fix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
peci: linux/peci.h: fix Excess kernel-doc description warning
binder: check offset alignment in binder_get_object()
comedi: vmk80xx: fix incomplete endpoint checking
mei: vsc: Unregister interrupt handler for system suspend
Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
misc: rtsx: Fix rts5264 driver status incorrect when card removed
mei: me: disable RPL-S on SPS and IGN firmwares
speakup: Avoid crash on very long word
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
|
|
Pull block fixes from Jens Axboe:
"Just two minor fixes that should go into the 6.9 kernel release, one
fixing a regression with partition scanning errors, and one fixing a
WARN_ON() that can get triggered if we race with a timer"
* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
blk-iocost: do not WARN if iocg was already offlined
block: propagate partition scanning errors to the BLKRRPART ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple clk driver fixes, a build fix, and a deadlock fix:
- Mediatek mt7988 has broken PCIe because the wrong parent is used
- Mediatek clk drivers may deadlock when registering their clks
because the clk provider device is repeatedly runtime PM resumed
and suspended during probe and clk registration.
Resuming the clk provider device deadlocks with an ABBA deadlock
due to genpd_lock and the clk prepare_lock. The fix is to keep the
device runtime resumed while registering clks.
- Another runtime PM related deadlock, this time with disabling
unused clks during late init.
We get an ABBA deadlock where a device is runtime PM resuming (or
suspending) while the disabling of unused clks is happening in
parallel. That runtime PM action calls into the clk framework and
tries to grab the clk prepare_lock while the disabling of unused
clks holds the prepare_lock and is waiting for that runtime PM
action to complete.
The fix is to runtime resume all the clk provider devices before
grabbing the clk prepare_lock during disable unused.
- A build fix to provide an empty devm_clk_rate_exclusive_get()
function when CONFIG_COMMON_CLK=n"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port
clk: mediatek: Do a runtime PM get on controllers during probe
clk: Get runtime PM before walking tree for clk_summary
clk: Get runtime PM before walking tree during disable_unused
clk: Initialize struct clk_core kref earlier
clk: Don't hold prepare_lock when calling kref_put()
clk: Remove prepare_lock hold assertion in __clk_release()
clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()
|
|
Performance regression reported with NFS/RDMA using Omnipath,
bisected to commit e084ee673c77 ("svcrdma: Add Write chunk WRs to
the RPC's Send WR chain").
Tracing on the server reports:
nfsd-7771 [060] 1758.891809: svcrdma_sq_post_err:
cq.id=205 cid=226 sc_sq_avail=13643/851 status=-12
sq_post_err reports ENOMEM, and the rdma->sc_sq_avail (13643) is
larger than rdma->sc_sq_depth (851). The number of available Send
Queue entries is always supposed to be smaller than the Send Queue
depth. That seems like a Send Queue accounting bug in svcrdma.
As it's getting to be late in the 6.9-rc cycle, revert this commit.
It can be revisited in a subsequent kernel release.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218743
Fixes: e084ee673c77 ("svcrdma: Add Write chunk WRs to the RPC's Send WR chain")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This adds the needed backend ops for supporting a backend inerfacing
with an high speed dac. The new ops are:
* data_source_set();
* set_sampling_freq();
* extend_chan_spec();
* ext_info_set();
* ext_info_get().
Also to note the new helpers that are meant to be used by the backends
when extending an IIO channel (adding extended info):
* iio_backend_ext_info_set();
* iio_backend_ext_info_get().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-8-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Update the devm_iio_dmaengine_buffer_setup() function to support
specifying the buffer direction.
Update the iio_dmaengine_buffer_submit() function to handle input
buffers as well as output buffers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-4-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Adding write support to the buffer-dma code is easy - the write()
function basically needs to do the exact same thing as the read()
function: dequeue a block, read or write the data, enqueue the block
when entirely processed.
Therefore, the iio_buffer_dma_read() and the new iio_buffer_dma_write()
now both call a function iio_buffer_dma_io(), which will perform this
task.
Note that we preemptively reset block->bytes_used to the buffer's size
in iio_dma_buffer_request_update(), as in the future the
iio_dma_buffer_enqueue() function won't reset it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-3-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Change its name to iio_dma_buffer_usage(), as this function can be used
both for the .data_available and the .space_available callbacks.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-2-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This brings the DMA buffer API more in line with what we have in the
triggered buffer. There's no need of having both
devm_iio_dmaengine_buffer_setup() and devm_iio_dmaengine_buffer_alloc().
Hence we introduce the new iio_dmaengine_buffer_setup() that together
with devm_iio_dmaengine_buffer_setup() should be all we need.
Note that as part of this change iio_dmaengine_buffer_alloc() is again
static and the axi-adc was updated accordingly.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-1-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- Fix potential static_command_line buffer overrun.
Currently we allocate the memory for static_command_line based on
"boot_command_line", but it will copy "command_line" into it. So we
use the length of "command_line" instead of "boot_command_line" (as
we previously did)
- Use memblock_free_late() in xbc_exit() instead of memblock_free()
after the buddy system is initialized
- Fix a kerneldoc warning
* tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Fix the kerneldoc of _xbc_exit()
bootconfig: use memblock_free_late to free xbc memory to buddy
init/main.c: Fix potential static_command_line memory overflow
|
|
Add support to MMU caches for initializing a page with a custom 64-bit
value, e.g. to pre-fill an entire page table with non-zero PTE values.
The functionality will be used by x86 to support Intel's TDX, which needs
to set bit 63 in all non-present PTEs in order to prevent !PRESENT page
faults from getting reflected into the guest (Intel's EPT Violation #VE
architecture made the less than brilliant decision of having the per-PTE
behavior be opt-out instead of opt-in).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <5919f685f109a1b0ebc6bd8fc4536ee94bcc172d.1705965635.git.isaku.yamahata@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 9 are cc:stable and the remainder address post-6.8 issues
or aren't considered suitable for backporting.
There are a significant number of fixups for this cycle's page_owner
changes (series "page_owner: print stacks and their outstanding
allocations"). Apart from that, singleton changes all over, mainly in
MM"
* tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix OOB in nilfs_set_de_type
MAINTAINERS: update Naoya Horiguchi's email address
fork: defer linking file vma until vma is fully initialized
mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
mm,page_owner: defer enablement of static branch
Squashfs: check the inode number is not the invalid value of zero
mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
mm/userfaultfd: allow hugetlb change protection upon poison entry
mm,page_owner: fix printing of stack records
mm,page_owner: fix accounting of pages when migrating
mm,page_owner: fix refcount imbalance
mm,page_owner: update metadata for tail pages
userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE
mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly
|
|
Add basic implementation of the SCMI v3.2 pincontrol protocol.
Co-developed-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Co-developed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240418-pinctrl-scmi-v11-3-499dca9864a7@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
|
|
Pull fix for SEV-SNP late disable bugs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For selecting what link(s) out of the usable ones
to activate, calculate a grade for a given link.
Calculation of a link grade is done as follows:
1. get the estimated throughput according to the RSSI of the link, this
will be the base grade
2. get the channel load from the BSS Load Element, subtracting the load
caused by us. Apply the factor on the grade.
3. puncturing factor: calculate the percentage of the punctured
subchannels (out of the total subchannels). Apply this on the grade.
The link grading will be used by the link selection mechanism in a later
patch.
Also add KUnit tests for it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.a6799dbd5643.If137ca6dc443606c7d8c99ec1fc38b325003a7c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is not used anywhere in the driver so remove it. No functional
changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Integrate the regulator framework to the PSE framework for enhanced
access to features such as voltage, power measurement, and limits, which
are akin to regulators. Additionally, PSE features like port priorities
could potentially enhance the regulator framework. Note that this
integration introduces some implementation complexity, including wrapper
callbacks, but the potential benefits make it worthwhile.
Regulator are using enable counter with specific behavior.
Two calls to regulator_disable will trigger kernel warnings.
If the counter exceeds one, regulator_disable call won't disable the
PSE PI. These behavior isn't suitable for PSE control.
Added a boolean 'enabled' state to prevent multiple calls to
regulator_enable/disable. These calls will only be called from PSE
framework as it won't have any regulator children, therefore no mutex are
needed to safeguards this boolean.
regulator_get needs the consumer device pointer. Use PSE as regulator
provider and consumer device until we have RJ45 ports represented in
the Kernel.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-10-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement setup_pi_matrix callback to configure the PSE PI matrix. This
functionality is invoked before registering the PSE and following the core
parsing of the pse_pis devicetree subnode.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-9-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Power Sourcing Equipment Power Interface (PSE PI) plays a pivotal role
in the architecture of Power over Ethernet (PoE) systems. It is essentially
a blueprint that outlines how one or multiple power sources are connected
to the eight-pin modular jack, commonly known as the Ethernet RJ45 port.
This connection scheme is crucial for enabling the delivery of power
alongside data over Ethernet cables.
This patch adds support for getting the PSE controller node through PSE PI
device subnode.
This supports adds a way to get the PSE PI id from the pse_pi devicetree
subnode of a PSE controller node simply by reading the reg property.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-7-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce an enumeration to define PSE types (C33 or PoDL),
utilizing a bitfield for potential future support of both types.
Include 'pse_get_types' helper for external access to PSE type info.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-2-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current PSE interface for Ethernet Power Equipment, support is
limited to PoDL. This patch extends the interface to accommodate the
objects specified in IEEE 802.3-2022 145.2 for Power sourcing
Equipment (PSE).
The following objects are now supported and considered mandatory:
- IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus
- IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState
- IEEE 802.3-2022 30.9.1.2.1 aPSEAdminControl
To avoid confusion between "PoDL PSE" and "PoE PSE", which have similar
names but distinct values, we have followed the suggestion of Oleksij
Rempel and Andrew Lunn to maintain separate naming schemes for each,
using c33 (clause 33) prefix for "PoE PSE".
You can find more details in the discussion threads here:
https://lore.kernel.org/netdev/20230912110637.GI780075@pengutronix.de/
https://lore.kernel.org/netdev/2539b109-72ad-470a-9dae-9f53de4f64ec@lunn.ch/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-1-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/trace/events/rpcgss.h
386f4a737964 ("trace: events: cleanup deprecated strncpy uses")
a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field")
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_tc_lib.c
2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device")
784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
|
|
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint.
An invocation of the FFA_MSG_SEND2 transfers the ownership of the Tx
buffer to the receiver endpoint(or any intermediate consumer). Completion
of an FFA_MSG_SEND2 invocation transfers the ownership of the buffer
back to the sender endpoint.
The framework defines the FFA_MSG_SEND2 interface to transmit a partition
message from the Tx buffer of the sender to the Rx buffer of a receiver
and inform the scheduler that the receiver must be run.
Link: https://lore.kernel.org/r/20240417090931.2866487-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The properies obtained from the partition information descriptor as
part of initial partitions discovery is useful as it contain info
if the partition
- Runs in AArch64 or AArch32 execution state
- Can send and/or receive direct requests
- Can send and receive indirect message
- Does support receipt of notifications.
These can be used for querying before attempting to do any of the
above operations.
Link: https://lore.kernel.org/r/20240417090921.2866447-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use -ENOTSUPP consistently in Intel GPIO drivers
- don't include dt-bindings headers in gpio-swnode code
- add missing of device table to gpio-lpc32xx and fix autoloading
* tag 'gpio-fixes-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: swnode: Remove wrong header inclusion
gpio: lpc32xx: fix module autoloading
gpio: crystalcove: Use -ENOTSUPP consistently
gpio: wcove: Use -ENOTSUPP consistently
|
|
Commit 4601b4b130de ("block: reopen the device in blkdev_reread_part")
lost the propagation of I/O errors from the low-level read of the
partition table to the user space caller of the BLKRRPART.
Apparently some user space relies on, so restore the propagation. This
isn't exactly pretty as other block device open calls explicitly do not
are about these errors, so add a new BLK_OPEN_STRICT_SCAN to opt into
the error propagation.
Fixes: 4601b4b130de ("block: reopen the device in blkdev_reread_part")
Reported-by: Saranya Muruganandam <saranyamohan@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240417144743.2277601-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Standardize an assign_cpu function for cpumasks.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-4-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The renesas_usbhs_get_info() wrapper was useful for legacy board code.
Since commit 1fa59bda21c7fa36 ("ARM: shmobile: Remove legacy board code
for Armadillo-800 EVA") in v4.3, it is no longer used outside the USBHS
driver, and provides no added value over dev_get_platdata(), while
obfuscating the real operation.
Drop it, and replace it by dev_get_platdata() in its sole user.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/fa296af4452dfe394a58b75fd44c3bb9591936eb.1713282736.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Modules registering driver with amba_driver_register() often forget to
set .owner field. The field is used by some of other kernel parts for
reference counting (try_module_get()), so it is expected that drivers
will set it.
Solve the problem by moving this task away from the drivers to the core
amba bus code, just like we did for platform_driver in
commit 9447057eaff8 ("platform_device: use a macro instead of
platform_driver_register").
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-1-4517b091385b@linaro.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The flags in the software node properties are supposed to be
the GPIO lookup flags, which are provided by gpio/machine.h,
as the software nodes are the kernel internal thing and doesn't
need to rely to any of ABIs.
Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In the cases when gpio_is_valid() is called with unsigned parameter
the result is always true in the GPIO library code, hence the check
for false won't ever be true. Get rid of such calls.
While at it, move GPIO device base to be unsigned to clearly show
it won't ever be negative. This requires a new definition for the
maximum GPIO number in the system.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With the block layer zone write plugging being automatically done for
any write operation to a zone of a zoned block device, a regular request
plugging handled through current->plug can only ever see at most a
single write request per zone. In such case, any potential reordering
of the plugged requests will be harmless. We can thus remove the special
casing for write operations to zones and have these requests plugged as
well. This allows removing the function blk_mq_plug and instead directly
using current->plug where needed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-29-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
