| Age | Commit message (Collapse) | Author |
|---|
|
Move __kfunc_param_match_suffix() to btf.c and rename it as
btf_param_match_suffix(). It can be reused by bpf_struct_ops later.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240209023750.1153905-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Enable the providers to use types defined in a module instead of in the
kernel (btf_vmlinux).
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240209023750.1153905-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Currently tracing is supposed not to allow for bpf_spin_{lock,unlock}()
helper calls. This is to prevent deadlock for the following cases:
- there is a prog (prog-A) calling bpf_spin_{lock,unlock}().
- there is a tracing program (prog-B), e.g., fentry, attached
to bpf_spin_lock() and/or bpf_spin_unlock().
- prog-B calls bpf_spin_{lock,unlock}().
For such a case, when prog-A calls bpf_spin_{lock,unlock}(),
a deadlock will happen.
The related source codes are below in kernel/bpf/helpers.c:
notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
notrace is supposed to prevent fentry prog from attaching to
bpf_spin_{lock,unlock}().
But actually this is not the case and fentry prog can successfully
attached to bpf_spin_lock(). Siddharth Chintamaneni reported
the issue in [1]. The following is the macro definition for
above BPF_CALL_1:
#define BPF_CALL_x(x, name, ...) \
static __always_inline \
u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
typedef u64 (*btf_##name)(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)); \
u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)) \
{ \
return ((btf_##name)____##name)(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\
} \
static __always_inline \
u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__))
#define BPF_CALL_1(name, ...) BPF_CALL_x(1, name, __VA_ARGS__)
The notrace attribute is actually applied to the static always_inline function
____bpf_spin_{lock,unlock}(). The actual callback function
bpf_spin_{lock,unlock}() is not marked with notrace, hence
allowing fentry prog to attach to two helpers, and this
may cause the above mentioned deadlock. Siddharth Chintamaneni
actually has a reproducer in [2].
To fix the issue, a new macro NOTRACE_BPF_CALL_1 is introduced which
will add notrace attribute to the original function instead of
the hidden always_inline function and this fixed the problem.
[1] https://lore.kernel.org/bpf/CAE5sdEigPnoGrzN8WU7Tx-h-iFuMZgW06qp0KHWtpvoXxf1OAQ@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAE5sdEg6yUc_Jz50AnUXEEUh6O73yQ1Z6NV2srJnef0ZrQkZew@mail.gmail.com/
Fixes: d83525ca62cf ("bpf: introduce bpf_spin_lock")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240207070102.335167-1-yonghong.song@linux.dev
|
|
NVM Express TP4167 provides a way for controllers to report a relaxed
execution constraint. Specifically, it notifies of exclusivity for IO
vs. admin commands instead of grouping these together. If set, then we
don't need to freeze IO in order to execute that admin command. The
freezing distrupts IO processes, so it's nice to avoid that if the
controller tells us it's not necessary.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The RAPL framework uses CPU hotplug locking to protect the rapl_packages
list and rp->lead_cpu to guarantee that
1. the RAPL package device is not unprobed and freed
2. the cached rp->lead_cpu is always valid
for operations like powercap sysfs accesses.
Current RAPL APIs assume being called from CPU hotplug callbacks which
hold the CPU hotplug lock, but TPMI RAPL driver invokes the APIs in the
driver's .probe() function without acquiring the CPU hotplug lock.
Fix the problem by providing both locked and lockless versions of RAPL
APIs.
Fixes: 9eef7f9da928 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pass a queue_limits to blk_mq_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a queue_limits to blk_mq_init_queue and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also rename the function to blk_mq_alloc_queue as that is a much better
name for a function that allocates a queue and always pass the queuedata
argument instead of having a separate version for the extra argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new max_user_discard_sectors limit that mirrors max_user_sectors
and stores the value that the user manually set. This now allows
updates of the max_hw_discard_sectors to not worry about the user
limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new queue_limits_{start,commit}_update pair of functions that
allows taking an atomic snapshot of queue limits, update it, and
commit it if it passes validity checking. Also use the low-level
validation helper to implement blk_set_default_limits instead of
duplicating the initialization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The maximum number of open and active zones is a limit on the queue
and should be places there so that we can including it in the upcoming
queue limits batch update API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
And not by CONFIG_BPF. BPF can be selected while HID_BPF does not have
to. It actually cannot be on some platforms due to Kconfig dependences.
This saves quite some bytes on those setups.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add empty stub of gpio_device_get_label() when GPIOLIB is not enabled.
Cc: <stable@vger.kernel.org>
Fixes: d1f7728259ef ("gpiolib: provide gpio_device_get_label()")
Suggested-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add empty stub of gpio_device_get_base() when GPIOLIB is not enabled.
Cc: <stable@vger.kernel.org>
Fixes: 8c85a102fc4e ("gpiolib: provide gpio_device_get_base()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add empty stub of gpiod_to_gpio_device() when GPIOLIB is not enabled.
Cc: <stable@vger.kernel.org>
Fixes: 370232d096e3 ("gpiolib: provide gpiod_to_gpio_device()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
On architectures with delay slot, architecture level instruction
pointer (or program counter) in pt_regs may differ from where
exception was triggered.
Introduce exception_ip hook to invoke architecture code and determine
actual instruction pointer to the exception.
Link: https://lore.kernel.org/lkml/00d1b813-c55f-4365-8d81-d70258e10b16@app.fastmail.com/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CPU temperature can be negative in some cases. Thus the negative CPU
temperature should not be considered as a failure.
Fix intel_tcc_get_temp() and its users to support negative CPU
temperature.
Fixes: a3c1f066e1c5 ("thermal/intel: Introduce Intel TCC library")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add __pm_runtime_put_autosuspend() that replaces
pm_runtime_put_autosuspend() for new users. The intent is to later
re-purpose pm_runtime_put_autosuspend() to also mark the device's last
busy stamp---which is what the vast majority of users actually need.
This is also described in pm_runtime_put_autosuspend() documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are two ways to opportunistically increment a device's runtime PM
usage count, calling either pm_runtime_get_if_active() or
pm_runtime_get_if_in_use(). The former has an argument to tell whether to
ignore the usage count or not, and the latter simply calls the former with
ign_usage_count set to false. The other users that want to ignore the
usage_count will have to explicitly set that argument to true which is a
bit cumbersome.
To make this function more practical to use, remove the ign_usage_count
argument from the function. The main implementation is in a static
function called pm_runtime_get_conditional() and implementations of
pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to
runtime.c.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound/
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Block layer integrity processing assumes that protection information
(PI) is placed in the first bytes of each metadata block.
Remove this limitation and include the metadata before the PI in the
calculation of the guard tag.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Chinmay Gameti <c.gameti@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240201130126.211402-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that all callers pass in GFP_KERNEL to blkdev_zone_mgmt() and use
memalloc_no{io,fs}_{save,restore}() to define the allocation scope, we can
drop the gfp_mask parameter from blkdev_zone_mgmt() as well as
blkdev_zone_reset_all() and blkdev_zone_reset_all_emulated().
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240128-zonefs_nofs-v3-5-ae3b7c8def61@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix performance regression introduced by moving the security
permission hook out of do_clone_file_range() and into its caller
vfs_clone_file_range().
This causes the security hook to be called in situation were it
wasn't called before as the fast permission checks were left in
do_clone_file_range().
Fix this by merging the two implementations back together and
restoring the old ordering: fast permission checks first, expensive
ones later.
- Tweak mount_setattr() permission checking so that mount properties on
the real rootfs can be changed.
When we added mount_setattr() we added additional checks compared to
legacy mount(2). If the mount had a parent then verify that the
caller and the mount namespace the mount is attached to match and if
not make sure that it's an anonymous mount.
But the real rootfs falls into neither category. It is neither an
anoymous mount because it is obviously attached to the initial mount
namespace but it also obviously doesn't have a parent mount. So that
means legacy mount(2) allows changing mount properties on the real
rootfs but mount_setattr(2) blocks this. This causes regressions (See
the commit for details).
Fix this by relaxing the check. If the mount has a parent or if it
isn't a detached mount, verify that the mount namespaces of the
caller and the mount are the same. Technically, we could probably
write this even simpler and check that the mount namespaces match if
it isn't a detached mount. But the slightly longer check makes it
clearer what conditions one needs to think about.
* tag 'vfs-6.8-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: relax mount_setattr() permission checks
remap_range: merge do_clone_file_range() into vfs_clone_file_range()
|
|
...and eliminate the stub version when CONFIG_FILE_LOCKING is disabled.
This silences the following warning that crept in recently:
fs/ceph/locks.c: In function 'ceph_count_locks':
fs/ceph/locks.c:380:27: error: unused variable 'lock' [-Werror=unused-variable]
380 | struct file_lock *lock;
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402062210.3YyBVGF1-lkp@intel.com/
Fixes: 75cabec0111b ("filelock: add some new helper functions")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240212-flsplit3-v1-1-019f0ad6bf69@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new ioctl for getting the sysfs name of a filesystem - the path
under /sys/fs.
This is going to let us standardize exporting data from sysfs across
filesystems, e.g. time stats.
The returned path will always be of the form "$FSTYP/$SYSFS_IDENTIFIER",
where the sysfs identifier may be a UUID (for bcachefs) or a device name
(xfs).
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-6-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that mode is in struct coresight_device, sets can be wrapped. This
also allows us to add a sanity check that there have been no concurrent
modifications of mode. Currently all usages of local_set() were inside
the device's spin locks so this new warning shouldn't be triggered.
coresight_take_mode() could maybe have been used in place of adding
the warning, but there may be use cases which set the mode to the same
mode which are valid but would fail in coresight_take_mode() because
it requires the device to only be in the disabled state.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-13-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that mode is in struct coresight_device accesses can be wrapped.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-12-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that mode is in struct coresight_device, this pattern can be wrapped
in a helper.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-11-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
These are a bit annoying to keep up to date when the function signatures
change. But if CONFIG_CORESIGHT isn't enabled, then they're not used
anyway so just delete them.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-9-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Refcnt is only ever accessed from either inside the coresight_mutex, or
the device's spinlock, making the atomic type and atomic_dec_return()
calls confusing and unnecessary. The only point of synchronisation
outside of these two types of locks is already done with a compare and
swap on 'mode', which a comment has been added for.
There was one instance of refcnt being used outside of a lock in TPIU,
but that can easily be fixed by making it the same as all the other
devices and adding a spinlock. Potentially in the future all the
refcounting and locking can be moved up into the core code, and all the
mostly duplicate code from the individual devices can be removed.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-8-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
At the moment the core file contains both sysfs functionality and
core functionality, while the Perf mode is in a separate file in
coresight-etm-perf.c
Many of the functions have ambiguous names like
coresight_enable_source() which actually only work in relation to the
sysfs mode. To avoid further confusion, move everything that isn't core
functionality into the sysfs file and append _sysfs to the ambiguous
functions.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-7-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
'enable', which probably should have been 'enabled', is only ever read
in the core code in relation to controlling sources, and specifically
only sources in sysfs mode. Confusingly it's not labelled as such and
relying on it can be a source of bugs like the one fixed by
commit 078dbba3f0c9 ("coresight: Fix crash when Perf and sysfs modes are
used concurrently").
Most importantly, it can only be used when the coresight_mutex is held
which is only done when enabling and disabling paths in sysfs mode, and
not Perf mode. So to prevent its usage spreading and leaking out to
other devices, remove it.
It's use is equivalent to checking if the mode is currently sysfs, as
due to the coresight_mutex lock, mode == CS_MODE_SYSFS can only become
true or untrue when that lock is held, and when mode == CS_MODE_SYSFS
the device is both enabled and in sysfs mode.
The one place it was used outside of the core code is in TPDA, but that
pattern is more appropriately represented using refcounts inside the
device's own spinlock.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-6-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Most devices use mode, so move the mode definition out of the individual
devices and up to the Coresight device. This will allow the core code to
also know the mode which will be useful in a later commit.
This also fixes the inconsistency of the documentation of the mode field
on the individual device types. For example ETB10 had "this ETB is being
used".
Two devices didn't require an atomic mode type, so these usages have
been converted to atomic_get() and atomic_set() only to make it compile,
but the documentation of the field in struct coresight_device explains
this type of usage.
In the future, manipulation of the mode could be completely moved out of
the individual devices and into the core code because it's almost all
duplicate code, and this change is a step towards that.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-5-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Activated has the specific meaning of a sink that's selected for use by
the user via sysfs. But comments in some code that's shared by Perf use
the same word, so in those cases change them to just say "selected"
instead. With selected implying either via Perf or "activated" via
sysfs.
coresight_get_enabled_sink() doesn't actually get an enabled sink, it
only gets an activated one, so change that too.
And change the activated variable name to include "sysfs" so it can't
be confused as a general status.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-3-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the coresight_bustype variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/2024010531-tinfoil-avert-4a57@gregkh
|
|
dev->lstats is notably used from loopback ndo_start_xmit()
and other virtual drivers.
Per cpu stats updates are dirtying per-cpu data,
but the pointer itself is read-only.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tp->tcp_usec_ts is a read mostly field, used in rx and tx fast paths.
Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tp->scaling_ratio is a read mostly field, used in rx and tx fast paths.
Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The match function used in gpio_device_find() should not modify the
contents of passed opaque pointer, because such modification would not
be necessary for actual matching and it could lead to quite unreadable,
spaghetti code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bartosz: fix coding style in header]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Linux 6.8-rc4
Pulling this for a bugfix upstream with which the gpio/for-next branch
conflicts.
|
|
In various performance profiles of kernels with BPF programs attached,
bpf_local_storage_lookup() appears as a significant portion of CPU
cycles spent. To enable the compiler generate more optimal code, turn
bpf_local_storage_lookup() into a static inline function, where only the
cache insertion code path is outlined
Notably, outlining cache insertion helps avoid bloating callers by
duplicating setting up calls to raw_spin_{lock,unlock}_irqsave() (on
architectures which do not inline spin_lock/unlock, such as x86), which
would cause the compiler produce worse code by deciding to outline
otherwise inlinable functions. The call overhead is neutral, because we
make 2 calls either way: either calling raw_spin_lock_irqsave() and
raw_spin_unlock_irqsave(); or call __bpf_local_storage_insert_cache(),
which calls raw_spin_lock_irqsave(), followed by a tail-call to
raw_spin_unlock_irqsave() where the compiler can perform TCO and (in
optimized uninstrumented builds) turns it into a plain jump. The call to
__bpf_local_storage_insert_cache() can be elided entirely if
cacheit_lockit is a false constant expression.
Based on results from './benchs/run_bench_local_storage.sh' (21 trials,
reboot between each trial; x86 defconfig + BPF, clang 16) this produces
improvements in throughput and latency in the majority of cases, with an
average (geomean) improvement of 8%:
+---- Hashmap Control --------------------
|
| + num keys: 10
| : <before> | <after>
| +-+ hashmap (control) sequential get +----------------------+----------------------
| +- hits throughput | 14.789 M ops/s | 14.745 M ops/s ( ~ )
| +- hits latency | 67.679 ns/op | 67.879 ns/op ( ~ )
| +- important_hits throughput | 14.789 M ops/s | 14.745 M ops/s ( ~ )
|
| + num keys: 1000
| : <before> | <after>
| +-+ hashmap (control) sequential get +----------------------+----------------------
| +- hits throughput | 12.233 M ops/s | 12.170 M ops/s ( ~ )
| +- hits latency | 81.754 ns/op | 82.185 ns/op ( ~ )
| +- important_hits throughput | 12.233 M ops/s | 12.170 M ops/s ( ~ )
|
| + num keys: 10000
| : <before> | <after>
| +-+ hashmap (control) sequential get +----------------------+----------------------
| +- hits throughput | 7.220 M ops/s | 7.204 M ops/s ( ~ )
| +- hits latency | 138.522 ns/op | 138.842 ns/op ( ~ )
| +- important_hits throughput | 7.220 M ops/s | 7.204 M ops/s ( ~ )
|
| + num keys: 100000
| : <before> | <after>
| +-+ hashmap (control) sequential get +----------------------+----------------------
| +- hits throughput | 5.061 M ops/s | 5.165 M ops/s (+2.1%)
| +- hits latency | 198.483 ns/op | 194.270 ns/op (-2.1%)
| +- important_hits throughput | 5.061 M ops/s | 5.165 M ops/s (+2.1%)
|
| + num keys: 4194304
| : <before> | <after>
| +-+ hashmap (control) sequential get +----------------------+----------------------
| +- hits throughput | 2.864 M ops/s | 2.882 M ops/s ( ~ )
| +- hits latency | 365.220 ns/op | 361.418 ns/op (-1.0%)
| +- important_hits throughput | 2.864 M ops/s | 2.882 M ops/s ( ~ )
|
+---- Local Storage ----------------------
|
| + num_maps: 1
| : <before> | <after>
| +-+ local_storage cache sequential get +----------------------+----------------------
| +- hits throughput | 33.005 M ops/s | 39.068 M ops/s (+18.4%)
| +- hits latency | 30.300 ns/op | 25.598 ns/op (-15.5%)
| +- important_hits throughput | 33.005 M ops/s | 39.068 M ops/s (+18.4%)
| :
| : <before> | <after>
| +-+ local_storage cache interleaved get +----------------------+----------------------
| +- hits throughput | 37.151 M ops/s | 44.926 M ops/s (+20.9%)
| +- hits latency | 26.919 ns/op | 22.259 ns/op (-17.3%)
| +- important_hits throughput | 37.151 M ops/s | 44.926 M ops/s (+20.9%)
|
| + num_maps: 10
| : <before> | <after>
| +-+ local_storage cache sequential get +----------------------+----------------------
| +- hits throughput | 32.288 M ops/s | 38.099 M ops/s (+18.0%)
| +- hits latency | 30.972 ns/op | 26.248 ns/op (-15.3%)
| +- important_hits throughput | 3.229 M ops/s | 3.810 M ops/s (+18.0%)
| :
| : <before> | <after>
| +-+ local_storage cache interleaved get +----------------------+----------------------
| +- hits throughput | 34.473 M ops/s | 41.145 M ops/s (+19.4%)
| +- hits latency | 29.010 ns/op | 24.307 ns/op (-16.2%)
| +- important_hits throughput | 12.312 M ops/s | 14.695 M ops/s (+19.4%)
|
| + num_maps: 16
| : <before> | <after>
| +-+ local_storage cache sequential get +----------------------+----------------------
| +- hits throughput | 32.524 M ops/s | 38.341 M ops/s (+17.9%)
| +- hits latency | 30.748 ns/op | 26.083 ns/op (-15.2%)
| +- important_hits throughput | 2.033 M ops/s | 2.396 M ops/s (+17.9%)
| :
| : <before> | <after>
| +-+ local_storage cache interleaved get +----------------------+----------------------
| +- hits throughput | 34.575 M ops/s | 41.338 M ops/s (+19.6%)
| +- hits latency | 28.925 ns/op | 24.193 ns/op (-16.4%)
| +- important_hits throughput | 11.001 M ops/s | 13.153 M ops/s (+19.6%)
|
| + num_maps: 17
| : <before> | <after>
| +-+ local_storage cache sequential get +----------------------+----------------------
| +- hits throughput | 28.861 M ops/s | 32.756 M ops/s (+13.5%)
| +- hits latency | 34.649 ns/op | 30.530 ns/op (-11.9%)
| +- important_hits throughput | 1.700 M ops/s | 1.929 M ops/s (+13.5%)
| :
| : <before> | <after>
| +-+ local_storage cache interleaved get +----------------------+----------------------
| +- hits throughput | 31.529 M ops/s | 36.110 M ops/s (+14.5%)
| +- hits latency | 31.719 ns/op | 27.697 ns/op (-12.7%)
| +- important_hits throughput | 9.598 M ops/s | 10.993 M ops/s (+14.5%)
|
| + num_maps: 24
| : <before> | <after>
| +-+ local_storage cache sequential get +----------------------+----------------------
| +- hits throughput | 18.602 M ops/s | 19.937 M ops/s (+7.2%)
| +- hits latency | 53.767 ns/op | 50.166 ns/op (-6.7%)
| +- important_hits throughput | 0.776 M ops/s | 0.831 M ops/s (+7.2%)
| :
| : <before> | <after>
| +-+ local_storage cache interleaved get +----------------------+----------------------
| +- hits throughput | 21.718 M ops/s | 23.332 M ops/s (+7.4%)
| +- hits latency | 46.047 ns/op | 42.865 ns/op (-6.9%)
| +- important_hits throughput | 6.110 M ops/s | 6.564 M ops/s (+7.4%)
|
| + num_maps: 32
| : <before> | <after>
| +-+ local_storage cache sequential get +----------------------+----------------------
| +- hits throughput | 14.118 M ops/s | 14.626 M ops/s (+3.6%)
| +- hits latency | 70.856 ns/op | 68.381 ns/op (-3.5%)
| +- important_hits throughput | 0.442 M ops/s | 0.458 M ops/s (+3.6%)
| :
| : <before> | <after>
| +-+ local_storage cache interleaved get +----------------------+----------------------
| +- hits throughput | 17.111 M ops/s | 17.906 M ops/s (+4.6%)
| +- hits latency | 58.451 ns/op | 55.865 ns/op (-4.4%)
| +- important_hits throughput | 4.776 M ops/s | 4.998 M ops/s (+4.6%)
|
| + num_maps: 100
| : <before> | <after>
| +-+ local_storage cache sequential get +----------------------+----------------------
| +- hits throughput | 5.281 M ops/s | 5.528 M ops/s (+4.7%)
| +- hits latency | 192.398 ns/op | 183.059 ns/op (-4.9%)
| +- important_hits throughput | 0.053 M ops/s | 0.055 M ops/s (+4.9%)
| :
| : <before> | <after>
| +-+ local_storage cache interleaved get +----------------------+----------------------
| +- hits throughput | 6.265 M ops/s | 6.498 M ops/s (+3.7%)
| +- hits latency | 161.436 ns/op | 152.877 ns/op (-5.3%)
| +- important_hits throughput | 1.636 M ops/s | 1.697 M ops/s (+3.7%)
|
| + num_maps: 1000
| : <before> | <after>
| +-+ local_storage cache sequential get +----------------------+----------------------
| +- hits throughput | 0.355 M ops/s | 0.354 M ops/s ( ~ )
| +- hits latency | 2826.538 ns/op | 2827.139 ns/op ( ~ )
| +- important_hits throughput | 0.000 M ops/s | 0.000 M ops/s ( ~ )
| :
| : <before> | <after>
| +-+ local_storage cache interleaved get +----------------------+----------------------
| +- hits throughput | 0.404 M ops/s | 0.403 M ops/s ( ~ )
| +- hits latency | 2481.190 ns/op | 2487.555 ns/op ( ~ )
| +- important_hits throughput | 0.102 M ops/s | 0.101 M ops/s ( ~ )
The on_lookup test in {cgrp,task}_ls_recursion.c is removed
because the bpf_local_storage_lookup is no longer traceable
and adding tracepoint will make the compiler generate worse
code: https://lore.kernel.org/bpf/ZcJmok64Xqv6l4ZS@elver.google.com/
Signed-off-by: Marco Elver <elver@google.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240207122626.3508658-1-elver@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Sometimes a voltage channel might have an hard failure (eg: a shorted
MOSFET). Hence, add a fault attribute to report such failures.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240129-b4-ltc4282-support-v4-2-fe75798164cc@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
HWMON_CHANNEL_INFO() is supposed to be used as initializer for arrays of
const struct hwmon_channel_info *. However, without explicit const,
HWMON_CHANNEL_INFO() creates mutable compound literals, and the const
pointers point at the mutable data. Add const to place the data in
rodata.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240117114405.1506775-1-jani.nikula@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Make sure a warning is issued when a hrtimer gets queued after the
timers have been migrated on the CPU down path and thus said timer
will get ignored
* tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Report offline hrtimer enqueue
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Update a potentially stale firmware attribute (Maurizio)
- Fixes for the recent verbose error logging (Keith, Chaitanya)
- Protection information payload size fix for passthrough (Francis)
- Fix for a queue freezing issue in virtblk (Yi)
- blk-iocost underflow fix (Tejun)
- blk-wbt task detection fix (Jan)
* tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linux:
virtio-blk: Ensure no requests in virtqueues before deleting vqs.
blk-iocost: Fix an UBSAN shift-out-of-bounds warning
nvme: use ns->head->pi_size instead of t10_pi_tuple structure size
nvme-core: fix comment to reflect right functions
nvme: move passthrough logging attribute to head
blk-wbt: Fix detection of dirty-throttled tasks
nvme-host: fix the updating of the firmware version
|
|
Some PHY driver might require additional regs call after
genphy_c37_read_status() is called.
Expand genphy_c37_read_status to provide a bool wheather the link has
changed or not to permit PHY driver to skip additional regs call if
nothing has changed.
Every user of genphy_c37_read_status() is updated with the new
additional bool.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devm/of_phy_package_join helper to join PHYs in a PHY package. These
are variant of the manual phy_package_join with the difference that
these will use DT nodes to derive the base_addr instead of manually
passing an hardcoded value.
An additional value is added in phy_package_shared, "np" to reference
the PHY package node pointer in specific PHY driver probe_once and
config_init_once functions to make use of additional specific properties
defined in the PHY package node in DT.
The np value is filled only with of_phy_package_join if a valid PHY
package node is found. A valid PHY package node must have the node name
set to "ethernet-phy-package".
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 57851607326a2beef21e67f83f4f53a90df8445a.
Unfortunately, while we only call that thing once, the callback
*can* be called more than once for the same dentry - all it
takes is rename_lock being touched while we are in d_walk().
For now let's revert it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull ceph fixes from Ilya Dryomov:
"Some fscrypt-related fixups (sparse reads are used only for encrypted
files) and two cap handling fixes from Xiubo and Rishabh"
* tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client:
ceph: always check dir caps asynchronously
ceph: prevent use-after-free in encode_cap_msg()
ceph: always set initial i_blkbits to CEPH_FSCRYPT_BLOCK_SHIFT
libceph: just wait for more data to be available on the socket
libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*()
libceph: fail sparse-read if the data length doesn't match
|
|
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f53 ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Async can schedule a number of interdependent work items. However, since
5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for
unbound workqueues"), unbound workqueues have separate min_active which sets
the number of interdependent work items that can be handled. This default
value is 8 which isn't sufficient for async and can lead to stalls during
resume from suspend in some cases.
Let's use a dedicated unbound workqueue with raised min_active.
Link: http://lkml.kernel.org/r/708a65cc-79ec-44a6-8454-a93d0f3114c3@samsung.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement
for unbound workqueues"), unbound workqueues have separate min_active which
sets the number of interdependent work items that can be handled. This value
is currently initialized to WQ_DFL_MIN_ACTIVE which is 8. This isn't high
enough for some users, let's add an interface to adjust the setting.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
