| Age | Commit message (Collapse) | Author |
|---|
|
The `#ifdef` for acpi_register_lps0_dev() currently is guarded against
`CONFIG_X86`, but actually the functions contained in the block are
specifically sleep related functions.
Adjust the guard to also check for `CONFIG_SUSPEND`.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Recent rework moved block device closing out of sb->put_super() and into
sb->kill_sb() to avoid deadlocks as s_umount is held in put_super() and
blkdev_put() can end up taking s_umount again.
That means we need to move the removal of the superblock from @fs_supers
out of generic_shutdown_super() and into deactivate_locked_super() to
ensure that concurrent mounters don't fail to open block devices that
are still in use because blkdev_put() in sb->kill_sb() hasn't been
called yet.
We can now do this as we can make iterators through @fs_super and
@super_blocks wait without holding s_umount. Concurrent mounts will wait
until a dying superblock is fully dead so until sb->kill_sb() has been
called and SB_DEAD been set. Concurrent iterators can already discard
any SB_DYING superblock.
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-4-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Recent patches experiment with making it possible to allocate a new
superblock before opening the relevant block device. Naturally this has
intricate side-effects that we get to learn about while developing this.
Superblock allocators such as sget{_fc}() return with s_umount of the
new superblock held and lock ordering currently requires that block
level locks such as bdev_lock and open_mutex rank above s_umount.
Before aca740cecbe5 ("fs: open block device after superblock creation")
ordering was guaranteed to be correct as block devices were opened prior
to superblock allocation and thus s_umount wasn't held. But now s_umount
must be dropped before opening block devices to avoid locking
violations.
This has consequences. The main one being that iterators over
@super_blocks and @fs_supers that grab a temporary reference to the
superblock can now also grab s_umount before the caller has managed to
open block devices and called fill_super(). So whereas before such
iterators or concurrent mounts would have simply slept on s_umount until
SB_BORN was set or the superblock was discard due to initalization
failure they can now needlessly spin through sget{_fc}().
If the caller is sleeping on bdev_lock or open_mutex one caller waiting
on SB_BORN will always spin somewhere and potentially this can go on for
quite a while.
It should be possible to drop s_umount while allowing iterators to wait
on a nascent superblock to either be born or discarded. This patch
implements a wait_var_event() mechanism allowing iterators to sleep
until they are woken when the superblock is born or discarded.
This also allows us to avoid relooping through @fs_supers and
@super_blocks if a superblock isn't yet born or dying.
Link: aca740cecbe5 ("fs: open block device after superblock creation")
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current code that marshalls the EFI runtime call arguments to hand
them off to a async helper does so in a type unsafe and slightly messy
manner - everything is cast to void* except for some integral types that
are passed by reference and dereferenced on the receiver end.
Let's clean this up a bit, and record the arguments of each runtime
service invocation exactly as they are issued, in a manner that permits
the compiler to check the types of the arguments at both ends.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
_DEFINE_DEV_PM_OPS() helps to define PM operations for the system sleep
and/or runtime PM cases. Some of the existing users want to have _noirq()
variants to be set. For that purpose introduce a new helper which sets
up _noirq() callbacks to be assigned and struct dev_pm_ops be provided.
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230717172821.62827-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
aio, io_uring, cachefiles and overlayfs, all open code an ugly variant
of file_{start,end}_write() to silence lockdep warnings.
Create helpers for this lockdep dance so we can use the helpers in all
the callers.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-4-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
and use sb_end_write() instead of open coded version.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-3-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Change legacy name master/slave to modern name host/target.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230818093154.1183529-20-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change legacy name master/slave to modern name host/target or controller.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230818093154.1183529-8-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fold folio_account_redirty into folio_redirty_for_writepage now
that all other users except for the also unused account_page_redirty
wrapper are gone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
get_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-17-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
BLKFLSBUF is a historic ioctl that is called on a file handle to a
block device and syncs either the file system mounted on that block
device if there is one, or otherwise the just the data on the block
device.
Replace the get_super based syncing with a holder operation to remove
the last usage of get_super, and to also support syncing the file system
if the block device is not the main block device stored in s_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-16-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Combine the newly merged bdev_mark_dead helper with the existing
mark_dead holder operation so that all operations that invalidate
a device that is dead or being removed now go through the holder
ops. This allows file systems to explicitly shutdown either ASAP
(for a surprise removal) or after writing back data (for an orderly
removal), and do so not only for the main device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-15-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We currently have two interfaces that take a block_devices and the find
a mounted file systems to flush or invaldidate data on it. Both are a
bit problematic because they only work for the "main" block devices
that is used as s_dev for the super_block, and because they don't call
into the file system at all.
Merge the two into a new bdev_mark_dead helper that does both the
syncing and invalidation and which is properly documented. This is
in preparation of merging the functionality into the ->mark_dead
holder operation so that it will work on additional block devices
used by a file systems and give us a single entry point for invalidation
of dead devices or media.
Note that a single standalone fsync_bdev call for an obscure ioctl
remains for now, but that one will also be deal with in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Hard code the events to DISK_EVENT_MEDIA_CHANGE as that is the only
useful use case, and drop the superfluous return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'arm/smmu', 'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Setting IP_RECVERR and IPV6_RECVERR options to zero currently
purges the socket error queue, which was probably not expected
for zerocopy and tx_timestamp users.
I discovered this issue while preparing commit 6b5f43ea0815
("inet: move inet->recverr to inet->inet_flags"), I presume this
change does not need to be backported to stable kernels.
Add skb_errqueue_purge() helper to purge error messages only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next
We need the serial-core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add RoCE MACsec rules when a gid is added for the MACsec netdevice and
handle their cleanup when the gid is removed or the MACsec SA is deleted.
Also support alias IP for the MACsec device, as long as we don't have
more ips than what the gid table can hold.
In addition handle the case where a gid is added but there are still no
SAs added for the MACsec device, so the rules are added later on when
the SAs are added.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Adds all the core steering helper functions that are needed in order
to setup RoCE steering rules which includes both the RX and TX rules
addition and deletion.
As well as exporting the function to be ready to use from the IB driver
where we expose functions to allow deletion of all rules, which is
needed when a GID is deleted, or a deletion of a specific rule when an SA
is deleted, and a similar manner for the rules addition.
These functions are used in a later patch by IB driver to trigger the
rules addition/deletion when needed.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Add MACsec flow steering priorities in RDMA namespaces. This allows
adding tables/rules to forward RoCEv2 traffic to the MACsec crypto
tables in NIC_TX domain, and accept RoCEv2 traffic from NIC_RX domain.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Handle MACsec IP ambiguity issue, since mlx5 hw can't support
programming both the MACsec and the physical gid when they have the same
IP address, because it wouldn't know to whom to steer the traffic.
Hence in such case we delete the physical gid from the hw gid table,
which would then cause all traffic sent over it to fail, and we'll only
be able to send traffic over the MACsec gid.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
to core
Since now MACsec flow steering (macsec_fs) and MACsec statistics (stats)
are maintained by the core driver, move their data as well to be saved
inside core structures instead of staying part of ethernet MACsec database.
In addition cleanup all MACsec stats functions from the ethernet MACsec
code and move what's needed to be part of macsec_fs instead.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
|
|
skb_queue_purge() and __skb_queue_purge() become wrappers
around the new generic functions.
New SKB_DROP_REASON_QUEUE_PURGE drop reason is added,
but users can start adding more specific reasons.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
virtchnl: fix fake 1-elem arrays
Alexander Lobakin says:
6.5-rc1 started spitting warning splats when composing virtchnl
messages, precisely on virtchnl_rss_key and virtchnl_lut:
[ 84.167709] memcpy: detected field-spanning write (size 52) of single
field "vrk->key" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1095
(size 1)
[ 84.169915] WARNING: CPU: 3 PID: 11 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1095 iavf_set_rss_key+0x123/0x140 [iavf]
...
[ 84.191982] Call Trace:
[ 84.192439] <TASK>
[ 84.192900] ? __warn+0xc9/0x1a0
[ 84.193353] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.193818] ? report_bug+0x12c/0x1b0
[ 84.194266] ? handle_bug+0x42/0x70
[ 84.194714] ? exc_invalid_op+0x1a/0x50
[ 84.195149] ? asm_exc_invalid_op+0x1a/0x20
[ 84.195592] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.196033] iavf_watchdog_task+0xb0c/0xe00 [iavf]
...
[ 84.225476] memcpy: detected field-spanning write (size 64) of single
field "vrl->lut" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1127
(size 1)
[ 84.227190] WARNING: CPU: 27 PID: 1044 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1127 iavf_set_rss_lut+0x123/0x140 [iavf]
...
[ 84.246601] Call Trace:
[ 84.247228] <TASK>
[ 84.247840] ? __warn+0xc9/0x1a0
[ 84.248263] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.248698] ? report_bug+0x12c/0x1b0
[ 84.249122] ? handle_bug+0x42/0x70
[ 84.249549] ? exc_invalid_op+0x1a/0x50
[ 84.249970] ? asm_exc_invalid_op+0x1a/0x20
[ 84.250390] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.250820] iavf_watchdog_task+0xb16/0xe00 [iavf]
Gustavo already tried to fix those back in 2021[0][1]. Unfortunately,
a VM can run a different kernel than the host, meaning that those
structures are sorta ABI.
However, it is possible to have proper flex arrays + struct_size()
calculations and still send the very same messages with the same sizes.
The common rule is:
elem[1] -> elem[]
size = struct_size() + <difference between the old and the new msg size>
The "old" size in the current code is calculated 3 different ways for
10 virtchnl structures total. Each commit addresses one of the ways
cumulatively instead of per-structure.
I was planning to send it to -net initially, but given that virtchnl was
renamed from i40evf and got some fat style cleanup commits in the past,
it's not very straightforward to even pick appropriate SHAs, not
speaking of automatic portability. I may send manual backports for
a couple of the latest supported kernels later on if anyone needs it
at all.
[0] https://lore.kernel.org/all/20210525230912.GA175802@embeddedor
[1] https://lore.kernel.org/all/20210525231851.GA176647@embeddedor
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: fix fake 1-elem arrays for structures allocated as `nents`
virtchnl: fix fake 1-elem arrays in structures allocated as `nents + 1`
virtchnl: fix fake 1-elem arrays in structs allocated as `nents + 1` - 1
====================
Link: https://lore.kernel.org/r/20230816210657.1326772-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC.
|
|
Some configurations differ between chip variants, e,g. the register
to control the on of state of LDOA1 and SWB2. Thus, it is necessary
to choose the correct configuration for a dedicated device.
If the wrong configuration was used, the LDOA1 output that was
disabled by the bootloader was enabled in Kernel again.
Each chip variant gets its dedicated configuration selected by
the chip ID previously collected from MFD probe function.
The VTT enum value (tps65086_regulators) is shifted because not all
chip variants have a separate SWB2 switch. Sometimes they are merged.
So the configuration possibilities differ, thus the regulator
configuration arrays have a different length.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230818083721.29790-5-andre.werner@systec-electronic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge Lee Jones' tag 'ib-mfd-regulator-v6.6' of
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
into 20230818204514.GA1380343@google.com so we can build the tps65086
support:
Immutable branch between MFD and Regulator due for the v6.6 merge window
|
|
commit 260a127bfbeb ("mfd: 88pm860x-i2c: Purge unused functions")
left behind this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230728132841.10648-1-yuehaibing@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
commit d28f1db8187d ("mfd: Remove confusing ab8500-i2c file and merge into ab8500-core")
left behind this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230728132439.31568-1-yuehaibing@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
max77686_irq_init() and max77686_irq_exit() are not used since
commit 6f1c1e71d933 ("mfd: max77686: Convert to use regmap_irq").
And max77686_irq_resume() never be implemented since introduced in
commit dae8a969d512 ("mfd: Add Maxim 77686 driver").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230728132709.27052-1-yuehaibing@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Fixes: 254d3a727421c ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be8907359df4 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e1687b ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since commit b0e846248de5 ("mfd: db8500-prcmu: Remove dead code for a non-existing config")
these inline helpers also no need any more.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230720143738.13996-1-yuehaibing@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-7-frank.li@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
ibs-for-mfd-merged
Immutable branch between MFD, Pinctrl and soundwire due for the v6.6 merge window
Immutable branch between MFD and Regulator due for the v6.6 merge window
|
|
This commit prepares a following commit for the regulator part of the MFD.
The driver should support different device chips that differ in their
register definitions, for instance to control LDOA1 and SWB2.
So it is necessary to use a dedicated regulator description for a
specific device variant. Thus, the content from DEVICEID Register 1 is
used to choose a dedicated configuration between the different device
variants.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230818083721.29790-2-andre.werner@systec-electronic.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e194997 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88ada ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The APIs that allow backtracing across CPUs have always had a way to
exclude the current CPU. This convenience means callers didn't need to
find a place to allocate a CPU mask just to handle the common case.
Let's extend the API to take a CPU ID to exclude instead of just a
boolean. This isn't any more complex for the API to handle and allows the
hardlockup detector to exclude a different CPU (the one it already did a
trace for) without needing to find space for a CPU mask.
Arguably, this new API also encourages safer behavior. Specifically if
the caller wants to avoid tracing the current CPU (maybe because they
already traced the current CPU) this makes it more obvious to the caller
that they need to make sure that the current CPU ID can't change.
[akpm@linux-foundation.org: fix trigger_allbutcpu_cpu_backtrace() stub]
Link: https://lkml.kernel.org/r/20230804065935.v4.1.Ia35521b91fc781368945161d7b28538f9996c182@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
range.h works with struct range data type. The resource_size_t
is an alien here.
(1) Move cap_resource() implementation into its only user, and
(2) rename and move RESOURCE_SIZE_MAX to limits.h.
Link: https://lkml.kernel.org/r/20230804064636.15368-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are no in-kernel users of __kthread_should_park() so mark it as
static and do not export it.
Link: https://lkml.kernel.org/r/2023080450-handcuff-stump-1d6e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: John Stultz <jstultz@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Zqiang <qiang1.zhang@intel.com>
Cc: Prathu Baronia <quic_pbaronia@quicinc.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
abs_diff() belongs to math.h. Move it there. This will allow others to
use it.
[andriy.shevchenko@linux.intel.com: add abs_diff() documentation]
Link: https://lkml.kernel.org/r/20230804050934.83223-1-andriy.shevchenko@linux.intel.com
[akpm@linux-foundation.org: fix comment, per Randy]
Link: https://lkml.kernel.org/r/20230803131918.53727-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org> # tty/serial
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # gpu/ipu-v3
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace custom implementation of the macros from args.h.
Link: https://lkml.kernel.org/r/20230718211147.18647-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace custom implementation of the macros from args.h.
Link: https://lkml.kernel.org/r/20230718211147.18647-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Gow <davidgow@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kernel.h: Split out a couple of macros to args.h", v4.
There are macros in kernel.h that can be used outside of that header.
Split them to args.h and replace open coded variants.
This patch (of 4):
kernel.h is being used as a dump for all kinds of stuff for a long time.
The COUNT_ARGS() and CONCATENATE() macros may be used in some places
without need of the full kernel.h dependency train with it.
Here is the attempt on cleaning it up by splitting out these macros().
While at it, include new header where it's being used.
Link: https://lkml.kernel.org/r/20230718211147.18647-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20230718211147.18647-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [PCI]
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Gow <davidgow@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Arm disabled hugetlb vmemmap optimization [1] because hugetlb vmemmap
optimization includes an update of both the permissions (writeable to
read-only) and the output address (pfn) of the vmemmap ptes. That is not
supported without unmapping of pte(marking it invalid) by some
architectures.
With DAX vmemmap optimization we don't require such pte updates and
architectures can enable DAX vmemmap optimization while having hugetlb
vmemmap optimization disabled. Hence split DAX optimization support into
a different config.
s390, loongarch and riscv don't have devdax support. So the DAX config is
not enabled for them. With this change, arm64 should be able to select
DAX optimization
[1] commit 060a2c92d1b6 ("arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP")
Link: https://lkml.kernel.org/r/20230724190759.483013-8-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_TRANSPARENT_HUGEPAGE
pudp_set_wrprotect and move_huge_pud helpers are only used when
CONFIG_TRANSPARENT_HUGEPAGE is enabled. Similar to pmdp_set_wrprotect and
move_huge_pmd_helpers use architecture override only if
CONFIG_TRANSPARENT_HUGEPAGE is set
Link: https://lkml.kernel.org/r/20230724190759.483013-7-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This helps architectures to override pmd_same and pud_same independently.
Link: https://lkml.kernel.org/r/20230724190759.483013-6-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
dax vmemmap optimization requires a minimum of 2 PAGE_SIZE area within
vmemmap such that tail page mapping can point to the second PAGE_SIZE
area. Enforce that in vmemmap_can_optimize() function.
Architectures like powerpc also want to enable vmemmap optimization
conditionally (only with radix MMU translation). Hence allow architecture
override.
Link: https://lkml.kernel.org/r/20230724190759.483013-4-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We will use this in a later patch to do tlb flush when clearing pud
entries on powerpc. This is similar to commit 93a98695f2f9 ("mm: change
pmdp_huge_get_and_clear_full take vm_area_struct as arg")
Link: https://lkml.kernel.org/r/20230724190759.483013-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
