summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2019-03-08Merge tag 'for-5.1/libata-20190301' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata updates from Jens Axboe: "Pretty quiet round: a few small fixes, comment typo, and most notably a low level driver for the PATA Buddha controller" * tag 'for-5.1/libata-20190301' of git://git.kernel.dk/linux-block: ata: libahci: Only warn for AHCI_HFLAG_MULTI_MSI set when genuine custom irq handler implemented libata: fix a typo in comment ata: macio: Use of_node_name_eq for node name comparisons ata: pata_samsung_cf: simplify getting .driver_data ata: pata_platform: Add IRQF_SHARED to IRQ flags ata: pata_of_platform: Allow to use 16-bit wide data transfer ata: add Buddha PATA controller driver
2019-03-08bpf: fix warning about using plain integer as NULLBo YU
Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=net/bpf/ CHECK net/bpf//test_run.c net/bpf//test_run.c:19:77: warning: Using plain integer as NULL pointer ./include/linux/bpf-cgroup.h:295:77: warning: Using plain integer as NULL pointer Fixes: 8bad74f9840f ("bpf: extend cgroup bpf core to allow multiple cgroup storage types") Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-08Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and ↵Stephen Boyd
'clk-SA-fixes' into clk-next - Updates for qcom MSM8998 GCC clks - qcom MSM8998 RPM managed clks - Random static analysis fixes for clk drivers * clk-qcom-msm8998: clk: qcom: Make common clk_hw registrations clk: qcom: smd: Add support for MSM8998 rpm clocks clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998 clk: qcom: Add missing freq for usb30_master_clk on 8998 clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks * clk-fractional-parent: clk: fractional-divider: check parent rate only if flag is set * clk-x86-mv: clk: x86: Move clk-lpss.h to platform_data/x86 * clk-SA-fixes: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings clk: qoriq: Improve an error message
2019-03-08Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and ↵Stephen Boyd
'clk-mmp2-lcdc' into clk-next - Split LCDC into two clks on the Marvell MMP2 SoC * clk-imx: clk: imx8mq: add GPIO clocks to clock tree clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: imx: imx8mm: Mark init function __init clk: imx8mq: Add the missing ARM clock dt-bindings: imx8mq-clock: Add the missing ARM clock clk: imx: imx8mq: Fix the rate propagation for arm pll clk: imx8mq: Add support for the CLKO1 clock clk: imx8mq: Fix the CLKO2 source select list clk: imx8mq: Add missing M4 clocks clk: imx: Add clock driver support for imx8mm dt-bindings: imx: Add clock binding doc for imx8mm clk: imx: Add PLLs driver for imx8mm soc clk: imx5: add imx5_SCC2_IPG_GATE clk: imx: scu: add set parent support clk: imx: scu: add fallback compatible string support clk: imx8mq: Make parent names arrays const pointers clk: imx: Make parents const pointer in mux wrappers clk: imx: Make parent_names const pointer in composite-8m * clk-samsung: clk: samsung: s3c2443: Mark expected switch fall-through clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure clk: samsung: exynos5433: Add selected IMEM clocks clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU clk: samsung: exynos5433: Fix name typo in sssx clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs * clk-ti: clk: clk-twl6040: Fix imprecise external abort for pdmclk ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that clk: ti: check clock type before doing autoidle ops clk: ti: add a usecount for autoidle clk: ti: generalize the init sequence of clk_hw_omap clocks clk: ti: remove usage of CLK_IS_BASIC clk: ti: add new API for checking if a provided clock is an OMAP clock clk: ti: move clk_hw_omap list handling under generic part of the driver * clk-uniphier-gear: clk: uniphier: Fix update register for CPU-gear * clk-mmp2-lcdc: clk: mmp2: separate LCDC peripheral clk form the display clock dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
2019-03-08Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', ↵Stephen Boyd
'clk-meson' and 'clk-renesas' into clk-next - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups * clk-optional: clk: Add (devm_)clk_get_optional() functions clk: Add comment about __of_clk_get_by_name() error values * clk-devm-clkdev-register: clk: clk-st: avoid clkdev lookup leak at remove clk: clk-max77686: Clean clkdev lookup leak and use devm clkdev: add managed clkdev lookup registration * clk-allwinner: clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it * clk-meson: (22 commits) clk: meson: meson8b: fix the naming of the APB clocks dt-bindings: clock: meson8b: add APB clock definition clk: meson: Add G12A AO Clock + Reset Controller dt-bindings: clk: add G12A AO Clock and Reset Bindings clk: meson: factorise meson64 peripheral clock controller drivers clk: meson: g12a: add peripheral clock controller dt-bindings: clk: meson: add g12a periph clock controller bindings clk: meson: pll: update driver for the g12a clk: meson: rework and clean drivers dependencies clk: meson: axg-audio does not require syscon clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory clk: export some clk_hw function symbols for module drivers clk: meson: ao-clkc: claim clock controller input clocks from DT clk: meson: axg: claim clock controller input clock from DT clk: meson: gxbb: claim clock controller input clock from DT clk: meson: meson8b: add the GPU clock tree clk: meson: meson8b: use a separate clock table for Meson8 clk: meson: axg-ao: add 32k generation subtree clk: meson: gxbb-ao: replace cec-32k with the dual divider clk: meson: add dual divider clock driver ... * clk-renesas: clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Add TMU clock clk: renesas: r8a77980: Add RPC clocks clk: renesas: rcar-gen3: Add RPC clocks clk: renesas: rcar-gen3: Add spinlock clk: renesas: rcar-gen3: Factor out cpg_reg_modify() clk: renesas: r8a774c0: Correct parent clock of DU clk: renesas: r8a774a1: Add missing CANFD clock clk: renesas: r8a774c0: Add missing CANFD clock
2019-03-08Merge tag 'gpio-v5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
2019-03-08Merge tag 'mfd-next-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add STMPE ADC Input driver - Add STMicroelectronics STPMIC1 Parent driver - Add STMicroelectronics STPMIC1 OnKey Misc driver - Add STMicroelectronics STPMIC1 Watchdog driver - Add Cirrus Logic Lochnagar Parent driver - Add TQ-Systems TQMX86 Parent driver New Device Support: - Add support for ADC to STMPE New (or moved) Functionality: - Move Lightbar functionality to its own driver; cros_ec_lightbar - Move VBC functionality to its own driver; cros_ec_vbc - Move VBC functionality to its own driver; cros_ec_vbc - Move DebugFS functionality to its own driver; cros_ec_debugfs - Move SYSFS functionality to its own driver; cros_ec_sysfs - Add support for input voltage options; tps65218 Fixes: - Use devm_* managed resources; cros_ec - Device Tree documentation; stmpe, aspeed-lpc, lochnagar - Trivial Clean-ups; stmpe - Rip out broken modular code; aat2870-core, adp5520, as3711, db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd, syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi, wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core - Kconfig fixups; INTEL_SOC_PMIC - Improve error path; sm501, sec-core - Use struct_size() helper; sm501 - Constify; at91-usart - Use pointers instead of copying data; at91-usart - Deliver proper return value; cros_ec_dev - Trivial formatting/whitespace; sec-core" * tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: mxs-lradc: Mark expected switch fall-through mfd: sec-core: Cleanup formatting to a consistent style mfd: tqmx86: IO controller with I2C, Wachdog and GPIO mfd: intel-lpss: Move linux/pm.h to the local header mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM mfd: tps68470: Drop unused MODULE_DEVICE_TABLE mfd: at91-usart: No need to copy mfd_cell in probe mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev mfd: lochnagar: Add support for the Cirrus Logic Lochnagar mfd: lochnagar: Add initial binding documentation dt-bindings: mfd: aspeed-lpc: Make parameter optional mfd: sec-core: Return gracefully instead of BUG() if device cannot match mfd: sm501: Use struct_size() in devm_kzalloc() mfd: sm501: Fix potential NULL pointer dereference mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies mfd: tps65218.c: Add input voltage options mfd: wm8400-core: Make it explicitly non-modular mfd: wm8350-core: Drop unused module infrastructure from non-modular code mfd: wm8350-i2c: Make it explicitly non-modular mfd: wm831x-core: Drop unused module infrastructure from non-modular code ...
2019-03-08Merge tag 'rtc-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is an unusual amount of new drivers this cycle, and this explains the number of insertions. Other than that, the changes are the usual fixes and feature addition. Subsystem updates: - new quartz-load-femtofarads DT property for quartz load capacitance - remove rtc_class_ops.read_callback New drivers: - Abracon AB-RTCMC-32.768kHz-EOZ9 - Amlogic Meson RTC - Cadence RTC IP - Microcrystal RV3028 - Whwave sd3078 Driver updates: - cmos: ignore bogus century byte - ds1307: rework rx8130 support - isl1208: add isl1209 support, nvmem support - rs5C372: report invalid time when the oscillator stopped - rx8581: add rx8571 support" * tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits) rtc: pic32: convert to SPDX identifier rtc: pic32: let the core handle range rtc: pic32: convert to devm_rtc_allocate_device rtc: update my email address rtc: rv8803: convert to SPDX identifier rtc: rv8803: let the core handle range rtc: tx4939: convert to SPDX identifier rtc: tx4939: use .set_time rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: tx4939: set range rtc: tx4939: remove useless test rtc: zynqmp: let the core handle range rtc: zynqmp: fix possible race condition rtc: imx-sc: use rtc_time64_to_tm rtc: rx8581: Add support for Epson rx8571 RTC dt-bindings: rtc: add rx8571 compatible rtc: pcf85063: remove dead code rtc: remove rtc_class_ops.read_callback rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support dt-bindings: rtc: add ABEOZ9 ...
2019-03-08Merge branch 'i2c/for-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - the I2C core gained helpers to assist drivers in handling their suspended state, and drivers were converted to use it - two new fault-injectors for stress-testing - bigger refactoring and feature improvements for the ocores, sh_mobile, and tegra drivers - platform_data removal for the at24 EEPROM driver - ... and various improvements and bugfixes all over the subsystem * 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits) i2c: Allow recovery of the initial IRQ by an I2C client device. i2c: ocores: turn incomplete kdoc into a comment i2c: designware: Do not allow i2c_dw_xfer() calls while suspended i2c: tegra: Only display error messages if DMA setup fails i2c: gpio: fault-injector: add 'inject_panic' injector i2c: gpio: fault-injector: add 'lose_arbitration' injector i2c: tegra: remove multi-master support i2c: tegra: remove master fifo support on tegra186 i2c: tegra: change phrasing, "fallbacking" to "falling back" i2c: expand minor range when registering chrdev region i2c: aspeed: Add multi-master use case support i2c: core-smbus: don't trace smbus_reply data on errors i2c: ocores: Add support for bus clock via platform data i2c: ocores: Add support for IO mapper registers. i2c: ocores: checkpatch fixes i2c: ocores: add SPDX tag i2c: ocores: add polling interface i2c: ocores: do not handle IRQ if IF is not set i2c: ocores: stop transfer on timeout i2c: tegra: add i2c interface timing support ...
2019-03-08Merge tag 'for-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Nothing too fancy in the power-supply subsystem this time. There are less patches than usual, since I did not have enough time to review them in time. The good news is, that all patches have been in linux-next for more than two weeks and there are no complicated cross-subsystem patchsets this time! Summary: - at91-reset: add sam9x60 support - sc27xx: improve capacity logic - goldfish_battery: enhance driver by adding many new properties - isp1704: drop platform data and migrate to gpiod - misc small fixes and improvements" * tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (25 commits) power: reset: at91-reset: add support for sam9x60 SoC dt-bindings: arm: atmel: add new sam9x60 reset controller binding dt-bindings: arm: atmel: add missing samx7 to reset controller max17042_battery: fix potential use-after-free on device remove power: supply: core: Add a field to support battery max voltage dt-bindings: power: supply: Add voltage-max-design-microvolt property bq27x00: use cached flags power: supply: ds2782: fix possible use-after-free on remove power: supply: bq25890: show max charge current/voltage as configured power: supply: sc27xx: Fix capacity saving function power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter power: supply: sc27xx: Add one property to read charge voltage dt-bindings: power: sc27xx: Add one IIO channel to read charge voltage drivers: power: supply: goldfish_battery: Add support for reading more properties power: supply: charger-manager: Fix trivial language typos cpcap-charger: generate events for userspace power: supply: remove some duplicated includes power: twl4030: fix a missing check of return value drivers: power: supply: goldfish_battery: Use tabs for alignment drivers: power: supply: goldfish_battery: Fix alignment ...
2019-03-08Merge tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "A couple of bug fixes and a bunch of code cleanup: - Fix a use after free error in a certain error situation. - Fix some flag handling issues in the SSIF (I2C) IPMI driver. - A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx, use standard UUID handling, and some other minor stuff. - The IPMI code was creating a platform device if none was supplied. Instead of doing that, have every source that creates an IPMI device supply a device struct. This fixes several issues,including a crash in one situation, and cleans things up a bit" * tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi: ipmi_si: Potential array underflow in hotmod_handler() ipmi_si: Remove hacks for adding a dummy platform devices ipmi_si: Consolidate scanning the platform bus ipmi_si: Remove hotmod devices on removal and exit ipmi_si: Remove hardcode IPMI devices by scanning the platform bus ipmi_si: Switch hotmod to use a platform device ipmi: Consolidate the adding of platform devices ipmi_si: Rename addr_type to addr_space to match what it does ipmi_si: Convert some types into unsigned ipmi_si: Fix crash when using hard-coded device ipmi: Use dedicated API for copying a UUID ipmi: Use defined constant for UUID representation ipmi:ssif: Change some pr_xxx to dev_xxx calls ipmi: kcs_bmc: handle devm_kasprintf() failure case ipmi: Fix return value when a message is truncated ipmi: clean an indentation issue, remove extraneous space ipmi: Make the smi watcher be disabled immediately when not needed ipmi: Fix how the lower layers are told to watch for messages ipmi: Fix SSIF flag requests ipmi_si: fix use-after-free of resource->name
2019-03-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Jiri Kosina: - support for something we call 'atomic replace', and allows for much better handling of cumulative patches (which is something very useful for distros), from Jason Baron with help of Petr Mladek and Joe Lawrence - improvement of handling of tasks blocking finalization, from Miroslav Benes - update of MAINTAINERS file to reflect move towards group maintainership * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits) livepatch/selftests: use "$@" to preserve argument list livepatch: Module coming and going callbacks can proceed with all listed patches livepatch: Proper error handling in the shadow variables selftest livepatch: return -ENOMEM on ptr_id() allocation failure livepatch: Introduce klp_for_each_patch macro livepatch: core: Return EOPNOTSUPP instead of ENOSYS selftests/livepatch: add DYNAMIC_DEBUG config dependency livepatch: samples: non static warnings fix livepatch: update MAINTAINERS livepatch: Remove signal sysfs attribute livepatch: Send a fake signal periodically selftests/livepatch: introduce tests livepatch: Remove ordering (stacking) of the livepatches livepatch: Atomic replace and cumulative patches documentation livepatch: Remove Nop structures when unused livepatch: Add atomic replace livepatch: Use lists to manage patches, objects and functions livepatch: Simplify API by removing registration step livepatch: Don't block the removal of patches loaded after a forced transition livepatch: Consolidate klp_free functions ...
2019-03-08Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for the 5.1 merge window. The big changes I'd highlight are: - nouveau has HMM support now, there is finally an in-tree user so we can quieten down the rip it out people. - i915 now enables fastboot by default on Skylake+ - Displayport Multistream support has been refactored and should hopefully be more reliable. Core: - header cleanups aiming towards removing drmP.h - dma-buf fence seqnos to 64-bits - common helper for DP mst hotplug for radeon,i915,amdgpu + new refcounting scheme - MST i2c improvements - drm_syncobj_cb removal - ARM FB compression fourcc - P010 + P016 fourcc - allwinner tiled format modifier - i2c over aux I2C_M_STOP support - DRM_AUTH handling fixes TTM: - ref/unref renaming New driver: - ARM komeda display driver scheduler: - refactor mirror list handling - rework hw fence processing - 0 run queue entity fix bridge: - TI DS90C185 LVDS bridge - thc631lvdm83d bridge improvements - cadence + allwinner DSI ported to generic phy panels: - Sitronix ST7701 panel - Kingdisplay KD097D04 - LeMaker BL035-RGB-002 - PDA 91-00156-A0 - Innolux EE101IA-01D i915: - Enable fastboot by default on SKL+/VLV/CHV - Export RPCS configuration for ICL media driver - Coffelake PCI ID - CNL clocks setup fixes - ACPI/PMIC support for MIPI/DSI - Per-engine WA init for all engines - Shrinker locking fixes - Kerneldoc updates - Lots of ring improvements and reset fixes - Coffeelake GVT Support - VFIO GVT EDID Region support - runtime PM wakeref tracking - ILK->IVB primary plane enable delays - userptr mutex locking fixes - DSI fixes - LVDS/TV cleanups - HW readout fixes - LUT robustness fixes - ICL display and watermark fixes - gem mmap race fix amdgpu: - add scheduled dependencies interface - DCC on scanout surfaces - vega10/20 BACO support - Multiple IH rings on soc15 - XGMI locking fixes - DC i2c/aux cleanups - runtime SMU debug interface - Kexec improvmeents - SR-IOV fixes - DC freesync + ABM fixes - GDS fixes - GPUVM fixes - vega20 PCIE DPM switching fixes - Context priority handling fixes radeon: - fix missing break in evergreen parser nouveau: - SVM support via HMM msm: - QCOM Compressed modifier support exynos: - s5pv210 rotator support imx: - zpos property support - pending update fixes v3d: - cache flush improvments vc4: - reflection support - HDMI overscan support tegra: - CEC refactoring - HDMI audio fixes - Tegra186 prep work - SOR crossbar device tree fixes sun4i: - implicit fencing support - YUV and scalar support improvements - A23 support - tiling fixes atmel-hlcdc: - clipping and rotation property fixes qxl: - BO and PRIME improvements - generic fbdev emulation dw-hdmi: - HDMI 2.0 2160p - YUV420 ouput rockchip: - implicit fencing support - reflection proerties virtio-gpu: - use generic fbdev emulation tilcdc: - cpufreq vs crtc init fix rcar-du: - R8A774C0 support - D3/E3 RGB output routing fixes and DPAD0 support - RA87744 LVDS support bochs: - atomic and generic fbdev emulation - ID mismatch error on bochs load meson: - remove firmware fbs" * tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits) drm/amd/display: Use vrr friendly pageflip throttling in DC. drm/imx: only send commit done event when all state has been applied drm/imx: allow building under COMPILE_TEST drm/imx: imx-tve: depend on COMMON_CLK drm/imx: ipuv3-plane: add zpos property drm/imx: ipuv3-plane: add function to query atomic update status gpu: ipu-v3: prg: add function to get channel configure status gpu: ipu-v3: pre: add double buffer status readback drm/amdgpu: Bump amdgpu version for context priority override. drm/amdgpu/powerplay: fix typo in BACO header guards drm/amdgpu/powerplay: fix return codes in BACO code drm/amdgpu: add missing license on baco files drm/bochs: Fix the ID mismatch error drm/nouveau/dmem: use dma addresses during migration copies drm/nouveau/dmem: use physical vram addresses during migration copies drm/nouveau/dmem: extend copy function to allow direct use of physical addresses drm/nouveau/svm: new ioctl to migrate process memory to GPU memory drm/nouveau/dmem: device memory helpers for SVM drm/nouveau/svm: initial support for shared virtual memory drm/nouveau: prepare for enabling svm with existing userspace interfaces ...
2019-03-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - some of the rest of MM - various misc things - dynamic-debug updates - checkpatch - some epoll speedups - autofs - rapidio - lib/, lib/lzo/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits) samples/mic/mpssd/mpssd.h: remove duplicate header kernel/fork.c: remove duplicated include include/linux/relay.h: fix percpu annotation in struct rchan arch/nios2/mm/fault.c: remove duplicate include unicore32: stop printing the virtual memory layout MAINTAINERS: fix GTA02 entry and mark as orphan mm: create the new vm_fault_t type arm, s390, unicore32: remove oneliner wrappers for memblock_alloc() arch: simplify several early memory allocations openrisc: simplify pte_alloc_one_kernel() sh: prefer memblock APIs returning virtual address microblaze: prefer memblock API returning virtual address powerpc: prefer memblock APIs returning virtual address lib/lzo: separate lzo-rle from lzo lib/lzo: implement run-length encoding lib/lzo: fast 8-byte copy on arm64 lib/lzo: 64-bit CTZ on arm64 lib/lzo: tidy-up ifdefs ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size ipc: annotate implicit fall through ...
2019-03-07include/linux/relay.h: fix percpu annotation in struct rchanLuc Van Oostenryck
The percpu member of this structure is declared as: struct ... ** __percpu member; So its type is: __percpu pointer to pointer to struct ... But looking at how it's used, its type should be: pointer to __percpu pointer to struct ... and it should thus be declared as: struct ... * __percpu *member; So fix the placement of '__percpu' in the definition of this structures. This silents a few Sparse's warnings like: warning: incorrect type in initializer (different address spaces) expected void const [noderef] <asn:3> *__vpp_verify got struct sched_domain ** Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com Fixes: 017c59c042d01 ("relay: Use per CPU constructs for the relay channel buffer pointers") Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Jens Axboe <axboe@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07mm: create the new vm_fault_t typeSouptick Joarder
Page fault handlers are supposed to return VM_FAULT codes, but some drivers/file systems mistakenly return error numbers. Now that all drivers/file systems have been converted to use the vm_fault_t return type, change the type definition to no longer be compatible with 'int'. By making it an unsigned int, the function prototype becomes incompatible with a function which returns int. Sparse will detect any attempts to return a value which is not a VM_FAULT code. VM_FAULT_SET_HINDEX and VM_FAULT_GET_HINDEX values are changed to avoid conflict with other VM_FAULT codes. [jrdr.linux@gmail.com: fix warnings] Link: http://lkml.kernel.org/r/20190109183742.GA24326@jordon-HP-15-Notebook-PC Link: http://lkml.kernel.org/r/20190108183041.GA12137@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: separate lzo-rle from lzoDave Rodgman
To prevent any issues with persistent data, separate lzo-rle from lzo so that it is treated as a separate algorithm, and lzo is still available. Link: http://lkml.kernel.org/r/20190205155944.16007-3-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: implement run-length encodingDave Rodgman
Patch series "lib/lzo: run-length encoding support", v5. Following on from the previous lzo-rle patchset: https://lkml.org/lkml/2018/11/30/972 This patchset contains only the RLE patches, and should be applied on top of the non-RLE patches ( https://lkml.org/lkml/2019/2/5/366 ). Previously, some questions were raised around the RLE patches. I've done some additional benchmarking to answer these questions. In short: - RLE offers significant additional performance (data-dependent) - I didn't measure any regressions that were clearly outside the noise One concern with this patchset was around performance - specifically, measuring RLE impact separately from Matt Sealey's patches (CTZ & fast copy). I have done some additional benchmarking which I hope clarifies the benefits of each part of the patchset. Firstly, I've captured some memory via /dev/fmem from a Chromebook with many tabs open which is starting to swap, and then split this into 4178 4k pages. I've excluded the all-zero pages (as zram does), and also the no-zero pages (which won't tell us anything about RLE performance). This should give a realistic test dataset for zram. What I found was that the data is VERY bimodal: 44% of pages in this dataset contain 5% or fewer zeros, and 44% contain over 90% zeros (30% if you include the no-zero pages). This supports the idea of special-casing zeros in zram. Next, I've benchmarked four variants of lzo on these pages (on 64-bit Arm at max frequency): baseline LZO; baseline + Matt Sealey's patches (aka MS); baseline + RLE only; baseline + MS + RLE. Numbers are for weighted roundtrip throughput (the weighting reflects that zram does more compression than decompression). https://drive.google.com/file/d/1VLtLjRVxgUNuWFOxaGPwJYhl_hMQXpHe/view?usp=sharing Matt's patches help in all cases for Arm (and no effect on Intel), as expected. RLE also behaves as expected: with few zeros present, it makes no difference; above ~75%, it gives a good improvement (50 - 300 MB/s on top of the benefit from Matt's patches). Best performance is seen with both MS and RLE patches. Finally, I have benchmarked the same dataset on an x86-64 device. Here, the MS patches make no difference (as expected); RLE helps, similarly as on Arm. There were no definite regressions; allowing for observational error, 0.1% (3/4178) of cases had a regression > 1 standard deviation, of which the largest was 4.6% (1.2 standard deviations). I think this is probably within the noise. https://drive.google.com/file/d/1xCUVwmiGD0heEMx5gcVEmLBI4eLaageV/view?usp=sharing One point to note is that the graphs show RLE appears to help very slightly with no zeros present! This is because the extra code causes the clang optimiser to change code layout in a way that happens to have a significant benefit. Taking baseline LZO and adding a do-nothing line like "__builtin_prefetch(out_len);" immediately before the "goto next" has the same effect. So this is a real, but basically spurious effect - it's small enough not to upset the overall findings. This patch (of 3): When using zram, we frequently encounter long runs of zero bytes. This adds a special case which identifies runs of zeros and encodes them using run-length encoding. This is faster for both compression and decompresion. For high-entropy data which doesn't hit this case, impact is minimal. Compression ratio is within a few percent in all cases. This modifies the bitstream in a way which is backwards compatible (i.e., we can decompress old bitstreams, but old versions of lzo cannot decompress new bitstreams). Link: http://lkml.kernel.org/r/20190205155944.16007-2-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07init/calibrate.c: provide proper prototypeValdis Kletnieks
Sparse issues a warning: CHECK init/calibrate.c init/calibrate.c:271:28: warning: symbol 'calibration_delay_done' was not declared. Should it be static? The actual issue is that it's a __weak symbol that archs can override (in fact, ARM does so), but no prototype is provided. Let's provide one to prevent surprises. Link: http://lkml.kernel.org/r/18827.1548750938@turing-police.cc.vt.edu Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07include/linux/bitops.h: set_mask_bits() to return old valueVineet Gupta
| > Also, set_mask_bits is used in fs quite a bit and we can possibly come up | > with a generic llsc based implementation (w/o the cmpxchg loop) | | May I also suggest changing the return value of set_mask_bits() to old. | | You can compute the new value given old, but you cannot compute the old | value given new, therefore old is the better return value. Also, no | current user seems to use the return value, so changing it is without | risk. Link: http://lkml.kernel.org/g/20150807110955.GH16853@twins.programming.kicks-ass.net Link: http://lkml.kernel.org/r/1548275584-18096-4-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07ACPI: implement acpi_handle_debug in terms of _dynamic_func_callRasmus Villemoes
With coming changes on x86-64, all dynamic debug descriptors in a translation unit must have distinct names. The macro _dynamic_func_call takes care of that. No functional change. Link: http://lkml.kernel.org/r/20190212214150.4807-15-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07ACPI: remove unused __acpi_handle_debug macroRasmus Villemoes
If CONFIG_DYNAMIC_DEBUG is not set, acpi_handle_debug directly invokes acpi_handle_printk (if DEBUG) or does a no-printk (if !DEBUG). So this macro is never used. Link: http://lkml.kernel.org/r/20190212214150.4807-14-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07ACPI: use proper DYNAMIC_DEBUG_BRANCH macroRasmus Villemoes
dynamic debug may be implemented via static keys, but ACPI is missing out on that runtime benefit since it open-codes one possible definition of DYNAMIC_DEBUG_BRANCH. Link: http://lkml.kernel.org/r/20190212214150.4807-13-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07dynamic_debug: refactor dynamic_pr_debug and friendsRasmus Villemoes
For the upcoming 'define the _ddebug descriptor in assembly', we need all the descriptors in a translation unit to have distinct names (because asm does not understand C scope). The easiest way to achieve that is as usual with an extra level of macros, passing the identifier to use to the innermost macro, generating it via __UNIQUE_ID or something. However, instead of repeating that exercise for dynamic_pr_debug, dynamic_dev_dbg, dynamic_netdev_dbg and dynamic_hex_dump separately, we can use the similarity between their bodies to implement them via a common macro, _dynamic_func_call - though the hex_dump case requires a slight variant, since print_hex_dump does not take the _ddebug descriptor. We'll also get to use that variant elsewhere (btrfs). Link: http://lkml.kernel.org/r/20190212214150.4807-11-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07dynamic_debug: add static inline stub for ddebug_add_moduleRasmus Villemoes
For symmetry with ddebug_remove_module, and to avoid a bit of ifdeffery in module.c, move the declaration of ddebug_add_module inside #if defined(CONFIG_DYNAMIC_DEBUG) and add a corresponding no-op stub in the #else branch. Link: http://lkml.kernel.org/r/20190212214150.4807-10-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07dynamic_debug: consolidate DEFINE_DYNAMIC_DEBUG_METADATA definitionsRasmus Villemoes
Instead of defining DEFINE_DYNAMIC_DEBUG_METADATA in terms of a helper DEFINE_DYNAMIC_DEBUG_METADATA_KEY, that needs another helper dd_key_init to be properly defined, just make the various #ifdef branches define a _DPRINTK_KEY_INIT that can be used directly, similar to _DPRINTK_FLAGS_DEFAULT. Link: http://lkml.kernel.org/r/20190212214150.4807-5-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07linux/printk.h: use DYNAMIC_DEBUG_BRANCH in pr_debug_ratelimitedRasmus Villemoes
pr_debug_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-4-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Petr Mladek <pmladek@suse.com> Acked-by: Jason Baron <jbaron@akamai.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07linux/net.h: use DYNAMIC_DEBUG_BRANCH in net_dbg_ratelimitedRasmus Villemoes
net_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-3-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07linux/device.h: use DYNAMIC_DEBUG_BRANCH in dev_dbg_ratelimitedRasmus Villemoes
Patch series "various dynamic_debug patches", v4. This started as an experiment to see how hard it would be to change the four pointers in struct _ddebug into relative offsets, a la CONFIG_GENERIC_BUG_RELATIVE_POINTERS, thus saving 16 bytes per pr_debug site (and thus exactly making up for the extra space used by the introduction of jump labels in 9049fc74). I stumbled on a few things that are probably worth fixing regardless of whether that goal is deemed worthwhile. Back at v3 (in November), I redid the implementation on top of the fancy new asm-macros stuff. Luckily enough, v3 didn't get picked up, since the asm-macros were backed out again. I still want to do the relative-pointers thing eventually, but we're close to the merge window opening, so here's just most of the "incidental" patches, some of which also serve as preparation for the relative pointers. This patch (of 4): dev_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-2-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07include/linux/pid.h: remove next_pidmap() declarationNadav Amit
Commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR API") removed next_pidmap() but left its declaration. Remove it. No functional change. Link: http://lkml.kernel.org/r/20190213113736.21922-1-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gargi Sharma <gs051095@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07linux/kernel.h: split *_MAX and *_MIN macros into <linux/limits.h>Masahiro Yamada
<linux/kernel.h> tends to be cluttered because we often put various sort of unrelated stuff in it. So, we have split out a sensible chunk of code into a separate header from time to time. This commit splits out the *_MAX and *_MIN defines. The standard header <limits.h> contains various MAX, MIN constants including numerial limits. [1] I think it makes sense to move in-kernel MAX, MIN constants into include/linux/limits.h. We already have include/uapi/linux/limits.h to contain some user-space constants. I changed its include guard to _UAPI_LINUX_LIMITS_H. This change has no impact to the user-space because scripts/headers_install.sh rips off the '_UAPI' prefix from the include guards of exported headers. [1] http://pubs.opengroup.org/onlinepubs/009604499/basedefs/limits.h.html Link: http://lkml.kernel.org/r/1549156242-20806-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07linux/kernel.h: use 'short' to define USHRT_MAX, SHRT_MAX, SHRT_MINMasahiro Yamada
The commit log of 44f564a4bf6a ("ipc: add definitions of USHORT_MAX and others") did not explain why it used (s16) and (u16) instead of (short) and (unsigned short). Let's use (short) and (unsigned short), which is more sensible, and more consistent with the other MAX/MIN defines. As you see in include/uapi/asm-generic/int-ll64.h, s16/u16 are typedef'ed as signed/unsigned short. So, this commit does not have a functional change. Remove the unneeded parentheses around ~0U while we are here. Link: http://lkml.kernel.org/r/1549156242-20806-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Zhang Yanmin <yanmin.zhang@intel.com> Cc: Alex Elder <elder@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07linux/fs.h: move member alignment check next to definition of struct filenameRasmus Villemoes
Instead of doing this compile-time check in some slightly arbitrary user of struct filename, put it next to the definition. Link: http://lkml.kernel.org/r/20190208203015.29702-3-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07build_bug.h: add wrapper for _Static_assertRasmus Villemoes
BUILD_BUG_ON() is a little annoying, since it cannot be used outside function scope. So one cannot put assertions about the sizeof() a struct next to the struct definition, but has to hide that in some more or less arbitrary function. Since gcc 4.6 (which is now also the required minimum), there is support for the C11 _Static_assert in all C modes, including gnu89. So add a simple wrapper for that. _Static_assert() requires a message argument, which is usually quite redundant (and I believe that bug got fixed at least in newer C++ standards), but we can easily work around that with a little macro magic, making it optional. For example, adding static_assert(sizeof(struct printf_spec) == 8); in vsprintf.c and modifying that struct to violate it, one gets ./include/linux/build_bug.h:78:41: error: static assertion failed: "sizeof(struct printf_spec) == 8" #define __static_assert(expr, msg, ...) _Static_assert(expr, "" msg "") godbolt.org suggests that _Static_assert() has been support by clang since at least 3.0.0. Link: http://lkml.kernel.org/r/20190208203015.29702-1-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07include/linux/types.h: use "unsigned int" instead of "unsigned"WangBo
Use "unsigned int" instead of "unsigned", to make code more clear. Link: http://lkml.kernel.org/r/1551354739-6648-1-git-send-email-wdjjwb@163.com Signed-off-by: WangBo <wang.bo116@zte.com.cn> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07<linux/kernel.h>: drop the gcc-3.3 'const' hack in roundup()Randy Dunlap
The single quotation marks around "const" were causing a documentation markup warning with reST. Instead of fixing that warning, just delete that comment line and the gcc-3.3 hack of using "const" in the roundup() macro since gcc-3.3 is no longer supported for kernel builds. I did around 20 different $arch builds with no problems, but we'll just have to see if this causes problems for anyone else out there. Link: http://lkml.kernel.org/r/ec5dcf72-7c3e-3513-af0c-4003ed598854@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07kernel.h: unconditionally include asm/div64.h for do_div()Jani Nikula
Include asm/div64.h for do_div() usage in DIV_ROUND_DOWN_ULL() and DIV_ROUND_CLOSEST_ULL(). Remove the old CONFIG_LBDAF=y conditional include. Link: http://lkml.kernel.org/r/20181228153430.23763-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Various cleanups and simplifications, none of them really stands out, they are all over the place" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/uaccess: Remove unused __addr_ok() macro x86/smpboot: Remove unused phys_id variable x86/mm/dump_pagetables: Remove the unused prev_pud variable x86/fpu: Move init_xstate_size() to __init section x86/cpu_entry_area: Move percpu_setup_debug_store() to __init section x86/mtrr: Remove unused variable x86/boot/compressed/64: Explain paging_prepare()'s return value x86/resctrl: Remove duplicate MSR_MISC_FEATURE_CONTROL definition x86/asm/suspend: Drop ENTRY from local data x86/hw_breakpoints, kprobes: Remove kprobes ifdeffery x86/boot: Save several bytes in decompressor x86/trap: Remove useless declaration x86/mm/tlb: Remove unused cpu variable x86/events: Mark expected switch-case fall-throughs x86/asm-prototypes: Remove duplicate include <asm/page.h> x86/kernel: Mark expected switch-case fall-throughs x86/insn-eval: Mark expected switch-case fall-through x86/platform/UV: Replace kmalloc() and memset() with k[cz]alloc() calls x86/e820: Replace kmalloc() + memcpy() with kmemdup()
2019-03-07Merge tag 'powerpc-5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Enable THREAD_INFO_IN_TASK to move thread_info off the stack. - A big series from Christoph reworking our DMA code to use more of the generic infrastructure, as he said: "This series switches the powerpc port to use the generic swiotlb and noncoherent dma ops, and to use more generic code for the coherent direct mapping, as well as removing a lot of dead code." - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing us to support machines with larger amounts of total RAM or distance between nodes. - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit CPUs. - Support for KCOV coverage instrumentation which means we can run syzkaller and discover even more bugs in our code. And as always many clean-ups, reworks and minor fixes etc. Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/32: Clear on-stack exception marker upon exception return powerpc: Remove export of save_stack_trace_tsk_reliable() powerpc/mm: fix "section_base" set but not used powerpc/mm: Fix "sz" set but not used warning powerpc/mm: Check secondary hash page table powerpc: remove nargs from __SYSCALL powerpc/64s: Fix unrelocated interrupt trampoline address test powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables powerpc/fsl: Fix the flush of branch predictor. powerpc/powernv: Make opal log only readable by root powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C powerpc/64s: Fix data interrupts vs d-side MCE reentrancy powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy powerpc/64s: system reset interrupt preserve HSRRs powerpc/64s: Fix HV NMI vs HV interrupt recoverability test powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback selftests/powerpc: Remove duplicate header powerpc sstep: Add support for modsd, modud instructions ...
2019-03-07Merge tag 'audit-pr-20190305' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "A lucky 13 audit patches for v5.1. Despite the rather large diffstat, most of the changes are from two bug fix patches that move code from one Kconfig option to another. Beyond that bit of churn, the remaining changes are largely cleanups and bug-fixes as we slowly march towards container auditing. It isn't all boring though, we do have a couple of new things: file capabilities v3 support, and expanded support for filtering on filesystems to solve problems with remote filesystems. All changes pass the audit-testsuite. Please merge for v5.1" * tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: mark expected switch fall-through audit: hide auditsc_get_stamp and audit_serial prototypes audit: join tty records to their syscall audit: remove audit_context when CONFIG_ AUDIT and not AUDITSYSCALL audit: remove unused actx param from audit_rule_match audit: ignore fcaps on umount audit: clean up AUDITSYSCALL prototypes and stubs audit: more filter PATH records keyed on filesystem magic audit: add support for fcaps v3 audit: move loginuid and sessionid from CONFIG_AUDITSYSCALL to CONFIG_AUDIT audit: add syscall information to CONFIG_CHANGE records audit: hand taken context to audit_kill_trees for syscall logging audit: give a clue what CONFIG_CHANGE op was involved
2019-03-07Merge branch 'next-general' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: - Extend LSM stacking to allow sharing of cred, file, ipc, inode, and task blobs. This paves the way for more full-featured LSMs to be merged, and is specifically aimed at LandLock and SARA LSMs. This work is from Casey and Kees. - There's a new LSM from Micah Morton: "SafeSetID gates the setid family of syscalls to restrict UID/GID transitions from a given UID/GID to only those approved by a system-wide whitelist." This feature is currently shipping in ChromeOS. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (62 commits) keys: fix missing __user in KEYCTL_PKEY_QUERY LSM: Update list of SECURITYFS users in Kconfig LSM: Ignore "security=" when "lsm=" is specified LSM: Update function documentation for cap_capable security: mark expected switch fall-throughs and add a missing break tomoyo: Bump version. LSM: fix return value check in safesetid_init_securityfs() LSM: SafeSetID: add selftest LSM: SafeSetID: remove unused include LSM: SafeSetID: 'depend' on CONFIG_SECURITY LSM: Add 'name' field for SafeSetID in DEFINE_LSM LSM: add SafeSetID module that gates setid calls LSM: add SafeSetID module that gates setid calls tomoyo: Allow multiple use_group lines. tomoyo: Coding style fix. tomoyo: Swicth from cred->security to task_struct->security. security: keys: annotate implicit fall throughs security: keys: annotate implicit fall throughs security: keys: annotate implicit fall through capabilities:: annotate implicit fall through ...
2019-03-07Merge branch 'for-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Oleg's pids controller accounting update which gets rid of rcu delay in pids accounting updates - rstat (cgroup hierarchical stat collection mechanism) optimization - Doc updates * 'for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: remove unused task_has_mempolicy() cgroup, rstat: Don't flush subtree root unless necessary cgroup: add documentation for pids.events file Documentation: cgroup-v2: eliminate markup warnings MAINTAINERS: Update cgroup entry cgroup/pids: turn cgroup_subsys->free() into cgroup_subsys->release() to fix the accounting
2019-03-07Merge tag 'fsnotify_for_v5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fanotify updates from Jan Kara: "Support for fanotify directory events and changes to make waiting for fanotify permission event response killable" * tag 'fsnotify_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (25 commits) fanotify: Make waits for fanotify events only killable fanotify: Use interruptible wait when waiting for permission events fanotify: Track permission event state fanotify: Simplify cleaning of access_list fsnotify: Create function to remove event from notification list fanotify: Move locking inside get_one_event() fanotify: Fold dequeue_event() into process_access_response() fanotify: Select EXPORTFS fanotify: report FAN_ONDIR to listener with FAN_REPORT_FID fanotify: add support for create/attrib/move/delete events fanotify: support events with data type FSNOTIFY_EVENT_INODE fanotify: check FS_ISDIR flag instead of d_is_dir() fsnotify: report FS_ISDIR flag with MOVE_SELF and DELETE_SELF events fanotify: use vfs_get_fsid() helper instead of vfs_statfs() vfs: add vfs_get_fsid() helper fanotify: cache fsid in fsnotify_mark_connector fanotify: enable FAN_REPORT_FID init flag fanotify: copy event fid info to user fanotify: encode file identifier for FAN_REPORT_FID fanotify: open code fill_event_metadata() ...
2019-03-07platform/x86: wmi: move struct wmi_device_id to mod_devicetable.hMattias Jacobsson
In preparation for adding WMI support to MODULE_DEVICE_TABLE() move the definition of struct wmi_device_id to mod_devicetable.h and inline guid_string in the struct. Changing guid_string to an inline char array changes the loop conditions when looping over an array of struct wmi_device_id. Therefore update wmi_dev_match()'s loop to check for an empty guid_string instead of a NULL pointer. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> [dvhart: Move UUID_STRING_LEN define to this patch] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07Merge tag 'dtype_for_v5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull dtype handling cleanups from Jan Kara: "A reworked dtype cleanup patches based on your feedback to the previous version of these. Again the series includes only the generic code and ext2 cleanup as a sample. The plan is to push cleanups for other filesystems separately through respective trees once the generic code lands to reduce the number of conflicts" * tag 'dtype_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: use common file type conversion fs: common implementation of file type
2019-03-07PM-runtime: Call pm_runtime_active|suspended_time() from sysfsUlf Hansson
Avoid the open-coding of the accounted time acquisition in runtime_active|suspend_time_show() and make them call pm_runtime_active|suspended_time() instead. Note that this change also indirectly avoids holding dev->power.lock around the do_div() computation and the sprintf() call which is an additional improvement. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-07drm: move i915_kick_out_vgacon to vgaarbGerd Hoffmann
Also rename it to vga_remove_vgacon and add kerneldoc text. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190301092502.30948-2-kraxel@redhat.com
2019-03-07bpf: only test gso type on gso packetsWillem de Bruijn
BPF can adjust gso only for tcp bytestreams. Fail on other gso types. But only on gso packets. It does not touch this field if !gso_size. Fixes: b90efd225874 ("bpf: only adjust gso_size on bytestream protocols") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-06mailbox: ZynqMP IPI mailbox controllerWendy Liang
This patch is to introduce ZynqMP IPI mailbox controller driver to use the ZynqMP IPI block as mailboxes. Signed-off-by: Wendy Liang <wendy.liang@xilinx.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06Merge tag 'usb-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...
generated by cgit (git 2.34.1) at 2025-09-11 19:32:46 +0000