| Age | Commit message (Collapse) | Author |
|---|
|
Similar to the earlier patch that changes sk_getsockopt() to
take the sockptr_t argument . This patch also changes
do_ipv6_getsockopt() to take the sockptr_t argument such that
a latter patch can make bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt().
Note on the change in ip6_mc_msfget(). This function is to
return an array of sockaddr_storage in optval. This function
is shared between ipv6_get_msfilter() and compat_ipv6_get_msfilter().
However, the sockaddr_storage is stored at different offset of the
optval because of the difference between group_filter and
compat_group_filter. Thus, a new 'ss_offset' argument is
added to ip6_mc_msfget().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002853.2892532-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Similar to the earlier patch that changes sk_getsockopt() to
take the sockptr_t argument. This patch also changes
do_ip_getsockopt() to take the sockptr_t argument such that
a latter patch can make bpf_getsockopt(SOL_IP) to reuse
do_ip_getsockopt().
Note on the change in ip_mc_gsfget(). This function is to
return an array of sockaddr_storage in optval. This function
is shared between ip_get_mcast_msfilter() and
compat_ip_get_mcast_msfilter(). However, the sockaddr_storage
is stored at different offset of the optval because of
the difference between group_filter and compat_group_filter.
Thus, a new 'ss_offset' argument is added to ip_mc_gsfget().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002828.2890585-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes sk_getsockopt() to take the sockptr_t argument
such that it can be used by bpf_getsockopt(SOL_SOCKET) in a
latter patch.
security_socket_getpeersec_stream() is not changed. It stays
with the __user ptr (optval.user and optlen.user) to avoid changes
to other security hooks. bpf_getsockopt(SOL_SOCKET) also does not
support SO_PEERSEC.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002802.2888419-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for some oft-reported problems
in 6.0-rc1. They include:
- a bunch of reverts to handle driver_deferred_probe_check_state()
problems that were part of the 6.0-rc1 merge.
- firmware_loader bugfixes now that the code is being properly tested
and used by others
- arch_topology fix
- deferred driver probe bugfix to solve a long-suffering amba bus
problem that many people have reported.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: Fix memory leak in firmware upload
firmware_loader: Fix use-after-free during unregister
arch_topology: Silence early cacheinfo errors when non-existent
driver core: Don't probe devices after bus_type.match() probe deferral
Revert "iommu/of: Delete usage of driver_deferred_probe_check_state()"
Revert "PM: domains: Delete usage of driver_deferred_probe_check_state()"
Revert "net: mdio: Delete usage of driver_deferred_probe_check_state()"
Revert "driver core: Delete driver_deferred_probe_check_state()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt driver fixes from Greg KH:
"Here are a lot of small USB and Thunderbolt driver fixes for 6.0-rc4
for reported problems. Included in here are:
- new usb-serial driver ids
- dwc3 driver bugfixes for reported problems with 6.0-rc1
- new device quirks, and reverts of some quirks that were incorrect
- gadget driver bugfixes for reported problems
- USB host controller bugfixes (xhci and others)
- other small USB fixes, details in the shortlog
- small thunderbolt driver fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (51 commits)
Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"
usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS
USB: serial: ch341: fix disabled rx timer on older devices
USB: serial: ch341: fix lost character on LCR updates
USB: serial: cp210x: add Decagon UCA device id
Revert "usb: add quirks for Lenovo OneLink+ Dock"
usb: cdns3: fix issue with rearming ISO OUT endpoint
usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer
usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS
media: mceusb: Use new usb_control_msg_*() routines
USB: core: Prevent nested device-reset calls
USB: gadget: Fix obscure lockdep violation for udc_mutex
usb: dwc2: fix wrong order of phy_power_on and phy_init
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
usb: typec: Remove retimers properly
usb: dwc3: disable USB core PHY management
usb: add quirks for Lenovo OneLink+ Dock
USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode
USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id
USB: serial: option: add Quectel EM060K modem
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: p2sb: Fix UAF when caller uses resource name
platform/x86: asus-wmi: Increase FAN_CURVE_BUF_LEN to 32
platform/mellanox: Remove redundant 'NULL' check
platform/mellanox: Remove unnecessary code
platform/mellanox: mlxreg-lc: Fix locking issue
platform/mellanox: mlxreg-lc: Fix coverity warning
platform/x86: acer-wmi: Acer Aspire One AOD270/Packard Bell Dot keymap fixes
platform/x86: thinkpad_acpi: Explicitly set to balanced mode on startup
platform/x86: asus-wmi: Fix the name of the mic-mute LED classdev
platform/surface: aggregator_registry: Add HID devices for sensors and UCSI client to SP8
platform/surface: aggregator_registry: Rename HID device nodes based on new findings
platform/surface: aggregator_registry: Rename HID device nodes based on their function
platform/surface: aggregator_registry: Add support for Surface Laptop Go 2
platform/x86: x86-android-tablets: Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask
|
|
Commit a657182a5c51 ("bpf: Don't use tnum_range on array range checking
for poke descriptors") has shown that using tnum_range() as argument to
tnum_in() can lead to misleading code that looks like tight bound check
when in fact the actual allowed range is much wider.
Document such behavior to warn against its usage in general, and suggest
some scenario where result can be trusted.
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/984b37f9fdf7ac36831d2137415a4a915744c1b6.1661462653.git.daniel@iogearbox.net
Link: https://www.openwall.com/lists/oss-security/2022/08/26/1
Link: https://lore.kernel.org/bpf/20220831031907.16133-3-shung-hsi.yu@suse.com
Link: https://lore.kernel.org/bpf/20220831031907.16133-2-shung-hsi.yu@suse.com
|
|
The spi-mux driver is rather too clever and attempts to resubmit any
message that is submitted to it to the parent controller with some
adjusted callbacks. This does not play at all nicely with the fast
path which now sets flags on the message indicating that it's being
handled through the fast path, we see async messages flagged as being on
the fast path. Ideally the spi-mux code would duplicate the message but
that's rather invasive and a bit fragile in that it relies on the mux
knowing which fields in the message to copy. Instead teach the core
that there are controllers which can't cope with the fast path and have
the mux flag itself as being such a controller, ensuring that messages
going via the mux don't get partially handled via the fast path.
This will reduce the performance of any spi-mux connected device since
we'll now always use the thread for both the actual controller and the
mux controller instead of just the actual controller but given that we
were always hitting the slow path anyway it's hopefully not too much of
an additional cost and it allows us to keep the fast path.
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Reported-by: Casper Andersson <casper.casan@gmail.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220901120732.49245-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc fixes
Here are some fixes for AF_RXRPC:
(1) Fix the handling of ICMP/ICMP6 packets. This is a problem due to
rxrpc being switched to acting as a UDP tunnel, thereby allowing it to
steal the packets before they go through the UDP Rx queue. UDP
tunnels can't get ICMP/ICMP6 packets, however. This patch adds an
additional encap hook so that they can.
(2) Fix the encryption routines in rxkad to handle packets that have more
than three parts correctly. The problem is that ->nr_frags doesn't
count the initial fragment, so the sglist ends up too short.
(3) Fix a problem with destruction of the local endpoint potentially
getting repeated.
(4) Fix the calculation of the time at which to resend.
jiffies_to_usecs() gives microseconds, not nanoseconds.
(5) Fix AFS to work out when callback promises and locks expire based on
the time an op was issued rather than the time the first reply packet
arrives. We don't know how long the server took between calculating
the expiry interval and transmitting the reply.
(6) Given (5), rxrpc_get_reply_time() is no longer used, so remove it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All callers are now gone.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We got a recent syzbot report [1] showing a possible misuse
of pfmemalloc page status in TCP zerocopy paths.
Indeed, for pages coming from user space or other layers,
using page_is_pfmemalloc() is moot, and possibly could give
false positives.
There has been attempts to make page_is_pfmemalloc() more robust,
but not using it in the first place in this context is probably better,
removing cpu cycles.
Note to stable teams :
You need to backport 84ce071e38a6 ("net: introduce
__skb_fill_page_desc_noacc") as a prereq.
Race is more probable after commit c07aea3ef4d4
("mm: add a signature in struct page") because page_is_pfmemalloc()
is now using low order bit from page->lru.next, which can change
more often than page->index.
Low order bit should never be set for lru.next (when used as an anchor
in LRU list), so KCSAN report is mostly a false positive.
Backporting to older kernel versions seems not necessary.
[1]
BUG: KCSAN: data-race in lru_add_fn / tcp_build_frag
write to 0xffffea0004a1d2c8 of 8 bytes by task 18600 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:105 [inline]
lru_add_fn+0x440/0x520 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
folio_batch_add_and_move mm/swap.c:263 [inline]
folio_add_lru+0xf1/0x140 mm/swap.c:490
filemap_add_folio+0xf8/0x150 mm/filemap.c:948
__filemap_get_folio+0x510/0x6d0 mm/filemap.c:1981
pagecache_get_page+0x26/0x190 mm/folio-compat.c:104
grab_cache_page_write_begin+0x2a/0x30 mm/folio-compat.c:116
ext4_da_write_begin+0x2dd/0x5f0 fs/ext4/inode.c:2988
generic_perform_write+0x1d4/0x3f0 mm/filemap.c:3738
ext4_buffered_write_iter+0x235/0x3e0 fs/ext4/file.c:270
ext4_file_write_iter+0x2e3/0x1210
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x468/0x760 fs/read_write.c:578
ksys_write+0xe8/0x1a0 fs/read_write.c:631
__do_sys_write fs/read_write.c:643 [inline]
__se_sys_write fs/read_write.c:640 [inline]
__x64_sys_write+0x3e/0x50 fs/read_write.c:640
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffffea0004a1d2c8 of 8 bytes by task 18611 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1740 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2422 [inline]
skb_fill_page_desc include/linux/skbuff.h:2443 [inline]
tcp_build_frag+0x613/0xb20 net/ipv4/tcp.c:1018
do_tcp_sendpages+0x3e8/0xaf0 net/ipv4/tcp.c:1075
tcp_sendpage_locked net/ipv4/tcp.c:1140 [inline]
tcp_sendpage+0x89/0xb0 net/ipv4/tcp.c:1150
inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1249
__do_sys_sendfile64 fs/read_write.c:1317 [inline]
__se_sys_sendfile64 fs/read_write.c:1303 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1303
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0xffffea0004a1d288
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 18611 Comm: syz-executor.4 Not tainted 6.0.0-rc2-syzkaller-00248-ge022620b5d05-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: c07aea3ef4d4 ("mm: add a signature in struct page")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add some documentation for netdev_tx_sent_queue() and
netdev_tx_completed_queue()
Stating that netdev_tx_completed_queue() must be called once
per TX completion round is apparently not obvious for everybody.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
cast of ->d_name.name to char * is completely wrong - nothing is
allowed to modify its contents.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch implements VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP
device feature. In the VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY, if there is
any access for the VFIO device on the host side, then the device will
be moved out of the low power state without the user's guest driver
involvement. Once the device access has been finished, then the host
can move the device again into low power state. With the low power
entry happened through VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP,
the device will not be moved back into the low power state and
a notification will be sent to the user by triggering wakeup eventfd.
vfio_pci_core_pm_entry() will be called for both the variants of low
power feature entry so add an extra argument for wakeup eventfd context
and store locally in 'struct vfio_pci_core_device'.
For the entry happened without wakeup eventfd, all the exit related
handling will be done by the LOW_POWER_EXIT device feature only.
When the LOW_POWER_EXIT will be called, then the vfio core layer
vfio_device_pm_runtime_get() will increment the usage count and will
resume the device. In the driver runtime_resume callback, the
'pm_wake_eventfd_ctx' will be NULL. Then vfio_pci_core_pm_exit()
will call vfio_pci_runtime_pm_exit() and all the exit related handling
will be done.
For the entry happened with wakeup eventfd, in the driver resume
callback, eventfd will be triggered and all the exit related handling will
be done. When vfio_pci_runtime_pm_exit() will be called by
vfio_pci_core_pm_exit(), then it will return early.
But if the runtime suspend has not happened on the host side, then
all the exit related handling will be done in vfio_pci_core_pm_exit()
only.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220829114850.4341-6-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Currently, if the runtime power management is enabled for vfio-pci
based devices in the guest OS, then the guest OS will do the register
write for PCI_PM_CTRL register. This write request will be handled in
vfio_pm_config_write() where it will do the actual register write of
PCI_PM_CTRL register. With this, the maximum D3hot state can be
achieved for low power. If we can use the runtime PM framework, then
we can achieve the D3cold state (on the supported systems) which will
help in saving maximum power.
1. D3cold state can't be achieved by writing PCI standard
PM config registers. This patch implements the following
newly added low power related device features:
- VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY
- VFIO_DEVICE_FEATURE_LOW_POWER_EXIT
The VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY feature will allow the
device to make use of low power platform states on the host
while the VFIO_DEVICE_FEATURE_LOW_POWER_EXIT will prevent
further use of those power states.
2. The vfio-pci driver uses runtime PM framework for low power entry and
exit. On the platforms where D3cold state is supported, the runtime
PM framework will put the device into D3cold otherwise, D3hot or some
other power state will be used.
There are various cases where the device will not go into the runtime
suspended state. For example,
- The runtime power management is disabled on the host side for
the device.
- The user keeps the device busy after calling LOW_POWER_ENTRY.
- There are dependent devices that are still in runtime active state.
For these cases, the device will be in the same power state that has
been configured by the user through PCI_PM_CTRL register.
3. The hypervisors can implement virtual ACPI methods. For example,
in guest linux OS if PCI device ACPI node has _PR3 and _PR0 power
resources with _ON/_OFF method, then guest linux OS invokes
the _OFF method during D3cold transition and then _ON during D0
transition. The hypervisor can tap these virtual ACPI calls and then
call the low power device feature IOCTL.
4. The 'pm_runtime_engaged' flag tracks the entry and exit to
runtime PM. This flag is protected with 'memory_lock' semaphore.
5. All the config and other region access are wrapped under
pm_runtime_resume_and_get() and pm_runtime_put(). So, if any
device access happens while the device is in the runtime suspended
state, then the device will be resumed first before access. Once the
access has been finished, then the device will again go into the
runtime suspended state.
6. The memory region access through mmap will not be allowed in the low
power state. Since __vfio_pci_memory_enabled() is a common function,
so check for 'pm_runtime_engaged' has been added explicitly in
vfio_pci_mmap_fault() to block only mmap'ed access.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220829114850.4341-5-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This patch adds INTx handling during runtime suspend/resume.
All the suspend/resume related code for the user to put the device
into the low power state will be added in subsequent patches.
The INTx lines may be shared among devices. Whenever any INTx
interrupt comes for the VFIO devices, then vfio_intx_handler() will be
called for each device sharing the interrupt. Inside vfio_intx_handler(),
it calls pci_check_and_mask_intx() and checks if the interrupt has
been generated for the current device. Now, if the device is already
in the D3cold state, then the config space can not be read. Attempt
to read config space in D3cold state can cause system unresponsiveness
in a few systems. To prevent this, mask INTx in runtime suspend callback,
and unmask the same in runtime resume callback. If INTx has been already
masked, then no handling is needed in runtime suspend/resume callbacks.
'pm_intx_masked' tracks this, and vfio_pci_intx_mask() has been updated
to return true if the INTx vfio_pci_irq_ctx.masked value is changed
inside this function.
For the runtime suspend which is triggered for the no user of VFIO
device, the 'irq_type' will be VFIO_PCI_NUM_IRQS and these
callbacks won't do anything.
The MSI/MSI-X are not shared so similar handling should not be
needed for MSI/MSI-X. vfio_msihandler() triggers eventfd_signal()
without doing any device-specific config access. When the user performs
any config access or IOCTL after receiving the eventfd notification,
then the device will be moved to the D0 state first before
servicing any request.
Another option was to check this flag 'pm_intx_masked' inside
vfio_intx_handler() instead of masking the interrupts. This flag
is being set inside the runtime_suspend callback but the device
can be in non-D3cold state (for example, if the user has disabled D3cold
explicitly by sysfs, the D3cold is not supported in the platform, etc.).
Also, in D3cold supported case, the device will be in D0 till the
PCI core moves the device into D3cold. In this case, there is
a possibility that the device can generate an interrupt. Adding check
in the IRQ handler will not clear the IRQ status and the interrupt
line will still be asserted. This can cause interrupt flooding.
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220829114850.4341-4-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
As this is part of the vfio_pci_core component it should be called
vfio_pci_core_register_dev_region() like everything else exported from
this module.
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/2-v2-1bd95d72f298+e0e-vfio_pci_priv_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The header in include/linux should have only the exported interface for
other vfio_pci modules to use. Internal definitions for vfio_pci.ko
should be in a "priv" header along side the .c files.
Move the internal declarations out of vfio_pci_core.h. They either move to
vfio_pci_priv.h or to the C file that is the only user.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/1-v2-1bd95d72f298+e0e-vfio_pci_priv_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
tools/testing/selftests/net/.gitignore
sort the net-next version and use it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'nocb.2022.09.01a', 'poll.2022.08.31b', 'poll-srcu.2022.08.31b' and 'tasks.2022.08.31b' into HEAD
doc.2022.08.31b: Documentation updates
fixes.2022.08.31b: Miscellaneous fixes
kvfree.2022.08.31b: kvfree_rcu() updates
nocb.2022.09.01a: NOCB CPU updates
poll.2022.08.31b: Full-oldstate RCU polling grace-period API
poll-srcu.2022.08.31b: Polled SRCU grace-period updates
tasks.2022.08.31b: Tasks RCU updates
|
|
Batched completions can clear multiple bits, but we're only decrementing
the wait_cnt by one each time. This can cause waiters to never be woken,
stalling IO. Use the batched count instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215679
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220825145312.1217900-1-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add cgroup_file_show() which allows toggling visibility of a cgroup file
using the new kernfs_show(). This will be used to hide psi interface files
on cgroups where it's disabled.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-10-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, kernfs nodes can be created hidden and activated later by calling
kernfs_activate() to allow creation of multiple nodes to succeed or fail as
a unit. This is an one-way one-time-only transition. This patch introduces
kernfs_show() which can toggle visibility dynamically.
As the currently proposed use - toggling the cgroup pressure files - only
requires operating on leaf nodes, for the sake of simplicity, restrict it as
such for now.
Hiding uses the same mechanism as deactivation and likewise guarantees that
there are no in-flight operations on completion. KERNFS_ACTIVATED and
KERNFS_HIDDEN are used to manage the interactions between activations and
show/hide operations. A node is visible iff both activated & !hidden.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-9-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
KERNFS_ACTIVATED tracks whether a given node has ever been activated. As a
node was only deactivated on removal, this was used for
1. Drain optimization (removed by the previous patch).
2. To hide !activated nodes
3. To avoid double activations
4. Reject adding children to a node being removed
5. Skip activaing a node which is being removed.
We want to decouple deactivation from removal so that nodes can be
deactivated and hidden dynamically, which makes KERNFS_ACTIVATED useless for
all of the above purposes.
#1 is already gone. #2 and #3 can instead test whether the node is currently
active. A new flag KERNFS_REMOVING is added to explicitly mark nodes which
are being removed for #4 and #5.
While this leaves KERNFS_ACTIVATED with no users, leave it be as it will be
used in a following patch.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-7-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
devm_ioremap_np has never been used anywhere since it was added in early
2021, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220822061424.151819-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into gpio/for-next
Tag (immutable branch) for:
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
|
|
console_unblank() does this too (called in both places right after),
and with a lot more confidence inspiring approach to locking.
Reconstructing this story is very strange:
In b61312d353da ("oops handling: ensure that any oops is flushed to
the mtdoops console") it is claimed that a printk(" "); flushed out
the console buffer, which was removed in e3e8a75d2acf ("[PATCH]
Extract and use wake_up_klogd()"). In todays kernels this is done way
earlier in console_flush_on_panic with some really nasty tricks. I
didn't bother to fully reconstruct this all, least because the call to
bust_spinlock(0); gets moved every few years, depending upon how the
wind blows (or well, who screamed loudest about the various issue each
call site caused).
Before that commit the only calls to console_unblank() where in s390
arch code.
The other side here is the console->unblank callback, which was
introduced in 2.1.31 for the vt driver. Which predates the
console_unblank() function by a lot, which was added (without users)
in 2.4.14.3. So pretty much impossible to guess at any motivation
here. Also afaict the vt driver is the only (and always was the only)
console driver implementing the unblank callback, so no idea why a
call to console_unblank() was added for the mtdooops driver - the
action actually flushing out the console buffers is done from
console_unlock() only.
Note that as prep for the s390 users the locking was adjusted in
2.5.22 (I couldn't figure out how to properly reference the BK commit
from the historical git trees) from a normal semaphore to a trylock.
Note that a copy of the direct unblank_screen() call was added to
panic() in c7c3f05e341a ("panic: avoid deadlocks in re-entrant console
drivers"), which partially inlined the bust_spinlocks(0); call.
Long story short, I have no idea why the direct call to unblank_screen
survived for so long (the infrastructure to do it properly existed for
years), nor why it wasn't removed when the console_unblank() call was
finally added. But it makes a ton more sense to finally do that than
not - it's just better encapsulation to go through the console
functions instead of doing a direct call, so let's dare. Plus it
really does not make much sense to call the only unblank
implementation there is twice, once without, and once with appropriate
locking.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Cc: Yangxi Xiang <xyangxi5@gmail.com>
Cc: nick black <dankamongmen@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Marco Elver <elver@google.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: David Gow <davidgow@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20220830145004.430545-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tag (immutable branch) for:
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
|
|
This adds support for the Siemens Simatic IPC427G. A board which
basically works like the 227G added in a previous patch. So all there is
to do is to add the station_id and make it take all the 227G branches.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20220825104422.14156-8-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This adds support of the Siemens Simatic IPC227G. Its LEDs are connected
to GPIO pins provided by the gpio-f7188x module. We make sure that
gets loaded, if not enabled in the kernel config no LED support will be
available.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20220825104422.14156-6-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since the HC driver is now passed to the function with its
own parameter (it used to be picked from id->driver_data),
the id parameter serves no purpose.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220831125052.71584-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing
it to siphon off UDP packets early in the handling of received UDP packets
thereby avoiding the packet going through the UDP receive queue, it doesn't
get ICMP packets through the UDP ->sk_error_report() callback. In fact, it
doesn't appear that there's any usable option for getting hold of ICMP
packets.
Fix this by adding a new UDP encap hook to distribute error messages for
UDP tunnels. If the hook is set, then the tunnel driver will be able to
see ICMP packets. The hook provides the offset into the packet of the UDP
header of the original packet that caused the notification.
An alternative would be to call the ->error_handler() hook - but that
requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error()
do, though isn't really necessary or desirable in rxrpc's case is we want
to parse them there and then, not queue them).
Changes
=======
ver #3)
- Fixed an uninitialised variable.
ver #2)
- Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals.
Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
__ksize() is only called by KASAN. Remove export symbol and move
declaration to mm/slab.h as we don't want to grow its callers.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Regroup offset and bitfield definitions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Regroup offset and bitfield definitions
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Regroup offset and bitfield definitions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Regroup offset and bitfield definitions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Regroup offset and bitfields
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
add comment and newline to mark out control stream capabilities and
chmap. These registers are unused by the driver, only dumped in
debugfs.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We removed PDM support a long time ago but kept the definitions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Regroup offset and bitfields, no functionality change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This read-only register only defines an offset which is known already
and a version which isn't used.
Remove unused definition.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
No functionality change, just regroup offset and bitfield definitions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add definition in header file rather than hidden in code.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823053846.2684635-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Despite its name, kmem_cache_alloc[_node]_trace() is hook for inlined
kmalloc. So rename it to kmalloc[_node]_trace().
Move its implementation to slab_common.c by using
__kmem_cache_alloc_node(), but keep CONFIG_TRACING=n varients to save a
function call when CONFIG_TRACING=n.
Use __assume_kmalloc_alignment for kmalloc[_node]_trace instead of
__assume_slab_alignement. Generally kmalloc has larger alignment
requirements.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Currently, the memory type macros are partly defined with multiple
spaces between the macro name and its definition. Replace the spaces
with tabs as the kernel coding style requires.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220822190730.27277-13-Sergey.Semin@baikalelectronics.ru
|
|
Commit 7dd33764486d ("ARM: davinci: Delete DM644x board files") and commit
b4aed01de486 ("ARM: davinci: Delete DM646x board files") removes the
support for DaVinci DM644x and DM646x boards.
Hence, remove the PLL and PSC clock descriptions for those boards as well.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220720082934.17741-1-lukas.bulwahn@gmail.com
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
anon_vma->degree tracks the combined number of child anon_vmas and VMAs
that use the anon_vma as their ->anon_vma.
anon_vma_clone() then assumes that for any anon_vma attached to
src->anon_vma_chain other than src->anon_vma, it is impossible for it to
be a leaf node of the VMA tree, meaning that for such VMAs ->degree is
elevated by 1 because of a child anon_vma, meaning that if ->degree
equals 1 there are no VMAs that use the anon_vma as their ->anon_vma.
This assumption is wrong because the ->degree optimization leads to leaf
nodes being abandoned on anon_vma_clone() - an existing anon_vma is
reused and no new parent-child relationship is created. So it is
possible to reuse an anon_vma for one VMA while it is still tied to
another VMA.
This is an issue because is_mergeable_anon_vma() and its callers assume
that if two VMAs have the same ->anon_vma, the list of anon_vmas
attached to the VMAs is guaranteed to be the same. When this assumption
is violated, vma_merge() can merge pages into a VMA that is not attached
to the corresponding anon_vma, leading to dangling page->mapping
pointers that will be dereferenced during rmap walks.
Fix it by separately tracking the number of child anon_vmas and the
number of VMAs using the anon_vma as their ->anon_vma.
Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy")
Cc: stable@kernel.org
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add mt8186 mutex mod settings for mdp3.
Co-developed-by: Xiandong Wang <xiandong.wang@mediatek.com>
Signed-off-by: Xiandong Wang <xiandong.wang@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220831172151.10215-3-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
