summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2017-06-04ia64: Remove HAVE_ARCH_COPY_SIGINFOChristoph Hellwig
Since ia64 defines __ARCH_SI_PREAMBLE_SIZE it can just use the generic copy_siginfo implementation, which is identical to the architecture specific one. With that support for HAVE_ARCH_COPY_SIGINFO can go away entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: sparclinux@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170603190102.28866-3-hch@lst.de
2017-06-04genirq: Handle NOAUTOEN interrupt setup properThomas Gleixner
If an interrupt is marked NOAUTOEN then request_irq() installs the action, but does not enable the interrupt via startup_irq(). The interrupt is enabled via enable_irq() later from the driver. enable_irq() calls irq_enable(). That means that for interrupts which have a irq_startup() callback this callback is never invoked. Neither is irq_domain_activate_irq() invoked for such interrupts. If an interrupt depends on irq_startup() or irq_domain_activate_irq() then the enable via irq_enable() is not enough. Add a status flag IRQD_IRQ_STARTED_UP and use this to select the proper mechanism in enable_irq(). Use the flag also to avoid pointless calls into the low level functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: dianders@chromium.org Cc: jeffy <jeffy.chen@rock-chips.com> Cc: Brian Norris <briannorris@chromium.org> Cc: tfiga@chromium.org Link: http://lkml.kernel.org/r/20170531100212.130986205@linutronix.de
2017-06-03iio: inkern: api for manipulating ext_info of iio channelsPeter Rosin
Extend the inkern api with functions for reading and writing ext_info of iio channels. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03mux: minimal mux subsystemPeter Rosin
Add a new minimalistic subsystem that handles multiplexer controllers. When multiplexers are used in various places in the kernel, and the same multiplexer controller can be used for several independent things, there should be one place to implement support for said multiplexer controller. A single multiplexer controller can also be used to control several parallel multiplexers, that are in turn used by different subsystems in the kernel, leading to a need to coordinate multiplexer accesses. The multiplexer subsystem handles this coordination. Thanks go out to Lars-Peter Clausen, Jonathan Cameron, Rob Herring, Wolfram Sang, Paul Gortmaker, Dan Carpenter, Colin Ian King, Greg Kroah-Hartman and last but certainly not least to Philipp Zabel for helpful comments, reviews, patches and general encouragement! Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03arm,arm64,drivers: add a prefix to drivers arch_topology interfacesJuri Lelli
Now that some functions that deal with arch topology information live under drivers, there is a clash of naming that might create confusion. Tidy things up by creating a topology namespace for interfaces used by arch code; achieve this by prepending a 'topology_' prefix to driver interfaces. Signed-off-by: Juri Lelli <juri.lelli@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03arm,arm64,drivers: move externs in a new header fileJuri Lelli
Create a new header file (include/linux/arch_topology.h) and put there declarations of interfaces used by arm, arm64 and drivers code. Signed-off-by: Juri Lelli <juri.lelli@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03usb: typec: Add a sysfs node to manage port typeBadhri Jagan Sridharan
User space applications in some cases have the need to enforce a specific port type(DFP/UFP/DRP). This change allows userspace to attempt setting the desired port type. Low level drivers can however reject the request if the specific port type is not supported. Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-02clk: versatile: delete old RealView clock implementationLinus Walleij
The old RealView clock implementation is not used anymore (nothing in the kernel calls realview_clk_init()) as we have moved all clocks over to device tree. Delete it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02Merge branch 'clk-bulk-get' into clk-nextStephen Boyd
* clk-bulk-get: clk: add managed version of clk_bulk_get clk: add clk_bulk_get accessories
2017-06-02clk: add managed version of clk_bulk_getDong Aisheng
This patch introduces the managed version of clk_bulk_get. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Anson Huang <anson.huang@nxp.com> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Octavian Purdila <octavian.purdila@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02clk: add clk_bulk_get accessoriesDong Aisheng
These helper function allows drivers to get several clk consumers in one operation. If any of the clk cannot be acquired then any clks that were got will be put before returning to the caller. This can relieve the driver owners' life who needs to handle many clocks, as well as each clock error reporting. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Anson Huang <anson.huang@nxp.com> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Octavian Purdila <octavian.purdila@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02mm: consider memblock reservations for deferred memory initialization sizingMichal Hocko
We have seen an early OOM killer invocation on ppc64 systems with crashkernel=4096M: kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0 kthreadd cpuset=/ mems_allowed=7 CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1 Call Trace: dump_stack+0xb0/0xf0 (unreliable) dump_header+0xb0/0x258 out_of_memory+0x5f0/0x640 __alloc_pages_nodemask+0xa8c/0xc80 kmem_getpages+0x84/0x1a0 fallback_alloc+0x2a4/0x320 kmem_cache_alloc_node+0xc0/0x2e0 copy_process.isra.25+0x260/0x1b30 _do_fork+0x94/0x470 kernel_thread+0x48/0x60 kthreadd+0x264/0x330 ret_from_kernel_thread+0x5c/0xa4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 slab_reclaimable:5 slab_unreclaimable:73 mapped:0 shmem:0 pagetables:0 bounce:0 free:0 free_pcp:0 free_cma:0 Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 0 0 0 Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB 0 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 819200 pages RAM 0 pages HighMem/MovableOnly 817481 pages reserved 0 pages cma reserved 0 pages hwpoisoned the reason is that the managed memory is too low (only 110MB) while the rest of the the 50GB is still waiting for the deferred intialization to be done. update_defer_init estimates the initial memoty to initialize to 2GB at least but it doesn't consider any memory allocated in that range. In this particular case we've had Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB) so the low 2GB is mostly depleted. Fix this by considering memblock allocations in the initial static initialization estimation. Move the max_initialise to reset_deferred_meminit and implement a simple memblock_reserved_memory helper which iterates all reserved blocks and sums the size of all that start below the given address. The cumulative size is than added on top of the initial estimation. This is still not ideal because reset_deferred_meminit doesn't consider holes and so reservation might be above the initial estimation whihch we ignore but let's make the logic simpler until we really need to handle more complicated cases. Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-02mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specifiedJames Morse
KVM uses get_user_pages() to resolve its stage2 faults. KVM sets the FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it finds a VM_FAULT_HWPOISON. KVM handles these hwpoison pages as a special case. (check_user_page_hwpoison()) When huge pages are involved, this doesn't work so well. get_user_pages() calls follow_hugetlb_page(), which stops early if it receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning -EFAULT to the caller. The step to map this to -EHWPOISON based on the FOLL_ flags is missing. The hwpoison special case is skipped, and -EFAULT is returned to user-space, causing Qemu or kvmtool to exit. Instead, move this VM_FAULT_ to errno mapping code into a header file and use it from faultin_page() and follow_hugetlb_page(). With this, KVM works as expected. This isn't a problem for arm64 today as we haven't enabled MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86 too, so I think this should be a fix. This doesn't apply earlier than stable's v4.11.1 due to all sorts of cleanup. [james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()] suggested. Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.com Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [4.11.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-02frv: declare jiffies to be located in the .data sectionMatthias Kaehlcke
Commit 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp") removed a section specification from the jiffies declaration that caused conflicts on some platforms. Unfortunately this change broke the build for frv: kernel/built-in.o: In function `__do_softirq': (.text+0x6460): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 kernel/built-in.o: In function `__do_softirq': (.text+0x6574): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 kernel/built-in.o: In function `pwq_activate_delayed_work': workqueue.c:(.text+0x15b9c): relocation truncated to fit: R_FRV_GPREL12 against symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1 ... Add __jiffy_arch_data to the declaration of jiffies and use it on frv to include the section specification. For all other platforms __jiffy_arch_data (currently) has no effect. Fixes: 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp") Link: http://lkml.kernel.org/r/20170516221333.177280-1-mka@chromium.org Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: David Howells <dhowells@redhat.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-02include/linux/gfp.h: fix ___GFP_NOLOCKDEP valueMichal Hocko
Igor Stoppa has noticed that __GFP_NOLOCKDEP can use a lower bit. At the time commit 7e7844226f10 ("lockdep: allow to disable reclaim lockup detection") was written we still had __GFP_OTHER_NODE but I have removed it in commit 41b6167e8f74 ("mm: get rid of __GFP_OTHER_NODE") and forgot to lower the bit value. The current value is outside of __GFP_BITS_SHIFT so it cannot be used actually. Fixes: 7e7844226f10 ("lockdep: allow to disable reclaim lockup detection") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Igor Stoppa <igor.stoppa@nokia.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-02clk: Provide dummy of_clk_get_from_provider() for compile-testingGeert Uytterhoeven
When CONFIG_ON=n, dummies are provided for of_clk_get() and of_clk_get_by_name(), but not for of_clk_get_from_provider(). Provide a dummy for the latter, to improve the ability to do compile-testing. This requires removing the existing dummy in the Lantiq clock code. Fixes: 766e6a4ec602d0c1 ("clk: add DT clock binding support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Thomas Langer <thomas.langer@intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-06-01 This series contains updates to i40e, i40evf and the "new" AVF virtchnl. This is the introduction of the Intel(R) Ethernet Adaptive Virtual Function driver code and device ID, as presented at the NetDEV 1.2 conference in 2016. http://netdevconf.org/1.2/session.html?anjali-singhai The idea is to convert the interface between the i40evf driver and the parent i40e PF driver to be generic, as the i40evf driver should in the future be able to run on top of other Intel PF drivers, and negotiate any features beyond a "base expected" set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Add support for changing iSCSI macMintz, Yuval
Enhance API between qedi and qed, allowing qedi to inform device's firmware when the iSCSI mac is to be changed. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Support NVM-image reading APIMintz, Yuval
Storage drivers require images from the nvram in boot-from-SAN scenarios. This provides the necessary API between qed and the protocol drivers to perform such reads. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Share additional information with qedfMintz, Yuval
Share several new tidbits with qedf: - wwpn & wwnn - Absolute pf-id [this one is actually meant for qedi as well] - Number of available CQs While we're at it, now that qedf will be aware of the available CQs we can add some validation on the inputs it provides. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02team: add macro MODULE_ALIAS_TEAM_MODE for team mode aliasZhang Shengju
Add a new macro MODULE_ALIAS_TEAM_MODE to unify and simplify the declaration of team mode alias. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02usb: gadget: Allow a non-SuperSpeed gadget to support LPMJohn Youn
This commit allows a gadget that does not support SuperSpeed to indicate that it supports LPM. It does this by setting the 'lpm_capable' flag in the gadget structure. If a gadget sets this, the composite gadget framework will set the bcdUSB to 0x0201 to indicate that this supports BOS descriptors, and also return a USB 2.0 Extension descriptor as part of the BOS descriptor set. See USB 2.0 LPM ECN Section 3. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-02drm: omapdrm: Remove unused default display name supportLaurent Pinchart
The default display name is both unused and never set by platform data. Remove default display name module parameter, platform data field and runtime infrastructure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-06-01Merge tag 'nfsd-4.12-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Revert patch accidentally included in the merge window pull request, and fix a crash that was likely a result of buggy client behavior" * tag 'nfsd-4.12-1' of git://linux-nfs.org/~bfields/linux: nfsd4: fix null dereference on replay nfsd: Revert "nfsd: check for oversized NFSv2/v3 arguments"
2017-06-01virtchnl: Add compile time static asserts to validate structure sizesSridhar Samudrala
This uses preprocessor tricks to make sure that a divide by zero occurs if a struct changes size outside the expected number of bytes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01virtchnl: Add pad fields to a couple of structuresSridhar Samudrala
This removes holes and makes structure sizes consistent across 32 and 64 bit builds. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01i40e/virtchnl: move function to virtchnlJesse Brandeburg
This moves a function that is needed for the virtchnl interface from the i40e PF driver over to the virtchnl.h file. It was manually verified that the function in question is unchanged except for the function name and function header, which explains the slight difference in the number of lines removed/added. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01virtchnl: finish conversion to virtchnl interfaceJesse Brandeburg
This patch implements the complete version of the virtchnl.h file with final renames, and fixes the related code in i40e and i40evf. It also expands comments, and adds details on the usage of certain fields. In addition, due to the changes a couple of casts are needed to prevent errors found by sparse after renaming some fields. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01i40evf/virtchnl: whitespace cleanupsJesse Brandeburg
This patch fixes up a bunch of whitespace issues introduced by the previous automated change of name from i40e to virtchnl. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01i40e/virtchnl: refactor code for validate checksJesse Brandeburg
This change updates the arguments passed to the validate function and fixes the caller, as well as uses the new return values added to virtchnl.h One other minor tweak, remove a duplicate set to zero of valid_len. This is in preparation for moving the function to virtchnl.h. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01virtchnl: convert to new macrosJesse Brandeburg
As part of the conversion, change the arguments to VF_IS_V1[01] macros and move them to virtchnl.h Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01virtchnl: rename i40e to generic virtchnlJesse Brandeburg
This morphs all the i40e and i40evf references to/in virtchnl.h to be generic, using only automated methods. Updates all the callers to use the new names. A followup patch provides separate clean ups for messy line conversions from these "automatic" changes, to make them more reviewable. Was executed with the following sed script: sed -i -f transform_script drivers/net/ethernet/intel/i40e/i40e_client.c sed -i -f transform_script drivers/net/ethernet/intel/i40e/i40e_prototype.h sed -i -f transform_script drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c sed -i -f transform_script drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40e_common.c sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40e_prototype.h sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40evf.h sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40evf_client.c sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40evf_main.c sed -i -f transform_script drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c sed -i -f transform_script include/linux/avf/virtchnl.h transform_script: ----8<---- s/I40E_VIRTCHNL_SUPPORTED_QTYPES/SAVE_ME_SUPPORTED_QTYPES/g s/I40E_VIRTCHNL_VF_CAP/SAVE_ME_VF_CAP/g s/I40E_VIRTCHNL_/VIRTCHNL_/g s/i40e_virtchnl_/virtchnl_/g s/i40e_vfr_/virtchnl_vfr_/g s/I40E_VFR_/VIRTCHNL_VFR_/g s/VIRTCHNL_OP_ADD_ETHER_ADDRESS/VIRTCHNL_OP_ADD_ETH_ADDR/g s/VIRTCHNL_OP_DEL_ETHER_ADDRESS/VIRTCHNL_OP_DEL_ETH_ADDR/g s/VIRTCHNL_OP_FCOE/VIRTCHNL_OP_RSVD/g s/SAVE_ME_SUPPORTED_QTYPES/I40E_VIRTCHNL_SUPPORTED_QTYPES/g s/SAVE_ME_VF_CAP/I40E_VIRTCHNL_VF_CAP/g ----8<---- Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01net/mlx5: Define interface bits for fencing UMR wqeMax Gurtovoy
HW can implement UMR wqe re-transmission in various ways. Thus, add HCA cap to distinguish the needed fence for UMR to make sure that the wqe wouldn't fail on mkey checks. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01i40e/i40evf: create and use new unified header fileJesse Brandeburg
This moves a header for i40evf to include/linux/avf/virtchnl.h. The directory name AVF is an acronym for the Intel(R) Adaptive Virtual Function. This first step creates the new file, which is a rename of drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h to include/linux/avf/virtchnl.h, and should show up in git as a rename when using git log --follow. To keep things building after the move, the changes to the i40evf driver are made to point to the new include file location. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-01block: Introduce queue flag QUEUE_FLAG_SCSI_PASSTHROUGHBart Van Assche
From the context where a SCSI command is submitted it is not always possible to figure out whether or not the queue the command is submitted to has struct scsi_request as the first member of its private data. Hence introduce the flag QUEUE_FLAG_SCSI_PASSTHROUGH. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Don Brace <don.brace@microsemi.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-01net-next: stmmac: Add dwmac-sun8iLABBE Corentin
The dwmac-sun8i is a heavy hacked version of stmmac hardware by allwinner. In fact the only common part is the descriptor management and the first register function. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net-next: stmmac: add optional setup functionLABBE Corentin
Instead of adding more ifthen logic for adding a new mac_device_info setup function, it is easier to add a function pointer to the function needed. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Encapsulate interrupt counters in structMintz, Yuval
We already have an API struct that contains interrupt-related numbers. Use it to encapsulate all information relating to the status of SBs as (used|free). Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01of: Support const and non-const use for to_of_node()Sakari Ailus
Turn to_of_node() into a macro in order to support both const and non-const use. Additionally make the fwnode argument to is_of_node() const as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-01of: Make of_fwnode_handle() saferSakari Ailus
On the expense of a little bit more complexity in the of_fwnode_handle() macro, make the macro result in NULL in case its argument is NULL while still referencing it only once. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-01phy: Move ULPI phy header out of drivers to include pathVivek Gautam
Although ULPI phy is currently being used by tusb1210, there can be other consumers too in future. So move this to the includes path for phy. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01hw_random: timeriomem_rng: Allow setting RNG quality from platform dataRick Altherr
When a hw_random device's quality is non-zero, it will automatically be used to fill the kernel's entropy pool. Since timeriomem_rng is used by many different devices, the quality needs to be provided by platform data or device tree. Signed-off-by: Rick Altherr <raltherr@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-05-31dsa: add DSA switch driver for Microchip KSZ9477Woojung Huh
The KSZ9477 is a fully integrated layer 2, managed, 7 ports GigE switch with numerous advanced features. 5 ports incorporate 10/100/1000 Mbps PHYs. The other 2 ports have interfaces that can be configured as SGMII, RGMII, MII or RMII. Either of these may connect directly to a host processor or to an external PHY. The SGMII port may interface to a fiber optic transceiver. This driver currently supports vlan, fdb, mdb & mirror dsa switch operations. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31phy: micrel: add Microchip KSZ 9477 Switch PHY supportWoojung Huh
Adding Microchip 9477 Phy included in KSZ9477 Switch. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31bpf: teach verifier to track stack depthAlexei Starovoitov
teach verifier to track bpf program stack depth Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31bpf: free up BPF_JMP | BPF_CALL | BPF_X opcodeAlexei Starovoitov
free up BPF_JMP | BPF_CALL | BPF_X opcode to be used by actual indirect call by register and use kernel internal opcode to mark call instruction into bpf_tail_call() helper. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31pstore: Populate pstore record->time fieldKees Cook
The current time will be initially available in the record->time field for all pstore_read() and pstore_write() calls. Backends can either update the field during read(), or use the field during write() instead of fetching time themselves. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-05-30PCI: Restore PRI and PASID state after Function-Level ResetCQ Tang
After a Function-Level Reset, PCI states need to be restored. Save PASID features and PRI reqs cached. [bhelgaas: search for capability only if PRI/PASID were enabled] Signed-off-by: CQ Tang <cq.tang@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jean-Phillipe Brucker <jean-philippe.brucker@arm.com> Cc: David Woodhouse <dwmw2@infradead.org>
2017-05-30PCI: Cache PRI and PASID bits in pci_devJean-Philippe Brucker
Device drivers need to check if an IOMMU enabled ATS, PRI and PASID in order to know when they can use the SVM API. Cache PRI and PASID bits in the pci_dev structure, similarly to what is currently done for ATS. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-05-30net: add extack arg to lwtunnel build stateDavid Ahern
Pass extack arg down to lwtunnel_build_state and the build_state callbacks. Add messages for failures in lwtunnel_build_state, and add the extarg to nla_parse where possible in the build_state callbacks. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 10:14:40 +0000