| Age | Commit message (Collapse) | Author |
|---|
|
Switch to a scope-based protection of the objcg pointer on slab/kmem
allocation paths. Instead of using the get_() semantics in the
pre-allocation hook and put the reference afterwards, let's rely on the
fact that objcg is pinned by the scope.
It's possible because:
1) if the objcg is received from the current task struct, the task is
keeping a reference to the objcg.
2) if the objcg is received from an active memcg (remote charging),
the memcg is pinned by the scope and has a reference to the
corresponding objcg.
Link: https://lkml.kernel.org/r/20231019225346.1822282-5-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Keep a reference to the original objcg object for the entire life of a
memcg structure.
This allows to simplify the synchronization on the kernel memory
allocation paths: pinning a (live) memcg will also pin the corresponding
objcg.
The memory overhead of this change is minimal because object cgroups
usually outlive their corresponding memory cgroups even without this
change, so it's only an additional pointer per memcg.
Link: https://lkml.kernel.org/r/20231019225346.1822282-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To charge a freshly allocated kernel object to a memory cgroup, the kernel
needs to obtain an objcg pointer. Currently it does it indirectly by
obtaining the memcg pointer first and then calling to
__get_obj_cgroup_from_memcg().
Usually tasks spend their entire life belonging to the same object cgroup.
So it makes sense to save the objcg pointer on task_struct directly, so
it can be obtained faster. It requires some work on fork, exit and cgroup
migrate paths, but these paths are way colder.
To avoid any costly synchronization the following rules are applied:
1) A task sets it's objcg pointer itself.
2) If a task is being migrated to another cgroup, the least
significant bit of the objcg pointer is set atomically.
3) On the allocation path the objcg pointer is obtained locklessly
using the READ_ONCE() macro and the least significant bit is
checked. If it's set, the following procedure is used to update
it locklessly:
- task->objcg is zeroed using cmpxcg
- new objcg pointer is obtained
- task->objcg is updated using try_cmpxchg
- operation is repeated if try_cmpxcg fails
It guarantees that no updates will be lost if task migration
is racing against objcg pointer update. It also allows to keep
both read and write paths fully lockless.
Because the task is keeping a reference to the objcg, it can't go away
while the task is alive.
This commit doesn't change the way the remote memcg charging works.
Link: https://lkml.kernel.org/r/20231019225346.1822282-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In current PCP auto-tuning design, if the number of pages allocated is
much more than that of pages freed on a CPU, the PCP high may become the
maximal value even if the allocating/freeing depth is small, for example,
in the sender of network workloads. If a CPU was used as sender
originally, then it is used as receiver after context switching, we need
to fill the whole PCP with maximal high before triggering PCP draining for
consecutive high order freeing. This will hurt the performance of some
network workloads.
To solve the issue, in this patch, we will track the consecutive page
freeing with a counter in stead of relying on PCP draining. So, we can
detect consecutive page freeing much earlier.
On a 2-socket Intel server with 128 logical CPU, we tested
SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes.
With the patch, the network bandwidth improves 5.0%. This restores the
performance drop caused by PCP auto-tuning.
Link: https://lkml.kernel.org/r/20231016053002.756205-10-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
One target of PCP is to minimize pages in PCP if the system free pages is
too few. To reach that target, when page reclaiming is active for the
zone (ZONE_RECLAIM_ACTIVE), we will stop increasing PCP high in allocating
path, decrease PCP high and free some pages in freeing path. But this may
be too late because the background page reclaiming may introduce latency
for some workloads. So, in this patch, during page allocation we will
detect whether the number of free pages of the zone is below high
watermark. If so, we will stop increasing PCP high in allocating path,
decrease PCP high and free some pages in freeing path. With this, we can
reduce the possibility of the premature background page reclaiming caused
by too large PCP.
The high watermark checking is done in allocating path to reduce the
overhead in hotter freeing path.
Link: https://lkml.kernel.org/r/20231016053002.756205-9-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The target to tune PCP high automatically is as follows,
- Minimize allocation/freeing from/to shared zone
- Minimize idle pages in PCP
- Minimize pages in PCP if the system free pages is too few
To reach these target, a tuning algorithm as follows is designed,
- When we refill PCP via allocating from the zone, increase PCP high.
Because if we had larger PCP, we could avoid to allocate from the
zone.
- In periodic vmstat updating kworker (via refresh_cpu_vm_stats()),
decrease PCP high to try to free possible idle PCP pages.
- When page reclaiming is active for the zone, stop increasing PCP
high in allocating path, decrease PCP high and free some pages in
freeing path.
So, the PCP high can be tuned to the page allocating/freeing depth of
workloads eventually.
One issue of the algorithm is that if the number of pages allocated is
much more than that of pages freed on a CPU, the PCP high may become the
maximal value even if the allocating/freeing depth is small. But this
isn't a severe issue, because there are no idle pages in this case.
One alternative choice is to increase PCP high when we drain PCP via
trying to free pages to the zone, but don't increase PCP high during PCP
refilling. This can avoid the issue above. But if the number of pages
allocated is much less than that of pages freed on a CPU, there will be
many idle pages in PCP and it is hard to free these idle pages.
1/8 (>> 3) of PCP high will be decreased periodically. The value 1/8 is
kind of arbitrary. Just to make sure that the idle PCP pages will be
freed eventually.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
build time decreases 3.5%. The cycles% of the spinlock contention (mostly
for zone lock) decreases from 11.0% to 0.5%. The number of PCP draining
for high order pages freeing (free_high) decreases 65.6%. The number of
pages allocated from zone (instead of from PCP) decreases 83.9%.
Link: https://lkml.kernel.org/r/20231016053002.756205-8-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Suggested-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The page allocation performance requirements of different workloads are
usually different. So, we need to tune PCP (per-CPU pageset) high to
optimize the workload page allocation performance. Now, we have a system
wide sysctl knob (percpu_pagelist_high_fraction) to tune PCP high by hand.
But, it's hard to find out the best value by hand. And one global
configuration may not work best for the different workloads that run on
the same system. One solution to these issues is to tune PCP high of each
CPU automatically.
This patch adds the framework for PCP high auto-tuning. With it,
pcp->high of each CPU will be changed automatically by tuning algorithm at
runtime. The minimal high (pcp->high_min) is the original PCP high value
calculated based on the low watermark pages. While the maximal high
(pcp->high_max) is the PCP high value when percpu_pagelist_high_fraction
sysctl knob is set to MIN_PERCPU_PAGELIST_HIGH_FRACTION. That is, the
maximal pcp->high that can be set via sysctl knob by hand.
It's possible that PCP high auto-tuning doesn't work well for some
workloads. So, when PCP high is tuned by hand via the sysctl knob, the
auto-tuning will be disabled. The PCP high set by hand will be used
instead.
This patch only adds the framework, so pcp->high will be set to
pcp->high_min (original default) always. We will add actual auto-tuning
algorithm in the following patches in the series.
Link: https://lkml.kernel.org/r/20231016053002.756205-7-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a task is allocating a large number of order-0 pages, it may acquire
the zone->lock multiple times allocating pages in batches. This may
unnecessarily contend on the zone lock when allocating very large number
of pages. This patch adapts the size of the batch based on the recent
pattern to scale the batch size for subsequent allocations.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
cycles% of the spinlock contention (mostly for zone lock) decreases from
12.6% to 11.0% (with PCP size == 367).
Link: https://lkml.kernel.org/r/20231016053002.756205-6-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit f26b3fa04611 ("mm/page_alloc: limit number of high-order pages
on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when
PCP is mostly used for high-order pages freeing to improve the cache-hot
pages reusing between page allocating and freeing CPUs.
On system with small per-CPU data cache slice, pages shouldn't be cached
before draining to guarantee cache-hot. But on a system with large
per-CPU data cache slice, some pages can be cached before draining to
reduce zone lock contention.
So, in this patch, instead of draining without any caching, "pcp->batch"
pages will be cached in PCP before draining if the size of the per-CPU
data cache slice is more than "3 * batch".
In theory, if the size of per-CPU data cache slice is more than "2 *
batch", we can reuse cache-hot pages between CPUs. But considering the
other usage of cache (code, other data accessing, etc.), "3 * batch" is
used.
Note: "3 * batch" is chosen to make sure the optimization works on recent
x86_64 server CPUs. If you want to increase it, please check whether it
breaks the optimization.
On a 2-socket Intel server with 128 logical CPU, with the patch, the
network bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite
with 16-pair processes increase 70.5%. The cycles% of the spinlock
contention (mostly for zone lock) decreases from 46.1% to 21.3%. The
number of PCP draining for high order pages freeing (free_high) decreases
89.9%. The cache miss rate keeps 0.2%.
Link: https://lkml.kernel.org/r/20231016053002.756205-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This can be used to estimate the size of the data cache slice that can be
used by one CPU under ideal circumstances. Both DATA caches and UNIFIED
caches are used in calculation. So, the users need to consider the impact
of the code cache usage.
Because the cache inclusive/non-inclusive information isn't available now,
we just use the size of the per-CPU slice of LLC to make the result more
predictable across architectures. This may be improved when more cache
information is available in the future.
A brute-force algorithm to iterate all online CPUs is used to avoid to
allocate an extra cpumask, especially in offline callback.
Link: https://lkml.kernel.org/r/20231016053002.756205-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: PCP high auto-tuning", v3.
The page allocation performance requirements of different workloads are
often different. So, we need to tune the PCP (Per-CPU Pageset) high on
each CPU automatically to optimize the page allocation performance.
The list of patches in series is as follows,
[1/9] mm, pcp: avoid to drain PCP when process exit
[2/9] cacheinfo: calculate per-CPU data cache size
[3/9] mm, pcp: reduce lock contention for draining high-order pages
[4/9] mm: restrict the pcp batch scale factor to avoid too long latency
[5/9] mm, page_alloc: scale the number of pages that are batch allocated
[6/9] mm: add framework for PCP high auto-tuning
[7/9] mm: tune PCP high automatically
[8/9] mm, pcp: decrease PCP high if free pages < high watermark
[9/9] mm, pcp: reduce detecting time of consecutive high order page freeing
Patch [1/9], [2/9], [3/9] optimize the PCP draining for consecutive
high-order pages freeing.
Patch [4/9], [5/9] optimize batch freeing and allocating.
Patch [6/9], [7/9], [8/9] implement and optimize a PCP high
auto-tuning method.
Patch [9/9] optimize the PCP draining for consecutive high order page
freeing based on PCP high auto-tuning.
The test results for patches with performance impact are as follows,
kbuild
======
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service.
build time lock contend% free_high alloc_zone
---------- ---------- --------- ----------
base 100.0 14.0 100.0 100.0
patch1 99.5 12.8 19.5 95.6
patch3 99.4 12.6 7.1 95.6
patch5 98.6 11.0 8.1 97.1
patch7 95.1 0.5 2.8 15.6
patch9 95.0 1.0 8.8 20.0
The PCP draining optimization (patch [1/9], [3/9]) and PCP batch
allocation optimization (patch [5/9]) reduces zone lock contention a
little. The PCP high auto-tuning (patch [7/9], [9/9]) reduces build time
visibly. Where the tuning target: the number of pages allocated from zone
reduces greatly. So, the zone contention cycles% reduces greatly.
With PCP tuning patches (patch [7/9], [9/9]), the average used memory
during test increases up to 18.4% because more pages are cached in PCP.
But at the end of the test, the number of the used memory decreases to the
same level as that of the base patch. That is, the pages cached in PCP
will be released to zone after not being used actively.
netperf SCTP_STREAM_MANY
========================
On a 2-socket Intel server with 128 logical CPU, we tested
SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes.
score lock contend% free_high alloc_zone cache miss rate%
----- ---------- --------- ---------- ----------------
base 100.0 2.1 100.0 100.0 1.3
patch1 99.4 2.1 99.4 99.4 1.3
patch3 106.4 1.3 13.3 106.3 1.3
patch5 106.0 1.2 13.2 105.9 1.3
patch7 103.4 1.9 6.7 90.3 7.6
patch9 108.6 1.3 13.7 108.6 1.3
The PCP draining optimization (patch [1/9]+[3/9]) improves performance.
The PCP high auto-tuning (patch [7/9]) reduces performance a little
because PCP draining cannot be triggered in time sometimes. So, the cache
miss rate% increases. The further PCP draining optimization (patch [9/9])
based on PCP tuning restore the performance.
lmbench3 UNIX (AF_UNIX)
=======================
On a 2-socket Intel server with 128 logical CPU, we tested UNIX
(AF_UNIX socket) test case of lmbench3 test suite with 16-pair
processes.
score lock contend% free_high alloc_zone cache miss rate%
----- ---------- --------- ---------- ----------------
base 100.0 51.4 100.0 100.0 0.2
patch1 116.8 46.1 69.5 104.3 0.2
patch3 199.1 21.3 7.0 104.9 0.2
patch5 200.0 20.8 7.1 106.9 0.3
patch7 191.6 19.9 6.8 103.8 2.8
patch9 193.4 21.7 7.0 104.7 2.1
The PCP draining optimization (patch [1/9], [3/9]) improves performance
much. The PCP tuning (patch [7/9]) reduces performance a little because
PCP draining cannot be triggered in time sometimes. The further PCP
draining optimization (patch [9/9]) based on PCP tuning restores the
performance partly.
The patchset adds several fields in struct per_cpu_pages. The struct
layout before/after the patchset is as follows,
base
====
struct per_cpu_pages {
spinlock_t lock; /* 0 4 */
int count; /* 4 4 */
int high; /* 8 4 */
int batch; /* 12 4 */
short int free_factor; /* 16 2 */
short int expire; /* 18 2 */
/* XXX 4 bytes hole, try to pack */
struct list_head lists[13]; /* 24 208 */
/* size: 256, cachelines: 4, members: 7 */
/* sum members: 228, holes: 1, sum holes: 4 */
/* padding: 24 */
} __attribute__((__aligned__(64)));
patched
=======
struct per_cpu_pages {
spinlock_t lock; /* 0 4 */
int count; /* 4 4 */
int high; /* 8 4 */
int high_min; /* 12 4 */
int high_max; /* 16 4 */
int batch; /* 20 4 */
u8 flags; /* 24 1 */
u8 alloc_factor; /* 25 1 */
u8 expire; /* 26 1 */
/* XXX 1 byte hole, try to pack */
short int free_count; /* 28 2 */
/* XXX 2 bytes hole, try to pack */
struct list_head lists[13]; /* 32 208 */
/* size: 256, cachelines: 4, members: 11 */
/* sum members: 237, holes: 2, sum holes: 3 */
/* padding: 16 */
} __attribute__((__aligned__(64)));
The size of the struct doesn't changed with the patchset.
This patch (of 9):
In commit f26b3fa04611 ("mm/page_alloc: limit number of high-order pages
on PCP during bulk free"), the PCP (Per-CPU Pageset) will be drained when
PCP is mostly used for high-order pages freeing to improve the cache-hot
pages reusing between page allocation and freeing CPUs.
But, the PCP draining mechanism may be triggered unexpectedly when process
exits. With some customized trace point, it was found that PCP draining
(free_high == true) was triggered with the order-1 page freeing with the
following call stack,
=> free_unref_page_commit
=> free_unref_page
=> __mmdrop
=> exit_mm
=> do_exit
=> do_group_exit
=> __x64_sys_exit_group
=> do_syscall_64
Checking the source code, this is the page table PGD freeing
(mm_free_pgd()). It's a order-1 page freeing if
CONFIG_PAGE_TABLE_ISOLATION=y. Which is a common configuration for
security.
Just before that, page freeing with the following call stack was found,
=> free_unref_page_commit
=> free_unref_page_list
=> release_pages
=> tlb_batch_pages_flush
=> tlb_finish_mmu
=> exit_mmap
=> __mmput
=> exit_mm
=> do_exit
=> do_group_exit
=> __x64_sys_exit_group
=> do_syscall_64
So, when a process exits,
- a large number of user pages of the process will be freed without
page allocation, it's highly possible that pcp->free_factor becomes >
0. In fact, this is expected behavior to improve process exit
performance.
- after freeing all user pages, the PGD will be freed, which is a
order-1 page freeing, PCP will be drained.
All in all, when a process exits, it's high possible that the PCP will be
drained. This is an unexpected behavior.
To avoid this, in the patch, the PCP draining will only be triggered for 2
consecutive high-order page freeing.
On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances
in parallel (each with `make -j 28`) in 8 cgroup. This simulates the
kbuild server that is used by 0-Day kbuild service. With the patch, the
cycles% of the spinlock contention (mostly for zone lock) decreases from
14.0% to 12.8% (with PCP size == 367). The number of PCP draining for
high order pages freeing (free_high) decreases 80.5%.
This helps network workload too for reduced zone lock contention. On a
2-socket Intel server with 128 logical CPU, with the patch, the network
bandwidth of the UNIX (AF_UNIX) test case of lmbench test suite with
16-pair processes increase 16.8%. The cycles% of the spinlock contention
(mostly for zone lock) decreases from 51.4% to 46.1%. The number of PCP
draining for high order pages freeing (free_high) decreases 30.5%. The
cache miss rate keeps 0.2%.
Link: https://lkml.kernel.org/r/20231016053002.756205-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20231016053002.756205-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With all users converted, remove the old create_empty_buffers() and rename
folio_create_empty_buffers() to create_empty_buffers().
Link: https://lkml.kernel.org/r/20231016201114.1928083-28-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extract this useful helper from nilfs_page_get_nth_block()
Link: https://lkml.kernel.org/r/20231016201114.1928083-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Finish the create_empty_buffers() transition", v2.
Pankaj recently added folio_create_empty_buffers() as the folio equivalent
to create_empty_buffers(). This patch set finishes the conversion by
first converting all remaining filesystems to call
folio_create_empty_buffers(), then renaming it back to
create_empty_buffers(). I took the opportunity to make a few
simplifications like making folio_create_empty_buffers() return the head
buffer and extracting get_nth_bh() from nilfs2.
A few of the patches in this series aren't directly related to
create_empty_buffers(), but I saw them while I was working on this and
thought they'd be easy enough to add to this series. Compile-tested only,
other than ext4.
This patch (of 26):
Almost all callers want to know the first BH that was allocated for this
folio. We already have that handy, so return it.
Link: https://lkml.kernel.org/r/20231016201114.1928083-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231016201114.1928083-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.7
The Qualcomm SMC an QSEECOM drivers are moved into a "qcom"
subdirectory, to declutter the base directory. Missing include guards
are added to the qseecom header file. Unneded extern specifiers are
removed from the scm call wrappers.
__counted_by is added to the apr_rx_buf structure, in the APR driver.
Lastly in the pmic_glink driver the pmic_glink drm_bridge type is
corrected to DisplayPort, over the incorrect "USB" value. The return
values are added to error prints for the various typec set() calls.
* tag 'qcom-drivers-for-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
firmware: qcom: qseecom: add missing include guards
Link: https://lore.kernel.org/r/20231025201109.1016121-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Today we got a report at [1] for rcu stalls on the i915 testsuite in [2]
due to the conversion of files to SLAB_TYPSSAFE_BY_RCU. Afaict,
get_file_rcu() goes into an infinite loop trying to carefully verify
that i915->gem.mmap_singleton hasn't changed - see the splat below.
So I stared at this code to figure out what it actually does. It seems
that the i915->gem.mmap_singleton pointer itself never had rcu semantics.
The i915->gem.mmap_singleton is replaced in
file->f_op->release::singleton_release():
static int singleton_release(struct inode *inode, struct file *file)
{
struct drm_i915_private *i915 = file->private_data;
cmpxchg(&i915->gem.mmap_singleton, file, NULL);
drm_dev_put(&i915->drm);
return 0;
}
The cmpxchg() is ordered against a concurrent update of
i915->gem.mmap_singleton from mmap_singleton(). IOW, when
mmap_singleton() fails to get a reference on i915->gem.mmap_singleton:
While mmap_singleton() does
rcu_read_lock();
file = get_file_rcu(&i915->gem.mmap_singleton);
rcu_read_unlock();
it allocates a new file via anon_inode_getfile() and does
smp_store_mb(i915->gem.mmap_singleton, file);
So, then what happens in the case of this bug is that at some point
fput() is called and drops the file->f_count to zero leaving the pointer
in i915->gem.mmap_singleton in tact.
Now, there might be delays until
file->f_op->release::singleton_release() is called and
i915->gem.mmap_singleton is set to NULL.
Say concurrently another task hits mmap_singleton() and does:
rcu_read_lock();
file = get_file_rcu(&i915->gem.mmap_singleton);
rcu_read_unlock();
When get_file_rcu() fails to get a reference via atomic_inc_not_zero()
it will try the reload from i915->gem.mmap_singleton expecting it to be
NULL, assuming it has comparable semantics as we expect in
__fget_files_rcu().
But it hasn't so it reloads the same pointer again, trying the same
atomic_inc_not_zero() again and doing so until
file->f_op->release::singleton_release() of the old file has been
called.
So, in contrast to __fget_files_rcu() here we want to not retry when
atomic_inc_not_zero() has failed. We only want to retry in case we
managed to get a reference but the pointer did change on reload.
<3> [511.395679] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
<3> [511.395716] rcu: Tasks blocked on level-1 rcu_node (CPUs 0-9): P6238
<3> [511.395934] rcu: (detected by 16, t=65002 jiffies, g=123977, q=439 ncpus=20)
<6> [511.395944] task:i915_selftest state:R running task stack:10568 pid:6238 tgid:6238 ppid:1001 flags:0x00004002
<6> [511.395962] Call Trace:
<6> [511.395966] <TASK>
<6> [511.395974] ? __schedule+0x3a8/0xd70
<6> [511.395995] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
<6> [511.396003] ? lockdep_hardirqs_on+0xc3/0x140
<6> [511.396013] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
<6> [511.396029] ? get_file_rcu+0x10/0x30
<6> [511.396039] ? get_file_rcu+0x10/0x30
<6> [511.396046] ? i915_gem_object_mmap+0xbc/0x450 [i915]
<6> [511.396509] ? i915_gem_mmap+0x272/0x480 [i915]
<6> [511.396903] ? mmap_region+0x253/0xb60
<6> [511.396925] ? do_mmap+0x334/0x5c0
<6> [511.396939] ? vm_mmap_pgoff+0x9f/0x1c0
<6> [511.396949] ? rcu_is_watching+0x11/0x50
<6> [511.396962] ? igt_mmap_offset+0xfc/0x110 [i915]
<6> [511.397376] ? __igt_mmap+0xb3/0x570 [i915]
<6> [511.397762] ? igt_mmap+0x11e/0x150 [i915]
<6> [511.398139] ? __trace_bprintk+0x76/0x90
<6> [511.398156] ? __i915_subtests+0xbf/0x240 [i915]
<6> [511.398586] ? __pfx___i915_live_setup+0x10/0x10 [i915]
<6> [511.399001] ? __pfx___i915_live_teardown+0x10/0x10 [i915]
<6> [511.399433] ? __run_selftests+0xbc/0x1a0 [i915]
<6> [511.399875] ? i915_live_selftests+0x4b/0x90 [i915]
<6> [511.400308] ? i915_pci_probe+0x106/0x200 [i915]
<6> [511.400692] ? pci_device_probe+0x95/0x120
<6> [511.400704] ? really_probe+0x164/0x3c0
<6> [511.400715] ? __pfx___driver_attach+0x10/0x10
<6> [511.400722] ? __driver_probe_device+0x73/0x160
<6> [511.400731] ? driver_probe_device+0x19/0xa0
<6> [511.400741] ? __driver_attach+0xb6/0x180
<6> [511.400749] ? __pfx___driver_attach+0x10/0x10
<6> [511.400756] ? bus_for_each_dev+0x77/0xd0
<6> [511.400770] ? bus_add_driver+0x114/0x210
<6> [511.400781] ? driver_register+0x5b/0x110
<6> [511.400791] ? i915_init+0x23/0xc0 [i915]
<6> [511.401153] ? __pfx_i915_init+0x10/0x10 [i915]
<6> [511.401503] ? do_one_initcall+0x57/0x270
<6> [511.401515] ? rcu_is_watching+0x11/0x50
<6> [511.401521] ? kmalloc_trace+0xa3/0xb0
<6> [511.401532] ? do_init_module+0x5f/0x210
<6> [511.401544] ? load_module+0x1d00/0x1f60
<6> [511.401581] ? init_module_from_file+0x86/0xd0
<6> [511.401590] ? init_module_from_file+0x86/0xd0
<6> [511.401613] ? idempotent_init_module+0x17c/0x230
<6> [511.401639] ? __x64_sys_finit_module+0x56/0xb0
<6> [511.401650] ? do_syscall_64+0x3c/0x90
<6> [511.401659] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
<6> [511.401684] </TASK>
Link: [1]: https://lore.kernel.org/intel-gfx/SJ1PR11MB6129CB39EED831784C331BAFB9DEA@SJ1PR11MB6129.namprd11.prod.outlook.com
Link: [2]: https://intel-gfx-ci.01.org/tree/linux-next/next-20231013/bat-dg2-11/igt@i915_selftest@live@mman.html#dmesg-warnings10963
Cc: Jann Horn <jannh@google.com>,
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231025-formfrage-watscheln-84526cd3bd7d@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is the folio equivalent of unmap_and_put_page(), which remains as
a wrapper for it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230921200746.3303942-1-willy@infradead.org>
|
|
Allow HID drivers to pass ->suspend, ->resume and ->reset_resume via
pm_ptr().
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
The only overhead in the final kernel image and at runtime are a few
extra bytes in 'struct hid_driver'.
The same approach is chosen by 'struct usb_driver' and other subsystems.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-1-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The superhyway bus driver was only referenced on SH4-202, which is now gone,
so remove it all as well.
I could find no trace of anything ever calling superhyway_register_driver(),
not in the git history but also not on the web, so I assume this has never
served any purpose on mainline kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230914155523.3839811-3-arnd@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP (operating performance points) updates for 6.7 from Viresh
Kumar:
"- Extend support for the opp-level beyond required-opps (Ulf Hansson).
- Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru).
- dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait
SoCs and document named opp-microvolt property (Bjorn Andersson,
Dmitry Baryshkov and Christian Marangi).
- Fix -Wunsequenced warning (Nathan Chancellor).
- General cleanup (Viresh Kumar)."
* tag 'opp-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
OPP: No need to defer probe from _opp_attach_genpd()
OPP: Remove genpd_virt_dev_lock
OPP: Reorder code in _opp_set_required_opps_genpd()
OPP: Add _link_required_opps() to avoid code duplication
OPP: Fix formatting of if/else block
dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
OPP: Fix -Wunsequenced in _of_add_opp_table_v1()
dt-bindings: opp: opp-v2-kryo-cpu: Allow opp-peak-kBps
OPP: debugfs: Fix warning with W=1 builds
OPP: Remove doc style comments for internal routines
OPP: Add dev_pm_opp_find_level_floor()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct crash_mem.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: kexec@lists.infradead.org
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20230922175224.work.712-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Three more fixes:
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
* tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
====================
Link: https://lore.kernel.org/r/20231024103540.19198-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
|
|
Introduce acpi_dev_uid_match() helper that matches the device with
supplied _UID string.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Suzuki noticed that KVM's PMU emulation is oblivious to the NSU and NSK
event filter bits. On systems that have EL3 these bits modify the
filter behavior in non-secure EL0 and EL1, respectively. Even though the
kernel doesn't use these bits, it is entirely possible some other guest
OS does. Additionally, it would appear that these and the M bit are
required by the architecture if EL3 is implemented.
Allow the EL3 event filter bits to be set if EL3 is advertised in the
guest's ID register. Implement the behavior of NSU and NSK according to
the pseudocode, and entirely ignore the M bit for perf event creation.
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231019185618.3442949-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The logic of whether filesystem can encode/decode file handles is open
coded in many places.
In preparation to changing the logic, move the open coded logic into
inline helpers.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add to iommu domain operations a set of callbacks to perform dirty
tracking, particulary to start and stop tracking and to read and clear the
dirty data.
Drivers are generally expected to dynamically change its translation
structures to toggle the tracking and flush some form of control state
structure that stands in the IOVA translation path. Though it's not
mandatory, as drivers can also enable dirty tracking at boot, and just
clear the dirty bits before setting dirty tracking. For each of the newly
added IOMMU core APIs:
iommu_cap::IOMMU_CAP_DIRTY_TRACKING: new device iommu_capable value when
probing for capabilities of the device.
.set_dirty_tracking(): an iommu driver is expected to change its
translation structures and enable dirty tracking for the devices in the
iommu_domain. For drivers making dirty tracking always-enabled, it should
just return 0.
.read_and_clear_dirty(): an iommu driver is expected to walk the pagetables
for the iova range passed in and use iommu_dirty_bitmap_record() to record
dirty info per IOVA. When detecting that a given IOVA is dirty it should
also clear its dirty state from the PTE, *unless* the flag
IOMMU_DIRTY_NO_CLEAR is passed in -- flushing is steered from the caller of
the domain_op via iotlb_gather. The iommu core APIs use the same data
structure in use for dirty tracking for VFIO device dirty (struct
iova_bitmap) abstracted by iommu_dirty_bitmap_record() helper function.
domain::dirty_ops: IOMMU domains will store the dirty ops depending on
whether the iommu device supports dirty tracking or not. iommu drivers can
then use this field to figure if the dirty tracking is supported+enforced
on attach. The enforcement is enable via domain_alloc_user() which is done
via IOMMUFD hwpt flag introduced later.
Link: https://lore.kernel.org/r/20231024135109.73787-5-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Both VFIO and IOMMUFD will need iova bitmap for storing dirties and walking
the user bitmaps, so move to the common dependency into IOMMUFD. In doing
so, create the symbol IOMMUFD_DRIVER which designates the builtin code that
will be used by drivers when selected. Today this means MLX5_VFIO_PCI and
PDS_VFIO_PCI. IOMMU drivers will do the same (in future patches) when
supporting dirty tracking and select IOMMUFD_DRIVER accordingly.
Given that the symbol maybe be disabled, add header definitions in
iova_bitmap.h for when IOMMUFD_DRIVER=n
Link: https://lore.kernel.org/r/20231024135109.73787-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ACPI, irqchip and the architecture code all inspect the MADT
enabled bit for a GICC entry in the MADT.
The addition of an 'online capable' bit means all these sites need
updating.
Move the current checks behind a helper to make future updates easier.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/E1quv5D-00AeNJ-U8@rmk-PC.armlinux.org.uk
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
SIS_UTIL seems to work well, lets remove the old thing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20231020134337.GD33965@noisy.programming.kicks-ass.net
|
|
Add cpus_share_resources() API. This is the preparation for the
optimization of select_idle_cpu() on platforms with cluster scheduler
level.
On a machine with clusters cpus_share_resources() will test whether
two cpus are within the same cluster. On a non-cluster machine it
will behaves the same as cpus_share_cache(). So we use "resources"
here for cache resources.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-and-reviewed-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20231019033323.54147-2-yangyicong@huawei.com
|
|
It turns out that .branches > 0 in is_state_visited() is not a
sufficient condition to identify if two verifier states form a loop
when iterators convergence is computed. This commit adds logic to
distinguish situations like below:
(I) initial (II) initial
| |
V V
.---------> hdr ..
| | |
| V V
| .------... .------..
| | | | |
| V V V V
| ... ... .-> hdr ..
| | | | | |
| V V | V V
| succ <- cur | succ <- cur
| | | |
| V | V
| ... | ...
| | | |
'----' '----'
For both (I) and (II) successor 'succ' of the current state 'cur' was
previously explored and has branches count at 0. However, loop entry
'hdr' corresponding to 'succ' might be a part of current DFS path.
If that is the case 'succ' and 'cur' are members of the same loop
and have to be compared exactly.
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convergence for open coded iterators is computed in is_state_visited()
by examining states with branches count > 1 and using states_equal().
states_equal() computes sub-state relation using read and precision marks.
Read and precision marks are propagated from children states,
thus are not guaranteed to be complete inside a loop when branches
count > 1. This could be demonstrated using the following unsafe program:
1. r7 = -16
2. r6 = bpf_get_prandom_u32()
3. while (bpf_iter_num_next(&fp[-8])) {
4. if (r6 != 42) {
5. r7 = -32
6. r6 = bpf_get_prandom_u32()
7. continue
8. }
9. r0 = r10
10. r0 += r7
11. r8 = *(u64 *)(r0 + 0)
12. r6 = bpf_get_prandom_u32()
13. }
Here verifier would first visit path 1-3, create a checkpoint at 3
with r7=-16, continue to 4-7,3 with r7=-32.
Because instructions at 9-12 had not been visitied yet existing
checkpoint at 3 does not have read or precision mark for r7.
Thus states_equal() would return true and verifier would discard
current state, thus unsafe memory access at 11 would not be caught.
This commit fixes this loophole by introducing exact state comparisons
for iterator convergence logic:
- registers are compared using regs_exact() regardless of read or
precision marks;
- stack slots have to have identical type.
Unfortunately, this is too strict even for simple programs like below:
i = 0;
while(iter_next(&it))
i++;
At each iteration step i++ would produce a new distinct state and
eventually instruction processing limit would be reached.
To avoid such behavior speculatively forget (widen) range for
imprecise scalar registers, if those registers were not precise at the
end of the previous iteration and do not match exactly.
This a conservative heuristic that allows to verify wide range of
programs, however it precludes verification of programs that conjure
an imprecise value on the first loop iteration and use it as precise
on the second.
Test case iter_task_vma_for_each() presents one of such cases:
unsigned int seen = 0;
...
bpf_for_each(task_vma, vma, task, 0) {
if (seen >= 1000)
break;
...
seen++;
}
Here clang generates the following code:
<LBB0_4>:
24: r8 = r6 ; stash current value of
... body ... 'seen'
29: r1 = r10
30: r1 += -0x8
31: call bpf_iter_task_vma_next
32: r6 += 0x1 ; seen++;
33: if r0 == 0x0 goto +0x2 <LBB0_6> ; exit on next() == NULL
34: r7 += 0x10
35: if r8 < 0x3e7 goto -0xc <LBB0_4> ; loop on seen < 1000
<LBB0_6>:
... exit ...
Note that counter in r6 is copied to r8 and then incremented,
conditional jump is done using r8. Because of this precision mark for
r6 lags one state behind of precision mark on r8 and widening logic
kicks in.
Adding barrier_var(seen) after conditional is sufficient to force
clang use the same register for both counting and conditional jump.
This issue was discussed in the thread [1] which was started by
Andrew Werner <awerner32@gmail.com> demonstrating a similar bug
in callback functions handling. The callbacks would be addressed
in a followup patch.
[1] https://lore.kernel.org/bpf/97a90da09404c65c8e810cf83c94ac703705dc0e.camel@gmail.com/
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm into drm-next
vmemdup-user-array API and changes with it.
This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024010905.646830-1-airlied@redhat.com
|
|
Get fixes needed so we can enable build of ams-delta in more
configurations.
|
|
Add a EDAC driver for the RAS capabilities on the Xilinx integrated DDR
Memory Controllers (DDRMCs) which support both DDR4 and LPDDR4/4X memory
interfaces. It has four programmable Network-on-Chip (NoC) interface
ports and is designed to handle multiple streams of traffic. The driver
reports correctable and uncorrectable errors, and also creates debugfs
entries for testing through error injection.
[ bp:
- Add a pointer to the documentation about the register unlock code.
- Squash in a fix for a Smatch static checker issue as reported by
Dan Carpenter:
https://lore.kernel.org/r/a4db6f93-8e5f-4d55-a7b8-b5a987d48a58@moroto.mountain
]
Co-developed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231005101242.14621-3-shubhrajyoti.datta@amd.com
|
|
'rcu/tasks' and 'rcu/stall' into rcu/next
rcu/torture: RCU torture, locktorture and generic torture infrastructure
rcu/fixes: Generic and misc fixes
rcu/docs: RCU documentation updates
rcu/refscale: RCU reference scalability test updates
rcu/tasks: RCU tasks updates
rcu/stall: Stall detection updates
|
|
Not all public action frames have a protected variant. When MFP is
enabled drop only public action frames that have a dual protected
variant.
Fixes: 76a3059cf124 ("wifi: mac80211: drop some unprotected action frames")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove unused 'hdr_size' argument of 'ieee80211_get_tdls_action()'
and adjust 'ieee80211_report_used_skb()' accordingly.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231004153032.206134-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pick up recent sched/urgent fixes merged upstream.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Back in 2015, Van Jacobson suggested to use usec resolution in TCP TS values.
This has been implemented in our private kernels.
Goals were :
1) better observability of delays in networking stacks.
2) better disambiguation of events based on TSval/ecr values.
3) building block for congestion control modules needing usec resolution.
Back then we implemented a schem based on private SYN options
to negotiate the feature.
For upstream submission, we chose to use a route attribute,
because this feature is probably going to be used in private
networks [1] [2].
ip route add 10/8 ... features tcp_usec_ts
Note that RFC 7323 recommends a
"timestamp clock frequency in the range 1 ms to 1 sec per tick.",
but also mentions
"the maximum acceptable clock frequency is one tick every 59 ns."
[1] Unfortunately RFC 7323 5.5 (Outdated Timestamps) suggests
to invalidate TS.Recent values after a flow was idle for more
than 24 days. This is the part making usec_ts a problem
for peers following this recommendation for long living
idle flows.
[2] Attempts to standardize usec ts went nowhere:
https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf
https://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This new dst feature flag will be used to allow TCP to use usec
based timestamps instead of msec ones.
ip route .... feature tcp_usec_ts
Also document that RTAX_FEATURE_SACK and RTAX_FEATURE_TIMESTAMP
are unused.
RTAX_FEATURE_ALLFRAG is also going away soon.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
When support for snapshots was merged, export operations weren't
updated yet. This patch adds new filehandle types for bcachefs that
include the subvolume ID and updates export operations for subvolumes -
and also .get_parent, support for which was added just prior to
snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fix from Ingo Molnar:
"Fix group event semantics"
* tag 'perf-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Disallow mis-matched inherited group reads
|
|
Binding for fixed NVMEM cells defined directly as NVMEM device subnodes
has been deprecated. It has been replaced by the "fixed-layout" NVMEM
layout binding.
New syntax is meant to be clearer and should help avoiding imprecise
bindings.
NVMEM subsystem already supports the new binding. It should be a good
idea to limit support for old syntax to existing drivers that actually
support & use it (we can't break backward compatibility!). That way we
additionally encourage new bindings & drivers to ignore deprecated
binding.
It wasn't clear (to me) if rtc and w1 code actually uses old syntax
fixed cells. I enabled them to don't risk any breakage.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[for meson-{efuse,mx-efuse}.c]
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[for mtk-efuse.c, nvmem/core.c, nvmem-provider.h]
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[MT8192, MT8195 Chromebooks]
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[for microchip-otpc.c]
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[SAMA7G5-EK]
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231020105545.216052-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag to modify the vbus_active
parameter to active in case the ChipIdea USB IP role is device-only and
there is no otgsc register.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231017195903.1665260-2-tmaimon77@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
VC04 has now a independent bus vchiq_bus to register its devices.
However, the module auto-loading for bcm2835-audio and bcm2835-camera
currently happens through MODULE_ALIAS() macro specified explicitly.
The correct way to auto-load a module, is when the alias is picked
out from MODULE_DEVICE_TABLE(). In order to get there, we need to
introduce vchiq_device_id and add relevant entries in file2alias.c
infrastructure so that aliases can be generated. This patch targets
adding vchiq_device_id and do_vchiq_entry, in order to
generate those alias using the /script/mod/file2alias.c.
Going forward the MODULE_ALIAS() from bcm2835-camera and bcm2835-audio
will be dropped, in favour of MODULE_DEVICE_TABLE being used there.
The alias format for vchiq_bus devices will be "vchiq:<dev_name>".
Adjust the vchiq_bus_uevent() to reflect that.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20231019090128.430297-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The following warning was reported when running "./test_progs -t
test_bpf_ma/percpu_free_through_map_free":
------------[ cut here ]------------
WARNING: CPU: 1 PID: 68 at kernel/bpf/memalloc.c:342
CPU: 1 PID: 68 Comm: kworker/u16:2 Not tainted 6.6.0-rc2+ #222
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:bpf_mem_refill+0x21c/0x2a0
......
Call Trace:
<IRQ>
? bpf_mem_refill+0x21c/0x2a0
irq_work_single+0x27/0x70
irq_work_run_list+0x2a/0x40
irq_work_run+0x18/0x40
__sysvec_irq_work+0x1c/0xc0
sysvec_irq_work+0x73/0x90
</IRQ>
<TASK>
asm_sysvec_irq_work+0x1b/0x20
RIP: 0010:unit_free+0x50/0x80
......
bpf_mem_free+0x46/0x60
__bpf_obj_drop_impl+0x40/0x90
bpf_obj_free_fields+0x17d/0x1a0
array_map_free+0x6b/0x170
bpf_map_free_deferred+0x54/0xa0
process_scheduled_works+0xba/0x370
worker_thread+0x16d/0x2e0
kthread+0x105/0x140
ret_from_fork+0x39/0x60
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
The reason is simple: __bpf_obj_drop_impl() does not know the freeing
field is a per-cpu pointer and it uses bpf_global_ma to free the
pointer. Because bpf_global_ma is not a per-cpu allocator, so ksize() is
used to select the corresponding cache. The bpf_mem_cache with 16-bytes
unit_size will always be selected to do the unmatched free and it will
trigger the warning in free_bulk() eventually.
Because per-cpu kptr doesn't support list or rb-tree now, so fix the
problem by only checking whether or not the type of kptr is per-cpu in
bpf_obj_free_fields(), and using bpf_global_percpu_ma to these kptrs.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
