| Age | Commit message (Collapse) | Author |
|---|
|
So far s390 does not allow mmap() of PCI resources to user-space via the
usual mechanisms, though it does use it for RDMA. For the PCI sysfs
resource files and /proc/bus/pci it defines neither HAVE_PCI_MMAP nor
ARCH_GENERIC_PCI_MMAP_RESOURCE. For vfio-pci s390 previously relied on
disabled VFIO_PCI_MMAP and now relies on setting pdev->non_mappable_bars
for all devices.
This is partly because access to mapped PCI resources from user-space
requires special PCI load/store memory-I/O (MIO) instructions, or the
special MMIO syscalls when these are not available. Still, such access is
possible and useful not just for RDMA, in fact not being able to mmap() PCI
resources has previously caused extra work when testing devices.
One thing that doesn't work with PCI resources mapped to user-space though
is the s390 specific virtual ISM device. Not only because the BAR size of
256 TiB prevents mapping the whole BAR but also because access requires use
of the legacy PCI instructions which are not accessible to user-space on
systems with the newer MIO PCI instructions.
Now with the pdev->non_mappable_bars flag ISM can be excluded from mapping
its resources while making this functionality available for all other PCI
devices. To this end introduce a minimal implementation of PCI_QUIRKS and
use that to set pdev->non_mappable_bars for ISM devices only. Then also set
ARCH_GENERIC_PCI_MMAP_RESOURCE to take advantage of the generic
implementation of pci_mmap_resource_range() enabling only the newer sysfs
mmap() interface. This follows the recommendation in
Documentation/PCI/sysfs-pci.rst.
Link: https://lore.kernel.org/r/20250226-vfio_pci_mmap-v7-3-c5c0f1d26efd@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The ability to map PCI resources to user-space is controlled by global
defines. For vfio there is VFIO_PCI_MMAP which is only disabled on s390 and
controls mapping of PCI resources using vfio-pci with a fallback option via
the pread()/pwrite() interface.
For the PCI core there is ARCH_GENERIC_PCI_MMAP_RESOURCE which enables a
generic implementation for mapping PCI resources plus the newer sysfs
interface. Then there is HAVE_PCI_MMAP which can be used with custom
definitions of pci_mmap_resource_range() and the historical /proc/bus/pci
interface. Both mechanisms are all or nothing.
For s390 mapping PCI resources is possible and useful for testing and
certain applications such as QEMU's vfio-pci based user-space NVMe driver.
For certain devices, however access to PCI resources via mappings to
user-space is not possible and these must be excluded from the general PCI
resource mapping mechanisms.
Introduce pdev->non_mappable_bars to indicate that a PCI device's BARs can
not be accessed via mappings to user-space. In the future this enables
per-device restrictions of PCI resource mapping.
For now, set this flag for all PCI devices on s390 in line with the
existing, general disable of PCI resource mapping. As s390 is the only user
of the VFI_PCI_MMAP Kconfig options this can already be replaced with a
check of this new flag. Also add similar checks in the other code protected
by HAVE_PCI_MMAP respectively ARCH_GENERIC_PCI_MMAP in preparation for
enabling these for supported devices.
Link: https://lore.kernel.org/lkml/20250212132808.08dcf03c.alex.williamson@redhat.com/
Link: https://lore.kernel.org/r/20250226-vfio_pci_mmap-v7-2-c5c0f1d26efd@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
io_uring_cmd_import_fixed_vec() is a cmd helper around vectored
registered buffer import functions, which caches the memory under
the hood. The lifetime of the vectore and hence the iterator is bound to
the request. Furthermore, the user is not allowed to call it multiple
times for a single request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/97487a80dec3fb8cf8aeedf1f9026ef6d503fe4b.1742579999.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Propagate the NFS_MOUNT_NETUNREACH_FATAL flag to work with the pNFS
flexfiles client. In these circumstances, the client needs to treat the
ENETDOWN and ENETUNREACH errors as fatal, and should abandon the
attempted I/O.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Propagate the NFS_MOUNT_NETUNREACH_FATAL flag to work with the generic
NFS client. If the flag is set, the client will receive ENETDOWN and
ENETUNREACH errors from the RPC layer, and is expected to treat them as
being fatal.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If the NFS client was initially created in a container, and that
container is torn down, there is usually no possibity to go back and
destroy any NFS clients that are hung because their virtual network
devices have been unlinked.
Add a flag that tells the NFS client that in these circumstances, it
should treat ENETDOWN and ENETUNREACH errors as fatal to the NFS client.
The option defaults to being on when the mount happens from inside a net
namespace that is not "init_net".
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Writing to this file will clone the 'main' xprt of an xprt_switch and
add it to be used as an additional connection.
--
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
v3: Replace call to xprt_iter_get_xprt() with xprt_iter_get_next()
Link: https://lore.kernel.org/r/20250207204225.594002-5-anna@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
There are certain users that wish to force the NFS client to choose
READDIRPLUS over READDIR for a particular mount. Update the "rdirplus" mount
option to optionally accept values. For "rdirplus=force", the NFS client
will always attempt to use READDDIRPLUS. The setting of "rdirplus=none" is
aliased to the existing "nordirplus".
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/c4cf0de4c8be0930b91bc74bee310d289781cd3b.1741885071.git.bcodding@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The 'comp' compression API has been superseded by the acomp API, which
is a bit more cumbersome to use, but ultimately more flexible when it
comes to hardware implementations.
Now that all the users and implementations have been removed, let's
remove the core plumbing of the 'comp' API as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add ACOMP_REQUEST_ALLOC which is a wrapper around acomp_request_alloc
that falls back to a synchronous stack reqeust if the allocation
fails.
Also add ACOMP_REQUEST_ON_STACK which stores the request on the stack
only.
The request should be freed with acomp_request_free.
Finally add acomp_request_alloc_extra which gives the user extra
memory to use in conjunction with the request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add kmap_local support to the scatterlist iterator. Use it for
all the helper functions in lib/scatterlist.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
fsl_mc_allocator_driver_exit() was added explicitly by
commit 1e8ac83b6caf ("bus: fsl-mc: add fsl_mc_allocator cleanup function")
but was never used.
Remove it.
fsl_mc_portal_reset() was added in 2015 by
commit 197f4d6a4a00 ("staging: fsl-mc: fsl-mc object allocator driver")
but was never used.
Remove it.
fsl_mc_portal_reset() was the only caller of dpmcp_reset().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20241115152055.279732-1-linux@treblig.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This patch adds struct_ops context information to struct bpf_prog_aux.
This context information will be used in the kfunc filter.
Currently the added context information includes struct_ops member
offset and a pointer to struct bpf_struct_ops.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20250319215358.2287371-2-ameryhung@gmail.com
|
|
Add a fabrics option 'concat' to request secure channel concatenation as
specified the NVME Base Specification v2.1, section 8.3.4.3: Secure Channel
Concatenation.
When secure channel concatenation is enabled a 'generated PSK' is inserted
into the keyring such that it's available after reset.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a function to refresh a generated PSK in the specified keyring.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a function to derive the TLS PSK as specified TP8018.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a function to calculate the PSK digest as specified in TP8018.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a function to generate a NVMe PSK from the shared credentials
negotiated by DH-HMAC-CHAP.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add support for a new fwctl-based auxiliary_device for creating a
channel for fwctl support into the AMD/Pensando DSC.
Link: https://patch.msgid.link/r/20250320194412.67983-4-shannon.nelson@amd.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For some reason, cardbus related io/mem size declarations are in
linux/pci.h, whereas non-cardbus sizes are already in pci/pci.h.
Move all them into one place in pci/pci.h.
Link: https://lore.kernel.org/r/20250311174701.3586-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_setup_bridge() is only used within setup-bus.c. Therefore, make it a
static function.
Link: https://lore.kernel.org/r/20250311174701.3586-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Neither pci_reassign_bridge_resources() nor pci_reassign_resource() is used
outside of the PCI subsystem. They seem to be naturally static functions
but since resource fitting/assignment is split between setup-bus.c and
setup-res.c, they fall into different sides of the divide and need to be
declared.
Move the declarations of pci_reassign_bridge_resources() and
pci_reassign_resource() into pci/pci.h to keep them internal to PCI
subsystem.
Link: https://lore.kernel.org/r/20250311174701.3586-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_rescan_bus_bridge_resize() is only used by code inside PCI subsystem.
The comment also falsely advertises it to be for hotplug drivers, yet the
only caller is from sysfs store function. Move the function declaration
into pci/pci.h.
Link: https://lore.kernel.org/r/20250311174701.3586-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Since commit 4e1a7df45480 ("cpumask: Add enabled cpumask
for present CPUs that can be brought online") introduced
cpu_enabled_mask, the comment line describing the mask
has been slightly out of alignment with the adjacent
lines.
Fix this by removing a single space character.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The union vmpacket_largest_possible_header and several structs have not
been used for a long time afaict - remove them.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250311091634.494888-2-thorsten.blum@linux.dev
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250311091634.494888-2-thorsten.blum@linux.dev>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad761 ("selftest: net: add proc_net_pktgen")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711acb8 ("selftests: net: Add test cases for link and peer netns")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The immediate issue being fixed here is a nVMX bug where KVM fails to
detect that, after nested VM-Exit, L1 has a pending IRQ (or NMI).
However, checking for a pending interrupt accesses the legacy PIC, and
x86's kvm_arch_destroy_vm() currently frees the PIC before destroying
vCPUs, i.e. checking for IRQs during the forced nested VM-Exit results
in a NULL pointer deref; that's a prerequisite for the nVMX fix.
The remaining patches attempt to bring a bit of sanity to x86's VM
teardown code, which has accumulated a lot of cruft over the years. E.g.
KVM currently unloads each vCPU's MMUs in a separate operation from
destroying vCPUs, all because when guest SMP support was added, KVM had a
kludgy MMU teardown flow that broke when a VM had more than one 1 vCPU.
And that oddity lived on, for 18 years...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.15
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
|
|
Now that the rstat lock is being re-acquired on every CPU iteration in
cgroup_rstat_flush_locked(), having the initially acquire the lock is
unnecessary and unclear.
Inline cgroup_rstat_flush_locked() into cgroup_rstat_flush() and move
the lock/unlock calls to the beginning and ending of the loop body to
make the critical section obvious.
cgroup_rstat_flush_hold/release() do not make much sense with the lock
being dropped and reacquired internally. Since it has no external
callers, remove it and explicitly acquire the lock in
cgroup_base_stat_cputime_show() instead.
This leaves the code with a single flushing function,
cgroup_rstat_flush().
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Merge series from Francesco Dolcini <francesco@dolcini.it>:
This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to simplify the driver code.
DRC functionality is added in the same patch series to provide the
necessary dynamic range control to make DMIC support useful.
The WM8904 supports digital microphones on two of its inputs:
IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be
connected to an ADC or to the DMIC system. There is an ADC for each
line, and only one DMIC block. This DMIC block is either connected to
DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital
microphones via time multiplexing.
The pin's functionality is decided during hardware design (IN1L vs
DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree.
If one line is analog and one is DMIC, we need to be able to switch
between ADC and DMIC at runtime. The DMIC source is known from the
Device Tree. If both are DMIC inputs, we need to be able to switch the
DMIC source. There is no need to switch between ADC and DMIC at runtime.
Therefore, kcontrols are dynamically added by the driver depending on
its Device Tree configuration.
This is a heavy rework of a previous patch series provided by Alifer
Moraes and Pierluigi Passaro,
https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.
|
|
In particular, serdev_device_write_room() is not called, so the whole
serdev's write_room() can go.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert TTY_DRIVER_TYPE_*, and subtype macros to two enums:
tty_driver_type and tty_driver_subtype. This allows for easier
kernel-doc (later), grouping of these nicely, and proper checking.
The tty_driver's ::type and ::subtype now use these enums instead of
bare "short".
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__tty_alloc_driver()'s kernel-doc needed some care: describe the return
value using the standard "Returns:", and use the new enum tty_driver_flag
for @flags.
Then, the tty_alloc_driver() macro was undocumented, but referenced many
times in the docs. Copy the docs from the above (except the @owner
parameter, obviously).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert TTY_DRIVER_* macros (flags) to an enum. This allows for easier
kernel-doc (the comment needed fine tuning), grouping of these nicely,
and proper checking.
Given these are flags, define them using modern BIT() instead of hex
constants.
It turns out (thanks, kernel-doc checker) that internal
TTY_DRIVER_INSTALLED was undocumented. Fix that too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
So that they can be referenced in structs once converted to enums (in
the next patches).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"N_TTY_BUF_SIZE" is private to n_tty and shall not be exposed to the
world. Definitely not in tty.h somewhere in the middle of "struct
tty_struct".
This is a remnant of moving "read_flags" to "struct n_tty_data" in
commit 3fe780b379fa ("TTY: move ldisc data from tty_struct: bitmaps").
But some cleanup was needed first (in previous patches).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert TTY_* macros (flags) to an enum. This allows for easier
kernel-doc (the comment needed fine tuning), grouping of these nicely,
and proper checking.
Note that these are bit positions. So they are used such as
test_bit(TTY_THROTTLED, ...). Given these are not the user API (only
in-kernel API/ABI), the bit positions are NOT preserved in this patch.
All are renumbered naturally using the enum-auto-numbering.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Flag IOMAP_ATOMIC_SW is not really required. The idea of having this flag
is that the FS ->iomap_begin callback could check if this flag is set to
decide whether to do a SW (FS-based) atomic write. But the FS can set
which ->iomap_begin callback it wants when deciding to do a FS-based
atomic write.
Furthermore, it was thought that IOMAP_ATOMIC_HW is not a proper name, as
the block driver can use SW-methods to emulate an atomic write. So change
back to IOMAP_ATOMIC.
The ->iomap_begin callback needs though to indicate to iomap core that
REQ_ATOMIC needs to be set, so add IOMAP_F_ATOMIC_BIO for that.
These changes were suggested by Christoph Hellwig and Dave Chinner.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250320120250.4087011-4-john.g.garry@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: updates for Linux v6.15
CoreSight self-hosted tracing driver subsystem update for Linux v6.15.
The update includes:
- CoreSight trace capture for Panic/Watchdog timeouts
- Fixes to ETM4x driver to synchronize register reads as required by the TRM
- Support for Qualcomm CoreSight TMC Control Unit driver
- Conversion of device locks to raw_spinlock for components that are used
by the Perf mode.
- Miscellaneous fixes for the subsystem
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (41 commits)
Coresight: Fix a NULL vs IS_ERR() bug in probe
coresight: configfs: Constify struct config_item_type
coresight: docs: Remove target sink from examples
coresight/ultrasoc: change smb_drv_data spinlock's type to raw_spinlock_t
coresight-tmc: change tmc_drvdata spinlock's type to raw_spinlock_t
coresight-replicator: change replicator_drvdata spinlock's type to raw_spinlock_t
coresight-funnel: change funnel_drvdata spinlock's type to raw_spinlock_t
coresight-etb10: change etb_drvdata spinlock's type to raw_spinlock_t
coresight-cti: change cti_drvdata spinlock's type to raw_spinlock_t
coresight: change coresight_trace_id_map's lock type to raw_spinlock_t
coresight-etm4x: change etmv4_drvdata spinlock type to raw_spinlock_t
coresight: change coresight_device lock type to raw_spinlock_t
coresight: add verification process for coresight_etm_get_trace_id
Coresight: Add Coresight TMC Control Unit driver
dt-bindings: arm: Add Coresight TMC Control Unit hardware
Coresight: Change functions to accept the coresight_path
Coresight: Change to read the trace ID from coresight_path
Coresight: Allocate trace ID after building the path
Coresight: Introduce a new struct coresight_path
Coresight: Use coresight_etm_get_trace_id() in traceid_show()
...
|
|
There is an of_property_read_u32_index and of_property_read_u64_index.
This patch adds a similar helper for u16.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250319142059.46692-2-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge the slab feature branch kfree_rcu_tiny for 6.15:
- Move the TINY_RCU kvfree_rcu() implementation from RCU to SLAB
subsystem and cleanup its integration.
|
|
In architectures that use the polling bit, current_clr_polling() employs
smp_mb() to ensure that the clearing of the polling bit is visible to
other cores before checking TIF_NEED_RESCHED.
However, smp_mb() can be costly. Given that clear_bit() is an atomic
operation, replacing smp_mb() with smp_mb__after_atomic() is appropriate.
Many architectures implement smp_mb__after_atomic() as a lighter-weight
barrier compared to smp_mb(), leading to performance improvements.
For instance, on x86, smp_mb__after_atomic() is a no-op. This change
eliminates a smp_mb() instruction in the cpuidle wake-up path, saving
several CPU cycles and thereby reducing wake-up latency.
Architectures that do not use the polling bit will retain the original
smp_mb() behavior to ensure that existing dependencies remain unaffected.
Signed-off-by: Yujun Dong <yujundong@pascal-lab.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241230141624.155356-1-yujundong@pascal-lab.net
|
|
1. predict the file was found
2. explicitly compare the ref to "one", ignoring the dead zone
The latter arguably improves the behavior to begin with. Suppose the
count turned bad -- the previously used ref routine is going to check
for it and return 0, indicating the count does not necessitate taking
->f_pos_lock. But there very well may be several users.
i.e. not paying for special-casing the dead zone improves semantics.
While here spell out each condition in a dedicated if statement. This
has no effect on generated code.
Sizes are as follows (in bytes; gcc 13, x86-64):
stock: 321
likely(): 298
likely()+ref: 280
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250319215801.1870660-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'rockchip', 's390', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
phy_loopback() leaves it to the PHY driver to select the speed of the
loopback mode. Thus, the speed of the loopback mode depends on the PHY
driver in use.
Add support for speed selection to phy_loopback() to enable loopback
with defined speeds. Ensure that link up is signaled if speed changes
as speed is not allowed to change during link up. Link down and up is
necessary for a new speed.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PHY drivers support loopback mode, but it is not possible to select the
speed of the loopback mode. The speed is chosen by the set_loopback()
operation of the PHY driver. Same is valid for genphy_loopback().
There are PHYs that support loopback with different speeds. Extend
set_loopback() to make loopback speed selection possible.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-2-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
* kvm-arm64/pmuv3-asahi:
: Support PMUv3 for KVM guests on Apple silicon
:
: Take advantage of some IMPLEMENTATION DEFINED traps available on Apple
: parts to trap-and-emulate the PMUv3 registers on behalf of a KVM guest.
: Constrain the vPMU to a cycle counter and single event counter, as the
: Apple PMU has events that cannot be counted on every counter.
:
: There is a small new interface between the ARM PMU driver and KVM, where
: the PMU driver owns the PMUv3 -> hardware event mappings.
arm64: Enable IMP DEF PMUv3 traps on Apple M*
KVM: arm64: Provide 1 event counter on IMPDEF hardware
drivers/perf: apple_m1: Provide helper for mapping PMUv3 events
KVM: arm64: Remap PMUv3 events onto hardware
KVM: arm64: Advertise PMUv3 if IMPDEF traps are present
KVM: arm64: Compute synthetic sysreg ESR for Apple PMUv3 traps
KVM: arm64: Move PMUVer filtering into KVM code
KVM: arm64: Use guard() to cleanup usage of arm_pmus_lock
KVM: arm64: Drop kvm_arm_pmu_available static key
KVM: arm64: Use a cpucap to determine if system supports FEAT_PMUv3
KVM: arm64: Always support SW_INCR PMU event
KVM: arm64: Compute PMCEID from arm_pmu's event bitmaps
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.15
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
* tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
soc: samsung: include linux/array_size.h where needed
soc: samsung: exynos-chipid: add support for exynos7870
dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible
soc: samsung: exynos-chipid: add exynos2200 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-pmu: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos2200
firmware: Exynos ACPM: Fix spelling mistake "Faile" -> "Failed"
MAINTAINERS: add entry for the Samsung Exynos ACPM mailbox protocol
firmware: add Exynos ACPM protocol driver
dt-bindings: firmware: add google,gs101-acpm-ipc
soc: samsung: usi: implement support for USIv1 and exynos8895
soc: samsung: usi: add a routine for unconfiguring the ip
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
soc: samsung: Use syscon_regmap_lookup_by_phandle_args
Link: https://lore.kernel.org/r/20250309185601.10616-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
