| Age | Commit message (Collapse) | Author |
|---|
|
None of these functions are used outside of their source files.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/878qpe2gnx.ffs@tglx
|
|
'extern' is not needed for function declarations. So remove it from
irqdomain.h. Note that the declarations are now unified as some had
'extern' and some did not.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250115085409.1629787-2-jirislaby@kernel.org
|
|
Compare registers are used in devices to compare a counter channel
against a particular count value (e.g. to check if a threshold has been
reached). A macro COUNTER_COMP_COMPARE() is introduced to facilitate the
creation of compare components as Count extensions.
Link: https://lore.kernel.org/r/20250306-introduce-compare-component-v1-1-93993b3dca9c@kernel.org
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Add recovery counters group layout of PPCNT (Ports Performance Counters
Register). This group counts recovery events per link. Also add the
corresponding bit in PCAM to indicate this group is supported.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741545697-23041-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Mainline now contains various changes to pipes that are relevant for
other pipe work this cycle. So merge them into the respective VFS tree.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
phy_pm_runtime_allow() and phy_pm_runtime_forbid() were added in 2013
as part of
commit ff764963479a ("drivers: phy: add generic PHY framework")
but have remained unused.
Remove them.
Fix up the (English) docs - I've left the Chinese translation.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250306015408.277729-1-linux@treblig.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Resolves the merge conflict with:
drivers/usb/typec/ucsi/ucsi_acpi.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Mirror abstraction added for master ops.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a convenience pointer to the 'sdw_bus' structure. BPT is a
dedicated stream which will typically not be handled by DAIs or
dailinks. Since there's only one BPT stream per link, storing the
pointer at the link level seems rather natural.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add definitions and helpers for the BPT/BRA protocol. Peripheral
drivers (aka ASoC codec drivers) can use this API to send bulk data
such as firmware or tables. The design intent is however NOT to
directly use this API but to rely on an intermediate regmap layer.
The API is only available when no other audio streams have been
allocated, and only one BTP/BRA stream is allowed per link. To avoid
the addition of yet another lock, the refcount tests are handled in
the stream master_runtime alloc/free routines where the bus_lock is
already held. Another benefit of this approach is that the same
bus_lock is used to handle runtime and port linked lists, which
reduces the potential for misaligned configurations.
In addition to exclusion with audio streams, BPT transfers have a lot
of overhead, specifically registers writes are needed to enable
transport in DP0. Most DMAs don't handle too well very small data sets
and they may have alignment limitations.
The size and alignment requirements are for now not handled by the
core but must be checked by platform-specific drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In the existing definition of sdw_stream_runtime, the 'type' member is
never set and defaults to PCM. To prepare for the BPT/BRA support, we
need to special-case streams and make use of the 'type'.
No functional change for now, the implicit PCM type is now explicit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
BPT/BRA need to be special cased, i.e. there's no point in using the
bandwidth allocation since the entire frame can be used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We need the fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This moves the rust_fmt_argument function over to use the new #[export]
macro, which will verify at compile-time that the function signature
matches what is in the header file.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-4-41fbad85a27f@google.com
[ Removed period as requested by Andy. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
|
|
Fix typos and whitespace errors.
Link: https://lore.kernel.org/r/20250307231715.438518-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add RX and TX RDMA_TRANSPORT flow table namespace, and the ability
to create flow tables in those namespaces.
The RDMA_TRANSPORT RX and TX are per vport.
Packets will traverse through RDMA_TRANSPORT_RX after RDMA_RX and through
RDMA_TRANSPORT_TX before RDMA_TX, ensuring proper control and management.
RDMA_TRANSPORT domains are managed by the vport group manager.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/a6b550d9859a197eafa804b9a8d76916ca481da9.1740574103.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Query ADV_RDMA capabilities which provide information for
advanced RDMA related features.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/e3e6ede03ea31cd201078dcdd4e407608e4a5a87.1740574103.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Limit non-privileged UID commands to half of the available command slots
when privileged UIDs are present.
Privileged throttle commands will not be limited.
Use an xarray to store privileged UIDs. Add insert and remove functions
for privileged UIDs management.
Non-user commands (with uid 0) are not limited.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/d2f3dd9a0dbad3c9f2b4bb0723837995e4e06de2.1740574103.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Previously, throttle commands were identified and limited based on
opcode. These commands were limited to half the command slots using a
semaphore, and callback commands checked the opcode to determine
semaphore release.
To allow exceptions, we introduce a variable to indicate when the
throttle lock is held. This allows scenarios where throttle commands
are not limited. Callback functions use this variable to determine
if the throttle semaphore needs to be released.
This patch contains no functional changes. It's a preparation for the
next patch.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Link: https://patch.msgid.link/055d975edeb816ac4c0fd1e665c6157d11947d26.1740574103.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add RDMA_CTRL UCTX capabilities and add the RDMA_CTRL general object
type in hca_cap_2.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/ef7eb24be9a6f247ab52e8b4480350072e5182f5.1740574103.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The static function devm_pci_epc_match() is only invoked within the
devm_pci_epc_destroy(). However, since it was initially introduced,
this new API has had no callers.
Thus, remove both the unused API and the static function.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250217-remove_api-v2-1-b169c9117045@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Add a helper function to convert a size to the representation used by the
Resizable BAR Capability Register.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250131182949.465530-11-cassel@kernel.org
[mani: squashed the change that added PCIe spec reference to comments
from https://lore.kernel.org/linux-pci/20250219171454.2903059-2-cassel@kernel.org]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
A resizable BAR is different from a normal BAR in a few ways:
- The minimum size of a resizable BAR is 1 MB.
- Each BAR that is resizable has a Capability and Control register in
the Resizable BAR Capability structure.
These registers contain the supported sizes and the currently selected
size of a resizable BAR.
The supported sizes is a bitmap of the supported sizes. The selected size
is a single value that is equal to one of the supported sizes.
A resizable BAR thus has to be configured differently than a
BAR_PROGRAMMABLE BAR, which usually sets the BAR size/mask in a vendor
specific way.
The PCI endpoint framework currently does not support resizable BARs.
Add a BAR type BAR_RESIZABLE, so that an EPC driver can support resizable
BARs properly.
Note that the pci_epc_set_bar() API takes a struct pci_epf_bar which tells
the EPC driver how it wants to configure the BAR.
struct pci_epf_bar only has a single size struct member.
This means that an EPC driver will only be able to set a single supported
size. This is perfectly fine, as we do not need the complexity of allowing
a host to change the size of the BAR. If someone ever wants to support
resizing a resizable BAR, the pci_epc_set_bar() API can be extended in the
future.
With these changes, we allow an EPF driver to configure the size of
Resizable BARs, rather than forcing them to a 1 MB size.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250131182949.465530-10-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The vDSO implementation can only include headers from the vdso/
namespace. To enable the usage of ____cacheline_aligned from
the vDSO, move it and its dependencies into a new header vdso/cache.h.
Keep compatibility by including vdso/cache.h from linux/cache.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250303-vdso-clock-v1-1-c1b5c69a166f@linutronix.de
|
|
cpio extraction currently does a memcpy to ensure that the archive hex
fields are null terminated for simple_strtoul(). simple_strntoul() will
allow us to avoid the memcpy.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20250304061020.9815-4-ddiss@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unlike the decompression code, the compression code in LZO never
checked for output overruns. It instead assumes that the caller
always provides enough buffer space, disregarding the buffer length
provided by the caller.
Add a safe compression interface that checks for the end of buffer
before each write. Use the safe interface in crypto/lzo.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The vanilla has_capability() function has been unused since 2018's
commit dcb569cf6ac9 ("Smack: ptrace capability use fixes")
Remove it.
Fixup a comment in security/commoncap.c that referenced it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
|
|
Since we're going to approach integer overflow mitigation a type at a
time, we need to enable all of the associated sanitizers, and then opt
into types one at a time.
Rename the existing "signed wrap" sanitizer to just the entire topic area:
"integer wrap". Enable the implicit integer truncation sanitizers, with
required callbacks and tests.
Notably, this requires features (currently) only available in Clang,
so we can depend on the cc-option tests to determine availability
instead of doing version tests.
Link: https://lore.kernel.org/r/20250307041914.937329-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
netpoll tries to refill the skb queue on every packet send, independently
if packets are being consumed from the pool or not. This was
particularly problematic while being called from printk(), where the
operation would be done while holding the console lock.
Introduce a more intelligent approach to skb queue management. Instead
of constantly attempting to refill the queue, the system now defers
refilling to a work queue and only triggers the workqueue when a buffer
is actually dequeued. This change significantly reduces operations with
the lock held.
Add a work_struct to the netpoll structure for asynchronous refilling,
updating find_skb() to schedule refill work only when necessary (skb is
dequeued).
These changes have demonstrated a 15% reduction in time spent during
netpoll_send_msg operations, especially when no SKBs are not consumed
from consumed from pool.
When SKBs are being dequeued, the improvement is even better, around
70%, mainly because refilling the SKB pool is now happening outside of
the critical patch (with console_owner lock held).
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250304-netpoll_refill_v2-v1-1-06e2916a4642@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink_init_eee() is currently unused.
It was last added in 2019 by
commit 86e58135bc4a ("net: phylink: add phylink_init_eee() helper")
but it didn't actually wire a use up.
It had previous been removed in 2017 by
commit 939eae25d9a5 ("phylink: remove phylink_init_eee()").
Remove it again.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250306184534.246152-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This removes .of_node from 'struct power_supply', since there
is already a copy in .dev.of_node and there is no need to have
two copies.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250225-psy-core-convert-to-fwnode-v1-1-d5e4369936bb@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The previous patches in this series removed the only caller
and only setter of this method.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250307230225.128775-4-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
power_supply_set_battery_charged() has been unused since 2019's
commit 0f884f8a090e ("ARM: pxa: remove raumfeld board files and
defconfig")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250307230225.128775-2-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible with
the existing user space (Mario Limonciello)"
* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86/amd: pmf: Add balanced-performance to hidden choices
platform/x86/amd: pmf: Add 'quiet' to hidden choices
ACPI: platform_profile: Add support for hidden choices
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)
- Name the RQF flags enum, fixing issues with anon enums and BPF import
of it
- ublk parameter setting fix
- GPT partition 7-bit conversion fix
* tag 'block-6.14-20250306' of git://git.kernel.dk/linux:
block: Name the RQF flags enum
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
block: fix conversion of GPT partition name to 7-bit
ublk: set_params: properly check if parameters can be applied
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
|
|
Import registered buffers for vectored reads and writes later at issue
time as we now do for other fixed ops.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e8491c976e4ab83a4e3dc428e9fe7555e59583b8.1741362889.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add io_import_reg_vec(), which will be responsible for importing
vectored registered buffers. The function might reallocate the vector,
but it'd try to do the conversion in place first, which is why it's
required of the user to pad the iovec to the right border of the cache.
Overlapping also depends on struct iovec being larger than bvec, which
is not the case on e.g. 32 bit architectures. Don't try to complicate
this case and make sure vectors never overlap, it'll be improved later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/60bd246b1249476a6996407c1dbc38ef6febad14.1741362889.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I need a convenient way to pass around and work with iovec+size pair,
put them into a structure and makes use of it in rw.c
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d39fadafc9e9047b0a292e5be6db3cf2f48bb1f7.1741362889.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-6.15/io_uring-epoll-wait:
io_uring/epoll: add support for IORING_OP_EPOLL_WAIT
io_uring/epoll: remove CONFIG_EPOLL guards
eventpoll: add epoll_sendevents() helper
eventpoll: abstract out ep_try_send_events() helper
eventpoll: abstract out parameter sanity checking
|
|
* for-6.15/io_uring-rx-zc: (80 commits)
io_uring/zcrx: add selftest case for recvzc with read limit
io_uring/zcrx: add a read limit to recvzc requests
io_uring: add missing IORING_MAP_OFF_ZCRX_REGION in io_uring_mmap
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
net: add helpers for setting a memory provider on an rx queue
net: page_pool: add memory provider helpers
net: prepare for non devmem TCP memory providers
...
|
|
* for-6.15/io_uring: (80 commits)
io_uring: introduce io_cache_free() helper
io_uring/rsrc: skip NULL file/buffer checks in io_free_rsrc_node()
io_uring/rsrc: avoid NULL node check on io_sqe_buffer_register() failure
io_uring/rsrc: call io_free_node() on io_sqe_buffer_register() failure
io_uring/rsrc: free io_rsrc_node using kfree()
io_uring/rsrc: split out io_free_node() helper
io_uring/rsrc: include io_uring_types.h in rsrc.h
ublk: don't cast registered buffer index to int
io_uring/nop: use io_find_buf_node()
io_uring/rsrc: declare io_find_buf_node() in header file
io_uring/ublk: report error when unregister operation fails
io_uring: convert cmd_to_io_kiocb() macro to function
io_uring/uring_cmd: specify io_uring_cmd_import_fixed() pointer type
io_uring/rsrc: use rq_data_dir() to compute bvec dir
selftests: ublk: add ublk zero copy test
selftests: ublk: add file backed ublk
selftests: ublk: add kernel selftests for ublk
io_uring: cache nodes and mapped buffers
ublk: zc register/unregister bvec
io_uring: add support for kernel registered bvecs
...
|
|
The usage of __rcu in the Energy Model code is quite inconsistent
which causes the following sparse warnings to trigger:
kernel/power/energy_model.c:169:15: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:169:15: expected struct em_perf_table [noderef] __rcu *table
kernel/power/energy_model.c:169:15: got struct em_perf_table *
kernel/power/energy_model.c:171:9: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:171:9: expected struct callback_head *head
kernel/power/energy_model.c:171:9: got struct callback_head [noderef] __rcu *
kernel/power/energy_model.c:171:9: warning: cast removes address space '__rcu' of expression
kernel/power/energy_model.c:182:19: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:182:19: expected struct kref *kref
kernel/power/energy_model.c:182:19: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:200:15: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:200:15: expected struct em_perf_table [noderef] __rcu *table
kernel/power/energy_model.c:200:15: got void *[assigned] _res
kernel/power/energy_model.c:204:20: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:204:20: expected struct kref *kref
kernel/power/energy_model.c:204:20: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:320:19: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:320:19: expected struct kref *kref
kernel/power/energy_model.c:320:19: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:325:45: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:325:45: expected struct em_perf_state *table
kernel/power/energy_model.c:325:45: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:425:45: warning: incorrect type in argument 3 (different address spaces)
kernel/power/energy_model.c:425:45: expected struct em_perf_state *table
kernel/power/energy_model.c:425:45: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:442:15: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:442:15: expected void const *objp
kernel/power/energy_model.c:442:15: got struct em_perf_table [noderef] __rcu *[assigned] em_table
kernel/power/energy_model.c:626:55: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:626:55: expected struct em_perf_state *table
kernel/power/energy_model.c:626:55: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:681:16: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:681:16: expected struct em_perf_state *new_ps
kernel/power/energy_model.c:681:16: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:699:37: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:699:37: expected struct em_perf_state *table
kernel/power/energy_model.c:699:37: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:733:38: warning: incorrect type in argument 3 (different address spaces)
kernel/power/energy_model.c:733:38: expected struct em_perf_state *table
kernel/power/energy_model.c:733:38: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:855:53: warning: dereference of noderef expression
kernel/power/energy_model.c:864:32: warning: dereference of noderef expression
This is because the __rcu annotation for sparse is only applicable to
pointers that need rcu_dereference() or equivalent for protection, which
basically means pointers assigned with rcu_assign_pointer().
Make all of the above sparse warnings go away by cleaning up the usage
of __rcu and using rcu_dereference_protected() where applicable.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5885405.DvuYhMxLoT@rjwysocki.net
|
|
The commit titled "block/bdev: lift block size restrictions to 64k"
lifted the block layer's max supported block size to 64k inside the
helper blk_validate_block_size() now that we support large folios.
However in lifting the block size we also removed the silly use
cases many filesystems have to use sb_set_blocksize() to *verify*
that the block size <= PAGE_SIZE. The call to sb_set_blocksize() was
used to check the block size <= PAGE_SIZE since historically we've
always supported userspace to create for example 64k block size
filesystems even on 4k page size systems, but what we didn't allow
was mounting them. Older filesystems have been using the check with
sb_set_blocksize() for years.
While, we could argue that such checks should be filesystem specific,
there are much more users of sb_set_blocksize() than LBS enabled
filesystem on upstream, so just do the easier thing and bring back
the PAGE_SIZE check for sb_set_blocksize() users and only skip it
for LBS enabled filesystems.
This will ensure that tests such as generic/466 when run in a loop
against say, ext4, won't try to try to actually mount a filesystem with
a block size larger than your filesystem supports given your PAGE_SIZE
and in the worst case crash.
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250307020403.3068567-1-mcgrof@kernel.org
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The port header is a general file under include, yet it
contains declarations for functions that are either not
exported or exported but not used outside the mlx5_core
driver.
To enhance code organization, we move these declarations
to mlx5_core.h, where they are more appropriately scoped.
This refactor removes unnecessary exported symbols and
prevents unexported functions from being inadvertently
referenced outside of the mlx5_core driver.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250304160620.417580-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 5f89154e8e9e3445f9b59 ("block: Use enum to define RQF_x bit
indexes") converted the RQF flags to an anonymous enum, which was
a beneficial change. This patch goes one step further by naming the enum
as "rqf_flags".
This naming enables exporting these flags to BPF clients, eliminating
the need to duplicate these flags in BPF code. Instead, BPF clients can
now access the same kernel-side values through CO:RE (Compile Once, Run
Everywhere), as shown in this example:
rqf_stats = bpf_core_enum_value(enum rqf_flags, __RQF_STATS)
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250306-rqf_flags-v1-1-bbd64918b406@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e45a ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e77 ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
