summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2020-03-26net: add a reference to MACsec ops in net_deviceAntoine Tenart
This patch adds a reference to MACsec ops to the net_device structure, allowing net device drivers to implement offloading operations for MACsec. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: introduce the MACSEC netdev featureAntoine Tenart
This patch introduce a new netdev feature, which will be used by drivers to state they can perform MACsec transformations in hardware. The patchset was gathered by Mark, macsec functinality itself was implemented by Dmitry, Mark and Pavel Belous. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26Merge tag 'ceph-for-5.6-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A patch for a rather old regression in fullness handling and two memory leak fixes, marked for stable" * tag 'ceph-for-5.6-rc8' of git://github.com/ceph/ceph-client: ceph: fix memory leak in ceph_cleanup_snapid_map() libceph: fix alloc_msg_with_page_vector() memory leaks ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULL
2020-03-26Merge tag 'mac80211-for-net-2020-03-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have the following fixes: * drop data packets if there's no key for them anymore, after there had been one, to avoid sending them in clear when hostapd removes the key before it removes the station and the packets are still queued * check port authorization again after dequeue, to avoid sending packets if the station is no longer authorized * actually remove the authorization flag before the key so packets are also dropped properly because of this * fix nl80211 control port packet tagging to handle them as packets allowed to go out without encryption * fix NL80211_ATTR_CHANNEL_WIDTH outgoing netlink attribute width (should be 32 bits, not 8) * don't WARN in a CSA scenario that happens on some APs * fix HE spatial reuse element size calculation ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26x86: get rid of put_user_try in __setup_rt_frame() (both 32bit and 64bit)Al Viro
Straightforward, except for save_altstack_ex() stuck in those. Replace that thing with an analogue that would use unsafe_put_user() instead of put_user_ex() (called compat_save_altstack()) and be done with that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-26mm/hmm: check the device private page owner in hmm_range_fault()Christoph Hellwig
hmm_range_fault() will succeed for any kind of device private memory, even if it doesn't belong to the calling entity. While nouveau has some crude checks for that, they are broken because they assume nouveau is the only user of device private memory. Fix this by passing in an expected pgmap owner in the hmm_range_fault structure. If a device_private page is found and doesn't match the owner then it is treated as an non-present and non-faultable page. This prevents a bug in amdgpu, where it doesn't know how to handle device_private pages, but hmm_range_fault would return them anyhow. Fixes: 4ef589dc9b10 ("mm/hmm/devmem: device memory hotplug using ZONE_DEVICE") Link: https://lore.kernel.org/r/20200316193216.920734-5-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm: simplify device private page handling in hmm_range_faultChristoph Hellwig
Remove the HMM_PFN_DEVICE_PRIVATE flag, no driver has ever set this flag on input, and the only place that uses it on output can be trivially changed to use is_device_private_page(). This removes the ability to request that device_private pages are faulted back into system memory. Link: https://lore.kernel.org/r/20200316193216.920734-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm: handle multiple owners of device private pages in migrate_vmaChristoph Hellwig
Add a new src_owner field to struct migrate_vma. If the field is set, only device private pages with page->pgmap->owner equal to that field are migrated. If the field is not set only "normal" pages are migrated. Fixes: df6ad69838fc ("mm/device-public-memory: device memory cache coherent with CPU") Link: https://lore.kernel.org/r/20200316193216.920734-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Tested-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26memremap: add an owner field to struct dev_pagemapChristoph Hellwig
Add a new opaque owner field to struct dev_pagemap, which will allow the hmm and migrate_vma code to identify who owns ZONE_DEVICE memory, and refuse to work on mappings not owned by the calling entity. Link: https://lore.kernel.org/r/20200316193216.920734-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Tested-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm/hmm: remove the unused HMM_FAULT_ALLOW_RETRY flagChristoph Hellwig
The HMM_FAULT_ALLOW_RETRY isn't used anywhere in the tree. Remove it and the weird -EAGAIN handling where handle_mm_fault() drops the mmap_sem. Link: https://lore.kernel.org/r/20200316135310.899364-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm/hmm: don't provide a stub for hmm_range_fault()Christoph Hellwig
All callers of hmm_range_fault depend on CONFIG_HMM_MIRROR, so don't bother with a stub. Link: https://lore.kernel.org/r/20200316135310.899364-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.cBartlomiej Zolnierkiewicz
* move ata_eh_analyze_ncq_error() and ata_eh_read_log_10h() to libata-sata.c * add static inline for ata_eh_analyze_ncq_error() for CONFIG_SATA_HOST=n case (link->sactive is non-zero only if NCQ commands are actually queued so empty function body is sufficient) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o after: 15446 18 0 15464 3c68 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-eh.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-eh.c: * move sata_async_notification() to libata-sata.c: Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16243 18 0 16261 3f85 drivers/ata/libata-eh.o after: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_sas_*() to libata-sata.cBartlomiej Zolnierkiewicz
* un-inline: - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * un-static: - ata_scsi_sdev_config() - ata_scsi_dev_config() - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * move ata_sas_*() to libata-sata.c: * add static inlines for CONFIG_SATA_HOST=n case for ata_sas_{allocate,free}_tag() Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o after: 18330 23 576 18929 49f1 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-scsi.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-scsi.c: * un-static ata_scsi_find_dev() * move following code to libata-sata.c: - SATA only sysfs device attributes handling - __ata_change_queue_depth() - ata_scsi_change_queue_depth() * cover with CONFIG_SATA_HOST ifdef SATA only sysfs device attributes handling code and ATA_SHT_NCQ() macro in <linux/libata.h> Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20702 105 576 21383 5387 drivers/ata/libata-scsi.o after: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_deb_timing_*() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_deb_timing_*() to libata-sata.c * add static inline for sata_ehc_deb_timing() for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32158 572 40 32770 8002 drivers/ata/libata-core.o after: 32015 572 40 32627 7f73 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_qc_complete_multiple() to libata-sata.cBartlomiej Zolnierkiewicz
* move ata_qc_complete_multiple() to libata-sata.c Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32559 572 40 33171 8193 drivers/ata/libata-core.o after: 32162 572 40 32774 8006 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_hardreset() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_link_hardreset() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case * make sata_set_spd_needed() static Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32724 572 40 33336 8238 drivers/ata/libata-core.o after: 32559 572 40 33171 8193 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_{debounce,resume}() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_link_{debounce,resume}() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case (only one, for sata_link_resume() is needed) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32816 572 40 33428 8294 drivers/ata/libata-core.o after: 32724 572 40 33336 8238 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move *sata_set_spd*() to libata-sata.cBartlomiej Zolnierkiewicz
* move *sata_set_spd*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32842 572 40 33458 82ae drivers/ata/libata-core.o after: 32812 572 40 33428 8290 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_scr_*() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_scr_*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 35642 572 40 36254 8d9e drivers/ata/libata-core.o 16607 18 0 16625 40f1 drivers/ata/libata-eh.o after: 32846 572 40 33458 82b2 drivers/ata/libata-core.o 16243 18 0 16261 3f85 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-core.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-core.c: * move following functions to libata-sata.c: - ata_tf_to_fis() - ata_tf_from_fis() - sata_link_scr_lpm() - ata_slave_link_init() - sata_lpm_ignore_phy_events() * group above functions together in <linux/libata.h> * include libata-sata.c in the build when CONFIG_SATA_HOST=y Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36762 572 40 37374 91fe drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()Bartlomiej Zolnierkiewicz
When CONFIG_SATA_HOST=n there are no NCQ capable host drivers built so it is safe to hardwire ata_ncq_enabled() to always return zero. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37820 572 40 38432 9620 drivers/ata/libata-core.o 21040 105 576 21721 54d9 drivers/ata/libata-scsi.o 17405 18 0 17423 440f drivers/ata/libata-eh.o after: 37582 572 40 38194 9532 drivers/ata/libata-core.o 20702 105 576 21383 5387 drivers/ata/libata-scsi.o 17353 18 0 17371 43db drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: separate PATA timings code from libata-core.cBartlomiej Zolnierkiewicz
Separate PATA timings code from libata-core.c: * add PATA_TIMINGS config option and make corresponding PATA host drivers (and ATA ACPI code) select it * move following PATA timings code to libata-pata-timings.c: - ata_timing_quantize() - ata_timing_merge() - ata_timing_find_mode() - ata_timing_compute() * group above functions together in <linux/libata.h> * include libata-pata-timings.c in the build when PATA_TIMINGS config option is enabled * cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it depends on code from libata-core.c and libata-pata-timings.c while its only user is ATA ACPI) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39688 573 40 40301 9d6d drivers/ata/libata-core.o after: 37820 572 40 38432 9620 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: optimize struct ata_force_param sizeBartlomiej Zolnierkiewicz
Optimize struct ata_force_param size by: - using u8 for cbl and spd_limit fields - using u16 for lflags field Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 41064 573 40 41677 a2cd drivers/ata/libata-core.o after: 40654 573 40 41267 a133 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hostsBartlomiej Zolnierkiewicz
There is no point in exposing ncq_enable_prio sysfs attribute for devices on PATA and non-NCQ capable SATA hosts so: * remove dev_attr_ncq_prio_enable from ata_common_sdev_attrs[] * add ata_ncq_sdev_attrs[] * update ATA_NCQ_SHT() macro to use ata_ncq_sdev_attrs[] Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26amba: Initialize dma_parms for amba devicesUlf Hansson
It's currently the amba driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common amba bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Cc: <stable@vger.kernel.org> Cc: Russell King <linux@armlinux.org.uk> Suggested-by: Christoph Hellwig <hch@lst.de> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200325113407.26996-3-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26driver core: platform: Initialize dma_parms for platform devicesUlf Hansson
It's currently the platform driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common platform bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Cc: <stable@vger.kernel.org> Suggested-by: Christoph Hellwig <hch@lst.de> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200325113407.26996-2-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26pNFS: Add a helper to allocate the array of bucketsTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-26bus: mhi: core: Add support for reading MHI info from deviceManivannan Sadhasivam
The MHI register base has several registers used for getting the MHI specific information such as version, family, major, and minor numbers from the device. This information can be used by the controller drivers for usecases such as applying quirks for a specific revision etc... While at it, let's also rearrange the local variables in mhi_register_controller(). Suggested-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200324061050.14845-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26mmc: core: Re-work the code for eMMC sanitizeUlf Hansson
The error path for sanitize operations that completes with -ETIMEDOUT, is tightly coupled with the internal request handling code of the core. More precisely, mmc_wait_for_req_done() checks for specific sanitize errors. This is not only inefficient as it affects all types of requests, but also hackish. Therefore, let's improve the behaviour by moving the error path out of the mmc core. To do that, retuning needs to be held while running the sanitize operation. Moreover, to avoid exporting unnecessary symbols to the mmc block module, let's move the code into the mmc_ops.c file. While updating the actual code, let's also take the opportunity to clean up some of the mess around it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200316152152.15122-1-ulf.hansson@linaro.org
2020-03-26Merge tag 'v5.6-rc7' into i2c/for-5.7Wolfram Sang
Linux 5.6-rc7
2020-03-26KVM: Fix out of range accesses to memslotsSean Christopherson
Reset the LRU slot if it becomes invalid when deleting a memslot to fix an out-of-bounds/use-after-free access when searching through memslots. Explicitly check for there being no used slots in search_memslots(), and in the caller of s390's approximation variant. Fixes: 36947254e5f9 ("KVM: Dynamically size memslot array based on number of used slots") Reported-by: Qian Cai <cai@lca.pw> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200320205546.2396-2-sean.j.christopherson@intel.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-25remoteproc/omap: Remove the platform_data headerTero Kristo
The platform data header for OMAP remoteproc is no longer used for anything post ti-sysc and DT conversion, so just remove it completely. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Suman Anna <s-anna@ti.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200324110035.29907-9-t-kristo@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25remoteproc: Introduce "panic" callback in opsBjorn Andersson
Introduce generic support for handling kernel panics in remoteproc drivers, in order to allow operations needed for aiding in post mortem system debugging, such as flushing caches etc. The function can return a number of milliseconds needed by the remote to "settle" and the core will wait the longest returned duration before returning from the panic handler. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200324052904.738594-3-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25remoteproc: Adapt coredump to generate correct elf typeClement Leger
Now that remoteproc can load an elf64, coredump elf class should be the same as the loaded elf class. In order to do that, add a elf_class field to rproc with default values. If an elf is loaded successfully, this field will be updated with the loaded elf class. Then, the coredump core code has been modified to use the generic elf macro in order to create an elf file with correct class. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20200302093902.27849-9-cleger@kalray.eu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25remoteproc: Use u64 type for boot_addrClement Leger
elf64 entry is defined as a u64. Since boot_addr is used to store the elf entry point, change boot_addr type to u64 to support both elf32 and elf64. In the same time, fix users that were using this variable. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20200302093902.27849-4-cleger@kalray.eu [bjorn: Fixes up return type of rproc_get_boot_addr()] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25remoteproc: Use size_t instead of int for rproc_mem_entry lenClement Leger
Now that rproc_da_to_va uses a size_t for length, use a size_t for len field of rproc_mem_entry. Function used to create such structures now takes a size_t instead of int to allow full size range to be handled. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20200302093902.27849-3-cleger@kalray.eu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25remoteproc: Use size_t type for len in da_to_vaClement Leger
With upcoming changes in elf loader for elf64 support, section size will be a u64. When used with da_to_va, this will potentially lead to overflow if using the current "int" type for len argument. Change da_to_va prototype to use a size_t for len and fix all users of this function. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20200302093902.27849-2-cleger@kalray.eu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25clk: Pass correct arguments to __clk_hw_register_gate()Stephen Boyd
I copy/pasted these macros and forgot to update the argument names and where they're passed to. Fix it so that these macros make sense. Reported-by: Maxime Ripard <maxime@cerno.tech> Fixes: 194efb6e2667 ("clk: gate: Add support for specifying parents via DT/pointers") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200325022257.148244-1-sboyd@kernel.org Tested-by: Maxime Ripard <mripard@kernel.org>
2020-03-25fanotify: report name info for FAN_DIR_MODIFY eventAmir Goldstein
Report event FAN_DIR_MODIFY with name in a variable length record similar to how fid's are reported. With name info reporting implemented, setting FAN_DIR_MODIFY in mark mask is now allowed. When events are reported with name, the reported fid identifies the directory and the name follows the fid. The info record type for this event info is FAN_EVENT_INFO_TYPE_DFID_NAME. For now, all reported events have at most one info record which is either FAN_EVENT_INFO_TYPE_FID or FAN_EVENT_INFO_TYPE_DFID_NAME (for FAN_DIR_MODIFY). Later on, events "on child" will report both records. There are several ways that an application can use this information: 1. When watching a single directory, the name is always relative to the watched directory, so application need to fstatat(2) the name relative to the watched directory. 2. When watching a set of directories, the application could keep a map of dirfd for all watched directories and hash the map by fid obtained with name_to_handle_at(2). When getting a name event, the fid in the event info could be used to lookup the base dirfd in the map and then call fstatat(2) with that dirfd. 3. When watching a filesystem (FAN_MARK_FILESYSTEM) or a large set of directories, the application could use open_by_handle_at(2) with the fid in event info to obtain dirfd for the directory where event happened and call fstatat(2) with this dirfd. The last option scales better for a large number of watched directories. The first two options may be available in the future also for non privileged fanotify watchers, because open_by_handle_at(2) requires the CAP_DAC_READ_SEARCH capability. Link: https://lore.kernel.org/r/20200319151022.31456-15-amir73il@gmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2020-03-25Merge tag 'spi-nor/for-5.7' into mtd/nextMiquel Raynal
SPI NOR core changes: - move all the manufacturer specific quirks/code out of the core, to make the core logic more readable and thus ease maintenance. - move the SFDP logic out of the core, it provides a better separation between the SFDP parsing and core logic. - trim what is exposed in spi-nor.h. The SPI NOR controllers drivers must not be able to use structures that are meant just for the SPI NOR core. - use the spi-mem direct mapping API to let advanced controllers optimize the read/write operations when they support direct mapping. - add generic formula for the Status Register block protection handling. It fixes some long standing locking limitations and eases the addition of the 4bit block protection support. - add block protection support for flashes with 4 block protection bits in the Status Register. SPI NOR controller drivers changes: - the mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor driver. Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts.
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix deadlock in bpf_send_signal() from Yonghong Song. 2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan. 3) Add missing locking in iwlwifi mvm code, from Avraham Stern. 4) Fix MSG_WAITALL handling in rxrpc, from David Howells. 5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong Wang. 6) Fix producer race condition in AF_PACKET, from Willem de Bruijn. 7) cls_route removes the wrong filter during change operations, from Cong Wang. 8) Reject unrecognized request flags in ethtool netlink code, from Michal Kubecek. 9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from Doug Berger. 10) Don't leak ct zone template in act_ct during replace, from Paul Blakey. 11) Fix flushing of offloaded netfilter flowtable flows, also from Paul Blakey. 12) Fix throughput drop during tx backpressure in cxgb4, from Rahul Lakkireddy. 13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric Dumazet. 14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well, also from Eric Dumazet. 15) Restrict macsec to ethernet devices, from Willem de Bruijn. 16) Fix reference leak in some ethtool *_SET handlers, from Michal Kubecek. 17) Fix accidental disabling of MSI for some r8169 chips, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits) net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build net: ena: Add PCI shutdown handler to allow safe kexec selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED selftests/net: add missing tests to Makefile r8169: re-enable MSI on RTL8168c net: phy: mdio-bcm-unimac: Fix clock handling cxgb4/ptp: pass the sign of offset delta in FW CMD net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop net: cbs: Fix software cbs to consider packet sending time net/mlx5e: Do not recover from a non-fatal syndrome net/mlx5e: Fix ICOSQ recovery flow with Striding RQ net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset net/mlx5e: Enhance ICOSQ WQE info fields net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure selftests: netfilter: add nfqueue test case netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress netfilter: nft_fwd_netdev: validate family and chain type netfilter: nft_set_rbtree: Detect partial overlaps on insertion netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start() netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion ...
2020-03-25Merge tag 'zynqmp-soc-for-v5.7' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
arm/soc arm64: soc: ZynqMP SoC changes for v5.7 - Change firmware dependency to be able to disable it * tag 'zynqmp-soc-for-v5.7' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Make zynqmp_firmware driver optional include: linux: firmware: Correct config dependency of zynqmp_eemi_ops Link: https://lore.kernel.org/r/ecef6de5-8318-9f88-db8c-7c33fe44901f@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'at91-5.7-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc AT91 SoC for 5.7 - Rework PM to support sam9x60 * tag 'at91-5.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: add quirk for sam9x60's ulp1 ARM: at91: pm: add plla disable/enable support for sam9x60 clk: at91: move sam9x60's PLL register offsets to PMC header ARM: at91: pm: s/sfr/sfrbu in pm_suspend.S ARM: at91: pm: add pmc_version member to at91_pm_data ARM: at91: pm: add macros for plla disable/enable ARM: at91: pm: revert do not disable/enable PLLA for ULP modes ARM: at91: pm: use proper master clock register offset ARM: at91: Drop unneeded select of COMMON_CLK Link: https://lore.kernel.org/r/20200322090116.GA208895@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.7/pm33xx-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc PM changes for am335x and am437x for v5.7 merge window A series of changes from Dave Gerlach to enable basic cpuidle support for am335x and am437x based on generic cpuidle-arm driver. * tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE soc: ti: pm33xx: Add base cpuidle support ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x dt-bindings: arm: cpu: Add TI AM335x and AM437x enable method Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} buildPablo Neira Ayuso
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: noreply@ellerman.id.au Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25block: move the part_stat* helpers from genhd.h to a new headerChristoph Hellwig
These macros are just used by a few files. Move them out of genhd.h, which is included everywhere into a new standalone header. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: move block layer internals out of include/linux/genhd.hChristoph Hellwig
None of this needs to be exposed to drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-13 07:51:33 +0000