| Age | Commit message (Collapse) | Author |
|---|
|
Per Documentation/process/license-rules.rst, the SPDX MIT identifier is
equivalent to including the entire MIT license text from
LICENSES/preferred/MIT.
Replace the MIT license text with the equivalent SPDX identifier.
Link: https://lore.kernel.org/r/20230808223412.1743176-12-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
|
|
Linux 6.5-rc7
This is needed for the CI stuff and the msm pull has fixes in it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The binfmt_flat_fdpic code has a number of 32-bit specific data
structures associated with it. Extend it to be able to support and
be used on 64-bit systems as well.
The new code defines a number of key 64-bit variants of the core
elf-fdpic data structures - along side the existing 32-bit sized ones.
A common set of generic named structures are defined to be either
the 32-bit or 64-bit ones as required at compile time. This is a
similar technique to that used in the ELF binfmt loader.
For example:
elf_fdpic_loadseg is either elf32_fdpic_loadseg or elf64_fdpic_loadseg
elf_fdpic_loadmap is either elf32_fdpic_loadmap or elf64_fdpic_loadmap
the choice based on ELFCLASS32 or ELFCLASS64.
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230711130754.481209-2-gerg@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If the pages are in HIGHMEM then we need to make sure they're mapped
before trying to read data off of them, otherwise we could end up with a
NULL pointer dereference.
The downside to this is that we need an extra cleanup step at the end of
decode to kunmap() the last page. I introduced an xdr_finish_decode()
function to do this. Right now this function only calls the
unmap_current_page() function, but other generic cleanup steps could be
added in the future if we come across anything else.
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Tell listeners a new layout was introduced and is now available.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230823132744.350618-23-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, of_nvmem_layout_get_container() returns NULL on error, or an
error pointer if either CONFIG_NVMEM or CONFIG_OF is turned off. We
should likely avoid this kind of mix for two reasons: to clarify the
intend and anyway fix the !CONFIG_OF which will likely always if we use
this helper somewhere else. Let's just return NULL when no layout is
found, we don't need an error value here.
Link: https://staticthinking.wordpress.com/2022/08/01/mixing-error-pointers-and-null/
Fixes: 266570f496b9 ("nvmem: core: introduce NVMEM layouts")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202308030002.DnSFOrMB-lkp@intel.com/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230823132744.350618-21-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull filesystem freezing updates from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Back when set_fs() was a generic API for altering the address limit,
addr_limit_user_check() was a safety measure to prevent userspace being
able to issue syscalls with an unbound limit.
With the the removal of set_fs() as a generic API, the last user of
addr_limit_user_check() was removed in commit:
b5a5a01d8e9a44ec ("arm64: uaccess: remove addr_limit_user_check()")
... as since that commit, no architecture defines TIF_FSCHECK, and hence
addr_limit_user_check() always expands to nothing.
Remove addr_limit_user_check(), updating the comment in
exit_to_user_mode_prepare() to no longer refer to it. At the same time,
the comment is reworded to be a little more generic so as to cover
kmap_assert_nomap() in addition to lockdep_sys_exit().
No functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230821163526.2319443-1-mark.rutland@arm.com
|
|
After the conversion to use the auxiliary bus, the custom device
management is not needed anymore and can be deleted.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an auxiliary virtual bus to model the mlx4 driver structure. The
code is added along the current custom device management logic.
Subsequent patches switch mlx4_en and mlx4_ib to the auxiliary bus and
the old interface is then removed.
Structure mlx4_priv gains a new adev dynamic array to keep track of its
auxiliary devices. Access to the array is protected by the global
mlx4_intf mutex.
Functions mlx4_register_device() and mlx4_unregister_device() are
updated to expose auxiliary devices on the bus in order to load mlx4_en
and/or mlx4_ib. Functions mlx4_register_auxiliary_driver() and
mlx4_unregister_auxiliary_driver() are added to substitute
mlx4_register_interface() and mlx4_unregister_interface(), respectively.
Function mlx4_do_bond() is adjusted to walk over the adev array and
re-adds a specific auxiliary device if its driver sets the
MLX4_INTFF_BONDING flag.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function mlx4_en_queue_bond_work() is used in mlx4_en to start a bond
reconfiguration. It gathers data about a new port map setting, takes
a reference on the netdev that triggered the change and queues a work
object on mlx4_en_priv.mdev.workqueue to perform the operation. The
scheduled work is mlx4_en_bond_work() which calls
mlx4_bond()/mlx4_unbond() and consequently mlx4_do_bond().
At the same time, function mlx4_change_port_types() in mlx4_core might
be invoked to change the port type configuration. As part of its logic,
it re-registers the whole device by calling mlx4_unregister_device(),
followed by mlx4_register_device().
The two operations can result in concurrent access to the data about
currently active interfaces on the device.
Functions mlx4_register_device() and mlx4_unregister_device() lock the
intf_mutex to gain exclusive access to this data. The current
implementation of mlx4_do_bond() doesn't do that which could result in
an unexpected behavior. An updated version of mlx4_do_bond() for use
with an auxiliary bus goes and locks the intf_mutex when accessing a new
auxiliary device array.
However, doing so can then result in the following deadlock:
* A two-port mlx4 device is configured as an Ethernet bond.
* One of the ports is changed from eth to ib, for instance, by writing
into a mlx4_port<x> sysfs attribute file.
* mlx4_change_port_types() is called to update port types. It invokes
mlx4_unregister_device() to unregister the device which locks the
intf_mutex and starts removing all associated interfaces.
* Function mlx4_en_remove() gets invoked and starts destroying its first
netdev. This triggers mlx4_en_netdev_event() which recognizes that the
configured bond is broken. It runs mlx4_en_queue_bond_work() which
takes a reference on the netdev. Removing the netdev now cannot
proceed until the work is completed.
* Work function mlx4_en_bond_work() gets scheduled. It calls
mlx4_unbond() -> mlx4_do_bond(). The latter function tries to lock the
intf_mutex but that is not possible because it is held already by
mlx4_unregister_device().
This particular case could be possibly solved by unregistering the
mlx4_en_netdev_event() notifier in mlx4_en_remove() earlier, but it
seems better to decouple mlx4_en more and break this reference order.
Avoid then this scenario by recognizing that the bond reconfiguration
operates only on a mlx4_dev. The logic to queue and execute the bond
work can be moved into the mlx4_core driver. Only a reference on the
respective mlx4_dev object is needed to be taken during the work's
lifetime. This removes a call from mlx4_en that can directly result in
needing to lock the intf_mutex, it remains a privilege of the core
driver.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlx4_interface.activate callback was introduced in commit
79857cd31fe7 ("net/mlx4: Postpone the registration of net_device"). It
dealt with a situation when a netdev notifier received a NETDEV_REGISTER
event for a new net_device created by mlx4_en but the same device was
not yet visible to mlx4_get_protocol_dev(). The callback can be removed
now that mlx4_get_protocol_dev() is gone.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a notifier to implement mlx4_dispatch_event() in preparation to
switch mlx4_en and mlx4_ib to be an auxiliary device.
A problem is that if the mlx4_interface.event callback was replaced with
something as mlx4_adrv.event then the implementation of
mlx4_dispatch_event() would need to acquire a lock on a given device
before executing this callback. That is necessary because otherwise
there is no guarantee that the associated driver cannot get unbound when
the callback is running. However, taking this lock is not possible
because mlx4_dispatch_event() can be invoked from the hardirq context.
Using an atomic notifier allows the driver to accurately record when it
wants to receive these events and solves this problem.
A handler registration is done by both mlx4_en and mlx4_ib at the end of
their mlx4_interface.add callback. This matches the current situation
when mlx4_add_device() would enable events for a given device
immediately after this callback, by adding the device on the
mlx4_priv.list.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function mlx4_dispatch_event() takes an 'unsigned long' as its event
parameter. The actual value is none (MLX4_DEV_EVENT_CATASTROPHIC_ERROR),
a pointer to mlx4_eqe (MLX4_DEV_EVENT_PORT_MGMT_CHANGE), or a 32-bit
integer (remaining events).
In preparation to switch mlx4_en and mlx4_ib to be an auxiliary device,
the mlx4_interface.event callback is replaced with a notifier and
function mlx4_dispatch_event() gets updated to invoke
atomic_notifier_call_chain(). This requires forwarding the input 'param'
value from the former function to the latter. A problem is that the
notifier call takes 'void *' as its 'param' value, compared to
'unsigned long' used by mlx4_dispatch_event(). Re-passing the value
would need either punning it to 'void *' or passing down the address of
the input 'param'. Both approaches create a number of unnecessary casts.
Change instead the input 'param' of mlx4_dispatch_event() from
'unsigned long' to 'void *'. A mlx4_eqe pointer can be passed directly,
callers using an int value are adjusted to pass its address.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the mlx4 driver interface by removing mlx4_get_protocol_dev()
and the associated mlx4_interface.get_dev callbacks. This is done in
preparation to use an auxiliary bus to model the mlx4 driver structure.
The change is motivated by the following situation:
* The mlx4_en interface is being initialized by mlx4_en_add() and
mlx4_en_activate().
* The latter activate function calls mlx4_en_init_netdev() ->
register_netdev() to register a new net_device.
* A netdev event NETDEV_REGISTER is raised for the device.
* The netdev notififier mlx4_ib_netdev_event() is called and it invokes
mlx4_ib_scan_netdevs() -> mlx4_get_protocol_dev() ->
mlx4_en_get_netdev() [via mlx4_interface.get_dev].
This chain creates a problem when mlx4_en gets switched to be an
auxiliary driver. It contains two device calls which would both need to
take a respective device lock.
Avoid this situation by updating mlx4_ib_scan_netdevs() to no longer
call mlx4_get_protocol_dev() but instead to utilize the information
passed in net_device.parent and net_device.dev_port. This data is
sufficient to determine that an updated port is one that the mlx4_ib
driver should take care of and to keep mlx4_ib_dev.iboe.netdevs up to
date.
Following that, update mlx4_ib_get_netdev() to also not call
mlx4_get_protocol_dev() and instead scan all current netdevs to find
find a matching one. Note that mlx4_ib_get_netdev() is called early from
ib_register_device() and cannot use data tracked in
mlx4_ib_dev.iboe.netdevs which is not at that point yet set.
Finally, remove function mlx4_get_protocol_dev() and the
mlx4_interface.get_dev callbacks (only mlx4_en_get_netdev()) as they
became unused.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8cd160a29415 ("qede: convert to new udp_tunnel_nic infra")
removed qede_udp_tunnel_{add,del}() but not the declarations.
Commit 0ebcebbef1cc ("qed: Read device port count from the shmem")
removed qed_device_num_engines() but not its declaration.
Commit 1e128c81290a ("qed: Add support for hardware offloaded FCoE.")
declared but never implemented qed_fcoe_set_pf_params().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the btf returned from bpf_get_btf_vmlinux() only covers functions in
the vmlinux, BTF argument is not available on the functions in the modules.
Use bpf_find_btf_id() instead of bpf_get_btf_vmlinux()+btf_find_name_kind()
so that BTF argument can find the correct struct btf and btf_type in it.
With this fix, fprobe events can use `$arg*` on module functions as below
# grep nf_log_ip_packet /proc/kallsyms
ffffffffa0005c00 t nf_log_ip_packet [nf_log_syslog]
ffffffffa0005bf0 t __pfx_nf_log_ip_packet [nf_log_syslog]
# echo 'f nf_log_ip_packet $arg*' > dynamic_events
# cat dynamic_events
f:fprobes/nf_log_ip_packet__entry nf_log_ip_packet net=net pf=pf hooknum=hooknum skb=skb in=in out=out loginfo=loginfo prefix=prefix
To support the module's btf which is removable, the struct btf needs to be
ref-counted. So this also records the btf in the traceprobe_parse_context
and returns the refcount when the parse has done.
Link: https://lore.kernel.org/all/169272154223.160970.3507930084247934031.stgit@devnote2/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There are no MMP2, PXA168 or PXA910 boards still using board files which
would use these drivers, so remove them.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230804-drop-old-mmp-clk-v1-1-0c07db6cee90@skole.hr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Takao Orito <orito.takao@socionext.com>
Cc: Qin Jian <qinjian@cqplus1.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-sunxi@lists.linux.dev
Cc: linux-phy@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The valid values of policy.{min, max} should be between 'min' and 'max',
so use clamp() helper macro to makes cpufreq_verify_within_limits() easier
to follow.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some platforms a device and its corresponding PM domain, may need to
remain powered-on during system wide suspend, to support various use cases.
For example, when the console_suspend_enabled flag is unset for a serial
controller, the corresponding device may need to remain powered on. Other
use cases exists too.
In fact, we already have the mechanism in the PM core to deal with these
kind of use cases. However, the current naming of the corresponding
functions/flags clearly suggests these should be use for system wakeup.
See device_wakeup_path(), device_set_wakeup_path and
dev->power.wakeup_path.
As a way to extend the use of the existing mechanism, let's introduce two
new helpers functions, device_awake_path() and device_set_awake_path(). At
this point, let them act as wrappers of the existing functions. Ideally,
when all users have been converted to use the new helpers, we may decide to
drop the old ones and rename the flag.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, in an overlay fdt fragment, it needs to specify the exact
location in base DT. In another word, when the fdt fragment is generated,
the base DT location for the fragment is already known.
There is new use case that the base DT location is unknown when fdt
fragment is generated. For example, the add-on device provide a fdt
overlay with its firmware to describe its downstream devices. Because it
is add-on device which can be plugged to different systems, its firmware
will not be able to know the overlay location in base DT. Instead, the
device driver will load the overlay fdt and apply it to base DT at runtime.
In this case, of_overlay_fdt_apply() needs to be extended to specify
the target node for device driver to apply overlay fdt.
int overlay_fdt_apply(..., struct device_node *base);
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-5-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
of_changeset_create_node() creates device node dynamically and attaches
the newly created node to a changeset.
Expand of_changeset APIs to handle specific types of properties.
of_changeset_add_prop_string()
of_changeset_add_prop_string_array()
of_changeset_add_prop_u32_array()
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-2-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The kernel-doc script identified multiple issues in ieee80211.h, so
fix them. In the process update some references to the latest
applicable specification.
include/linux/ieee80211.h:848: warning: Function parameter or member 'count' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'period' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'duration' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'offset' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'token' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'mode' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'type' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'request' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'mode' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'new_ch_num' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'count' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'mode' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'new_operating_class' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'new_ch_num' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'count' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_ttl' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_flags' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_reason' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_pre_value' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_channel_width' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_center_freq_seg0' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_center_freq_seg1' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:926: warning: expecting prototype for struct ieee80211_tim. Prototype was for struct ieee80211_tim_ie instead
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_psel' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_pmetric' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_congest' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_synch' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_auth' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_form' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_cap' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:964: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* mesh channel switch parameters element's flag indicator
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_flags' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_hopcount' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_ttl' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_addr' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_seq' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_interval' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_metric' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:1019: warning: expecting prototype for enum ieee80211_opmode_bits. Prototype was for enum ieee80211_vht_opmode_bits instead
include/linux/ieee80211.h:1052: warning: Function parameter or member 'tx_power' not described in 'ieee80211_tpc_report_ie'
include/linux/ieee80211.h:1052: warning: Function parameter or member 'link_margin' not described in 'ieee80211_tpc_report_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'compat_info' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'beacon_int' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'tsf_completion' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'ch_width' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'oper_class' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'primary_ch' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'oper_ch' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'basic_mcs_nss' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'aid' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'switch_count' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'response_int' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_STATUS' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MINOR_REASON' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_CAPABILITY' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_DEVICE_ID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GO_INTENT' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_LISTEN_CHANNEL' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_BSSID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MANAGABILITY' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_CHANNEL_LIST' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_ABSENCE_NOTICE' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_DEVICE_INFO' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_INFO' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_ID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INTERFACE' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_OPER_CHANNEL' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INVITE_FLAGS' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_VENDOR_SPECIFIC' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MAX' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'frame_control' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'duration' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'ra' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'ta' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'control' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'start_seq_num' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1579: warning: Function parameter or member 'reserved' not described in 'ieee80211_mcs_info'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'ampdu_params_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'mcs' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'extended_ht_cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'tx_BF_cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'antenna_selection_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'primary_chan' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'ht_param' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'operation_mode' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'stbc_param' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'basic_set' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1872: warning: Function parameter or member 'mac_cap_info' not described in 'ieee80211_he_cap_elem'
include/linux/ieee80211.h:1872: warning: Function parameter or member 'phy_cap_info' not described in 'ieee80211_he_cap_elem'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'he_oper_params' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'he_mcs_nss_set' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'optional' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1948: warning: Function parameter or member 'he_sr_control' not described in 'ieee80211_he_spr'
include/linux/ieee80211.h:1948: warning: Function parameter or member 'optional' not described in 'ieee80211_he_spr'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'aifsn' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'ecw_min_max' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'mu_edca_timer' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'mu_qos_info' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_be' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_bk' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_vi' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_vo' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_LPI_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_SP_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_VLP_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_SP' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_VLP' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_LPI' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2577: warning: cannot understand function prototype: 'struct ieee80211_he_6ghz_oper '
include/linux/ieee80211.h:2624: warning: Function parameter or member 'tx_power_info' not described in 'ieee80211_tx_pwr_env'
include/linux/ieee80211.h:2624: warning: Function parameter or member 'tx_power' not described in 'ieee80211_tx_pwr_env'
include/linux/ieee80211.h:4485: warning: expecting prototype for RSNX Capabilities(). Prototype was for WLAN_RSNX_CAPA_PROTECTED_TWT() instead
include/linux/ieee80211.h:4734: warning: expecting prototype for ieee80211_mle_get_eml_sync_delay(). Prototype was for ieee80211_mle_get_eml_med_sync_delay() instead
117 warnings as Errors
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230822-kerneldoc-v1-1-0d42ce5029bf@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
pm_runtime_update_max_time_suspended()
Commit 76e267d822f2 ("PM / Runtime: Remove device fields related to
suspend time, v2") left behind this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Extend the SED block driver so it can alternatively
obtain a key from a sed-opal kernel keyring. The SED
ioctls will indicate the source of the key, either
directly in the ioctl data or from the keyring.
This allows the use of SED commands in scripts such as
udev scripts so that drives may be automatically unlocked
as they become available.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230721211534.3437070-4-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is used in conjunction with IOC_OPAL_REVERT_TPR to return a drive to
Original Factory State without erasing the data. If IOC_OPAL_REVERT_LSP
is called with opal_revert_lsp.options bit OPAL_PRESERVE set prior
to calling IOC_OPAL_REVERT_TPR, the drive global locking range will not
be erased.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230721211534.3437070-3-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add IOC_OPAL_DISCOVERY ioctl to return raw discovery data to a SED Opal
application. This allows the application to display drive capabilities
and state.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230721211534.3437070-2-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 84427943d2da ("greybus: svc: drop legacy-protocol dependency")
removed these implementations but not the declarations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230818124338.37880-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v6.6
Detailed description for this pull request:
- Remove unused deprecated exported function
: extcon_register_interest/extcon_unregister_interest are replaced with
extcon_register_notifier/extcon_unregister_notifier.
- Add missing property for extcon max77843 / sm5502 devicectree binding doc
: max77843 / sm5502 extcon driver uses the 'schemas/connector/usb-connector.yaml'
for device binding. So add the missing property information.
- Add mising POWER_SUPPLY config depencenty to extcon-intel-cht-wc.c in order to
remove build error.
* tag 'extcon-next-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: cht_wc: add POWER_SUPPLY dependency
dt-bindings: extcon: siliconmitus,sm5502-muic: document connector
dt-bindings: extcon: maxim,max77843: restrict connector properties
extcon: Remove unused inline functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresigh: Updates for v6.6
Coresight and hwtracing subsystem updates for Linux v6.6 includes:
- ACPI support for CoreSight ETMv4x via system instructions and Arm ETE (v9.x).
- Fix potential sleeping in atomic context for TRBE driver
- Fix memory leak in ACPI platform parsing code
- Fix all warnings with W=1
- Fix warning with double free attempt for TRBE platform data
- Miscellaneous cleanups and fixes
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: trbe: Fix TRBE potential sleep in atomic context
coresight: Fix memory leak in acpi_buffer->pointer
coresight: etm4x: Ensure valid drvdata and clock before clk_put()
coresight: trbe: Allocate platform data per device
hwtracing: hisi_ptt: Use pci_dev_id() to simplify the code
coresight: dummy: simplify the code with module_platform_driver
coresight: tmc: Explicit type conversions to prevent integer overflow
coresight: trbe: Directly use ID_AA64DFR0_EL1_TraceBuffer_IMP
coresight: Fix all W=1 build warnings
coresight: etm4x: Add ACPI support in platform driver
coresight: platform: acpi: Ignore the absence of graph
coresight: etm4x: Change etm4_platform_driver driver for MMIO devices
coresight: etm4x: Drop pid argument from etm4_probe()
coresight: etm4x: Drop iomem 'base' argument from etm4_probe()
coresight: etm4x: Allocate and device assign 'struct etmv4_drvdata' earlier
hwtracing: coresight: Explicitly include correct DT includes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.6 cycle
This set consists primarily of minor clean-ups. The counter_priv()
'const' attribute change does yield a small improvement in reducing
the binary size.
Changes
* rz-mtu3-cnt
- Reorder locking sequence for consistency
* Documentation
- sysfs-bus-counter: Fix indentation
* counter
- Declare counter_priv() to be const
* microchip-tcb-capture
- Explicitly include correct DT includes
* tag 'counter-updates-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: rz-mtu3-cnt: Reorder locking sequence for consistency
Documentation: ABI: sysfs-bus-counter: Fix indentation
counter: Declare counter_priv() to be const
counter: Explicitly include correct DT includes
|
|
Use __tty_insert_flip_string_flags() for the slow path of
tty_insert_flip_char(). The former is generic enough, so there is no
reason to reimplement the injection once again.
So now we have a single function stuffing into tty buffers.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The same as in the previous patch, tty_prepare_flip_string() accepts
size_t as an size argument. It returns the same size (or less). It is
unexpected that it returns a signed value and can confuse users to check
for negative values.
Instead, return the same size_t as accepted to make clear we return
values >= 0, where zero in fact means failure.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All the functions accept size_t as a size argument. They finally return
the same size (or less). It is quite unexpected that they return a
signed value and can confuse users to check for negative values.
Instead, return the same size_t as accepted to make clear we return
values >= 0, where zero in fact means failure.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
They both do the same except for flags. One mem-copies the flags from
the caller, the other mem-sets to one flag given by the caller. This can
be unified with a simple if in the unified function.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no reason to have tty_buffer::data typed as unsigned long.
Switch to u8, but preserve the ulong alignment using __aligned.
This allows for the cast removal from char_buf_ptr(). And for use of
struct_size() in the allocation in tty_buffer_alloc() -- in the next
patch.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According the "USB Type-C Port Controller Interface Specification v2.0"
the TCPC sets the fault status register bit-7
(AllRegistersResetToDefault) once the registers have been reset to
their default values.
This triggers an alert(-irq) on PTN5110 devices albeit we do mask the
fault-irq, which may cause a kernel hang. Fix this generically by writing
a one to the corresponding bit-7.
Cc: stable@vger.kernel.org
Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Reported-by: "Angus Ainslie (Purism)" <angus@akkea.ca>
Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/
Reported-by: Christian Bach <christian.bach@scs.ch>
Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.
Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver.
Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC. The chain is currently based of Lee's for-mfd-next
branch.
This series is mostly just a resend keeping pace with the kernel under
it, except for a minor fixup in the ASoC stuff.
Thanks,
Charles
Charles Keepax (4):
dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding
mfd: cs42l43: Add support for cs42l43 core driver
pinctrl: cs42l43: Add support for the cs42l43
ASoC: cs42l43: Add support for the cs42l43
Lucas Tanure (2):
soundwire: bus: Allow SoundWire peripherals to register IRQ handlers
spi: cs42l43: Add SPI controller support
.../bindings/sound/cirrus,cs42l43.yaml | 313 +++
MAINTAINERS | 4 +
drivers/mfd/Kconfig | 23 +
drivers/mfd/Makefile | 3 +
drivers/mfd/cs42l43-i2c.c | 98 +
drivers/mfd/cs42l43-sdw.c | 239 ++
drivers/mfd/cs42l43.c | 1188 +++++++++
drivers/mfd/cs42l43.h | 28 +
drivers/pinctrl/cirrus/Kconfig | 11 +
drivers/pinctrl/cirrus/Makefile | 2 +
drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 609 +++++
drivers/soundwire/bus.c | 32 +
drivers/soundwire/bus_type.c | 12 +
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-cs42l43.c | 284 ++
include/linux/mfd/cs42l43-regs.h | 1184 +++++++++
include/linux/mfd/cs42l43.h | 102 +
include/linux/soundwire/sdw.h | 9 +
include/sound/cs42l43.h | 17 +
sound/soc/codecs/Kconfig | 16 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/cs42l43-jack.c | 946 +++++++
sound/soc/codecs/cs42l43-sdw.c | 74 +
sound/soc/codecs/cs42l43.c | 2278 +++++++++++++++++
sound/soc/codecs/cs42l43.h | 131 +
26 files changed, 7615 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
create mode 100644 drivers/mfd/cs42l43-i2c.c
create mode 100644 drivers/mfd/cs42l43-sdw.c
create mode 100644 drivers/mfd/cs42l43.c
create mode 100644 drivers/mfd/cs42l43.h
create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c
create mode 100644 drivers/spi/spi-cs42l43.c
create mode 100644 include/linux/mfd/cs42l43-regs.h
create mode 100644 include/linux/mfd/cs42l43.h
create mode 100644 include/sound/cs42l43.h
create mode 100644 sound/soc/codecs/cs42l43-jack.c
create mode 100644 sound/soc/codecs/cs42l43-sdw.c
create mode 100644 sound/soc/codecs/cs42l43.c
create mode 100644 sound/soc/codecs/cs42l43.h
--
2.30.2
|
|
ftrace_disable_daemon()
The definition of ftrace_enable_daemon() and ftrace_disable_daemon() has
been removed since commit cb7be3b2fc2c ("ftrace: remove daemon"), remain
the declarations in the header files, so remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20230804013636.115940-1-zhangzekun11@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The recently introduced ipi_send_cpumask trace event contains a cpumask
field, but it currently cannot be used in filter expressions.
Make event filtering aware of cpumask fields, and allow these to be
filtered by a user-provided cpumask.
The user-provided cpumask is to be given in cpulist format and wrapped as:
"CPUS{$cpulist}". The use of curly braces instead of parentheses is to
prevent predicate_parse() from parsing the contents of CPUS{...} as a
full-fledged predicate subexpression.
This enables e.g.:
$ trace-cmd record -e 'ipi_send_cpumask' -f 'cpumask & CPUS{2,4,6,8-32}'
Link: https://lkml.kernel.org/r/20230707172155.70873-3-vschneid@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Leonardo Bras <leobras@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Instead of bypassing the kernel's adaptation layer for performing EFI
runtime calls, wire up ACPI PRM handling into it. This means these calls
can no longer occur concurrently with EFI runtime calls, and will be
made from the EFI runtime workqueue. It also means any page faults
occurring during PRM handling will be identified correctly as
originating in firmware code.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Avoid duplicating the EFI arch setup and teardown routine calls numerous
times in efi_call_rts(). Instead, expand the efi_call_virt_pointer()
macro into efi_call_rts(), taking the pre and post parts out of the
switch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
__efi_call_virt() exists as an alternative for efi_call_virt() for the
sole reason that ResetSystem() returns void, and so we cannot use a call
to it in the RHS of an assignment.
Given that there is only a single user, let's drop the macro, and expand
it into the caller. That way, the remaining macro can be tightened
somewhat in terms of type safety too.
Note that the use of typeof() on the runtime service invocation does not
result in an actual call being made, but it does require a few pointer
types to be fixed up and converted into the proper function pointer
prototypes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Most fscrypt-enabled filesystems store the crypto context in an xattr,
but that's problematic for ceph as xatts are governed by the XATTR cap,
but we really want the crypto context as part of the AUTH cap.
Because of this, the MDS has added two new inode metadata fields:
fscrypt_auth and fscrypt_file. The former is used to hold the crypto
context, and the latter is used to track the real file size.
Parse new fscrypt_auth and fscrypt_file fields in inode traces. For now,
we don't use fscrypt_file, but fscrypt_auth is used to hold the fscrypt
context.
Allow the client to use a setattr request for setting the fscrypt_auth
field. Since this is not a standard setattr request from the VFS, we add
a new field to __ceph_setattr that carries ceph-specific inode attrs.
Have the set_context op do a setattr that sets the fscrypt_auth value,
and get_context just return the contents of that field (since it should
always be available).
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add an iov_iter to the unions in ceph_msg_data and ceph_msg_data_cursor.
Instead of requiring a list of pages or bvecs, we can just use an
iov_iter directly, and avoid extra allocations.
We assume that the pages represented by the iter are pinned such that
they shouldn't incur page faults, which is the case for the iov_iters
created by netfs.
While working on this, Al Viro informed me that he was going to change
iov_iter_get_pages to auto-advance the iterator as that pattern is more
or less required for ITER_PIPE anyway. We emulate that here for now by
advancing in the _next op and tracking that amount in the "lastlen"
field.
In the event that _next is called twice without an intervening
_advance, we revert the iov_iter by the remaining lastlen before
calling iov_iter_get_pages.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Have get_reply check for the presence of sparse read ops in the
request and set the sparse_read boolean in the msg. That will queue the
messenger layer to use the sparse read codepath instead of the normal
data receive.
Add a new sparse_read operation for the OSD client, driven by its own
state machine. The messenger will repeatedly call the sparse_read
operation, and it will pass back the necessary info to set up to read
the next extent of data, while zero-filling the sparse regions.
The state machine will stop at the end of the last extent, and will
attach the extent map buffer to the ceph_osd_req_op so that the caller
can use it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add 2 new fields to ceph_connection_v1_info to track the necessary info
in sparse reads. Skip initializing the cursor for a sparse read.
Break out read_partial_message_section into a wrapper around a new
read_partial_message_chunk function that doesn't zero out the crc first.
Add new helper functions to drive receiving into the destinations
provided by the sparse_read state machine.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add support for a new sparse_read ceph_connection operation. The idea is
that the client driver can define this operation use it to do special
handling for incoming reads.
The alloc_msg routine will look at the request and determine whether the
reply is expected to be sparse. If it is, then we'll dispatch to a
different set of state machine states that will repeatedly call the
driver's sparse_read op to get length and placement info for reading the
extent map, and the extents themselves.
This necessitates adding some new field to some other structs:
- The msg gets a new bool to track whether it's a sparse_read request.
- A new field is added to the cursor to track the amount remaining in the
current extent. This is used to cap the read from the socket into the
msg_data
- Handing a revoke with all of this is particularly difficult, so I've
added a new data_len_remain field to the v2 connection info, and then
use that to skip that much on a revoke. We may want to expand the use of
that to the normal read path as well, just for consistency's sake.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
