| Age | Commit message (Collapse) | Author |
|---|
|
Most configuration of SPI offloads is handled opaquely using the offload
pointer that is passed to the various offload functions. However, there
are some offload features that need to be controlled on a per transfer
basis.
This patch adds a flag field to struct spi_transfer to allow specifying
such features. The first feature to be added is the ability to stream
data to/from a hardware sink/source rather than using a tx or rx buffer.
Additional flags can be added in the future as needed.
A flags field is also added to the offload struct for providers to
indicate which flags are supported. This allows for generic checking of
offload capabilities during __spi_validate() so that each offload
provider doesn't have to implement their own validation.
As a first users of this streaming capability, getter functions are
added to get a DMA channel that is directly connected to the offload.
Peripheral drivers will use this to get a DMA channel and configure it
to suit their needs.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-5-e48a489be48c@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend SPI offloading to support hardware triggers.
This allows an arbitrary hardware trigger to be used to start a SPI
transfer that was previously set up with spi_optimize_message().
A new struct spi_offload_trigger is introduced that can be used to
configure any type of trigger. It has a type discriminator and a union
to allow it to be extended in the future. Two trigger types are defined
to start with. One is a trigger that indicates that the SPI peripheral
is ready to read or write data. The other is a periodic trigger to
repeat a SPI message at a fixed rate.
There is also a spi_offload_hw_trigger_validate() function that works
similar to clk_round_rate(). It basically asks the question of if we
enabled the hardware trigger what would the actual parameters be. This
can be used to test if the requested trigger type is actually supported
by the hardware and for periodic triggers, it can be used to find the
actual rate that the hardware is capable of.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-2-e48a489be48c@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the basic infrastructure to support SPI offload providers and
consumers.
SPI offloading is a feature that allows the SPI controller to perform
transfers without any CPU intervention. This is useful, e.g. for
high-speed data acquisition.
SPI controllers with offload support need to implement the get_offload
and put_offload callbacks and can use the devm_spi_offload_alloc() to
allocate offload instances.
SPI peripheral drivers will call devm_spi_offload_get() to get a
reference to the matching offload instance. This offload instance can
then be attached to a SPI message to request offloading that message.
It is expected that SPI controllers with offload support will check for
the offload instance in the SPI message in the ctlr->optimize_message()
callback and handle it accordingly.
CONFIG_SPI_OFFLOAD is intended to be a select-only option. Both
consumer and provider drivers should `select SPI_OFFLOAD` in their
Kconfig to ensure that the SPI core is built with offload support.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-1-e48a489be48c@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mhi_device_get() and mhi_queue_dma() haven't been used since 2020's
commit 189ff97cca53 ("bus: mhi: core: Add support for data transfer")
added them.
Remove them.
Note that mhi_queue_dma_sync() is used and has been left.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250127215859.261105-1-linux@treblig.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix fsnotify FMODE_NONOTIFY* handling.
This also disables fsnotify on all pseudo files by default apart from
very select exceptions. This carries a regression risk so we need to
watch out and adapt accordingly. However, it is overall a significant
improvement over the current status quo where every rando file can
get fsnotify enabled.
- Cleanup and simplify lockref_init() after recent lockref changes.
- Fix vboxfs build with gcc-15.
- Add an assert into inode_set_cached_link() to catch corrupt links.
- Allow users to also use an empty string check to detect whether a
given mount option string was empty or not.
- Fix how security options were appended to statmount()'s ->mnt_opt
field.
- Fix statmount() selftests to always check the returned mask.
- Fix uninitialized value in vfs_statx_path().
- Fix pidfs_ioctl() sanity checks to guard against ioctl() overloading
and preserve extensibility.
* tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: sanity check the length passed to inode_set_cached_link()
pidfs: improve ioctl handling
fsnotify: disable pre-content and permission events by default
selftests: always check mask returned by statmount(2)
fsnotify: disable notification by default for all pseudo files
fs: fix adding security options to statmount.mnt_opt
fsnotify: use accessor to set FMODE_NONOTIFY_*
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
statmount: let unset strings be empty
vboxsf: fix building with GCC 15
fs/stat.c: avoid harmless garbage value problem in vfs_statx_path()
|
|
The sysctl_vfs_cache_pressure belongs to fs/dcache.c, move it to
fs/dcache.c from kernel/sysctl.c. As a part of fs/dcache.c cleaning,
sysctl_vfs_cache_pressure is changed to a static variable, and change
the inline-type function vfs_pressure_ratio() to out-of-inline type,
export vfs_pressure_ratio() with EXPORT_SYMBOL_GPL to be used by other
files. Move the unneeded include(linux/dcache.h).
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
The sysctl_drop_caches to fs/drop_caches.c, move it to
fs/drop_caches.c from /kernel/sysctl.c. And remove the
useless extern variable declaration from include/linux/mm.h
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
The dirtytime_expire_interval belongs to fs/fs-writeback.c, move it to
fs/fs-writeback.c from /kernel/sysctl.c. And remove the useless extern
variable declaration and the function declaration from
include/linux/writeback.h
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
The sysctl_nr_trim_pages belongs to nommu.c, move it to mm/nommu.c
from /kernel/sysctl.c. And remove the useless extern variable declaration
from include/linux/mm.h
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
This moves all util related sysctls to mm/util.c, as part of the
kernel/sysctl.c cleaning, also removes redundant external
variable declarations and function declarations.
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
This moves vm_swappiness and zone_reclaim_mode to mm/vmscan.c,
as part of the kernel/sysctl.c cleaning, also moves some external
variable declarations and function declarations from include/linux/swap.h
into mm/internal.h.
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
The page-cluster belongs to mm/swap.c, move it to mm/swap.c .
Removes the redundant external variable declaration and unneeded
include(linux/swap.h).
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
This moves the filemap related sysctl to mm/filemap.c, and
removes the redundant external variable declaration.
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
This moves all vmstat related sysctls to its own file, removes useless
extern variable declarations, and do some related clean-ups. To avoid
compiler warnings when CONFIG_PROC_FS is not defined, add the macro
definition CONFIG_PROC_FS ahead CONFIG_NUMA in vmstat.c.
Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
For main items, separate warning of reserved item tag from
warning of unknown item tag.
This comes from 6.2.2.4 Main Items of Device Class Definition
for HID 1.11 specification.
Signed-off-by: Tatsuya S <tatsuya.s2862@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There are lot of drivers using of_get_child_by_name() followed by
of_device_is_available() to find the available child node by name for a
given parent. Provide a helper for these users to simplify the code.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the clone side already executes pid allocation with only pidmap_lock
held, issuing free_pid() while still holding tasklist_lock exacerbates
total hold time of the latter.
More things may show up later which require initial clean up with the
lock held and allow finishing without it. For that reason a struct to
collect such work is added instead of merely passing the pid array.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250206164415.450051-5-mjguzik@gmail.com
Acked-by: "Liam R. Howlett" <Liam.Howlett@Oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This costs a strlen() call when instatianating a symlink.
Preferably it would be hidden behind VFS_WARN_ON (or compatible), but
there is no such facility at the moment. With the facility in place the
call can be patched out in production kernels.
In the meantime, since the cost is being paid unconditionally, use the
result to a fixup the bad caller.
This is not expected to persist in the long run (tm).
Sample splat:
bad length passed for symlink [/tmp/syz-imagegen43743633/file0/file0] (got 131109, expected 37)
[rest of WARN blurp goes here]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250204213207.337980-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The FMODE_NONOTIFY_* bits are a 2-bits mode. Open coding manipulation
of those bits is risky. Use an accessor file_set_fsnotify_mode() to
set the mode.
Rename file_set_fsnotify_mode() => file_set_fsnotify_mode_from_watchers()
to make way for the simple accessor name.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All users of lockref_init() now initialize the count to 1, so hardcode
that and remove the count argument.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Link: https://lore.kernel.org/r/20250130135624.1899988-4-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove the now unused helper, cpufreq_enable_boost_support().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
policy_has_boost_freq() isn't used outside of freq_table.c now, mark it
static.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It is possible to have a scenario where not all cpufreq policies support
boost frequencies. And letting sysfs (or other parts of the kernel)
enable boost feature for that policy isn't correct.
Add a new flag, boost_supported, which will be set to true by the
cpufreq core only if the freq table contains valid boost frequencies.
Some cpufreq drivers though don't have boost frequencies in the
freq-table, they can set this flag from their ->init() callbacks.
Once all the drivers are updated to set the flag correctly, we can check
it before enabling boost feature for a policy.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This will be used directly by cpufreq driver going forward, export it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
cpufreq_boost_trigger_state() is only used by cpufreq core, mark it
static.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
All users of cpufreq_generic_attr are migrated now, remove it. While at
it, also stop exporting attributes for available and boost frequencies
as they are only used by cpufreq core now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
The destination argument of memtostr*() and strtomem*() must be a
fixed-size char array at compile time, so there is no need to use
__builtin_object_size() (which is useful for when an argument is
either a pointer or unknown). Instead use ARRAY_SIZE(), which has the
benefit of working around a bug in Clang (fixed[1] in 15+) that got
__builtin_object_size() wrong sometimes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501310832.kiAeOt2z-lkp@intel.com/
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://github.com/llvm/llvm-project/commit/d8e0a6d5e9dd2311641f9a8a5d2bf90829951ddc [1]
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In preparation for adding stricter type checking to the str/mem*()
helpers, provide a way to check that a variable is a byte array
via __must_be_byte_array().
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The C kernel helpers for evaluating C Strings were positioned where they
were visible to assembly inclusion, which was not intended. Move them
into the kernel and C-only area of the header so future changes won't
confuse the assembler.
Fixes: d7a516c6eeae ("compiler.h: Fix undefined BUILD_BUG_ON_ZERO()")
Fixes: 559048d156ff ("string: Check for "nonstring" attribute on strscpy() arguments")
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: managing MSI-X in driver
Michal Swiatkowski says:
It is another try to allow user to manage amount of MSI-X used for each
feature in ice. First was via devlink resources API, it wasn't accepted
in upstream. Also static MSI-X allocation using devlink resources isn't
really user friendly.
This try is using more dynamic way. "Dynamic" across whole kernel when
platform supports it and "dynamic" across the driver when not.
To achieve that reuse global devlink parameter pf_msix_max and
pf_msix_min. It fits how ice hardware counts MSI-X. In case of ice amount
of MSI-X reported on PCI is a whole MSI-X for the card (with MSI-X for
VFs also). Having pf_msix_max allow user to statically set how many
MSI-X he wants on PF and how many should be reserved for VFs.
pf_msix_min is used to set minimum number of MSI-X with which ice driver
should probe correctly.
Meaning of this field in case of dynamic vs static allocation:
- on system with dynamic MSI-X allocation support
* alloc pf_msix_min as static, rest will be allocated dynamically
- on system without dynamic MSI-X allocation support
* try alloc pf_msix_max as static, minimum acceptable result is
pf_msix_min
As Jesse and Piotr suggested pf_msix_max and pf_msix_min can (an
probably should) be stored in NVM. This patchset isn't implementing
that.
Dynamic (kernel or driver) way means that splitting MSI-X across the
RDMA and eth in case there is a MSI-X shortage isn't correct. Can work
when dynamic is only on driver site, but can't when dynamic is on kernel
site.
Let's remove this code and move to MSI-X allocation feature by feature.
If there is no more MSI-X for a feature, a feature is working with less
MSI-X or it is turned off.
There is a regression here. With MSI-X splitting user can run RDMA and
eth even on system with not enough MSI-X. Now only eth will work. RDMA
can be turned on by changing number of PF queues (lowering) and reprobe
RDMA driver.
Example:
72 CPU number, eth, RDMA and flow director (1 MSI-X), 1 MSI-X for OICR
on PF, and 1 more for RDMA. Card is using 1 + 72 + 1 + 72 + 1 = 147.
We set pf_msix_min = 2, pf_msix_max = 128
OICR: 1
eth: 72
flow director: 1
RDMA: 128 - 74 = 54
We can change number of queues on pf to 36 and do devlink reinit
OICR: 1
eth: 36
RDMA: 73
flow director: 1
We can also (implemented in "ice: enable_rdma devlink param") turned
RDMA off.
OICR: 1
eth: 72
RDMA: 0 (turned off)
flow director: 1
After this changes we have a static base vector for SRIOV (SIOV probably
in the feature). Last patch from this series is simplifying managing VF
MSI-X code based on static vector.
Now changing queues using ethtool is also changing MSI-X. If there is
enough MSI-X it is always one to one. When there is not enough there
will be more queues than MSI-X.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: init flow director before RDMA
ice: simplify VF MSI-X managing
ice: enable_rdma devlink param
ice: treat dyn_allowed only as suggestion
ice, irdma: move interrupts code to irdma
ice: get rid of num_lan_msix field
ice: remove splitting MSI-X between features
ice: devlink PF MSI-X max and min parameter
ice: count combined queues using Rx/Tx count
====================
Link: https://patch.msgid.link/20250205185512.895887-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->nd_net can change, readers should either
use rcu_read_lock() or RTNL.
We currently use a generic helper, dev_net() with
no debugging support. We probably have many hidden bugs.
Add dev_net_rcu() helper for callers using rcu_read_lock()
protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the declaration of cxl_cper_print_prot_err() to include/linux/cper.h
to avoid maintaining a separate header file just for this function
declaration. Remove drivers/firmware/efi/cper_cxl.h as its contents have
been reorganized.
No functional changes.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250123084421.127697-4-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In preparation to add tracepoint support, move protocol error UUID
definition to a common location, Also, make struct CXL RAS capability,
cxl_cper_sec_prot_err and CPER validation flags global for use across
different modules.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250123084421.127697-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Interestingly the recent kmemleak improvements allowed our CI to catch
a couple of percpu leaks addressed here.
We (mostly Jakub, to be accurate) are working to increase review
coverage over the net code-base tweaking the MAINTAINER entries.
Current release - regressions:
- core: harmonize tstats and dstats
- ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
- eth: tun: revert fix group permission check
- eth: stmmac: revert "specify hardware capability value when FIFO
size isn't specified"
Previous releases - regressions:
- udp: gso: do not drop small packets when PMTU reduces
- rxrpc: fix race in call state changing vs recvmsg()
- eth: ice: fix Rx data path for heavy 9k MTU traffic
- eth: vmxnet3: fix tx queue race condition with XDP
Previous releases - always broken:
- sched: pfifo_tail_enqueue: drop new packet when sch->limit == 0
- ethtool: ntuple: fix rss + ring_cookie check
- rxrpc: fix the rxrpc_connection attend queue handling
Misc:
- recognize Kuniyuki Iwashima as a maintainer"
* tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
MAINTAINERS: add a sample ethtool section entry
MAINTAINERS: add entry for ethtool
rxrpc: Fix race in call state changing vs recvmsg()
rxrpc: Fix call state set to not include the SERVER_SECURING state
net: sched: Fix truncation of offloaded action statistics
tun: revert fix group permission check
selftests/tc-testing: Add a test case for qdisc_tree_reduce_backlog()
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
selftests/tc-testing: Add a test case for pfifo_head_drop qdisc when limit==0
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
selftests: mptcp: connect: -f: no reconnect
net: rose: lock the socket in rose_bind()
net: atlantic: fix warning during hot unplug
rxrpc: Fix the rxrpc_connection attend queue handling
net: harmonize tstats and dstats
selftests: drv-net: rss_ctx: don't fail reconfigure test if queue offset not supported
selftests: drv-net: rss_ctx: add missing cleanup in queue reconfigure
ethtool: ntuple: fix rss + ring_cookie check
ethtool: rss: fix hiding unsupported fields in dumps
...
|
|
Allow the file system to pass private data which can be used by the
iomap_begin and iomap_end methods through the private pointer in the
iomap_iter structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-12-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow the file system to pass private data which can be used by the
iomap_begin and iomap_end methods through the private pointer in the
iomap_iter structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-11-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow the file system to pass private data which can be used by the
iomap_begin and iomap_end methods through the private pointer in the
iomap_iter structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-10-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a private data field to struct iomap_ioend so that the file system
can attach information to it. Zoned XFS will use this for a pointer to
the open zone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-9-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
struct iomap_ioend currently tracks outstanding buffered writes and has
some really nice code in core iomap and XFS to merge contiguous I/Os
an defer them to userspace for completion in a very efficient way.
For zoned writes we'll also need a per-bio user context completion to
record the written blocks, and the infrastructure for that would look
basically like the ioend handling for buffered I/O.
So instead of reinventing the wheel, reuse the existing infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-8-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Provide helpers for file systems to split bios in the direct I/O and
writeback I/O submission handlers. The split ioends are chained to
the parent ioend so that only the parent ioend originally generated
by the iomap layer will be processed after all the chained off children
have completed. This is based on the block layer bio chaining that has
supported a similar mechanism for a long time.
This Follows btrfs' lead and don't try to build bios to hardware limits
for zone append commands, but instead build them as normal unconstrained
bios and split them to the hardware limits in the I/O submission handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-5-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a IOMAP_F_ANON_WRITE flag that indicates that the write I/O does not
have a target block assigned to it yet at iomap time and the file system
will do that in the bio submission handler, splitting the I/O as needed.
This is used to implement Zone Append based I/O for zoned XFS, where
splitting writes to the hardware limits and assigning a zone to them
happens just before sending the I/O off to the block layer, but could
also be useful for other things like compressed I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-4-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The ioend fields for distinct types of I/O are a bit complicated.
Consolidate them into a single io_flag field with it's own flags
decoupled from the iomap flags. This also prepares for adding a new
flag that is unrelated to both of the iomap namespaces.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-3-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Change ->prepare_ioend to ->submit_ioend and require file systems that
implement it to submit the bio. This is needed for file systems that
do their own work on the bios before submitting them to the block layer
like btrfs or zoned xfs. To make this easier also pass the writeback
context to the method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250206064035.2323428-2-hch@lst.de
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove reconfigure_single, mount_single, and compare_single now
that no users remain.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/20250205213931.74614-5-sandeen@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This patch exposes new link modes using 200Gbps per lane, including
200G, 400G and 800G modes.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add new devcom component for hardware clock. When it is running in
real time mode, the functions are grouped by the identify they query.
According to firmware document, the clock identify size is 64 bits, so
it's safe to memcpy to component key, as the key size is also 64 bits.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change clock member in mlx5_core_dev to a pointer, so it can point to
a clock shared by multiple functions in later patch.
For now, each function has its own clock, so mdev in mlx5_clock_priv
is the back pointer to the function. Later it points to one (normally
the first one) of the multiple functions sharing the same clock.
Change mlx5_init_clock() to return error if mlx5_clock is not
allocated. Besides, a null clock is defined and used when hardware
clock is not supported. So, the clock pointer is always pointing to
something valid.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rx/tx queues embed their own kobject for registering their per-queue
sysfs files. The issue is they're using the kobject default groups for
this and entirely rely on the kobject refcounting for releasing their
sysfs paths.
In order to remove rtnl_trylock calls we need sysfs files not to rely on
their associated kobject refcounting for their release. Thus we here
move queues sysfs files from the kobject default groups to their own
groups which can be removed separately.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-3-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an ABBA deadlock between net device unregistration and sysfs
files being accessed[1][2]. To prevent this from happening all paths
taking the rtnl lock after the sysfs one (actually kn->active refcount)
use rtnl_trylock and return early (using restart_syscall)[3], which can
make syscalls to spin for a long time when there is contention on the
rtnl lock[4].
There are not many possibilities to improve the above:
- Rework the entire net/ locking logic.
- Invert two locks in one of the paths — not possible.
But here it's actually possible to drop one of the locks safely: the
kernfs_node refcount. More details in the code itself, which comes with
lots of comments.
Note that we check the device is alive in the added sysfs_rtnl_lock
helper to disallow sysfs operations to run after device dismantle has
started. This also help keeping the same behavior as before. Because of
this calls to dev_isalive in sysfs ops were removed.
[1] https://lore.kernel.org/netdev/49A4D5D5.5090602@trash.net/
[2] https://lore.kernel.org/netdev/m14oyhis31.fsf@fess.ebiederm.org/
[3] https://lore.kernel.org/netdev/20090226084924.16cb3e08@nehalam/
[4] https://lore.kernel.org/all/20210928125500.167943-1-atenart@kernel.org/T/
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-2-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
