| Age | Commit message (Collapse) | Author |
|---|
|
We need the IIO fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- Add lockdep_assert(once) helpers.
Core Changes:
- Add lockdep assert to drm_is_current_master_locked.
- Fix typos in dma-buf documentation.
- Mark drm irq midlayer as legacy only.
- Fix GPF in udmabuf_create.
- Rename member to correct value in drm_edid.h
Driver Changes:
- Build fix to make nouveau build with NOUVEAU_BACKLIGHT.
- Add MI101AIT-ICP1, LTTD800480070-L6WWH-RT panels.
- Assorted fixes to bridge/it66121, anx7625.
- Add custom crtc_state to simple helpers, and use it to
convert pll handling in mgag200 to atomic.
- Convert drivers to use offset-adjusted framebuffer bo mappings.
- Assorted small fixes and fix for a use-after-free in vmwgfx.
- Convert remaining callers of non-legacy drivers to use linux irqs directly.
- Small cleanup in ingenic.
- Small fixes to virtio and ti-sn65dsi86.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1cf2d7fc-402d-1852-574a-21cbbd2eaebf@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for PCI/MSI and x86 interrupt startup:
- Mask all MSI-X entries when enabling MSI-X otherwise stale unmasked
entries stay around e.g. when a crashkernel is booted.
- Enforce masking of a MSI-X table entry when updating it, which
mandatory according to speification
- Ensure that writes to MSI[-X} tables are flushed.
- Prevent invalid bits being set in the MSI mask register
- Properly serialize modifications to the mask cache and the mask
register for multi-MSI.
- Cure the violation of the affinity setting rules on X86 during
interrupt startup which can cause lost and stale interrupts. Move
the initial affinity setting ahead of actualy enabling the
interrupt.
- Ensure that MSI interrupts are completely torn down before freeing
them in the error handling case.
- Prevent an array out of bounds access in the irq timings code"
* tag 'irq-urgent-2021-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: Add missing kernel doc for device::msi_lock
genirq/msi: Ensure deactivation on teardown
genirq/timings: Prevent potential array overflow in __irq_timings_store()
x86/msi: Force affinity setup before startup
x86/ioapic: Force affinity setup before startup
genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP
PCI/MSI: Protect msi_desc::masked for multi-MSI
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
PCI/MSI: Correct misleading comments
PCI/MSI: Do not set invalid bits in MSI mask
PCI/MSI: Enforce MSI[X] entry updates to be visible
PCI/MSI: Enforce that MSI-X table entry is masked for update
PCI/MSI: Mask all unused MSI-X entries
PCI/MSI: Enable and mask MSI-X early
|
|
Commit 41a9ada3e6b4253f ("of/fdt: mark hotpluggable memory") introduced
two (for systems with and without memblock) weak versions of
early_init_dt_mark_hotplug_memory_arch(), that could be overridden by an
architecture-specific version. However, no overrides ever emerged.
Later, commit aca52c3983891060 ("mm: remove CONFIG_HAVE_MEMBLOCK")
removed the non-memblock version.
Remove early_init_dt_mark_hotplug_memory_arch(), and replace it by a
direct call to memblock_mark_hotplug().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1a61f75ec50d3c2922fcdbe33337266a58a4125f.1628671960.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit e7ae8d174eec0b3b ("MIPS: replace add_memory_region with
memblock") removed the last architecture-specific override of
early_init_dt_reserve_memory_arch().
Convert the common implementation from a weak global function to a
static function.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/be0140a0183ecfd0a3afa4fe6d2d77ed418102f9.1628671897.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This patch implements the BPF iterator for the UNIX domain socket.
Currently, the batch optimisation introduced for the TCP iterator in the
commit 04c7820b776f ("bpf: tcp: Bpf iter batching and lock_sock") is not
used for the UNIX domain socket. It will require replacing the big lock
for the hash table with small locks for each hash list not to block other
processes.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210814015718.42704-2-kuniyu@amazon.co.jp
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new IIO and counter device support, cleanups and features for 5.15
Usual mix of cleanups and new device support.
Counter
======
Cleanups and refactoring:
* treewide
- Ensure attempts to set invalid modes result in -EINVAL return.
- Rename counter_count_function to counter_function as the middle count
is redundant.
- Standardize error returns when limits are exceeded.
* 104-quad:
- Document the lock.
- Return an error if attempt to set the ceiling value in a mode that
doesn't support it.
* intel-qep
- Drop unused bitops.h include
IIO
===
New device support
* bma255
- Add support fo the bosch,bmc156_accel which oddly only exposes the INT2
interrupt pin and not INT1. Patch set includes enabling use of INT2.
* ingenic_adc
- Add support for JZ4760 and similar and update bindings
- Add support for JZ4760B and update bindings
* rockchip_saradc
- Add support for rk3568 ADC (separate channel array as more channels)
* sgp40 gas sensor used to measure air quality
- New driver including binding and ABI documentation.
Bindings
--------
* Add missing bindings for many DACs where the binding was effectively
implicit due to fallback probe methods in I2C and SPI.
adi,ad5064
adi,ad5360
adi,ad5380
adi,ad5421
adi,ad5449
adi,ad5504
adi,ad5624r
adi,ad5686 / adi,ad5696
adi,ad5761
adi,ad5764
adi,ad5791
adi,ad8801
capella,cm3323 (also add explicit of_device_id table)
microchip,mcp4922
* bosch,bma255
- Interrupt type in example was opposite of what the device expects.
It's possible that a particular board had an inverter, but we
definitely don't want the example to suggest this would be normal.
- Add interrupt-names to allow for cases where only INT2 is connected.
- Sort compatibles
- Merge in very similar bosch,bma180 binding.
New feature
-----------
* Devices only allowed to provide either extended_name or a label for given
channel. If extend_name is used (generally discouraged but can't be
removed as it would be a userspaece ABI change), then the label sysfs
attribute will provide the extended_name. This allows some userspace
parser simplications and hardening.
* hid-sensors-pres
- Add a timestamp channel (either from hardware, or locally filled).
* vcnl3020
- Add periodic sensor mode used to provide IIO events.
Cleanups / minor fixes
----------------------
* core/buffers
- Avoid unnecessary zeroing of bitmaps that are immediately overwritten.
- Move a sanity check earlier to simplify error path.
* Quite a few cases of refactors to use devm_* for all of probe and drop
remove
- adjd_s311
- adxl345
- bma220
- da280
- dmard10
- ds311
- max5481
- max5821
- rfd77402
- tcs3414
- tmp006
* ad5624r
- Fix incorrect handling of a regulator that was preventing use of
internal regulators.
* adjd_s311
- Allocate a buffer as part of iio_priv() structure as maximum size
is small enough, no significant advantage in making it flexible sized.
* bma220
- Make handling of suspend and resume closer to the probe() wrt to the
rather odd interface, that suspend mode is entered by reading a register.
* ep93xx
- Prepare clock before using (part of conversion to CCF)
* fsl-imx25-gcq
- Use local device pointer.
- Adjust handling of platform_get_irq() to not check for 0 as an error.
The function is documented as never returning it.
* hid-sensors
- Use devm_kmemdup() consistently across all drivers to simplify channel
structure allocation management.
* meson-saradc
- Drop BL30 integration on G12A and newer SoCs as not used.
- Whitespace fixes.
* mpu6050
- Add per device type startup times. This avoids an issue with having
to dsicard initial data from gyroscopes when they were still stabilizing.
* rfd77402
- Change from passing private data, to passing i2c_client where only
that is needed, reducing back and forth in pm functions.
* si1145
- Drop pointless continue
* st-sensors
- Cleanup of includes to remove unused and add missing headers that are used.
- Use some devm functions to simplify probe() and remove() - gets us part way
towards a fully device managed driver.
* sx9310
- Switch from of to generic properties to enable ACPI bindings.
* vcnl3020
- Add DMA safe buffer for bulk transfers.
- Drop use of iio_claim_direct() in a driver that has no mode changes.
A local lock is more appropriate.
* tag 'iio-for-5.15a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (77 commits)
counter: 104-quad-8: Describe member 'lock' in 'quad8'
iio: hid-sensor-press: Add timestamp channel
counter: Rename counter_count_function to counter_function
counter: Rename counter_signal_value to counter_signal_level
counter: Standardize to ERANGE for limit exceeded errors
counter: Return error code on invalid modes
counter: 104-quad-8: Return error when invalid mode during ceiling_write
iio: accel: bmc150: Add support for BMC156
iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel
dt-bindings: iio: accel: bma255: Add interrupt-names
iio: light: cm3323: Add of_device_id table
dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor
iio: chemical: Add driver support for sgp40
dt-bindings: iio: chemical: Add trivial DT binding for sgp40
iio: ep93xx: Prepare clock before using it
iio: adc: fsl-imx25-gcq: adjust irq check to match docs and simplify code
iio: dac: max5821: convert device register to device managed function
dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
iio/adc: ingenic: add JZ4760B support to the sadc driver
...
|
|
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts
to produce Open Channel SSDs and never made it into the NVMe spec
proper. They have since been superceeded by NVMe enhancements such
as ZNS support. Remove the support per the deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix a misspelling of the word "callbacks".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/ae38372996a23bb67769e2d62ca170ae9457c4df.1626261946.git.geert+renesas@glider.be
|
|
There are two pairs of declarations for thermal_cooling_device_register()
and thermal_of_cooling_device_register(), and only one set was changed
in a recent patch, so the other one now causes a compile-time warning:
drivers/net/wireless/mediatek/mt76/mt7915/init.c: In function 'mt7915_thermal_init':
drivers/net/wireless/mediatek/mt76/mt7915/init.c:134:48: error: passing argument 1 of 'thermal_cooling_device_register' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
134 | cdev = thermal_cooling_device_register(wiphy_name(wiphy), phy,
| ^~~~~~~~~~~~~~~~~
In file included from drivers/net/wireless/mediatek/mt76/mt7915/init.c:7:
include/linux/thermal.h:407:39: note: expected 'char *' but argument is of type 'const char *'
407 | thermal_cooling_device_register(char *type, void *devdata,
| ~~~~~~^~~~
Change the dummy helper functions to have the same arguments as the
normal version.
Fixes: f991de53a8ab ("thermal: make device_register's type argument const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210722090717.1116748-1-arnd@kernel.org
|
|
This extends the struct power_supply_battery_info with a
"technology" field makes the core DT parser optionally obtain
this from the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
These can only return 0 for failure or the number of entries, so turn
the return value into an unsigned int.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
|
|
The 'imply' keyword does not do what most people think it does, it only
politely asks Kconfig to turn on another symbol, but does not prevent
it from being disabled manually or built as a loadable module when the
user is built-in. In the ICE driver, the latter now causes a link failure:
aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl':
ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config'
ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config'
aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config'
ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config'
aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset':
ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release'
ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release'
aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild':
This is a recurring problem in many drivers, and we have discussed
it several times befores, without reaching a consensus. I'm providing
a link to the previous email thread for reference, which discusses
some related problems.
To solve the dependency issue better than the 'imply' keyword, introduce a
separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver
can depend on if it is able to use PTP support when available, but works
fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are
then prevented from being built-in, the same way as with a 'depends on
PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick,
but that can be rather confusing when you first see it.
Since this should cover the dependencies correctly, the IS_REACHABLE()
hack in the header is no longer needed now, and can be turned back
into a normal IS_ENABLED() check. Any driver that gets the dependency
wrong will now cause a link time failure rather than being unable to use
PTP support when that is in a loadable module.
However, the two recently added ptp_get_vclocks_index() and
ptp_convert_timestamp() interfaces are only called from builtin code with
ethtool and socket timestamps, so keep the current behavior by stubbing
those out completely when PTP is in a loadable module. This should be
addressed properly in a follow-up.
As Richard suggested, we may want to actually turn PTP support into a
'bool' option later on, preventing it from being a loadable module
altogether, which would be one way to solve the problem with the ethtool
interface.
Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices")
Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/
Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/
Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/
Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/
Acked-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the obsolete and ambiguos macro in_irq() with new
macro in_hardirq().
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Link: https://lore.kernel.org/r/20210813145749.86512-1-changbin.du@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Immutable branch between regulator and power-supply for for 5.15
This immutable branch introduces the MT6360 charger driver,
which requires a new linear range helper.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
|
|
Add linear range get selector within for choose closest selector
between minimum and maximum selector.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp")
9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins")
099fdeda659d ("bnxt_en: Event handler for PPS events")
kernel/bpf/helpers.c
include/linux/bpf-cgroup.h
a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()")
c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current")
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray")
2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer")
MAINTAINERS
7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo")
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
usb_endpoint_maxp() already returns actual max packet size, no need
to AND 0x7ff.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-7-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes: 77e89afc25f3 ("PCI/MSI: Protect msi_desc::masked for multi-MSI")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
and list
The existing cpumap_print_to_pagebuf() is used by cpu topology and other
drivers to export hexadecimal bitmask and decimal list to userspace by
sysfs ABI.
Right now, those drivers are using a normal attribute for this kind of
ABIs. A normal attribute typically has show entry as below:
static ssize_t example_dev_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
...
return cpumap_print_to_pagebuf(true, buf, &pmu_mmdc->cpu);
}
show entry of attribute has no offset and count parameters and this
means the file is limited to one page only.
cpumap_print_to_pagebuf() API works terribly well for this kind of
normal attribute with buf parameter and without offset, count:
static inline ssize_t
cpumap_print_to_pagebuf(bool list, char *buf, const struct cpumask *mask)
{
return bitmap_print_to_pagebuf(list, buf, cpumask_bits(mask),
nr_cpu_ids);
}
The problem is once we have many cpus, we have a chance to make bitmask
or list more than one page. Especially for list, it could be as complex
as 0,3,5,7,9,...... We have no simple way to know it exact size.
It turns out bin_attribute is a way to break this limit. bin_attribute
has show entry as below:
static ssize_t
example_bin_attribute_show(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t offset, size_t count)
{
...
}
With the new offset and count parameters, this makes sysfs ABI be able
to support file size more than one page. For example, offset could be
>= 4096.
This patch introduces cpumap_print_bitmask/list_to_buf() and their bitmap
infrastructure bitmap_print_bitmask/list_to_buf() so that those drivers
can move to bin_attribute to support large bitmask and list. At the same
time, we have to pass those corresponding parameters such as offset, count
from bin_attribute to this new API.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: "Ma, Jianpeng" <jianpeng.ma@intel.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20210806110251.560-2-song.bao.hua@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.15-1
* Rework DesignWare driver to use software nodes instead of platform data
* Drop duplication of forward declaration for ACPI in consumer.h
* Get rid of legacy PCI PM code in ML IOH driver
The following is an automated git shortlog grouped by driver:
dwapb:
- Get rid of legacy platform data
- Read GPIO base from gpio-base property
- Unify ACPI enumeration checks in get_irq() and configure_irqs()
gpiolib:
- Deduplicate forward declaration in the consumer.h header
mfd:
- intel_quark_i2c_gpio: Convert GPIO to use software nodes
ml-ioh:
- Convert to dev_pm_ops
|
|
Allow archs to create arch-specific nodes under kvm->debugfs_dentry directory
besides the stats fields. The new interface kvm_arch_create_vm_debugfs() is
defined but not yet used. It's called after kvm->debugfs_dentry is created, so
it can be referenced directly in kvm_arch_create_vm_debugfs(). Arch should
define their own versions when they want to create extra debugfs nodes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210730220455.26054-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
UART block is a part of USI (Universal Serial Interface) IP-core in
Samsung SoCs since Exynos9810 (e.g. in Exynos850). USI allows one to
enable one of three types of serial interface: UART, SPI or I2C. That's
possible because USI shares almost all internal circuits within each
protocol. USI also provides some additional registers so it's possible
to configure it.
One USI register called USI_OPTION has reset value of 0x0. Because of
this the clock gating behavior is controlled by hardware (HWACG =
Hardware Auto Clock Gating), which simply means the serial won't work
after reset as is. In order to make it work, USI_OPTION[2:1] bits must
be set to 0b01, so that HWACG is controlled manually (by software).
Bits meaning:
- CLKREQ_ON = 1: clock is continuously provided to IP
- CLKSTOP_ON = 0: drive IP_CLKREQ to High (needs to be set along with
CLKREQ_ON = 1)
USI is not present on older chips, like s3c2410, s3c2412, s3c2440,
s3c6400, s5pv210, exynos5433, exynos4210. So the new boolean field
'.has_usi' was added to struct s3c24xx_uart_info. USI registers will be
only actually accessed when '.has_usi' field is set to "1".
This feature is needed for further serial enablement on Exynos850, but
some other new Exynos chips (like Exynos9810) may benefit from this
feature as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20210811114827.27322-5-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The same as for I²C Serial Bus resource split and export
serdev_acpi_get_uart_resource(). We have already a few users
one of which is converted here.
Rationale of this is to consolidate parsing UART Serial Bus
resource in one place as it's done, e.g., for I²C Serial Bus.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210806111736.66591-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the permission checks in notify_change into a separate function to
make them available to filesystems.
When notify_change is called, the vfs performs those checks before
calling into iop->setattr. However, a filesystem like gfs2 can only
lock and revalidate the inode inside ->setattr, and it must then repeat
those checks to err on the safe side.
It would be nice to get rid of the double checking, but moving the
permission check into iop->setattr altogether isn't really an option.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, bpf, can and
ieee802154.
The size of this is pretty normal, but we got more fixes for 5.14
changes this week than last week. Nothing major but the trend is the
opposite of what we like. We'll see how the next week goes..
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid dma
mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across
suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via
netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is
out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans on idle systems to
prevent frequent wake ups"
* tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
vsock/virtio: avoid potential deadlock when vsock device remove
wwan: core: Avoid returning NULL from wwan_create_dev()
net: dsa: sja1105: unregister the MDIO buses during teardown
Revert "tipc: Return the correct errno code"
net: mscc: Fix non-GPL export of regmap APIs
net: igmp: increase size of mr_ifc_count
MAINTAINERS: switch to my OMP email for Renesas Ethernet drivers
tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
net: pcs: xpcs: fix error handling on failed to allocate memory
net: linkwatch: fix failure to restore device state across suspend/resume
net: bridge: fix memleak in br_add_if()
net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
net: bridge: fix flags interpretation for extern learn fdb entries
net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
bpf, core: Fix kernel-doc notation
net: igmp: fix data-race in igmp_ifc_timer_expire()
net: Fix memory leak in ieee802154_raw_deliver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
soc: Keystone SOC drivers for v5.15
The pull request contains:
- ICSSG subsystem support for Keystone3 AM64x SOCs
- Removes smartrefelx PM dependency for deeper low power states
* tag 'drivers_soc_for_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
Link: https://lore.kernel.org/r/0A637A41-2353-4900-962C-DBE50BBDE75A@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.15
Few minor fixes: maintainer pattern, unused-function warning in
Tegra186 and suspend/resume in OMAP GPMC.
* tag 'memory-controller-drv-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: omap-gpmc: Drop custom PM calls with cpu_pm notifier
memory: omap-gpmc: Clear GPMC_CS_CONFIG7 register on restore if unused
MAINTAINERS: update arm,pl353-smc.yaml reference
memory: tegra: fix unused-function warning
Link: https://lore.kernel.org/r/20210809152639.110576-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The newly introduced POWER_OF_TWO_PS flag, when set, makes the flow
to skip the assumption that the caller will use an additional 2^scale
prescaler to get the desired clock rate.
Reported-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210812170025.67074-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The providers are all located in drivers/clk/ and hence no need
to export the clock operations to wider audience. Hide them by
moving to drivers/clk/clk-fractional-divider.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210812170025.67074-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Now that struct pci_vpd is really small, simplify the code by embedding
struct pci_vpd directly in struct pci_dev instead of dynamically allocating
it.
Link: https://lore.kernel.org/r/d898489e-22ba-71f1-2f31-f1a78dc15849@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Just check inode_unhashed on the whole device bdev inode instead,
and provide a helper to check for that information.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have 3 files now which have the need to count the number of
I2cSerialBus resources in an ACPI-device's resource-list.
Currently all implement their own helper function for this,
add a generic helper function to replace the 3 implementations.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210803160044.158802-2-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
|
|
The X13 Flow laptops can utilise an external GPU. This requires
toggling an ACPI method which will first disable the internal
dGPU, and then enable the eGPU.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210807023656.25020-4-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In Windows the ASUS Armory Crate program can enable or disable the
dGPU via a WMI call. This functions much the same as various Linux
methods in software where the dGPU is removed from the device tree.
However the WMI call saves the state of dGPU (enabled or not) and
this then changes the dGPU visibility in Linux with no way for
Linux users to re-enable it. We expose the WMI method so users can
see and change the dGPU ACPI state.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210807023656.25020-3-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some ASUS ROG laptops have the ability to drive the display panel
a higher rate to eliminate or reduce ghosting.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210807023656.25020-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Apple's DART iommu uses a pagetable format that shares some
similarities with the ones already implemented by io-pgtable.c.
Add a new format variant to support the required differences
so that we don't have to duplicate the pagetable handling code.
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210803121651.61594-2-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Many cpufreq drivers register with the energy model for each policy and
do exactly the same thing. Follow the footsteps of thermal-cooling, to
get it done from the cpufreq core itself.
Provide a new callback, which will be called, if present, by the cpufreq
core at the right moment (more on that in the code's comment). Also
provide a generic implementation that uses dev_pm_opp_of_register_em().
This also allows us to register with the EM at a later point of time,
compared to ->init(), from where the EM core can access cpufreq policy
directly using cpufreq_cpu_get() type of helpers and perform other work,
like marking few frequencies inefficient, this will be done separately.
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Move them (PAGE_SECTORS_SHIFT, PAGE_SECTORS and SECTOR_MASK) to the
generic header file to remove redundancy.
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Link: https://lore.kernel.org/r/20210721025315.1729118-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.
Fixes: 4a2b285e7e10 ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently mlx5_core_dev contains array of capabilities. It contains 19
valid capabilities of the device, 2 reserved entries and 12 holes.
Due to this for 14 unused entries, mlx5_core_dev allocates 14 * 8K = 112K
bytes of memory which is never used. Due to this mlx5_core_dev structure
size is 270Kbytes odd. This allocation further aligns to next power of 2
to 512Kbytes.
By skipping non-existent entries,
(a) 112Kbyte is saved,
(b) mlx5_core_dev reduces to 8KB with alignment
(c) 350KB saved in alignment
In future individual capability allocation can be used to skip its
allocation when such capability is disabled at the device level. This
patch prepares mlx5_core_dev to hold capability using a pointer instead
of inline array.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the current code, the current and maximal capabilities are
maintained in separate arrays which are both per type. In order to
allow the creation of such a basic structure as a dynamically
allocated array, we move curr and max fields to a unified
structure so that specific capabilities can be allocated as one unit.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
New mlx5_core device structure is allocated through devlink_alloc
with\ kzalloc and that ensures that all fields are equal to zero
and it includes ->state too.
That means that checks of that field in the mlx5_init_one() is
completely redundant, because that function is called only once
in the begging of mlx5_core_dev lifetime.
PCI:
.probe()
-> probe_one()
-> mlx5_init_one()
The recovery flow can't run at that time or before it, because relevant
work initialized later in mlx5_init_once().
Such initialization flow ensures that dev->state can't be
MLX5_DEVICE_STATE_UNINITIALIZED at all, so remove such impossible
checks.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix typo:
*vectores ==> vectors
*realeased ==> released
*erros ==> errors
*namepsace ==> namespace
*trafic ==> traffic
*proccessed ==> processed
*retore ==> restore
*Currenlty ==> Currently
*crated ==> created
*chane ==> change
*cannnot ==> cannot
*usuallly ==> usually
*failes ==> fails
*importent ==> important
*reenabled ==> re-enabled
*alocation ==> allocation
*recived ==> received
*tanslation ==> translation
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
resctrl_arch_get_config() has no return, but does pass a single value
back via one of its arguments.
Return the value instead.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210811163831.14917-1-james.morse@arm.com
|
|
resctrl uses cbm_idx() to map a closid to an index in the configuration
array. This is based on a multiplier and offset that are held in the
resource.
To merge the resources, the resctrl arch code needs to calculate the
index from something else, as there will only be one resource.
Decide based on the staged configuration type. This makes the static
mult and offset parameters redundant.
[ bp: Remove superfluous brackets in get_config_index() ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-21-james.morse@arm.com
|
|
The ctrl_val[] array for a struct rdt_hw_resource only holds
configurations of one type. The type is implicit.
Once the CDP resources are merged, the ctrl_val[] array will hold all
the configurations for the hardware resource. When a particular type of
configuration is needed, it must be specified explicitly.
Pass the expected type from the schema into resctrl_arch_get_config().
Nothing uses this yet, but once a single ctrl_val[] array is used for
the three struct rdt_hw_resources that share hardware, the type will be
used to return the correct configuration value from the shared array.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-18-james.morse@arm.com
|
|
Nothing uses this anymore, delete it.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/14-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Currently the driver ops have an open/release pair that is called once
each time a device FD is opened or closed. Add an additional set of
open/close_device() ops which are called when the device FD is opened for
the first time and closed for the last time.
An analysis shows that all of the drivers require this semantic. Some are
open coding it as part of their reflck implementation, and some are just
buggy and miss it completely.
To retain the current semantics PCI and FSL depend on, introduce the idea
of a "device set" which is a grouping of vfio_device's that share the same
lock around opening.
The device set is established by providing a 'set_id' pointer. All
vfio_device's that provide the same pointer will be joined to the same
singleton memory and lock across the whole set. This effectively replaces
the oddly named reflck.
After conversion the set_id will be sourced from:
- A struct device from a fsl_mc_device (fsl)
- A struct pci_slot (pci)
- A struct pci_bus (pci)
- The struct vfio_device (everything)
The design ensures that the above pointers are live as long as the
vfio_device is registered, so they form reliable unique keys to group
vfio_devices into sets.
This implementation uses xarray instead of searching through the driver
core structures, which simplifies the somewhat tricky locking in this
area.
Following patches convert all the drivers.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This pairs with vfio_init_group_dev() and allows undoing any state that is
stored in the vfio_device unrelated to registration. Add appropriately
placed calls to all the drivers.
The following patch will use this to add pre-registration state for the
device set.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
