| Age | Commit message (Collapse) | Author |
|---|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restrict range element expansion in ipset to avoid soft lockup,
from Jozsef Kadlecsik.
2) Memleak in error path for nf_conntrack_bridge for IPv4 packets,
from Yajun Deng.
3) Simplify conntrack garbage collection strategy to avoid frequent
wake-ups, from Florian Westphal.
4) Fix NFNLA_HOOK_FUNCTION_NAME string, do not include module name.
5) Missing chain family netlink attribute in chain description
in nfnetlink_hook.
6) Incorrect sequence number on nfnetlink_hook dumps.
7) Use netlink request family in reply message for consistency.
8) Remove offload_pickup sysctl, use conntrack for established state
instead, from Florian Westphal.
9) Translate NFPROTO_INET/ingress to NFPROTO_NETDEV/ingress, since
NFPROTO_INET is not exposed through nfnetlink_hook.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nfnetlink_hook: translate inet ingress to netdev
netfilter: conntrack: remove offload_pickup sysctl again
netfilter: nfnetlink_hook: Use same family as request message
netfilter: nfnetlink_hook: use the sequence number of the request message
netfilter: nfnetlink_hook: missing chain family
netfilter: nfnetlink_hook: strip off module name from hookfn
netfilter: conntrack: collect all entries in one cycle
netfilter: nf_conntrack_bridge: Fix memory leak when error
netfilter: ipset: Limit the maximal range of consecutive elements to add/delete
====================
Link: https://lore.kernel.org/r/20210806151149.6356-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
u32 is a type that is used for properties retrieval from DT.
With the type change it allows to clean up properties reading routine.
While at it, order the fields in way how they are parsed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20210802184355.49879-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Energy Model (EM) provides useful information about device power in
each performance state to other subsystems like: Energy Aware Scheduler
(EAS). The energy calculation in EAS does arithmetic operation based on
the EM em_cpu_energy(). Current implementation of that function uses
em_perf_state::cost as a pre-computed cost coefficient equal to:
cost = power * max_frequency / frequency.
The 'power' is expressed in milli-Watts (or in abstract scale).
There are corner cases when the EAS energy calculation for two Performance
Domains (PDs) return the same value. The EAS compares these values to
choose smaller one. It might happen that this values are equal due to
rounding error. In such scenario, we need better resolution, e.g. 1000
times better. To provide this possibility increase the resolution in the
em_perf_state::cost for 64-bit architectures. The cost of increasing
resolution on 32-bit is pretty high (64-bit division) and is not justified
since there are no new 32bit big.LITTLE EAS systems expected which would
benefit from this higher resolution.
This patch allows to avoid the rounding to milli-Watt errors, which might
occur in EAS energy estimation for each PD. The rounding error is common
for small tasks which have small utilization value.
There are two places in the code where it makes a difference:
1. In the find_energy_efficient_cpu() where we are searching for
best_delta. We might suffer there when two PDs return the same result,
like in the example below.
Scenario:
Low utilized system e.g. ~200 sum_util for PD0 and ~220 for PD1. There
are quite a few small tasks ~10-15 util. These tasks would suffer for
the rounding error. These utilization values are typical when running games
on Android. One of our partners has reported 5..10mA less battery drain
when running with increased resolution.
Some details:
We have two PDs: PD0 (big) and PD1 (little)
Let's compare w/o patch set ('old') and w/ patch set ('new')
We are comparing energy w/ task and w/o task placed in the PDs
a) 'old' w/o patch set, PD0
task_util = 13
cost = 480
sum_util_w/o_task = 215
sum_util_w_task = 228
scale_cpu = 1024
energy_w/o_task = 480 * 215 / 1024 = 100.78 => 100
energy_w_task = 480 * 228 / 1024 = 106.87 => 106
energy_diff = 106 - 100 = 6
(this is equal to 'old' PD1's energy_diff in 'c)')
b) 'new' w/ patch set, PD0
task_util = 13
cost = 480 * 1000 = 480000
sum_util_w/o_task = 215
sum_util_w_task = 228
energy_w/o_task = 480000 * 215 / 1024 = 100781
energy_w_task = 480000 * 228 / 1024 = 106875
energy_diff = 106875 - 100781 = 6094
(this is not equal to 'new' PD1's energy_diff in 'd)')
c) 'old' w/o patch set, PD1
task_util = 13
cost = 160
sum_util_w/o_task = 283
sum_util_w_task = 293
scale_cpu = 355
energy_w/o_task = 160 * 283 / 355 = 127.55 => 127
energy_w_task = 160 * 296 / 355 = 133.41 => 133
energy_diff = 133 - 127 = 6
(this is equal to 'old' PD0's energy_diff in 'a)')
d) 'new' w/ patch set, PD1
task_util = 13
cost = 160 * 1000 = 160000
sum_util_w/o_task = 283
sum_util_w_task = 293
scale_cpu = 355
energy_w/o_task = 160000 * 283 / 355 = 127549
energy_w_task = 160000 * 296 / 355 = 133408
energy_diff = 133408 - 127549 = 5859
(this is not equal to 'new' PD0's energy_diff in 'b)')
2. Difference in the 6% energy margin filter at the end of
find_energy_efficient_cpu(). With this patch the margin comparison also
has better resolution, so it's possible to have better task placement
thanks to that.
Fixes: 27871f7a8a341ef ("PM: Introduce an Energy Model management framework")
Reported-by: CCJ Yeh <CCj.Yeh@mediatek.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The memslot for a given gfn is looked up multiple times during page
fault handling. Avoid binary searching for it multiple times by caching
the most recently used slot. There is an existing VM-wide last_used_slot
but that does not work well for cases where vCPUs are accessing memory
in different slots (see performance data below).
Another benefit of caching the most recently use slot (versus looking
up the slot once and passing around a pointer) is speeding up memslot
lookups *across* faults and during spte prefetching.
To measure the performance of this change I ran dirty_log_perf_test with
64 vCPUs and 64 memslots and measured "Populate memory time" and
"Iteration 2 dirty memory time". Tests were ran with eptad=N to force
dirty logging to use fast_page_fault so its performance could be
measured.
Config | Metric | Before | After
---------- | ----------------------------- | ------ | ------
tdp_mmu=Y | Populate memory time | 6.76s | 5.47s
tdp_mmu=Y | Iteration 2 dirty memory time | 2.83s | 0.31s
tdp_mmu=N | Populate memory time | 20.4s | 18.7s
tdp_mmu=N | Iteration 2 dirty memory time | 2.65s | 0.30s
The "Iteration 2 dirty memory time" results are especially compelling
because they are equivalent to running the same test with a single
memslot. In other words, fast_page_fault performance no longer scales
with the number of memslots.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make search_memslots unconditionally search all memslots and move the
last_used_slot logic up one level to __gfn_to_memslot. This is in
preparation for introducing a per-vCPU last_used_slot.
As part of this change convert existing callers of search_memslots to
__gfn_to_memslot to avoid making any functional changes.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
lru_slot is used to keep track of the index of the most-recently used
memslot. The correct acronym would be "mru" but that is not a common
acronym. So call it last_used_slot which is a bit more obvious.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core driver-core-next
sysfs: Allow deferred execution of iomem_get_mapping()
Tag for toerh trees/branches to pull from in order to have a stable base
to build off of for the "Allow deferred execution of
iomem_get_mapping()" set of sysfs changes
Link: https://lore.kernel.org/r/20210729233235.1508920-1-kw@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'sysfs_defferred_iomem_get_mapping-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
|
|
Add rpm smd clocks, PMIC and bus clocks which are required on SM6125
for clients to vote on.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210730215924.733350-2-martin.botka@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The definition of CLK_MULTIPLIER_ROUND_CLOSEST is not aligned to the two
bit definitions next to it. A deeper inspection reveals that the
alignment of CLK_MULTIPLIER_ROUND_CLOSEST does match the most common
alignment.
Align the bit definitions for the various provider types throughout the
file at 40 columns, to increase uniformity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5468cd9e50cda8fc59cb6baab9413c6c0de1a974.1626257689.git.geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Build failure in drivers/net/wwan/mhi_wwan_mbim.c:
add missing parameter (0, assuming we don't want buffer pre-alloc).
Conflict in drivers/net/dsa/sja1105/sja1105_main.c between:
589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode")
Follow the instructions from the commit message of the former commit
- removed the if conditions. When looking at commit 589918df9322 ("net:
dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
note that the mask_iotag fields get removed by the following patch.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This callback will allow to notify representors about relevant events
when in OFFLOADS mode. In downstream patches, this will be used to notify
about PAIR/UNPAIR devcom events.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In shared FDB there is only one eswitch which is active and it receives
traffic from all representors and all vports in the HCA.
While the Ethernet representor will always reside on its native PF
the IB representor will not. Extend send to vport rule creation to
support such flows. Need to account for source vport that sends the
traffic (on which the representors resides) and the target eswitch
the traffic which reach.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
As shared FDB requires changes in two subsystems first expose the needed
core functions so the RDMA side can be changed.
mlx5_lag_is_master(): return true if a given mlx5 device is the lag master.
mlx5_lag_is_shared_fdb(): Returns true if the lag mode is shared FDB.
mlx5_lag_get_peer_mdev(): Return the peer mdev in lag.
The mentioned functions will be used by downstream patches in order
to add support for shared FDB for the RDMA side.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Export a function so users can retrieve the mellanox device that manages
the eswitch from the eswitch device.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Several gpiolib functions receive pointer to struct device_node which is
later passed to OF functions. These OF functions accept already pointer
to const, so gpiolib can follow similar approach to indicate they are
not modifying the struct device_node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Unify the declaration of of_count_phandle_with_args() between enabled
and disabled OF by making constifying pointed device_node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
elevator_get_default() uses the following algorithm to select an I/O
scheduler from inside add_disk():
- In case of a single hardware queue or if sharing hardware queues across
multiple request queues (BLK_MQ_F_TAG_HCTX_SHARED), use mq-deadline.
- Otherwise, use 'none'.
This is a good choice for most but not for all block drivers. Make it
possible to override the selection of mq-deadline with a new flag,
namely BLK_MQ_F_NO_SCHED_BY_DEFAULT.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Martijn Coenen <maco@android.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805174200.3250718-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch modified set_cs_timing parameter, no need pass in spi_delay
to set_cs_timing callback.
By the way, we modified the mediatek and tegra114 spi driver to fix build err.
In mediatek spi driver, We have support set absolute time not clk_count,
and call this function in prepare_message not user's API.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133746.6742-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As we know, spi core layer has removed spi_set_cs_timing() API.
So this patch moved spi_delay for cs_timing from spi_controller
to spi_device, because cs timing should be set by spi_device but
not controller.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133716.32040-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are two users of iomem_get_mapping(), the struct file and struct
bin_attribute. The former has a member called "f_mapping" and the
latter has a member called "mapping", and both are poniters to struct
address_space.
Rename struct bin_attribute member to "f_mapping" to keep both meaning
and the usage consistent with other users of iomem_get_mapping().
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20210729233235.1508920-3-kw@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Defer invocation of the iomem_get_mapping() to the sysfs open callback
so that it can be executed as needed when the binary sysfs object has
been accessed.
To do that, convert the "mapping" member of the struct bin_attribute
from a pointer to the struct address_space into a function pointer with
a signature that requires the same return type, and then updates the
sysfs_kf_bin_open() to invoke provided function should the function
pointer be valid.
Also, convert every invocation of iomem_get_mapping() into a function
pointer assignment, therefore allowing for the iomem_get_mapping()
invocation to be deferred to when the sysfs open callback runs.
Thus, this change removes the need for the fs_initcalls to complete
before any other sub-system that uses the iomem_get_mapping() would be
able to invoke it safely without leading to a failure and an Oops
related to an invalid iomem_get_mapping() access.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20210729233235.1508920-2-kw@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The only actual use is to check in zorro_device_probe() that the device
isn't already bound. The driver core already ensures this however so the
check can go away which allows to drop the then assigned-only member
from struct zorro_dev.
If the value was indeed needed somewhere it can always be calculated by
to_zorro_driver(z->dev.driver)
.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210730191035.1455248-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the case if dev is NULL in dev_{put, hold}, so the caller doesn't
need to care whether dev is NULL or not.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make controller driver specify the MMIO register region length
for range checking of BHI or BHIe space. This can help validate
that offsets are in acceptable memory region or not and avoid any
boot-up issues due to BHI or BHIe memory accesses.
Link: https://lore.kernel.org/r/1620330705-40192-4-git-send-email-bbhatt@codeaurora.org
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the MHI controller driver defines which channels should
have their inbound buffers allocated and queued. But ideally, this is
something that should be decided by the MHI device driver instead,
which actually deals with that buffers.
Add a flag parameter to mhi_prepare_for_transfer allowing to specify
if buffers have to be allocated and queued by the MHI stack.
Keep auto_queue flag for now, but should be removed at some point.
Link: https://lore.kernel.org/r/1624566520-20406-1-git-send-email-loic.poulain@linaro.org
Tested-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager changes for 5.15-rc1
FPGA Manager
- Colin's change is a simple spelling cleanup.
DFL
- Martin's fist change exposes DFL feature revision to client drivers
- Martin's second change modifies a SPI driver to populate different
spi_board_info modaliases based on the DFL feature revision
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
spi: spi-altera-dfl: support n5010 feature revision
fpga: dfl: expose feature revision from struct dfl_device
fpga: Fix spelling mistake "eXchnage" -> "exchange" in Kconfig
|
|
Replace IP_SFLSIZE() with struct_size() helper in order to avoid any
potential type mistakes or integer overflows that, in the worst
scenario, could lead to heap overflows.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract lockdep_assert{,_once}() helpers to more easily write composite
assertions like, for example:
lockdep_assert(lockdep_is_held(&drm_device.master_mutex) ||
lockdep_is_held(&drm_file.master_lookup_lock));
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802105957.77692-2-desmondcheongzx@gmail.com
|
|
GPI DMA is one of the DMA modes supported on geni, this adds support to
enable that mode
Also do better documentation of the enum geni_se_xfer_mode.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210625052213.32260-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
GENI_IF_DISABLE_RO is used by geni spi driver as well to check the
status if GENI, so move this to common header qcom-geni-se.h
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210625052213.32260-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/drivers
IXP4xx driver updates for modernizing the IXP4xx platforms,
taregeted for v5.15:
- Add DT bindings to the expansion bus and PATA libata driver.
- Add a new expansion bus driver.
- Rewrite the watchdog driver to use the watchdog core and
spawn from the timer (clocksource) driver.
- Refactor the PATA/libata driver to probe from the device
tree and use the expansion bus driver to manipulate chip
select timings directly.
* tag 'ixp4xx-drivers-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
pata: ixp4xx: Rewrite to use device tree
pata: ixp4xx: Add DT bindings
pata: ixp4xx: Refer to cmd and ctl rather than csN
pata: ixp4xx: Use IS_ENABLED() to determine endianness
pata: ixp4xx: Use local dev variable
watchdog: ixp4xx: Rewrite driver to use core
bus: ixp4xx: Add a driver for IXP4xx expansion bus
bus: ixp4xx: Add DT bindings for the IXP4xx expansion bus
Link: https://lore.kernel.org/r/CACRpkdZaCosXsgp02nuUbd_nEvdxm5-z0+d0oSA97UTWQ0RQQg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc
AT91 soc for 5.15:
- add new SoC based on a Cortex-A7 core: the SAMA7G5 family
- mach-at91 entry, Kconfig and header files
- Power Management Controller (PMC) code and associated power management
changes. Support for suspend/resume, Ultra Low Power modes and
Backup with Memory in Self-Refresh mode.
- Power management association with DDR controller and
shutdown controller for addressing this variety of modes.
* tag 'at91-soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (26 commits)
ARM: at91: pm: add sama7g5 shdwc
ARM: at91: pm: add pm support for SAMA7G5
ARM: at91: sama7: introduce sama7 SoC family
ARM: at91: pm: add sama7g5's pmc
ARM: at91: pm: add backup mode support for SAMA7G5
ARM: at91: pm: save ddr phy calibration data to securam
ARM: at91: pm: add sama7g5 ddr phy controller
ARM: at91: pm: add sama7g5 ddr controller
ARM: at91: pm: wait for ddr power mode off
ARM: at91: pm: add support for 2.5V LDO regulator control
ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes
ARM: at91: pm: add self-refresh support for sama7g5
ARM: at91: ddr: add registers definitions for sama7g5's ddr
ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5
ARM: at91: pm: add support for waiting MCK1..4
ARM: at91: pm: s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g
ARM: at91: pm: avoid push and pop on stack while memory is in self-refersh
ARM: at91: pm: use r7 instead of tmp1
ARM: at91: pm: do not initialize pdev
ARM: at91: pm: check for different controllers in at91_pm_modes_init()
...
Link: https://lore.kernel.org/r/20210804084316.12641-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With the introduction of explicit offloading API in switchdev in commit
2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge
ports are offloaded"), we started having Ethernet switch drivers calling
directly into a function exported by net/bridge/br_switchdev.c, which is
a function exported by the bridge driver.
This means that drivers that did not have an explicit dependency on the
bridge before, like cpsw and am65-cpsw, now do - otherwise it is not
possible to call a symbol exported by a driver that can be built as
module unless you are a module too.
There was an attempt to solve the dependency issue in the form of commit
b0e81817629a ("net: build all switchdev drivers as modules when the
bridge is a module"). Grygorii Strashko, however, says about it:
| In my opinion, the problem is a bit bigger here than just fixing the
| build :(
|
| In case, of ^cpsw the switchdev mode is kinda optional and in many
| cases (especially for testing purposes, NFS) the multi-mac mode is
| still preferable mode.
|
| There were no such tight dependency between switchdev drivers and
| bridge core before and switchdev serviced as independent, notification
| based layer between them, so ^cpsw still can be "Y" and bridge can be
| "M". Now for mostly every kernel build configuration the CONFIG_BRIDGE
| will need to be set as "Y", or we will have to update drivers to
| support build with BRIDGE=n and maintain separate builds for
| networking vs non-networking testing. But is this enough? Wouldn't
| it cause 'chain reaction' required to add more and more "Y" options
| (like CONFIG_VLAN_8021Q)?
|
| PS. Just to be sure we on the same page - ARM builds will be forced
| (with this patch) to have CONFIG_TI_CPSW_SWITCHDEV=m and so all our
| automation testing will just fail with omap2plus_defconfig.
In the light of this, it would be desirable for some configurations to
avoid dependencies between switchdev drivers and the bridge, and have
the switchdev mode as completely optional within the driver.
Arnd Bergmann also tried to write a patch which better expressed the
build time dependency for Ethernet switch drivers where the switchdev
support is optional, like cpsw/am65-cpsw, and this made the drivers
follow the bridge (compile as module if the bridge is a module) only if
the optional switchdev support in the driver was enabled in the first
place:
https://patchwork.kernel.org/project/netdevbpf/patch/20210802144813.1152762-1-arnd@kernel.org/
but this still did not solve the fact that cpsw and am65-cpsw now must
be built as modules when the bridge is a module - it just expressed
correctly that optional dependency. But the new behavior is an apparent
regression from Grygorii's perspective.
So to support the use case where the Ethernet driver is built-in,
NET_SWITCHDEV (a bool option) is enabled, and the bridge is a module, we
need a framework that can handle the possible absence of the bridge from
the running system, i.e. runtime bloatware as opposed to build-time
bloatware.
Luckily we already have this framework, since switchdev has been using
it extensively. Events from the bridge side are transmitted to the
driver side using notifier chains - this was originally done so that
unrelated drivers could snoop for events emitted by the bridge towards
ports that are implemented by other drivers (think of a switch driver
with LAG offload that listens for switchdev events on a bonding/team
interface that it offloads).
There are also events which are transmitted from the driver side to the
bridge side, which again are modeled using notifiers.
SWITCHDEV_FDB_ADD_TO_BRIDGE is an example of this, and deals with
notifying the bridge that a MAC address has been dynamically learned.
So there is a precedent we can use for modeling the new framework.
The difference compared to SWITCHDEV_FDB_ADD_TO_BRIDGE is that the work
that the bridge needs to do when a port becomes offloaded is blocking in
its nature: replay VLANs, MDBs etc. The calling context is indeed
blocking (we are under rtnl_mutex), but the existing switchdev
notification chain that the bridge is subscribed to is only the atomic
one. So we need to subscribe the bridge to the blocking switchdev
notification chain too.
This patch:
- keeps the driver-side perception of the switchdev_bridge_port_{,un}offload
unchanged
- moves the implementation of switchdev_bridge_port_{,un}offload from
the bridge module into the switchdev module.
- makes everybody that is subscribed to the switchdev blocking notifier
chain "hear" offload & unoffload events
- makes the bridge driver subscribe and handle those events
- moves the bridge driver's handling of those events into 2 new
functions called br_switchdev_port_{,un}offload. These functions
contain in fact the core of the logic that was previously in
switchdev_bridge_port_{,un}offload, just that now we go through an
extra indirection layer to reach them.
Unlike all the other switchdev notification structures, the structure
used to carry the bridge port information, struct
switchdev_notifier_brport_info, does not contain a "bool handled".
This is because in the current usage pattern, we always know that a
switchdev bridge port offloading event will be handled by the bridge,
because the switchdev_bridge_port_offload() call was initiated by a
NETDEV_CHANGEUPPER event in the first place, where info->upper_dev is a
bridge. So if the bridge wasn't loaded, then the CHANGEUPPER event
couldn't have happened.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The two "cs0" and "cs1" are "chip selects" but on some
platforms such as GW2358 they are actually both in CS3
making this terminology very confusing. Call the
addresses "cmd" and "ctl" after function instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues()
can fail which breaks drivers trying to implement reconfiguration
in a way that can't leave the device half-broken. In other words
those functions are incompatible with prepare/commit approach.
Luckily setting real number of queues can fail only if the number
is increased, meaning that if we order operations correctly we
can guarantee ending up with either new config (success), or
the old one (on error).
Provide a helper implementing such logic so that drivers don't
have to duplicate it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of a switch DPAA2 object, the interface ID is also needed when
querying for the object endpoint. Extend fsl_mc_get_endpoint() so that
users can also pass the interface ID that are interested in.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Root Ports in NXP LX2xx0 and LX2xx2, where each Root Port is a Root Complex
with unique segment numbers, do provide isolation features to disable peer
transactions and validate bus numbers in requests, but do not provide an
actual PCIe ACS capability.
Add ACS quirks for NXP LX2xx0 A/C/E/N and LX2xx2 A/C/E/N platforms.
LX2xx0A : without security features + CAN-FD
LX2160A (0x8d81) - 16 cores
LX2120A (0x8da1) - 12 cores
LX2080A (0x8d83) - 8 cores
LX2xx0C : security features + CAN-FD
LX2160C (0x8d80) - 16 cores
LX2120C (0x8da0) - 12 cores
LX2080C (0x8d82) - 8 cores
LX2xx0E : security features + CAN
LX2160E (0x8d90) - 16 cores
LX2120E (0x8db0) - 12 cores
LX2080E (0x8d92) - 8 cores
LX2xx0N : without security features + CAN
LX2160N (0x8d91) - 16 cores
LX2120N (0x8db1) - 12 cores
LX2080N (0x8d93) - 8 cores
LX2xx2A : without security features + CAN-FD
LX2162A (0x8d89) - 16 cores
LX2122A (0x8da9) - 12 cores
LX2082A (0x8d8b) - 8 cores
LX2xx2C : security features + CAN-FD
LX2162C (0x8d88) - 16 cores
LX2122C (0x8da8) - 12 cores
LX2082C (0x8d8a) - 8 cores
LX2xx2E : security features + CAN
LX2162E (0x8d98) - 16 cores
LX2122E (0x8db8) - 12 cores
LX2082E (0x8d9a) - 8 cores
LX2xx2N : without security features + CAN
LX2162N (0x8d99) - 16 cores
LX2122N (0x8db9) - 12 cores
LX2082N (0x8d9b) - 8 cores
[bhelgaas: put PCI_VENDOR_ID_NXP definition next to PCI_VENDOR_ID_FREESCALE
as a clue that they share the same Device ID namespace]
Link: https://lore.kernel.org/r/20210729121747.1823086-1-wasim.khan@oss.nxp.com
Link: https://lore.kernel.org/r/20210803180021.3252886-1-wasim.khan@oss.nxp.com
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The existing inline data support only works for cases where the entire
file is stored as inline data. For larger files, EROFS stores the
initial blocks separately and the remainder of the file ("file tail")
adjacent to the inode. Generalise inline data to allow reading the
inline file tail. Tails may not cross a page boundary in memory.
We currently have no filesystems that support tails and writing,
so that case is currently disabled (see iomap_write_begin_inline).
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Implementing live patching on s390 requires each function's prologue to
contain a very special kind of nop, which gcc and clang don't generate.
However, the current code assumes that if CC_USING_NOP_MCOUNT is
defined, then whatever the compiler generates is good enough.
Move the CC_USING_NOP_MCOUNT check into the new ftrace_need_init_nop()
macro, that the architectures can override.
An alternative solution is to disable using -mnop-mcount in the
Makefile, however, this makes the build logic (even) more complicated
and forces the arch-specific code to deal with the useless __fentry__
symbol.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20210728212546.128248-2-iii@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This is now only used by a handful of old ISA drivers,
and can be moved into the file they already all depend on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like skb_realloc_headroom(), new helper increases headroom of specified skb.
Unlike skb_realloc_headroom(), it does not allocate a new skb if possible;
copies skb->sk on new skb when as needed and frees original skb in case
of failures.
This helps to simplify ip[6]_finish_output2() and a few other similar cases.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We would like to avoid taking mmu_lock for .invalidate_range_{start,end}()
notifications that are unrelated to KVM. Because mmu_notifier_count
must be modified while holding mmu_lock for write, and must always
be paired across start->end to stay balanced, lock elision must
happen in both or none. Therefore, in preparation for this change,
this patch prevents memslot updates across range_start() and range_end().
Note, technically flag-only memslot updates could be allowed in parallel,
but stalling a memslot update for a relatively short amount of time is
not a scalability issue, and this is all more than complex enough.
A long note on the locking: a previous version of the patch used an rwsem
to block the memslot update while the MMU notifier run, but this resulted
in the following deadlock involving the pseudo-lock tagged as
"mmu_notifier_invalidate_range_start".
======================================================
WARNING: possible circular locking dependency detected
5.12.0-rc3+ #6 Tainted: G OE
------------------------------------------------------
qemu-system-x86/3069 is trying to acquire lock:
ffffffff9c775ca0 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: __mmu_notifier_invalidate_range_end+0x5/0x190
but task is already holding lock:
ffffaff7410a9160 (&kvm->mmu_notifier_slots_lock){.+.+}-{3:3}, at: kvm_mmu_notifier_invalidate_range_start+0x36d/0x4f0 [kvm]
which lock already depends on the new lock.
This corresponds to the following MMU notifier logic:
invalidate_range_start
take pseudo lock
down_read() (*)
release pseudo lock
invalidate_range_end
take pseudo lock (**)
up_read()
release pseudo lock
At point (*) we take the mmu_notifiers_slots_lock inside the pseudo lock;
at point (**) we take the pseudo lock inside the mmu_notifiers_slots_lock.
This could cause a deadlock (ignoring for a second that the pseudo lock
is not a lock):
- invalidate_range_start waits on down_read(), because the rwsem is
held by install_new_memslots
- install_new_memslots waits on down_write(), because the rwsem is
held till (another) invalidate_range_end finishes
- invalidate_range_end sits waits on the pseudo lock, held by
invalidate_range_start.
Removing the fairness of the rwsem breaks the cycle (in lockdep terms,
it would change the *shared* rwsem readers into *shared recursive*
readers), so open-code the wait using a readers count and a
spinlock. This also allows handling blockable and non-blockable
critical section in the same way.
Losing the rwsem fairness does theoretically allow MMU notifiers to
block install_new_memslots forever. Note that mm/mmu_notifier.c's own
retry scheme in mmu_interval_read_begin also uses wait/wake_up
and is likewise not fair.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that TTC logic is not dependent on mlx5e structs, move it to
lib/fs_ttc.c so it could be used other part of the mlx5 driver.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Refactor disk_check_events() and move some code into disk_event_uevent().
Then add disk_force_media_change(), a helper which will be used by
devices to force issuing a DISK_EVENT_MEDIA_CHANGE event.
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-6-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Associating uevents with block devices in userspace is difficult and racy:
the uevent netlink socket is lossy, and on slow and overloaded systems
has a very high latency.
Block devices do not have exclusive owners in userspace, any process can
set one up (e.g. loop devices). Moreover, device names can be reused
(e.g. loop0 can be reused again and again). A userspace process setting
up a block device and watching for its events cannot thus reliably tell
whether an event relates to the device it just set up or another earlier
instance with the same name.
Being able to set a UUID on a loop device would solve the race conditions.
But it does not allow to derive orderings from uevents: if you see a
uevent with a UUID that does not match the device you are waiting for,
you cannot tell whether it's because the right uevent has not arrived yet,
or it was already sent and you missed it. So you cannot tell whether you
should wait for it or not.
Associating a unique, monotonically increasing sequential number to the
lifetime of each block device, which can be retrieved with an ioctl
immediately upon setting it up, allows to solve the race conditions with
uevents, and also allows userspace processes to know whether they should
wait for the uevent they need or if it was dropped and thus they should
move on.
Additionally, increment the disk sequence number when the media change,
i.e. on DISK_EVENT_MEDIA_CHANGE event.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20210712230530.29323-2-mcroce@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
cmdline-parser.c is only used by the cmdline faux partition format,
so merge the code into that and avoid an indirect call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210728053756.409654-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we've stopped using inode references for anything meaninful
in the block layer get rid of the helper to put it and just open code
the call to iput on the block_device inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers are gone, and no one should grab a pure inode reference to
a block device anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210722075402.983367-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
