| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Reset hrtimers correctly when a CPU hotplug state traversal happens
"half-ways" and leaves hrtimers not (re-)initialized properly
- Annotate accesses to a timer group's ignore flag to prevent KCSAN
from raising data_race warnings
- Make sure timer group initialization is visible to timer tree walkers
and avoid a hypothetical race
- Fix another race between CPU hotplug and idle entry/exit where timers
on a fully idle system are getting ignored
- Fix a case where an ignored signal is still being handled which it
shouldn't be
* tag 'timers_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Handle CPU state correctly on hotplug
timers/migration: Annotate accesses to ignore flag
timers/migration: Enforce group initialization visibility to tree walkers
timers/migration: Fix another race between hotplug and idle entry/exit
signal/posixtimers: Handle ignore/blocked sequences correctly
|
|
key_being_used_for[] is an unused array of textual names for
the elements of the enum key_being_used_for. It was added in 2015 by
commit 99db44350672 ("PKCS#7: Appropriately restrict authenticated
attributes and content type")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have some leftovers from the switch to linkmode bitmaps which
- have never been used
- are not used any longer
- have no user outside phy_device.c
So remove them.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/5493b96e-88bb-4230-a911-322659ec5167@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Samsung Exynos mailbox controller, used on Google GS101 SoC, has 16
flag bits for hardware interrupt generation and a shared register for
passing mailbox messages. When the controller is used by the
ACPM interface the shared register is ignored and the mailbox controller
acts as a doorbell. The controller just raises the interrupt to APM
after the ACPM interface has written the message to SRAM.
Add support for the Samsung Exynos mailbox controller.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add a mailbox controller driver for the Microchip Inter-processor
Communication (IPC), which is used to send and receive data between
processors.
The driver uses the RISC-V Supervisor Binary Interface (SBI) to
communicate with software running in machine mode (M-mode) to access
the IPC hardware block.
Additional details on the Microchip vendor extension and the IPC
function IDs described in the driver can be found in the following
documentation:
https://github.com/linux4microchip/microchip-sbi-ecall-extension
This SBI interface in this driver is compatible with the Mi-V Inter-hart
Communication (IHC) IP.
Transmitting and receiving data through the mailbox framework is done
through struct mchp_ipc_msg.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add a new field called 'parent_bus_addr' to struct of_pci_range to use
when retrieving parent bus address information.
Refer to the diagram below to better understand that the bus fabric in
some systems (like i.MX8QXP) does not always use a 1:1 address map
between input and output.
Currently, many controller drivers use the cpu_addr_fixup() callback
that would often hardcode address translation directly in the code, e.g.,
"cpu_addr & CDNS_PLAT_CPU_TO_BUS_ADDR" or "cpu_addr + BUS_IATU_OFFSET",
etc., even though those translations *should* be described via DT.
However, the cpu_addr_fixup() can be eliminated if DT correctly reflects
hardware behavior and drivers use 'parent_bus_addr' in struct of_pci_range.
┌─────────┐ ┌────────────┐
┌─────┐ │ │ IA: 0x8ff8_0000 │ │
│ CPU ├───►│ ┌────►├─────────────────┐ │ PCI │
└─────┘ │ │ │ IA: 0x8ff0_0000 │ │ │
CPU Addr │ │ ┌─►├─────────────┐ │ │ Controller │
0x7ff8_0000─┼───┘ │ │ │ │ │ │
│ │ │ │ │ │ │ PCI Addr
0x7ff0_0000─┼──────┘ │ │ └──► IOSpace ─┼────────────►
│ │ │ │ │ 0
0x7000_0000─┼────────►├─────────┐ │ │ │
└─────────┘ │ └──────► CfgSpace ─┼────────────►
BUS Fabric │ │ │ 0
│ │ │
└──────────► MemSpace ─┼────────────►
IA: 0x8000_0000 │ │ 0x8000_0000
└────────────┘
bus@5f000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x80000000 0x0 0x70000000 0x10000000>;
pcie@5f010000 {
compatible = "fsl,imx8q-pcie";
reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
<0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
...
};
};
In the diagram above, the 'parent_bus_addr' field in struct of_pci_range
can indicate internal address (IA) address information.
Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-1-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. This hybrid nature is undesirable.
Since all users of pci_intx() have by now been ported either to
always-managed pcim_intx() or never-managed pci_intx_unmanaged(), the
devres functionality can be removed from pci_intx().
Consequently, pci_intx_unmanaged() is now redundant, because pci_intx()
itself is now unmanaged.
Remove the devres functionality from pci_intx(). Have all users of
pci_intx_unmanaged() call pci_intx(). Remove pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-13-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
|
|
pci_intx() is a hybrid function which sometimes performs devres operations,
depending on whether pcim_enable_device() has been used to enable the
pci_dev. This sometimes-managed nature of the function is problematic.
Notably, it causes the function to allocate under some circumstances which
makes it unusable from interrupt context.
Export pcim_intx() (which is always managed) and rename __pcim_intx()
(which is never managed) to pci_intx_unmanaged() and export it as well.
Then all callers of pci_intx() can be ported to the version they need,
depending whether they use pci_enable_device() or pcim_enable_device().
Link: https://lore.kernel.org/r/20241209130632.132074-3-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
xtheadvector is a custom extension that is based upon riscv vector
version 0.7.1 [1]. All of the vector routines have been modified to
support this alternative vector version based upon whether xtheadvector
was determined to be supported at boot.
vlenb is not supported on the existing xtheadvector hardware, so a
devicetree property thead,vlenb is added to provide the vlenb to Linux.
There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is
used to request which thead vendor extensions are supported on the
current platform. This allows future vendors to allocate hwprobe keys
for their vendor.
Support for xtheadvector is also added to the vector kselftests.
[1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361c61d335e03d3134b14133f/xtheadvector.adoc
* b4-shazam-merge:
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-0-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Follow the patterns of the other architectures that use
GENERIC_CPU_VULNERABILITIES for riscv to introduce the ghostwrite
vulnerability and mitigation. The mitigation is to disable all vector
which is accomplished by clearing the bit from the cpufeature field.
Ghostwrite only affects thead c9xx CPUs that impelment xtheadvector, so
the vulerability will only be mitigated on these CPUs.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-14-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
For packets with two-step timestamp requests, the hardware timestamp
comes back to the driver through a confirmation mechanism of sorts,
which allows the driver to confidently bump the successful "pkts"
counter.
For one-step PTP, the NIC is supposed to autonomously insert its
hardware TX timestamp in the packet headers while simultaneously
transmitting it. There may be a confirmation that this was done
successfully, or there may not.
None of the current drivers which implement ethtool_ops :: get_ts_stats()
also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it
is a bit unclear which model to follow. But there are NICs, such as DSA,
where there is no transmit confirmation at all. Here, it would be wrong /
misleading to increment the successful "pkts" counter, because one-step
PTP packets can be dropped on TX just like any other packets.
So introduce a special counter which signifies "yes, an attempt was made,
but we don't know whether it also exited the port or not". I expect that
for one-step PTP packets where a confirmation is available, the "pkts"
counter would be bumped.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: support FW Recovery Mode
Konrad Knitter says:
Enable update of card in FW Recovery Mode
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: support FW Recovery Mode
devlink: add devl guard
pldmfw: enable selected component update
====================
Link: https://patch.msgid.link/20250116212059.1254349-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two last minute fixes: one build issue on TI soc drivers, and a
regression in the renesas reset controller driver"
* tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: ti: pruss: Fix pruss APIs
reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device
|
|
... so that they can be copied with struct assignment (which generates
better code) and accessed word-by-word.
The type is union shortname_storage; it's a union of arrays of
unsigned char and unsigned long.
struct name_snapshot.inline_name turned into union shortname_storage;
users (all in fs/dcache.c) adjusted.
struct dentry.d_iname has some users outside of fs/dcache.c; to
reduce the amount of noise in commit, it is replaced with
union shortname_storage d_shortname and d_iname is turned into a macro
that expands to d_shortname.string (similar to d_lock handling).
That compat macro is temporary - most of the remaining instances will
be taken out by debugfs series, and once that is merged and few others
are taken care of this will go away.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... calling the number of words DNAME_INLINE_WORDS.
The next step will be to have a structure to hold inline name arrays
(both in dentry and in name_snapshot) and use that to alias the
existing arrays of unsigned char there. That will allow both
full-structure copies and convenient word-by-word accesses.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Support stacking atomic write limits for DM devices.
All the pre-existing code in blk_stack_atomic_writes_limits() already takes
care of finding the aggregrate limits from the bottom devices.
Feature flag DM_TARGET_ATOMIC_WRITES is introduced so that atomic writes
can be enabled on personalities selectively. This is to ensure that atomic
writes are only enabled when verified to be working properly (for a
specific personality). In addition, it just may not make sense to enable
atomic writes on some personalities (so this flag also helps there).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Currently only stacked devices need to explicitly enable atomic writes by
setting BLK_FEAT_ATOMIC_WRITES_STACKED flag.
This does not work well for device mapper stacking devices, as there many
sets of limits are stacked and what is the 'bottom' and 'top' device can
swapped. This means that BLK_FEAT_ATOMIC_WRITES_STACKED needs to be set
for many queue limits, which is messy.
Generalize enabling atomic writes enabling by ensuring that all devices
must explicitly set a flag - that includes NVMe, SCSI sd, and md raid.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250116170301.474130-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add device-managed variant of dev_pm_set_wake_irq which automatically
clear the wake irq on device destruction to simplify error handling
and resource management in drivers.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250103-wake_irq-v2-1-e3aeff5e9966@nxp.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce power budget management for the regulator device. Enable tracking
of available power capacity by providing helpers to request and release
power budget allocations.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250115-feature_regulator_pw_budget-v2-1-0a44b949e6bc@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add kerneldoc and sysfs class documentation.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-19-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
platform_profile_handler is now an internal structure. Move it to
platform_profile.c.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-17-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In order to protect the platform_profile_handler from API consumers,
allocate it in platform_profile_register() and modify it's signature
accordingly.
Remove the platform_profile_handler from all consumer drivers and
replace them with a pointer to the class device, which is
now returned from platform_profile_register().
Replace *pprof with a pointer to the class device in the rest of
exported symbols.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-16-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
of_alias_scan() has no external callers and returns void.
Do not expose it and delete return value descriptions in its comments.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250114-of_core_fix-v5-1-b8bafd00a86f@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
kgdb_nmi_poll_knock() has been unused since it was added in 2013 in
commit 0c57dfcc6c1d ("tty/serial: Add kgdb_nmi driver")
Remove it, the static helpers, and module parameters it used.
(The comment explaining why it might be used sounds sensible, but
it's never been wired up, perhaps it's worth doing somewhere?)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250112135759.105541-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Source can drop its output voltage to the minimum of the requested
PPS APDO voltage range when it is in Current Limit Mode. If this voltage
falls within the range of vPpsShutdown, the Source initiates a Hard
Reset and discharges Vbus. However, currently the Sink may disconnect
before the voltage reaches vPpsShutdown, leading to unexpected behavior.
Prevent premature disconnection by setting the Sink's disconnect
threshold to the minimum vPpsShutdown value. Additionally, consider the
voltage drop due to IR drop when calculating the appropriate threshold.
This ensures a robust and reliable interaction between the Source and
Sink during SPR PPS Current Limit Mode operation.
Fixes: 4288debeaa4e ("usb: typec: tcpci: Fix up sink disconnect thresholds for PD")
Cc: stable <stable@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250114142435.2093857-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'rockchip', 'riscv', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
Add EEE management to phylink, making use of the phylib implementation.
This will only be used where a MAC driver populates the methods and
capabilities bitfield, otherwise we keep our old behaviour.
Phylink will keep track of the EEE configuration, including the clock
stop abilities at each end of the MAC to PHY link, programming the PHY
appropriately and preserving the LPI configuration should the PHY go
away.
Phylink will call into the MAC driver when LPI needs to be enabled or
disabled, with the requirement that the MAC have LPI disabled prior
to the netdev being brought up (in other words, it will only call
mac_disable_tx_lpi() if it has already called mac_enable_tx_lpi().)
Support for phylink managed EEE is enabled by populating both tx_lpi
MAC operations method pointers, and filling in both LPI interfaces
and capabilities. If the methods are provided but the LPI interfaces
or capabilities remain empty, this indicates to phylink that EEE is
implemented by the driver but the hardware it is driving does not
support EEE, and thus the ethtool set_eee() and get_eee() methods will
return EOPNOTSUPP.
No validation of the LPI timer value is performed by this patch.
For interface modes which do not support LPI, we make no attempt to
manipulate the phylib EEE advertisement, but instead refuse to
activate LPI at the MAC, noting it at debug message level.
We also restrict the advertisement and reported userspace support
linkmode masks according to the lpi_capabilities provided to
phylink by the MAC driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADq-0014Pn-J1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for querying whether the PHY allows the transmit xMII clock
to be stopped while in LPI mode. This will be used by phylink to pass
to the MAC driver so it can configure the generation of the xMII clock
appropriately.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADg-0014Pb-AJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch enables to update a selected component from PLDM image
containing multiple components.
Example usage:
struct pldmfw;
data.mode = PLDMFW_UPDATE_MODE_SINGLE_COMPONENT;
data.compontent_identifier = DRIVER_FW_MGMT_COMPONENT_ID;
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc8).
Conflicts:
drivers/net/ethernet/realtek/r8169_main.c
1f691a1fc4be ("r8169: remove redundant hwmon support")
152d00a91396 ("r8169: simplify setting hwmon attribute visibility")
https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command")
f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref")
drivers/net/ethernet/intel/ice/ice_type.h
50327223a8bb ("ice: add lock to protect low latency interface")
dc26548d729e ("ice: Fix quad registers read on E825")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pcie_read_tlp_log() handles only 4 Header Log DWORDs but TLP Prefix Log
(PCIe r6.1 secs 7.8.4.12 & 7.9.14.13) may also be present.
Generalize pcie_read_tlp_log() and struct pcie_tlp_log to also handle TLP
Prefix Log. The relevant registers are formatted identically in AER and DPC
Capability, but has these variations:
a) The offsets of TLP Prefix Log registers vary.
b) DPC RP PIO TLP Prefix Log register can be < 4 DWORDs.
c) AER TLP Prefix Log Present (PCIe r6.1 sec 7.8.4.7) can indicate Prefix
Log is not present.
Therefore callers must pass the offset of the TLP Prefix Log register and
the entire length to pcie_read_tlp_log() to be able to read the correct
number of TLP Prefix DWORDs from the correct offset.
Link: https://lore.kernel.org/r/20250114170840.1633-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash ternary fix from
https://lore.kernel.org/r/20250116172019.88116-1-colin.i.king@gmail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a `probe` callback to platform_profile_ops, which lets drivers
initialize the choices member manually. This is a step towards
unexposing the struct platform_profile_handler from the consumer
drivers.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-6-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Replace *profile_get and *profile_set members with a general *ops
member.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-5-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices can now set drvdata to the class device, thus passing the
platform_profile_handler to callbacks is unnecessary. Instead pass the
class device.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add *drvdata to platform_profile_register() signature and assign it to
the class device.
While at it, pass specific driver state as drvdata to replace uses of
container_of() with dev_get_drvdata().
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Instead of holding a reference to the class device, embed it the
platform_profile_handler. This involves manually creating and
registering the device and replacing dev_get_drvdata() with the newly
created to_pprof_handler() macro.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-2-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com
|
|
Add a helper to initialize the lockdep, that is initialize the spinlock
and set a value. Having to open code them isn't a big deal, but having
an initializer feels right for a proper primitive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-6-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Drop the superfluous externs from the remaining prototypes in lockref.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-5-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace int used as bool with the actual bool type for return values that
can only be true or false.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-4-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
lockref_put_not_zero is not used anywhere, and unless I'm missing
something didn't end up being used used at all. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-2-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix the return type of do_mount() function from long to int to match its ac
tual behavior. The function only returns int values, and all callers, inclu
ding those in fs/namespace.c and arch/alpha/kernel/osf_sys.c, already treat
the return value as int. This change improves type consistency across the
filesystem code and aligns the function signature with its existing impleme
ntation and usage.
Signed-off-by: Sentaro Onizuka <sentaro@amazon.com>
Link: https://lore.kernel.org/r/20250113151400.55512-1-sentaro@amazon.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The new ASUS ProArt 16" laptop series come with their keyboards stuck in
an Out-Of-Box-Experience mode. While in this mode most functions will
not work such as LED control or Fn key combos. The correct init sequence
is now done to disable this OOBE.
This patch addresses only the ProArt series so far and it is unknown if
there may be others, in which case a new quirk may be required.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Tested-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Protect the following members of netdev and napi by netdev_lock:
- defer_hard_irqs,
- gro_flush_timeout,
- irq_suspend_timeout.
The first two are written via sysfs (which this patch switches
to new lock), and netdev genl which holds both netdev and rtnl locks.
irq_suspend_timeout is only written by netdev genl.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Take netdev_lock() in netif_napi_set_irq(). All NAPI "control fields"
are now protected by that lock (most of the other ones are set during
napi add/del). The napi_hash_node is fully protected by the hash
spin lock, but close enough for the kdoc...
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that NAPI instances can't come and go without holding
netdev->lock we can trivially switch from rtnl_lock() to
netdev_lock() for setting netdev->threaded via sysfs.
Note that since we do not lock netdev_lock around sysfs
calls in the core we don't have to "trylock" like we do
with rtnl_lock.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap napi_enable() / napi_disable() with netdev_lock().
Provide the "already locked" flavor of the API.
iavf needs the usual adjustment. A number of drivers call
napi_enable() under a spin lock, so they have to be modified
to take netdev_lock() first, then spin lock then call
napi_enable_locked().
Protecting napi_enable() implies that napi->napi_id is protected
by netdev_lock().
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # via-velocity
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hold netdev->lock when NAPIs are getting added or removed.
This will allow safe access to NAPI instances of a net_device
without rtnl_lock.
Create a family of helpers which assume the lock is already taken.
Switch iavf to them, as it makes extensive use of netdev->lock,
already.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some uAPI (netdev netlink) hide net_device's sub-objects while
the interface is down to ensure uniform behavior across drivers.
To remove the rtnl_lock dependency from those uAPIs we need a way
to safely tell if the device is down or up.
Add an indication of whether device is open or closed, protected
by netdev->lock. The semantics are the same as IFF_UP, but taking
netdev_lock around every write to ->flags would be a lot of code
churn.
We don't want to blanket the entire open / close path by netdev_lock,
because it will prevent us from applying it to specific structures -
core helpers won't be able to take that lock from any function
called by the drivers on open/close paths.
So the state of the flag is "pessimistic", as in it may report false
negatives, but never false positives.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
