| Age | Commit message (Collapse) | Author |
|---|
|
Protect writes to netdev->reg_state with netdev_lock().
From now on holding netdev_lock() is sufficient to prevent
the net_device from getting unregistered, so code which
wants to hold just a single netdev around no longer needs
to hold rtnl_lock.
We do not protect the NETREG_UNREGISTERED -> NETREG_RELEASED
transition. We'd need to move mutex_destroy(netdev->lock)
to .release, but the real reason is that trying to stop
the unregistration process mid-way would be unsafe / crazy.
Taking references on such devices is not safe, either.
So the intended semantics are to lock REGISTERED devices.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers for locking the netdev instance, use it in drivers
and the shaper code. This will make grepping for the lock usage
much easier, as we extend the lock to cover more fields.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250115035319.559603-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following fields of 'struct mr_mfc' can be updated
concurrently (no lock protection) from ip_mr_forward()
and ip6_mr_forward()
- bytes
- pkt
- wrong_if
- lastuse
They also can be read from other functions.
Convert bytes, pkt and wrong_if to atomic_long_t,
and use READ_ONCE()/WRITE_ONCE() for lastuse.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250114221049.1190631-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hds-thresh option configures the threshold value of
the header-data-split.
If a received packet size is larger than this threshold value, a packet
will be split into header and payload.
The header indicates TCP and UDP header, but it depends on driver spec.
The bnxt_en driver supports HDS(Header-Data-Split) configuration at
FW level, affecting TCP and UDP too.
So, If hds-thresh is set, it affects UDP and TCP packets.
Example:
# ethtool -G <interface name> hds-thresh <value>
# ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256
# ethtool -g enp14s0f0np0
Ring parameters for enp14s0f0np0:
Pre-set maximums:
...
HDS thresh: 1023
Current hardware settings:
...
TCP data split: on
HDS thresh: 256
The default/min/max values are not defined in the ethtool so the drivers
should define themself.
The 0 value means that all TCP/UDP packets' header and payload
will be split.
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When tcp-data-split is UNKNOWN mode, drivers arbitrarily handle it.
For example, bnxt_en driver automatically enables if at least one of
LRO/GRO/JUMBO is enabled.
If tcp-data-split is UNKNOWN and LRO is enabled, a driver returns
ENABLES of tcp-data-split, not UNKNOWN.
So, `ethtool -g eth0` shows tcp-data-split is enabled.
The problem is in the setting situation.
In the ethnl_set_rings(), it first calls get_ringparam() to get the
current driver's config.
At that moment, if driver's tcp-data-split config is UNKNOWN, it returns
ENABLE if LRO/GRO/JUMBO is enabled.
Then, it sets values from the user and driver's current config to
kernel_ethtool_ringparam.
Last it calls .set_ringparam().
The driver, especially bnxt_en driver receives
ETHTOOL_TCP_DATA_SPLIT_ENABLED.
But it can't distinguish whether it is set by the user or just the
current config.
When user updates ring parameter, the new hds_config value is updated
and current hds_config value is stored to old_hdsconfig.
Driver's .set_ringparam() callback can distinguish a passed
tcp-data-split value is came from user explicitly.
If .set_ringparam() is failed, hds_config is rollbacked immediately.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add POWER_SUPPLY_HEALTH_UNDERVOLTAGE status for power supply
to report under voltage lockout failures.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250108-starqltechn_integration_upstream-v14-1-f6e84ec20d96@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Pass the current neg_mode into phylink_mii_c22_pcs_get_state() and
phylink_mii_c22_pcs_decode_state(). Update all users of phylink PCS
that use these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeY-000Et9-8g@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding the new debugfs entry, its kdoc equivalent was forgotten.
Add it now.
Fixes: d06905d68610 ("i2c: add core-managed per-client directory in debugfs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250115163146.6c48f066@canb.auug.org.au
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
In order to let host controller drivers using the host-generic
infrastructure use the {en,dis}able_device() callbacks that can be used to
configure sideband RID mapping hardware, provide these two callbacks as
part of the pci_ecam_ops structure.
Link: https://lore.kernel.org/r/20241204150145.800408-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Now that x86 is converted over to use the IRQCHIP_MOVE_DEFERRED flags,
remove IRQ*_MOVE_PCNTXT and related code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210103335.626707225@linutronix.de
|
|
ktime_get_fast_timestamps() was added in 2020 by commit e2d977c9f1ab
("timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper")
but has remained unused.
Remove it.
[ tglx: Fold the inline as David suggested in the submission ]
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250112160132.450209-1-linux@treblig.org
|
|
Advanced SPI-NAND chips are capable of reading data much faster by
leveraging DTR support. This support extends to dual and quad
configurations.
Create macros defining all possible read from cache DTR variants:
- SPINAND_PAGE_READ_FROM_CACHE_DTR_OP
- SPINAND_PAGE_READ_FROM_CACHE_X2_DTR_OP
- SPINAND_PAGE_READ_FROM_CACHE_X4_DTR_OP
- SPINAND_PAGE_READ_FROM_CACHE_DUALIO_DTR_OP
- SPINAND_PAGE_READ_FROM_CACHE_QUADIO_DTR_OP
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
While the SPINAND_PAGE_READ_FROM_CACHE_FAST_OP macro is supposed to be
able to run at the flash highest supported frequency, it is not the case
of the regular read from cache, which may be limited in terms of maximum
frequency. Add an optional argument to this macro, which will be used to
set the maximum frequency, if any.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
So far, the SPINAND_PAGE_READ_FROM_CACHE_OP macro was taking a first
argument, "fast", which was inducing the possibility to support higher
bus frequencies than with the normal (slower) read from cache
alternative. In practice, without frequency change on the bus, this was
likely without effect, besides perhaps allowing another variant of the
same command, that could run at the default highest speed. If we want to
support this fully, we need to add a frequency parameter to the slowest
command. But before we do that, let's drop the "fast" boolean from the
macro and duplicate it, this will further help supporting having
different frequencies allowed for each variant.
The change is also of course propagated to all users. It has the nice
effect to have all macros aligned on the same pattern.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
spi: Support DTR in spi-mem
Changes to support DTR with spi-mem.
|
|
Some PCI host bridges require special handling when enabling or
disabling PCI devices. For example, the i.MX95 platform has a lookup
table to map Requester IDs to StreamIDs, which the SMMU and MSI
controller use to identify the source of DMA accesses.
Without this mapping, DMA accesses may target unintended memory, which
would corrupt memory or read the wrong data.
Add a host bridge enable_device() hook the imx6 driver can use to
configure the Requester ID to StreamID mapping. The hardware table isn't
big enough to map all possible Requester IDs, so this hook may fail if
no table space is available. In that case, return failure from
pci_enable_device().
It might make more sense to make pci_set_master() decline to enable bus
mastering and return failure, but it currently doesn't have a way to return
failure.
Link: https://lore.kernel.org/r/20250114-imx95_lut-v9-1-39f58dbed03a@nxp.com
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
For stacking atomic writes, ensure that the start sector is aligned with
the device atomic write unit min and any boundary. Otherwise, we may
permit misaligned atomic writes.
Rework bdev_can_atomic_write() into a common helper to resuse the
alignment check. There also use atomic_write_hw_unit_min, which is more
proper (than atomic_write_unit_min).
Fixes: d7f36dc446e89 ("block: Support atomic writes limits for stacked devices")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250109114000.2299896-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.14
The Qualcomm SCM drivers gains a number of fixes and improvements
related to race conditions during initialization. QSEECOM and the EFI
variable service therein is enabled for a few 8cx Gen 3 and X Elite
boards.
LLCC driver gains configuration for IPQ5424 and WRCACHE is enabled on X
Elite.
The BCM_TCS_CMD() macro is corrected and is cleaned up.
Support for SM7225 and X 1 Plus are added to the pd-mapper.
pmic_glink and the associated altmode driver are simplied using guards.
socinfo is added for QCS9075 and serial number readout on MSM8916
devices is corrected.
* tag 'qcom-drivers-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits)
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
soc: qcom: socinfo: add QCS9075 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS9075
soc: qcom: socinfo: Avoid out of bounds read of serial number
firmware: qcom: scm: Allow QSEECOM on Huawei Matebook E Go (sc8280xp)
firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
firmware: qcom: scm: Allow QSEECOM for HP Omnibook X14
soc: qcom: rmtfs: constify rmtfs_class
soc: qcom: rmtfs: allow building the module with COMPILE_TEST=y
soc: qcom: pmic_glink_altmode: simplify locking with guard()
soc: qcom: Rework BCM_TCS_CMD macro
...
Link: https://lore.kernel.org/r/20250111172901.391774-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes
TI SoC driver updates for v6.14
- Build fixup when CONFIG_TI_PRUSS is disabled.
|
|
Currently the platform filter cannot access any driver-specific state
which forces drivers installing a i8042 filter to have at least some
kind of global pointer for their filter.
Allow callers of i8042_install_filter() to submit a context pointer
which is then passed to the i8042 filter. This frees drivers from the
responsibility of having to manage this global pointer themself.
Also introduce a separate type for the i8042 filter (i8042_filter_t)
so that the function definitions can stay compact.
Tested on a Dell Inspiron 3505.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250113221314.435812-1-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for 6.14
This mainly has 2 updates:
1. Extension of the transport properties read from devicetree to support
multiple SCMI platform/server instances
2. Addition of the capability to automatically load the proper SCMI vendor
protocol module. The vendor protocol selection is already provided by
the SCMI core while the automatic loading of vendor protocols was not.
* tag 'scmi-updates-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add aliases to transport modules
firmware: arm_scmi: Add module aliases to i.MX vendor protocols
firmware: arm_scmi: Support vendor protocol modules autoloading
firmware: arm_scmi: Allow transport properties for multiple instances
Link: https://lore.kernel.org/r/20250102154024.2168165-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.14 - TI
TI AEMIF driver enhancements: some refactoring around timing
parameters and finally adding plus exporting interfaces for devices
using the AEMIF interface (e.g. TI Davinci NAND controller) to better
configure the memory interface.
The exported functions are going to be used by:
drivers/mtd/nand/raw/davinci_nand.c
* tag 'memory-controller-drv-ti-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: ti-aemif: Export aemif_*_cs_timings()
memory: ti-aemif: Create aemif_set_cs_timings()
memory: ti-aemif: Create aemif_check_cs_timings()
memory: ti-aemif: Wrap CS timings into a struct
memory: ti-aemif: Remove unnecessary local variables
memory: ti-aemif: Store timings parameter in number of cycles - 1
Link: https://lore.kernel.org/r/20241231133534.136771-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.14
1. OMAP GPMC: Cleanup dead code.
2. Tegra20 EMC: Fix OF reference counting when iterating over
emc-tables.
* tag 'memory-controller-drv-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra20-emc: fix an OF node reference bug in tegra_emc_find_node_by_ram_code()
memory: omap-gpmc: deadcode a pair of functions
Link: https://lore.kernel.org/r/20241231133534.136771-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Existing primitive has several problems:
1) calling conventions are clumsy - it returns a dentry reference
that is either identical to its second argument or is an ERR_PTR(-E...);
in both cases no refcount changes happen. Inconvenient for users and
bug-prone; it would be better to have it return 0 on success and -E... on
failure.
2) it allows cross-directory moves; however, no such caller have
ever materialized and considering the way debugfs is used, it's unlikely
to happen in the future. What's more, any such caller would have fun
issues to deal with wrt interplay with recursive removal. It also makes
the calling conventions clumsier...
3) tautological rename fails; the callers have no race-free way
to deal with that.
4) new name must have been formed by the caller; quite a few
callers have it done by sprintf/kasprintf/etc., ending up with considerable
boilerplate.
Proposed replacement: int debugfs_change_name(dentry, fmt, ...). All callers
convert to that easily, and it's simpler internally.
IMO debugfs_rename() should go; if we ever get a real-world use case for
cross-directory moves in debugfs, we can always look into the right way
to handle that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250112080705.141166-21-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20250112080705.141166-6-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set by debugfs_create_file_aux(name, mode, parent, data, aux, fops).
Plain debugfs_create_file() has it set to NULL.
Accessed by debugfs_get_aux(file).
Convenience macros for numeric opaque data - debugfs_create_file_aux_num
and debugfs_get_aux_num, resp.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20250112080705.141166-5-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The logic of GENERIC_PENDING_IRQ is backwards for historical reasons. Most
interrupt controllers allow to move the interrupt from arbitrary
contexts. If GENERIC_PENDING_IRQ is enabled by an architecture to support a
chip, which requires the affinity change to happen in interrupt context,
all other chips have to be marked with IRQF_MOVE_PCNTXT.
That's tedious and there is no real good reason for the extra flags in the
irq descriptor and the irq data status fields. In fact the decision whether
interrupts can be moved in arbitrary context or not is a property of the
interrupt chip.
To simplify adoption for RISC-V provide a new mechanism which is enabled
via a config switch and allows to add a flag to irq_chip::flags to request
that interrupt affinity changes are deferred. Setting the top level chip of
an interrupt evaluates the flag and maps it into the existing logic.
The config switch and the various PCNTXT flags are temporary until x86 is
converted over to this scheme. This intermediate step also allows trivial
backporting of the mechanism to plug the affinity change race of various
RISC-V interrupt controllers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210103335.500314436@linutronix.de
|
|
Now that there's no outer wrapper for __kvm_set_memory_region() and it's
static, drop its double-underscore prefix.
No functional change intended.
Cc: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a dedicated API for setting internal memslots, and have it explicitly
disallow setting userspace memslots. Setting a userspace memslots without
a direct command from userspace would result in all manner of issues.
No functional change intended.
Cc: Tao Su <tao1.su@linux.intel.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Open code kvm_set_memory_region() into its sole caller in preparation for
adding a dedicated API for setting internal memslots.
Oppurtunistically use the fancy new guard(mutex) to avoid a local 'r'
variable.
Cc: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250111002022.1230573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The last use of kernel_sendmsg_locked() was removed in 2023 by
commit dc97391e6610 ("sock: Remove ->sendpage*() in favour of
sendmsg(MSG_SPLICE_PAGES)")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250112131318.63753-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
eetlp_prefix_path in the struct pci_dev tells if End-End TLP Prefixes
are supported by the path or not, and the value is only calculated if
CONFIG_PCI_PASID is set.
The Max End-End TLP Prefixes field in the Device Capabilities Register 2
also tells how many (1-4) End-End TLP Prefixes are supported (PCIe r6.2 sec
7.5.3.15). The number of supported End-End Prefixes is useful for reading
correct number of DWORDs from TLP Prefix Log register in AER capability
(PCIe r6.2 sec 7.8.4.12).
Replace eetlp_prefix_path with eetlp_prefix_max and determine the number of
supported End-End Prefixes regardless of CONFIG_PCI_PASID so that an
upcoming commit generalizing TLP Prefix Log register reading does not have
to read extra DWORDs for End-End Prefixes that never will be there.
The value stored into eetlp_prefix_max is directly derived from device's
Max End-End TLP Prefixes and does not consider limitations imposed by
bridges or the Root Port beyond supported/not supported flags. This is
intentional for two reasons:
1) PCIe r6.2 spec sections 2.2.10.4 & 6.2.4.4 indicate that a TLP is
malformed only if the number of prefixes exceed the number of Max
End-End TLP Prefixes, which seems to be the case even if the device
could never receive that many prefixes due to smaller maximum imposed
by a bridge or the Root Port. If TLP parsing is later added, this
distinction is significant in interpreting what is logged by the TLP
Prefix Log registers and the value matching to the Malformed TLP
threshold is going to be more useful.
2) TLP Prefix handling happens autonomously on a low layer and the value
in eetlp_prefix_max is not programmed anywhere by the kernel (i.e.,
there is no limiter OS can control to prevent sending more than N TLP
Prefixes).
Link: https://lore.kernel.org/r/20250114170840.1633-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
|
|
Add defines for AER and DPC capabilities TLP Header Logging register sizes
(PCIe r6.2, sec 7.8.4 / 7.9.14) and replace literals with them.
Link: https://lore.kernel.org/r/20250114170840.1633-4-ilpo.jarvinen@linux.intel.com
Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pcie_read_tlp_log() was exposed by the commit 0a5a46a6a61b ("PCI/AER:
Generalize TLP Header Log reading") with the intent that drivers could use
it, but the PCI maintainer later decided that drivers should be encouraged
to use PCI core diagnostic logging of generic AER registers rather than
building their own.
Drivers that currently implement their own diagnostic logging include ixgbe
(ixgbe_io_error_detected()) and iwlwifi (iwl_trans_pcie_dump_regs()).
Remove the unwanted EXPORT of pcie_read_tlp_log() and remove it from
include/linux/aer.h.
Link: https://lore.kernel.org/r/20250114170840.1633-2-ilpo.jarvinen@linux.intel.com
Link: https://lore.kernel.org/all/20240322193011.GA701027@bhelgaas/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"Fix a randconfig failure:
- Unconditionally define stub for !CONFIG_SECCOMP (Linus Walleij)"
* tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Stub for !CONFIG_SECCOMP
|
|
Re-enabling NFSv3 LOCALIO is made more complex (than NFSv4) because v3
is stateless. As such, the hueristic used to identify a LOCALIO probe
point is more adhoc by nature: if/when NFSv3 client IO begins to
complete again in terms of normal RPC-based NFSv3 server IO, attempt
nfs_local_probe_async().
Care is taken to throttle the frequency of nfs_local_probe_async(),
otherwise there could be a flood of repeat calls to
nfs_local_probe_async().
The throttle is admin controlled using a new module parameter for
nfsv3, e.g.:
echo 512 > /sys/module/nfsv3/parameters/nfs3_localio_probe_throttle
Probe for NFSv3 LOCALIO every N IO requests (512 in this case). Must
be power-of-2, defaults to 0 (probing disabled).
On systems that expect to use LOCALIO with NFSv3 the admin should
configure the 'nfs3_localio_probe_throttle' module parameter.
This commit backfills module parameter documentation in localio.rst
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Introduce nfs_local_probe_async() for the NFS client to initiate
if/when it reconnects with server. For NFSv4 it is a simple matter to
call nfs_local_probe_async() from nfs4_do_reclaim (during NFSv4
grace).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Remove nfs_local_enable and nfs_local_disable, instead use
nfs_localio_enable_client and nfs_localio_disable_client.
Discontinue use of the NFS_CS_LOCAL_IO bit in the nfs_client struct's
cl_flags to reflect that LOCALIO is enabled; instead just test if the
net member of the nfs_uuid_t struct is set.
Also remove NFS_CS_LOCAL_IO.
Lastly, remove trace_nfs_local_enable and trace_nfs_local_disable
because comparable traces are available from nfs_localio.ko.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This tracking enables __nfsd_file_cache_purge() to call
nfs_localio_invalidate_clients(), upon shutdown or export change, to
nfs_close_local_fh() all open nfsd_files that are still cached by the
LOCALIO nfs clients associated with nfsd_net that is being shutdown.
Now that the client must track all open nfsd_files there was more work
than necessary being done with the global nfs_uuids_lock contended.
This manifested in various RCU issues, e.g.:
hrtimer: interrupt took 47969440 ns
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
Use nfs_uuid->lock to protect all nfs_uuid_t members, instead of
nfs_uuids_lock, once nfs_uuid_is_local() adds the client to
nn->local_clients.
Also add 'local_clients_lock' to 'struct nfsd_net' to protect
nn->local_clients. And store a pointer to spinlock in the 'list_lock'
member of nfs_uuid_t so nfs_localio_disable_client() can use it to
avoid taking the global nfs_uuids_lock.
In combination, these split out locks eliminate the use of the single
nfslocalio.c global nfs_uuids_lock in the IO paths (open and close).
Also refactored associated fs/nfs_common/nfslocalio.c methods' locking
to reduce work performed with spinlocks held in general.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Also update Documentation/filesystems/nfs/localio.rst accordingly
and reduce the technical documentation debt that was previously
captured in that document.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This commit switches from leaning heavily on NFSD's filecache (in
terms of GC'd nfsd_files) back to caching nfsd_files in the
client. A later commit will add the callback mechanism needed to
allow NFSD to force the NFS client to cleanup all cached nfsd_files.
Add nfs_fh_localio_init() and 'struct nfs_fh_localio' to cache opened
nfsd_file(s) (both a RO and RW nfsd_file is able to be opened and
cached for a given nfs_fh).
Update nfs_local_open_fh() to cache the nfsd_file once it is opened
using __nfs_local_open_fh().
Introduce nfs_close_local_fh() to clear the cached open nfsd_files and
call nfs_to_nfsd_file_put_local().
Refcounting is such that:
- nfs_local_open_fh() is paired with nfs_close_local_fh().
- __nfs_local_open_fh() is paired with nfs_to_nfsd_file_put_local().
- nfs_local_file_get() is paired with nfs_local_file_put().
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Remove cl_localio_lock from 'struct nfs_client' in favor of adding a
lock to the nfs_uuid_t struct (which is embedded in each nfs_client).
Push nfs_local_{enable,disable} implementation down to nfs_common.
Those methods now call nfs_localio_{enable,disable}_client.
This allows implementing nfs_localio_invalidate_clients in terms of
nfs_localio_disable_client.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Rename nfs_uuid_invalidate_one_client to nfs_localio_disable_client.
Rename nfs_uuid_invalidate_clients to nfs_localio_invalidate_clients.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
In later a commit LOCALIO must call both nfsd_file_get and
nfsd_file_put to manage extra nfsd_file references.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This commit simply adds the required O_DIRECT plumbing. It doesn't
address the fact that NFS doesn't ensure all writes are page aligned
(nor device logical block size aligned as required by O_DIRECT).
Because NFS will read-modify-write for IO that isn't aligned, LOCALIO
will not use O_DIRECT semantics by default if/when an application
requests the use of O_DIRECT. Allow the use of O_DIRECT semantics by:
1: Adding a flag to the nfs_pgio_header struct to allow the NFS
O_DIRECT layer to signal that O_DIRECT was used by the application
2: Adding a 'localio_O_DIRECT_semantics' NFS module parameter that
when enabled will cause LOCALIO to use O_DIRECT semantics (this may
cause IO to fail if applications do not properly align their IO).
This commit is derived from code developed by Weston Andros Adamson.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-01-14
The following pull-request contains mlx5 IFC updates.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add nic_cap_reg and vhca_icm_ctrl registers
net/mlx5: SHAMPO: Introduce new SHAMPO specific HCA caps
net/mlx5: Add support for MRTCQ register
net/mlx5: Update mlx5_ifc to support FEC for 200G per lane link modes
====================
Link: https://patch.msgid.link/20250114055700.1928736-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kobj_ns_initial() and kobj_ns_netlink() were adde din 2010 by
commit bc451f205823 ("kobj: Add basic infrastructure for dealing with
namespaces.")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250112144907.270272-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Seen the following build error:
./include/linux/prmt.h:5:27: error: unknown type name ‘guid_t’
5 | int acpi_call_prm_handler(guid_t handler_guid, void *param_buffer);
| ^~~~~~
The include file uses guid_t but it is not declared. Include
linux/uuid.h to fix this.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://patch.msgid.link/20250107161923.3387552-1-rrichter@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove PSE-specific structures from the ethtool header to improve code
modularity, maintain independent headers, and reduce incremental build
time.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
