| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc7).
Conflicts:
a42d71e322a8 ("net_sched: sch_cake: Add drop reasons")
737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts")
Adjacent changes:
drivers/net/ethernet/meta/fbnic/fbnic.h
3a856ab34726 ("eth: fbnic: add IRQ reuse support")
95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link: https://lore.kernel.org/all/173371207108.480397.12818384744149153972.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Remove misplaced colon in stm32_firewall_get_firewall()
which results in a syntax error when the code is compiled
without CONFIG_STM32_FIREWALL.
Fixes: 5c9668cfc6d7 ("firewall: introduce stm32_firewall framework")
Signed-off-by: guanjing <guanjing@cmss.chinamobile.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We do have macros for defining command, address, dummy and data
cycles. We also have a .dtr flag that implies sampling the bus on both
edges, but there are currently no macros enabling it. We might make use
of such macros, so let's create:
- SPI_MEM_DTR_OP_CMD
- SPI_MEM_DTR_OP_ADDR
- SPI_MEM_DTR_OP_DUMMY
- SPI_MEM_DTR_OP_DATA_OUT
- SPI_MEM_DTR_OP_DATA_OUT
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-19-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow the order in which all the `struct spi_mem_op` members are
defined.
This is purely aesthetics, there is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-18-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are spi devices with multiple frequency limitations depending on
the invoked command. We probably do not want to afford running at the
lowest supported frequency all the time, so if we want to get the most
of our hardware, we need to allow per-operation frequency limitations.
Among all the SPI memory controllers, I believe all are capable of
changing the spi frequency on the fly. Some of the drivers do not make
any frequency setup though. And some others will derive a per chip
prescaler value which will be used forever.
Actually changing the frequency on the fly is something new in Linux, so
we need to carefully flag the drivers which do and do not support it. A
controller capability is created for that, and the presence for this
capability will always be checked before accepting such pattern.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-2-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the spi subsystem, the bus frequency is derived as follows:
- the controller may expose a minimum and maximum operating frequency
- the hardware description, through the spi peripheral properties,
advise what is the maximum acceptable frequency from a device/wiring
point of view.
Transfers must be observed at a frequency which fits both (so in
practice, the lowest maximum).
Actually, this second point mixes two information and already takes the
lowest frequency among:
- what the spi device is capable of (what is written in the component
datasheet)
- what the wiring allows (electromagnetic sensibility, crossovers,
terminations, antenna effect, etc).
This logic works until spi devices are no longer capable of sustaining
their highest frequency regardless of the operation. Spi memories are
typically subject to such variation. Some devices are capable of
spitting their internally stored data (essentially in read mode) at a
very fast rate, typically up to 166MHz on Winbond SPI-NAND chips, using
"fast" commands. However, some of the low-end operations, such as
regular page read-from-cache commands, are more limited and can only be
executed at 54MHz at most. This is currently a problem in the SPI-NAND
subsystem. Another situation, even if not yet supported, will be with
DTR commands, when the data is latched on both edges of the clock. The
same chips as mentioned previously are in this case limited to
80MHz. Yet another example might be continuous reads, which, under
certain circumstances, can also run at most at 104 or 120MHz.
As a matter of fact, the "one frequency per chip" policy is outdated and
more fine grain configuration is needed: we need to allow per-operation
frequency limitations. So far, all datasheets I encountered advertise a
maximum default frequency, which need to be lowered for certain specific
operations. So based on the current infrastructure, we can still expect
firmware (device trees in general) to continued advertising the same
maximum speed which is a mix between the PCB limitations and the chip
maximum capability, and expect per-operation lower frequencies when this
is relevant.
Add a `struct spi_mem_op` member to carry this information. Not
providing this field explicitly from upper layers means that there is no
further constraint and the default spi device maximum speed will be
carried instead. The SPI_MEM_OP() macro is also expanded with an
optional frequency argument, because virtually all operations can be
subject to such a limitation, and this will allow for a smooth and
discrete transition.
For controller drivers which do not implement the spi-mem interface, the
per-transfer speed is also set acordingly to a lower (than the maximum
default) speed when relevant.
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-1-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes.
Besides the one-liners in Btrfs there's fix to the io_uring and
encoded read integration (added in this development cycle). The update
to io_uring provides more space for the ongoing command that is then
used in Btrfs to handle some cases.
- io_uring and encoded read:
- provide stable storage for io_uring command data
- make a copy of encoded read ioctl call, reuse that in case the
call would block and will be called again
- properly initialize zlib context for hardware compression on s390
- fix max extent size calculation on filesystems with non-zoned
devices
- fix crash in scrub on crafted image due to invalid extent tree"
* tag 'for-6.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zlib: fix avail_in bytes for s390 zlib HW compression path
btrfs: zoned: calculate max_extent_size properly on non-zoned setup
btrfs: avoid NULL pointer dereference if no valid extent tree
btrfs: don't read from userspace twice in btrfs_uring_encoded_read()
io_uring: add io_uring_cmd_get_async_data helper
io_uring/cmd: add per-op data to struct io_uring_cmd_data
io_uring/cmd: rename struct uring_cache to io_uring_cmd_data
|
|
Bring in the fix for the mount namespace rbtree. It is used as the base
for the vfs mount work for this cycle and so shouldn't be applied
directly.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently there is no primitive for retrieving the previous list member.
To do this we need a new deletion primitive that doesn't poison the prev
pointer and a corresponding retrieval helper. Note that it is not valid
to ues both list_del_rcu() and list_bidir_del_rcu() on the same list.
Link: https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-4-6e3cdaf9b280@kernel.org
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move mnt->mnt_node into the union with mnt->mnt_rcu and mnt->mnt_llist
instead of keeping it with mnt->mnt_list. This allows us to use
RB_CLEAR_NODE(&mnt->mnt_node) in umount_tree() as well as
list_empty(&mnt->mnt_node). That in turn allows us to remove MNT_ONRB.
This also fixes the bug reported in [1] where seemingly MNT_ONRB wasn't
set in @mnt->mnt_flags even though the mount was present in the mount
rbtree of the mount namespace.
The root cause is the following race. When a btrfs subvolume is mounted
a temporary mount is created:
btrfs_get_tree_subvol()
{
mnt = fc_mount()
// Register the newly allocated mount with sb->mounts:
lock_mount_hash();
list_add_tail(&mnt->mnt_instance, &mnt->mnt.mnt_sb->s_mounts);
unlock_mount_hash();
}
and registered on sb->s_mounts. Later it is added to an anonymous mount
namespace via mount_subvol():
-> mount_subvol()
-> mount_subtree()
-> alloc_mnt_ns()
mnt_add_to_ns()
vfs_path_lookup()
put_mnt_ns()
The mnt_add_to_ns() call raises MNT_ONRB in @mnt->mnt_flags. If someone
concurrently does a ro remount:
reconfigure_super()
-> sb_prepare_remount_readonly()
{
list_for_each_entry(mnt, &sb->s_mounts, mnt_instance) {
}
all mounts registered in sb->s_mounts are visited and first
MNT_WRITE_HOLD is raised, then MNT_READONLY is raised, and finally
MNT_WRITE_HOLD is removed again.
The flag modification for MNT_WRITE_HOLD/MNT_READONLY and MNT_ONRB race
so MNT_ONRB might be lost.
Fixes: 2eea9ce4310d ("mounts: keep list of mounts in an rbtree")
Cc: <stable@kernel.org> # v6.8+
Link: https://lore.kernel.org/r/20241215-vfs-6-14-mount-work-v1-1-fd55922c4af8@kernel.org
Link: https://lore.kernel.org/r/ec6784ed-8722-4695-980a-4400d4e7bd1a@gmx.com [1]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a separate dio read align field, as many out of place write
file systems can easily do reads aligned to the device sector size,
but require bigger alignment for writes.
This is usually papered over by falling back to buffered I/O for smaller
writes and doing read-modify-write cycles, but performance for this
sucks, so applications benefit from knowing the actual write alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-3-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add support to export device operating states, such as laptop placement,
platform types and propagate this data to AMD PMF driver for use in
actions.
To retrieve the device operating states data, SRA sensor support need to
be enabled in AMD SFH driver. So add support to enable the SRA sensor.
Also, remove explicit assignments to sensor_index enum.
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Basavaraj Natikar <basavaraj.natikar@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241217151627.757477-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The overflow_work is using system wq to do overflow checks and updates
for PHC device timecounter, which might be overhelmed by other tasks.
But there is dedicated kthread in PTP subsystem designed for such
things. This patch changes the work queue to proper align with PTP
subsystem and to avoid overloading system work queue.
The adjfine() function acts the same way as overflow check worker,
we can postpone ptp aux worker till the next overflow period after
adjfine() was called.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The platform driver is dead code. It is not used by DT platforms since
commit bdb0066df96e ("mfd: syscon: Decouple syscon interface from
platform devices") which said:
For non-DT based platforms, this patch keeps syscon platform driver
structure so that syscon can be probed and such non-DT based drivers
can use syscon_regmap_lookup_by_pdev API and access regmap handles.
Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based,
we can completely remove platform driver of syscon, and keep only helper
functions to get regmap handles.
The last user of syscon_regmap_lookup_by_pdevname() was removed in 2018.
syscon_regmap_lookup_by_pdevname() was then removed in 2019, but that
commit failed to remove the rest of the platform driver.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241217-syscon-fixes-v2-2-4f56d750541d@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
These macros are not used by the driver, and the structs are accounted
for with the addition of the linux/regmap.h file.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20241217204935.1012106-3-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Most users use this function through the BIN_ATTR_SIMPLE* macros,
they can handle the switch transparently.
Also adapt the two non-macro users in the same change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Tested-by: Aditya Gupta <adityag@linux.ibm.com>
Link: https://lore.kernel.org/r/20241228-sysfs-const-bin_attr-simple-v2-1-7c6f3f1767a3@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel QuickI2C driver uses THC hardware to accelerate HID over I2C
(HIDI2C) protocol flow.
This patch implements all data flows described in HID over I2C protocol
SPEC by using THC hardware layer APIs.
HID over I2C SPEC:
https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn642101(v=vs.85)
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add HID Low level driver callbacks and hid probe function to register
QucikI2C as a HID driver, and external touch device as a HID device.
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Intel QuickSPI driver uses THC hardware to accelerate HID over SPI
(HIDSPI) protocol flow.
This patch implements all data flows described in HID over SPI protocol
SPEC by using THC hardware layer APIs.
HID over SPI SPEC:
https://www.microsoft.com/download/details.aspx?id=103325
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add HID Low level driver callbacks and hid probe function to register
QucikSPI as a HID driver, and external touch device as a HID device.
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ishtp_cl_tx_empty() was added in 2018 by
commit a1c40ce62fd2 ("HID: intel-ish-hid: ishtp: add helper functions for
client buffer operation") but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac77 ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add helper functions for the SCM calls required to support
hardware-wrapped inline storage encryption keys. These SCM calls manage
wrapped keys via Qualcomm's Hardware Key Manager (HWKM), which can only
be accessed from TrustZone.
QCOM_SCM_ES_GENERATE_ICE_KEY and QCOM_SCM_ES_IMPORT_ICE_KEY create a new
long-term wrapped key, with the former making the hardware generate the
key and the latter importing a raw key. QCOM_SCM_ES_PREPARE_ICE_KEY
converts the key to ephemerally-wrapped form so that it can be used for
inline storage encryption. These are planned to be wired up to new
ioctls via the blk-crypto framework; see the proposed documentation for
the hardware-wrapped keys feature for more information.
Similarly there's also QCOM_SCM_ES_DERIVE_SW_SECRET which derives a
"software secret" from an ephemerally-wrapped key and will be wired up
to the corresponding operation in the blk_crypto_profile.
These will all be used by the ICE driver in drivers/soc/qcom/ice.c.
[EB: merged related patches, fixed error handling, fixed naming, fixed
docs for size parameters, fixed qcom_scm_has_wrapped_key_support(),
improved comments, improved commit message.]
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20241213041958.202565-9-ebiggers@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When using !CONFIG_SECCOMP with CONFIG_GENERIC_ENTRY, the
randconfig bots found the following snag:
kernel/entry/common.c: In function 'syscall_trace_enter':
>> kernel/entry/common.c:52:23: error: implicit declaration
of function '__secure_computing' [-Wimplicit-function-declaration]
52 | ret = __secure_computing(NULL);
| ^~~~~~~~~~~~~~~~~~
Since generic entry calls __secure_computing() unconditionally,
fix this by moving the stub out of the ifdef clause for
CONFIG_HAVE_ARCH_SECCOMP_FILTER so it's always available.
Link: https://lore.kernel.org/oe-kbuild-all/202501061240.Fzk9qiFZ-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250108-seccomp-stub-2-v2-1-74523d49420f@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Fix a buffer overflow issue in qcom_clear_bam_transaction by using
struct_group to group related fields and avoid FORTIFY_SOURCE warnings.
On x86 architecture, the following error occurs due to warnings being
treated as errors:
In function ‘fortify_memset_chk’,
inlined from ‘qcom_clear_bam_transaction’ at
drivers/mtd/nand/qpic_common.c:88:2:
./include/linux/fortify-string.h:480:25: error: call to ‘__write_overflow_field’
declared with attribute warning: detected write beyond size of field
(1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
480 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LD [M] drivers/mtd/nand/nandcore.o
CC [M] drivers/w1/masters/mxc_w1.o
cc1: all warnings being treated as errors
This patch addresses the issue by grouping the related fields in
struct bam_transaction using struct_group and updating the memset call
accordingly.
Fixes: 8c52932da5e6 ("mtd: rawnand: qcom: cleanup qcom_nandc driver")
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
automatic format
kthread_create_on_cpu() uses the CPU argument as an implicit and unique
printf argument to add to the format whereas
kthread_create_worker_on_cpu() still relies on explicitly passing the
printf arguments. This difference in behaviour is error prone and
doesn't help standardizing per-CPU kthread names.
Unify the behaviours and convert kthread_create_worker_on_cpu() to
use the printf behaviour of kthread_create_on_cpu().
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Affining kthreads follow either of four existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations.
2) Kthreads that _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug operations.
3) Kthreads that prefer to be affine to a specific NUMA node. That
preferred affinity is applied by default when an actual node ID is
passed on kthread creation, provided the kthread is not per-CPU and
no call to kthread_bind_mask() has been issued before the first
wake-up.
4) Similar to the previous point but kthreads have a preferred affinity
different than a node. It is set manually like any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
preferred affinity comes up. Also care must be taken so that the
preferred affinity doesn't cross housekeeping cpumask boundaries.
Provide a function to handle the last usecase, mostly reusing the
current node default affinity infrastructure. kthread_affine_preferred()
is introduced, to be used just like kthread_bind_mask(), right after
kthread creation and before the first wake up. The kthread is then
affine right away to the cpumask passed through the API if it has online
housekeeping CPUs. Otherwise it will be affine to all online
housekeeping CPUs as a last resort.
As with node affinity, it is aware of CPU hotplug events such that:
* When a housekeeping CPU goes up that is part of the preferred affinity
of a given kthread, the related task is re-affined to that preferred
affinity if it was previously running on the default last resort
online housekeeping set.
* When a housekeeping CPU goes down while it was part of the preferred
affinity of a kthread, the running task is migrated (or the sleeping
task is woken up) automatically by the scheduler to other housekeepers
within the preferred affinity or, as a last resort, to all
housekeepers from other nodes.
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Kthreads attached to a preferred NUMA node for their task structure
allocation can also be assumed to run preferrably within that same node.
A more precise affinity is usually notified by calling
kthread_create_on_cpu() or kthread_bind[_mask]() before the first wakeup.
For the others, a default affinity to the node is desired and sometimes
implemented with more or less success when it comes to deal with hotplug
events and nohz_full / CPU Isolation interactions:
- kcompactd is affine to its node and handles hotplug but not CPU Isolation
- kswapd is affine to its node and ignores hotplug and CPU Isolation
- A bunch of drivers create their kthreads on a specific node and
don't take care about affining further.
Handle that default node affinity preference at the generic level
instead, provided a kthread is created on an actual node and doesn't
apply any specific affinity such as a given CPU or a custom cpumask to
bind to before its first wake-up.
This generic handling is aware of CPU hotplug events and CPU isolation
such that:
* When a housekeeping CPU goes up that is part of the node of a given
kthread, the related task is re-affined to that own node if it was
previously running on the default last resort online housekeeping set
from other nodes.
* When a housekeeping CPU goes down while it was part of the node of a
kthread, the running task is migrated (or the sleeping task is woken
up) automatically by the scheduler to other housekeepers within the
same node or, as a last resort, to all housekeepers from other nodes.
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
When a kthread or any other task has an affinity mask that is fully
offline or unallowed, the scheduler reaffines the task to all possible
CPUs as a last resort.
This default decision doesn't mix up very well with nohz_full CPUs that
are part of the possible cpumask but don't want to be disturbed by
unbound kthreads or even detached pinned user tasks.
Make the fallback affinity setting aware of nohz_full.
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
IOCTL_VMCI_SOCKETS_VERSION and IOCTL_VMCI_SOCKETS_GET_AF_VALUE were
never implemented, because VSOCK ended up being implemented as a
generic mechanism with a static AF value. Likewise,
IOCTL_VMCI_SOCKETS_GET_LOCAL_CID ended up being implemented as
IOCTL_VM_SOCKETS_GET_LOCAL_CID.
This isn't a UAPI header, so it should be fine to remove the unused
values. I've left a comment noting IOCTL_VM_SOCKETS_GET_LOCAL_CID is
in the VMCI range to avoid unintentional reuse.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Acked-by: Vishnu Dasa <vishnu.dasa@broadcom.com>
Link: https://lore.kernel.org/r/fzdcrz4yfedokmbm22h2iwsluix4jwejwaltuwcdr6kz3yu6eu@nue5xc6ayevo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sometimes one needs to be able not only to catch PPS signals but to
produce them also. For example, running a distributed simulation,
which requires computers' clock to be synchronized very tightly.
This patch adds PPS generators class in order to have a well-defined
interface for these devices.
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/20241108073115.759039-2-giometti@enneenne.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This helps several of my boards in CI.
|
|
This definition is in the wrong file; it is part of the TLFS doc.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1732577084-2122-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1732577084-2122-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
While merging net to net-next I noticed that the kdoc above
__vlan_get_protocol_offset() has the wrong function name.
Fix that and all the other kdoc warnings in this file.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250106174620.1855269-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit d7811e623dd4 ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add support for more sizes and then update
the rt722 driver to use the new support. We also add support for
the deferring feature of MBQs to allow hardware to indicate it is
not currently ready to service a read/write.
Afraid I don't have hardware to test the rt722 change so it is
only build tested, but I thought it good to include a change to
demonstrate the new features in use.
|
|
There are no more board file users of this driver. The platform data
structure is only used internally. Two of the four fields it stores are
not used at all anymore. Pull the remainder into the driver data struct
and shrink code by removing parts that are now dead code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241211102337.37956-1-brgl@bgdev.pl
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The SDCA specification allows for controls to be deferred. In the case
of a deferred control the device will return COMMAND_IGNORED to the
8-bit operation that would cause the value to commit. Which is the
final 8-bits on a write, or the first 8-bits on a read. In the case of
receiving a defer, the regmap will poll the SDCA function busy bit,
after which the transaction will be retried, returning an error if the
function busy does not clear within a chip specific timeout. Since
this is common SDCA functionality which is the 99% use-case for MBQs
it makes sense to incorporate this functionality into the register
map. If no MBQ configuration is specified, the behaviour will default
to the existing behaviour.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-5-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SoundWire MBQ register maps typically contain a variety of register
sizes, which doesn't map ideally to the regmap abstraction which
expects register maps to have a consistent size. Currently the MBQ
register map only allows 16-bit registers to be defined, however
this leads to complex CODEC driver implementations with an 8-bit
register map and a 16-bit MBQ, every control will then have a custom
get and put handler that allows them to access different register
maps. Further more 32-bit MBQ quantities are not currently supported.
Add support for additional MBQ sizes and to avoid the complexity
of multiple register maps treat the val_size as a maximum size for
the register map. Within the regmap use an ancillary callback to
determine how many bytes to actually read/write to the hardware for
a specific register. In the case that no callback is defined the
behaviour defaults back to the existing behaviour of a fixed size
register map.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-4-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Compliment the existing macro to construct an SDCA control address
with macros to extract the constituent parts, and validation of such
an address. Also update the masks for the original macro to use
GENMASK to make mental comparisons with the included comment on the
address format easier.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-2-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Secure TSC in SNP-enabled guests. Secure TSC allows guests
to securely use RDTSC/RDTSCP instructions, ensuring that the parameters used
cannot be altered by the hypervisor once the guest is launched.
Secure TSC-enabled guests need to query TSC information from the AMD Security
Processor. This communication channel is encrypted between the AMD Security
Processor and the guest, with the hypervisor acting merely as a conduit to
deliver the guest messages to the AMD Security Processor. Each message is
protected with AEAD (AES-256 GCM).
[ bp: Zap a stray newline over amd_cc_platform_has() while at it,
simplify CC_ATTR_GUEST_SNP_SECURE_TSC check ]
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-6-nikunj@amd.com
|
|
Add poll syscall support on the `hist` file. The Waiter will be waken
up when the histogram is updated with POLLIN.
Currently, there is no way to wait for a specific event in userspace.
So user needs to peek the `trace` periodicaly, or wait on `trace_pipe`.
But it is not a good idea to peek at the `trace` for an event that
randomly happens. And `trace_pipe` is not coming back until a page is
filled with events.
This allows a user to wait for a specific event on the `hist` file. User
can set a histogram trigger on the event which they want to monitor
and poll() on its `hist` file. Since this poll() returns POLLIN, the next
poll() will return soon unless a read() happens on that hist file.
NOTE: To read the hist file again, you must set the file offset to 0,
but just for monitoring the event, you may not need to read the
histogram.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527247756.464571.14236296701625509931.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
As there is only one in-tree user, avoid a transition phase and switch
that user in the same commit. As there are some interdependencies
between the constness of the different symbols in the s390 driver,
covert the whole driver at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241205-sysfs-const-bin_attr-groups_macro-v1-1-ac5e855031e8@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add an io-pgtable method to walk the pgtable returning the raw PTEs that
would be traversed for a given iova access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241210165127.600817-4-robdclark@gmail.com
[will: Removed 'arm_lpae_io_pgtable_walk_data::level' per Mostafa]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837e6 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1
Fixes: d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source.")
Cc: stable@vger.kernel.org
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add an adreno-smmu-priv interface for drm/msm to call into arm-smmu-qcom
and initiate the "Partially Resident Region" (PRR) bit setup or reset
sequence as per request.
This will be used by GPU to setup the PRR bit and related configuration
registers through adreno-smmu private interface instead of directly
poking the smmu hardware.
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-4-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
rtnl_lock_killable() is used only in register_netdev()
and will be converted to per-netns RTNL.
Let's unexport it and add the corresponding helper.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xpcs_get_interfaces() should no longer be used outside of the XPCS
code, so make it static.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tTffk-007Roi-JM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
