| Age | Commit message (Collapse) | Author |
|---|
|
There are no users anymore. All potential future users are expected to
use power_supply_for_each_psy().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-6-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
All existing callers of power_supply_for_each_device() want to iterate
over 'struct power_supply', not 'struct device'.
The power_supply_for_each_device() forces each caller to duplicate the
logic to go from one to the other.
Introduce power_supply_for_each_psy() to simplify the callers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241210-power-supply-dev_to_psy-v2-2-9d8c9d24cfe4@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Currently, the pointer stored in call->prog_array is loaded in
__uprobe_perf_func(), with no RCU annotation and no immediately visible
RCU protection, so it looks as if the loaded pointer can immediately be
dangling.
Later, bpf_prog_run_array_uprobe() starts a RCU-trace read-side critical
section, but this is too late. It then uses rcu_dereference_check(), but
this use of rcu_dereference_check() does not actually dereference anything.
Fix it by aligning the semantics to bpf_prog_run_array(): Let the caller
provide rcu_read_lock_trace() protection and then load call->prog_array
with rcu_dereference_check().
This issue seems to be theoretical: I don't know of any way to reach this
code without having handle_swbp() further up the stack, which is already
holding a rcu_read_lock_trace() lock, so where we take
rcu_read_lock_trace() in __uprobe_perf_func()/bpf_prog_run_array_uprobe()
doesn't actually have any effect.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-uprobe-uaf-v4-1-5fc8959b2b74@google.com
|
|
When processing calls to global sub-programs, verifier decides whether
to invalidate all packet pointers in current state depending on the
changes_pkt_data property of the global sub-program.
Because of this, an extension program replacing a global sub-program
must be compatible with changes_pkt_data property of the sub-program
being replaced.
This commit:
- adds changes_pkt_data flag to struct bpf_prog_aux:
- this flag is set in check_cfg() for main sub-program;
- in jit_subprogs() for other sub-programs;
- modifies bpf_check_attach_btf_id() to check changes_pkt_data flag;
- moves call to check_attach_btf_id() after the call to check_cfg(),
because it needs changes_pkt_data flag to be set:
bpf_check:
... ...
- check_attach_btf_id resolve_pseudo_ldimm64
resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded
bpf_prog_is_offloaded check_cfg
check_cfg + check_attach_btf_id
... ...
The following fields are set by check_attach_btf_id():
- env->ops
- prog->aux->attach_btf_trace
- prog->aux->attach_func_name
- prog->aux->attach_func_proto
- prog->aux->dst_trampoline
- prog->aux->mod
- prog->aux->saved_dst_attach_type
- prog->aux->saved_dst_prog_type
- prog->expected_attach_type
Neither of these fields are used by resolve_pseudo_ldimm64() or
bpf_prog_offload_verifier_prep() (for netronome and netdevsim
drivers), so the reordering is safe.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation.
Reported-by: Nick Zavaritsky <mejedi@gmail.com>
Closes: https://lore.kernel.org/bpf/0498CA22-5779-4767-9C0C-A9515CEA711F@gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When two profile handlers don't agree on the current profile it's ambiguous
what to show to the legacy sysfs interface.
Add a "custom" profile string that userspace will be able to use the legacy
sysfs interface to distinguish this situation..
Additionally drivers can choose to use this to indicate that a user has
modified driver settings in a way that the platform profile advertised by
a driver is not accurate.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-17-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When registering a platform profile handler create a class device
that will allow changing a single platform profile handler.
The class and sysfs group are no longer needed when the platform profile
core is a module and unloaded, so remove them at that time as well.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-11-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The profile handler will be used to notify the appropriate class
devices.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-6-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
platform_profile_remove()
To allow registering and unregistering multiple platform handlers calls
to platform_profile_remove() will need to know which handler is to be
removed. Add an argument for this.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-5-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In order to let platform profile handlers manage platform profile
for their driver the core code will need a pointer to the device.
Add this to the structure and use it in the trivial driver cases.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-4-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In order to prepare for allowing multiple handlers, introduce
a name field that can be used to distinguish between different
handlers.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-2-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This isn't used outside this file. Hide the array in the C file.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241204194806.2665589-1-swboyd@chromium.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Zone write plugging for handling writes to zones of a zoned block
device always execute a zone report whenever a write BIO to a zone
fails. The intent of this is to ensure that the tracking of a zone write
pointer is always correct to ensure that the alignment to a zone write
pointer of write BIOs can be checked on submission and that we can
always correctly emulate zone append operations using regular write
BIOs.
However, this error recovery scheme introduces a potential deadlock if a
device queue freeze is initiated while BIOs are still plugged in a zone
write plug and one of these write operation fails. In such case, the
disk zone write plug error recovery work is scheduled and executes a
report zone. This in turn can result in a request allocation in the
underlying driver to issue the report zones command to the device. But
with the device queue freeze already started, this allocation will
block, preventing the report zone execution and the continuation of the
processing of the plugged BIOs. As plugged BIOs hold a queue usage
reference, the queue freeze itself will never complete, resulting in a
deadlock.
Avoid this problem by completely removing from the zone write plugging
code the use of report zones operations after a failed write operation,
instead relying on the device user to either execute a report zones,
reset the zone, finish the zone, or give up writing to the device (which
is a fairly common pattern for file systems which degrade to read-only
after write failures). This is not an unreasonnable requirement as all
well-behaved applications, FSes and device mapper already use report
zones to recover from write errors whenever possible by comparing the
current position of a zone write pointer with what their assumption
about the position is.
The changes to remove the automatic error recovery are as follows:
- Completely remove the error recovery work and its associated
resources (zone write plug list head, disk error list, and disk
zone_wplugs_work work struct). This also removes the functions
disk_zone_wplug_set_error() and disk_zone_wplug_clear_error().
- Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into
BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write
plug whenever a write opration targetting the zone of the zone write
plug fails. This flag indicates that the zone write pointer offset is
not reliable and that it must be updated when the next report zone,
reset zone, finish zone or disk revalidation is executed.
- Modify blk_zone_write_plug_bio_endio() to set the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed
write BIO.
- Modify the function disk_zone_wplug_set_wp_offset() to clear this
new flag, thus implementing recovery of a correct write pointer
offset with the reset (all) zone and finish zone operations.
- Modify blkdev_report_zones() to always use the disk_report_zones_cb()
callback so that disk_zone_wplug_sync_wp_offset() can be called for
any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag.
This implements recovery of a correct write pointer offset for zone
write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within
the range of the report zones operation executed by the user.
- Modify blk_revalidate_seq_zone() to call
disk_zone_wplug_sync_wp_offset() for all sequential write required
zones when a zoned block device is revalidated, thus always resolving
any inconsistency between the write pointer offset of zone write
plugs and the actual write pointer position of sequential zones.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The zone reclaim processing of the dm-zoned device mapper uses
blkdev_issue_zeroout() to align the write pointer of a zone being used
for reclaiming another zone, to write the valid data blocks from the
zone being reclaimed at the same position relative to the zone start in
the reclaim target zone.
The first call to blkdev_issue_zeroout() will try to use hardware
offload using a REQ_OP_WRITE_ZEROES operation if the device reports a
non-zero max_write_zeroes_sectors queue limit. If this operation fails
because of the lack of hardware support, blkdev_issue_zeroout() falls
back to using a regular write operation with the zero-page as buffer.
Currently, such REQ_OP_WRITE_ZEROES failure is automatically handled by
the block layer zone write plugging code which will execute a report
zones operation to ensure that the write pointer of the target zone of
the failed operation has not changed and to "rewind" the zone write
pointer offset of the target zone as it was advanced when the write zero
operation was submitted. So the REQ_OP_WRITE_ZEROES failure does not
cause any issue and blkdev_issue_zeroout() works as expected.
However, since the automatic recovery of zone write pointers by the zone
write plugging code can potentially cause deadlocks with queue freeze
operations, a different recovery must be implemented in preparation for
the removal of zone write plugging report zones based recovery.
Do this by introducing the new function blk_zone_issue_zeroout(). This
function first calls blkdev_issue_zeroout() with the flag
BLKDEV_ZERO_NOFALLBACK to intercept failures on the first execution
which attempt to use the device hardware offload with the
REQ_OP_WRITE_ZEROES operation. If this attempt fails, a report zone
operation is issued to restore the zone write pointer offset of the
target zone to the correct position and blkdev_issue_zeroout() is called
again without the BLKDEV_ZERO_NOFALLBACK flag. The report zones
operation performing this recovery is implemented using the helper
function disk_zone_sync_wp_offset() which calls the gendisk report_zones
file operation with the callback disk_report_zones_cb(). This callback
updates the target write pointer offset of the target zone using the new
function disk_zone_wplug_sync_wp_offset().
dmz_reclaim_align_wp() is modified to change its call to
blkdev_issue_zeroout() to a call to blk_zone_issue_zeroout() without any
other change needed as the two functions are functionnally equivalent.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The rseq uapi requires cooperation between users of the rseq fields
to ensure that all libraries and applications using rseq within a
process do not interfere with each other.
This is especially important for fields which are meant to be read-only
from user-space, as documented in uapi/linux/rseq.h:
- cpu_id_start,
- cpu_id,
- node_id,
- mm_cid.
Storing to those fields from a user-space library prevents any sharing
of the rseq ABI with other libraries and applications, as other users
are not aware that the content of those fields has been altered by a
third-party library.
This is unfortunately the current behavior of tcmalloc: it purposefully
overlaps part of a cached value with the cpu_id_start upper bits to get
notified about preemption, because the kernel clears those upper bits
before returning to user-space. This behavior does not conform to the
rseq uapi header ABI.
This prevents tcmalloc from using rseq when rseq is registered by the
GNU C library 2.35+. It requires tcmalloc users to disable glibc rseq
registration with a glibc tunable, which is a sad state of affairs.
Considering that tcmalloc and the GNU C library are the two first
upstream projects using rseq, and that they are already incompatible due
to use of this hack, adding kernel-level validation of all read-only
fields content is necessary to ensure future users of rseq abide by the
rseq ABI requirements.
Validate that user-space does not corrupt the read-only fields and
conform to the rseq uapi header ABI when the kernel is built with
CONFIG_DEBUG_RSEQ=y. This is done by storing a copy of the read-only
fields in the task_struct, and validating the prior values present in
user-space before updating them. If the values do not match, print
a warning on the console (printk_ratelimited()).
This is a first step to identify misuses of the rseq ABI by printing
a warning on the console. After a giving some time to userspace to
correct its use of rseq, the plan is to eventually terminate offending
processes with SIGSEGV.
This change is expected to produce warnings for the upstream tcmalloc
implementation, but tcmalloc developers mentioned they were open to
adapt their implementation to kernel-level change.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://github.com/google/tcmalloc/issues/144
|
|
Commit 422f2d418186 ("arm64: dts: qcom: Drop undocumented domain
"idle-state-name"") brought to light the common misbelief that
idle-state-names also applies to e.g. PSCI power domain idle states.
Make that a reality, mimicking the property name used by cpuidle
states.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Message-ID: <20241130-topic-idle_state_name-v1-2-d0ff67b0c8e9@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
With FAN_DENY response, user trying to perform the filesystem operation
gets an error with errno set to EPERM.
It is useful for hierarchical storage management (HSM) service to be able
to deny access for reasons more diverse than EPERM, for example EAGAIN,
if HSM could retry the operation later.
Allow fanotify groups with priority FAN_CLASSS_PRE_CONTENT to responsd
to permission events with the response value FAN_DENY_ERRNO(errno),
instead of FAN_DENY to return a custom error.
Limit custom error values to errors expected on read(2)/write(2) and
open(2) of regular files. This list could be extended in the future.
Userspace can test for legitimate values of FAN_DENY_ERRNO(errno) by
writing a response to an fanotify group fd with a value of FAN_NOFD in
the fd field of the response.
The change in fanotify_response is backward compatible, because errno is
written in the high 8 bits of the 32bit response field and old kernels
reject respose value with high bits set.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/1e5fb6af84b69ca96b5c849fa5f10bdf4d1dc414.1731684329.git.josef@toxicpanda.com
|
|
Similar to FAN_ACCESS_PERM permission event, but it is only allowed with
class FAN_CLASS_PRE_CONTENT and only allowed on regular files and dirs.
Unlike FAN_ACCESS_PERM, it is safe to write to the file being accessed
in the context of the event handler.
This pre-content event is meant to be used by hierarchical storage
managers that want to fill the content of files on first read access.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/b80986f8d5b860acea2c9a73c0acd93587be5fe4.1731684329.git.josef@toxicpanda.com
|
|
Generate FS_PRE_ACCESS event before truncate, without sb_writers held.
Move the security hooks also before sb_start_write() to conform with
other security hooks (e.g. in write, fallocate).
The event will have a range info of the page surrounding the new size
to provide an opportunity to fill the conetnt at the end of file before
truncating to non-page aligned size.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/23af8201db6ac2efdea94f09ab067d81ba5de7a7.1731684329.git.josef@toxicpanda.com
|
|
We would like to add file range information to pre-content events.
Pass a struct file_range with offset and length to event handler
along with pre-content permission event.
The offset and length are aligned to page size, but we may need to
align them to minimum folio size for filesystems with large block size.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/88eddee301231d814aede27fb4d5b41ae37c9702.1731684329.git.josef@toxicpanda.com
|
|
The new FS_PRE_ACCESS permission event is similar to FS_ACCESS_PERM,
but it meant for a different use case of filling file content before
access to a file range, so it has slightly different semantics.
Generate FS_PRE_ACCESS/FS_ACCESS_PERM as two seperate events, so content
scanners could inspect the content filled by pre-content event handler.
Unlike FS_ACCESS_PERM, FS_PRE_ACCESS is also called before a file is
modified by syscalls as write() and fallocate().
FS_ACCESS_PERM is reported also on blockdev and pipes, but the new
pre-content events are only reported for regular files and dirs.
The pre-content events are meant to be used by hierarchical storage
managers that want to fill the content of files on first access.
There are some specific requirements from filesystems that could
be used with pre-content events, so add a flag for fs to opt-in
for pre-content events explicitly before they can be used.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/b934c5e3af205abc4e0e4709f6486815937ddfdf.1731684329.git.josef@toxicpanda.com
|
|
Avoid reusing it, because we would like to reserve it for future
FAN_PATH_MODIFY pre-content event.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/632d9f80428e2e7a6b6a8ccc2925d87c92bbb518.1731684329.git.josef@toxicpanda.com
|
|
So far, we set FMODE_NONOTIFY_ flags at open time if we know that there
are no permission event watchers at all on the filesystem, but lack of
FMODE_NONOTIFY_ flags does not mean that the file is actually watched.
For pre-content events, it is possible to optimize things so that we
don't bother trying to send pre-content events if file was not watched
(through sb, mnt, parent or inode itself) on open. Set FMODE_NONOTIFY_
flags according to that.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/2ddcc9f8d1fde48d085318a6b5a889289d8871d8.1731684329.git.josef@toxicpanda.com
|
|
Legacy inotify/fanotify listeners can add watches for events on inode,
parent or mount and expect to get events (e.g. FS_MODIFY) on files that
were already open at the time of setting up the watches.
fanotify permission events are typically used by Anti-malware sofware,
that is watching the entire mount and it is not common to have more that
one Anti-malware engine installed on a system.
To reduce the overhead of the fsnotify_file_perm() hooks on every file
access, relax the semantics of the legacy FAN_ACCESS_PERM event to generate
events only if there were *any* permission event listeners on the
filesystem at the time that the file was opened.
The new semantic is implemented by extending the FMODE_NONOTIFY bit into
two FMODE_NONOTIFY_* bits, that are used to store a mode for which of the
events types to report.
This is going to apply to the new fanotify pre-content events in order
to reduce the cost of the new pre-content event vfs hooks.
[Thanks to Bert Karwatzki <spasswolf@web.de> for reporting a bug in this
code with CONFIG_FANOTIFY_ACCESS_PERMISSIONS disabled]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wj8L=mtcRTi=NECHMGfZQgXOp_uix1YVh04fEmrKaMnXA@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/5ea5f8e283d1edb55aa79c35187bfe344056af14.1731684329.git.josef@toxicpanda.com
|
|
Using the pattern 'scmi-protocol-0x<PROTO_ID>-<VEND_ID>' as MODULE_ALIAS
allows the SCMI core to autoload this protocol, if built as a module, when
its protocol operations are requested by an SCMI driver.
Cc: Peng Fan <peng.fan@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241209164957.1801886-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When virtqueue_reset() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when it really occurs.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtqueue_resize() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when the recycle really occurs.
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The R1B response type with ignoring CRC is used in the mmc_cqe_recovery(),
introduce the MMC_RSP_R1B_NO_CRC response type to simplify the code.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Message-ID: <20241126125041.16071-2-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The MMC_RSP_R1_NO_CRC type of response is not being used by the mmc core
for any commands. Let's therefore drop it, together with the corresponding
code in the host drivers.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for TMIO
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Message-ID: <20241125132311.23939-1-ulf.hansson@linaro.org>
|
|
The error detection of the data aggregation feature is separated from
the compression/decompression feature. This patch enables the error
detection and reporting of the data aggregation feature. When an
unrecoverable error occurs in the algorithm core, the device reports
the error to the driver, and the driver will reset the device.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The zip device adds data aggregation feature, data with the
same key can be combined.
This patch enables the device data aggregation feature.
New feature is called "hashagg" name and registered to
the uacce subsystem to allow applications to submit data
aggregation operations in user space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The RGMII interface supports three data rates: 10/100 Mbps
and 1 Gbps. These speeds correspond to clock frequencies
of 2.5/25 MHz and 125 MHz, respectively.
Many Ethernet drivers, including glues in stmmac, follow
a similar pattern of converting RGMII speed to clock frequency.
To simplify code, define the helper rgmii_clock(speed)
to convert connection speed to clock frequency.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-4-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The clock API clk_get_rate() returns unsigned long value.
Expand affected members of stmmac platform data and
convert the stmmac_clk_csr_set() and dwmac4_core_init() methods
to defining the unsigned long clk_rate local variables.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-3-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for CSR clock range up to 800 MHz.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-2-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The comment in declaration of STMMAC_CSR_250_300M
incorrectly describes the constant as '/* MDC = clk_scr_i/122 */'
but the DWC Ether QOS Handbook version 5.20a says it is
CSR clock/124.
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-1-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kernel-doc -Wall warns about missing Return: statement for non-void
functions. We have a number of kdocs in our headers which are missing
the colon, IOW they use
* Return some value
or
* Returns some value
Having the colon makes some sense, it should help kdoc parser avoid
false positives. So add them. This is mostly done with a sed script,
and removing the unnecessary cases (mostly the comments which aren't
kdoc).
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20241205165914.1071102-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a us_to_ktime() helper to go with ms_to_ktime() and ns_to_ktime().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Thomas Gleixner <tglx@linutronix.de>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Export the aemif_set_cs_timing() and aemif_check_cs_timing() symbols so
they can be used by other drivers
Add a mutex to protect the CS configuration register from concurrent
accesses between the AEMIF and its 'children'.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-7-bastien.curutchet@bootlin.com
[krzysztof: wrap aemif_set_cs_timings() at 80-char]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is
fully initialized, we can hit the panic below:
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_utils
...
BUG: kernel NULL pointer dereference, address: 0000000000000000
CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1
RIP: 0010:hv_pkt_iter_first+0x12/0xd0
Call Trace:
...
vmbus_recvpacket
hv_kvp_onchannelcallback
vmbus_on_event
tasklet_action_common
tasklet_action
handle_softirqs
irq_exit_rcu
sysvec_hyperv_stimer0
</IRQ>
<TASK>
asm_sysvec_hyperv_stimer0
...
kvp_register_done
hvt_op_read
vfs_read
ksys_read
__x64_sys_read
This can happen because the KVP/VSS channel callback can be invoked
even before the channel is fully opened:
1) as soon as hv_kvp_init() -> hvutil_transport_init() creates
/dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and
register itself to the driver by writing a message KVP_OP_REGISTER1 to the
file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and
reading the file for the driver's response, which is handled by
hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done().
2) the problem with kvp_register_done() is that it can cause the
channel callback to be called even before the channel is fully opened,
and when the channel callback is starting to run, util_probe()->
vmbus_open() may have not initialized the ringbuffer yet, so the
callback can hit the panic of NULL pointer dereference.
To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in
__vmbus_open(), just before the first hv_ringbuffer_init(), and then we
unload and reload the driver hv_utils, and run the daemon manually within
the 10 seconds.
Fix the panic by reordering the steps in util_probe() so the char dev
entry used by the KVP or VSS daemon is not created until after
vmbus_open() has completed. This reordering prevents the race condition
from happening.
Reported-by: Dexuan Cui <decui@microsoft.com>
Fixes: e0fa3e5e7df6 ("Drivers: hv: utils: fix a race on userspace daemons registration")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20241106154247.2271-3-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241106154247.2271-3-mhklinux@outlook.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Remove if_not_guard() as it is generating incorrect code
- Fix the initialization of the fake lockdep_map for the first locked
ww_mutex
* tag 'locking_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
headers/cleanup.h: Remove the if_not_guard() facility
locking/ww_mutex: Fix ww_mutex dummy lockdep map selftest warnings
|
|
While at it, rename the same function in s390 cpum_sf PMU.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20241203180441.1634709-2-namhyung@kernel.org
|
|
Instead of constantly allocating and freeing very short-lived
struct return_instance, reuse it as much as possible within current
task. For that, store a linked list of reusable return_instances within
current->utask.
The only complication is that ri_timer() might be still processing such
return_instance. And so while the main uretprobe processing logic might
be already done with return_instance and would be OK to immediately
reuse it for the next uretprobe instance, it's not correct to
unconditionally reuse it just like that.
Instead we make sure that ri_timer() can't possibly be processing it by
using seqcount_t, with ri_timer() being "a writer", while
free_ret_instance() being "a reader". If, after we unlink return
instance from utask->return_instances list, we know that ri_timer()
hasn't gotten to processing utask->return_instances yet, then we can be
sure that immediate return_instance reuse is OK, and so we put it
onto utask->ri_pool for future (potentially, almost immediate) reuse.
This change shows improvements both in single CPU performance (by
avoiding relatively expensive kmalloc/free combon) and in terms of
multi-CPU scalability, where you can see that per-CPU throughput doesn't
decline as steeply with increased number of CPUs (which were previously
attributed to kmalloc()/free() through profiling):
BASELINE (latest perf/core)
===========================
uretprobe-nop ( 1 cpus): 1.898 ± 0.002M/s ( 1.898M/s/cpu)
uretprobe-nop ( 2 cpus): 3.574 ± 0.011M/s ( 1.787M/s/cpu)
uretprobe-nop ( 3 cpus): 5.279 ± 0.066M/s ( 1.760M/s/cpu)
uretprobe-nop ( 4 cpus): 6.824 ± 0.047M/s ( 1.706M/s/cpu)
uretprobe-nop ( 5 cpus): 8.339 ± 0.060M/s ( 1.668M/s/cpu)
uretprobe-nop ( 6 cpus): 9.812 ± 0.047M/s ( 1.635M/s/cpu)
uretprobe-nop ( 7 cpus): 11.030 ± 0.048M/s ( 1.576M/s/cpu)
uretprobe-nop ( 8 cpus): 12.453 ± 0.126M/s ( 1.557M/s/cpu)
uretprobe-nop (10 cpus): 14.838 ± 0.044M/s ( 1.484M/s/cpu)
uretprobe-nop (12 cpus): 17.092 ± 0.115M/s ( 1.424M/s/cpu)
uretprobe-nop (14 cpus): 19.576 ± 0.022M/s ( 1.398M/s/cpu)
uretprobe-nop (16 cpus): 22.264 ± 0.015M/s ( 1.391M/s/cpu)
uretprobe-nop (24 cpus): 33.534 ± 0.078M/s ( 1.397M/s/cpu)
uretprobe-nop (32 cpus): 43.262 ± 0.127M/s ( 1.352M/s/cpu)
uretprobe-nop (40 cpus): 53.252 ± 0.080M/s ( 1.331M/s/cpu)
uretprobe-nop (48 cpus): 55.778 ± 0.045M/s ( 1.162M/s/cpu)
uretprobe-nop (56 cpus): 56.850 ± 0.227M/s ( 1.015M/s/cpu)
uretprobe-nop (64 cpus): 62.005 ± 0.077M/s ( 0.969M/s/cpu)
uretprobe-nop (72 cpus): 66.445 ± 0.236M/s ( 0.923M/s/cpu)
uretprobe-nop (80 cpus): 68.353 ± 0.180M/s ( 0.854M/s/cpu)
THIS PATCHSET (on top of latest perf/core)
==========================================
uretprobe-nop ( 1 cpus): 2.253 ± 0.004M/s ( 2.253M/s/cpu)
uretprobe-nop ( 2 cpus): 4.281 ± 0.003M/s ( 2.140M/s/cpu)
uretprobe-nop ( 3 cpus): 6.389 ± 0.027M/s ( 2.130M/s/cpu)
uretprobe-nop ( 4 cpus): 8.328 ± 0.005M/s ( 2.082M/s/cpu)
uretprobe-nop ( 5 cpus): 10.353 ± 0.001M/s ( 2.071M/s/cpu)
uretprobe-nop ( 6 cpus): 12.513 ± 0.010M/s ( 2.086M/s/cpu)
uretprobe-nop ( 7 cpus): 14.525 ± 0.017M/s ( 2.075M/s/cpu)
uretprobe-nop ( 8 cpus): 15.633 ± 0.013M/s ( 1.954M/s/cpu)
uretprobe-nop (10 cpus): 19.532 ± 0.011M/s ( 1.953M/s/cpu)
uretprobe-nop (12 cpus): 21.405 ± 0.009M/s ( 1.784M/s/cpu)
uretprobe-nop (14 cpus): 24.857 ± 0.020M/s ( 1.776M/s/cpu)
uretprobe-nop (16 cpus): 26.466 ± 0.018M/s ( 1.654M/s/cpu)
uretprobe-nop (24 cpus): 40.513 ± 0.222M/s ( 1.688M/s/cpu)
uretprobe-nop (32 cpus): 54.180 ± 0.074M/s ( 1.693M/s/cpu)
uretprobe-nop (40 cpus): 66.100 ± 0.082M/s ( 1.652M/s/cpu)
uretprobe-nop (48 cpus): 70.544 ± 0.068M/s ( 1.470M/s/cpu)
uretprobe-nop (56 cpus): 74.494 ± 0.055M/s ( 1.330M/s/cpu)
uretprobe-nop (64 cpus): 79.317 ± 0.029M/s ( 1.239M/s/cpu)
uretprobe-nop (72 cpus): 84.875 ± 0.020M/s ( 1.179M/s/cpu)
uretprobe-nop (80 cpus): 92.318 ± 0.224M/s ( 1.154M/s/cpu)
For reference, with uprobe-nop we hit the following throughput:
uprobe-nop (80 cpus): 143.485 ± 0.035M/s ( 1.794M/s/cpu)
So now uretprobe stays a bit closer to that performance.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20241206002417.3295533-5-andrii@kernel.org
|
|
In practice, each return_instance will typically contain either zero or
one return_consumer, depending on whether it has any uprobe session
consumer attached or not. It's highly unlikely that more than one uprobe
session consumers will be attached to any given uprobe, so there is no
need to optimize for that case. But the way we currently do memory
allocation and accounting is by pre-allocating the space for 4 session
consumers in contiguous block of memory next to struct return_instance
fixed part. This is unnecessarily wasteful.
This patch changes this to keep struct return_instance fixed-sized with one
pre-allocated return_consumer, while (in a highly unlikely scenario)
allowing for more session consumers in a separate dynamically
allocated and reallocated array.
We also simplify accounting a bit by not maintaining a separate
temporary capacity for consumers array, and, instead, relying on
krealloc() to be a no-op if underlying memory can accommodate a slightly
bigger allocation (but again, it's very uncommon scenario to even have
to do this reallocation).
All this gets rid of ri_size(), simplifies push_consumer() and removes
confusing ri->consumers_cnt re-assignment, while containing this
singular preallocated consumer logic contained within a few simple
preexisting helpers.
Having fixed-sized struct return_instance simplifies and speeds up
return_instance reuse that we ultimately add later in this patch set,
see follow up patches.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20241206002417.3295533-2-andrii@kernel.org
|
|
Add the PMIC pca9452 support, which add ldo3 compared with pca9451a.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241205-pca9450-v1-4-aab448b74e78@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the kernels own generic lib/muldi3.c implementation of muldi3 for
68K machines. Some 68K CPUs support 64bit multiplies so move the arch
specific umul_ppmm() macro into a header file that is included by
lib/muldi3.c. That way it can take advantage of the single instruction
when available.
There does not appear to be any existing mechanism for the generic
lib/muldi3.c code to pick up an external arch definition of umul_ppmm().
Create an arch specific libgcc.h that can optionally be included by
the system include/linux/libgcc.h to allow for this.
Somewhat oddly there is also a similar definition of umul_ppmm() in
the non-architecture code in lib/crypto/mpi/longlong.h for a wide range
or machines. Its presence ends up complicating the include setup and
means not being able to use something like compiler.h instead. Actually
there is a few other defines of umul_ppmm() macros spread around in
various architectures, but not directly usable for the m68k case.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/20231113133209.1367286-1-gerg@linux-m68k.org
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
All it takes to get rid of the __FMODE_NONOTIFY kludge is switching
fanotify from anon_inode_getfd() to anon_inode_getfile_fmode() and adding
a dentry_open_nonotify() helper to be used by fanotify on the other path.
That's it - no more weird shit in OPEN_FMODE(), etc.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/linux-fsdevel/20241113043003.GH3387508@ZenIV/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/d1231137e7b661a382459e79a764259509a4115d.1731684329.git.josef@toxicpanda.com
|
|
Cross-merge bpf fixes after downstream PR.
Trivial conflict:
tools/testing/selftests/bpf/prog_tests/verifier.c
Adjacent changes in:
Auto-merging kernel/bpf/verifier.c
Auto-merging samples/bpf/Makefile
Auto-merging tools/testing/selftests/bpf/.gitignore
Auto-merging tools/testing/selftests/bpf/Makefile
Auto-merging tools/testing/selftests/bpf/prog_tests/verifier.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle the case where clocksources with small counter width can,
in conjunction with overly long idle sleeps, falsely trigger the
negative motion detection of clocksources
* tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Make negative motion detection more robust
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
|
