| Age | Commit message (Collapse) | Author |
|---|
|
The Felix DSA driver presents unique challenges that make the simplistic
ocelot PTP TX timestamping procedure unreliable: any transmitted packet
may be lost in hardware before it ever leaves our local system.
This may happen because there is congestion on the DSA conduit, the
switch CPU port or even user port (Qdiscs like taprio may delay packets
indefinitely by design).
The technical problem is that the kernel, i.e. ocelot_port_add_txtstamp_skb(),
runs out of timestamp IDs eventually, because it never detects that
packets are lost, and keeps the IDs of the lost packets on hold
indefinitely. The manifestation of the issue once the entire timestamp
ID range becomes busy looks like this in dmesg:
mscc_felix 0000:00:00.5: port 0 delivering skb without TX timestamp
mscc_felix 0000:00:00.5: port 1 delivering skb without TX timestamp
At the surface level, we need a timeout timer so that the kernel knows a
timestamp ID is available again. But there is a deeper problem with the
implementation, which is the monotonically increasing ocelot_port->ts_id.
In the presence of packet loss, it will be impossible to detect that and
reuse one of the holes created in the range of free timestamp IDs.
What we actually need is a bitmap of 63 timestamp IDs tracking which one
is available. That is able to use up holes caused by packet loss, but
also gives us a unique opportunity to not implement an actual timer_list
for the timeout timer (very complicated in terms of locking).
We could only declare a timestamp ID stale on demand (lazily), aka when
there's no other timestamp ID available. There are pros and cons to this
approach: the implementation is much more simple than per-packet timers
would be, but most of the stale packets would be quasi-leaked - not
really leaked, but blocked in driver memory, since this algorithm sees
no reason to free them.
An improved technique would be to check for stale timestamp IDs every
time we allocate a new one. Assuming a constant flux of PTP packets,
this avoids stale packets being blocked in memory, but of course,
packets lost at the end of the flux are still blocked until the flux
resumes (nobody left to kick them out).
Since implementing per-packet timers is way too complicated, this should
be good enough.
Testing procedure:
Persistently block traffic class 5 and try to run PTP on it:
$ tc qdisc replace dev swp3 parent root taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0xdf 100000 flags 0x2
[ 126.948141] mscc_felix 0000:00:00.5: port 3 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
$ ptp4l -i swp3 -2 -P -m --socket_priority 5 --fault_reset_interval ASAP --logSyncInterval -3
ptp4l[70.351]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.354]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[70.358]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 70.394583] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[70.406]: timed out while polling for tx timestamp
ptp4l[70.406]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[70.406]: port 1 (swp3): send peer delay response failed
ptp4l[70.407]: port 1 (swp3): clearing fault immediately
ptp4l[70.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 71.394858] mscc_felix 0000:00:00.5: port 3 timestamp id 1
ptp4l[71.400]: timed out while polling for tx timestamp
ptp4l[71.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[71.401]: port 1 (swp3): send peer delay response failed
ptp4l[71.401]: port 1 (swp3): clearing fault immediately
[ 72.393616] mscc_felix 0000:00:00.5: port 3 timestamp id 2
ptp4l[72.401]: timed out while polling for tx timestamp
ptp4l[72.402]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[72.402]: port 1 (swp3): send peer delay response failed
ptp4l[72.402]: port 1 (swp3): clearing fault immediately
ptp4l[72.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 73.395291] mscc_felix 0000:00:00.5: port 3 timestamp id 3
ptp4l[73.400]: timed out while polling for tx timestamp
ptp4l[73.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[73.400]: port 1 (swp3): send peer delay response failed
ptp4l[73.400]: port 1 (swp3): clearing fault immediately
[ 74.394282] mscc_felix 0000:00:00.5: port 3 timestamp id 4
ptp4l[74.400]: timed out while polling for tx timestamp
ptp4l[74.401]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[74.401]: port 1 (swp3): send peer delay response failed
ptp4l[74.401]: port 1 (swp3): clearing fault immediately
ptp4l[74.953]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 75.396830] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 75.405760] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[75.410]: timed out while polling for tx timestamp
ptp4l[75.411]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[75.411]: port 1 (swp3): send peer delay response failed
ptp4l[75.411]: port 1 (swp3): clearing fault immediately
(...)
Remove the blocking condition and see that the port recovers:
$ same tc command as above, but use "sched-entry S 0xff" instead
$ same ptp4l command as above
ptp4l[99.489]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.490]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[99.492]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE
[ 100.403768] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost
[ 100.412545] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 1 which seems lost
[ 100.421283] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 2 which seems lost
[ 100.430015] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 3 which seems lost
[ 100.438744] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 4 which seems lost
[ 100.447470] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 100.505919] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[100.963]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1
[ 101.405077] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 101.507953] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.405405] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 102.509391] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.406003] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 103.510011] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.405601] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 104.510624] mscc_felix 0000:00:00.5: port 3 timestamp id 0
ptp4l[104.965]: selected best master clock d858d7.fffe.00ca6d
ptp4l[104.966]: port 1 (swp3): assuming the grand master role
ptp4l[104.967]: port 1 (swp3): LISTENING to GRAND_MASTER on RS_GRAND_MASTER
[ 105.106201] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.232420] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.359001] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.405500] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.485356] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.511220] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.610938] mscc_felix 0000:00:00.5: port 3 timestamp id 0
[ 105.737237] mscc_felix 0000:00:00.5: port 3 timestamp id 0
(...)
Notice that in this new usage pattern, a non-congested port should
basically use timestamp ID 0 all the time, progressing to higher numbers
only if there are unacknowledged timestamps in flight. Compare this to
the old usage, where the timestamp ID used to monotonically increase
modulo OCELOT_MAX_PTP_ID.
In terms of implementation, this simplifies the bookkeeping of the
ocelot_port :: ts_id and ptp_skbs_in_flight. Since we need to traverse
the list of two-step timestampable skbs for each new packet anyway, the
information can already be computed and does not need to be stored.
Also, ocelot_port->tx_skbs is always accessed under the switch-wide
ocelot->ts_id_lock IRQ-unsafe spinlock, so we don't need the skb queue's
lock and can use the unlocked primitives safely.
This problem was actually detected using the tc-taprio offload, and is
causing trouble in TSN scenarios, which Felix (NXP LS1028A / VSC9959)
supports but Ocelot (VSC7514) does not. Thus, I've selected the commit
to blame as the one adding initial timestamping support for the Felix
switch.
Fixes: c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241205145519.1236778-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull io_uring fix from Jens Axboe:
"A single fix for a parameter type which affects 32-bit"
* tag 'io_uring-6.13-20241207' of git://git.kernel.dk/linux:
io_uring: Change res2 parameter type in io_uring_cmd_done
|
|
Use the right name of the function, which is defined in
drivers/iio/industrialio-buffer.c
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-11-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch removes elements from adis.h that are documented
but not used anymore.
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20241125133520.24328-2-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Align the irq_line field in struct ad_sigma_delta with the other fields.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241122-iio-adc-ad_signal_delta-fix-align-v1-1-d0a071d2dc83@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Linus noticed that the new if_not_guard() definition is fragile:
"This macro generates actively wrong code if it happens to be inside an
if-statement or a loop without a block.
IOW, code like this:
for (iterate-over-something)
if_not_guard(a)
return -BUSY;
looks like will build fine, but will generate completely incorrect code."
The reason is that the __if_not_guard() macro is multi-statement, so
while most kernel developers expect macros to be simple or at least
compound statements - but for __if_not_guard() it is not so:
#define __if_not_guard(_name, _id, args...) \
BUILD_BUG_ON(!__is_cond_ptr(_name)); \
CLASS(_name, _id)(args); \
if (!__guard_ptr(_name)(&_id))
To add insult to injury, the placement of the BUILD_BUG_ON() line makes
the macro appear to compile fine, but it will generate incorrect code
as Linus reported, for example if used within iteration or conditional
statements that will use the first statement of a macro as a loop body
or conditional statement body.
[ I'd also like to note that the original submission by David Lechner did
not contain the BUILD_BUG_ON() line, so it was safer than what we ended
up committing. Mea culpa. ]
It doesn't appear to be possible to turn this macro into a robust
single or compound statement that could be used in single statements,
due to the necessity to define an auto scope variable with an open
scope and the necessity of it having to expand to a partial 'if'
statement with no body.
Instead of trying to work around this fragility, just remove the
construct before it gets used.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z1LBnX9TpZLR5Dkf@gmail.com
|
|
Currently vrf is the only module that uses NETDEV_PCPU_STAT_DSTATS.
In order to make this kind of statistics available to other modules,
we need to define the update functions in netdevice.h.
Therefore, let's define dev_dstats_*() functions for RX and TX packet
updates (packets, bytes and drops). Use these new functions in vrf.c
instead of vrf_rx_stats() and the other manual counter updates.
While there, update the type of the "len" variables to "unsigned int",
so that there're aligned with both skb->len and the new dstats update
functions.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/d7a552ee382c79f4854e7fcc224cf176cd21150d.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers to genphy_c45_eee_is_active() now pass NULL as the
is_enabled argument, which means we never use the value computed
in this function. Remove the argument and clean up this function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/E1tJ9JC-006LIt-Ne@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a kernel-doc warning by making the kernel-doc function description
match the function name:
include/linux/scatterlist.h:323: warning: expecting prototype for sg_unmark_bus_address(). Prototype was for sg_dma_unmark_bus_address() instead
Link: https://lkml.kernel.org/r/20241130022406.537973-1-rdunlap@infradead.org
Fixes: 42399301203e ("lib/scatterlist: add flag for indicating P2PDMA segments in an SGL")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current solution to adjust codetag references during page migration is
done in 3 steps:
1. sets the codetag reference of the old page as empty (not pointing
to any codetag);
2. subtracts counters of the new page to compensate for its own
allocation;
3. sets codetag reference of the new page to point to the codetag of
the old page.
This does not work if CONFIG_MEM_ALLOC_PROFILING_DEBUG=n because
set_codetag_empty() becomes NOOP. Instead, let's simply swap codetag
references so that the new page is referencing the old codetag and the old
page is referencing the new codetag. This way accounting stays valid and
the logic makes more sense.
Link: https://lkml.kernel.org/r/20241129025213.34836-1-00107082@163.com
Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()")
Signed-off-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/
Acked-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Per documentation, stack_depot_save_flags() was meant to be usable from
NMI context if STACK_DEPOT_FLAG_CAN_ALLOC is unset. However, it still
would try to take the pool_lock in an attempt to save a stack trace in the
current pool (if space is available).
This could result in deadlock if an NMI is handled while pool_lock is
already held. To avoid deadlock, only try to take the lock in NMI context
and give up if unsuccessful.
The documentation is fixed to clearly convey this.
Link: https://lkml.kernel.org/r/Z0CcyfbPqmxJ9uJH@elver.google.com
Link: https://lkml.kernel.org/r/20241122154051.3914732-1-elver@google.com
Fixes: 4434a56ec209 ("stackdepot: make fast paths lock-less again")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is unsafe to call PageTail() in dump_page() as page_is_fake_head() will
almost certainly return true when called on a head page that is copied to
the stack. That will cause the VM_BUG_ON_PGFLAGS() in const_folio_flags()
to trigger when it shouldn't. Fortunately, we don't need to call
PageTail() here; it's fine to have a pointer to a virtual alias of the
page's flag word rather than the real page's flag word.
Link: https://lkml.kernel.org/r/20241125201721.2963278-1-willy@infradead.org
Fixes: fae7d834c43c ("mm: add __dump_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To make the system page pool usable as a source for allocating XDP
frames, we need to register it with xdp_reg_mem_model(), so that page
return works correctly. This is done in preparation for using the system
page_pool to convert XDP_PASS XSk frames to skbs; for the same reason,
make the per-cpu variable non-static so we can access it from other
source files as well (but w/o exporting).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-7-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In lots of places, bpf_prog pointer is used only for tracing or other
stuff that doesn't modify the structure itself. Same for net_device.
Address at least some of them and add `const` attributes there. The
object code didn't change, but that may prevent unwanted data
modifications and also allow more helpers to have const arguments.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
|
|
Guenter reported boot stalls on a emulated ARM 32-bit platform, which has a
24-bit wide clocksource.
It turns out that the calculated maximal idle time, which limits idle
sleeps to prevent clocksource wrap arounds, is close to the point where the
negative motion detection triggers.
max_idle_ns: 597268854 ns
negative motion tripping point: 671088640 ns
If the idle wakeup is delayed beyond that point, the clocksource
advances far enough to trigger the negative motion detection. This
prevents the clock to advance and in the worst case the system stalls
completely if the consecutive sleeps based on the stale clock are
delayed as well.
Cure this by calculating a more robust cut-off value for negative motion,
which covers 87.5% of the actual clocksource counter width. Compare the
delta against this value to catch negative motion. This is specifically for
clock sources with a small counter width as their wrap around time is close
to the half counter width. For clock sources with wide counters this is not
a problem because the maximum idle time is far from the half counter width
due to the math overflow protection constraints.
For the case at hand this results in a tripping point of 1174405120ns.
Note, that this cannot prevent issues when the delay exceeds the 87.5%
margin, but that's not different from the previous unchecked version which
allowed arbitrary time jumps.
Systems with small counter width are prone to invalid results, but this
problem is unlikely to be seen on real hardware. If such a system
completely stalls for more than half a second, then there are other more
urgent problems than the counter wrapping around.
Fixes: c163e40af9b2 ("timekeeping: Always check for negative motion")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8734j5ul4x.ffs@tglx
Closes: https://lore.kernel.org/all/387b120b-d68a-45e8-b6ab-768cd95d11c2@roeck-us.net
|
|
SkyHigh S35ML01G300, S35ML01G301, S35ML02G300, and S35ML04G300 are 1Gb,
2Gb, and 4Gb SLC SPI NAND flash family. This family of devices has
on-die ECC which parity bits are stored to hidden area. In this family
the on-die ECC cannot be disabled so raw access needs to be prevented.
Link: https://www.skyhighmemory.com/download/SPI_S35ML01_04G3_002_19205.pdf?v=P
Co-developed-by: KR Kim <kr.kim@skyhighmemory.com>
Signed-off-by: KR Kim <kr.kim@skyhighmemory.com>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
SkyHigh spinand device has ECC enable bit in configuration register but
it must be always enabled. If ECC is disabled, read and write ops
results in undetermined state. For such devices, a way to avoid raw
access is needed.
Introduce SPINAND_NO_RAW_ACCESS flag to advertise the device does not
support raw access. In such devices, the on-die ECC engine ops returns
error to I/O request in raw mode.
Checking and marking BBM need to be cared as special case, by adding
fallback mechanism that tries read/write OOB with ECC enabled.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
This adds the capability bit and the vport element fields related to
cross-esw scheduling.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241204220931.254964-5-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce new scheduling elements in the E-Switch QoS hierarchy to
enhance traffic management capabilities. This patch adds support for:
- Rate Limit scheduling elements: Enables bandwidth limitation across
multiple nodes without a shared ancestor, providing a mechanism for
more granular control of bandwidth allocation.
- Traffic Class Transmit Scheduling Arbiter (TSAR): Introduces the
infrastructure for creating Traffic Class TSARs, allowing
hierarchical arbitration based on traffic classes.
- Traffic Class Arbiter TSAR: Adds support for a TSAR capable of
managing arbitration between multiple traffic classes, enabling
improved bandwidth prioritization and traffic management.
No functional changes are introduced in this patch.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241204220931.254964-4-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In preparation for ConnectX-8 SWS support, add enum for the new device
type.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241204220931.254964-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The nested union at the end is not in the same style as the rest of the
code, so un-nest it to make the style uniformly applied again.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241204220931.254964-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Different core device types such as PFs and VFs shouldn't be affiliated
together since they have different capabilities, fix that by enforcing
type check before doing the affiliation.
Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/88699500f690dff1c1852c1ddb71f8a1cc8b956e.1733233480.git.leonro@nvidia.com
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add a pcs_inband_caps() method to query the PCS for its inband link
capabilities, and use this to determine whether link modes used with
optical SFPs can be supported.
When a PCS does not provide a method, we allow inband negotiation to
be either on or off, making this a no-op until the pcs_inband_caps()
method is implemented by a PCS driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUs4-006IUU-7K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a method to configure the PHY's in-band mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUru-006IUI-08@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a method to query the PHY's in-band capabilities for a PHY
interface mode.
Where the interface mode does not have in-band capability, or the PHY
driver has not been updated to return this information, then
phy_inband_caps() should return zero. Otherwise, PHY drivers will
return a value consisting of the following flags:
LINK_INBAND_DISABLE indicates that the hardware does not support
in-band signalling, or can have in-band signalling configured via
software to be disabled.
LINK_INBAND_ENABLE indicates that the hardware will use in-band
signalling, or can have in-band signalling configured via software
to be enabled.
LINK_INBAND_BYPASS indicates that the hardware has the ability to
bypass in-band signalling when enabled after a timeout if the link
partner does not respond to its in-band signalling.
This reports the PHY capabilities for the particular interface mode,
not the current configuration.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUre-006ITz-KF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netpoll_send_udp can return if send was successful.
It will allow client code to be aware of the send status.
Possible return values are the result of __netpoll_send_skb (cast to int)
and -ENOMEM. This doesn't cover the case when TX was not successful
instantaneously and was scheduled for later, __netpoll__send_skb returns
success in that case.
Signed-off-by: Maksym Kutsevol <max@kutsevol.com>
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-1-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve naming consistency with the .sdev_prep() and .sdev_destroy()
methods by renaming .device_configure() into .sdev_configure().
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace the (secctx,seclen) pointer pair with a single lsm_context
pointer to allow return of the LSM identifier along with the context
and context length. This allows security_release_secctx() to know how
to release the context. Callers have been modified to use or save the
returned data from the new structure.
Cc: ceph-devel@vger.kernel.org
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change the security_inode_getsecctx() interface to fill a lsm_context
structure instead of data and length pointers. This provides
the information about which LSM created the context so that
security_release_secctx() can use the correct hook.
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace the (secctx,seclen) pointer pair with a single
lsm_context pointer to allow return of the LSM identifier
along with the context and context length. This allows
security_release_secctx() to know how to release the
context. Callers have been modified to use or save the
returned data from the new structure.
security_secid_to_secctx() and security_lsmproc_to_secctx()
will now return the length value on success instead of 0.
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak, kdoc fix, signedness fix from Dan Carpenter]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Teach the verifier about IRQ-disabled sections through the introduction
of two new kfuncs, bpf_local_irq_save, to save IRQ state and disable
them, and bpf_local_irq_restore, to restore IRQ state and enable them
back again.
For the purposes of tracking the saved IRQ state, the verifier is taught
about a new special object on the stack of type STACK_IRQ_FLAG. This is
a 8 byte value which saves the IRQ flags which are to be passed back to
the IRQ restore kfunc.
Renumber the enums for REF_TYPE_* to simplify the check in
find_lock_state, filtering out non-lock types as they grow will become
cumbersome and is unecessary.
To track a dynamic number of IRQ-disabled regions and their associated
saved states, a new resource type RES_TYPE_IRQ is introduced, which its
state management functions: acquire_irq_state and release_irq_state,
taking advantage of the refactoring and clean ups made in earlier
commits.
One notable requirement of the kernel's IRQ save and restore API is that
they cannot happen out of order. For this purpose, when releasing reference
we keep track of the prev_id we saw with REF_TYPE_IRQ. Since reference
states are inserted in increasing order of the index, this is used to
remember the ordering of acquisitions of IRQ saved states, so that we
maintain a logical stack in acquisition order of resource identities,
and can enforce LIFO ordering when restoring IRQ state. The top of the
stack is maintained using bpf_verifier_state's active_irq_id.
To maintain the stack property when releasing reference states, we need
to modify release_reference_state to instead shift the remaining array
left using memmove instead of swapping deleted element with last that
might break the ordering. A selftest to test this subtle behavior is
added in late patches.
The logic to detect initialized and unitialized irq flag slots, marking
and unmarking is similar to how it's done for iterators. No additional
checks are needed in refsafe for REF_TYPE_IRQ, apart from the usual
check_id satisfiability check on the ref[i].id. We have to perform the
same check_ids check on state->active_irq_id as well.
To ensure we don't get assigned REF_TYPE_PTR by default after
acquire_reference_state, if someone forgets to assign the type, let's
also renumber the enum ref_state_type. This way any unassigned types
get caught by refsafe's default switch statement, don't assume
REF_TYPE_PTR by default.
The kfuncs themselves are plain wrappers over local_irq_save and
local_irq_restore macros.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204030400.208005-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, state for RCU read locks and preemption is in
bpf_verifier_state, while locks and pointer reference state remains in
bpf_func_state. There is no particular reason to keep the latter in
bpf_func_state. Additionally, it is copied into a new frame's state and
copied back to the caller frame's state everytime the verifier processes
a pseudo call instruction. This is a bit wasteful, given this state is
global for a given verification state / path.
Move all resource and reference related state in bpf_verifier_state
structure in this patch, in preparation for introducing new reference
state types in the future.
Since we switch print_verifier_state and friends to print using vstate,
we now need to explicitly pass in the verifier state from the caller
along with the bpf_func_state, so modify the prototype and callers to do
so. To ensure func state matches the verifier state when we're printing
data, take in frame number instead of bpf_func_state pointer instead and
avoid inconsistencies induced by the caller.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204030400.208005-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new lsm_context data structure to hold all the information about a
"security context", including the string, its size and which LSM allocated
the string. The allocation information is necessary because LSMs have
different policies regarding the lifecycle of these strings. SELinux
allocates and destroys them on each use, whereas Smack provides a pointer
to an entry in a list that never goes away.
Update security_release_secctx() to use the lsm_context instead of a
(char *, len) pair. Change its callers to do likewise. The LSMs
supporting this hook have had comments added to remind the developer
that there is more work to be done.
The BPF security module provides all LSM hooks. While there has yet to
be a known instance of a BPF configuration that uses security contexts,
the possibility is real. In the existing implementation there is
potential for multiple frees in that case.
Cc: linux-integrity@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
To: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: linux-nfs@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
parport_serial driver uses subset of WCH IDs that are present in 8250_pci.
Share them via pci_ids.h and switch parport_serial to use defined constants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241204031114.1029882-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The meaning of this value is already used in several places,
but with constant values and comments to explain it separately.
It's better to have a central place to do this then use the macro
in those places for better readability.
Signed-off-by: Dingyan Li <18500469033@163.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241030083858.46907-1-18500469033@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wakes up
When a device is inserted into the USB port and an S4 wakeup is initiated,
after the USB-hub initialization is completed, it will automatically enter
suspend mode. Upon detecting a device on the USB port, it will proceed with
resume and set the hcd to the HCD_FLAG_WAKEUP_PENDING state. During the S4
wakeup process, peripherals are put into suspend mode, followed by task
recovery. However, upon detecting that the hcd is in the
HCD_FLAG_WAKEUP_PENDING state, it will return an EBUSY status, causing the
S4 suspend to fail and subsequent task recovery to not proceed.
-
[ 27.594598][ 1] PM: pci_pm_freeze(): hcd_pci_suspend+0x0/0x28 returns -16
[ 27.594601][ 1] PM: dpm_run_callback(): pci_pm_freeze+0x0/0x100 returns -16
[ 27.603420][ 1] ehci-pci 0000:00:04.1: pci_pm_freeze+0x0/0x100 returned 0 after 3 usecs
[ 27.612233][ 1] ehci-pci 0000:00:05.1: pci_pm_freeze+0x0/0x100 returned -16 after 17223 usecs
[ 27.810067][ 1] PM: Device 0000:00:05.1 failed to quiesce async: error -16
[ 27.816988][ 1] PM: quiesce of devices aborted after 1833.282 msecs
[ 27.823302][ 1] PM: start quiesce of devices aborted after 1839.975 msecs
......
[ 31.303172][ 1] PM: recover of devices complete after 3473.039 msecs
[ 31.309818][ 1] PM: Failed to load hibernation image, recovering.
[ 31.348188][ 1] PM: Basic memory bitmaps freed
[ 31.352686][ 1] OOM killer enabled.
[ 31.356232][ 1] Restarting tasks ... done.
[ 31.360609][ 1] PM: resume from hibernation failed (0)
[ 31.365800][ 1] PM: Hibernation image not present or could not be loaded.
The "do_wakeup" is determined based on whether the controller's
power/wakeup attribute is set. The current issue necessitates considering
the type of suspend that is occurring. If the suspend type is either
PM_EVENT_FREEZE or PM_EVENT_QUIESCE, then "do_wakeup" should be set to
false.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410151722.rfjtknRz-lkp@intel.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Duan Chenghao <duanchenghao@kylinos.cn>
Link: https://lore.kernel.org/r/20241024024038.26157-1-duanchenghao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The get_dma_ops and set_dma_ops APIs were never for driver to use. Remove
these calls from QDMA driver. Instead, pass the DMA device pointer from the
qdma_platdata structure.
Fixes: 73d5fc92a11c ("dmaengine: amd: qdma: Add AMD QDMA driver")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240918181022.2155715-1-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The comment block for "Interleaved Transfer Request" should not begin
with "/**" since it is not in kernel-doc format.
Fix doc name for enum sum_check_flags.
Fix all (4) missing struct member warnings.
Use "Warning:" for one "Note:" in enum dma_desc_metadata_mode since
scripts/kernel-doc does not allow more than one Note:
per function or identifier description.
This leaves around 49 kernel-doc warnings like:
include/linux/dmaengine.h:43: warning: Enum value 'DMA_OUT_OF_ORDER' not described in enum 'dma_status'
and another scripts/kernel-doc problem with it not being able to parse
some typedefs.
Fixes: b14dab792dee ("DMAEngine: Define interleaved transfer request api")
Fixes: ad283ea4a3ce ("async_tx: add sum check flags")
Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE")
Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation")
Fixes: d38a8c622a1b ("dmaengine: prepare for generic 'unmap' data")
Fixes: 5878853fc938 ("dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Nuno Sa <nuno.sa@analog.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20241202172004.76020-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently, ffa_dev->properties is set after the ffa_device_register()
call return in ffa_setup_partitions(). This could potentially result in
a race where the partition's properties is accessed while probing
struct ffa_device before it is set.
Update the ffa_device_register() to receive ffa_partition_info so all
the data from the partition information received from the firmware can
be updated into the struct ffa_device before the calling device_register()
in ffa_device_register().
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the type of the res2 parameter in io_uring_cmd_done from ssize_t
to u64. This aligns the parameter type with io_req_set_cqe32_extra,
which expects u64 arguments.
The change eliminates potential issues on 32-bit architectures where
ssize_t might be 32-bit.
Only user of passing res2 is drivers/nvme/host/ioctl.c and it actually
passes u64.
Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd")
Cc: stable@vger.kernel.org
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Tested-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Link: https://lore.kernel.org/r/20241203-io_uring_cmd_done-res2-as-u64-v2-1-5e59ae617151@ddn.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The housekeeping cpumasks are only set by two boot commandline
parameters: "nohz_full" and "isolcpus". When there is more than one of
"nohz_full" or "isolcpus", the extra ones must have the same CPU list
or the setup will fail partially.
The HK_TYPE_DOMAIN and HK_TYPE_MANAGED_IRQ types are settable by
"isolcpus" only and their settings can be independent of the other
types. The other housekeeping types are all set by "nohz_full" or
"isolcpus=nohz" without a way to set them individually. So they all
have identical cpumasks.
There is actually no point in having different cpumasks for these
"nohz_full" only housekeeping types. Consolidate these types to use the
same cpumask by aliasing them to the same value. If there is a need to
set any of them independently in the future, we can break them out to
their own cpumasks again.
With this change, the number of cpumasks in the housekeeping structure
drops from 9 to 3. Other than that, there should be no other functional
change.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20241030175253.125248-4-longman@redhat.com
|
|
The HK_TYPE_SCHED housekeeping type is defined but not set anywhere. So
any code that try to use HK_TYPE_SCHED are essentially dead code. So
remove HK_TYPE_SCHED and any code that use it.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20241030175253.125248-2-longman@redhat.com
|
|
The below commit introduces a dummy lockdep map, but didn't get
the initialization quite right (it should mimic the initialization
of the real ww_mutex lockdep maps). It also introduced a separate
locking api selftest failure. Fix these.
Closes: https://lore.kernel.org/lkml/Zw19sMtnKdyOVQoh@boqun-archlinux/
Fixes: 823a566221a5 ("locking/ww_mutex: Adjust to lockdep nest_lock requirements")
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241127085430.3045-1-thomas.hellstrom@linux.intel.com
|
|
Currently REACHABLE is weird for being on the instruction after the
instruction it modifies.
Since all REACHABLE annotations have an explicit instruction, flip
them around.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20241128094312.494176035@infradead.org
|
