| Age | Commit message (Collapse) | Author |
|---|
|
git://git.infradead.org/users/hch/dma-mapping into master
Pull dma-mapping fixes from Christoph Hellwig:
"Ensure we always have fully addressable memory in the dma coherent
pool (Nicolas Saenz Julienne)"
* tag 'dma-mapping-5.8-6' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: do not allocate pool memory from CMA
dma-pool: make sure atomic pool suits device
dma-pool: introduce dma_guess_pool()
dma-pool: get rid of dma_in_atomic_pool()
dma-direct: provide function to check physical memory area validity
|
|
This patch introduces CAP_CHECKPOINT_RESTORE, a new capability facilitating
checkpoint/restore for non-root users.
Over the last years, The CRIU (Checkpoint/Restore In Userspace) team has
been asked numerous times if it is possible to checkpoint/restore a
process as non-root. The answer usually was: 'almost'.
The main blocker to restore a process as non-root was to control the PID
of the restored process. This feature available via the clone3 system
call, or via /proc/sys/kernel/ns_last_pid is unfortunately guarded by
CAP_SYS_ADMIN.
In the past two years, requests for non-root checkpoint/restore have
increased due to the following use cases:
* Checkpoint/Restore in an HPC environment in combination with a
resource manager distributing jobs where users are always running as
non-root. There is a desire to provide a way to checkpoint and
restore long running jobs.
* Container migration as non-root
* We have been in contact with JVM developers who are integrating
CRIU into a Java VM to decrease the startup time. These
checkpoint/restore applications are not meant to be running with
CAP_SYS_ADMIN.
We have seen the following workarounds:
* Use a setuid wrapper around CRIU:
See https://github.com/FredHutch/slurm-examples/blob/master/checkpointer/lib/checkpointer/checkpointer-suid.c
* Use a setuid helper that writes to ns_last_pid.
Unfortunately, this helper delegation technique is impossible to use
with clone3, and is thus prone to races.
See https://github.com/twosigma/set_ns_last_pid
* Cycle through PIDs with fork() until the desired PID is reached:
This has been demonstrated to work with cycling rates of 100,000 PIDs/s
See https://github.com/twosigma/set_ns_last_pid
* Patch out the CAP_SYS_ADMIN check from the kernel
* Run the desired application in a new user and PID namespace to provide
a local CAP_SYS_ADMIN for controlling PIDs. This technique has limited
use in typical container environments (e.g., Kubernetes) as /proc is
typically protected with read-only layers (e.g., /proc/sys) for
hardening purposes. Read-only layers prevent additional /proc mounts
(due to proc's SB_I_USERNS_VISIBLE property), making the use of new
PID namespaces limited as certain applications need access to /proc
matching their PID namespace.
The introduced capability allows to:
* Control PIDs when the current user is CAP_CHECKPOINT_RESTORE capable
for the corresponding PID namespace via ns_last_pid/clone3.
* Open files in /proc/pid/map_files when the current user is
CAP_CHECKPOINT_RESTORE capable in the root namespace, useful for
recovering files that are unreachable via the file system such as
deleted files, or memfd files.
See corresponding selftest for an example with clone3().
Signed-off-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Nicolas Viennot <Nicolas.Viennot@twosigma.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200719100418.2112740-2-areber@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Drivers may need to test if a fwnode is a graph endpoint. To avoid
hand-written solutions that wouldn't work for all fwnode types, add a
new fwnode_graph_is_endpoint() function for this purpose. We don't need
to wire it up to different backends for OF and ACPI for now, as the
implementation can simply be based on checkout the presence of a
remote-endpoint property.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Several IOMMU drivers have a bypass mode where they can use a direct
mapping if the devices DMA mask is large enough. Add generic support
to the core dma-mapping code to do that to switch those drivers to
a common solution.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
Drop the doubled word "has" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/06e64046-ebf1-15db-dbaf-73698de3b493@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Following ipv4 stack changes, run a BPF program attached to netns before
looking up a listening socket. Program can return a listening socket to use
as result of socket lookup, fail the lookup, or take no action.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-7-jakub@cloudflare.com
|
|
Run a BPF program before looking up a listening socket on the receive path.
Program selects a listening socket to yield as result of socket lookup by
calling bpf_sk_assign() helper and returning SK_PASS code. Program can
revert its decision by assigning a NULL socket with bpf_sk_assign().
Alternatively, BPF program can also fail the lookup by returning with
SK_DROP, or let the lookup continue as usual with SK_PASS on return, when
no socket has been selected with bpf_sk_assign().
This lets the user match packets with listening sockets freely at the last
possible point on the receive path, where we know that packets are destined
for local delivery after undergoing policing, filtering, and routing.
With BPF code selecting the socket, directing packets destined to an IP
range or to a port range to a single socket becomes possible.
In case multiple programs are attached, they are run in series in the order
in which they were attached. The end result is determined from return codes
of all the programs according to following rules:
1. If any program returned SK_PASS and selected a valid socket, the socket
is used as result of socket lookup.
2. If more than one program returned SK_PASS and selected a socket,
last selection takes effect.
3. If any program returned SK_DROP, and no program returned SK_PASS and
selected a socket, socket lookup fails with -ECONNREFUSED.
4. If all programs returned SK_PASS and none of them selected a socket,
socket lookup continues to htable-based lookup.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-5-jakub@cloudflare.com
|
|
Add a new program type BPF_PROG_TYPE_SK_LOOKUP with a dedicated attach type
BPF_SK_LOOKUP. The new program kind is to be invoked by the transport layer
when looking up a listening socket for a new connection request for
connection oriented protocols, or when looking up an unconnected socket for
a packet for connection-less protocols.
When called, SK_LOOKUP BPF program can select a socket that will receive
the packet. This serves as a mechanism to overcome the limits of what
bind() API allows to express. Two use-cases driving this work are:
(1) steer packets destined to an IP range, on fixed port to a socket
192.0.2.0/24, port 80 -> NGINX socket
(2) steer packets destined to an IP address, on any port to a socket
198.51.100.1, any port -> L7 proxy socket
In its run-time context program receives information about the packet that
triggered the socket lookup. Namely IP version, L4 protocol identifier, and
address 4-tuple. Context can be further extended to include ingress
interface identifier.
To select a socket BPF program fetches it from a map holding socket
references, like SOCKMAP or SOCKHASH, and calls bpf_sk_assign(ctx, sk, ...)
helper to record the selection. Transport layer then uses the selected
socket as a result of socket lookup.
In its basic form, SK_LOOKUP acts as a filter and hence must return either
SK_PASS or SK_DROP. If the program returns with SK_PASS, transport should
look for a socket to receive the packet, or use the one selected by the
program if available, while SK_DROP informs the transport layer that the
lookup should fail.
This patch only enables the user to attach an SK_LOOKUP program to a
network namespace. Subsequent patches hook it up to run on local delivery
path in ipv4 and ipv6 stacks.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-3-jakub@cloudflare.com
|
|
Extend the BPF netns link callbacks to rebuild (grow/shrink) or update the
prog_array at given position when link gets attached/updated/released.
This let's us lift the limit of having just one link attached for the new
attach type introduced by subsequent patch.
No functional changes intended.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-2-jakub@cloudflare.com
|
|
In order to improve consistency and usability in cgroup stat accounting,
we would like to support the root cgroup's io.stat.
Since the root cgroup has processes doing io even if the system has no
explicitly created cgroups, we need to be careful to avoid overhead in
that case. For that reason, the rstat algorithms don't handle the root
cgroup, so just turning the file on wouldn't give correct statistics.
To get around this, we simulate flushing the iostat struct by filling it
out directly from global disk stats. The result is a root cgroup io.stat
file consistent with both /proc/diskstats and io.stat.
Note that in order to collect the disk stats, we needed to iterate over
devices. To facilitate that, we had to change the linkage of a disk_type
to external so that it can be used from blk-cgroup.c to iterate over
disks.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Boris Burkov <boris@bur.io>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drop the doubled word "be" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make function rproc_resource_cleanup() public so that it can be
used by platform drivers when allocating resources to be used by
a detached remote processor.
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200714200445.1427257-8-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-07-16
Fixes:
1) Fix build break when CONFIG_XPS is not set
2) Fix missing switch_id for representors
Updates:
1) IPsec XFRM RX offloads from Raed and Huy.
- Added IPSec RX steering flow tables to NIC RX
- Refactoring of the existing FPGA IPSec, to add support
for ConnectX IPsec.
- RX data path handling for IPSec traffic
- Synchronize offloading device ESN with xfrm received SN
2) Parav allows E-Switch to siwtch to switchdev mode directly without
the need to go through legacy mode first.
3) From Tariq, Misc updates including:
3.1) indirect calls for RX and XDP handlers
3.2) Make MLX5_EN_TLS non-prompt as it should always be enabled when
TLS and MLX5_EN are selected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function can be reused by other usbnet minidrivers.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This makes the function available to other drivers, like cdc_ncm.
Signed-off-by: Miguel Rodríguez Pérez <miguel@det.uvigo.gal>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse into master
Pull fuse fixes from Miklos Szeredi:
- two regressions in this cycle caused by the conversion of writepage
list to an rb_tree
- two regressions in v5.4 cause by the conversion to the new mount API
- saner behavior of fsconfig(2) for the reconfigure case
- an ancient issue with FS_IOC_{GET,SET}FLAGS ioctls
* tag 'fuse-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS
fuse: don't ignore errors from fuse_writepages_fill()
fuse: clean up condition for writepage sending
fuse: reject options on reconfigure via fsconfig(2)
fuse: ignore 'data' argument of mount(..., MS_REMOUNT)
fuse: use ->reconfigure() instead of ->remount_fs()
fuse: fix warning in tree_insert() and clean up writepage insertion
fuse: move rb_erase() before tree_insert()
|
|
commit 0688e64bc600 ("NFS: Allow signal interruption of NFS4ERR_DELAYed operations")
introduces nfs4_delay_interruptible which also needs an _unsafe version to
avoid the following call trace for the same reason explained in
commit 416ad3c9c006 ("freezer: add unsafe versions of freezable helpers for NFS")
CPU: 4 PID: 3968 Comm: rm Tainted: G W 5.8.0-rc4 #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
dump_backtrace+0x0/0x1dc
show_stack+0x20/0x30
dump_stack+0xdc/0x150
debug_check_no_locks_held+0x98/0xa0
nfs4_delay_interruptible+0xd8/0x120
nfs4_handle_exception+0x130/0x170
nfs4_proc_rmdir+0x8c/0x220
nfs_rmdir+0xa4/0x360
vfs_rmdir.part.0+0x6c/0x1b0
do_rmdir+0x18c/0x210
__arm64_sys_unlinkat+0x64/0x7c
el0_svc_common.constprop.0+0x7c/0x110
do_el0_svc+0x24/0xa0
el0_sync_handler+0x13c/0x1b8
el0_sync+0x158/0x180
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
SW can trigger MIPI pads calibration any time after power on
but calibration results will be latched and applied to the pads
by MIPI CAL unit only when the link is in LP-11 state and then
status register will be updated.
For CSI, trigger of pads calibration happen during CSI stream
enable where CSI receiver is kept ready prior to sensor or CSI
transmitter stream start.
So, pads may not be in LP-11 at this time and waiting for the
calibration to be done immediate after calibration start will
result in timeout.
This patch splits tegra_mipi_calibrate() and tegra_mipi_wait()
so triggering for calibration and waiting for it to complete can
happen at different stages.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra CSI driver need a separate MIPI device for each channel as
calibration of corresponding MIPI pads for each channel should
happen independently.
So, this patch updates tegra_mipi_request() API to add a device_node
pointer argument to allow creating mipi device for specific device
node rather than a device.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Currently REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL are defined as
even numbers 6 and 8, such zone reset bios are treated as READ bios by
bio_data_dir(), which is obviously misleading.
The macro bio_data_dir() is defined in include/linux/bio.h as,
55 #define bio_data_dir(bio) \
56 (op_is_write(bio_op(bio)) ? WRITE : READ)
And op_is_write() is defined in include/linux/blk_types.h as,
397 static inline bool op_is_write(unsigned int op)
398 {
399 return (op & 1);
400 }
The convention of op_is_write() is when there is data transfer then the
op code should be odd number, and treat as a write op. bio_data_dir()
treats all bio direction as READ if op_is_write() reports false, and
WRITE if op_is_write() reports true.
Because REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL are even numbers,
although they don't transfer data but reporting them as READ bio by
bio_data_dir() is misleading and might be wrong. Because these two
commands will reset the writer pointers of the resetting zones, and all
content after the reset write pointer will be invalid and unaccessible,
obviously they are not READ bios in any means.
This patch changes REQ_OP_ZONE_RESET from 6 to 15, and changes
REQ_OP_ZONE_RESET_ALL from 8 to 17. Now bios with these two op code
can be treated as WRITE by bio_data_dir(). Although they don't transfer
data, now we keep them consistent with REQ_OP_DISCARD and
REQ_OP_WRITE_ZEROES with the ituition that they change on-media content
and should be WRITE request.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, cleanups and features for IIO in the 5.9 cycle
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: buffer: fix attach/detach pollfunc order
iio: core: remove iio_priv_to_dev() helper
Replace HTTP links with HTTPS ones: drivers/iio
Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
iio: cros_ec_accel_legacy: Add Read Only frequency entries
MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer
iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions
iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc()
iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h
iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections.
iio:adc:ti-adc161s626: Drop of_match_ptr protection.
iio:adc:ti-adc084s021: drop of_match_ptr protection
iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections
iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h
iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes
iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections
iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections
iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections
iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include
...
|
|
DMA engines used with displays perform 2D interleaved transfers to read
framebuffers from memory and feed the data to the display engine. As the
same framebuffer can be displayed for multiple frames, the DMA
transactions need to be repeated until a new framebuffer replaces the
current one. This feature is implemented natively by some DMA engines
that have the ability to repeat transactions and switch to a new
transaction at the end of a transfer without any race condition or frame
loss.
This patch implements support for this feature in the DMA engine API. A
new DMA_PREP_REPEAT transaction flag allows DMA clients to instruct the
DMA channel to repeat the transaction automatically until one or more
new transactions are issued on the channel (or until all active DMA
transfers are explicitly terminated with the dmaengine_terminate_*()
functions). A new DMA_REPEAT transaction type is also added for DMA
engine drivers to report their support of the DMA_PREP_REPEAT flag.
A new DMA_PREP_LOAD_EOT transaction flag is also introduced (with a
corresponding DMA_LOAD_EOT capability bit), as requested during the
review of v4. The flag instructs the DMA channel that the transaction
being queued should replace the active repeated transaction when the
latter terminates (at End Of Transaction). Not setting the flag will
result in the active repeated transaction to continue being repeated,
and the new transaction being silently ignored.
The DMA_PREP_REPEAT flag is currently supported for interleaved
transactions only. Its usage can easily be extended to cover more
transaction types simply by adding an appropriate check in the
corresponding dmaengine_prep_*() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200717013337.24122-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This patch prevents the firmware image name from being displayed when
the remoteproc core is attaching to a remote processor. This is needed
needed since there is no guarantee about the nature of the firmware
image that is loaded by the external entity.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20200714195035.1426873-10-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add an new attach() operation in order to properly deal with
scenarios where the remoteproc core needs to attach to a
remote processor that has been booted by another entity.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20200714195035.1426873-3-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add a new RPROC_DETACHED state to take into account scenarios
where the remoteproc core needs to attach to a remote processor
that is booted by another entity.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20200714195035.1426873-2-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
into master
Pull drm fixes from Dave Airlie:
"Weekly fixes pull, big bigger than I'd normally like, but they are
fairly scattered and small individually.
The vmwgfx one is a black screen regression, otherwise the largest is
an MST encoder fix for amdgpu which results in a WARN in some cases,
and a scattering of i915 fixes.
I'm tracking two regressions at the moment that hopefully we get
nailed down this week for rc7.
dma-buf:
- sleeping atomic fix
amdgpu:
- Fix a race condition with KIQ
- Preemption fix
- Fix handling of fake MST encoders
- OLED panel fix
- Handle allocation failure in stream construction
- Renoir SMC fix
- SDMA 5.x fix
i915:
- FBC w/a stride fix
- Fix use-after-free fix on module reload
- Ignore irq enabling on the virtual engines to fix device sleep
- Use GTT when saving/restoring engine GPR
- Fix selftest sort function
vmwgfx:
- black screen fix
aspeed:
- fbcon init warn fix"
* tag 'drm-fixes-2020-07-17-1' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr()
drm/amdgpu/powerplay: Modify SMC message name for setting power profile mode
drm/amd/display: handle failed allocation during stream construction
drm/amd/display: OLED panel backlight adjust not work with external display connected
drm/amdgpu/display: create fake mst encoders ahead of time (v4)
drm/amdgpu: fix preemption unit test
drm/amdgpu/gfx10: fix race condition for kiq
drm/i915: Recalculate FBC w/a stride when needed
drm/i915: Move cec_notifier to intel_hdmi_connector_unregister, v2.
drm/i915/gt: Only swap to a random sibling once upon creation
drm/i915/gt: Ignore irq enabling on the virtual engines
drm/i915/perf: Use GTT when saving/restoring engine GPR
drm/i915/selftests: Fix compare functions provided for sorting
drm/vmwgfx: fix update of display surface when resolution changes
dmabuf: use spinlock to access dmabuf->name
drm/aspeed: Call drm_fbdev_generic_setup after drm_dev_register
|
|
|
|
Change doubled word "as" to "as a".
Change "Return: Return:" in kernel-doc notation to have only one
"Return:".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Link: https://lore.kernel.org/r/40354d64-be71-3952-a980-63a76a278145@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add FTE actions IPsec ENCRYPT/DECRYPT
Add ipsec_obj_id field in FTE
Add new action field MLX5_ACTION_IN_FIELD_IPSEC_SYNDROME
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This to set the base for downstream patches to support
the new IPsec implementation of the Connect-X family.
Following modifications made:
- Remove accel layer dependency from MLX5_FPGA_IPSEC.
- Introduce accel_ipsec_ops, each IPsec device will
have to support these ops.
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Silence documentation build warning by correcting kernel-doc comments.
./include/linux/regulator/machine.h:196: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints'
./include/linux/regulator/driver.h:206: warning: Function parameter or member 'resume' not described in 'regulator_ops'
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Link: https://lore.kernel.org/r/20200715191438.29312-1-colton.w.lewis@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change doubled word "be" to "to be".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/7ef41bfc-de3e-073a-8746-0b3fdf7628c0@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Leading comma prevents arbitrary reordering of initialisation clauses.
The whole point of C99 initialisation is to allow any such reordering.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200711145954.GA1178171@localhost.localdomain
|
|
Currently lockdep_types.h includes list.h without actually using any
of its macros or functions. All it needs are the type definitions
which were moved into types.h long ago. This potentially causes
inclusion loops because both are included by many core header
files.
This patch moves the list.h inclusion into lockdep.h. Note that
we could probably remove it completely but that could potentially
result in compile failures should any end users not include list.h
directly and also be unlucky enough to not get list.h via some other
header file.
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200716063649.GA23065@gondor.apana.org.au
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
add new functions to cmdq helper functions
- assign value to register
- export finalize function and don't call explicitely from flush async
- set specific event
* tag 'v5.8-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: cmdq: add set event function
soc: mediatek: cmdq: export finalize function
soc: mediatek: cmdq: add assign function
Link: https://lore.kernel.org/r/01399fb4-b2d0-e41b-dfd9-f2deba0ef651@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
As recommended[2] by[3] Linus[4], remove the macro. With the recent
change to disable -Wmaybe-uninitialized in v5.7 in commit 78a5255ffb6a
("Stop the ad-hoc games with -Wno-maybe-initialized"), this is likely
the best time to make this treewide change.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings (e.g.
"unused variable"). If the compiler thinks it is uninitialized, either
simply initialize the variable or make compiler changes. As a precursor
to removing[2] this[3] macro[4], refactor code to avoid its need.
The original reason for its use here was to work around the #ifdef
being the only place the variable was used. This is better expressed
using IS_ENABLED() and a new code block where the variable can be used
unconditionally.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Fixes: 1e01979c8f50 ("x86, numa: Implement pfn -> nid mapping granularity check")
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master
Pull driver core fixes from Greg KH:
"Here are 3 driver core fixes for 5.8-rc6.
They resolve some issues found with the deferred probe code for some
types of devices on some embedded systems. They have been tested a
bunch and have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Avoid deferred probe due to fw_devlink_pause/resume()
driver core: Rename dev_links_info.defer_sync to defer_hook
driver core: Don't do deferred probe in parallel with kernel_init thread
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into master
Pull tty/serial driver fixes from Greg KH:
:Here are some small tty and serial driver fixes for 5.8-rc6.
The largest set of patches in here is a revert of the sysrq changes
that went into 5.8-rc1 but turned out to cause a noticable overhead
and cpu usage.
Other than that, there's a few small serial driver fixes to resolve
reported issues, and finally resolving the spinlock init problem on
many serial driver consoles.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Initialise spin lock before use in uart_configure_port()
serial: mxs-auart: add missed iounmap() in probe failure and remove
serial: sh-sci: Initialize spinlock for uart console
Revert "tty: xilinx_uartps: Fix missing id assignment to the console"
serial: core: drop redundant sysrq checks
serial: core: fix sysrq overhead regression
Revert "serial: core: Refactor uart_unlock_and_check_sysrq()"
tty/serial: fix serial_core.c kernel-doc warnings
tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
|
|
The arcane magic in bd_start_claiming is only needed to be able to claim
a block_device that hasn't been fully set up. Switch the loop driver
that claims from the ioctl path with a fully set up struct block_device
to just use the much simpler bd_prepare_to_claim directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the capability to attach an eBPF program to cpumap entries.
The idea behind this feature is to add the possibility to define on
which CPU run the eBPF program if the underlying hw does not support
RSS. Current supported verdicts are XDP_DROP and XDP_PASS.
This patch has been tested on Marvell ESPRESSObin using xdp_redirect_cpu
sample available in the kernel tree to identify possible performance
regressions. Results show there are no observable differences in
packet-per-second:
$./xdp_redirect_cpu --progname xdp_cpu_map0 --dev eth0 --cpu 1
rx: 354.8 Kpps
rx: 356.0 Kpps
rx: 356.8 Kpps
rx: 356.3 Kpps
rx: 356.6 Kpps
rx: 356.6 Kpps
rx: 356.7 Kpps
rx: 355.8 Kpps
rx: 356.8 Kpps
rx: 356.8 Kpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/5c9febdf903d810b3415732e5cd98491d7d9067a.1594734381.git.lorenzo@kernel.org
|
|
Inline the single page map/unmap/sync dma-direct calls into the now
out of line generic wrappers. This restores the behavior of a single
function call that we had before moving the generic calls out of line.
Besides the dma-mapping callers there are just a few callers in IOMMU
drivers that have a bypass mode, and more of those are going to be
switched to the generic bypass soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
For a long time the DMA API has been implemented inline in dma-mapping.h,
but the function bodies can be quite large. Move them all out of line.
This also removes all the dma_direct_* exports as those are just
implementation details and should never be used by drivers directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
mdp_major can just move to drivers/md/md.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Just like the NFS and CIFS root code this better lives with the
driver it is tightly integrated with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a helper for struct file based chmode operations. To be used by
the initramfs code soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a helper for struct file based chown operations. To be used by
the initramfs code soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce a new algorithm flag CRYPTO_ALG_ALLOCATES_MEMORY. If this
flag is set, then the driver allocates memory in its request routine.
Such drivers are not suitable for disk encryption because GFP_ATOMIC
allocation can fail anytime (causing random I/O errors) and GFP_KERNEL
allocation can recurse into the block layer, causing a deadlock.
For now, this flag is only implemented for some algorithm types. We
also assume some usage constraints for it to be meaningful, since there
are lots of edge cases the crypto API allows (e.g., misaligned or
fragmented scatterlists) that mean that nearly any crypto algorithm can
allocate memory in some case. See the comment for details.
Also add this flag to CRYPTO_ALG_INHERITED_FLAGS so that when a template
is instantiated, this flag is set on the template instance if it is set
on any algorithm the instance uses.
Based on a patch by Mikulas Patocka <mpatocka@redhat.com>
(https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CRYPTO_ALG_NEED_FALLBACK is handled inconsistently. When it's requested
to be clear, some templates propagate that request to child algorithms,
while others don't.
It's apparently desired for NEED_FALLBACK to be propagated, to avoid
deadlocks where a module tries to load itself while it's being
initialized, and to avoid unnecessarily complex fallback chains where we
have e.g. cbc-aes-$driver falling back to cbc(aes-$driver) where
aes-$driver itself falls back to aes-generic, instead of cbc-aes-$driver
simply falling back to cbc(aes-generic). There have been a number of
fixes to this effect:
commit 89027579bc6c ("crypto: xts - Propagate NEED_FALLBACK bit")
commit d2c2a85cfe82 ("crypto: ctr - Propagate NEED_FALLBACK bit")
commit e6c2e65c70a6 ("crypto: cbc - Propagate NEED_FALLBACK bit")
But it seems that other templates can have the same problems too.
To avoid this whack-a-mole, just add NEED_FALLBACK to INHERITED_FLAGS so
that it's always inherited.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
