| Age | Commit message (Collapse) | Author |
|---|
|
Set limits for extended attributes (attribute value size and listxattr
buffer size), based on the fs-independent limits (XATTR_*_MAX).
Define the maximum XDR sizes for the RFC 8276 XATTR operations.
In the case of operations that carry a larger payload (SETXATTR,
GETXATTR, LISTXATTR), these exclude that payload, which is added
as separate pages, like other operations do.
Define, much like for read and write operations, the maximum overhead
sizes for get/set/listxattr, and use them to limit the maximum payload
size for those operations, in combination with the channel attributes.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Add client-side only definitions for user extended
attributes (RFC8276). These are the access bits
as used by the client code, and the CLNT procedure
number definition.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
First, refactor: Dereference the svc_rdma_send_ctxt inside
svc_rdma_send() instead of at every call site.
Then, it can be passed into trace_svcrdma_post_send() to get the
proper completion ID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Set up a completion ID in each svc_rdma_send_ctxt. The ID is used
to match an incoming Send completion to a transport and to a
previous ib_post_send().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Set up a completion ID in each svc_rdma_recv_ctxt. The ID is used
to match an incoming Receive completion to a transport and to a
previous ib_post_recv().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The goal is to replace CQE kernel memory addresses in completion-
related tracepoints.
Each completion ID matches an incoming Send or Receive completion
to a Completion Queue and to a previous ib_post_*(). The ID can
then be displayed in an error message or recorded in a trace
record.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: De-duplicate some code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: De-duplicate some code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Use these helpers in a few spots to demonstrate their use.
The remaining open-coded discriminator checks in rpcrdma will be
addressed in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pavane pour une infante défunte.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Prepare for svc_rdma_send_error_msg() to be invoked from another
source file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Implement the main entry points for the *XATTR operations.
Add functions to calculate the reply size for the user extended attribute
operations, and implement the XDR encode / decode logic for these
operations.
Add the user extended attributes operations to nfsd4_ops.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a function that checks is an extended attribute namespace is
supported for an inode, meaning that a handler must be present
for either the whole namespace, or at least one synthetic
xattr in the namespace.
To be used by the nfs server code when being queried for extended
attributes support.
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
set/removexattr on an exported filesystem should break NFS delegations.
This is true in general, but also for the upcoming support for
RFC 8726 (NFSv4 extended attribute support). Make sure that they do.
Additionally, they need to grow a _locked variant, since callers might
call this with i_rwsem held (like the NFS server code).
Cc: stable@vger.kernel.org # v4.9+
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add definitions for the new operations, errors and flags as defined
in RFC 8276 (File System Extended Attributes in NFSv4).
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Expand __receive_fd() with support for replace_fd() for the coming seccomp
"addfd" ioctl(). Add new wrapper receive_fd_replace() for the new behavior
and update existing wrappers to retain old behavior.
Thanks to Colin Ian King <colin.king@canonical.com> for pointing out an
uninitialized variable exposure in an earlier version of this patch.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Kadashev <dkadashev@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
For both pidfd and seccomp, the __user pointer is not used. Update
__receive_fd() to make writing to ufd optional via a NULL check. However,
for the receive_fd_user() wrapper, ufd is NULL checked so an -EFAULT
can be returned to avoid changing the SCM_RIGHTS interface behavior. Add
new wrapper receive_fd() for pidfd and seccomp that does not use the ufd
argument. For the new helper, the allocated fd needs to be returned on
success. Update the existing callers to handle it.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation for users of the "install a received file" logic outside
of net/ (pidfd and seccomp), relocate and rename __scm_install_fd() from
net/core/scm.c to __receive_fd() in fs/file.c, and provide a wrapper
named receive_fd_user(), as future patches will change the interface
to __receive_fd().
Additionally add a comment to fd_install() as a counterpoint to how
__receive_fd() interacts with fput().
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dmitry Kadashev <dkadashev@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: netdev@vger.kernel.org
Reviewed-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Adding support to generate .BTF_ids section that will hold BTF
ID lists for verifier.
Adding macros that will help to define lists of BTF ID values
placed in .BTF_ids section. They are initially filled with zeros
(during compilation) and resolved later during the linking phase
by resolve_btfids tool.
Following defines list of one BTF ID value:
BTF_ID_LIST(bpf_skb_output_btf_ids)
BTF_ID(struct, sk_buff)
It also defines following variable to access the list:
extern u32 bpf_skb_output_btf_ids[];
The BTF_ID_UNUSED macro defines 4 zero bytes. It's used when we
want to define 'unused' entry in BTF_ID_LIST, like:
BTF_ID_LIST(bpf_skb_output_btf_ids)
BTF_ID(struct, sk_buff)
BTF_ID_UNUSED
BTF_ID(struct, task_struct)
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-4-jolsa@kernel.org
|
|
This converts the two Freescale i.MX SPI drivers
Freescale i.MX (CONFIG_SPI_IMX) and Freescale i.MX LPSPI
(CONFIG_SPI_FSL_LPSPI) to use GPIO descriptors handled in
the SPI core for GPIO chip selects whether defined in
the device tree or a board file.
The reason why both are converted at the same time is
that they were both using the same platform data and
platform device population helpers when using
board files intertwining the code so this gives a cleaner
cut.
The platform device creation was passing a platform data
container from each boardfile down to the driver using
struct spi_imx_master from <linux/platform_data/spi-imx.h>,
but this was only conveying the number of chipselects and
an int * array of the chipselect GPIO numbers.
The imx27 and imx31 platforms had code passing the
now-unused platform data when creating the platform devices,
this has been repurposed to pass around GPIO descriptor
tables. The platform data struct that was just passing an
array of integers and number of chip selects for the GPIO
lines has been removed.
The number of chipselects used to be passed from the board
file, because this number also limits the number of native
chipselects that the platform can use. To deal with this we
just augment the i.MX (CONFIG_SPI_IMX) driver to support 3
chipselects if the platform does not define "num-cs" as a
device property (such as from the device tree). This covers
all the legacy boards as these use <= 3 native chip selects
(or GPIO lines, and in that case the number of chip selects
is determined by the core from the number of available
GPIO lines). Any new boards should use device tree, so
this is a reasonable simplification to cover all old
boards.
The LPSPI driver never assigned the number of chipselects
and thus always fall back to the core default of 1 chip
select if no GPIOs are defined in the device tree.
The Freescale i.MX driver was already partly utilizing
the SPI core to obtain the GPIO numbers from the device tree,
so this completes the transtion to let the core handle all
of it.
All board files and the core i.MX boardfile registration
code is augmented to account for these changes.
This has been compile-tested with the imx_v4_v5_defconfig
and the imx_v6_v7_defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Trent Piepho <tpiepho@impinj.com>
Cc: Clark Wang <xiaoning.wang@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Link: https://lore.kernel.org/r/20200625200252.207614-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All users of this helper have been updated to not use it.
Remove it now, so that we don't need to move it when creating the
iio_dev_opaque structure.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The commit 5a36d6bcdf23 ("mmc: core: Add DT-bindings for
MMC_CAP2_FULL_PWR_CYCLE") added the "full-pwr-cycle" property which
is possible to perform a full power cycle of the card at any time.
However, some environment (like r8a77951-salvator-xs) is possible
to perform a full power cycle of the card in suspend via firmware
(PSCI on arm-trusted-firmware). So, in worst case, since we are
not doing a graceful shutdown of the eMMC device (just cut VCCQ
while the eMMC is "sleeping") in suspend, it could lead to internal
data corruptions. So, add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND
to do a graceful shutdown which issues Power Off notification
before entering system suspend.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1594123122-13156-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When building the kernel with W=1 the build system complains of:
drivers/mmc/host/omap.c:854:6: warning: no previous prototype for ‘omap_mmc_notify_cover_event’ [-Wmissing-prototypes]
854 | void omap_mmc_notify_cover_event(struct device *dev, int num, int is_closed)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
If we move the prototype into a shared headerfile the build system
will be satisfied. Rather than create a whole new headerfile just
for this purpose, it makes sense to use the already existing
mmc-omap.h.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20200701102317.235032-1-lee.jones@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Define appropriate macro names for consistency with other macros.
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200629072144.24351-1-pali@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The approach to allow userspace ~5s to consume the uevent, which is
triggered when a new card is inserted/initialized, currently requires the
mmc host to support system wakeup.
This is unnecessary limiting, especially for an mmc host that relies on a
GPIO IRQ for card detect. More precisely, the mmc host may not support
system wakeup for its corresponding struct device, while the GPIO IRQ still
could be configured as a wakeup IRQ via enable_irq_wake().
To support all various cases, let's simply drop the need for the wakeup
support. Instead let's always register a wakeup source and activate it for
all card detect IRQs by calling __pm_wakeup_event().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200529102341.12529-1-ulf.hansson@linaro.org
|
|
Event reports are used to convey information describing events to the
registered user-callbacks: they are necessarily derived from the underlying
raw SCMI events' messages but they are not meant to expose or directly
mirror any of those messages data layout, which belong to the protocol
layer.
Using fixed size types for report fields, mirroring messages structure,
is at odd with this: get rid of them using more generic, equivalent,
typing.
Substitute scmi_event_header fixed size fields with generic types too and
shuffle around fields definitions to minimize implicit padding while
adapting involved functions.
Link: https://lore.kernel.org/r/20200710133919.39792-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Substitute zero-length array defined in scmi_base_error_report with
a flexible length array definition.
Link: https://lore.kernel.org/r/20200710133919.39792-1-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The LP55xx driver is already using the of_gpio() functions to
pick a global GPIO number for "enable" from the device tree and
request the line. Simplify it by just using a GPIO descriptor.
Make sure to keep the enable GPIO line optional, change the
naming from "lp5523_enable" to "LP55xx enable" to reflect that
this is used on all LP55xx LED drivers.
Cc: Milo Kim <milo.kim@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I have a few KGDB-related fixes. They're mostly fixes for build
warnings, but there's also:
- Support for the qSupported and qXfer packets, which are necessary
to pass around GDB XML information which we need for the RISC-V GDB
port to fully function.
- Users can now select STRICT_KERNEL_RWX instead of forcing it on"
* tag 'riscv-for-linus-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Avoid kgdb.h including gdb_xml.h to solve unused-const-variable warning
kgdb: Move the extern declaration kgdb_has_hit_break() to generic kgdb.h
riscv: Fix "no previous prototype" compile warning in kgdb.c file
riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX
kgdb: enable arch to support XML packet.
|
|
All conflicts seemed rather trivial, with some guidance from
Saeed Mameed on the tc_ct.c one.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a (COMPILE_TEST) build error when CONFIG_OF is not set/enabled
by adding a stub for of_get_next_parent().
../drivers/soc/qcom/qcom-geni-se.c:819:11: error: implicit declaration of function 'of_get_next_parent'; did you mean 'of_get_parent'? [-Werror=implicit-function-declaration]
../drivers/soc/qcom/qcom-geni-se.c:819:9: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
Fixes: 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/ce0d7561-ff93-d267-b57a-6505014c728c@infradead.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
|
|
The seccomp filter used to be released in free_task() which is called
asynchronously via call_rcu() and assorted mechanisms. Since we need
to inform tasks waiting on the seccomp notifier when a filter goes empty
we will notify them as soon as a task has been marked fully dead in
release_task(). To not split seccomp cleanup into two parts, move
filter release out of free_task() and into release_task() after we've
unhashed struct task from struct pid, exited signals, and unlinked it
from the threadgroups' thread list. We'll put the empty filter
notification infrastructure into it in a follow up patch.
This also renames put_seccomp_filter() to seccomp_filter_release() which
is a more descriptive name of what we're doing here especially once
we've added the empty filter notification mechanism in there.
We're also NULL-ing the task's filter tree entrypoint which seems
cleaner than leaving a dangling pointer in there. Note that this shouldn't
need any memory barriers since we're calling this when the task is in
release_task() which means it's EXIT_DEAD. So it can't modify its seccomp
filters anymore. You can also see this from the point where we're calling
seccomp_filter_release(). It's after __exit_signal() and at this point,
tsk->sighand will already have been NULLed which is required for
thread-sync and filter installation alike.
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Denton <mpdenton@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jann Horn <jannh@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Jeffrey Vander Stoep <jeffv@google.com>
Cc: Linux Containers <containers@lists.linux-foundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200531115031.391515-2-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
A common question asked when debugging seccomp filters is "how many
filters are attached to your process?" Provide a way to easily answer
this question through /proc/$pid/status with a "Seccomp_filters" line.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2020-07-02
This series introduces some fixes to mlx5 driver.
V1->v2:
- Drop "ip -s" patch and mirred device hold reference patch.
- Will revise them in a later submission.
Please pull and let me know if there is any problem.
For -stable v5.2
('net/mlx5: Fix eeprom support for SFP module')
For -stable v5.4
('net/mlx5e: Fix 50G per lane indication')
For -stable v5.5
('net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash')
('net/mlx5e: Fix VXLAN configuration restore after function reload')
For -stable v5.7
('net/mlx5e: CT: Fix memory leak in cleanup')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cater to devices which:
(a) may want to sleep in the callbacks;
(b) only have IPv4 support;
(c) need all the programming to happen while the netdev is up.
Drivers attach UDP tunnel offload info struct to their netdevs,
where they declare how many UDP ports of various tunnel types
they support. Core takes care of tracking which ports to offload.
Use a fixed-size array since this matches what almost all drivers
do, and avoids a complexity and uncertainty around memory allocations
in an atomic context.
Make sure that tunnel drivers don't try to replay the ports when
new NIC netdev is registered. Automatic replays would mess up
reference counting, and will be removed completely once all drivers
are converted.
v4:
- use a #define NULL to avoid build issues with CONFIG_INET=n.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
debugfs_create_u32_array() allocates a small structure to wrap
the data and size information about the array. If users ever
try to remove the file this leads to a leak since nothing ever
frees this wrapper.
That said there are no upstream users of debugfs_create_u32_array()
that'd remove a u32 array file (we only have one u32 array user in
CMA), so there is no real bug here.
Make callers pass a wrapper they allocated. This way the lifetime
management of the wrapper is on the caller, and we can avoid the
potential leak in debugfs.
CC: Chucheng Luo <luochucheng@vivo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hmm_range_fault() returns an array of page frame numbers and flags for how
the pages are mapped in the requested process' page tables. The PFN can be
used to get the struct page with hmm_pfn_to_page() and the page size order
can be determined with compound_order(page).
However, if the page is larger than order 0 (PAGE_SIZE), there is no
indication that a compound page is mapped by the CPU using a larger page
size. Without this information, the caller can't safely use a large device
PTE to map the compound page because the CPU might be using smaller PTEs
with different read/write permissions.
Add a new function hmm_pfn_to_map_order() to return the mapping size order
so that callers know the pages are being mapped with consistent
permissions and a large device page table mapping can be used if one is
available.
This will allow devices to optimize mapping the page into HW by avoiding
or batching work for huge pages. For instance the dma_map can be done with
a high order directly.
Link: https://lore.kernel.org/r/20200701225352.9649-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
"External-facing" devices are internal devices that expose PCIe hierarchies
such as Thunderbolt outside the platform [1]. Previously these internal
devices were marked as "untrusted" the same as devices downstream from
them.
Use the ACPI or DT information to identify external-facing devices, but
only mark the devices *downstream* from them as "untrusted" [2]. The
external-facing device itself is no longer marked as untrusted.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports
[2] https://lore.kernel.org/linux-pci/20200610230906.GA1528594@bjorn-Precision-5520/
Link: https://lore.kernel.org/r/20200707224604.3737893-3-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Currently the ACS capability is being looked up at a number of places. Read
and store it once at enumeration so that it can be used by all later. No
functional change intended.
Link: https://lore.kernel.org/r/20200707224604.3737893-2-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Pull in-kernel read and write op cleanups from Christoph Hellwig:
"Cleanup in-kernel read and write operations
Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
all users of in-kernel file I/O use them if they don't use iov_iter
based methods already.
The new WARN_ONs in combination with syzcaller already found a missing
input validation in 9p. The fix should be on your way through the
maintainer ASAP".
[ This is prep-work for the real changes coming 5.9 ]
* tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc:
fs: remove __vfs_read
fs: implement kernel_read using __kernel_read
integrity/ima: switch to using __kernel_read
fs: add a __kernel_read helper
fs: remove __vfs_write
fs: implement kernel_write using __kernel_write
fs: check FMODE_WRITE in __kernel_write
fs: unexport __kernel_write
bpfilter: switch to kernel_write
autofs: switch to kernel_write
cachefiles: switch to kernel_write
|
|
Pull dma-mapping fixes from Christoph Hellwig:
- add a warning when the atomic pool is depleted (David Rientjes)
- protect the parameters of the new scatterlist helper macros (Marek
Szyprowski )
* tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping:
scatterlist: protect parameters of the sg_table related macros
dma-mapping: warn when coherent pool is depleted
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Fix gfs2 readahead deadlocks by adding a IOCB_NOIO flag that allows
gfs2 to use the generic fiel read iterator functions without having to
worry about being called back while holding locks".
* tag 'gfs2-v5.8-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Rework read and page fault locking
fs: Add IOCB_NOIO flag for generic_file_read_iter
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617175647.GA26370@embeddedor
|
|
It's helpful to be able to look at device link details from sysfs. So,
expose it in sysfs.
Say device-A is supplier of device-B. These are the additional files
this patch would create:
/sys/class/devlink/device-A:device-B/
auto_remove_on
consumer/ -> .../device-B/
runtime_pm
status
supplier/ -> .../device-A/
sync_state_only
/sys/devices/.../device-A/
consumer:device-B/ -> /sys/class/devlink/device-A:device-B/
/sys/devices/.../device-B/
supplier:device-A/ -> /sys/class/devlink/device-A:device-B/
That way:
To get a list of all the device link in the system:
ls /sys/class/devlink/
To get the consumer names and links of a device:
ls -d /sys/devices/.../device-X/consumer:*
To get the supplier names and links of a device:
ls -d /sys/devices/.../device-X/supplier:*
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200521191800.136035-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With the earlier patch in this series, all devices that deferred probe
due to fw_devlink_pause() will have their probes delayed till the
deferred probe thread is kicked off during late_initcall. This will also
affect all their consumers.
This delayed probing in unnecessary. So this patch just keeps track of
the devices that had their probe deferred due to fw_devlink_pause() and
attempts to probe them once during fw_devlink_resume().
Fixes: 716a7a259690 ("driver core: fw_devlink: Add support for batching fwnode parsing")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200701194259.3337652-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The defer_sync field is used as a hook to add the device to the
deferred_sync list. Rename it so that it's more meaningful for the next
patch that'll also use this field as a hook to a deferred_fw_devlink
list.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200701194259.3337652-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"physmem" in the memblock allocator is somewhat weird: it's not actually
used for allocation, it's simply information collected during boot, which
describes the unmodified physical memory map at boot time, without any
standby/hotplugged memory. It's only used on s390 and is currently the
only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK.
Physmem isn't numa aware and current users don't specify any flags. Let's
hide it from the user, exposing only for_each_physmem(), and simplify. The
interface for physmem is now really minimalistic:
- memblock_physmem_add() to add ranges
- for_each_physmem() / __next_physmem_range() to walk physmem ranges
Don't place it into an __init section and don't discard it without
CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove
the __meminit notifier to avoid section mismatch warnings once
CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with
CONFIG_HAVE_MEMBLOCK_PHYS_MAP.
While fixing up the documentation, sneak in some related cleanups. We can
stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Message-Id: <20200701141830.18749-2-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In order to support new chip rts5228, the definitions of some internal
registers and workflow have to be modified.
Added rts5228.c rts5228.h for independent functions of the new chip rts5228
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20200706070259.32565-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
