| Age | Commit message (Collapse) | Author |
|---|
|
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.12
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
* tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
rtc: support i.MX95 BBM RTC
input: keyboard: support i.MX95 BBM module
firmware: imx: Add i.MX95 MISC driver
firmware: arm_scmi: Add initial support for i.MX MISC protocol
firmware: arm_scmi: Add initial support for i.MX BBM protocol
firmware: arm_scmi: Add NXP i.MX95 SCMI documentation
dt-bindings: firmware: Add i.MX95 SCMI Extension protocol
firmware: arm_scmi: Replace comma with the semicolon
firmware: arm_scmi: Replace the use of of_node_put() to __free(device_node)
firmware: arm_scmi: Fix trivial whitespace/coding style issues
firmware: arm_scmi: Use max-rx-timeout-ms from devicetree
dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms
firmware: arm_scmi: Remove const from transport descriptors
firmware: arm_scmi: Simplify with scoped for each OF child loop
firmware: arm_scmi: Update various protocols versions
firmware: arm_scmi: Remove legacy transport-layer code
firmware: arm_scmi: Make VirtIO transport a standalone driver
firmware: arm_scmi: Make OPTEE transport a standalone driver
firmware: arm_scmi: Make SMC transport a standalone driver
firmware: arm_scmi: Make MBOX transport a standalone driver
...
Link: https://lore.kernel.org/r/20240830135918.2383664-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.12
The main addition this time is the basic support for FF-A v1.2
specification which includes support for newly added:
1. FFA_MSG_SEND_DIRECT_{REQ,RESP}2
2. FFA_PARTITION_INFO_GET_REGS
3. FFA_YIELD support in direct messaging
Apart from these, the changes include support to fetch the Rx/Tx buffer
size using FFA_FEATURES, addition of the FF-A FIDs for v1.2 and some
coding style cleanups.
* tag 'ffa-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fetch the Rx/Tx buffer size using ffa_features()
firmware: arm_ffa: Add support for FFA_YIELD in direct messaging
firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2
firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS
firmware: arm_ffa: Move the function ffa_features() earlier
firmware: arm_ffa: Update the FF-A command list with v1.2 additions
firmware: arm_ffa: Some coding style fixes
Link: https://lore.kernel.org/r/20240830135759.2383431-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_DIR_IN instead of GPIOF_IN, shrink the legacy definitions
by killing those GPIOF_DIR_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy
definitions by killing those GPIOF_INIT_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.12
1. Tegra210 EMC: Driver refactoring and rework.
2. Tegra186 EMC: Drop unused function.
3. FSL WEIM: Correct fsl,weim-cs-timing property to properly validate it
as an array.
4. TI AEMIF: Drop platform data support.
5. TI EMIF: Switch to of_property_read_bool().
6. Several cleanups in multiple drivers: TI AEMIF and EMIF, Tegra
EMC/MC, Atmel EBI, Samsung Exynos5422 DMC, STM32 FMC2 EBI, OMAP GPMC,
PL172 and PL1353 SMC. These are mostly code simplifying around
probe() like using
- devm_clk_get_enabled(),
- dev_err_probe(),
- scoped device node handling (cleanup.h),
- scoped for each OF child loops,
- scoped/guard locks.
* tag 'memory-controller-drv-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (35 commits)
memory: mtk-smi: Use devm_clk_get_enabled()
memory: pl353-smc: simplify with devm_clk_get_enabled()
memory: pl353-smc: simplify with dev_err_probe()
memory: pl172: simplify with devm_clk_get_enabled()
memory: pl172: simplify with dev_err_probe()
memory: omap-gpmc: simplify locking with guard()
memory: emif: simplify locking with guard()
memory: emif: drop unused 'irq_state' member
memory: ti-aemif: Revert "memory: ti-aemif: don't needlessly iterate over child nodes"
memory: ti-aemif: simplify with scoped for each OF child loop
memory: ti-aemif: simplify with dev_err_probe()
memory: tegra30-emc: simplify with scoped for each OF child loop
memory: tegra20-emc: simplify with scoped for each OF child loop
memory: tegra124-emc: simplify with scoped for each OF child loop
memory: tegra-mc: simplify with scoped for each OF child loop
memory: stm32-fmc2-ebi: simplify with dev_err_probe()
memory: stm32-fmc2-ebi: simplify with scoped for each OF child loop
memory: samsung: exynos5422-dmc: use scoped device node handling to simplify error paths
memory: samsung: exynos5422-dmc: simplify dmc->dev usage
memory: atmel-ebi: simplify with scoped for each OF child loop
...
Link: https://lore.kernel.org/r/20240827122926.30794-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are no more board files defining platform data for this driver so
remove the header and support from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- x2apic_disable() clears x2apic_state and x2apic_mode unconditionally,
even when the state is X2APIC_ON_LOCKED, which prevents the kernel to
disable it thereby creating inconsistent state.
Reorder the logic so it actually works correctly
- The XSTATE logic for handling LBR is incorrect as it assumes that
XSAVES supports LBR when the CPU supports LBR. In fact both
conditions need to be true. Otherwise the enablement of LBR in the
IA32_XSS MSR fails and subsequently the machine crashes on the next
XRSTORS operation because IA32_XSS is not initialized.
Cache the XSTATE support bit during init and make the related
functions use this cached information and the LBR CPU feature bit to
cure this.
- Cure a long standing bug in KASLR
KASLR uses the full address space between PAGE_OFFSET and vaddr_end
to randomize the starting points of the direct map, vmalloc and
vmemmap regions. It thereby limits the size of the direct map by
using the installed memory size plus an extra configurable margin for
hot-plug memory. This limitation is done to gain more randomization
space because otherwise only the holes between the direct map,
vmalloc, vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel,
so the memory hot-plug and resource management related code paths
still operate under the assumption that the available address space
can be determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of
the direct map and if unlucky this address is in the vmalloc space,
which causes high_memory to become greater than VMALLOC_START and
consequently causes iounmap() to fail for valid ioremap addresses.
Cure this by exposing the end of the direct map via PHYSMEM_END and
use that for the memory hot-plug and resource management related
places instead of relying on MAX_PHYSMEM_BITS. In the KASLR case
PHYSMEM_END maps to a variable which is initialized by the KASLR
initialization and otherwise it is based on MAX_PHYSMEM_BITS as
before.
- Prevent a data leak in mmio_read(). The TDVMCALL exposes the value of
an initialized variabled on the stack to the VMM. The variable is
only required as output value, so it does not have to exposed to the
VMM in the first place.
- Prevent an array overrun in the resource control code on systems with
Sub-NUMA Clustering enabled because the code failed to adjust the
index by the number of SNC nodes per L3 cache.
* tag 'x86-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix arch_mbm_* array overrun on SNC
x86/tdx: Fix data leak in mmio_read()
x86/kaslr: Expose and use the end of the physical memory address space
x86/fpu: Avoid writing LBR bit to IA32_XSS unless supported
x86/apic: Make x2apic_disable() work correctly
|
|
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
|
|
This patch introduces CONFIG_CPUSETS_V1 and guard cpuset-v1 code under
CONFIG_CPUSETS_V1. The default value of CONFIG_CPUSETS_V1 is N, so that
user who adopted v2 don't have 'pay' for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Useful to preallocate dma fence array and then arm in path of reclaim or
a dma fence.
v2:
- s/arm/init (Christian)
- Drop !array warn (Christian)
v3:
- Fix kernel doc typos (dim)
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170144.2492062-2-matthew.brost@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
|
|
The gpmc_onenand_init() have been removed since
commit 2514830b8b8c ("ARM: OMAP2+: Remove gpmc-onenand"), and now
it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240826035823.4043171-1-cuigaosheng1@huawei.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Introduce a device-managed variant of register_framebuffer() which
automatically unregisters the framebuffer on device destruction.
This can simplify the error handling and resource management in drivers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
pKVM relies on hypercalls to expose services such as memory sharing to
protected guests. Tentatively allocate a block of 58 hypercalls (i.e.
fill the remaining space in the first 64 function IDs) for pKVM usage,
as future extensions such as pvIOMMU support, range-based memory sharing
and validation of assigned devices will require additional services.
Suggested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86a5h5yg5y.wl-maz@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-8-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Hook up pKVM's MMIO_GUARD hypercall so that ioremap() and friends will
register the target physical address as MMIO with the hypervisor,
allowing guest exits to that page to be emulated by the host with full
syndrome information.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-7-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If we detect the presence of pKVM's SHARE and UNSHARE hypercalls, then
register a backend implementation of the mem_encrypt API so that things
like DMA buffers can be shared appropriately with the host.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-5-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement a pKVM protected guest driver to probe the presence of pKVM
and determine the memory protection granule using the HYP_MEMINFO
hypercall.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When adding devm_regulator_bulk_get_const() I missed adding a stub for
when CONFIG_REGULATOR is not enabled. Under certain conditions (like
randconfig testing) this can cause the compiler to reports errors
like:
error: implicit declaration of function 'devm_regulator_bulk_get_const';
did you mean 'devm_regulator_bulk_get_enable'?
Add the stub.
Fixes: 1de452a0edda ("regulator: core: Allow drivers to define their init data as const")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408301813.TesFuSbh-lkp@intel.com/
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20240830073511.1.Ib733229a8a19fad8179213c05e1af01b51e42328@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is only one called of alloc_page_buffers and it doesn't require
__GFP_NOFAIL so drop this allocation mode.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Link: https://lore.kernel.org/r/20240829130640.1397970-1-mhocko@kernel.org
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
PCI ATS has a global Smallest Translation Unit field that is located in
the PF but shared by all of the VFs.
The expectation is that the STU will be set to the root port's global STU
capability which is driven by the IO page table configuration of the iommu
HW. Today it becomes set when the iommu driver first enables ATS.
Thus, to enable ATS on the VF, the PF must have already had the correct
STU programmed, even if ATS is off on the PF.
Unfortunately the PF only programs the STU when the PF enables ATS. The
iommu drivers tend to leave ATS disabled when IDENTITY translation is
being used.
Thus we can get into a state where the PF is setup to use IDENTITY with
the DMA API while the VF would like to use VFIO with a PAGING domain and
have ATS turned on. This fails because the PF never loaded a PAGING domain
and so it never setup the STU, and the VF can't do it.
The simplest solution is to have the iommu driver set the ATS STU when it
probes the device. This way the ATS STU is loaded immediately at boot time
to all PFs and there is no issue when a VF comes to use it.
Add a new call pci_prepare_ats() which should be called by iommu drivers
in their probe_device() op for every PCI device if the iommu driver
supports ATS. This will setup the STU based on whatever page size
capability the iommu HW has.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-0fb4d2ab6770+7e706-ats_vf_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().
This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():
$ perf record -e arm_spe/pa_enable/
Error:
Access to performance monitoring and observability operations is
limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
setting ...
Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that we use the wait var event mechanism make i_state a u32 and free
up 4 bytes. This means we currently have two 4 byte holes in struct
inode which we can pack.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-6-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Port the __I_NEW mechanism to use the new var event mechanism.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-4-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
so that we can use the first bits to derive unique addresses from
i_state.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-2-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The i_state member is an unsigned long so that it can be used with the
wait bit infrastructure which expects unsigned long. This wastes 4 bytes
which we're unlikely to ever use. Switch to using the var event wait
mechanism using the address of the bit. Thanks to Linus for the address
idea.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-1-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The underscore variants are for uapi whereas the non-underscore variants
are for in-kernel consumers.
Link: https://lore.kernel.org/r/20240822-anwerben-nutzung-1cd6c82a565f@brauner
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This helper has been unused for a while now.
Link: https://lore.kernel.org/r/20240822-bewuchs-werktag-46672b3c0606@brauner
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Afaict, we can just rely on inode->i_dio_count for waiting instead of
this awkward indirection through __I_DIO_WAKEUP. This survives LTP dio
and xfstests dio tests.
Link: https://lore.kernel.org/r/20240816-vfs-misc-dio-v1-1-80fe21a2c710@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is another flag that is statically set and doesn't need to use up
an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit.
(1) mem_open() used from proc_mem_operations
(2) adi_open() used from adi_fops
(3) drm_open_helper():
(3.1) accel_open() used from DRM_ACCEL_FOPS
(3.2) drm_open() used from
(3.2.1) amdgpu_driver_kms_fops
(3.2.2) psb_gem_fops
(3.2.3) i915_driver_fops
(3.2.4) nouveau_driver_fops
(3.2.5) panthor_drm_driver_fops
(3.2.6) radeon_driver_kms_fops
(3.2.7) tegra_drm_fops
(3.2.8) vmwgfx_driver_fops
(3.2.9) xe_driver_fops
(3.2.10) DRM_GEM_FOPS
(3.2.11) DEFINE_DRM_GEM_DMA_FOPS
(4) struct memdev sets fmode flags based on type of device opened. For
devices using struct mem_fops unsigned offset is used.
Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts
into the open helper to ensure that the flag is always set.
Link: https://lore.kernel.org/r/20240809-work-fop_unsigned-v1-1-658e054d893e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In do_dentry_open() the usage is:
f->f_op = fops_get(inode->i_fop);
In generated asm the compiler emits 2 reads from inode->i_fop instead of
just one.
This popped up due to false-sharing where loads from that offset end up
bouncing a cacheline during parallel open. While this is going to be fixed,
the spurious load does not need to be there.
This makes do_dentry_open() go down from 1177 to 1154 bytes.
fops_put() is patched to maintain some consistency.
No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240810064753.1211441-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
These inlines show up in the fast path (e.g., in do_dentry_open()) and
induce said full barrier regarding i_flctx access when in most cases the
pointer is NULL.
The pointer can be safely checked before issuing the barrier, dodging it
in most cases as a result.
It is plausible the consume fence would be sufficient, but I don't want
to go audit all callers regarding what they before calling here.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240806172846.886570-1-mjguzik@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Another week, another set of GPU fixes. amdgpu and vmwgfx leading the
charge, then i915 and xe changes along with v3d and some other bits.
The TTM revert is due to some stuttering graphical apps probably due
to longer stalls while prefaulting.
Seems pretty much where I'd expect things,
ttm:
- revert prefault change, caused stutters
aperture:
- handle non-VGA devices bettter
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
i915:
- Fix #11195: The external display connect via USB type-C dock stays
blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
- Move ARL GuC firmware to correct version
xe:
- Invalidate media_gt TLBs
- Fix HWMON i1 power setup write command
vmwgfx:
- prevent unmapping active read buffers
- fix prime with external buffers
- disable coherent dumb buffers without 3d
v3d:
- disable preemption while updating GPU stats"
* tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16
drm/v3d: Disable preemption while updating GPU stats
drm/amd/pm: Drop unsupported features on smu v14_0_2
drm/amd/pm: Add support for new P2S table revision
drm/amdgpu: support for gc_info table v1.3
drm/amd/display: avoid using null object of framebuffer
drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs
drm/amd/pm: update message interface for smu v14.0.2/3
drm/amdgpu/swsmu: always force a state reprogram on init
drm/amdgpu/smu13.0.7: print index for profiles
drm/amdgpu: align pp_power_profile_mode with kernel docs
drm/i915/dp_mst: Fix MST state after a sink reset
drm/xe: Invalidate media_gt TLBs
drm/i915: ARL requires a newer GSC firmware
drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
video/aperture: optionally match the device in sysfb_disable()
drm/vmwgfx: Disable coherent dumb buffers without 3d
drm/vmwgfx: Fix prime with external buffers
drm/vmwgfx: Prevent unmapping active read buffers
Revert "drm/ttm: increase ttm pre-fault value to PMD size"
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/faraday/ftgmac100.c
4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible")
e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org
net/ipv4/tcp.c
bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort")
edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset")
https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au
No adjacent changes.
Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch to the new kmem_cache_create_rcu() helper which allows us to use
a custom free pointer offset avoiding the need to have an external free
pointer which would grow struct file behind our backs.
Link: https://lore.kernel.org/r/20240828-work-kmem_cache-rcu-v3-3-5460bc1f09f6@kernel.org
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When a kmem cache is created with SLAB_TYPESAFE_BY_RCU the free pointer
must be located outside of the object because we don't know what part of
the memory can safely be overwritten as it may be needed to prevent
object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up adding a
new cacheline. This is the case for e.g., struct file. After having it
shrunk down by 40 bytes and having it fit in three cachelines we still
have SLAB_TYPESAFE_BY_RCU adding a fourth cacheline because it needs to
accommodate the free pointer.
Add a new kmem_cache_create_rcu() function that allows the caller to
specify an offset where the free pointer is supposed to be placed.
Link: https://lore.kernel.org/r/20240828-work-kmem_cache-rcu-v3-2-5460bc1f09f6@kernel.org
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that we shrunk struct file to 192 bytes aka 3 cachelines reorder
struct file to not leave any holes or have members cross cachelines.
Add a short comment to each of the fields and mark the cachelines.
It's possible that we may have to tweak this based on profiling in the
future. So far I had Jens test this comparing io_uring with non-fixed
and fixed files and it improved performance. The layout is a combination
of Jens' and my changes.
Link: https: //lore.kernel.org/r/20240824-peinigen-hocken-7384b977c643@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add support for the AXP717 PMIC to utilize the ADC (for reading
voltage, current, and temperature information from the PMIC) as well
as the USB charger and battery.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240821215456.962564-12-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
queue_limits_max_zone_append_sectors doesn't change the lim argument,
so mark it as const.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current setup with bio_may_exceed_limit and __bio_split_to_limits
is a bit of a mess.
Change it so that __bio_split_to_limits does all the work and is just
a variant of bio_split_to_limits that returns nr_segs. This is done
by inlining it and instead have the various bio_split_* helpers directly
submit the potentially split bios.
To support btrfs, the rw version has a lower level helper split out
that just returns the offset to split. This turns out to nicely clean
up the btrfs flow as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge thermal core updates for 6.12 which, among other things, rework
the thermal driver interface for binding cooling devices to thermal
zones and add a thermal core testing module:
- Update some thermal drivers to eliminate thermal_zone_get_trip()
calls from them and get rid of that function (Rafael Wysocki).
- Update the thermal sysfs code to store trip point attributes in trip
descriptors and get to trip points via attribute pointers (Rafael
Wysocki).
- Move the computation of the low and high boundaries for
thermal_zone_set_trips() to __thermal_zone_device_update() (Daniel
Lezcano).
- Introduce a debugfs-based facility for thermal core testing (Rafael
Wysocki).
- Replace the thermal zone .bind() and .unbind() callbacks for binding
cooling devices to thermal zones with one .should_bind() callback
used for deciding whether or not a given cooling devices should be
bound to a given trip point in a given thermal zone (Rafael Wysocki).
- Eliminate code that has no more users after the other changes, drop
some redundant checks from the thermal core and clean it up (Rafael
Wysocki).
- Fix rounding of delay jiffies in the thermal core (Rafael Wysocki).
* thermal-core: (31 commits)
thermal: core: Drop tz field from struct thermal_instance
thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip()
thermal: core: Rename cdev-to-thermal-zone bind/unbind functions
thermal: core: Fix rounding of delay jiffies
thermal: core: Clean up trip bind/unbind functions
thermal: core: Drop unused bind/unbind functions and callbacks
thermal/of: Use the .should_bind() thermal zone callback
thermal: imx: Use the .should_bind() thermal zone callback
mlxsw: core_thermal: Use the .should_bind() thermal zone callback
platform/x86: acerhdf: Use the .should_bind() thermal zone callback
thermal: core: Unexport thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
thermal: ACPI: Use the .should_bind() thermal zone callback
thermal: core: Introduce .should_bind() thermal zone callback
thermal: core: Move thermal zone locking out of bind/unbind functions
thermal: sysfs: Use the dev argument in instance-related show/store
thermal: core: Drop redundant thermal instance checks
thermal: core: Rearrange checks in thermal_bind_cdev_to_trip()
thermal: core: Fold two functions into their respective callers
thermal: Introduce a debugfs-based testing facility
thermal/core: Compute low and high boundaries in thermal_zone_device_update()
...
|
|
There is a need for userspace applications to open HID devices directly.
Use-cases include configuration of gaming mice or direct access to
joystick devices. The latter is currently handled by the uaccess tag in
systemd, other devices include more custom/local configurations or just
sudo.
A better approach is what we already have for evdev devices: give the
application a file descriptor and revoke it when it may no longer access
that device.
This patch is the hidraw equivalent to the EVIOCREVOKE ioctl, see
commit c7dc65737c9a ("Input: evdev - add EVIOCREVOKE ioctl") for full
details.
An MR for systemd-logind has been filed here:
https://github.com/systemd/systemd/pull/33970
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-1-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The i.MX95 System manager exports SCMI MISC protocol for linux to do
various settings, such as set board gpio expander as wakeup source.
The driver is to add the support.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-5-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
i.MX95 System Manager(SM) firmware includes a SCMI vendor protocol, SCMI
MISC protocol which includes controls that are misc settings/actions that
must be exposed from the SM to agents. They are device specific and are
usually define to access bit fields in various mix block control modules,
IOMUX_GPR, and other General Purpose registers, Control Status Registers
owned by the SM.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-3-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
i.MX95 has a battery-backed module(BBM), which has persistent storage
(GPR), an RTC, and the ON/OFF button. The System Manager(SM) firmware
use SCMI vendor protocol(SCMI BBM) to let agent be able to use GPR, RTC
and ON/OFF button.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-2-e600ed9e9271@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
