| Age | Commit message (Collapse) | Author |
|---|
|
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The iommu_report_device_fault function was updated to return void while
assuming that drivers only need to call iommu_report_device_fault() for
reporting an iopf. This implementation causes following problems:
1. The drivers rely on the core code to call it's page_reponse,
however, when a fault is received and no fault capable domain is
attached / iopf_param is NULL, the ops->page_response is NOT called
causing the device to stall in case the fault type was PAGE_REQ.
2. The arm_smmu_v3 driver relies on the returned value to log errors
returning void from iommu_report_device_fault causes these events to
be missed while logging.
Modify the iommu_report_device_fault function to return -EINVAL for
cases where no fault capable domain is attached or iopf_param was NULL
and calls back to the driver (ops->page_response) in case the fault type
was IOMMU_FAULT_PAGE_REQ. The returned value can be used by the drivers
to log the fault/event as needed.
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Closes: https://lore.kernel.org/all/6147caf0-b9a0-30ca-795e-a1aa502a5c51@huawei.com/
Fixes: 3dfa64aecbaf ("iommu: Make iommu_report_device_fault() return void")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240816104906.1010626-1-praan@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC already checks for arguments that are marked with the "nonstring"[1]
attribute when used on standard C String API functions (e.g. strcpy). Gain
this compile-time checking also for the kernel's primary string copying
function, strscpy().
Note that Clang has neither "nonstring" nor __builtin_has_attribute().
Link: https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html#index-nonstring-variable-attribute [1]
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20240805214340.work.339-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
|
|
key_lookup() will always return a key, even if that key is revoked
or invalidated. So check for invalid keys before continuing.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
LSM hooks are currently invoked from a linked list as indirect calls
which are invoked using retpolines as a mitigation for speculative
attacks (Branch History / Target injection) and add extra overhead which
is especially bad in kernel hot paths:
security_file_ioctl:
0xff...0320 <+0>: endbr64
0xff...0324 <+4>: push %rbp
0xff...0325 <+5>: push %r15
0xff...0327 <+7>: push %r14
0xff...0329 <+9>: push %rbx
0xff...032a <+10>: mov %rdx,%rbx
0xff...032d <+13>: mov %esi,%ebp
0xff...032f <+15>: mov %rdi,%r14
0xff...0332 <+18>: mov $0xff...7030,%r15
0xff...0339 <+25>: mov (%r15),%r15
0xff...033c <+28>: test %r15,%r15
0xff...033f <+31>: je 0xff...0358 <security_file_ioctl+56>
0xff...0341 <+33>: mov 0x18(%r15),%r11
0xff...0345 <+37>: mov %r14,%rdi
0xff...0348 <+40>: mov %ebp,%esi
0xff...034a <+42>: mov %rbx,%rdx
0xff...034d <+45>: call 0xff...2e0 <__x86_indirect_thunk_array+352>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Indirect calls that use retpolines leading to overhead, not just due
to extra instruction but also branch misses.
0xff...0352 <+50>: test %eax,%eax
0xff...0354 <+52>: je 0xff...0339 <security_file_ioctl+25>
0xff...0356 <+54>: jmp 0xff...035a <security_file_ioctl+58>
0xff...0358 <+56>: xor %eax,%eax
0xff...035a <+58>: pop %rbx
0xff...035b <+59>: pop %r14
0xff...035d <+61>: pop %r15
0xff...035f <+63>: pop %rbp
0xff...0360 <+64>: jmp 0xff...47c4 <__x86_return_thunk>
The indirect calls are not really needed as one knows the addresses of
enabled LSM callbacks at boot time and only the order can possibly
change at boot time with the lsm= kernel command line parameter.
An array of static calls is defined per LSM hook and the static calls
are updated at boot time once the order has been determined.
With the hook now exposed as a static call, one can see that the
retpolines are no longer there and the LSM callbacks are invoked
directly:
security_file_ioctl:
0xff...0ca0 <+0>: endbr64
0xff...0ca4 <+4>: nopl 0x0(%rax,%rax,1)
0xff...0ca9 <+9>: push %rbp
0xff...0caa <+10>: push %r14
0xff...0cac <+12>: push %rbx
0xff...0cad <+13>: mov %rdx,%rbx
0xff...0cb0 <+16>: mov %esi,%ebp
0xff...0cb2 <+18>: mov %rdi,%r14
0xff...0cb5 <+21>: jmp 0xff...0cc7 <security_file_ioctl+39>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Static key enabled for SELinux
0xffffffff818f0cb7 <+23>: jmp 0xff...0cde <security_file_ioctl+62>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Static key enabled for BPF LSM. This is something that is changed to
default to false to avoid the existing side effect issues of BPF LSM
[1] in a subsequent patch.
0xff...0cb9 <+25>: xor %eax,%eax
0xff...0cbb <+27>: xchg %ax,%ax
0xff...0cbd <+29>: pop %rbx
0xff...0cbe <+30>: pop %r14
0xff...0cc0 <+32>: pop %rbp
0xff...0cc1 <+33>: cs jmp 0xff...0000 <__x86_return_thunk>
0xff...0cc7 <+39>: endbr64
0xff...0ccb <+43>: mov %r14,%rdi
0xff...0cce <+46>: mov %ebp,%esi
0xff...0cd0 <+48>: mov %rbx,%rdx
0xff...0cd3 <+51>: call 0xff...3230 <selinux_file_ioctl>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Direct call to SELinux.
0xff...0cd8 <+56>: test %eax,%eax
0xff...0cda <+58>: jne 0xff...0cbd <security_file_ioctl+29>
0xff...0cdc <+60>: jmp 0xff...0cb7 <security_file_ioctl+23>
0xff...0cde <+62>: endbr64
0xff...0ce2 <+66>: mov %r14,%rdi
0xff...0ce5 <+69>: mov %ebp,%esi
0xff...0ce7 <+71>: mov %rbx,%rdx
0xff...0cea <+74>: call 0xff...e220 <bpf_lsm_file_ioctl>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Direct call to BPF LSM.
0xff...0cef <+79>: test %eax,%eax
0xff...0cf1 <+81>: jne 0xff...0cbd <security_file_ioctl+29>
0xff...0cf3 <+83>: jmp 0xff...0cb9 <security_file_ioctl+25>
0xff...0cf5 <+85>: endbr64
0xff...0cf9 <+89>: mov %r14,%rdi
0xff...0cfc <+92>: mov %ebp,%esi
0xff...0cfe <+94>: mov %rbx,%rdx
0xff...0d01 <+97>: pop %rbx
0xff...0d02 <+98>: pop %r14
0xff...0d04 <+100>: pop %rbp
0xff...0d05 <+101>: ret
0xff...0d06 <+102>: int3
0xff...0d07 <+103>: int3
0xff...0d08 <+104>: int3
0xff...0d09 <+105>: int3
While this patch uses static_branch_unlikely indicating that an LSM hook
is likely to be not present. In most cases this is still a better choice
as even when an LSM with one hook is added, empty slots are created for
all LSM hooks (especially when many LSMs that do not initialize most
hooks are present on the system).
There are some hooks that don't use the call_int_hook or
call_void_hook. These hooks are updated to use a new macro called
lsm_for_each_hook where the lsm_callback is directly invoked as an
indirect call.
Below are results of the relevant Unixbench system benchmarks with BPF LSM
and SELinux enabled with default policies enabled with and without these
patches.
Benchmark Delta(%): (+ is better)
==========================================================================
Execl Throughput +1.9356
File Write 1024 bufsize 2000 maxblocks +6.5953
Pipe Throughput +9.5499
Pipe-based Context Switching +3.0209
Process Creation +2.3246
Shell Scripts (1 concurrent) +1.4975
System Call Overhead +2.7815
System Benchmarks Index Score (Partial Only): +3.4859
In the best case, some syscalls like eventfd_create benefitted to about
~10%.
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
These macros are a clever trick to determine a count of the number of
LSMs that are enabled in the config to ascertain the maximum number of
static calls that need to be configured per LSM hook.
Without this one would need to generate static calls for the total
number of LSMs in the kernel (even if they are not compiled) times the
number of LSM hooks which ends up being quite wasteful.
Tested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Kui-Feng Lee <sinquersw@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Nacked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: KP Singh <kpsingh@kernel.org>
[PM: added IPE to the count during merge]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
thermal_unbind_cdev_from_trip()
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
are only called locally in the thermal core now, they can be static,
so change their definitions accordingly and drop their headers from
the global thermal header file.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3512161.QJadu78ljV@rjwysocki.net
|
|
The current design of the code binding cooling devices to trip points in
thermal zones is convoluted and hard to follow.
Namely, a driver that registers a thermal zone can provide .bind()
and .unbind() operations for it, which are required to call either
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip(),
respectively, or thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), respectively, for every relevant
trip point and the given cooling device. Moreover, if .bind() is
provided and .unbind() is not, the cleanup necessary during the removal
of a thermal zone or a cooling device may not be carried out.
In other words, the core relies on the thermal zone owners to do the
right thing, which is error prone and far from obvious, even though all
of that is not really necessary. Specifically, if the core could ask
the thermal zone owner, through a special thermal zone callback, whether
or not a given cooling device should be bound to a given trip point in
the given thermal zone, it might as well carry out all of the binding
and unbinding by itself. In particular, the unbinding can be done
automatically without involving the thermal zone owner at all because
all of the thermal instances associated with a thermal zone or cooling
device going away must be deleted regardless.
Accordingly, introduce a new thermal zone operation, .should_bind(),
that can be invoked by the thermal core for a given thermal zone,
trip point and cooling device combination in order to check whether
or not the cooling device should be bound to the trip point at hand.
It takes an additional cooling_spec argument allowing the thermal
zone owner to specify the highest and lowest cooling states of the
cooling device and its weight for the given trip point binding.
Make the thermal core use this operation, if present, in the absence of
.bind() and .unbind(). Note that .should_bind() will be called under
the thermal zone lock.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/9334403.CDJkKcVGEf@rjwysocki.net
|
|
Directly call into dma-iommu just like we have been doing for dma-direct
for a while. This avoids the indirect call overhead for IOMMU ops and
removes the need to have DMA ops entirely for many common configurations.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The hardware DMA limit might not be power of 2. When RAM range starts
above 0, say 4GB, DMA limit of 30 bits should end at 5GB. A single high
bit can not encode this limit.
Use a plain address for the DMA zone limit instead.
Since the DMA zone can now potentially span beyond 4GB physical limit of
DMA32, make sure to use DMA zone for GFP_DMA32 allocations in that case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Adding the NAPI pointer to struct netdev_queue made it grow into another
cacheline, even though there was 44 bytes of padding available.
The struct was historically grouped as follows:
/* read-mostly stuff (align) */
/* ... random control path fields ... */
/* write-mostly stuff (align) */
/* ... 40 byte hole ... */
/* struct dql (align) */
It seems that people want to add control path fields after
the read only fields. struct dql looks pretty innocent
but it forces its own alignment and nothing indicates that
there is a lot of empty space above it.
Move dql above the xmit_lock. This shifts the empty space
to the end of the struct rather than in the middle of it.
Move two example fields there to set an example.
Hopefully people will now add new fields at the end of
the struct. A lot of the read-only stuff is also control
path-only, but if we move it all we'll have another hole
in the middle.
Before:
/* size: 384, cachelines: 6, members: 16 */
/* sum members: 284, holes: 3, sum holes: 100 */
After:
/* size: 320, cachelines: 5, members: 16 */
/* sum members: 284, holes: 1, sum holes: 8 */
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240820205119.1321322-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix htmldocs build warning introduced by 9b59a85a84dc ("workqueue: Don't
call va_start / va_end twice").
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Matthew Brost <matthew.brost@intel.com>
|
|
As pointed out by Stephen Boyd it is possible that during initialization
of the pmic_glink child drivers, the protection-domain notifiers fires,
and the associated work is scheduled, before the client registration
returns and as a result the local "client" pointer has been initialized.
The outcome of this is a NULL pointer dereference as the "client"
pointer is blindly dereferenced.
Timeline provided by Stephen:
CPU0 CPU1
---- ----
ucsi->client = NULL;
devm_pmic_glink_register_client()
client->pdr_notify(client->priv, pg->client_state)
pmic_glink_ucsi_pdr_notify()
schedule_work(&ucsi->register_work)
<schedule away>
pmic_glink_ucsi_register()
ucsi_register()
pmic_glink_ucsi_read_version()
pmic_glink_ucsi_read()
pmic_glink_ucsi_read()
pmic_glink_send(ucsi->client)
<client is NULL BAD>
ucsi->client = client // Too late!
This code is identical across the altmode, battery manager and usci
child drivers.
Resolve this by splitting the allocation of the "client" object and the
registration thereof into two operations.
This only happens if the protection domain registry is populated at the
time of registration, which by the introduction of commit '1ebcde047c54
("soc: qcom: add pd-mapper implementation")' became much more likely.
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd2_a7TjA7J9ShrAbNOd_CoZ3D87twmO5t+nZxC9sX18tA@mail.gmail.com/
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/ZqiyLvP0gkBnuekL@hovoldconsulting.com/
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://lore.kernel.org/all/CAE-0n52JgfCBWiFQyQWPji8cq_rCsviBpW-m72YitgNfdaEhQg@mail.gmail.com/
Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-1-eec53c750a04@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In emergency situations (something has gone wrong but the
system continues to operate), usually important information
(such as a backtrace) is generated via printk(). This
information should be pushed out to the consoles ASAP.
Add per-CPU emergency nesting tracking because an emergency
can arise while in an emergency situation.
Add functions to mark the beginning and end of emergency
sections where the urgent messages are generated.
Perform direct console flushing at the emergency priority if
the current CPU is in an emergency state and it is safe to do
so.
Note that the emergency state is not system-wide. While one CPU
is in an emergency state, another CPU may attempt to print
console messages at normal priority.
Also note that printk() already attempts to flush consoles in
the caller context for normal priority. However, follow-up
changes will introduce printing kthreads, in which case the
normal priority printk() calls will offload to the kthreads.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-32-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
If legacy and nbcon consoles are registered and the nbcon
consoles are allowed to flush (i.e. no boot consoles
registered), the legacy consoles will no longer perform
direct printing on the panic CPU until after the backtrace
has been stored. This will give the safe nbcon consoles a
chance to print the panic messages before allowing the
unsafe legacy consoles to print.
If no nbcon consoles are registered or they are not allowed
to flush because boot consoles are registered, there is no
change in behavior (i.e. legacy consoles will always attempt
to print from the printk() caller context).
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-30-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Add nbcon_atomic_flush_unsafe() to flush all nbcon consoles
using the write_atomic() callback and allowing unsafe hostile
takeovers. Call this at the end of panic() as a final attempt
to flush any pending messages.
Note that legacy consoles use unsafe methods for flushing
from the beginning of panic (see bust_spinlocks()). Therefore,
systems using both legacy and nbcon consoles may still fail to
see panic messages due to unsafe legacy console usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-27-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Currently the port->lock wrappers uart_port_lock(),
uart_port_unlock() (and their variants) only lock/unlock
the spin_lock.
If the port is an nbcon console that has implemented the
write_atomic() callback, the wrappers must also acquire/release
the console context and mark the region as unsafe. This allows
general port->lock synchronization to be synchronized against
the nbcon write_atomic() callback.
Note that __uart_port_using_nbcon() relies on the port->lock
being held while a console is added and removed from the
console list (i.e. all uart nbcon drivers *must* take the
port->lock in their device_lock() callbacks).
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-15-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Provide functions nbcon_device_try_acquire() and
nbcon_device_release() which will try to acquire the nbcon
console ownership with NBCON_PRIO_NORMAL and mark it unsafe for
handover/takeover.
These functions are to be used together with the device-specific
locking when performing non-printing activities on the console
device. They will allow synchronization against the
atomic_write() callback which will be serialized, for higher
priority contexts, only by acquiring the console context
ownership.
Pitfalls:
The API requires to be called in a context with migration
disabled because it uses per-CPU variables internally.
The context is set unsafe for a takeover all the time. It
guarantees full serialization against any atomic_write() caller
except for the final flush in panic() which might try an unsafe
takeover.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-14-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
It was not clear when exactly console_srcu_read_flags() must be
used vs. directly reading @console->flags.
Refactor and clarify that console_srcu_read_flags() is only
needed if the console is registered or the caller is in a
context where the registration status of the console may change
(due to another context).
The function requires the caller holds @console_srcu, which will
ensure that the caller sees an appropriate @flags value for the
registered console and that exit/cleanup routines will not run
if the console is in the process of unregistration.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-13-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Introduce uart_port_set_cons() as a wrapper to set @cons of a
uart_port. The wrapper sets @cons under the port lock in order
to prevent @cons from disappearing while another context is
holding the port lock. This is necessary for a follow-up
commit relating to the port lock wrappers, which rely on @cons
not changing between lock and unlock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Théo Lebrun <theo.lebrun@bootlin.com> # EyeQ5, AMBA-PL011
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240820063001.36405-12-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
It will be necessary at times for the uart nbcon console
drivers to acquire the port lock directly (without the
additional nbcon functionality of the port lock wrappers).
These are special cases such as the implementation of the
device_lock()/device_unlock() callbacks or for internal
port lock wrapper synchronization.
Provide low-level variants __uart_port_lock_irqsave() and
__uart_port_unlock_irqrestore() for this purpose.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240820063001.36405-11-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Console drivers typically must deal with access to the hardware
via user input/output (such as an interactive login shell) and
output of kernel messages via printk() calls. To provide the
necessary synchronization, usually some driver-specific locking
mechanism is used (for example, the port spinlock for uart
serial consoles).
Until now, usage of this driver-specific locking has been hidden
from the printk-subsystem and implemented within the various
console callbacks. However, nbcon consoles would need to use it
even in the generic code.
Add device_lock() and device_unlock() callback which will need
to get implemented by nbcon consoles.
The callbacks will use whatever synchronization mechanism the
driver is using for itself. The minimum requirement is to
prevent CPU migration. It would allow a context friendly
acquiring of nbcon console ownership in non-emergency and
non-panic context.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-9-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The write_atomic() callback has special requirements and is
allowed to use special helper functions. Provide detailed
documentation of the callback so that a developer has a
chance of implementing it correctly.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-8-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The return value of write_atomic() does not provide any useful
information. On the contrary, it makes things more complicated
for the caller to appropriately deal with the information.
Change write_atomic() to not have a return value. If the
message did not get printed due to loss of ownership, the
caller will notice this on its own. If ownership was not lost,
it will be assumed that the driver successfully printed the
message and the sequence number for that console will be
incremented.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-7-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Add validation that printk_deferred_enter()/_exit() are called in
non-migration contexts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-5-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Calling va_start / va_end multiple times is undefined and causes
problems with certain compiler / platforms.
Change alloc_ordered_workqueue_lockdep_map to a macro and updated
__alloc_workqueue to take a va_list argument.
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This helps in easily initializing blocks of code (e.g. static calls and
keys).
UNROLL(N, MACRO, __VA_ARGS__) calls MACRO N times with the first
argument as the index of the iteration. This allows string pasting to
create unique tokens for variable names, function calls etc.
As an example:
#include <linux/unroll.h>
#define MACRO(N, a, b) \
int add_##N(int a, int b) \
{ \
return a + b + N; \
}
UNROLL(2, MACRO, x, y)
expands to:
int add_0(int x, int y)
{
return x + y + 0;
}
int add_1(int x, int y)
{
return x + y + 1;
}
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Nacked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch enhances fsverity's capabilities to support both integrity and
authenticity protection by introducing the exposure of built-in
signatures through a new LSM hook. This functionality allows LSMs,
e.g. IPE, to enforce policies based on the authenticity and integrity of
files, specifically focusing on built-in fsverity signatures. It enables
a policy enforcement layer within LSMs for fsverity, offering granular
control over the usage of authenticity claims. For instance, a policy
could be established to only permit the execution of all files with
verified built-in fsverity signatures.
The introduction of a security_inode_setintegrity() hook call within
fsverity's workflow ensures that the verified built-in signature of a file
is exposed to LSMs. This enables LSMs to recognize and label fsverity files
that contain a verified built-in fsverity signature. This hook is invoked
subsequent to the fsverity_verify_signature() process, guaranteeing the
signature's verification against fsverity's keyring. This mechanism is
crucial for maintaining system security, as it operates in kernel space,
effectively thwarting attempts by malicious binaries to bypass user space
stack interactions.
The second to last commit in this patch set will add a link to the IPE
documentation in fsverity.rst.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch introduces a new hook to save inode's integrity
data. For example, for fsverity enabled files, LSMs can use this hook to
save the existence of verified fsverity builtin signature into the inode's
security blob, and LSMs can make access decisions based on this data.
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak, removed changelog]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
dm-verity provides a strong guarantee of a block device's integrity. As
a generic way to check the integrity of a block device, it provides
those integrity guarantees to its higher layers, including the filesystem
level.
However, critical security metadata like the dm-verity roothash and its
signing information are not easily accessible to the LSMs.
To address this limitation, this patch introduces a mechanism to store
and manage these essential security details within a newly added LSM blob
in the block_device structure.
This addition allows LSMs to make access control decisions on the integrity
data stored within the block_device, enabling more flexible security
policies. For instance, LSMs can now revoke access to dm-verity devices
based on their roothashes, ensuring that only authorized and verified
content is accessible. Additionally, LSMs can enforce policies to only
allow files from dm-verity devices that have a valid digital signature to
execute, effectively blocking any unsigned files from execution, thus
enhancing security against unauthorized modifications.
The patch includes new hook calls, `security_bdev_setintegrity()`, in
dm-verity to expose the dm-verity roothash and the roothash signature to
LSMs via preresume() callback. By using the preresume() callback, it
ensures that the security metadata is consistently in sync with the
metadata of the dm-verity target in the current active mapping table.
The hook calls are depended on CONFIG_SECURITY.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
[PM: moved sig_size field as discussed]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch introduces a new LSM blob to the block_device structure,
enabling the security subsystem to store security-sensitive data related
to block devices. Currently, for a device mapper's mapped device containing
a dm-verity target, critical security information such as the roothash and
its signing state are not readily accessible. Specifically, while the
dm-verity volume creation process passes the dm-verity roothash and its
signature from userspace to the kernel, the roothash is stored privately
within the dm-verity target, and its signature is discarded
post-verification. This makes it extremely hard for the security subsystem
to utilize these data.
With the addition of the LSM blob to the block_device structure, the
security subsystem can now retain and manage important security metadata
such as the roothash and the signing state of a dm-verity by storing them
inside the blob. Access decisions can then be based on these stored data.
The implementation follows the same approach used for security blobs in
other structures like struct file, struct inode, and struct superblock.
The initialization of the security blob occurs after the creation of the
struct block_device, performed by the security subsystem. Similarly, the
security blob is freed by the security subsystem before the struct
block_device is deallocated or freed.
This patch also introduces a new hook security_bdev_setintegrity() to save
block device's integrity data to the new LSM blob. For example, for
dm-verity, it can use this hook to expose its roothash and signing state
to LSMs, then LSMs can save these data into the LSM blob.
Please note that the new hook should be invoked every time the security
information is updated to keep these data current. For example, in
dm-verity, if the mapping table is reloaded and configured to use a
different dm-verity target with a new roothash and signing information,
the previously stored data in the LSM blob will become obsolete. It is
crucial to re-invoke the hook to refresh these data and ensure they are up
to date. This necessity arises from the design of device-mapper, where a
device-mapper device is first created, and then targets are subsequently
loaded into it. These targets can be modified multiple times during the
device's lifetime. Therefore, while the LSM blob is allocated during the
creation of the block device, its actual contents are not initialized at
this stage and can change substantially over time. This includes
alterations from data that the LSM 'trusts' to those it does not, making
it essential to handle these changes correctly. Failure to address this
dynamic aspect could potentially allow for bypassing LSM checks.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: merge fuzz, subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When deleting a directory in the security file system, the existing
securityfs_remove requires the directory to be empty, otherwise
it will do nothing. This leads to a potential risk that the security
file system might be in an unclean state when the intended deletion
did not happen.
This commit introduces a new function securityfs_recursive_remove
to recursively delete a directory without leaving an unclean state.
Co-developed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch introduces a new hook to notify security system that the
content of initramfs has been unpacked into the rootfs.
Upon receiving this notification, the security system can activate
a policy to allow only files that originated from the initramfs to
execute or load into kernel during the early stages of booting.
This approach is crucial for minimizing the attack surface by
ensuring that only trusted files from the initramfs are operational
in the critical boot phase.
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When soft interrupt actions are called, they are passed a pointer to the
struct softirq action which contains the action's function pointer.
This pointer isn't useful, as the action callback already knows what
function it is. And since each callback handles a specific soft interrupt,
the callback also knows which soft interrupt number is running.
No soft interrupt action callback actually uses this parameter, so remove
it from the function pointer signature. This clarifies that soft interrupt
actions are global routines and makes it slightly cheaper to call them.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/all/20240815171549.3260003-1-csander@purestorage.com
|
|
FFA_MSG_SEND_DIRECT_{REQ,RESP} supported only x3-x7 to pass implementation
defined values as part of the message. This may not be sufficient sometimes
and also it would be good to use all the registers supported by SMCCC v1.2
(x0-x17) for such register based communication.
Also another limitation with the FFA_MSG_SEND_DIRECT_{REQ,RESP} is the
ability to target a specific service within the partition based on it's
UUID.
In order to address both of the above limitation, FF-A v1.2 introduced
FFA_MSG_SEND_DIRECT_{REQ,RESP}2 which has the ability to target the
message to a specific service based on its UUID within a partition as
well as utilise all the available registers(x4-x17 specifically) for
the communication.
This change adds support for FFA_MSG_SEND_DIRECT_REQ2 and
FFA_MSG_SEND_DIRECT_RESP2.
Message-Id: <20240820-ffa_v1-2-v2-5-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Arm Firmware Framework for A-profile(FFA) v1.2 introduces register based
discovery mechanism and direct messaging extensions that enables to target
specific UUID within a partition.
Let us add all the newly supported FF-A function IDs in the spec.
Also update to the error values and associated handling.
Message-Id: <20240820-ffa_v1-2-v2-2-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
iounmap() on x86 occasionally fails to unmap because the provided valid
ioremap address is not below high_memory. It turned out that this
happens due to KASLR.
KASLR uses the full address space between PAGE_OFFSET and vaddr_end to
randomize the starting points of the direct map, vmalloc and vmemmap
regions. It thereby limits the size of the direct map by using the
installed memory size plus an extra configurable margin for hot-plug
memory. This limitation is done to gain more randomization space
because otherwise only the holes between the direct map, vmalloc,
vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel, so
the memory hot-plug and resource management related code paths still
operate under the assumption that the available address space can be
determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of the
direct map and if unlucky this address is in the vmalloc space, which
causes high_memory to become greater than VMALLOC_START and consequently
causes iounmap() to fail for valid ioremap addresses.
MAX_PHYSMEM_BITS cannot be changed for that because the randomization
does not align with address bit boundaries and there are other places
which actually require to know the maximum number of address bits. All
remaining usage sites of MAX_PHYSMEM_BITS have been analyzed and found
to be correct.
Cure this by exposing the end of the direct map via PHYSMEM_END and use
that for the memory hot-plug and resource management related places
instead of relying on MAX_PHYSMEM_BITS. In the KASLR case PHYSMEM_END
maps to a variable which is initialized by the KASLR initialization and
otherwise it is based on MAX_PHYSMEM_BITS as before.
To prevent future hickups add a check into add_pages() to catch callers
trying to add memory above PHYSMEM_END.
Fixes: 0483e1fa6e09 ("x86/mm: Implement ASLR for kernel memory regions")
Reported-by: Max Ramanouski <max8rr8@gmail.com>
Reported-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-By: Max Ramanouski <max8rr8@gmail.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed6soy3z.ffs@tglx
|
|
Add the devres-enabled version of dev_pm_domain_attach|detach_list.
If client drivers use devm_pm_domain_attach_list() to attach the PM domains,
devm_pm_domain_detach_list() will be invoked implicitly during remove phase.
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Link: https://lore.kernel.org/r/1724063350-11993-2-git-send-email-quic_dikshita@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add an skb helper function to copy a range of bytes from within
an existing skb_seq_state.
Signed-off-by: Christian Hopps <chopps@labn.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Fix htmldocs build warning introduced by ec0a7d44b358 ("workqueue: Add
interface for user-defined workqueue lockdep map").
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Matthew Brost <matthew.brost@intel.com>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Intel new platforms can have up to 5 SoundWire links.
This series does not apply to SoundWire tree due to recent changes in
machine driver. Can we go via ASoC tree with Vinod's Acked-by tag?
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Do not block printk on non-panic CPUs when they are dumping
backtraces
* tag 'printk-for-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Allow cpu backtraces to be written into ringbuffer during panic
|
|
Function bdev_get_queue() must not return NULL, so drop the check in
bdev_write_zeroes_sectors().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Link: https://lore.kernel.org/r/20240815163228.216051-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
In the function percpu_rwsem_release, the parameter `read`
is unused, so remove it.
Signed-off-by: Wang Long <w@laoqinren.net>
Link: https://lore.kernel.org/r/20240802091901.2546797-1-w@laoqinren.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When deactivating any type of superblock, it had to wait for the in-flight
wb switches to be completed. wb switches are executed in inode_switch_wbs_work_fn()
which needs to acquire the wb_switch_rwsem and races against sync_inodes_sb().
If there are too much dirty data in the superblock, the waiting time may increase
significantly.
For superblocks without cgroup writeback such as tmpfs, they have nothing to
do with the wb swithes, so the flushing can be avoided.
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Link: https://lore.kernel.org/r/20240726030525.180330-1-haifeng.xu@shopee.com
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Intel platforms have enabled 4 links since the beginning, newer
platforms now have 5 links. Update the definition accordingly.
This patch will have no effect on older platforms where the number of
links was hard-coded. A follow-up patch will add a dynamic check that
the ACPI-reported information is aligned with hardware capabilities on
newer platforms.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240819005548.5867-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add
a probe-time check to make sure the ACPI-reported information with
_DSD properties is aligned with hardware capabilities reported in the
SoundWire LCAP register.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240819005548.5867-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
