| Age | Commit message (Collapse) | Author |
|---|
|
Commit 71024cb4a0bf ("frontswap: remove frontswap_tmem_exclusive_gets")
removed support for exclusive loads from frontswap as it was not used.
Bring back exclusive loads support to frontswap by adding an "exclusive"
output parameter to frontswap_ops->load.
On the zswap side, add a module parameter to enable/disable exclusive
loads, and a config option to control the boot default value. Refactor
zswap entry invalidation in zswap_frontswap_invalidate_page() into
zswap_invalidate_entry() to reuse it in zswap_frontswap_load() if
exclusive loads are enabled.
With exclusive loads, we avoid having two copies of the same page in
memory (compressed & uncompressed) after faulting it in from zswap. On
the other hand, if the page is to be reclaimed again without being
dirtied, it will be re-compressed. Compression is not usually slow, and a
page that was just faulted in is less likely to be reclaimed again soon.
Link: https://lkml.kernel.org/r/20230607195143.1473802-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Yu Zhao <yuzhao@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
managed pages has already been set to 0 in free_area_init_core_hotplug(),
via zone_init_internals() on each zone. It's pointless to reset again.
Furthermore, reset_node_managed_pages() no longer needs to be exposed
outside of mm/memblock.c. Remove declaration in include/linux/memblock.h
and define it as static.
In addtion to this, the only caller of reset_node_managed_pages() is
reset_all_zones_managed_pages(), which is annotated with __init, so it
should be safe to also mark reset_node_managed_pages() as __init.
Link: https://lkml.kernel.org/r/20230607024548.1240-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As the ramfs-based tmpfs uses ramfs_init_fs_context() for the
init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb()
to free it and avoid a memory leak.
Link: https://lkml.kernel.org/r/20230607161523.2876433-1-roberto.sassu@huaweicloud.com
Fixes: c3b1b1cbf002 ("ramfs: add support for "mode=" mount option")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These parameters ms and map_offset are not used in
sparse_remove_section(), so remove them.
The __remove_section() is only called by __remove_pages(), remove it. And
put the WARN_ON_ONCE() in sparse_remove_section().
Link: https://lkml.kernel.org/r/20230607023952.2247489-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add __meminit to kswapd_run() and kswapd_stop() to ensure they're default
to __init when memory hotplug is not enabled.
Link: https://lkml.kernel.org/r/20230606121813.242163-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There's only declaration left in the header file. Remove it.
Link: https://lkml.kernel.org/r/20230603142513.787000-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
And remove the incorrect header comments.
[akpm@linux-foundation.org: s/lower/first/, s/upper/last/, per Mike]
Link: https://lkml.kernel.org/r/20230519111652.40658-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Within each nfs_server sysfs tree, add an entry named "shutdown". Writing
1 to this file will set the cl_shutdown bit on the rpc_clnt structs
associated with that mount. If cl_shutdown is set, the task scheduler
immediately returns -EIO for new tasks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
After lockd is started, add a symlink for lockd's rpc_client under
NFS' superblock sysfs.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
For the general and state management nfs_client under each mount, create
symlinks to their respective rpc_client sysfs entries.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Create a sysfs directory for each mount that corresponds to the mount's
nfs_server struct. As the mount is being constructed, use the name
"server-n", but rename it to the "MAJOR:MINOR" of the mount after assigning
a device_id. The rename approach allows us to populate the mount's directory
with links to the various rpc_client objects during the mount's
construction. The naming convention (MAJOR:MINOR) can be used to reference
a particular NFS mount's sysfs tree.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The new field is used to match struct nfs_clients that have the same
TLS policy setting.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Use the new TLS handshake API to enable the SunRPC client code
to request a TLS handshake. This implements support for RFC 9289,
only on TCP sockets.
Upper layers such as NFS use RPC-with-TLS to protect in-transit
traffic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The RPC header parser doesn't recognize TLS handshake traffic, so it
will close the connection prematurely with an error. To avoid that,
shunt the transport's data_ready callback when there is a TLS
handshake in progress.
The XPRT_SOCK_IGNORE_RECV flag will be toggled by code added in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The new authentication flavor is used only to discover peer support
for RPC-over-TLS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Overlayfs creates the real underlying files with fake f_path, whose
f_inode is on the underlying fs and f_path on overlayfs.
Those real files were open with FMODE_NONOTIFY, because fsnotify code was
not prapared to handle fsnotify hooks on files with fake path correctly
and fanotify would report unexpected event->fd with fake overlayfs path,
when the underlying fs was being watched.
Teach fsnotify to handle events on the real files, and do not set real
files to FMODE_NONOTIFY to allow operations on real file (e.g. open,
access, modify, close) to generate async and permission events.
Because fsnotify does not have notifications on address space
operations, we do not need to worry about ->vm_file not reporting
events to a watched overlayfs when users are accessing a mapped
overlayfs file.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230615112229.2143178-6-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add an initial set of policies along with fields for upper layers to
pass the requested policy down to the transport layer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Overlayfs uses open_with_fake_path() to allocate internal kernel files,
with a "fake" path - whose f_path is not on the same fs as f_inode.
Allocate a container struct backing_file for those internal files, that
is used to hold the "fake" ovl path along with the real path.
backing_file_real_path() can be used to access the stored real path.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230615112229.2143178-5-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
cachefiles uses kernel_open_tmpfile() to open kernel internal tmpfile
without accounting for nr_files.
cachefiles uses open_with_fake_path() for the same reason without the
need for a fake path.
Fork open_with_fake_path() to kernel_file_open() which only does the
noaccount part and use it in cachefiles.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230615112229.2143178-3-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Otherwise, `stat` will report a stale value to users.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Overlayfs and cachefiles use vfs_open_tmpfile() to open a tmpfile
without accounting for nr_files.
Rename this helper to kernel_tmpfile_open() to better reflect this
helper is used for kernel internal users.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230615112229.2143178-2-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
L3_OUT and L4_OUT Bit fields range from Bit 0:4 and thus the
mask should be 0x1F instead of 0x0F.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20230614125240.3946519-1-t.remmet@phytec.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It seems there is no driver that requires custom IRQ chip
domain options. Drop the member and respective code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Up until commit 6a45b0e2589f ("gpiolib: Introduce
gpiochip_irqchip_add_domain()") all irq_domains were allocated
by gpiolib itself and thus gpiolib also takes care of freeing it.
With gpiochip_irqchip_add_domain() a user of gpiolib can associate an
irq_domain with the gpio_chip. This irq_domain is not managed by
gpiolib and therefore must not be freed by gpiolib.
Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Check that all the NSS in the EHT basic MCS/NSS set
are actually supported, otherwise disable EHT for the
connection.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.737827c906c9.I0c11a3cd46ab4dcb774c11a5bbc30aecfb6fce11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Update the MLE STA reconfig sub-type to 802.11be D3.0
format, which includes the operation update field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.2e1383b31f07.I8055a111c8fcf22e833e60f5587a4d8d21caca5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In ieee80211_mle_sta_prof_size_ok(), the presence
checks aren't ordered by field order, so that's a
bit confusing. Reorder them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.fdbf17320a37.I517cf27fdc3f6e5d6a2615182da47ba4bdf14039@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for handling link removal indicated by the
Reconfiguration Multi-Link element.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.d8a046dc0c1a.I4dcf794da2a2d9f4e5f63a4b32158075d27c0660@changeid
[use cfg80211_links_removed() API instead]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Make the data access a bit nicer overall by using structs. There is a
small change here to also accept a TBTT information length of eight
bytes as we do not require the 20 MHz PSD information.
This also fixes a bug reading the short SSID on big endian machines.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.4c3f8901c1bc.Ic3e94fd6e1bccff7948a252ad3bb87e322690a17@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The TBTT information can have various lengths with different elements
thare are present. Add definitions for the two types that we are
interested in (i.e. the ones that contain the BSSID).
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.2a6f8766a3ec.Ic962e28492212cc8ee1eb602b8f07a4ea172fc4a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the definitions necessary to parse the MLD parameters
included in an RNR element.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.9999842237c0.I80f00a90cb4e43071432b4158f206c73ba799618@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Default values are defined for the information included in the Medium
Synchronization Delay Information subfield. The spec says to
initialize the values to these defaults and only change them when
included.
Return the default value instead of zero so that the defaults are
used when the field is not included in the association response.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.a7725bef3795.I2d3528cf4af021c5b37f97fbe64ae9116ce9bef1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The helper functions to retrieve the EML capabilities and medium
synchronization delay both assume that the type is correct. Instead of
assuming the length is correct and still checking the type, add a new
helper to check both and don't do any verification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.1b50e7a3b3cf.I9385514d8eb6d6d3c82479a6fa732ef65313e554@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The common information length is found in the first octet of the common
information.
Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.3c7ed4817338.I42ef706cb827b4dade6e4ffbb6e7f341eaccd398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Rename it to ieee80211_mle_basic_sta_prof_size_ok() as it
validates the size of the station profile included in
Basic Multi-Link element.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.9bdfd263974f.I7bebd26894f33716e93cc7da576ef3215e0ba727@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The TBTT information field type must be zero. This is only changed in
the 802.11be draft specification where the value 1 is used to indicate
that only the MLD parameters are included.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.7865606ffe94.I7ff28afb875d1b4c39acd497df8490a7d3628e3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point
set_handle_irq() needs to be called to handle system-wide
interrupts.
For all DT-enabled boards, this call happens down in the
drivers/irqchip subsystem, after locating the target irqchip
driver from the device tree.
We still have a few instances of the boardfiles with machine
descriptors passing a machine-specific .handle_irq() to the
ARM kernel core.
Get rid of this by letting the few remaining machines consistently
call set_handle_irq() from the end of the .init_irq() callback
instead and diet down one member from the machine descriptor.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
'core' and 'x86/amd' into next
|
|
The VIA fbdev exposes a custom GPIO chip for its GPIOs, these
are in turn looked up the camera driver using a custom API.
Drop the custom API, provide a look-up table and convert to
GPIO descriptors. Note proper polarity on the RESET line.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct hdmi_avi_infoframe'
from 68 to 60 bytes.
It saves a few bytes of memory and is more cache-line friendly.
This also reduces the union hdmi_infoframe the same way.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The sys_ni_posix_timers() definition causes a warning when the declaration
is missing, so this needs to be added along with the normal syscalls,
outside of the #ifdef.
kernel/time/posix-stubs.c:26:17: error: no previous prototype for 'sys_ni_posix_timers' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230607142925.3126422-1-arnd@kernel.org
|
|
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
CPU0 CPU1
posix_timer_add()
start = sig->posix_timer_id;
lock(hash_lock);
... posix_timer_add()
if (++sig->posix_timer_id < 0)
start = sig->posix_timer_id;
sig->posix_timer_id = 0;
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock.
Reported-by: syzbot+5c54bd3eb218bb595aa9@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87bkhzdn6g.ffs@tglx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2023-06-16
1) Added a new event handler to firmware sync reset, which is used to
support firmware sync reset flow on smart NIC. Adding this new stage to
the flow enables the firmware to ensure host PFs unload before ECPFs
unload, to avoid race of PFs recovery.
2) Debugfs for mlx5 eswitch bridge offloads
3) Added two new counters for vport stats
4) Minor Fixups and cleanups for net-next branch
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Avoid deadlocks on resume from sleep by delaying scsi rescan until
the scsi device is also fully resumed.
* tag 'ata-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-scsi: Avoid deadlock on rescan after device resume
|
|
Per-VMA locking allows us to lock a struct vm_area_struct without
taking the process-wide mmap lock in read mode.
Consider a process workload where the mmap lock is taken constantly in
write mode. In this scenario, all zerocopy receives are periodically
blocked during that period of time - though in principle, the memory
ranges being used by TCP are not touched by the operations that need
the mmap write lock. This results in performance degradation.
Now consider another workload where the mmap lock is never taken in
write mode, but there are many TCP connections using receive zerocopy
that are concurrently receiving. These connections all take the mmap
lock in read mode, but this does induce a lot of contention and atomic
ops for this process-wide lock. This results in additional CPU
overhead caused by contending on the cache line for this lock.
However, with per-vma locking, both of these problems can be avoided.
As a test, I ran an RPC-style request/response workload with 4KB
payloads and receive zerocopy enabled, with 100 simultaneous TCP
connections. I measured perf cycles within the
find_tcp_vma/mmap_read_lock/mmap_read_unlock codepath, with and
without per-vma locking enabled.
When using process-wide mmap semaphore read locking, about 1% of
measured perf cycles were within this path. With per-VMA locking, this
value dropped to about 0.45%.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is part of the effort to remove the empty element at the end of
ctl_table structs. "child" was a deprecated elem in this struct and was
being used to differentiate between two types of ctl_tables: "normal"
and "permanently emtpy".
What changed?:
* Replace "child" with an enumeration that will have two values: the
default (0) and the permanently empty (1). The latter is left at zero
so when struct ctl_table is created with kzalloc or in a local
context, it will have the zero value by default. We document the
new enum with kdoc.
* Remove the "empty child" check from sysctl_check_table
* Remove count_subheaders function as there is no longer a need to
calculate how many headers there are for every child
* Remove the recursive call to unregister_sysctl_table as there is no
need to traverse down the child tree any longer
* Add a new SYSCTL_PERM_EMPTY_DIR binary flag
* Remove the last remanence of child from partport/procfs.c
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().
However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.
Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Joe Breuer <linux-kernel@jmbreuer.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>
|
|
These commits
a494aef23dfc ("PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg")
2c6ba4216844 ("PCI: hv: Enable PCI pass-thru devices in Confidential VMs")
update the Hyper-V virtual PCI driver to use the hyperv_pcpu_input_arg
because that memory will be correctly marked as decrypted or encrypted
for all VM types (CoCo or normal). But problems ensue when CPUs in the
VM go online or offline after virtual PCI devices have been configured.
When a CPU is brought online, the hyperv_pcpu_input_arg for that CPU is
initialized by hv_cpu_init() running under state CPUHP_AP_ONLINE_DYN.
But this state occurs after state CPUHP_AP_IRQ_AFFINITY_ONLINE, which
may call the virtual PCI driver and fault trying to use the as yet
uninitialized hyperv_pcpu_input_arg. A similar problem occurs in a CoCo
VM if the MMIO read and write hypercalls are used from state
CPUHP_AP_IRQ_AFFINITY_ONLINE.
When a CPU is taken offline, IRQs may be reassigned in state
CPUHP_TEARDOWN_CPU. Again, the virtual PCI driver may fault trying to
use the hyperv_pcpu_input_arg that has already been freed by a
higher state.
Fix the onlining problem by adding state CPUHP_AP_HYPERV_ONLINE
immediately after CPUHP_AP_ONLINE_IDLE (similar to CPUHP_AP_KVM_ONLINE)
and before CPUHP_AP_IRQ_AFFINITY_ONLINE. Use this new state for
Hyper-V initialization so that hyperv_pcpu_input_arg is allocated
early enough.
Fix the offlining problem by not freeing hyperv_pcpu_input_arg when
a CPU goes offline. Retain the allocated memory, and reuse it if
the CPU comes back online later.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Since no in-tree driver supports it, sht3x_platform_data has been
removed and the relevant properties have been moved to sht3x_data.
Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB626126FB7226D5AF341197449258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
