| Age | Commit message (Collapse) | Author |
|---|
|
Create auxiliary devices under new virtual bus. This will replace
the custom-made mlx5 ->add()/->remove() interfaces and next patches
will fill the missing callback and remove the old interface logic.
The attachment of auxiliary drivers to the devices is possible in
1-to-1 manner only and it requires us to create device for every protocol,
so that device (module) will be able to connect to it.
System with 2 IB and 1 RoCE cards:
[leonro@vm ~]$ lspci |grep nox
00:09.0 Ethernet controller: Mellanox Technologies MT27800 Family [ConnectX-5]
00:0a.0 Ethernet controller: Mellanox Technologies MT28908 Family [ConnectX-6]
00:0b.0 Ethernet controller: Mellanox Technologies MT2910 Family [ConnectX-7]
[leonro@vm ~]$ ls -l /sys/bus/auxiliary/devices/
mlx5_core.eth.2 -> ../../../devices/pci0000:00/0000:00:0b.0/mlx5_core.eth.2
mlx5_core.rdma.0 -> ../../../devices/pci0000:00/0000:00:09.0/mlx5_core.rdma.0
mlx5_core.rdma.1 -> ../../../devices/pci0000:00/0000:00:0a.0/mlx5_core.rdma.1
mlx5_core.rdma.2 -> ../../../devices/pci0000:00/0000:00:0b.0/mlx5_core.rdma.2
mlx5_core.vdpa.1 -> ../../../devices/pci0000:00/0000:00:0a.0/mlx5_core.vdpa.1
mlx5_core.vdpa.2 -> ../../../devices/pci0000:00/0000:00:0b.0/mlx5_core.vdpa.2
[leonro@vm ~]$ rdma dev
0: ibp0s9: node_type ca fw 4.6.9999 node_guid 5254:00c0:fe12:3455 sys_image_guid 5254:00c0:fe12:3455
1: ibp0s10: node_type ca fw 4.6.9999 node_guid 5254:00c0:fe12:3456 sys_image_guid 5254:00c0:fe12:3456
2: rdmap0s11: node_type ca fw 4.6.9999 node_guid 5254:00c0:fe12:3457 sys_image_guid 5254:00c0:fe12:3457
System with RoCE SR-IOV card with 4 VFs:
[leonro@vm ~]$ lspci |grep nox
01:00.0 Ethernet controller: Mellanox Technologies MT28908 Family [ConnectX-6]
01:00.1 Ethernet controller: Mellanox Technologies MT28908 Family [ConnectX-6 Virtual Function]
01:00.2 Ethernet controller: Mellanox Technologies MT28908 Family [ConnectX-6 Virtual Function]
01:00.3 Ethernet controller: Mellanox Technologies MT28908 Family [ConnectX-6 Virtual Function]
01:00.4 Ethernet controller: Mellanox Technologies MT28908 Family [ConnectX-6 Virtual Function]
[leonro@vm ~]$ ls -l /sys/bus/auxiliary/devices/
mlx5_core.eth.0 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.0/mlx5_core.eth.0
mlx5_core.eth.1 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.1/mlx5_core.eth.1
mlx5_core.eth.2 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.2/mlx5_core.eth.2
mlx5_core.eth.3 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.3/mlx5_core.eth.3
mlx5_core.eth.4 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.4/mlx5_core.eth.4
mlx5_core.rdma.0 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.0/mlx5_core.rdma.0
mlx5_core.rdma.1 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.1/mlx5_core.rdma.1
mlx5_core.rdma.2 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.2/mlx5_core.rdma.2
mlx5_core.rdma.3 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.3/mlx5_core.rdma.3
mlx5_core.rdma.4 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.4/mlx5_core.rdma.4
mlx5_core.vdpa.1 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.1/mlx5_core.vdpa.1
mlx5_core.vdpa.2 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.2/mlx5_core.vdpa.2
mlx5_core.vdpa.3 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.3/mlx5_core.vdpa.3
mlx5_core.vdpa.4 -> ../../../devices/pci0000:00/0000:00:09.0/0000:01:00.4/mlx5_core.vdpa.4
[leonro@vm ~]$ rdma dev
0: rocep1s0f0: node_type ca fw 4.6.9999 node_guid 5254:00c0:fe12:3455 sys_image_guid 5254:00c0:fe12:3455
1: rocep1s0f0v0: node_type ca fw 4.6.9999 node_guid 0000:0000:0000:0000 sys_image_guid 5254:00c0:fe12:3456
2: rocep1s0f0v1: node_type ca fw 4.6.9999 node_guid 0000:0000:0000:0000 sys_image_guid 5254:00c0:fe12:3457
3: rocep1s0f0v2: node_type ca fw 4.6.9999 node_guid 0000:0000:0000:0000 sys_image_guid 5254:00c0:fe12:3458
4: rocep1s0f0v3: node_type ca fw 4.6.9999 node_guid 0000:0000:0000:0000 sys_image_guid 5254:00c0:fe12:3459
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Move mlx5_vdpa IFC header file to the general include folder, so
mlx5_core will be able to reuse it to check if VDPA is supported
prior to creating an auxiliary device.
As part of this move, update the header file name to mlx5 general
naming scheme.
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Remove exposed driver version as it was done in other drivers,
so module version will work correctly by displaying the kernel
version for which it is compiled.
And move mlx5_core module name to general include, so auxiliary drivers
will be able to use it as a basis for a name in their device ID tables.
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into mlx5-next
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'auxbus-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: auxiliary bus: minor coding style tweaks
driver core: auxiliary bus: make remove function return void
driver core: auxiliary bus: move slab.h from include file
Add auxiliary bus support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into driver-core-next
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For some reason, the original aux bus patch had some really long lines
in a few places, probably due to it being a very long-lived patch in
development by many different people. Fix that up so that the two files
all have the same length lines and function formatting styles.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8oiSFTpYHw1xE/o@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There's an effort to move the remove() callback in the driver core to
not return an int, as nothing can be done if this function fails. To
make that effort easier, make the aux bus remove function void to start
with so that no users have to be changed sometime in the future.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8ohB1ks1NK7kPop@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No need to include slab.h in include/linux/auxiliary_bus.h, as it is not
needed there. Move it to drivers/base/auxiliary.c instead.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8og8xi3WkoYXet9@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set max_busy_timeouts for variants known to support the TOPxx bits in
the SD_OPTION register. The timeout mechanism was running in the
background but not yet properly handled in the driver. So, let the MMC
core know when to not use R1B to avoid unhandled timeouts.
My datasheets for older variants (tmio_mmc.c) suggest that they support
it, too. However, actual bit descriptions are lacking, so I chose an
opt-in approach.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201125213001.15003-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver.
It enables drivers to create an auxiliary_device and bind an
auxiliary_driver to it.
The bus supports probe/remove shutdown and suspend/resume callbacks.
Each auxiliary_device has a unique string based id; driver binds to
an auxiliary_device based on this id through the bus.
Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Co-developed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kvmarm-master/queue
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Make it possible to retrieve a copy of the psci_0_1_function_ids struct.
This is useful for KVM if it is configured to intercept host's PSCI SMCs.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201202184122.26046-7-dbrazdil@google.com
|
|
Add ability for user-space programs to specify non-vmlinux BTF when attaching
BTF-powered BPF programs: raw_tp, fentry/fexit/fmod_ret, LSM, etc. For this,
attach_prog_fd (now with the alias name attach_btf_obj_fd) should specify FD
of a module or vmlinux BTF object. For backwards compatibility reasons,
0 denotes vmlinux BTF. Only kernel BTF (vmlinux or module) can be specified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-11-andrii@kernel.org
|
|
Remove a permeating assumption thoughout BPF verifier of vmlinux BTF. Instead,
wherever BTF type IDs are involved, also track the instance of struct btf that
goes along with the type ID. This allows to gradually add support for kernel
module BTFs and using/tracking module types across BPF helper calls and
registers.
This patch also renames btf_id() function to btf_obj_id() to minimize naming
clash with using btf_id to denote BTF *type* ID, rather than BTF *object*'s ID.
Also, altough btf_vmlinux can't get destructed and thus doesn't need
refcounting, module BTFs need that, so apply BTF refcounting universally when
BPF program is using BTF-powered attachment (tp_btf, fentry/fexit, etc). This
makes for simpler clean up code.
Now that BTF type ID is not enough to uniquely identify a BTF type, extend BPF
trampoline key to include BTF object ID. To differentiate that from target
program BPF ID, set 31st bit of type ID. BTF type IDs (at least currently) are
not allowed to take full 32 bits, so there is no danger of confusing that bit
with a valid BTF type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-10-andrii@kernel.org
|
|
Conflicts:
drivers/net/ethernet/ibm/ibmvnic.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While performing some destructive tests with vfio-ccw, where the
paths to a device are forcible removed and thus the device itself
is unreachable, it is rather easy to end up in an endless loop in
vfio_del_group_dev() due to the lack of a request callback for the
associated device.
In this example, one MDEV (77c) is used by a guest, while another
(77b) is not. The symptom is that the iommu is detached from the
mdev for 77b, but not 77c, until that guest is shutdown:
[ 238.794867] vfio_ccw 0.0.077b: MDEV: Unregistering
[ 238.794996] vfio_mdev 11f2d2bc-4083-431d-a023-eff72715c4f0: Removing from iommu group 2
[ 238.795001] vfio_mdev 11f2d2bc-4083-431d-a023-eff72715c4f0: MDEV: detaching iommu
[ 238.795036] vfio_ccw 0.0.077c: MDEV: Unregistering
...silence...
Let's wire in the request call back to the mdev device, so that a
device being physically removed from the host can be (gracefully?)
handled by the parent device at the time the device is removed.
Add a message when registering the device if a driver doesn't
provide this callback, so a clue is given that this same loop
may be encountered in a similar situation, and a message when
this occurs instead of the awkward silence noted above.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc7, including fixes from bpf, netfilter,
wireless drivers, wireless mesh and can.
Current release - regressions:
- mt76: usb: fix crash on device removal
Current release - always broken:
- xsk: Fix umem cleanup from wrong context in socket destruct
Previous release - regressions:
- net: ip6_gre: set dev->hard_header_len when using header_ops
- ipv4: Fix TOS mask in inet_rtm_getroute()
- net, xsk: Avoid taking multiple skbuff references
Previous release - always broken:
- net/x25: prevent a couple of overflows
- netfilter: ipset: prevent uninit-value in hash_ip6_add
- geneve: pull IP header before ECN decapsulation
- mpls: ensure LSE is pullable in TC and openvswitch paths
- vxlan: respect needed_headroom of lower device
- batman-adv: Consider fragmentation for needed packet headroom
- can: drivers: don't count arbitration loss as an error
- netfilter: bridge: reset skb->pkt_type after POST_ROUTING traversal
- inet_ecn: Fix endianness of checksum update when setting ECT(1)
- ibmvnic: fix various corner cases around reset handling
- net/mlx5: fix rejecting unsupported Connect-X6DX SW steering
- net/mlx5: Enforce HW TX csum offload with kTLS"
* tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering
net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
net/mlx5: Fix wrong address reclaim when command interface is down
net/sched: act_mpls: ensure LSE is pullable before reading it
net: openvswitch: ensure LSE is pullable before reading it
net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
net: mvpp2: Fix error return code in mvpp2_open()
chelsio/chtls: fix a double free in chtls_setkey()
rtw88: debug: Fix uninitialized memory in debugfs code
vxlan: fix error return code in __vxlan_dev_create()
net: pasemi: fix error return code in pasemi_mac_open()
cxgb3: fix error return code in t3_sge_alloc_qset()
net/x25: prevent a couple of overflows
dpaa_eth: copy timestamp fields to new skb in A-050385 workaround
net: ip6_gre: set dev->hard_header_len when using header_ops
mt76: usb: fix crash on device removal
iwlwifi: pcie: add some missing entries for AX210
iwlwifi: pcie: invert values of NO_160 device config entries
iwlwifi: pcie: add one missing entry for AX210
...
|
|
A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.
However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As we no longer support a try again if we cannot reenable the trigger
rename the function to reflect this. Also we don't do anything with
the value returned so stop it returning anything. For the few drivers
that didn't already print an error message in this patch, add such
a print.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Christian Oder <me@myself5.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nishant Malpani <nish.malpani25@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Link: https://lore.kernel.org/r/20200920132548.196452-3-jic23@kernel.org
|
|
Use a heap allocated memory for the SPI transfer buffer. Using stack memory
can corrupt stack memory when using DMA on some systems.
This change moves the buffer from the stack of the trigger handler call to
the heap of the buffer of the state struct. The size increases takes into
account the alignment for the timestamp, which is 8 bytes.
The 'data' buffer is split into 'tx_buf' and 'rx_buf', to make a clearer
separation of which part of the buffer should be used for TX & RX.
Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201124123807.19717-1-alexandru.ardelean@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.
Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Background:
Broadcast and multicast packages are enqueued for later processing.
This queue was previously hardcoded to 1000.
This proved insufficient for handling very high packet rates.
This resulted in packet drops for multicast.
While at the same time unicast worked fine.
The change:
This patch make the queue length adjustable to accommodate
for environments with very high multicast packet rate.
But still keeps the default value of 1000 unless specified.
The queue length is specified as a request per macvlan
using the IFLA_MACVLAN_BC_QUEUE_LEN parameter.
The actual used queue length will then be the maximum of
any macvlan connected to the same port. The actual used
queue length for the port can be retrieved (read only)
by the IFLA_MACVLAN_BC_QUEUE_LEN_USED parameter for verification.
This will be followed up by a patch to iproute2
in order to adjust the parameter from userspace.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Link: https://lore.kernel.org/r/dd4673b2-7eab-edda-6815-85c67ce87f63@paneda.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement 'unsafe' version of put_compat_sigset()
For the bigendian, use unsafe_put_user() directly
to avoid intermediate copy through the stack.
For the littleendian, use a straight unsafe_copy_to_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/537c7082ee309a0bb9c67a50c5d9dd929aedb82d.1597770847.git.christophe.leroy@csgroup.eu
|
|
We used LockDoc to derive locking rules for each member
of struct transaction_t.
Based on those results, we extended the existing documentation
by more members of struct transaction_t, and updated the existing
documentation.
Link: https://lore.kernel.org/r/10cfbef1-994c-c604-f8a6-b1042fcc622f@tu-dortmund.de
Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The handle_inode_event() interface was added as (quoting comment):
"a simple variant of handle_event() for groups that only have inode
marks and don't have ignore mask".
In other words, all backends except fanotify. The inotify backend
also falls under this category, but because it required extra arguments
it was left out of the initial pass of backends conversion to the
simple interface.
This results in code duplication between the generic helper
fsnotify_handle_event() and the inotify_handle_event() callback
which also happen to be buggy code.
Generalize the handle_inode_event() arguments and add the check for
FS_EXCL_UNLINK flag to the generic helper, so inotify backend could
be converted to use the simple interface.
Link: https://lore.kernel.org/r/20201202120713.702387-2-amir73il@gmail.com
CC: stable@vger.kernel.org
Fixes: b9a1b9772509 ("fsnotify: create method handle_inode_event() in fsnotify_operations")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The kernel-doc markup is wrong: it is asking the tool to document
struct refcount_struct, instead of documenting typedef refcount_t.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/afb9bb1e675bf5f72a34a55d780779d7d5916b4c.1606823973.git.mchehab+huawei@kernel.org
|
|
Changeset cd8084f91c02 ("locking/lockdep: Apply crossrelease to completions")
added a CONFIG_LOCKDEP_COMPLETE (that was later renamed to
CONFIG_LOCKDEP_COMPLETIONS).
Such changeset renamed the init_completion, and add a macro
that would either run a modified version or the original code.
However, such code reported too many false positives. So, it
ended being dropped later on by
changeset e966eaeeb623 ("locking/lockdep: Remove the cross-release locking checks").
Yet, the define remained there as just:
#define init_completion(x) __init_completion(x)
Get rid of the define, and return __init_completion() function
to its original name.
Fixes: e966eaeeb623 ("locking/lockdep: Remove the cross-release locking checks")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/e657bfc533545c185b1c3c55926a449ead56a88b.1606823973.git.mchehab+huawei@kernel.org
|
|
More consistent naming should make it easier to untangle the _Generic
token pasting maze called __seqprop().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201110115358.GE2594@hirez.programming.kicks-ass.net
|
|
When building with W=2, there is a flood of warnings about the seqlock
macros shadowing local variables:
19806 linux/seqlock.h:331:11: warning: declaration of 'seq' shadows a previous local [-Wshadow]
48 linux/seqlock.h:348:11: warning: declaration of 'seq' shadows a previous local [-Wshadow]
8 linux/seqlock.h:379:11: warning: declaration of 'seq' shadows a previous local [-Wshadow]
Prefix the local variables to make the warning useful elsewhere again.
Fixes: 52ac39e5db51 ("seqlock: seqcount_t: Implement all read APIs as statement expressions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201026165044.3722931-1-arnd@kernel.org
|
|
A number of architectures have non-pagetable aligned huge/large pages.
For such architectures a leaf can actually be part of a larger entry.
Provide generic helpers to determine the size of a page-table leaf.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/20201126121121.102580109@infradead.org
|
|
In order to write another lockless page-table walker, we need
gup_get_pte() exposed. While doing that, rename it to
ptep_get_lockless() to match the existing ptep_get() naming.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201126121121.036370527@infradead.org
|
|
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Userspace might want to implement a policy to temporarily disregard input
from certain devices, including not treating them as wakeup sources.
An example use case is a laptop, whose keyboard can be folded under the
screen to create tablet-like experience. The user then must hold the laptop
in such a way that it is difficult to avoid pressing the keyboard keys. It
is therefore desirable to temporarily disregard input from the keyboard,
until it is folded back. This obviously is a policy which should be kept
out of the kernel, but the kernel must provide suitable means to implement
such a policy.
This patch adds a sysfs interface for exactly this purpose.
To implement the said interface it adds an "inhibited" property to struct
input_dev, and effectively creates four states a device can be in: closed
uninhibited, closed inhibited, open uninhibited, open inhibited. It also
defers calling driver's ->open() and ->close() to until they are actually
needed, e.g. it makes no sense to prepare the underlying device for
generating events (->open()) if the device is inhibited.
uninhibit
closed <------------ closed
uninhibited ------------> inhibited
| ^ inhibit | ^
1st | | 1st | |
open | | open | |
| | | |
| | last | | last
| | close | | close
v | uninhibit v |
open <------------ open
uninhibited ------------> inhibited
The top inhibit/uninhibit transition happens when users == 0.
The bottom inhibit/uninhibit transition happens when users > 0.
The left open/close transition happens when !inhibited.
The right open/close transition happens when inhibited.
Due to all transitions being serialized with dev->mutex, it is impossible
to have "diagonal" transitions between closed uninhibited and open
inhibited or between open uninhibited and closed inhibited.
No new callbacks are added to drivers, because their open() and close()
serve exactly the purpose to tell the driver to start/stop providing
events to the input core. Consequently, open() and close() - if provided
- are called in both inhibit and uninhibit paths.
Signed-off-by: Patrik Fimml <patrikf@chromium.org>
Co-developed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://lore.kernel.org/r/20200608112211.12125-8-andrzej.p@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
A helper function for drivers to decide if the device is used or not.
A lockdep check is introduced as inspecting ->users should be done under
input device's mutex.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://lore.kernel.org/r/20200608112211.12125-2-andrzej.p@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This patch supports to store chksum value with compressed
data, and verify the integrality of compressed data while
reading the data.
The feature can be enabled through specifying mount option
'compress_chksum'.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This shifts the responsibility of setting up dentry operations from
fscrypt to the individual filesystems, allowing them to have their own
operations while still setting fscrypt's d_revalidate as appropriate.
Most filesystems can just use generic_set_encrypted_ci_d_ops, unless
they have their own specific dentry operations as well. That operation
will set the minimal d_ops required under the circumstances.
Since the fscrypt d_ops are set later on, we must set all d_ops there,
since we cannot adjust those later on. This should not result in any
change in behavior.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This adds a function to set dentry operations at lookup time that will
work for both encrypted filenames and casefolded filenames.
A filesystem that supports both features simultaneously can use this
function during lookup preparations to set up its dentry operations once
fscrypt no longer does that itself.
Currently the casefolding dentry operation are always set if the
filesystem defines an encoding because the features is toggleable on
empty directories. Unlike in the encryption case, the dentry operations
used come from the parent. Since we don't know what set of functions
we'll eventually need, and cannot change them later, we enable the
casefolding operations if the filesystem supports them at all.
By splitting out the various cases, we support as few dentry operations
as we can get away with, maximizing compatibility with overlayfs, which
will not function if a filesystem supports certain dentry_operations.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Do not use rlimit-based memory accounting for bpf progs. It has been
replaced with memcg-based memory accounting.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-34-guro@fb.com
|
|
Remove rlimit-based accounting infrastructure code, which is not used
anymore.
To provide a backward compatibility, use an approximation of the
bpf map memory footprint as a "memlock" value, available to a user
via map info. The approximation is based on the maximal number of
elements and key and value sizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-33-guro@fb.com
|
|
Bpf maps can be updated from an interrupt context and in such
case there is no process which can be charged. It makes the memory
accounting of bpf maps non-trivial.
Fortunately, after commit 4127c6504f25 ("mm: kmem: enable kernel
memcg accounting from interrupt contexts") and commit b87d8cefe43c
("mm, memcg: rework remote charging API to support nesting")
it's finally possible.
To make the ownership model simple and consistent, when the map
is created, the memory cgroup of the current process is recorded.
All subsequent allocations related to the bpf map are charged to
the same memory cgroup. It includes allocations made by any processes
(even if they do belong to a different cgroup) and from interrupts.
This commit introduces 3 new helpers, which will be used by following
commits to enable the accounting of bpf maps memory:
- bpf_map_kmalloc_node()
- bpf_map_kzalloc()
- bpf_map_alloc_percpu()
They are wrapping popular memory allocation functions. They set
the active memory cgroup to the map's memory cgroup and add
__GFP_ACCOUNT to the passed gfp flags. Then they call into
the corresponding memory allocation function and restore
the original active memory cgroup.
These helpers are supposed to use everywhere except the map creation
path. During the map creation when the map structure is allocated by
itself, it cannot be passed to those helpers. In those cases default
memory allocation function will be used with the __GFP_ACCOUNT flag.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-7-guro@fb.com
|
|
PageKmemcg flag is currently defined as a page type (like buddy, offline,
table and guard). Semantically it means that the page was accounted as a
kernel memory by the page allocator and has to be uncharged on the
release.
As a side effect of defining the flag as a page type, the accounted page
can't be mapped to userspace (look at page_has_type() and comments above).
In particular, this blocks the accounting of vmalloc-backed memory used
by some bpf maps, because these maps do map the memory to userspace.
One option is to fix it by complicating the access to page->mapcount,
which provides some free bits for page->page_type.
But it's way better to move this flag into page->memcg_data flags.
Indeed, the flag makes no sense without enabled memory cgroups and memory
cgroup pointer set in particular.
This commit replaces PageKmemcg() and __SetPageKmemcg() with
PageMemcgKmem() and an open-coded OR operation setting the memcg pointer
with the MEMCG_DATA_KMEM bit. __ClearPageKmemcg() can be simple deleted,
as the whole memcg_data is zeroed at once.
As a bonus, on !CONFIG_MEMCG build the PageMemcgKmem() check will be
compiled out.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-5-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-5-guro@fb.com
|
|
The lowest bit in page->memcg_data is used to distinguish between struct
memory_cgroup pointer and a pointer to a objcgs array. All checks and
modifications of this bit are open-coded.
Let's formalize it using page memcg flags, defined in enum
page_memcg_data_flags.
Additional flags might be added later.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-4-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-4-guro@fb.com
|
|
To gather all direct accesses to struct page's memcg_data field in one
place, let's introduce 3 new helpers to use in the slab accounting code:
struct obj_cgroup **page_objcgs(struct page *page);
struct obj_cgroup **page_objcgs_check(struct page *page);
bool set_page_objcgs(struct page *page, struct obj_cgroup **objcgs);
They are similar to the corresponding API for generic pages, except that
the setter can return false, indicating that the value has been already
set from a different thread.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20201027001657.3398190-3-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-3-guro@fb.com
|
|
Patch series "mm: allow mapping accounted kernel pages to userspace", v6.
Currently a non-slab kernel page which has been charged to a memory cgroup
can't be mapped to userspace. The underlying reason is simple: PageKmemcg
flag is defined as a page type (like buddy, offline, etc), so it takes a
bit from a page->mapped counter. Pages with a type set can't be mapped to
userspace.
But in general the kmemcg flag has nothing to do with mapping to
userspace. It only means that the page has been accounted by the page
allocator, so it has to be properly uncharged on release.
Some bpf maps are mapping the vmalloc-based memory to userspace, and their
memory can't be accounted because of this implementation detail.
This patchset removes this limitation by moving the PageKmemcg flag into
one of the free bits of the page->mem_cgroup pointer. Also it formalizes
accesses to the page->mem_cgroup and page->obj_cgroups using new helpers,
adds several checks and removes a couple of obsolete functions. As the
result the code became more robust with fewer open-coded bit tricks.
This patch (of 4):
Currently there are many open-coded reads of the page->mem_cgroup pointer,
as well as a couple of read helpers, which are barely used.
It creates an obstacle on a way to reuse some bits of the pointer for
storing additional bits of information. In fact, we already do this for
slab pages, where the last bit indicates that a pointer has an attached
vector of objcg pointers instead of a regular memcg pointer.
This commits uses 2 existing helpers and introduces a new helper to
converts all read sides to calls of these helpers:
struct mem_cgroup *page_memcg(struct page *page);
struct mem_cgroup *page_memcg_rcu(struct page *page);
struct mem_cgroup *page_memcg_check(struct page *page);
page_memcg_check() is intended to be used in cases when the page can be a
slab page and have a memcg pointer pointing at objcg vector. It does
check the lowest bit, and if set, returns NULL. page_memcg() contains a
VM_BUG_ON_PAGE() check for the page not being a slab page.
To make sure nobody uses a direct access, struct page's
mem_cgroup/obj_cgroups is converted to unsigned long memcg_data.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-1-guro@fb.com
Link: https://lkml.kernel.org/r/20201027001657.3398190-2-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-2-guro@fb.com
|
|
Currently it's impossible to delete files that use an unsupported
encryption policy, as the kernel will just return an error when
performing any operation on the top-level encrypted directory, even just
a path lookup into the directory or opening the directory for readdir.
More specifically, this occurs in any of the following cases:
- The encryption context has an unrecognized version number. Current
kernels know about v1 and v2, but there could be more versions in the
future.
- The encryption context has unrecognized encryption modes
(FSCRYPT_MODE_*) or flags (FSCRYPT_POLICY_FLAG_*), an unrecognized
combination of modes, or reserved bits set.
- The encryption key has been added and the encryption modes are
recognized but aren't available in the crypto API -- for example, a
directory is encrypted with FSCRYPT_MODE_ADIANTUM but the kernel
doesn't have CONFIG_CRYPTO_ADIANTUM enabled.
It's desirable to return errors for most operations on files that use an
unsupported encryption policy, but the current behavior is too strict.
We need to allow enough to delete files, so that people can't be stuck
with undeletable files when downgrading kernel versions. That includes
allowing directories to be listed and allowing dentries to be looked up.
Fix this by modifying the key setup logic to treat an unsupported
encryption policy in the same way as "key unavailable" in the cases that
are required for a recursive delete to work: preparing for a readdir or
a dentry lookup, revalidating a dentry, or checking whether an inode has
the same encryption policy as its parent directory.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Now that fscrypt_get_encryption_info() is only called from files in
fs/crypto/ (due to all key setup now being handled by higher-level
helper functions instead of directly by filesystems), unexport it and
move its declaration to fscrypt_private.h.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_require_key() is now only used by files in fs/crypto/. So
reduce its visibility to fscrypt_private.h. This is also a prerequsite
for unexporting fscrypt_get_encryption_info().
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
In preparation for reducing the visibility of fscrypt_require_key() by
moving it to fscrypt_private.h, move the call to it from
fscrypt_prepare_setattr() to an out-of-line function.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The last remaining use of fscrypt_get_encryption_info() from filesystems
is for readdir (->iterate_shared()). Every other call is now in
fs/crypto/ as part of some other higher-level operation.
We need to add a new argument to fscrypt_get_encryption_info() to
indicate whether the encryption policy is allowed to be unrecognized or
not. Doing this is easier if we can work with high-level operations
rather than direct filesystem use of fscrypt_get_encryption_info().
So add a function fscrypt_prepare_readdir() which wraps the call to
fscrypt_get_encryption_info() for the readdir use case.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next-2020-12-02
Low level mlx5 updates required by both netdev and rdma trees.
* tag 'mlx5-next-2020-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Treat host PF vport as other (non eswitch manager) vport
net/mlx5: Enable host PF HCA after eswitch is initialized
net/mlx5: Rename peer_pf to host_pf
net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
net/mlx5: Export steering related functions
net/mlx5: Expose other function ifc bits
net/mlx5: Expose IP-in-IP TX and RX capability bits
net/mlx5: Update the hardware interface definition for vhca state
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Avoid exposing driver internal command helpers
net/mlx5: Add ts_cqe_to_dest_cqn related bits
net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
net/mlx5: Check dr mask size against mlx5_match_param size
net/mlx5: Add sampler destination type
net/mlx5: Add sample offload hardware bits and structures
====================
Link: https://lore.kernel.org/r/20201203011010.213440-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
