| Age | Commit message (Collapse) | Author |
|---|
|
Currently the maximum HID report size which can be buffered by the kernel is
8KB. This is sufficient for the vast majority of HID devices on the market, as
most HID reports are fairly small.
However, some unusual devices such as the Elgate Stream Deck exist which use a
report size slightly over 8KB for the image data that is sent to the device.
Reports these large cannot be buffered by the regular HID subsystem currently,
thus the only way to use such device is to bypass the HID subsystem entirely.
This increases the maximum HID report size to 16KB, which should cover all
sanely designed HID devices.
Signed-off-by: Dean Camera <dean@fourwalledcubicle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
"regualtor" -> "regulator"
Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the needed board data to support mt8192 SoC.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Weiyi Lu <weiyi.lu@mediatek.com>
Link: https://lore.kernel.org/r/20201030113622.201188-17-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the needed board data to support mt8183 SoC.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201030113622.201188-12-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Bus protection is not exclusively done by calling the infracfg misc driver.
Make the calls for setting and clearing the bus protection generic so
that we can use other blocks for it as well.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201030113622.201188-6-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
redact XFRM SA secret in the netlink response to xfrm_get_sa()
or dumpall sa.
Enable lockdown, confidentiality mode, at boot or at run time.
e.g. when enabled:
cat /sys/kernel/security/lockdown
none integrity [confidentiality]
ip xfrm state
src 172.16.1.200 dst 172.16.1.100
proto esp spi 0x00000002 reqid 2 mode tunnel
replay-window 0
aead rfc4106(gcm(aes)) 0x0000000000000000000000000000000000000000 96
note: the aead secret is redacted.
Redacting secret is also a FIPS 140-2 requirement.
v1->v2
- add size checks before memset calls
v2->v3
- replace spaces with tabs for consistency
v3->v4
- use kernel lockdown instead of a /proc setting
v4->v5
- remove kconfig option
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
At the moment we allow bypassing DMA ops only when we can do this for
the entire RAM. However there are configs with mixed type memory
where we could still allow bypassing IOMMU in most cases;
POWERPC with persistent memory is one example.
This adds an arch hook to determine where bypass can still work and
we invoke direct DMA API. The following patch checks the bus limit
on POWERPC to allow or disallow direct mapping.
This adds a ARCH_HAS_DMA_MAP_DIRECT config option to make the arch_xxxx
hooks no-op by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When eswitch manager is running on ECPF, host PF should be treated
as non eswitch manager port, similar to other VF vports.
Fail to do so, results in firmware treating PF's vport as ECPF
vport for eswitch ACL tables.
Non zero check to figure out if a given vport is other vport or not
is not sufficient becase PF vport number = 0 on ECPF.
Hence, create esw acl tables with an attribute of other vport.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
To match the hardware spec, rename peer_pf to host_pf.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Subsequent patch implements helper API which has mlx5_core_dev
as const pointer, make its caller API too const *.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Expose other function ifc bits to enable setting HCA caps on behalf of
other function.
In addition, expose vhca_resource_manager bit to control whether the
other function functionality is supported by firmware.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Expose FW indication that it supports stateless offloads for IP over IP
tunneled packets per direction. In some HW like ConnectX-4 IP-in-IP
support is not symmetric, it supports steering on the inner header but
it doesn't TX-Checksum and TSO. Add IP-in-IP capability per direction to
cover this case as well.
Note: only if both indications are turned on, the global
tunnel_stateless_ip_over_ip is on too.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Update the hardware interface definitions to query and modify vhca
state, related EQE and event code.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5 command init and cleanup routines are internal to mlx5_core driver.
Hence, avoid exporting them and move their definition to mlx5_core
driver's internal file mlx5_core.h
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add a bit in HCA capabilities layout to indicate if ts_cqe_to_dest_cqn is
supported.
In addition, add ts_cqe_to_dest_cqn field to SQ context, for driver to
set the actual CQN.
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add misc4 match params to enable matching on prog_sample_fields.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The flow sampler object is a new destination type. Add a new member
for the flow destination.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Hardware introduces flow sampler object for packet sampling.
Add the offload hardware bits and structures.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Liao <yung-chuan.liao@linux.intel.com>:
The MIPI SoundWire Device Class standard will define audio functionality
beyond the scope of the existing SoundWire 1.2 standard, which is limited
to the bus and interface.
The description is inspired by the USB Audio Class, with "functions",
"entities", "control selectors", "audio clusters". The main difference
with the USB Audio class is that the devices are typically on a motherboard
and descriptors stored in platform firmware instead of being retrieved
from the device.
The current set of devices managed in this patchset are conformant with the
SDCA 0.6 specification and require dedicated drivers since the descriptors
and platform firmware specification is not complete at this time. They do
however rely on the hierarchical addressing required by the SDCA standard.
Future devices conformant with SDCA 1.0 should rely on a class driver.
This series adds support for the hierarchical SDCA addressing and extends
regmap. It then provides 3 codecs for RT711-sdca headset codec, RT1316
amplifier and RT715-scda microphone codec.
Note that the release of this code before the formal adoption of the
SDCA 1.0 specification was formally endorsed by the MIPI Board to make
sure there is no delay for Linux-based support of this specification.
Jack Yu (1):
ASoC/SoundWire: rt715-sdca: First version of rt715 sdw sdca codec
driver
Pierre-Louis Bossart (2):
soundwire: SDCA: add helper macro to access controls
regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ
Shuming Fan (2):
ASoC/SoundWire: rt1316: Add RT1316 SDCA vendor-specific driver
ASoC/SoundWire: rt711-sdca: Add RT711 SDCA vendor-specific driver
drivers/base/regmap/Kconfig | 6 +-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-sdw-mbq.c | 101 ++
include/linux/regmap.h | 35 +
include/linux/soundwire/sdw_registers.h | 32 +
sound/soc/codecs/Kconfig | 20 +
sound/soc/codecs/Makefile | 6 +
sound/soc/codecs/rt1316-sdw.c | 756 ++++++++++++
sound/soc/codecs/rt1316-sdw.h | 115 ++
sound/soc/codecs/rt711-sdca-sdw.c | 424 +++++++
sound/soc/codecs/rt711-sdca-sdw.h | 101 ++
sound/soc/codecs/rt711-sdca.c | 1481 +++++++++++++++++++++++
sound/soc/codecs/rt711-sdca.h | 246 ++++
sound/soc/codecs/rt715-sdca-sdw.c | 278 +++++
sound/soc/codecs/rt715-sdca-sdw.h | 170 +++
sound/soc/codecs/rt715-sdca.c | 936 ++++++++++++++
sound/soc/codecs/rt715-sdca.h | 124 ++
17 files changed, 4831 insertions(+), 1 deletion(-)
create mode 100644 drivers/base/regmap/regmap-sdw-mbq.c
create mode 100644 sound/soc/codecs/rt1316-sdw.c
create mode 100644 sound/soc/codecs/rt1316-sdw.h
create mode 100644 sound/soc/codecs/rt711-sdca-sdw.c
create mode 100644 sound/soc/codecs/rt711-sdca-sdw.h
create mode 100644 sound/soc/codecs/rt711-sdca.c
create mode 100644 sound/soc/codecs/rt711-sdca.h
create mode 100644 sound/soc/codecs/rt715-sdca-sdw.c
create mode 100644 sound/soc/codecs/rt715-sdca-sdw.h
create mode 100644 sound/soc/codecs/rt715-sdca.c
create mode 100644 sound/soc/codecs/rt715-sdca.h
base-commit: 3650b228f83adda7e5ee532e2b90429c03f7b9ec
--
2.17.1
|
|
0day reported one -22.7% regression for will-it-scale page_fault2
case [1] on a 4 sockets 144 CPU platform, and bisected to it to be
caused by Waiman's optimization (commit bd0b230fe1) of saving one
'struct page_counter' space for 'struct mem_cgroup'.
Initially we thought it was due to the cache alignment change introduced
by the patch, but further debug shows that it is due to some hot data
members ('vmstats_local', 'vmstats_percpu', 'vmstats') sit in 2 adjacent
cacheline (2N and 2N+1 cacheline), and when adjacent cache line prefetch
is enabled, it triggers an "extended level" of cache false sharing for
2 adjacent cache lines.
So exchange the 2 member blocks, while keeping mostly the original
cache alignment, which can restore and even enhance the performance,
and save 64 bytes of space for 'struct mem_cgroup' (from 2880 to 2816,
with 0day's default RHEL-8.3 kernel config)
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Fixes: bd0b230fe145 ("mm/memcg: unify swap and memsw page counters")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The SoundWire 1.1 specification only allowed for reads and writes of
bytes. The SoundWire 1.2 specification adds a new capability to
transfer "Multi-Byte Quantities" (MBQ) across the bus. The transfers
still happens one-byte-at-a-time, but the update is atomic.
For example when writing a 16-bit volume, the first byte transferred
is only taken into account when the second byte is successfully
transferred.
The mechanism is symmetrical for read and writes:
- On a read, the address of the last byte to be read is modified by
setting the MBQ bit
- On a write, the address of all but the last byte to be written are
modified by setting the MBQ bit. The address for the last byte relies
on the MBQ bit being cleared.
The current definitions for MBQ-based controls in the SDCA draft
standard are limited to 16 bits for volumes, so for now this is the
only supported format. An update will be provided if and when support
for 24-bit and 32-bit values is specified by the SDCA standard.
One possible objection is that this code could have been handled with
regmap-sdw.c. However this is a new spec addition not handled by every
SoundWire 1.1 and non-SDCA device, so there's no reason to load code
that will never be used.
Also in practice it's extremely unlikely that CONFIG_REGMAP would not
be selected with CONFIG_REGMAP_MBQ selected. However there's no
functional dependency between the two modules so they can be selected
separately.
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201103172226.4278-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The upcoming SDCA (SoundWire Device Class Audio) specification defines
a hierarchical encoding to interface with Class-defined capabilities.
The specification is not yet accessible to the general public but this
information is released with explicit permission from the MIPI Board
to avoid delays with SDCA support on Linux platforms.
A block of 64 MBytes of register addresses are allocated to SDCA
controls, starting at address 0x40000000. The 26 LSBs which identify
individual controls are set based on the following variables:
- Function Number. An SCDA device can be split in up to 8 independent
Functions. Each of these Functions is described in the SDCA
specification, e.g. Smart Amplifier, Smart Microphone, Simple
Microphone, Jack codec, HID, etc.
- Entity Number. Within each Function, an Entity is an identifiable
block. Up to 127 Entities are connected in a pre-defined
graph (similar to USB), with Entity0 reserved for Function-level
configurations. In contrast to USB, the SDCA spec pre-defines
Function Types, topologies, and allowed options, i.e. the degree of
freedom is not unlimited to limit the possibility of errors in
descriptors leading to software quirks.
- Control Selector. Within each Entity, the SDCA specification defines
48 controls such as Mute, Gain, AGC, etc, and 16 implementation
defined ones. Some Control Selectors might be used for low-level
platform setup, and other exposed to applications and users. Note
that the same Control Selector capability, e.g. Latency control,
might be located at different offsets in different entities, the
Control Selector mapping is Entity-specific.
- Control Number. Some Control Selectors allow channel-specific values
to be set, with up to 64 channels allowed. This is mostly used for
volume control.
- Current/Next values. Some Control Selectors are
'Dual-Ranked'. Software may either update the Current value directly
for immediate effect. Alternatively, software may write into the
'Next' values and update the SoundWire 1.2 'Commit Groups' register
to copy 'Next' values into 'Current' ones in a synchronized
manner. This is different from bank switching which is typically
used to change the bus configuration only.
- MBQ. the Multi-Byte Quantity bit is used to provide atomic updates
when accessing more that one byte, for example a 16-bit volume
control would be updated consistently, the intermediate values
mixing old MSB with new LSB are not applied.
These 6 parameters are used to build a 32-bit address to access the
desired Controls. Because of address range, paging is required, but
the most often used parameter values are placed in the lower 16 bits
of the address. This helps to keep the paging registers constant while
updating Controls for a specific Device/Function.
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201103172226.4278-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TD.4.7.3. Try SNK DRP Connect Try.SRC DRP fails. The compliance
tester mimics being a Try.SRC USB-C port.
The failure is due to TCPM exiting SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS
when VBUS is not present eventhough when SNK.Rp is seen. Exit to
SRC_TRYWAIT from SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS only when SNK.Rp
is not seen for PD_T_TRY_CC_DEBOUNCE.
>From the spec:
The port shall then transition to Attached.SNK when the SNK.Rp state
is detected on exactly one of the CC1 or CC2 pins for at least
tTryCCDebounce and VBUS is detected. Alternatively, the port shall
transition to TryWait.SRC if SNK.Rp state is not detected for
tTryCCDebounce.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20201125014804.1596719-1-badhri@google.com
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Further perf/core patches will depend on:
d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")
which is already in Linus' tree.
|
|
gpr_get() does membuf_write() twice to override pt_regs->msr in
between. We can call membuf_write() once and change ->msr in the
kernel buffer, this simplifies the code and the next fix.
The patch adds a new simple helper, membuf_at(offs), it returns the
new membuf which can be safely used after membuf_write().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[mpe: Fixup some minor whitespace issues noticed by Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201119160221.GA5188@redhat.com
|
|
USB Power Delivery Specification R3.0 introduced separate
field for the DFP product type to the ID Header VDO.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201125120642.37156-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A new API, rproc_set_firmware() is added to allow the remoteproc platform
drivers and remoteproc client drivers to be able to configure a custom
firmware name that is different from the default name used during
remoteproc registration. This function is being introduced to provide
a kernel-level equivalent of the current sysfs interface to remoteproc
client drivers, and can only change firmwares when the remoteproc is
offline. This allows some remoteproc drivers to choose different firmwares
at runtime based on the functionality the remote processor is providing.
The TI PRU Ethernet driver will be an example of such usage as it
requires to use different firmwares for different supported protocols.
Also, update the firmware_store() function used by the sysfs interface
to reuse this function to avoid code duplication.
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20201121032042.6195-1-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The current semantic for napi_consume_skb() is that caller need
to provide non-zero budget when calling from NAPI context, and
breaking this semantic will cause hard to debug problem, because
_kfree_skb_defer() need to run in atomic context in order to push
the skb to the particular cpu' napi_alloc_cache atomically.
So add the lockdep_assert_in_softirq() to assert when the running
context is not in_softirq, in_softirq means softirq is serving or
BH is disabled, which has a ambiguous semantics due to the BH
disabled confusion, so add a comment to emphasize that.
And the softirq context can be interrupted by hard IRQ or NMI
context, lockdep_assert_in_softirq() need to assert about hard
IRQ or NMI context too.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is in preparation to add a helper for BPF LSM programs to use
IMA hashes when attached to LSM hooks. There are LSM hooks like
inode_unlink which do not have a struct file * argument and cannot
use the existing ima_file_hash API.
An inode based API is, therefore, useful in LSM based detections like an
executable trying to delete itself which rely on the inode_unlink LSM
hook.
Moreover, the ima_file_hash function does nothing with the struct file
pointer apart from calling file_inode on it and converting it to an
inode.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-2-kpsingh@chromium.org
|
|
Now that all the PHY drivers have been migrated to directly implement
the generic .handle_interrupt() callback for a seamless support of
shared IRQs and all the .config_inter() implementations clear any
pending interrupts, we can safely remove the two callbacks.
With this patch, phylib has a proper support for shared IRQs (and not
just for multi-PHY devices. A PHY driver must implement both the
.handle_interrupt() and .config_intr() callbacks for the IRQs to be
actually used.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 4b1faf931650 ("block: Kill bio_pair_split()"), there's
no user of BIO_SPLIT_ENTRIES anymore.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Clean up the module-param macros by adding some indentation and using
the __aligned() macro to improve readability.
Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Specify type alignment for kernel parameters instead of sizeof(void *).
The alignment attribute is used to prevent gcc from increasing the
alignment of objects with static extent as an optimisation, something
which would mess up the __param array stride.
Using __alignof__(struct kernel_param) rather than sizeof(void *) is
preferred since it better indicates why it is there and doesn't break
should the type size or alignment change.
Note that on m68k the alignment of struct kernel_param is actually two
and that adding a 1- or 2-byte field to the 20-byte struct would cause a
breakage with the current 4-byte alignment.
Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Drop the redundant "unused" attributes from module-parameter structures
already marked "used".
Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Instead of using the array-of-pointers trick to avoid having gcc mess up
the built-in module-version array stride, specify type alignment when
declaring entries to prevent gcc from increasing alignment.
This is essentially an alternative (one-line) fix to the problem
addressed by commit b4bc842802db ("module: deal with alignment issues in
built-in module versions").
gcc can increase the alignment of larger objects with static extent as
an optimisation, but this can be suppressed by using the aligned
attribute when declaring variables.
Note that we have been relying on this behaviour for kernel parameters
for 16 years and it indeed hasn't changed since the introduction of the
aligned attribute in gcc-3.1.
Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Commit 98562ad8cb03 ("module: explicitly align module_version_attribute
structure") added an alignment attribute to the struct
module_version_attribute type in order to fix an alignment issue on m68k
where the structure is 2-byte aligned while MODULE_VERSION() forced the
__modver section entries to be 4-byte aligned (sizeof(void *)).
This was essentially an alternative fix to the problem addressed by
b4bc842802db ("module: deal with alignment issues in built-in module
versions") which used the array-of-pointer trick to prevent gcc from
increasing alignment of the version attribute entries. And with the
pointer indirection in place there's no need to increase the alignment
of the type.
Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Add a quirk IO_PGTABLE_QUIRK_ARM_OUTER_WBWA to override
the outer-cacheability attributes set in the TCR for a
non-coherent page table walker when using system cache.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/f818676b4a2a9ad1edb92721947d47db41ed6a7c.1606287059.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a new iommu domain attribute DOMAIN_ATTR_IO_PGTABLE_CFG
for pagetable configuration which initially will be used to
set quirks like for system cache aka last level cache to be
used by client drivers like GPU to set right attributes for
caching the hardware pagetables into the system cache and
later can be extended to include other page table configuration
data.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/9190aa16f378fc0a7f8e57b2b9f60b033e7eeb4f.1606287059.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a iommu_dma_free_cpu_cached_iovas function to allow drivers which
use the dma-iommu ops to free cached cpu iovas.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allow the iommu_unmap_fast to return newly freed page table pages and
pass the freelist to queue_iova in the dma-iommu ops path.
This is useful for iommu drivers (in this case the intel iommu driver)
which need to wait for the ioTLB to be flushed before newly
free/unmapped page table pages can be freed. This way we can still batch
ioTLB free operations and handle the freelists.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DP0 has reserved fields and the read-only SDCA_CASCADE bit. We should
not try to write values in these fields, so add a formal definition
for clearable interrupts to be used in DP0 interrupt handling.
DPN also has reserved fields so add definitions for clearable
interrupts as well.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A copy-pasta mistake tries to set SYSCALL_WORK flags instead of TIF
flags for !CONFIG_GENERIC_ENTRY. Also, add safeguards to catch this at
compilation time.
Fixes: 3136b93c3fb2 ("entry: Expose helpers to migrate TIF to SYSCALL_WORK flags")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87a6v8qd9p.fsf_-_@collabora.com
|
|
In an encrypted directory, a regular dentry (one that doesn't have the
no-key name flag) can only be created if the directory's encryption key
is available.
Therefore the calls to fscrypt_require_key() in __fscrypt_prepare_link()
and __fscrypt_prepare_rename() are unnecessary, as these functions
already check that the dentries they're given aren't no-key names.
Remove these unnecessary calls to fscrypt_require_key().
Link: https://lore.kernel.org/r/20201118075609.120337-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
It's possible to create a duplicate filename in an encrypted directory
by creating a file concurrently with adding the encryption key.
Specifically, sys_open(O_CREAT) (or sys_mkdir(), sys_mknod(), or
sys_symlink()) can lookup the target filename while the directory's
encryption key hasn't been added yet, resulting in a negative no-key
dentry. The VFS then calls ->create() (or ->mkdir(), ->mknod(), or
->symlink()) because the dentry is negative. Normally, ->create() would
return -ENOKEY due to the directory's key being unavailable. However,
if the key was added between the dentry lookup and ->create(), then the
filesystem will go ahead and try to create the file.
If the target filename happens to already exist as a normal name (not a
no-key name), a duplicate filename may be added to the directory.
In order to fix this, we need to fix the filesystems to prevent
->create(), ->mkdir(), ->mknod(), and ->symlink() on no-key names.
(->rename() and ->link() need it too, but those are already handled
correctly by fscrypt_prepare_rename() and fscrypt_prepare_link().)
In preparation for this, add a helper function fscrypt_is_nokey_name()
that filesystems can use to do this check. Use this helper function for
the existing checks that fs/crypto/ does for rename and link.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201118075609.120337-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Commit 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
addressed the problem that packets were discarded from the Tx AF_XDP
ring, when the driver returned NETDEV_TX_BUSY. Part of the fix was
bumping the skbuff reference count, so that the buffer would not be
freed by dev_direct_xmit(). A reference count larger than one means
that the skbuff is "shared", which is not the case.
If the "shared" skbuff is sent to the generic XDP receive path,
netif_receive_generic_xdp(), and pskb_expand_head() is entered the
BUG_ON(skb_shared(skb)) will trigger.
This patch adds a variant to dev_direct_xmit(), __dev_direct_xmit(),
where a user can select the skbuff free policy. This allows AF_XDP to
avoid bumping the reference count, but still keep the NETDEV_TX_BUSY
behavior.
Fixes: 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201123175600.146255-1-bjorn.topel@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Prelude to gssapi support
Here are some patches that do some reorganisation of the security class
handling in rxrpc to allow implementation of the RxGK security class that
will allow AF_RXRPC to use GSSAPI-negotiated tokens and better crypto. The
RxGK security class is not included in this patchset.
It does the following things:
(1) Add a keyrings patch to provide the original key description, as
provided to add_key(), to the payload preparser so that it can
interpret the content on that basis. Unfortunately, the rxrpc_s key
type wasn't written to interpret its payload as anything other than a
string of bytes comprising a key, but for RxGK, more information is
required as multiple Kerberos enctypes are supported.
(2) Remove the rxk5 security class key parsing. The rxk5 class never got
rolled out in OpenAFS and got replaced with rxgk.
(3) Support the creation of rxrpc keys with multiple tokens of different
types. If some types are not supported, the ENOPKG error is
suppressed if at least one other token's type is supported.
(4) Punt the handling of server keys (rxrpc_s type) to the appropriate
security class.
(5) Organise the security bits in the rxrpc_connection struct into a
union to make it easier to override for other classes.
(6) Move some bits from core code into rxkad that won't be appropriate to
rxgk.
* tag 'rxrpc-next-20201123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
rxrpc: Ask the security class how much space to allow in a packet
rxrpc: rxkad: Don't use pskb_pull() to advance through the response packet
rxrpc: Organise connection security to use a union
rxrpc: Don't reserve security header in Tx DATA skbuff
rxrpc: Merge prime_packet_security into init_connection_security
rxrpc: Fix example key name in a comment
rxrpc: Ignore unknown tokens in key payload unless no known tokens
rxrpc: Make the parsing of xdr payloads more coherent
rxrpc: Allow security classes to give more info on server keys
rxrpc: Don't leak the service-side session key to userspace
rxrpc: Hand server key parsing off to the security class
rxrpc: Split the server key type (rxrpc_s) into its own file
rxrpc: Don't retain the server key in the connection
rxrpc: Support keys with multiple authentication tokens
rxrpc: List the held token types in the key description in /proc/keys
rxrpc: Remove the rxk5 security class as it's now defunct
keys: Provide the original description to the key preparser
====================
Link: https://lore.kernel.org/r/160616220405.830164.2239716599743995145.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This controller provides DMAengine capabilities for a variety of peripheral
buses such as I2C, UART, and SPI. By using GPI dmaengine driver, bus
drivers can use a standardize interface that is protocol independent to
transfer data between memory and peripheral.
Link: https://lore.kernel.org/r/20201109085450.24843-4-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
