summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2021-02-05IB/mlx5: Move mlx5_port_caps from mlx5_core_dev to mlx5_ib_devParav Pandit
mlx5_port_caps are RDMA specific capabilities. These are not used by the mlx5_core_device at all. Move them to mlx5_ib_dev where it is used and reduce the scope of it to multiple drivers. Link: https://lore.kernel.org/r/20210203130133.4057329-2-leon@kernel.org Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-05Merge tag 'mhi-for-v5.12' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Manivannan writes: MHI changes for v5.12 Loic improved the MHI PCI generic controller by adding support for DIAG channel, PCI error handling, suspend/recovery/resume, and health check. Loic also added support for resetting the MHI device as per the MHI specification. This includes writing to a specific register for default cases and looking for controller specific callback when provided. Along with this Loic, also added a new API which gets the number for free TREs (Transfer Ring Elements) from the MHI core. The client drivers can make use of this API and the current consumer is the "mhi-net" driver. For taking both the "mhi-net" driver change and the API change, we created "mhi-net-immutable" branch for this patch and merged the same into net-next and mhi-next. Carl added a patch which lets the controller driver to pass the custom IRQ flags for BHI and MHI event interrupts to the MHI core. The current consumer of this feature is the ath11k MHI controller driver. For taking both the changes, we created "mhi-ath11k-immutable" branch for this patch and merged into ath11k-next and mhi-next. Finally, Loic cleaned up the MHI queue APIs and fixed the shared MSI vector support. * tag 'mhi-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: pci_generic: Increase num of elements in hw event ring mhi: pci_generic: Print warning in case of firmware crash bus: mhi: core: Add helper API to return number of free TREs mhi: core: Factorize mhi queuing mhi: use irq_flags if controller driver configures it mhi: pci_generic: Fix shared MSI vector support mhi: unconstify mhi_event_config bus: mhi: Ensure correct ring update ordering with memory barrier mhi: pci_generic: Set irq moderation value to 1ms for hw channels mhi: pci_generic: Add diag channels mhi: pci_generic: Increase controller timeout value mhi: pci_generic: Add health-check mhi: pci_generic: Add PCI error handlers mhi: pci_generic: Add suspend/resume/recovery procedure mhi: pci_generic: Add support for reset mhi: pci_generic: Enable burst mode for hardware channels mhi: pci-generic: Increase number of hardware events bus: mhi: core: Add device hardware reset support
2021-02-05mtd: spi-nor: Add Global Block Unlock commandTudor Ambarus
The Global Block Unlock command has different names depending on the manufacturer, but always the same command value: 0x98. Macronix's MX25U12835F names it Gang Block Unlock, Winbond's W25Q128FV names it Global Block Unlock and Microchip's SST26VF064B names it Global Block Protection Unlock. Used in the Individual Block Protection mode, which is mutually exclusive with the Block Protection mode (BP0-3). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20210121110546.382633-1-tudor.ambarus@microchip.com
2021-02-05Merge branch 'devel-stable' of git://git.armlinux.org.uk/~rmk/linux-arm into ↵Greg Kroah-Hartman
char-misc-next This merges from linux-arm at 860660fd829e ("ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void") into char-misc-next to get the amba fixes from Uwe. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-05Drivers: hv: vmbus: Resolve race condition in vmbus_onoffer_rescind()Andrea Parri (Microsoft)
An erroneous or malicious host could send multiple rescind messages for a same channel. In vmbus_onoffer_rescind(), the guest maps the channel ID to obtain a pointer to the channel object and it eventually releases such object and associated data. The host could time rescind messages and lead to an use-after-free. Add a new flag to the channel structure to make sure that only one instance of vmbus_onoffer_rescind() can get the reference to the channel object. Reported-by: Juan Vazquez <juvazq@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20201209070827.29335-6-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-02-05hv_utils: Add validation for untrusted Hyper-V valuesAndres Beltran
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause indexing off the end of the icversion_data array in vmbus_prep_negotiate_resp(). Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20201109100704.9152-1-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-02-05Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring bufferAndres Beltran
Pointers to ring-buffer packets sent by Hyper-V are used within the guest VM. Hyper-V can send packets with erroneous values or modify packet fields after they are processed by the guest. To defend against these scenarios, return a copy of the incoming VMBus packet after validating its length and offset fields in hv_pkt_iter_first(). In this way, the packet can no longer be modified by the host. Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: netdev@vger.kernel.org Cc: linux-scsi@vger.kernel.org Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20201208045311.10244-1-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-02-05software node: Provide replacement for device_add_properties()Heikki Krogerus
At the moment the function device_del() is calling device_remove_properties() unconditionally. That will result into the reference count of the software node attached to the device being decremented, and in most cases it will hit 0 at that point. So in practice device_del() will unregister the software node attached to the device, even if that was not the intention of the caller. Right now software nodes can not be reused or shared because of that. So device_del() can not unregister the software nodes unconditionally like that. Unfortunately some of the users of device_add_properties() are now relying on this behaviour. Because of that, and also in general, we do need a function that can offer similar behaviour where the lifetime of the software node is bound to the lifetime of the device. But it just has to be a separate function so the behaviour is optional. We can not remove the device_remove_properties() call from device_del() before we have that new function, and before we have replaced device_add_properties() calls with it in all the places that require that behaviour. This adds function device_create_managed_software_node() that can be used for exactly that purpose. Software nodes created with it are declared "managed", and separate handling for those nodes is added to the software node code. The reference count of the "managed" nodes is decremented when the device they are attached to is removed. This will not affect the other nodes that are not declared "managed". The function device_create_managed_software_node() has also one additional feature that device_add_properties() does not have. It allows the software nodes created with it to be part of a node hierarchy by taking also an optional parent node as parameter. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210204141711.53775-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-05Merge tag ↵Greg Kroah-Hartman
'tag-ib-usb-typec-chrome-platform-cros-ec-typec-clear-pd-discovery-events-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux into usb-next Benson writes: clear-pd-discovery-events This pair of patches fixes an issue where cros_ec_typec creates stale cable nodes on detach because of uncleared pd discovery status events. * tag 'tag-ib-usb-typec-chrome-platform-cros-ec-typec-clear-pd-discovery-events-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_typec: Clear Type C disc events platform/chrome: cros_ec: Import Type C control command
2021-02-04udp: fix skb_copy_and_csum_datagram with odd segment sizesWillem de Bruijn
When iteratively computing a checksum with csum_block_add, track the offset "pos" to correctly rotate in csum_block_add when offset is odd. The open coded implementation of skb_copy_and_csum_datagram did this. With the switch to __skb_datagram_iter calling csum_and_copy_to_iter, pos was reinitialized to 0 on each call. Bring back the pos by passing it along with the csum to the callback. Changes v1->v2 - pass csum value, instead of csump pointer (Alexander Duyck) Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/ Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers") Reported-by: Oliver Graute <oliver.graute@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04ipv6: silence compilation warning for non-IPV6 buildsLeon Romanovsky
The W=1 compilation of allmodconfig generates the following warning: net/ipv6/icmp.c:448:6: warning: no previous prototype for 'icmp6_send' [-Wmissing-prototypes] 448 | void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info, | ^~~~~~~~~~ Fix it by providing function declaration for builds with ipv6 as a module. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04net: introduce common dev_page_is_reusable()Alexander Lobakin
A bunch of drivers test the page before reusing/recycling for two common conditions: - if a page was allocated under memory pressure (pfmemalloc page); - if a page was allocated at a distant memory node (to exclude slowdowns). Introduce a new common inline for doing this, with likely() already folded inside to make driver code a bit simpler. Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04skbuff: constify skb_propagate_pfmemalloc() "page" argumentAlexander Lobakin
The function doesn't write anything to the page struct itself, so this argument can be const. Misc: align second argument to the brace while at it. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04mm: constify page_is_pfmemalloc() argumentAlexander Lobakin
The function only tests for page->index, so its argument should be const. Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04net: add EXPORT_INDIRECT_CALLABLE wrapperBrian Vazquez
When a static function is annotated with INDIRECT_CALLABLE_SCOPE and CONFIG_RETPOLINE is set, the static keyword is removed. Sometimes the function needs to be exported but EXPORT_SYMBOL can't be used because if CONFIG_RETPOLINE is not set, we will attempt to export a static symbol. This patch introduces a new indirect call wrapper: EXPORT_INDIRECT_CALLABLE. This basically does EXPORT_SYMBOL when CONFIG_RETPOLINE is set, but does nothing when it's not. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Brian Vazquez <brianvv@google.com> Link: https://lore.kernel.org/r/20210204181839.558951-1-brianvv@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04netlink: add tracepoint at NL_SET_ERR_MSGMarcelo Ricardo Leitner
Often userspace won't request the extack information, or they don't log it because of log level or so, and even when they do, sometimes it's not enough to know exactly what caused the error. Netlink extack is the standard way of reporting erros with descriptive error messages. With a trace point on it, we then can know exactly where the error happened, regardless of userspace app. Also, we can even see if the err msg was overwritten. The wrapper do_trace_netlink_extack() is because trace points shouldn't be called from .h files, as trace points are not that small, and the function call to do_trace_netlink_extack() on the macros is not protected by tracepoint_enabled() because the macros are called from modules, and this would require exporting some trace structs. As this is error path, it's better to export just the wrapper instead. v2: removed leftover tracepoint declaration Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/4546b63e67b2989789d146498b13cc09e1fdc543.1612403190.git.marcelo.leitner@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05Merge tag 'mediatek-drm-next-5.12' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.12 1. Decouple Mediatek DRM sub driver 2. Share mtk mutex driver for both DRM and MDP 3. Add support for SoC MT8183 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210204151750.7550-1-chunkuang.hu@kernel.org
2021-02-04cpufreq: Remove unused flag CPUFREQ_PM_NO_WARNViresh Kumar
This flag is set by one of the drivers but it isn't used in the code otherwise. Remove the unused flag and update the driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-04cpufreq: Remove CPUFREQ_STICKY flagViresh Kumar
During cpufreq driver's registration, if the ->init() callback for all the CPUs fail then there is not much point in keeping the driver around as it will only account for more of unnecessary noise, for example cpufreq core will try to suspend/resume the driver which never got registered properly. The removal of such a driver is avoided if the driver carries the CPUFREQ_STICKY flag. This was added way back [1] in 2004 and perhaps no one should ever need it now. A lot of drivers do set this flag, probably because they just copied it from other drivers. This was added earlier for some platforms [2] because their cpufreq drivers were getting registered before the CPUs were registered with subsys framework. And hence they used to fail. The same isn't true anymore though. The current code flow in the kernel is: start_kernel() -> kernel_init() -> kernel_init_freeable() -> do_basic_setup() -> driver_init() -> cpu_dev_init() -> subsys_system_register() //For CPUs -> do_initcalls() -> cpufreq_register_driver() Clearly, the CPUs will always get registered with subsys framework before any cpufreq driver can get probed. Remove the flag and update the relevant drivers. Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/include/linux/cpufreq.h?id=7cc9f0d9a1ab04cedc60d64fd8dcf7df224a3b4d # [1] Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/arch/arm/mach-sa1100/cpu-sa1100.c?id=f59d3bbe35f6268d729f51be82af8325d62f20f5 # [2] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-04platform/chrome: cros_ec: Import Type C control commandPrashant Malani
This command is used to communicate with the Chrome Embedded Controller (EC) regarding USB Type C events and state. These header updates are included in the latest Chrome OS EC headers [1] [1] https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/main/include/ec_commands.h Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20210203021539.745239-1-pmalani@chromium.org Signed-off-by: Benson Leung <bleung@chromium.org>
2021-02-04coresight: Convert claim/disclaim operations to use access wrappersSuzuki K Poulose
Convert the generic CLAIM tag management APIs to use the device access layer abstraction. Link: https://lore.kernel.org/r/20210110224850.1880240-7-suzuki.poulose@arm.com Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210201181351.1475223-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04coresight: Convert coresight_timeout to use access abstractionSuzuki K Poulose
Convert the generic routines to use the new access abstraction layer gradually, starting with coresigth_timeout. Link: https://lore.kernel.org/r/20210110224850.1880240-6-suzuki.poulose@arm.com Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210201181351.1475223-8-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04coresight: Introduce device access abstractionSuzuki K Poulose
We are about to introduce support for sysreg access to ETMv4.4+ component. Since there are generic routines that access the registers (e.g, CS_LOCK/UNLOCK , claim/disclaim operations, timeout) and in order to preserve the logic of these operations at a single place we introduce an abstraction layer for the accesses to a given device. Link: https://lore.kernel.org/r/20210110224850.1880240-4-suzuki.poulose@arm.com Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210201181351.1475223-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04soc / drm: mediatek: Move mtk mutex driver to soc folderCK Hu
mtk mutex is used by DRM and MDP driver, and its function is SoC-specific, so move it to soc folder. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-02-04iommu/vt-d: Parse SATC reporting structureYian Chen
Software should parse every SATC table and all devices in the tables reported by the BIOS and keep the information in kernel list for further reference. Signed-off-by: Yian Chen <yian.chen@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210203093329.1617808-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20210204014401.2846425-7-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-04iommu/vt-d: Audit IOMMU Capabilities and add helper functionsKyung Min Park
Audit IOMMU Capability/Extended Capability and check if the IOMMUs have the consistent value for features. Report out or scale to the lowest supported when IOMMU features have incompatibility among IOMMUs. Report out features when below features are mismatched: - First Level 5 Level Paging Support (FL5LP) - First Level 1 GByte Page Support (FL1GP) - Read Draining (DRD) - Write Draining (DWD) - Page Selective Invalidation (PSI) - Zero Length Read (ZLR) - Caching Mode (CM) - Protected High/Low-Memory Region (PHMR/PLMR) - Required Write-Buffer Flushing (RWBF) - Advanced Fault Logging (AFL) - RID-PASID Support (RPS) - Scalable Mode Page Walk Coherency (SMPWC) - First Level Translation Support (FLTS) - Second Level Translation Support (SLTS) - No Write Flag Support (NWFS) - Second Level Accessed/Dirty Support (SLADS) - Virtual Command Support (VCS) - Scalable Mode Translation Support (SMTS) - Device TLB Invalidation Throttle (DIT) - Page Drain Support (PDS) - Process Address Space ID Support (PASID) - Extended Accessed Flag Support (EAFS) - Supervisor Request Support (SRS) - Execute Request Support (ERS) - Page Request Support (PRS) - Nested Translation Support (NEST) - Snoop Control (SC) - Pass Through (PT) - Device TLB Support (DT) - Queued Invalidation (QI) - Page walk Coherency (C) Set capability to the lowest supported when below features are mismatched: - Maximum Address Mask Value (MAMV) - Number of Fault Recording Registers (NFR) - Second Level Large Page Support (SLLPS) - Fault Recording Offset (FRO) - Maximum Guest Address Width (MGAW) - Supported Adjusted Guest Address Width (SAGAW) - Number of Domains supported (NDOMS) - Pasid Size Supported (PSS) - Maximum Handle Mask Value (MHMV) - IOTLB Register Offset (IRO) Signed-off-by: Kyung Min Park <kyung.min.park@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210130184452.31711-1-kyung.min.park@intel.com Link: https://lore.kernel.org/r/20210204014401.2846425-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-04iommu/vt-d: Fix 'physical' typosBjorn Helgaas
Fix misspellings of "physical". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/linux-iommu/20210126211738.2920789-1-helgaas@kernel.org Link: https://lore.kernel.org/r/20210204014401.2846425-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-04PM / devfreq: Cache OPP table reference in devfreqSaravana Kannan
The OPP table can be used often in devfreq. Trying to get it each time can be expensive, so cache it in the devfreq struct. Signed-off-by: Saravana Kannan <saravanak@google.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Added a blank line ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04OPP: Add function to look up required OPP's for a given OPPSaravana Kannan
Add a function that allows looking up required OPPs given a source OPP table, destination OPP table and the source OPP. Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Rearranged code, fixed return errors ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04KVM: x86/mmu: Use an rwlock for the x86 MMUBen Gardon
Add a read / write lock to be used in place of the MMU spinlock on x86. The rwlock will enable the TDP MMU to handle page faults, and other operations in parallel in future commits. Reviewed-by: Peter Feiner <pfeiner@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-19-bgardon@google.com> [Introduce virt/kvm/mmu_lock.h - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04sched: Add cond_resched_rwlockBen Gardon
Safely rescheduling while holding a spin lock is essential for keeping long running kernel operations running smoothly. Add the facility to cond_resched rwlocks. CC: Ingo Molnar <mingo@redhat.com> CC: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-9-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04sched: Add needbreak for rwlocksBen Gardon
Contention awareness while holding a spin lock is essential for reducing latency when long running kernel operations can hold that lock. Add the same contention detection interface for read/write spin locks. CC: Ingo Molnar <mingo@redhat.com> CC: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-8-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04locking/rwlocks: Add contention detection for rwlocksBen Gardon
rwlocks do not currently have any facility to detect contention like spinlocks do. In order to allow users of rwlocks to better manage latency, add contention detection for queued rwlocks. CC: Ingo Molnar <mingo@redhat.com> CC: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210202185734.1680553-7-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04KVM/SVM: add support for SEV attestation commandBrijesh Singh
The SEV FW version >= 0.23 added a new command that can be used to query the attestation report containing the SHA-256 digest of the guest memory encrypted through the KVM_SEV_LAUNCH_UPDATE_{DATA, VMSA} commands and sign the report with the Platform Endorsement Key (PEK). See the SEV FW API spec section 6.8 for more details. Note there already exist a command (KVM_SEV_LAUNCH_MEASURE) that can be used to get the SHA-256 digest. The main difference between the KVM_SEV_LAUNCH_MEASURE and KVM_SEV_ATTESTATION_REPORT is that the latter can be called while the guest is running and the measurement value is signed with PEK. Cc: James Bottomley <jejb@linux.ibm.com> Cc: Tom Lendacky <Thomas.Lendacky@amd.com> Cc: David Rientjes <rientjes@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: John Allen <john.allen@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: David Rientjes <rientjes@google.com> Tested-by: James Bottomley <jejb@linux.ibm.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Message-Id: <20210104151749.30248-1-brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04ACPI: Add support for native USB4 control _OSCMika Westerberg
ACPI 6.4 introduced a new _OSC capability that is used negotiate native connection manager support. Connection manager is the entity that is responsible for tunneling over the USB4 fabric. If the platform rejects the native access then firmware based connection manager is used. The new _OSC also includes a set of bits that can be used to disable certain tunnel types such as PCIe for security reasons for instance. This implements the new USB4 _OSC so that we try to negotiate native USB4 support if the Thunderbolt/USB4 (CONFIG_USB4) driver is enabled. Drivers can determine what was negotiated by checking two new variables exposed in this patch. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-04thunderbolt: Add support for PCIe tunneling disabled (SL5)Mika Westerberg
Recent Intel Thunderbolt firmware connection manager has support for another security level, SL5, that disables PCIe tunneling. This option can be turned on from the BIOS. When this is set the driver exposes a new security level "nopcie" to the userspace and hides the authorized attribute under connected devices. While there we also hide it when "dponly" security level is enabled since it is not really usable in that case anyway. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
2021-02-04usb: pd: Reland VDO definitions of PD2.0Kyle Tso
Reland VDO definitions of PD Revision 2.0 as they are still used in PD2.0 products. Fixes: 0e1d6f55a12e ("usb: pd: Update VDO definitions") Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210204005036.1555294-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03ethtool: Get link mode in use instead of speed and duplex parametersDanielle Ratson
Currently, when user space queries the link's parameters, as speed and duplex, each parameter is passed from the driver to ethtool. Instead, get the link mode bit in use, and derive each of the parameters from it in ethtool. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03ethtool: Extend link modes settings uAPI with lanesDanielle Ratson
Currently, when auto negotiation is on, the user can advertise all the linkmodes which correspond to a specific speed, but does not have a similar selector for the number of lanes. This is significant when a specific speed can be achieved using different number of lanes. For example, 2x50 or 4x25. Add 'ETHTOOL_A_LINKMODES_LANES' attribute and expand 'struct ethtool_link_settings' with lanes field in order to implement a new lanes-selector that will enable the user to advertise a specific number of lanes as well. When auto negotiation is off, lanes parameter can be forced only if the driver supports it. Add a capability bit in 'struct ethtool_ops' that allows ethtool know if the driver can handle the lanes parameter when auto negotiation is off, so if it does not, an error message will be returned when trying to set lanes. Example: $ ethtool -s swp1 lanes 4 $ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseSR/Full 50000baseCR2/Full 100000baseSR4/Full 100000baseCR4/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 100000baseSR4/Full 100000baseCR4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Auto-negotiation: on Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Link detected: no Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03net: usb: cdc_ncm: use new API for bh taskletEmil Renner Berthing
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") It is unfortunate that we need to add a pointer to the driver context to get back to the usbnet device, but the space will be reclaimed once there are no more users of the old API left and we can remove the data value and flag from the tasklet struct. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210130234637.26505-1-kernel@esmil.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03parser: add unsigned int parserBingJing Chang
Will be used by fs parsing options Link: https://lore.kernel.org/r/20210129045242.10268-1-bingjingc@synology.com Reviewed-by: Robbie Ko<robbieko@synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-02-03Merge tag 'trace-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Initialize tracing-graph-pause at task creation, not start of function tracing, to avoid corrupting the pause counter. - Set "pause-on-trace" for latency tracers as that option breaks their output (regression). - Fix the wrong error return for setting kretprobes on future modules (before they are loaded). - Fix re-registering the same kretprobe. - Add missing value check for added RCU variable reload. * tag 'trace-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Fix race between tracing and removing tracepoint kretprobe: Avoid re-registration of the same kretprobe earlier tracing/kprobe: Fix to support kretprobe events on unloaded modules tracing: Use pause-on-trace with the latency tracers fgraph: Initialize tracing_graph_pause at task creation
2021-02-03usb: pd: Update VDO definitionsKyle Tso
"PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10" introduces several changes regarding the ID Header VDO and the Product Type VDOs. Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210202161733.932215-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03Merge tag 'tee-housekeeping-for-v5.12' of ↵Arnd Bergmann
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers TEE subsystem housekeeping - Fixes some comment typos in header files - Updates to use flexible-array member instead of zero-length array - Syncs internal OP-TEE headers with the ones from OP-TEE OS * tag 'tee-housekeeping-for-v5.12' of git://git.linaro.org:/people/jens.wiklander/linux-tee: optee: sync OP-TEE headers tee: optee: fix 'physical' typos drivers: optee: use flexible-array member instead of zero-length array tee: fix some comment typos in header files Link: https://lore.kernel.org/r/20210203120742.GA3624453@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02tracing: Remove NULL check from current in tracing_generic_entry_update().Sebastian Andrzej Siewior
I can't imagine when or why `current' would return a NULL pointer. This check was added in commit 72829bc3d63cd ("ftrace: move enums to ftrace.h and make helper function global") but it doesn't give me hint why it was needed. Assume `current' never returns a NULL pointer and remove the check. Link: https://lkml.kernel.org/r/20210125194511.3924915-5-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-02tracing: Inline tracing_gen_ctx_flags()Sebastian Andrzej Siewior
Inline tracing_gen_ctx_flags(). This allows to have one ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT. This requires to move `trace_flag_type' so tracing_gen_ctx_flags() can use it. Link: https://lkml.kernel.org/r/20210125194511.3924915-3-bigeasy@linutronix.de Suggested-by: Steven Rostedt <rostedt@goodmis.org> Link: https://lkml.kernel.org/r/20210125140323.6b1ff20c@gandalf.local.home Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-02tracing: Merge irqflags + preempt counter.Sebastian Andrzej Siewior
The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-02tracing: Add printf attribute to log functionTom Rix
Attributing the function allows the compiler to more thoroughly check the use of the function with -Wformat and similar flags. Link: https://lkml.kernel.org/r/20201221162715.3757291-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-02Merge tag 'v5.11-next-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers pm-domains: - add support for MT8167 - add support for regulator needed by a PM domain - make error message in deferred probe case better cmdq-helper: - remove arch specific flush function, use mailbox rx_callback instead * tag 'v5.11-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: pm-domains: Don't print an error if child domain is deferred soc: mediatek: pm-domains: Add domain regulator supply dt-bindings: power: Add domain regulator supply soc: mediatek: cmdq: Remove cmdq_pkt_flush() soc: mediatek: pm-domains: Add support for mt8167 dt-bindings: power: Add MT8167 power domains Link: https://lore.kernel.org/r/5faa52c2-0ddb-b809-7444-ce6f6ff6d8ad@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-12 14:15:26 +0000