| Age | Commit message (Collapse) | Author |
|---|
|
The PCI hotplug core keeps a list of all registered slots. Its sole
purpose is to WARN() on slot removal if another slot is using the same
name.
But this can never happen because already on slot creation, an error is
returned and multiple messages are emitted if a slot's name is
duplicated:
pci_hp_register()
__pci_hp_register()
__pci_hp_initialize()
pci_create_slot()
kobject_init_and_add()
kobject_add_varg()
kobject_add_internal()
create_dir()
sysfs_create_dir_ns()
kernfs_create_dir_ns()
sysfs_warn_dup()
pr_warn("cannot create duplicate filename ...")
pr_err("%s failed for %s with -EEXIST, ...");
Drop the superfluous list.
Link: https://lore.kernel.org/r/603735bc50eb370bc7f1c358441ac671360bab25.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When two drivers don't support all the same profiles the legacy interface
only exports the common profiles.
This causes problems for cases where one driver uses low-power but another
uses quiet because the result is that neither is exported to sysfs.
To allow two drivers to disagree, add support for "hidden choices".
Hidden choices are platform profiles that a driver supports to be
compatible with the platform profile of another driver.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://lore.kernel.org/platform-driver-x86/e64b771e-3255-42ad-9257-5b8fc6c24ac9@gmx.de/T/#mc068042dd29df36c16c8af92664860fc4763974b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-4-brgerst@gmail.com
|
|
Add a subsection to the percpu data for frequently accessed variables
that should remain cached on each processor. These varables should not
be accessed from other processors to avoid cacheline bouncing.
This will replace the pcpu_hot struct on x86, and open up similar
functionality to other architectures and the kernel core.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-2-brgerst@gmail.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
pipe_readable(), pipe_writable(), and pipe_poll() can read "pipe->head"
and "pipe->tail" outside of "pipe->mutex" critical section. When the
head and the tail are read individually in that order, there is a window
for interruption between the two reads in which both the head and the
tail can be updated by concurrent readers and writers.
One of the problematic scenarios observed with hackbench running
multiple groups on a large server on a particular pipe inode is as
follows:
pipe->head = 36
pipe->tail = 36
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wakes up: pipe not full*
hackbench-118762 [057] ..... 1029.550548: pipe_write: head: 36 -> 37 [tail: 36]
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next reader 118740*
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next writer 118768*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: *writer wakes up*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: head = READ_ONCE(pipe->head) [37]
... CPU 206 interrupted (exact wakeup was not traced but 118768 did read head at 37 in traces)
hackbench-118740 [057] ..... 1029.550558: pipe_read: *reader wakes up: pipe is not empty*
hackbench-118740 [057] ..... 1029.550558: pipe_read: tail: 36 -> 37 [head = 37]
hackbench-118740 [057] ..... 1029.550559: pipe_read: *pipe is empty; wakeup writer 118768*
hackbench-118740 [057] ..... 1029.550559: pipe_read: *sleeps*
hackbench-118766 [185] ..... 1029.550592: pipe_write: *New writer comes in*
hackbench-118766 [185] ..... 1029.550592: pipe_write: head: 37 -> 38 [tail: 37]
hackbench-118766 [185] ..... 1029.550592: pipe_write: *wakes up reader 118766*
hackbench-118740 [185] ..... 1029.550598: pipe_read: *reader wakes up; pipe not empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: tail: 37 -> 38 [head: 38]
hackbench-118740 [185] ..... 1029.550599: pipe_read: *pipe is empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: *reader sleeps; wakeup writer 118768*
... CPU 206 switches back to writer
hackbench-118768 [206] ..... 1029.550601: pipe_write: tail = READ_ONCE(pipe->tail) [38]
hackbench-118768 [206] ..... 1029.550601: pipe_write: pipe_full()? (u32)(37 - 38) >= 16? Yes
hackbench-118768 [206] ..... 1029.550601: pipe_write: *writer goes back to sleep*
[ Tasks 118740 and 118768 can then indefinitely wait on each other. ]
The unsigned arithmetic in pipe_occupancy() wraps around when
"pipe->tail > pipe->head" leading to pipe_full() returning true despite
the pipe being empty.
The case of genuine wraparound of "pipe->head" is handled since pipe
buffer has data allowing readers to make progress until the pipe->tail
wraps too after which the reader will wakeup a sleeping writer, however,
mistaking the pipe to be full when it is in fact empty can lead to
readers and writers waiting on each other indefinitely.
This issue became more problematic and surfaced as a hang in hackbench
after the optimization in commit aaec5a95d596 ("pipe_read: don't wake up
the writer if the pipe is still full") significantly reduced the number
of spurious wakeups of writers that had previously helped mask the
issue.
To avoid missing any updates between the reads of "pipe->head" and
"pipe->write", unionize the two with a single unsigned long
"pipe->head_tail" member that can be loaded atomically.
Using "pipe->head_tail" to read the head and the tail ensures the
lockless checks do not miss any updates to the head or the tail and
since those two are only updated under "pipe->mutex", it ensures that
the head is always ahead of, or equal to the tail resulting in correct
calculations.
[ prateek: commit log, testing on x86 platforms. ]
Reported-and-debugged-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Closes: https://lore.kernel.org/lkml/e813814e-7094-4673-bc69-731af065a0eb@amd.com/
Reported-by: Alexey Gladkov <legion@kernel.org>
Closes: https://lore.kernel.org/all/Z8Wn0nTvevLRG_4m@example.org/
Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Coresight TMC Control Unit hosts miscellaneous configuration registers
which control various features related to TMC ETR sink.
Based on the trace ID, which is programmed in the related CTCU ATID
register of a specific ETR, trace data with that trace ID gets into
the ETR buffer, while other trace data gets dropped.
Enabling source device sets one bit of the ATID register based on
source device's trace ID.
Disabling source device resets the bit according to the source
device's trace ID.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-10-quic_jiegan@quicinc.com
|
|
The source device can directly read the trace ID from the coresight_path
which result in etm_read_alloc_trace_id and etm4_read_alloc_trace_id being
deleted.
Co-developed-by: James Clark <james.clark@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-7-quic_jiegan@quicinc.com
|
|
Introduce a new strcuture, 'struct coresight_path', to store the data that
utilized by the devices in the path. The coresight_path will be built/released
by coresight_build_path/coresight_release_path functions.
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-5-quic_jiegan@quicinc.com
|
|
This compatibility wrapper has no callers left, so remove it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
All callers have now been converted to use folios, so remove this
compatibility wrapper.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The last caller has been converted to call folio_wait_stable(), so
we can remove this wrapper.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a function to decode argument types with the help of BTF. Will
be used to display arguments in the function and function graph
tracer.
It can only handle simply arguments and up to FTRACE_REGS_MAX_ARGS number
of arguments. When it hits a max, it will print ", ...":
page_to_skb(vi=0xffff8d53842dc980, rq=0xffff8d53843a0800, page=0xfffffc2e04337c00, offset=6160, len=64, truesize=1536, ...)
And if it hits an argument that is not recognized, it will print the raw
value and the type of argument it is:
make_vfsuid(idmap=0xffffffff87f99db8, fs_userns=0xffffffff87e543c0, kuid=0x0 (STRUCT))
__pti_set_user_pgtbl(pgdp=0xffff8d5384ab47f8, pgd=0x110e74067 (STRUCT))
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.639418500@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add 'trace_id' function pointer in coresight_ops. It's responsible for retrieving
the device's trace ID.
Co-developed-by: James Clark <james.clark@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-3-quic_jiegan@quicinc.com
|
|
Add support for new APB clock-name. If the function fails
to obtain the clock with the name "apb_pclk", it will
attempt to acquire the clock with the name "apb".
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-2-quic_jiegan@quicinc.com
|
|
There are no more users of irq-davinci-cp-intc.h (da830.c doesn't use
any of its symbols). Remove the header and make the driver stop using the
config structure.
[ tglx: Mop up coding style ]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250304131815.86549-1-brgl@bgdev.pl
|
|
Merge series from patrice.chotard@foss.st.com:
This series adds SPI NOR support for STM32MP25 SoCs from STMicroelectronics.
On STM32MP25 SoCs family, an Octo Memory Manager block manages the muxing,
the memory area split, the chip select override and the time constraint
between its 2 Octo SPI children.
Due to these depedencies, this series adds support for:
- Octo Memory Manager driver (not applied for SPI).
- Octo SPI driver.
- yaml schema for Octo Memory Manager and Octo SPI drivers.
The device tree files adds Octo Memory Manager and its 2 associated Octo
SPI chidren in stm32mp251.dtsi and adds SPI NOR support in stm32mp257f-ev1
board.
|
|
It could be hard to understand why the netlink command fails. For example,
if dev->netns_immutable is set, the error is "Invalid argument".
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the host ECC fails to correct the data error of NAND device,
there's a special read for data recovery method which can be setup
by the host for the next read. There are several retry levels that
can be attempted until the lost data is recovered or definitely
assumed lost.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When describing GPIO controllers in the device tree, the ambition
of device tree to describe the hardware may require a three-cell
scheme:
gpios = <&gpio instance offset flags>;
This implements support for this scheme in the gpiolib OF core.
Drivers that want to handle multiple gpiochip instances from one
OF node need to implement a callback similar to this to
determine if a certain gpio chip is a pointer to the right
instance (pseudo-code):
struct my_gpio {
struct gpio_chip gcs[MAX_CHIPS];
};
static bool my_of_node_instance_match(struct gpio_chip *gc
unsigned int instance)
{
struct my_gpio *mg = gpiochip_get_data(gc);
if (instance >= MAX_CHIPS)
return false;
return (gc == &mg->gcs[instance]);
}
probe() {
struct my_gpio *mg;
struct gpio_chip *gc;
int i, ret;
for (i = 0; i++; i < MAX_CHIPS) {
gc = &mg->gcs[i];
/* This tells gpiolib we have several instances per node */
gc->of_gpio_n_cells = 3;
gc->of_node_instance_match = my_of_node_instance_match;
gc->base = -1;
...
ret = devm_gpiochip_add_data(dev, gc, mg);
if (ret)
return ret;
}
}
Rename the "simple" of_xlate function to "twocell" which is closer
to what it actually does.
In the device tree bindings, the provide node needs
to specify #gpio-cells = <3>; where the first cell is the instance
number:
gpios = <&gpio instance offset flags>;
Conversely ranges need to have four cells:
gpio-ranges = <&pinctrl instance gpio_offset pin_offset count>;
Reviewed-by: Alex Elder <elder@riscstar.com>
Tested-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250225-gpio-ranges-fourcell-v3-2-860382ba4713@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add size macros for 24/192/384 Kilobytes and 3/6/12/18/24 Megabytes.
With that, the x86 subsystem can avoid locally defining its own macros
for CPU cache sizes.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250304085152.51092-31-darwi@linutronix.de
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In vast majority of cases the condition determining whether the thread
can proceed is true after the first wake up.
However, even in that case the thread ends up calling into
prepare_to_wait_event() again, suffering a spurious irq + lock trip.
Then it calls into finish_wait() to unlink itself.
Note that in case of a pending signal the work done by
prepare_to_wait_event() gets ignored even without the change.
pre-check the condition after waking up instead.
Stats gathared during a kernel build:
bpftrace -e 'kprobe:prepare_to_wait_event,kprobe:finish_wait \
{ @[probe] = count(); }'
@[kprobe:finish_wait]: 392483
@[kprobe:prepare_to_wait_event]: 778690
As in calls to prepare_to_wait_event() almost double calls to
finish_wait(). This evens out with the patch.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250303230409.452687-4-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
User data is kept in a circular buffer backed by pages allocated as
needed. Only having space for one spare is still prone to having to
resort to allocation / freeing.
In my testing this decreases page allocs by 60% during a kernel build.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250303230409.452687-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In prepration for being able to unregister a PMU with existing events,
it becomes important to detach struct perf_cpu_pmu_context lifetimes
from that of struct pmu.
Notably struct perf_cpu_pmu_context embeds a struct perf_event_pmu_context
that can stay referenced until the last event goes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.760214287@infradead.org
|
|
perf_cpu_pmu_context::pmu_disable_count
Because it makes no sense to have two per-cpu allocations per pmu.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.518730578@infradead.org
|
|
Using the previously introduced perf_pmu_free() and a new IDR helper,
simplify the perf_pmu_register error paths.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.198937277@infradead.org
|
|
The error cleanup sequence in perf_event_alloc() is a subset of the
existing _free_event() function (it must of course be).
Split this out into __free_event() and simplify the error path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135517.967889521@infradead.org
|
|
Allow move_mount() to work with NULL path arguments.
Link: https://lore.kernel.org/r/20250221-brauner-open_tree-v1-8-dbcfcb98c676@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If a user calls p = kmalloc(1024); kfree(p); kfree(p); and 'p' was the
only object in the slab, we may free the slab after the first call to
kfree(). If we do, we clear PGTY_slab and the second call to kfree()
will call free_large_kmalloc(). That will leave a trace in the logs
("object pointer: 0x%p"), but otherwise proceed to free the memory,
which is likely to corrupt the page allocator's metadata.
Allocate a new page type for large kmalloc and mark the memory with it
while it's allocated. That lets us detect this double-free and return
without harming any data structures.
Reported-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Move the common DWC struct definitions, which are shared across all the
DesginWare PCIe IPs, to a new header file called 'pcie-dwc.h', so that
other users e.g., debugfs, perf and sysfs can make use of them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-2-shradha.t@samsung.com
[kwilczynski: commit log, tidy up the new header file]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Many of the fields in struct bio_integrity_payload are only needed for
the default integrity buffer in the block layer, and the variable
sized array at the end of the structure makes it very hard to embed
into caller allocated structures.
Reduce struct bio_integrity_payload to the minimal structure needed in
common code and create two separate containing structures for the
automatically generated payload and the caller allocated payload.
The latter is a simple wrapper for struct bio_integrity_payload and
the bvecs, while the former contains the additional fields moved out
of struct bio_integrity_payload.
Always use a dedicated mempool for automatic integrity metadata
instead of depending on bio_set that is submitter controlled and thus
often doesn't have the mempool initialized and stop using mempools for
the submitter buffers as they aren't in the NOIO I/O submission path
where we need to guarantee forward progress.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20250225154449.422989-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rearrange misplaced functions in sorted order.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: R Sundar <prosunofficial@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20241119021719.7659-2-prosunofficial@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Since these functions handle moving between C strings and non-C strings,
they should check for the appropriate presence/lack of the nonstring
attribute on arguments.
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In preparation for adding more type checking to the memtostr/strtomem*()
helpers, introduce the ability to check for the "nonstring" attribute.
This is the reverse of what was added to strscpy*() in commit 559048d156ff
("string: Check for "nonstring" attribute on strscpy() arguments").
Note that __annotated() must be explicitly tested for, as GCC added
__builtin_has_attribute() after it added the "nonstring" attribute. Do
so here to avoid the !__annotated() test triggering build failures
when __builtin_has_attribute() was missing but __nonstring was defined.
(I've opted to squash this fix into this patch so we don't end up with
a possible bisection target that would leave the kernel unbuildable.)
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Michael Kelley <mhklinux@outlook.com>
Closes: https://lore.kernel.org/all/adbe8dd1-a725-4811-ae7e-76fe770cf096@linux.vnet.ibm.com/
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Issue Number 1.6 of the Arm SMC Calling Convention introduces an optional
SOC_ID name string. If implemented, point the 'machine' field of the SoC
Device Attributes at this string so that it will appear under
/sys/bus/soc/devices/soc0/machine.
On Arm SMC compliant SoCs, this will allow things like 'lscpu' to
eventually get a SoC provider model name from there rather than each
tool/utility needing to get a possibly inconsistent, obsolete, or incorrect
model/machine name from its own hardcoded model/machine name table.
Signed-off-by: Paul Benoit <paul@os.amperecomputing.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Message-Id: <20250219005932.3466-1-paul@os.amperecomputing.com>
(sudeep.holla: Dropped regsize variable and used 8 instead as Mark suggested)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Rename the async_in_progress field in struct dev_pm_info to
work_in_progress as after subsequent changes it will mean work in
general rather than just async work.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3338693.aeNJFYEL58@rjwysocki.net
|
|
The comment in pm_runtime_blocked() is acutally wrong: power.last_status
is not a bit field. Its data type is an enum and so one can reasonably
assume that partial updates of it will not be observed.
Accordingly, pm_runtime_blocked() can be converted to a static inline
function and the related locking overhead can be eliminated, so long
as it is only used in system suspend/resume code paths because
power.last_status is not expected to be updated concurrently while
that code is running.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1923449.tdWV9SEqCh@rjwysocki.net
|
|
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b95e ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
|
|
This driver implements support for the SPI-NAND mode of QCOM NAND Flash
Interface as a SPI-MEM controller with pipelined ECC capability.
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-3-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove needless 'return' in the following void APIs:
__pm_wakeup_event()
pm_wakeup_event()
pm_wakeup_hard_event()
Since both the API and callee involved are void functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20250221-rmv_return-v1-14-cc8dff275827@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add an optimization (on top of previous changes) to avoid calling
pm_runtime_blocked(), which involves acquiring the device's PM spinlock,
for devices with no PM callbacks and runtime PM "blocked".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2978873.e9J7NaK4W3@rjwysocki.net
|
|
On architectures where ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
is not selected, sync_core_before_usermode() is a no-op.
In membarrier_mm_sync_core_before_usermode() the compiler does not
eliminate redundant branches and load of mm->membarrier_state
for this case as the atomic_read() cannot be optimized away.
Here's a snippet of the code generated for finish_task_switch() on powerpc
prior to this change:
1b786c: ld r26,2624(r30) # mm = rq->prev_mm;
.......
1b78c8: cmpdi cr7,r26,0
1b78cc: beq cr7,1b78e4 <finish_task_switch+0xd0>
1b78d0: ld r9,2312(r13) # current
1b78d4: ld r9,1888(r9) # current->mm
1b78d8: cmpd cr7,r26,r9
1b78dc: beq cr7,1b7a70 <finish_task_switch+0x25c>
1b78e0: hwsync
1b78e4: cmplwi cr7,r27,128
.......
1b7a70: lwz r9,176(r26) # atomic_read(&mm->membarrier_state)
1b7a74: b 1b78e0 <finish_task_switch+0xcc>
This was found while analyzing "perf c2c" reports on kernels prior
to commit c1753fd02a00 ("mm: move mm_count into its own cache line")
where mm_count was false sharing with membarrier_state.
There is a minor improvement in the size of finish_task_switch().
The following are results from bloat-o-meter for ppc64le:
GCC 7.5.0
---------
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-32 (-32)
Function old new delta
finish_task_switch 884 852 -32
GCC 12.2.1
----------
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-32 (-32)
Function old new delta
finish_task_switch.isra 852 820 -32
LLVM 17.0.6
-----------
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-36 (-36)
Function old new delta
rt_mutex_schedule 120 104 -16
finish_task_switch 792 772 -20
Results on aarch64:
GCC 14.1.1
----------
add/remove: 0/2 grow/shrink: 1/1 up/down: 4/-60 (-56)
Function old new delta
get_nohz_timer_target 352 356 +4
e843419@0b02_0000d7e7_408 8 - -8
e843419@01bb_000021d2_868 8 - -8
finish_task_switch.isra 592 548 -44
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20250303060457.531293-1-nysal@linux.ibm.com
|
|
otg_ulpi_create() has been unused since 2022's
commit 8ca79aaad8be ("ARM: pxa: remove unused pxa3xx-ulpi")
Remove it.
The devm_ variant is still used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250223160602.91916-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are three variants of which Huawei released the first two
simultaneously.
Huawei Matebook E Go LTE(sc8180x), codename seems to be gaokun2.
Huawei Matebook E Go(sc8280xp@3.0GHz), codename must be gaokun3. (see [1])
Huawei Matebook E Go 2023(sc8280xp@2.69GHz), codename should be also gaokun3.
Adding support for the latter two variants for now, this driver should
also work for the sc8180x variant according to acpi table files, but I
don't have the device to test yet.
Different from other Qualcomm Snapdragon sc8280xp based machines, the
Huawei Matebook E Go uses an embedded controller while others use
a system called PMIC GLink. This embedded controller can be used to
perform a set of various functions, including, but not limited to:
- Battery and charger monitoring;
- Charge control and smart charge;
- Fn_lock settings;
- Tablet lid status;
- Temperature sensors;
- USB Type-C notifications (ports orientation, DP alt mode HPD);
- USB Type-C PD (according to observation, up to 48w).
Add a driver for the EC which creates devices for UCSI and power supply
devices.
This driver is inspired by the following drivers:
drivers/platform/arm64/acer-aspire1-ec.c
drivers/platform/arm64/lenovo-yoga-c630.c
drivers/platform/x86/huawei-wmi.c
Also thanks for reviewers' working. They have made this patch improve
a lot.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=219645
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250214180656.28599-3-mitltlatltl@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
We now have setter callbacks that allow us to indicate success or
failure using the integer return value. Deprecate the older callbacks so
that no new code is tempted to use them.
Link: https://lore.kernel.org/r/20250227083748.22400-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
