| Age | Commit message (Collapse) | Author |
|---|
|
for-6.2/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.2
- support some passthrough commands without CAP_SYS_ADMIN
(Kanchan Joshi)
- refactor PCIe probing and reset (Christoph Hellwig)
- various fabrics authentication fixes and improvements (Sagi Grimberg)
- avoid fallback to sequential scan due to transient issues
(Uday Shankar)
- implement support for the DEAC bit in Write Zeroes (Christoph Hellwig)
- allow overriding the IEEE OUI and firmware revision in configfs for
nvmet (Aleksandr Miloserdov)
- force reconnect when number of queue changes in nvmet (Daniel Wagner)
- minor fixes and improvements (Uros Bizjak, Joel Granados,
Sagi Grimberg, Christoph Hellwig, Christophe JAILLET)"
* tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme: (45 commits)
nvmet: expose firmware revision to configfs
nvmet: expose IEEE OUI to configfs
nvme: rename the queue quiescing helpers
nvmet: fix a memory leak in nvmet_auth_set_key
nvme: return err on nvme_init_non_mdts_limits fail
nvme: avoid fallback to sequential scan due to transient issues
nvme-rdma: stop auth work after tearing down queues in error recovery
nvme-tcp: stop auth work after tearing down queues in error recovery
nvme-auth: have dhchap_auth_work wait for queues auth to complete
nvme-auth: remove redundant auth_work flush
nvme-auth: convert dhchap_auth_list to an array
nvme-auth: check chap ctrl_key once constructed
nvme-auth: no need to reset chap contexts on re-authentication
nvme-auth: remove redundant deallocations
nvme-auth: clear sensitive info right after authentication completes
nvme-auth: guarantee dhchap buffers under memory pressure
nvme-auth: don't keep long lived 4k dhchap buffer
nvme-auth: remove redundant if statement
nvme-auth: don't override ctrl keys before validation
nvme-auth: don't ignore key generation failures when initializing ctrl keys
...
|
|
Introduce reset parameter to mtk_wed_tx_ring_setup signature.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update mtk_wed_stop routine and rename old mtk_wed_stop() to
mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet
Dispatcher reset support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Export
of_get_mac_addr_nvmem()
and rename it to
of_get_mac_address_nvmem()
in order to fit the convention followed by the existing exported helpers
of the same kind.
This way, OF compatible drivers using eg. fwnode_get_mac_address() can
do a direct call to it instead of calling of_get_mac_address() just for
the nvmem step, avoiding to repeat an expensive DT lookup which has
already been done once.
Eventually, fwnode_get_mac_address() should probably be updated to
perform the nvmem lookup directly, but as of today, nvmem cells seem not
to be supported by ACPI yet which would defeat this kind of extension.
Suggested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.2-2
* Enable PWM feature on Intel pin control IPs
The following is an automated git shortlog grouped by driver:
intel:
- Enumerate PWM device when community has a capability
pwm:
- lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
- lpss: Allow other drivers to enable PWM LPSS
- lpss: Include headers we are the direct user of
- lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
- Add a stub for devm_pwmchip_add()
|
|
Clean up after commit 22700f3c6df5 ("SUNRPC: Improve ordering of
transport processing").
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
morev vs. more.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20221105115401.21592-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The Hyper-V framebuffer code registers a panic notifier in order
to try updating its fbdev if the kernel crashed. The notifier
callback is straightforward, but it calls the vmbus_sendpacket()
routine eventually, and such function takes a spinlock for the
ring buffer operations.
Panic path runs in atomic context, with local interrupts and
preemption disabled, and all secondary CPUs shutdown. That said,
taking a spinlock might cause a lockup if a secondary CPU was
disabled with such lock taken. Fix it here by checking if the
ring buffer spinlock is busy on Hyper-V framebuffer panic notifier;
if so, bail-out avoiding the potential lockup scenario.
Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Tested-by: Fabio A M Martins <fabiomirmar@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220819221731.480795-10-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
All wed versions should enable the wcid overwritten feature,
since the wcid size is controlled by the wlan driver.
Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2022-11-24
This series provides bug fixes to mlx5 driver.
Focusing on error handling and proper memory management in mlx5, in
general and in the newly added macsec module.
I still have few fixes left in my queue and I hope those will be the
last ones for mlx5 for this cycle.
Please pull and let me know if there is any problem.
Happy thanksgiving.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
POSIX typically only refreshes the user's supplementary group
information upon login. Since NFS servers may often refresh their
concept of the user supplementary group membership at their own cadence,
it is possible for the NFS client's access cache to become stale due to
the user's group membership changing on the server after the user has
already logged in on the client.
While it is reasonable to expect that such group membership changes are
rare, and that we do not want to optimise the cache to accommodate them,
it is also not unreasonable for the user to expect that if they log out
and log back in again, that the staleness would clear up.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
SLAB_RECLAIM_ACCOUNT caches allocate their slab pages with
__GFP_RECLAIMABLE and can help against fragmentation by grouping pages
by mobility, but on tiny systems mobility grouping is likely disabled
anyway and ignoring SLAB_RECLAIM_ACCOUNT might instead lead to merging
of caches that are made incompatible just by the flag.
Thus with CONFIG_SLUB_TINY, make SLAB_RECLAIM_ACCOUNT ineffective.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
Distinguishing kmalloc(__GFP_RECLAIMABLE) can help against fragmentation
by grouping pages by mobility, but on tiny systems the extra memory
overhead of separate set of kmalloc-rcl caches will probably be worse,
and mobility grouping likely disabled anyway.
Thus with CONFIG_SLUB_TINY, don't create kmalloc-rcl caches and use the
regular ones.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
Currently SLUB enables its sysfs support depending unconditionally on
the general CONFIG_SYSFS setting. To reduce the configuration
combination space, make CONFIG_SLUB_TINY disable SLUB's sysfs support by
reusing the existing SLAB_SUPPORTS_SYSFS define. It is unlikely that
real tiny systems would combine CONFIG_SLUB_TINY with CONFIG_SYSFS, but
a randconfig might.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
With CONFIG_HARDENED_USERCOPY not enabled, there are no
__check_heap_object() checks happening that would use the struct
kmem_cache useroffset and usersize fields. Yet the fields are still
initialized, preventing merging of otherwise compatible caches.
Also the fields contribute to struct kmem_cache size unnecessarily when
unused. Thus #ifdef them out completely when CONFIG_HARDENED_USERCOPY is
disabled. In kmem_dump_obj() print object_size instead of usersize, as
that's actually the intention.
In a quick virtme boot test, this has reduced the number of caches in
/proc/slabinfo from 131 to 111.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
Pull vfs fix from Al Viro:
"Amir's copy_file_range() fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: fix copy_file_range() averts filesystem freeze protection
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for Xen emulation. While nobody should be enabling it in the
kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
- Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a
use-after-free when it disables virtualization extensions. While
downgrading the panic to a WARN is quite easy, the full fix is a
bit more laborious; there are also tests. This is the bulk of the
pull request.
- Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
- Obey changes to the kvm.halt_poll_ns module parameter in VMs not
using KVM_CAP_HALT_POLL, restoring behavior from before the
introduction of the capability"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Update gfn_to_pfn_cache khva when it moves within the same page
KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
KVM: x86/xen: Validate port number in SCHEDOP_poll
KVM: x86/mmu: Fix race condition in direct_page_fault
KVM: x86: remove exit_int_info warning in svm_handle_exit
KVM: selftests: add svm part to triple_fault_test
KVM: x86: allow L1 to not intercept triple fault
kvm: selftests: add svm nested shutdown test
KVM: selftests: move idt_entry to header
KVM: x86: forcibly leave nested mode on vCPU reset
KVM: x86: add kvm_leave_nested
KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
KVM: x86: nSVM: leave nested mode on vCPU free
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
KVM: Cap vcpu->halt_poll_ns before halting rather than after
|
|
Merge series from Eddie James <eajames@linux.ibm.com>:
The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.
This branch just has the regmap change so it can be shared with the FSI
code.
|
|
Merge series from Maarten Zanders <maarten.zanders@mind.be>:
A collection of fixes and improvements for the adau1372 driver.
|
|
INT_LIMIT() tries to do what type_max() does, except that type_max()
doesn't rely upon undefined behaviour[*], might as well use type_max()
instead.
[*] if T is an N-bit signed integer type, the maximal value in T is
pow(2, N - 1) - 1, all right, but naive expression for that value
ends up with a couple of wraparounds and as usual for wraparounds
in signed types, that's an undefined behaviour. type_max() takes
care to avoid those...
Caught-by: UBSAN
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add regmap support for the FSI bus.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20221102205148.1334459-2-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Linux 6.1-rc4 which should get my CI working on RPi3s again.
|
|
Linux 6.1-rc4 which should get my CI working on RPi3s again.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
issues.
There have been a lot of hotfixes this cycle, and this is quite a
large batch given how far we are into the -rc cycle. Presumably a
reflection of the unusually large amount of MM material which went
into 6.1-rc1"
* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
test_kprobes: fix implicit declaration error of test_kprobes
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
swapfile: fix soft lockup in scan_swap_map_slots
hugetlb: fix __prep_compound_gigantic_page page flag setting
kfence: fix stack trace pruning
proc/meminfo: fix spacing in SecPageTables
mm: multi-gen LRU: retry folios written back while isolated
mailmap: update email address for Satya Priya
mm/migrate_device: return number of migrating pages in args->cpages
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
MAINTAINERS: update Alex Hung's email address
mailmap: update Alex Hung's email address
mm: mmap: fix documentation for vma_mas_szero
mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
mm/memory: return vm_fault_t result from migrate_to_ram() callback
mm: correctly charge compressed memory to its memcg
ipc/shm: call underlying open/close vm_ops
gcov: clang: fix the buffer overflow issue
...
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
On Tegra234, engines that are programmed through Host1x channels can
be attached to either the NISO0 or NISO1 SMMU. Because of that, when
selecting a context device to use with an engine, we need to select
one that is also attached to the same SMMU.
Add a parameter to host1x_memory_context_alloc to specify which device
we are allocating a context for, and use it to pick an appropriate
context device.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
[treding@nvidia.com: update !IOMMU_API stub signature]
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
The code in drivers/soundwire/intel_init.c is hardware-dependent and the
code does not apply to new generations starting with MeteorLake. Refactor
and clean-up the code to make this intel_init.c hardware-agnostic and
move all hardware-dependencies in the SOF driver using chip descriptors.
|
|
Multishot ops cannot use the compl_reqs list as the request must stay in
the poll list, but that means they need to run each completion without
benefiting from batching.
Here introduce batching infrastructure for only small (ie 16 byte)
CQEs. This restriction is ok because there are no use cases posting 32
byte CQEs.
In the ring keep a batch of up to 16 posted results, and flush in the same
way as compl_reqs.
16 was chosen through experimentation on a microbenchmark ([1]), as well
as trying not to increase the size of the ring too much. This increases
the size to 1472 bytes from 1216.
[1]: https://github.com/DylanZA/liburing/commit/9ac66b36bcf4477bfafeff1c5f107896b7ae31cf
Run with $ make -j && ./benchmark/reg.b -s 1 -t 2000 -r 10
Gives results:
baseline 8309 k/s
8 18807 k/s
16 19338 k/s
32 20134 k/s
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-5-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().
To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.
Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.
Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.
This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.
Fixes: 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Remove the pointless keying argument and associated enum and pass the
fill_super callback and a "bool reconf" instead. Also mark the function
static given that there are no users outside of super.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
argument)
Don't bother with pointless macros - we are not sharing it with aout coredumps
anymore. Just convert the underlying functions to the same arguments (nobody
uses regs, actually) and call them elf_core_copy_task_fpregs(). And unexport
the entire bunch, while we are at it.
[added missing includes in arch/{csky,m68k,um}/kernel/process.c to avoid extra
warnings about the lack of externs getting added to huge piles for those
files. Pointless, but...]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add two kfunc's bpf_rcu_read_lock() and bpf_rcu_read_unlock(). These two kfunc's
can be used for all program types. The following is an example about how
rcu pointer are used w.r.t. bpf_rcu_read_lock()/bpf_rcu_read_unlock().
struct task_struct {
...
struct task_struct *last_wakee;
struct task_struct __rcu *real_parent;
...
};
Let us say prog does 'task = bpf_get_current_task_btf()' to get a
'task' pointer. The basic rules are:
- 'real_parent = task->real_parent' should be inside bpf_rcu_read_lock
region. This is to simulate rcu_dereference() operation. The
'real_parent' is marked as MEM_RCU only if (1). task->real_parent is
inside bpf_rcu_read_lock region, and (2). task is a trusted ptr. So
MEM_RCU marked ptr can be 'trusted' inside the bpf_rcu_read_lock region.
- 'last_wakee = real_parent->last_wakee' should be inside bpf_rcu_read_lock
region since it tries to access rcu protected memory.
- the ptr 'last_wakee' will be marked as PTR_UNTRUSTED since in general
it is not clear whether the object pointed by 'last_wakee' is valid or
not even inside bpf_rcu_read_lock region.
The verifier will reset all rcu pointer register states to untrusted
at bpf_rcu_read_unlock() kfunc call site, so any such rcu pointer
won't be trusted any more outside the bpf_rcu_read_lock() region.
The current implementation does not support nested rcu read lock
region in the prog.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221124053217.2373910-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce bpf_func_proto->might_sleep to indicate a particular helper
might sleep. This will make later check whether a helper might be
sleepable or not easier.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221124053211.2373553-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, without rcu attribute info in BTF, the verifier treats
rcu tagged pointer as a normal pointer. This might be a problem
for sleepable program where rcu_read_lock()/unlock() is not available.
For example, for a sleepable fentry program, if rcu protected memory
access is interleaved with a sleepable helper/kfunc, it is possible
the memory access after the sleepable helper/kfunc might be invalid
since the object might have been freed then. To prevent such cases,
introducing rcu tagging for memory accesses in verifier can help
to reject such programs.
To enable rcu tagging in BTF, during kernel compilation,
define __rcu as attribute btf_type_tag("rcu") so __rcu information can
be preserved in dwarf and btf, and later can be used for bpf prog verification.
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221124053206.2373141-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into HEAD
so we can apply I2C cleanups.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter and xfrm.
Current release - regressions:
- dccp/tcp: fix bhash2 issues related to WARN_ON() in
inet_csk_get_port()
- l2tp: don't sleep and disable BH under writer-side sk_callback_lock
- eth: ice: fix handling of burst tx timestamps
Current release - new code bugs:
- xfrm: squelch kernel warning in case XFRM encap type is not
available
- eth: mlx5e: fix possible race condition in macsec extended packet
number update routine
Previous releases - regressions:
- neigh: decrement the family specific qlen
- netfilter: fix ipset regression
- rxrpc: fix race between conn bundle lookup and bundle removal
[ZDI-CAN-15975]
- eth: iavf: do not restart tx queues after reset task failure
- eth: nfp: add port from netdev validation for EEPROM access
- eth: mtk_eth_soc: fix potential memory leak in mtk_rx_alloc()
Previous releases - always broken:
- tipc: set con sock in tipc_conn_alloc
- nfc:
- fix potential memory leaks
- fix incorrect sizing calculations in EVT_TRANSACTION
- eth: octeontx2-af: fix pci device refcount leak
- eth: bonding: fix ICMPv6 header handling when receiving IPv6
messages
- eth: prestera: add missing unregister_netdev() in
prestera_port_create()
- eth: tsnep: fix rotten packets
Misc:
- usb: qmi_wwan: add support for LARA-L6"
* tag 'net-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: thunderx: Fix the ACPI memory leak
octeontx2-af: Fix reference count issue in rvu_sdp_init()
net: altera_tse: release phylink resources in tse_shutdown()
virtio_net: Fix probe failed when modprobe virtio_net
net: wwan: t7xx: Fix the ACPI memory leak
octeontx2-pf: Add check for devm_kcalloc
net: enetc: preserve TX ring priority across reconfiguration
net: marvell: prestera: add missing unregister_netdev() in prestera_port_create()
nfc: st-nci: fix incorrect sizing calculations in EVT_TRANSACTION
nfc: st-nci: fix memory leaks in EVT_TRANSACTION
nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION
Documentation: networking: Update generic_netlink_howto URL
net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLP
net: usb: qmi_wwan: add u-blox 0x1342 composition
l2tp: Don't sleep and disable BH under writer-side sk_callback_lock
net: dm9051: Fix missing dev_kfree_skb() in dm9051_loop_rx()
arcnet: fix potential memory leak in com20020_probe()
ipv4: Fix error return code in fib_table_insert()
net: ethernet: mtk_eth_soc: fix memory leak in error path
net: ethernet: mtk_eth_soc: fix resource leak in error path
...
|
|
Now that we made the VFS setgid checking consistent an inode can't be
marked security irrelevant even if the setgid bit is still set. Make
this function consistent with all other helpers.
Note that enforcing consistent setgid stripping checks for file
modification and mode- and ownership changes will cause the setgid bit
to be lost in more cases than useed to be the case. If an unprivileged
user wrote to a non-executable setgid file that they don't have
privilege over the setgid bit will be dropped. This will lead to
temporary failures in some xfstests until they have been updated.
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
irqreturn.h:6: warning: missing initial short description on line:
* enum irqreturn
irqreturn.h:15: warning: Enum value 'IRQ_NONE' not described in enum 'irqreturn'
irqreturn.h:15: warning: Enum value 'IRQ_HANDLED' not described in enum 'irqreturn'
irqreturn.h:15: warning: Enum value 'IRQ_WAKE_THREAD' not described in enum 'irqreturn'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221124063013.28479-1-rdunlap@infradead.org
|
|
bitfield mode in ocr register has only 2 bits not 3, so correct
the OCR_MODE_MASK define.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20221123071636.2407823-1-hs@denx.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Tearing down timers which have circular dependencies to other
functionality, e.g. workqueues, where the timer can schedule work and work
can arm timers, is not trivial.
In those cases it is desired to shutdown the timer in a way which prevents
rearming of the timer. The mechanism to do so is to set timer->function to
NULL and use this as an indicator for the timer arming functions to ignore
the (re)arm request.
Expose new interfaces for this: timer_shutdown_sync() and timer_shutdown().
timer_shutdown_sync() has the same functionality as timer_delete_sync()
plus the NULL-ification of the timer function.
timer_shutdown() has the same functionality as timer_delete() plus the
NULL-ification of the timer function.
In both cases the rearming of the timer is prevented by silently discarding
rearm attempts due to timer->function being NULL.
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org
Link: https://lore.kernel.org/r/20221123201625.314230270@linutronix.de
|
|
The timer related functions do not have a strict timer_ prefixed namespace
which is really annoying.
Rename del_timer() to timer_delete() and provide del_timer()
as a wrapper. Document that del_timer() is not for new code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201625.015535022@linutronix.de
|
|
The timer related functions do not have a strict timer_ prefixed namespace
which is really annoying.
Rename del_timer_sync() to timer_delete_sync() and provide del_timer_sync()
as a wrapper. Document that del_timer_sync() is not for new code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.954785441@linutronix.de
|
|
del_timer_sync() is assumed to be pointless on uniprocessor systems and can
be mapped to del_timer() because in theory del_timer() can never be invoked
while the timer callback function is executed.
This is not entirely true because del_timer() can be invoked from interrupt
context and therefore hit in the middle of a running timer callback.
Contrary to that del_timer_sync() is not allowed to be invoked from
interrupt context unless the affected timer is marked with TIMER_IRQSAFE.
del_timer_sync() has proper checks in place to detect such a situation.
Give up on the UP optimization and make del_timer_sync() unconditionally
available.
Co-developed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/all/20220407161745.7d6754b3@gandalf.local.home
Link: https://lore.kernel.org/all/20221110064101.429013735@goodmis.org
Link: https://lore.kernel.org/r/20221123201624.888306160@linutronix.de
|
|
del_singleshot_timer_sync() used to be an optimization for deleting timers
which are not rearmed from the timer callback function.
This optimization turned out to be broken and got mapped to
del_timer_sync() about 17 years ago.
Get rid of the undocumented indirection and use del_timer_sync() directly.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.706987932@linutronix.de
|
|
Currently offload path limits replay window size to 32/64/128/256 bits,
such a limitation should not exist since software allows it.
Remove such limitation.
Fixes: eb43846b43c3 ("net/mlx5e: Support MACsec offload replay window")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
With CONFIG_DEBUG_INFO_BTF not set, we hit the following compilation error,
/.../kernel/bpf/verifier.c:8196:23: error: array index 6 is past the end of the array
(that has type 'u32[5]' (aka 'unsigned int[5]')) [-Werror,-Warray-bounds]
if (meta->func_id == special_kfunc_list[KF_bpf_cast_to_kern_ctx])
^ ~~~~~~~~~~~~~~~~~~~~~~~
/.../kernel/bpf/verifier.c:8174:1: note: array 'special_kfunc_list' declared here
BTF_ID_LIST(special_kfunc_list)
^
/.../include/linux/btf_ids.h:207:27: note: expanded from macro 'BTF_ID_LIST'
#define BTF_ID_LIST(name) static u32 __maybe_unused name[5];
^
/.../kernel/bpf/verifier.c:8443:19: error: array index 5 is past the end of the array
(that has type 'u32[5]' (aka 'unsigned int[5]')) [-Werror,-Warray-bounds]
btf_id == special_kfunc_list[KF_bpf_list_pop_back];
^ ~~~~~~~~~~~~~~~~~~~~
/.../kernel/bpf/verifier.c:8174:1: note: array 'special_kfunc_list' declared here
BTF_ID_LIST(special_kfunc_list)
^
/.../include/linux/btf_ids.h:207:27: note: expanded from macro 'BTF_ID_LIST'
#define BTF_ID_LIST(name) static u32 __maybe_unused name[5];
...
Fix the problem by increase the size of BTF_ID_LIST to 16 to avoid compilation error
and also prevent potentially unintended issue due to out-of-bound access.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221123155759.2669749-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Silence the following warning when built with W=1:
| CC drivers/acpi/device_pm.c
| warning: no previous prototype for function 'acpi_subsys_restore_early' [-Wmissing-prototypes]
| int acpi_subsys_restore_early(struct device *dev)
| ^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Silence the following warnings when built with W=1:
| CC drivers/acpi/acpi_ffh.c
| warning: no previous prototype for 'acpi_ffh_address_space_arch_setup' [-Wmissing-prototypes]
| int __weak acpi_ffh_address_space_arch_setup(void *handler_ctxt,
| ^
| CC drivers/acpi/acpi_ffh.c
| warning: no previous prototype for 'acpi_ffh_address_space_arch_handler' [-Wmissing-prototypes]
| int __weak acpi_ffh_address_space_arch_handler(acpi_integer *value,
| ^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
