summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2024-02-14Merge tag 'mips-fixes_6.8_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - Fix for broken ipv6 checksums - Fix handling of exceptions in delay slots * tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mm/memory: Use exception ip to search exception tables MIPS: Clear Cause.BD in instruction_pointer_set ptrace: Introduce exception_ip arch hook MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler
2024-02-14Merge tag 'iio-fixes-for-6.8a' of ↵Greg Kroah-Hartman
http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for the 6.8 cycle Usual mixed bag of issues introduced this cycle and fixes for long term issues that have been identified recently + one case where I messed up a merge resolution and dropped the build file changes. Most important is the userspace ABI fix for the iio_modifier enum where we accidentally added new entries in the middle rather than at the end. IIO Core - Close a memory leak in an error path. - Move LIGHT_UVA and LIGHT_UVB definitions to end of the iio_modifier enum to avoid breaking older userspace. (not yet in a released kernel thankfully). adi,adis - Fix a DMA buffer alignment issue that was missing in series that fixed these across IIO. adi,ad-sigma-delta - Fix a DMA buffer alignment issue that was missing in series that fixed these across IIO. adi,ad4130 - Zero init remaining fields of clock init data. - Only set GPIO control bits on pins that aren't in use for anything else. adi,ad5933 - Fix an old bug due to type mismatch. This is a rare device so good to get some new test coverage. adi,ad7091r - Use right variable for an error return code. bosch,bma400 - Add missing CONFIG_REGMAP_I2C dependency. bosch,bmp280: - Add missing bmp085 ID to the SPI table to avoid mismatch with the of_device_id table. hid-sensors: - Avoid returning an error for timestamp read back that succeeds. pni,rm3100 - Check value read from RM31000_REG_TMRC register is valid before using it. Hardening to avoid a real world issue seen on some faulty hardware. st,st-sensors - Fix a DMA buffer alignment issue that was missing in series that fixed these across IIO. ti,hdc3020 - Add missing Kconfig and Makefile entrees accidentally dropped when patches were applied. - Fix wrong temperature offset (negated) * tag 'iio-fixes-for-6.8a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: ad4130: only set GPIO_CTRL if pin is unused iio: adc: ad4130: zero-initialize clock init data iio: accel: bma400: Fix a compilation problem iio: commom: st_sensors: ensure proper DMA alignment iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier staging: iio: ad5933: fix type mismatch regression iio: humidity: hdc3020: fix temperature offset iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup() iio: adc: ad_sigma_delta: ensure proper DMA alignment iio: imu: adis: ensure proper DMA alignment iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry iio: imu: bno055: serdev requires REGMAP iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC iio: pressure: bmp280: Add missing bmp085 to SPI id table iio: core: fix memleak in iio_device_register_sysfs
2024-02-14net: remove dev_base_lockEric Dumazet
dev_base_lock is not needed anymore, all remaining users also hold RTNL. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14net: add netdev_set_operstate() helperEric Dumazet
dev_base_lock is going away, add netdev_set_operstate() helper so that hsr does not have to know core internals. Remove dev_base_lock acquisition from rfc2863_policy() v3: use an "unsigned int" for dev->operstate, so that try_cmpxchg() can work on all arches. ( https://lore.kernel.org/oe-kbuild-all/202402081918.OLyGaea3-lkp@intel.com/ ) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14net: convert dev->reg_state to u8Eric Dumazet
Prepares things so that dev->reg_state reads can be lockless, by adding WRITE_ONCE() on write side. READ_ONCE()/WRITE_ONCE() do not support bitfields. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-13veth: rely on skb_pp_cow_data utility routineLorenzo Bianconi
Rely on skb_pp_cow_data utility routine and remove duplicated code. Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/029cc14cce41cb242ee7efdcf32acc81f1ce4e9f.1707729884.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-13xdp: add multi-buff support for xdp running in generic modeLorenzo Bianconi
Similar to native xdp, do not always linearize the skb in netif_receive_generic_xdp routine but create a non-linear xdp_buff to be processed by the eBPF program. This allow to add multi-buffer support for xdp running in generic mode. Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/1044d6412b1c3e95b40d34993fd5f37cd2f319fd.1707729884.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-13xdp: rely on skb pointer reference in do_xdp_generic and ↵Lorenzo Bianconi
netif_receive_generic_xdp Rely on skb pointer reference instead of the skb pointer in do_xdp_generic and netif_receive_generic_xdp routine signatures. This is a preliminary patch to add multi-buff support for xdp running in generic mode where we will need to reallocate the skb to avoid linearization and we will need to make it visible to do_xdp_generic() caller. Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c09415b1f48c8620ef4d76deed35050a7bddf7c2.1707729884.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-13bpf: simplify btf_get_prog_ctx_type() into btf_is_prog_ctx_type()Andrii Nakryiko
Return result of btf_get_prog_ctx_type() is never used and callers only check NULL vs non-NULL case to determine if given type matches expected PTR_TO_CTX type. So rename function to `btf_is_prog_ctx_type()` and return a simple true/false. We'll use this simpler interface to handle kprobe program type's special typedef case in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240212233221.2575350-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-13bpf: remove check in __cgroup_bpf_run_filter_skbOliver Crumrine
Originally, this patch removed a redundant check in BPF_CGROUP_RUN_PROG_INET_EGRESS, as the check was already being done in the function it called, __cgroup_bpf_run_filter_skb. For v2, it was reccomended that I remove the check from __cgroup_bpf_run_filter_skb, and add the checks to the other macro that calls that function, BPF_CGROUP_RUN_PROG_INET_INGRESS. To sum it up, checking that the socket exists and that it is a full socket is now part of both macros BPF_CGROUP_RUN_PROG_INET_EGRESS and BPF_CGROUP_RUN_PROG_INET_INGRESS, and it is no longer part of the function they call, __cgroup_bpf_run_filter_skb. v3->v4: Fixed weird merge conflict. v2->v3: Sent to bpf-next instead of generic patch v1->v2: Addressed feedback about where check should be removed. Signed-off-by: Oliver Crumrine <ozlinuxc@gmail.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/7lv62yiyvmj5a7eozv2iznglpkydkdfancgmbhiptrgvgan5sy@3fl3onchgdz3 Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-13bpf: Create argument information for nullable arguments.Kui-Feng Lee
Collect argument information from the type information of stub functions to mark arguments of BPF struct_ops programs with PTR_MAYBE_NULL if they are nullable. A nullable argument is annotated by suffixing "__nullable" at the argument name of stub function. For nullable arguments, this patch sets a struct bpf_ctx_arg_aux to label their reg_type with PTR_TO_BTF_ID | PTR_TRUSTED | PTR_MAYBE_NULL. This makes the verifier to check programs and ensure that they properly check the pointer. The programs should check if the pointer is null before accessing the pointed memory. The implementer of a struct_ops type should annotate the arguments that can be null. The implementer should define a stub function (empty) as a placeholder for each defined operator. The name of a stub function should be in the pattern "<st_op_type>__<operator name>". For example, for test_maybe_null of struct bpf_testmod_ops, it's stub function name should be "bpf_testmod_ops__test_maybe_null". You mark an argument nullable by suffixing the argument name with "__nullable" at the stub function. Since we already has stub functions for kCFI, we just reuse these stub functions with the naming convention mentioned earlier. These stub functions with the naming convention is only required if there are nullable arguments to annotate. For functions having not nullable arguments, stub functions are not necessary for the purpose of this patch. This patch will prepare a list of struct bpf_ctx_arg_aux, aka arg_info, for each member field of a struct_ops type. "arg_info" will be assigned to "prog->aux->ctx_arg_info" of BPF struct_ops programs in check_struct_ops_btf_id() so that it can be used by btf_ctx_access() later to set reg_type properly for the verifier. Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240209023750.1153905-4-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-13bpf: Move __kfunc_param_match_suffix() to btf.c.Kui-Feng Lee
Move __kfunc_param_match_suffix() to btf.c and rename it as btf_param_match_suffix(). It can be reused by bpf_struct_ops later. Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240209023750.1153905-3-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-13bpf: add btf pointer to struct bpf_ctx_arg_aux.Kui-Feng Lee
Enable the providers to use types defined in a module instead of in the kernel (btf_vmlinux). Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240209023750.1153905-2-thinker.li@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-13bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctlyYonghong Song
Currently tracing is supposed not to allow for bpf_spin_{lock,unlock}() helper calls. This is to prevent deadlock for the following cases: - there is a prog (prog-A) calling bpf_spin_{lock,unlock}(). - there is a tracing program (prog-B), e.g., fentry, attached to bpf_spin_lock() and/or bpf_spin_unlock(). - prog-B calls bpf_spin_{lock,unlock}(). For such a case, when prog-A calls bpf_spin_{lock,unlock}(), a deadlock will happen. The related source codes are below in kernel/bpf/helpers.c: notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock) notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock) notrace is supposed to prevent fentry prog from attaching to bpf_spin_{lock,unlock}(). But actually this is not the case and fentry prog can successfully attached to bpf_spin_lock(). Siddharth Chintamaneni reported the issue in [1]. The following is the macro definition for above BPF_CALL_1: #define BPF_CALL_x(x, name, ...) \ static __always_inline \ u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \ typedef u64 (*btf_##name)(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \ u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)); \ u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__)) \ { \ return ((btf_##name)____##name)(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\ } \ static __always_inline \ u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)) #define BPF_CALL_1(name, ...) BPF_CALL_x(1, name, __VA_ARGS__) The notrace attribute is actually applied to the static always_inline function ____bpf_spin_{lock,unlock}(). The actual callback function bpf_spin_{lock,unlock}() is not marked with notrace, hence allowing fentry prog to attach to two helpers, and this may cause the above mentioned deadlock. Siddharth Chintamaneni actually has a reproducer in [2]. To fix the issue, a new macro NOTRACE_BPF_CALL_1 is introduced which will add notrace attribute to the original function instead of the hidden always_inline function and this fixed the problem. [1] https://lore.kernel.org/bpf/CAE5sdEigPnoGrzN8WU7Tx-h-iFuMZgW06qp0KHWtpvoXxf1OAQ@mail.gmail.com/ [2] https://lore.kernel.org/bpf/CAE5sdEg6yUc_Jz50AnUXEEUh6O73yQ1Z6NV2srJnef0ZrQkZew@mail.gmail.com/ Fixes: d83525ca62cf ("bpf: introduce bpf_spin_lock") Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20240207070102.335167-1-yonghong.song@linux.dev
2024-02-13nvme: implement support for relaxed effectsKeith Busch
NVM Express TP4167 provides a way for controllers to report a relaxed execution constraint. Specifically, it notifies of exclusivity for IO vs. admin commands instead of grouping these together. If set, then we don't need to freeze IO in order to execute that admin command. The freezing distrupts IO processes, so it's nice to avoid that if the controller tells us it's not necessary. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-02-13gpiolib: add gpio_device_get_label() stub for !GPIOLIBKrzysztof Kozlowski
Add empty stub of gpio_device_get_label() when GPIOLIB is not enabled. Cc: <stable@vger.kernel.org> Fixes: d1f7728259ef ("gpiolib: provide gpio_device_get_label()") Suggested-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-13gpiolib: add gpio_device_get_base() stub for !GPIOLIBKrzysztof Kozlowski
Add empty stub of gpio_device_get_base() when GPIOLIB is not enabled. Cc: <stable@vger.kernel.org> Fixes: 8c85a102fc4e ("gpiolib: provide gpio_device_get_base()") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-13gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIBKrzysztof Kozlowski
Add empty stub of gpiod_to_gpio_device() when GPIOLIB is not enabled. Cc: <stable@vger.kernel.org> Fixes: 370232d096e3 ("gpiolib: provide gpiod_to_gpio_device()") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-12ptrace: Introduce exception_ip arch hookJiaxun Yang
On architectures with delay slot, architecture level instruction pointer (or program counter) in pt_regs may differ from where exception was triggered. Introduce exception_ip hook to invoke architecture code and determine actual instruction pointer to the exception. Link: https://lore.kernel.org/lkml/00d1b813-c55f-4365-8d81-d70258e10b16@app.fastmail.com/ Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-02-12Merge tag 'vfs-6.8-rc5.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Fix performance regression introduced by moving the security permission hook out of do_clone_file_range() and into its caller vfs_clone_file_range(). This causes the security hook to be called in situation were it wasn't called before as the fast permission checks were left in do_clone_file_range(). Fix this by merging the two implementations back together and restoring the old ordering: fast permission checks first, expensive ones later. - Tweak mount_setattr() permission checking so that mount properties on the real rootfs can be changed. When we added mount_setattr() we added additional checks compared to legacy mount(2). If the mount had a parent then verify that the caller and the mount namespace the mount is attached to match and if not make sure that it's an anonymous mount. But the real rootfs falls into neither category. It is neither an anoymous mount because it is obviously attached to the initial mount namespace but it also obviously doesn't have a parent mount. So that means legacy mount(2) allows changing mount properties on the real rootfs but mount_setattr(2) blocks this. This causes regressions (See the commit for details). Fix this by relaxing the check. If the mount has a parent or if it isn't a detached mount, verify that the mount namespaces of the caller and the mount are the same. Technically, we could probably write this even simpler and check that the mount namespaces match if it isn't a detached mount. But the slightly longer check makes it clearer what conditions one needs to think about. * tag 'vfs-6.8-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: relax mount_setattr() permission checks remap_range: merge do_clone_file_range() into vfs_clone_file_range()
2024-02-12net-device: move lstats in net_device_read_txrxEric Dumazet
dev->lstats is notably used from loopback ndo_start_xmit() and other virtual drivers. Per cpu stats updates are dirtying per-cpu data, but the pointer itself is read-only. Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12tcp: move tp->tcp_usec_ts to tcp_sock_read_txrx groupEric Dumazet
tp->tcp_usec_ts is a read mostly field, used in rx and tx fast paths. Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Wei Wang <weiwan@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12tcp: move tp->scaling_ratio to tcp_sock_read_txrx groupEric Dumazet
tp->scaling_ratio is a read mostly field, used in rx and tx fast paths. Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Wei Wang <weiwan@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-11bpf: Allow compiler to inline most of bpf_local_storage_lookup()Marco Elver
In various performance profiles of kernels with BPF programs attached, bpf_local_storage_lookup() appears as a significant portion of CPU cycles spent. To enable the compiler generate more optimal code, turn bpf_local_storage_lookup() into a static inline function, where only the cache insertion code path is outlined Notably, outlining cache insertion helps avoid bloating callers by duplicating setting up calls to raw_spin_{lock,unlock}_irqsave() (on architectures which do not inline spin_lock/unlock, such as x86), which would cause the compiler produce worse code by deciding to outline otherwise inlinable functions. The call overhead is neutral, because we make 2 calls either way: either calling raw_spin_lock_irqsave() and raw_spin_unlock_irqsave(); or call __bpf_local_storage_insert_cache(), which calls raw_spin_lock_irqsave(), followed by a tail-call to raw_spin_unlock_irqsave() where the compiler can perform TCO and (in optimized uninstrumented builds) turns it into a plain jump. The call to __bpf_local_storage_insert_cache() can be elided entirely if cacheit_lockit is a false constant expression. Based on results from './benchs/run_bench_local_storage.sh' (21 trials, reboot between each trial; x86 defconfig + BPF, clang 16) this produces improvements in throughput and latency in the majority of cases, with an average (geomean) improvement of 8%: +---- Hashmap Control -------------------- | | + num keys: 10 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 14.789 M ops/s | 14.745 M ops/s ( ~ ) | +- hits latency | 67.679 ns/op | 67.879 ns/op ( ~ ) | +- important_hits throughput | 14.789 M ops/s | 14.745 M ops/s ( ~ ) | | + num keys: 1000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 12.233 M ops/s | 12.170 M ops/s ( ~ ) | +- hits latency | 81.754 ns/op | 82.185 ns/op ( ~ ) | +- important_hits throughput | 12.233 M ops/s | 12.170 M ops/s ( ~ ) | | + num keys: 10000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 7.220 M ops/s | 7.204 M ops/s ( ~ ) | +- hits latency | 138.522 ns/op | 138.842 ns/op ( ~ ) | +- important_hits throughput | 7.220 M ops/s | 7.204 M ops/s ( ~ ) | | + num keys: 100000 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 5.061 M ops/s | 5.165 M ops/s (+2.1%) | +- hits latency | 198.483 ns/op | 194.270 ns/op (-2.1%) | +- important_hits throughput | 5.061 M ops/s | 5.165 M ops/s (+2.1%) | | + num keys: 4194304 | : <before> | <after> | +-+ hashmap (control) sequential get +----------------------+---------------------- | +- hits throughput | 2.864 M ops/s | 2.882 M ops/s ( ~ ) | +- hits latency | 365.220 ns/op | 361.418 ns/op (-1.0%) | +- important_hits throughput | 2.864 M ops/s | 2.882 M ops/s ( ~ ) | +---- Local Storage ---------------------- | | + num_maps: 1 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 33.005 M ops/s | 39.068 M ops/s (+18.4%) | +- hits latency | 30.300 ns/op | 25.598 ns/op (-15.5%) | +- important_hits throughput | 33.005 M ops/s | 39.068 M ops/s (+18.4%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 37.151 M ops/s | 44.926 M ops/s (+20.9%) | +- hits latency | 26.919 ns/op | 22.259 ns/op (-17.3%) | +- important_hits throughput | 37.151 M ops/s | 44.926 M ops/s (+20.9%) | | + num_maps: 10 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 32.288 M ops/s | 38.099 M ops/s (+18.0%) | +- hits latency | 30.972 ns/op | 26.248 ns/op (-15.3%) | +- important_hits throughput | 3.229 M ops/s | 3.810 M ops/s (+18.0%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 34.473 M ops/s | 41.145 M ops/s (+19.4%) | +- hits latency | 29.010 ns/op | 24.307 ns/op (-16.2%) | +- important_hits throughput | 12.312 M ops/s | 14.695 M ops/s (+19.4%) | | + num_maps: 16 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 32.524 M ops/s | 38.341 M ops/s (+17.9%) | +- hits latency | 30.748 ns/op | 26.083 ns/op (-15.2%) | +- important_hits throughput | 2.033 M ops/s | 2.396 M ops/s (+17.9%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 34.575 M ops/s | 41.338 M ops/s (+19.6%) | +- hits latency | 28.925 ns/op | 24.193 ns/op (-16.4%) | +- important_hits throughput | 11.001 M ops/s | 13.153 M ops/s (+19.6%) | | + num_maps: 17 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 28.861 M ops/s | 32.756 M ops/s (+13.5%) | +- hits latency | 34.649 ns/op | 30.530 ns/op (-11.9%) | +- important_hits throughput | 1.700 M ops/s | 1.929 M ops/s (+13.5%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 31.529 M ops/s | 36.110 M ops/s (+14.5%) | +- hits latency | 31.719 ns/op | 27.697 ns/op (-12.7%) | +- important_hits throughput | 9.598 M ops/s | 10.993 M ops/s (+14.5%) | | + num_maps: 24 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 18.602 M ops/s | 19.937 M ops/s (+7.2%) | +- hits latency | 53.767 ns/op | 50.166 ns/op (-6.7%) | +- important_hits throughput | 0.776 M ops/s | 0.831 M ops/s (+7.2%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 21.718 M ops/s | 23.332 M ops/s (+7.4%) | +- hits latency | 46.047 ns/op | 42.865 ns/op (-6.9%) | +- important_hits throughput | 6.110 M ops/s | 6.564 M ops/s (+7.4%) | | + num_maps: 32 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 14.118 M ops/s | 14.626 M ops/s (+3.6%) | +- hits latency | 70.856 ns/op | 68.381 ns/op (-3.5%) | +- important_hits throughput | 0.442 M ops/s | 0.458 M ops/s (+3.6%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 17.111 M ops/s | 17.906 M ops/s (+4.6%) | +- hits latency | 58.451 ns/op | 55.865 ns/op (-4.4%) | +- important_hits throughput | 4.776 M ops/s | 4.998 M ops/s (+4.6%) | | + num_maps: 100 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 5.281 M ops/s | 5.528 M ops/s (+4.7%) | +- hits latency | 192.398 ns/op | 183.059 ns/op (-4.9%) | +- important_hits throughput | 0.053 M ops/s | 0.055 M ops/s (+4.9%) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 6.265 M ops/s | 6.498 M ops/s (+3.7%) | +- hits latency | 161.436 ns/op | 152.877 ns/op (-5.3%) | +- important_hits throughput | 1.636 M ops/s | 1.697 M ops/s (+3.7%) | | + num_maps: 1000 | : <before> | <after> | +-+ local_storage cache sequential get +----------------------+---------------------- | +- hits throughput | 0.355 M ops/s | 0.354 M ops/s ( ~ ) | +- hits latency | 2826.538 ns/op | 2827.139 ns/op ( ~ ) | +- important_hits throughput | 0.000 M ops/s | 0.000 M ops/s ( ~ ) | : | : <before> | <after> | +-+ local_storage cache interleaved get +----------------------+---------------------- | +- hits throughput | 0.404 M ops/s | 0.403 M ops/s ( ~ ) | +- hits latency | 2481.190 ns/op | 2487.555 ns/op ( ~ ) | +- important_hits throughput | 0.102 M ops/s | 0.101 M ops/s ( ~ ) The on_lookup test in {cgrp,task}_ls_recursion.c is removed because the bpf_local_storage_lookup is no longer traceable and adding tracepoint will make the compiler generate worse code: https://lore.kernel.org/bpf/ZcJmok64Xqv6l4ZS@elver.google.com/ Signed-off-by: Marco Elver <elver@google.com> Cc: Martin KaFai Lau <martin.lau@linux.dev> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20240207122626.3508658-1-elver@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-11Merge tag 'timers_urgent_for_v6.8_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Make sure a warning is issued when a hrtimer gets queued after the timers have been migrated on the CPU down path and thus said timer will get ignored * tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Report offline hrtimer enqueue
2024-02-10Merge tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - Update a potentially stale firmware attribute (Maurizio) - Fixes for the recent verbose error logging (Keith, Chaitanya) - Protection information payload size fix for passthrough (Francis) - Fix for a queue freezing issue in virtblk (Yi) - blk-iocost underflow fix (Tejun) - blk-wbt task detection fix (Jan) * tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linux: virtio-blk: Ensure no requests in virtqueues before deleting vqs. blk-iocost: Fix an UBSAN shift-out-of-bounds warning nvme: use ns->head->pi_size instead of t10_pi_tuple structure size nvme-core: fix comment to reflect right functions nvme: move passthrough logging attribute to head blk-wbt: Fix detection of dirty-throttled tasks nvme-host: fix the updating of the firmware version
2024-02-10net: phy: provide whether link has changed in c37_read_statusChristian Marangi
Some PHY driver might require additional regs call after genphy_c37_read_status() is called. Expand genphy_c37_read_status to provide a bool wheather the link has changed or not to permit PHY driver to skip additional regs call if nothing has changed. Every user of genphy_c37_read_status() is updated with the new additional bool. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-10net: phy: add devm/of_phy_package_join helperChristian Marangi
Add devm/of_phy_package_join helper to join PHYs in a PHY package. These are variant of the manual phy_package_join with the difference that these will use DT nodes to derive the base_addr instead of manually passing an hardcoded value. An additional value is added in phy_package_shared, "np" to reference the PHY package node pointer in specific PHY driver probe_once and config_init_once functions to make use of additional specific properties defined in the PHY package node in DT. The np value is filled only with of_phy_package_join if a valid PHY package node is found. A valid PHY package node must have the node name set to "ethernet-phy-package". Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09Revert "get rid of DCACHE_GENOCIDE"Al Viro
This reverts commit 57851607326a2beef21e67f83f4f53a90df8445a. Unfortunately, while we only call that thing once, the callback *can* be called more than once for the same dentry - all it takes is rename_lock being touched while we are in d_walk(). For now let's revert it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-02-09Merge tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "Some fscrypt-related fixups (sparse reads are used only for encrypted files) and two cap handling fixes from Xiubo and Rishabh" * tag 'ceph-for-6.8-rc4' of https://github.com/ceph/ceph-client: ceph: always check dir caps asynchronously ceph: prevent use-after-free in encode_cap_msg() ceph: always set initial i_blkbits to CEPH_FSCRYPT_BLOCK_SHIFT libceph: just wait for more data to be available on the socket libceph: rename read_sparse_msg_*() to read_partial_sparse_msg_*() libceph: fail sparse-read if the data length doesn't match
2024-02-09work around gcc bugs with 'asm goto' with outputsLinus Torvalds
We've had issues with gcc and 'asm goto' before, and we created a 'asm_volatile_goto()' macro for that in the past: see commits 3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation bug") and a9f180345f53 ("compiler/gcc4: Make quirk for asm_volatile_goto() unconditional"). Then, much later, we ended up removing the workaround in commit 43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR 58670") because we no longer supported building the kernel with the affected gcc versions, but we left the macro uses around. Now, Sean Christopherson reports a new version of a very similar problem, which is fixed by re-applying that ancient workaround. But the problem in question is limited to only the 'asm goto with outputs' cases, so instead of re-introducing the old workaround as-is, let's rename and limit the workaround to just that much less common case. It looks like there are at least two separate issues that all hit in this area: (a) some versions of gcc don't mark the asm goto as 'volatile' when it has outputs: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420 which is easy to work around by just adding the 'volatile' by hand. (b) Internal compiler errors: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422 which are worked around by adding the extra empty 'asm' as a barrier, as in the original workaround. but the problem Sean sees may be a third thing since it involves bad code generation (not an ICE) even with the manually added 'volatile'. but the same old workaround works for this case, even if this feels a bit like voodoo programming and may only be hiding the issue. Reported-and-tested-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/ Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Andrew Pinski <quic_apinski@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-02-09Merge tag 'efi-fixes-for-v6.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "The only notable change here is the patch that changes the way we deal with spurious errors from the EFI memory attribute protocol. This will be backported to v6.6, and is intended to ensure that we will not paint ourselves into a corner when we tighten this further in order to comply with MS requirements on signed EFI code. Note that this protocol does not currently exist in x86 production systems in the field, only in Microsoft's fork of OVMF, but it will be mandatory for Windows logo certification for x86 PCs in the future. - Tighten ELF relocation checks on the RISC-V EFI stub - Give up if the new EFI memory attributes protocol fails spuriously on x86 - Take care not to place the kernel in the lowest 16 MB of DRAM on x86 - Omit special purpose EFI memory from memblock - Some fixes for the CXL CPER reporting code - Make the PE/COFF layout of mixed-mode capable images comply with a strict interpretation of the spec" * tag 'efi-fixes-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section cxl/trace: Remove unnecessary memcpy's cxl/cper: Fix errant CPER prints for CXL events efi: Don't add memblocks for soft-reserved memory efi: runtime: Fix potential overflow of soft-reserved region size efi/libstub: Add one kernel-doc comment x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR x86/efistub: Give up if memory attribute protocol returns an error riscv/efistub: Tighten ELF relocation check riscv/efistub: Ensure GP-relative addressing is not used
2024-02-09wwan: core: Add WWAN fastboot port typeJinjian Song
Add a new WWAN port that connects to the device fastboot protocol interface. Signed-off-by: Jinjian Song <jinjian.song@fibocom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09Revert "usb: dwc3: Support EBC feature of DWC_usb31"Thinh Nguyen
This reverts commit 398aa9a7e77cf23c2a6f882ddd3dcd96f21771dc. The update to the gadget API to support EBC feature is incomplete. It's missing at least the following: * New usage documentation * Gadget capability check * Condition for the user to check how many and which endpoints can be used as "fifo_mode" * Description of how it can affect completed request (e.g. dwc3 won't update TRB on completion -- ie. how it can affect request's actual length report) Let's revert this until it's ready. Fixes: 398aa9a7e77c ("usb: dwc3: Support EBC feature of DWC_usb31") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/3042f847ff904b4dd4e4cf66a1b9df470e63439e.1707441690.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/stmicro/stmmac/common.h 38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters") fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF") c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") drivers/net/wireless/microchip/wilc1000/netdev.c c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000") 328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08wifi: mac80211: adjust EHT capa when lowering bandwidthJohannes Berg
If intending to associate with a lower bandwidth, remove capabilities related to 320 MHz from the EHT capabilities element. Also change the EHT MCS-NSS set accordingly: if just reducing 320->160 or similar the format doesn't change, just cut off the last bytes. If changing from higher bandwidth to 20 MHz only EHT STA, adjust the format. Note that this also requires adjusting the caller in mlme.c since the data written can now be shorter than it determined. We need to clean all that up. Since the other callers pass NULL for the conn limit, we don't need to change things there. Link: https://msgid.link/20240129202041.b5f6df108c77.I0d8ea04079c61cb3744cc88625eeaf0d4776dc2b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: implement MLO multicast deduplicationJohannes Berg
If the vif is an MLD then it may receive multicast from different links, and should drop those frames according to the SN. Implement that. Link: https://msgid.link/20240129200456.693b77d14b44.I491846f2bea0058c14eab6422962c10bfae9b675@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: add/use ieee80211_get_sn()Johannes Berg
This will also be useful for MLO duplicate multicast detection, but add it already here and use it in one place that trivially converts. Link: https://msgid.link/20240129200456.f0ff49c80006.I850d2785ab1640e56e262d3ad7343b87f6962552@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: refactor puncturing bitmap extractionJohannes Berg
Add a new inline helper function to ieee80211.h to extract the disabled subchannels bitmap from an EHT operation element, and use that in mac80211 where we do that. Link: https://msgid.link/20240129194108.d9f50dcec8d0.I8b08cbc2490a734fafcce0fa0fc328211ba6f10b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-07Merge tag 'mlx5-updates-2024-02-01' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2024-02-01 1) IPSec global stats for xfrm and mlx5 2) XSK memory improvements for non-linear SKBs 3) Software steering debug dump to use seq_file ops 4) Various code clean-ups * tag 'mlx5-updates-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: XDP, Exclude headroom and tailroom from memory calculations net/mlx5e: XSK, Exclude tailroom from non-linear SKBs memory calculations net/mlx5: DR, Change SWS usage to debug fs seq_file interface net/mlx5: Change missing SyncE capability print to debug net/mlx5: Remove initial segmentation duplicate definitions net/mlx5: Return specific error code for timeout on wait_fw_init net/mlx5: SF, Stop waiting for FW as teardown was called net/mlx5: remove fw reporter dump option for non PF net/mlx5: remove fw_fatal reporter dump option for non PF net/mlx5: Rename mlx5_sf_dev_remove Documentation: Fix counter name of mlx5 vnic reporter net/mlx5e: Delete obsolete IPsec code net/mlx5e: Connect mlx5 IPsec statistics with XFRM core xfrm: get global statistics from the offloaded device xfrm: generalize xdo_dev_state_update_curlft to allow statistics update ==================== Link: https://lore.kernel.org/r/20240206005527.1353368-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07net: Do not return value from init_dummy_netdev()Amit Cohen
init_dummy_netdev() always returns zero and all the callers do not check the returned value. Set the function to not return value, as it is not really used today. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240205103022.440946-1-amcohen@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07libceph: just wait for more data to be available on the socketXiubo Li
A short read may occur while reading the message footer from the socket. Later, when the socket is ready for another read, the messenger invokes all read_partial_*() handlers, including read_partial_sparse_msg_data(). The expectation is that read_partial_sparse_msg_data() would bail, allowing the messenger to invoke read_partial() for the footer and pick up where it left off. However read_partial_sparse_msg_data() violates that and ends up calling into the state machine in the OSD client. The sparse-read state machine assumes that it's a new op and interprets some piece of the footer as the sparse-read header and returns bogus extents/data length, etc. To determine whether read_partial_sparse_msg_data() should bail, let's reuse cursor->total_resid. Because once it reaches to zero that means all the extents and data have been successfully received in last read, else it could break out when partially reading any of the extents and data. And then osd_sparse_read() could continue where it left off. [ idryomov: changelog ] Link: https://tracker.ceph.com/issues/63586 Fixes: d396f89db39a ("libceph: add sparse read support to msgr1") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2024-02-07libceph: fail sparse-read if the data length doesn't matchXiubo Li
Once this happens that means there have bugs. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2024-02-06net: phy: add helper phy_advertise_eee_allHeiner Kallweit
Per default phylib preserves the EEE advertising at the time of phy probing. The EEE advertising can be changed from user space, in addition this helper allows to set the EEE advertising to all supported modes from drivers in kernel space. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20bfc471-aeeb-4ae4-ba09-7d6d4be6b86a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-06blk-wbt: Fix detection of dirty-throttled tasksJan Kara
The detection of dirty-throttled tasks in blk-wbt has been subtly broken since its beginning in 2016. Namely if we are doing cgroup writeback and the throttled task is not in the root cgroup, balance_dirty_pages() will set dirty_sleep for the non-root bdi_writeback structure. However blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback structure. Thus detection of recently throttled tasks is not working in this case (we noticed this when we switched to cgroup v2 and suddently writeback was slow). Since blk-wbt has no easy way to get to proper bdi_writeback and furthermore its intention has always been to work on the whole device rather than on individual cgroups, just move the dirty_sleep timestamp from bdi_writeback to backing_dev_info. That fixes the checking for recently throttled task and saves memory for everybody as a bonus. CC: stable@vger.kernel.org Fixes: b57d74aff9ab ("writeback: track if we're sleeping on progress in balance_dirty_pages()") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz [axboe: fixup indentation errors] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-06remap_range: merge do_clone_file_range() into vfs_clone_file_range()Amir Goldstein
commit dfad37051ade ("remap_range: move permission hooks out of do_clone_file_range()") moved the permission hooks from do_clone_file_range() out to its caller vfs_clone_file_range(), but left all the fast sanity checks in do_clone_file_range(). This makes the expensive security hooks be called in situations that they would not have been called before (e.g. fs does not support clone). The only reason for the do_clone_file_range() helper was that overlayfs did not use to be able to call vfs_clone_file_range() from copy up context with sb_writers lock held. However, since commit c63e56a4a652 ("ovl: do not open/llseek lower file with upper sb_writers held"), overlayfs just uses an open coded version of vfs_clone_file_range(). Merge_clone_file_range() into vfs_clone_file_range(), restoring the original order of checks as it was before the regressing commit and adapt the overlayfs code to call vfs_clone_file_range() before the permission hooks that were added by commit ca7ab482401c ("ovl: add permission hooks outside of do_splice_direct()"). Note that in the merge of do_clone_file_range(), the file_start_write() context was reduced to cover ->remap_file_range() without holding it over the permission hooks, which was the reason for doing the regressing commit in the first place. Reported-and-tested-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202401312229.eddeb9a6-oliver.sang@intel.com Fixes: dfad37051ade ("remap_range: move permission hooks out of do_clone_file_range()") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20240202102258.1582671-1-amir73il@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-06serial: core: introduce uart_port_tx_flags()Jiri Slaby (SUSE)
And an enum with a flag: UART_TX_NOSTOP. To NOT call __port->ops->stop_tx() when the circular buffer is empty. mxs-uart needs this (see the next patch). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: stable <stable@kernel.org> Tested-by: Emil Kronborg <emil.kronborg@protonmail.com> Link: https://lore.kernel.org/r/20240201105557.28043-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-06net: phy: constify phydev->drvRussell King (Oracle)
Device driver structures are shared between all devices that they match, and thus nothing should never write to the device driver structure through the phydev->drv pointer. Let's make this pointer const to catch code that attempts to do so. Suggested-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1rVxXt-002YqY-9G@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-06hrtimer: Report offline hrtimer enqueueFrederic Weisbecker
The hrtimers migration on CPU-down hotplug process has been moved earlier, before the CPU actually goes to die. This leaves a small window of opportunity to queue an hrtimer in a blind spot, leaving it ignored. For example a practical case has been reported with RCU waking up a SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that way a sched/rt timer to the local offline CPU. Make sure such situations never go unnoticed and warn when that happens. Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com
2024-02-05net/mlx5: Remove initial segmentation duplicate definitionsGal Pressman
Device definitions belong in mlx5_ifc, remove the duplicates in mlx5_core.h. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-11 21:48:41 +0000