| Age | Commit message (Collapse) | Author |
|---|
|
Forward declare struct inode and remove the include statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-6-tzimmermann@suse.de
|
|
Forward declare struct backlight_device and remove the include
statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-5-tzimmermann@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Six hotfixes. Three are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
mm: cachestat: fix folio read-after-free in cache walk
MAINTAINERS: add memory mapping entry with reviewers
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
kasan: revert eviction of stack traces in generic mode
stackdepot: use variable size records for non-evictable entries
|
|
No filesystems depend on it anymore, and it is generally a bad idea.
Since all dentries should have the same set of dentry operations in
case-insensitive capable filesystems, it should be propagated through
->s_d_op.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-11-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
In preparation to drop the similar helper that sets d_op at lookup time,
add a version to set the right d_op filesystem-wide, through sb->s_d_op.
The operations structures are shared across filesystems supporting
fscrypt and/or casefolding, therefore we can keep it in common libfs
code.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-7-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
When a key is added, existing directory dentries in the
DCACHE_NOKEY_NAME form are moved by the VFS to the plaintext version.
But, since they have the DCACHE_OP_REVALIDATE flag set, revalidation
will be done at each lookup only to return immediately, since plaintext
dentries can't go stale until eviction. This patch optimizes this case,
by dropping the flag once the nokey_name dentry becomes plain-text.
Note that non-directory dentries are not moved this way, so they won't
be affected.
Of course, this can only be done if fscrypt is the only thing requiring
revalidation for a dentry. For this reason, we only disable
d_revalidate if the .d_revalidate hook is fscrypt_d_revalidate itself.
It is safe to do it here because when moving the dentry to the
plain-text version, we are holding the d_lock. We might race with a
concurrent RCU lookup but this is harmless because, at worst, we will
get an extra d_revalidate on the keyed dentry, which will still find the
dentry to be valid.
Finally, now that we do more than just clear the DCACHE_NOKEY_NAME in
fscrypt_handle_d_move, skip it entirely for plaintext dentries, to avoid
extra costs.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-5-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
Unencrypted and encrypted-dentries where the key is available don't need
to be revalidated by fscrypt, since they don't go stale from under VFS
and the key cannot be removed for the encrypted case without evicting
the dentry. Disable their d_revalidate hook on the first lookup, to
avoid repeated revalidation later. This is done in preparation to always
configuring d_op through sb->s_d_op.
The only part detail is that, since the filesystem might have other
features that require revalidation, we only apply this optimization if
the d_revalidate handler is fscrypt_d_revalidate itself.
Finally, we need to clean the dentry->flags even for unencrypted
dentries, so the ->d_lock might be acquired even for them. In order to
avoid doing it for filesystems that don't care about fscrypt at all, we
peek ->d_flags without the lock at first, and only acquire it if we
actually need to write the flag.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-4-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
Both fscrypt_prepare_lookup_partial and fscrypt_prepare_lookup will set
DCACHE_NOKEY_NAME for dentries when the key is not available. Extract
out a helper to set this flag in a single place, in preparation to also
add the optimization that will disable ->d_revalidate if possible.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-3-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
overlayfs relies on the filesystem setting DCACHE_OP_HASH or
DCACHE_OP_COMPARE to reject mounting over case-insensitive directories.
Since commit bb9cd9106b22 ("fscrypt: Have filesystems handle their
d_ops"), we set ->d_op through a hook in ->d_lookup, which
means the root dentry won't have them, causing the mount to accidentally
succeed.
In v6.7-rc7, the following sequence will succeed to mount, but any
dentry other than the root dentry will be a "weird" dentry to ovl and
fail with EREMOTE.
mkfs.ext4 -O casefold lower.img
mount -O loop lower.img lower
mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work ovl /mnt
Mounting on a subdirectory fails, as expected, because DCACHE_OP_HASH
and DCACHE_OP_COMPARE are properly set by ->lookup.
Fix by explicitly rejecting superblocks that allow case-insensitive
dentries. Yes, this will be solved when we move d_op configuration back
to ->s_d_op. Yet, we better have an explicit fix to avoid messing up
again.
While there, re-sort the entries to have more descriptive error messages
first.
Fixes: bb9cd9106b22 ("fscrypt: Have filesystems handle their d_ops")
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-2-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
To streamline the transition from tasklets to worqueues, a new helper
function, from_work(), is introduced. This helper, inspired by existing
from_() patterns, utilizes container_of() and eliminates the redundancy
of declaring variable types, leading to more concise and readable code.
The modified code snippet demonstrates the enhanced clarity achieved
with from_wq():
void callback(struct work_struct *w)
{
- struct some_data_structure *local = container_of(w,
struct some_data_structure,
work);
+ struct some_data_structure *local = from_work(local, w, work);
This change aims to facilitate a smoother transition and uphold code
quality standards.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git disable_work-v3
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Normally we do an extra roundtrip for retries even if the buffer pool has
depleted, as we don't check that upfront. Rather than add this check, have
the buffer selection methods mark the request with REQ_F_BL_EMPTY if the
used buffer group is out of buffers after this selection. This is very
cheap to do once we're all the way inside there anyway, and it gives the
caller a chance to make better decisions on how to proceed.
For example, recv/recvmsg multishot could check this flag when it
decides whether to keep receiving or not.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a WMI event driver has no_notify_data set, then it indicates
support for WMI events which provide no notify data, otherwise
the notify() callback expects a valid ACPI object as notify data.
However if a WMI event driver which requires notify data is bound
to a WMI event device which cannot retrieve such data due to the
_WED ACPI method being absent, then the driver will be dysfunctional
since all WMI events will be dropped due to the missing notify data.
Fix this by not allowing such WMI event drivers to bind to WMI event
devices which do not support retrieving of notify data. Also reword
the description of no_notify_data a bit.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240219115919.16526-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
All of the thermal_zone_device_register_with_trips() callers pass zero
writable trip points masks to it, so drop the mask argument from that
function and update all of its callers accordingly.
This also removes the artificial trip points per zone limit of 32,
related to using writable trip points masks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
None of the users of the thermal core provides a .set_trip_hyst()
thermal zone operation, so drop that callback from struct
thermal_zone_device_ops and update trip_point_hyst_store()
accordingly.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
In order to allow thermal zone creators to specify the writability of
trip point temperature and hysteresis on a per-trip basis, add a flags
field to struct thermal_trip and define flags to represent the desired
trip properties.
Also make thermal_zone_device_register_with_trips() set the
THERMAL_TRIP_FLAG_RW_TEMP flag for all trips covered by the writable
trips mask passed to it and modify the thermal sysfs code to look at
the trip flags instead of using the writable trips mask directly or
checking the presence of the .set_trip_hyst() zone callback.
Additionally, make trip_point_temp_store() and trip_point_hyst_store()
fail with an error code if the trip passed to one of them has
THERMAL_TRIP_FLAG_RW_TEMP or THERMAL_TRIP_FLAG_RW_HYST,
respectively, clear in its flags.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Conflicts:
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/intel.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This was already defined locally by init/main.c, but let's make
it generic, as arch/x86/kernel/cpu/topology.c is going to make
use of it to have more uniform code.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
bringup_nonboot_cpus() gets passed the 'setup_max_cpus'
variable in init/main.c - which is also the name of the parameter,
shadowing the name.
To reduce confusion and to allow the 'setup_max_cpus' value
to be #defined in the <linux/smp.h> header, use the 'max_cpus'
name for the function parameter name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes a possible UAF in if_nlmsg_size(),
which can run without RTNL.
Add rcu protection to "struct dpll_pin"
Move netdev_dpll_pin() from netdevice.h to dpll.h to
decrease name pollution.
Note: This looks possible to no longer acquire RTNL in
netdev_dpll_pin_assign() later in net-next.
v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko)
Fixes: 5f1842692880 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'rcu-exp.2024.02.14a', 'rcu-tasks.2024.02.26a' and 'rcu-misc.2024.02.14a' into rcu.2024.02.26a
|
|
We only provide iterators for requested GPIOs to provider drivers. In
order to allow them to display debug information about all GPIOs, let's
provide a variant for iterating over all GPIOs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This adds a new spi_optimize_message() function that can be used to
optimize SPI messages that are used more than once. Peripheral drivers
that use the same message multiple times can use this API to perform SPI
message validation and controller-specific optimizations once and then
reuse the message while avoiding the overhead of revalidating the
message on each spi_(a)sync() call.
Internally, the SPI core will also call this function for each message
if the peripheral driver did not explicitly call it. This is done to so
that controller drivers don't have to have multiple code paths for
optimized and non-optimized messages.
A hook is provided for controller drivers to perform controller-specific
optimizations.
Suggested-by: Martin Sperl <kernel@martin.sperl.org>
Link: https://lore.kernel.org/linux-spi/39DEC004-10A1-47EF-9D77-276188D2580C@martin.sperl.org/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240219-mainline-spi-precook-message-v2-1-4a762c6701b9@baylibre.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This rewrites the max8998 regulator driver to fetch the dvs
regulators as descriptors. This will likely mostly come from
the device tree since there are no in-tree users of the platform
data, but supplying GPIO descriptor tables from board files is
also possible if needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-5-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This rewrites the max8997 regulator driver to fetch the dvs
regulators as descriptors. This will likely mostly come from
the device tree since there are no in-tree users of the platform
data, but supplying GPIO descriptor tables from board files is
also possible if needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-4-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This converts the LP8788 BUCK regulator driver to use GPIO
descriptors.
BUCK1 can use one DVS GPIO and BUCK2 can use two DVS GPIOS,
and no more so just hardcode two GPIO descriptors into
the per-DVS state containers.
Obtain the descriptors from each regulators subdevice.
As there are no in-tree users, board files need to populate
descriptor tables for the buck regulator devices when
they want to use this driver. BUCK1 need a GPIO descriptor
at index 0 and BUCK2 needs two GPIO descriptors at
indices 0 and 1.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-3-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DA9055 regulator was touched before, requireing enable GPIOs
to be passed from pdata.
As we have a device for each regulator, obtain the three gpios
ren ("regulator enable"), rsel ("regulator select") and the
ena ("enable") GPIO associated with the regulator enable
directly from the device and cut down on the amount of
GPIO numbers passed as platform data.
The ren and rsel are just requested as inputs: these are
actually handled by hardware. The ena gpios are driven
actively by the regulator core.
There are no in-tree users, but the regulators are instantiated
from the (undocumed) device tree nodes with "dlg,da9055-regulator"
as compatible, and by simply adding regulator-enable-gpios,
regulator-select-gpios and enable-gpios to this DT node, all
will work as before.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-2-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The dvs gpio was still using a legacy number passed from the
platform data. There are no in-tree users of the platform data
so just switch it to a gpio descriptor and obtain it in probe(),
the device tree users will work just as fine with this.
Drop the entirely unused enable_gpio from the platform data
as well. The device tree bindings mentions this but the driver
does not look for it and makes no use of it: it should probably
be implemented properly in a separate patch.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-1-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Similarly to RTNL_FLAG_DOIT_UNLOCKED, this new flag
allows dump operations registered via rtnl_register()
or rtnl_register_module() to opt-out from RTNL protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want to use RCU protection instead of RTNL
for inet6_fill_ifinfo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Because of legacy reasons, the TI clksel composite clocks can have
overlapping reg properties, and use a custom ti,bit-shift property.
For the clksel clocks we can start using of the standard reg property
instead of the custom ti,bit-shift property.
To do this, let's add a ti_clk_get_legacy_bit_shift() helper, and make
ti_clk_get_reg_addr() populate the clock bit offset.
This makes it possible to update the devicetree files to use the reg
property one clock at a time.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The timekeeping duty is handed over from the outgoing CPU on stop
machine, then the oneshot tick is stopped right after. Therefore it's
guaranteed that the current CPU isn't the timekeeper upon its last call
to idle.
Besides, calling tick_nohz_idle_stop_tick() while the dying CPU goes
into idle suggests that the tick is going to be stopped while it is
actually stopped already from the appropriate CPU hotplug state.
Remove the confusing call and the obsolete case handling and convert it
to a sanity check that verifies the above assumption.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-16-frederic@kernel.org
|
|
The broadcast shutdown code is executed through a random explicit call
within stop machine from the outgoing CPU.
However the tick broadcast is a midware between the tick callback and
the clocksource, therefore it makes more sense to shut it down after the
tick callback and before the clocksource drivers.
Move it instead to the common tick shutdown CPU hotplug state where
related operations can be ordered from highest to lowest level.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-10-frederic@kernel.org
|
|
During the CPU offlining process, the various timer tick features are
shut down from scattered places, sometimes from teardown callbacks on
stop machine, sometimes through explicit calls, sometimes from the
control CPU after the CPU died. The reason why these shutdown operations
are spread around is not always clear and it makes the tick lifecycle
hard to follow.
The tick should be shut down in order from highest to lowest level:
On stop machine from the dying CPU (high-level):
1) Hand-over the timekeeping duty (tick_handover_do_timer())
2) Cancel the tick implementation called by the clockevent callback
(tick_cancel_sched_timer())
3) Shutdown broadcasting (tick_offline_cpu() / tick_broadcast_offline())
On stop machine from the dying CPU (low-level):
4) Shutdown clockevents drivers (CPUHP_AP_*_TIMER_STARTING states)
From the control CPU after the CPU died (low-level):
5) Shutdown/unregister/cleanup clockevents for the dead CPU
(tick_cleanup_dead_cpu())
Instead the current order is 2, 4 (both from CPU hotplug states), then
1 and 3 through direct calls. This layout and order don't make much
sense. The operations 1, 2, 3 should be gathered together and in order.
Sort this situation with creating a new TICK shut-down CPU hotplug state
and start with introducing the timekeeping duty hand-over there. The
state must precede hrtimers migration because the tick hrtimer will be
stopped from it in a further patch.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-8-frederic@kernel.org
|
|
Minor typo in the suspend description.
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240216155022.79371-1-marcel.hamer@windriver.com
|
|
Use existing typedef for dma_filter_fn to avoid duplicating type
definition.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240208202113.630190-1-krzysztof.kozlowski@linaro.org
|
|
The SLAB_KASAN flag prevents merging of caches in some configurations,
which is handled in a rather complicated way via kasan_never_merge().
Since we now have a generic SLAB_NO_MERGE flag, we can instead use it
for KASAN caches in addition to SLAB_KASAN in those configurations,
and simplify the SLAB_NEVER_MERGE handling.
Tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The values of SLAB_ cache creation flags are defined by hand, which is
tedious and error-prone. Use an enum to assign the bit number and a
__SLAB_FLAG_BIT() macro to #define the final flags.
This renumbers the flag values, which is OK as they are only used
internally.
Also define a __SLAB_FLAG_UNUSED macro to assign value to flags disabled
by their respective config options in a unified and sparse-friendly way.
Reviewed-and-tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed. SLUB instead relies on the page allocator's NUMA policies.
Change the flag's value to 0 to free up the value it had, and mark it
for full removal once all users are gone.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20240131172027.10f64405@gandalf.local.home/
Reviewed-and-tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
tb_domain_type, tb_retimer_type, tb_switch_type, usb4_port_device_type,
tb_service_type and tb_xdomain_type variables to be constant structures as
well, placing it into read-only memory which can not be modified at
runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com> # Tegra
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com> # Samsung
Link: https://lore.kernel.org/r/20240220072213.35779-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Holding a mutex across synchronize_rcu_tasks() and acquiring
that same mutex in code called from do_exit() after its call to
exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop()
results in deadlock. This is by design, because tasks that are far
enough into do_exit() are no longer present on the tasks list, making
it a bit difficult for RCU Tasks to find them, let alone wait on them
to do a voluntary context switch. However, such deadlocks are becoming
more frequent. In addition, lockdep currently does not detect such
deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time
(for example, if it blocks acquiring a mutex), then this task is in an
RCU Tasks quiescent state. And with some adjustments, RCU Tasks could
just as well take advantage of that fact.
This commit therefore adds the data structures that will be needed
to rely on these quiescent states and to eliminate these deadlocks.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Introduce a new notification type UBI_VOLUME_SHUTDOWN to inform users
that a volume is just about to be removed.
This is needed because users (such as the NVMEM subsystem) expect that
at the time their removal function is called, the parenting device is
still available (for removal of sysfs nodes, for example, in case of
NVMEM which otherwise WARNs on volume removal).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Add min_alarm and max_alarm attributes for humidityX to support devices
that can generate these alarms.
Such attributes already exist for other magnitudes such as tempX.
Tested with a ChipCap 2 temperature-humidity sensor.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-2-260bea05cf9b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull RCU pathwalk fixes from Al Viro:
"We still have some races in filesystem methods when exposed to RCU
pathwalk. This series is a result of code audit (the second round of
it) and it should deal with most of that stuff.
Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate().
Up to maintainers (a note for NTFS folks - when documentation says
that a method may not block, it *does* imply that blocking allocations
are to be avoided. Really)"
[ More explanations for people who aren't familiar with the vagaries of
RCU path walking: most of it is hidden from filesystems, but if a
filesystem actively participates in the low-level path walking it
needs to make sure the fields involved in that walk are RCU-safe.
That "actively participate in low-level path walking" includes things
like having its own ->d_hash()/->d_compare() routines, or by having
its own directory permission function that doesn't just use the common
helpers. Having a ->d_revalidate() function will also have this issue.
Note that instead of making everything RCU safe you can also choose to
abort the RCU pathwalk if your operation cannot be done safely under
RCU, but that obviously comes with a performance penalty. One common
pattern is to allow the simple cases under RCU, and abort only if you
need to do something more complicated.
So not everything needs to be RCU-safe, and things like the inode etc
that the VFS itself maintains obviously already are. But these fixes
tend to be about properly RCU-delaying things like ->s_fs_info that
are maintained by the filesystem and that got potentially released too
early. - Linus ]
* tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4_get_link(): fix breakage in RCU mode
cifs_get_link(): bail out in unsafe case
fuse: fix UAF in rcu pathwalks
procfs: make freeing proc_fs_info rcu-delayed
procfs: move dropping pde and pid from ->evict_inode() to ->free_inode()
nfs: fix UAF on pathwalk running into umount
nfs: make nfs_set_verifier() safe for use in RCU pathwalk
afs: fix __afs_break_callback() / afs_drop_open_mmap() race
hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info
exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper
affs: free affs_sb_info with kfree_rcu()
rcu pathwalk: prevent bogus hard errors from may_lookup()
fs/super.c: don't drop ->s_user_ns until we free struct super_block itself
|
|
Pull vfs fixes from Al Viro:
"A couple of fixes - revert of regression from this cycle and a fix for
erofs failure exit breakage (had been there since way back)"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
erofs: fix handling kern_mount() failure
Revert "get rid of DCACHE_GENOCIDE"
|
|
http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.9
IIO Backend support
===================
New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.
New device support
==================
adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.
Features
========
tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
The ID is actually a PCI ID belonging to realtech. No response was received
to earlier attempts to notify them of this.
The manufacturers of some devices have replied to say they will not fix
this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
driver (it appears these parts share a windows driver).
Both drivers perform an ID check that is safe on the other part before
successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
for the series reverted in 6.8 that correctly handles all the potential
channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.
Cleanup
=======
Various minor typo fixes and better use of defines etc.
Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
the complexity of __maybe_unused of ifdef guards. To avoid use in
new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
iio_device_release_direct_mode() using scope_cond_guard().
In many drivers this is combined with other automated cleanup
to give maximum simplifications.
An initial set of drivers are converted over to this infrastructure.
Tools
- Use rewinddir() instead of seekdir() to return to start of file.
core
- Make iio_bus_type constant.
adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
these were useful given they were wrong for vast majority of supported
devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
an IIO consumer and IIO producer at the same time.
* tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits)
iio: imu: bmi323: Add ACPI Match Table
iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
iio: adc: ti-ads1298: Add driver
dt-bindings: iio: adc: ti-ads1298: Add bindings
iio: pressure: hsc030pa add triggered buffer
iio: pressure: hsc030pa add mandatory delay
iio: pressure: hsc030pa: update datasheet URLs
iio: pressure: hsc030pa: include cleanup
iio: pressure: hsc030pa: use signed type to hold div_64() result
dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
iio: st_sensors: lsm9ds0: Don't use "proxy" headers
iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
iio: adc: adi-axi-adc: move to backend framework
iio: adc: ad9467: convert to backend framework
iio: add the IIO backend framework
iio: buffer-dmaengine: export buffer alloc and free functions
of: property: add device link support for io-backends
dt-bindings: adc: axi-adc: update bindings for backend framework
dt-bindings: adc: ad9467: add new io-backend property
...
|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-29-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
