| Age | Commit message (Collapse) | Author |
|---|
|
Same change as previous patch. Only difference:
no need to handle NULL template_ops parameter, the only caller
(arptable_filter) always passes non-NULL argument.
This removes all remaining accesses to net->ipv4.arptable_filter.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
iptable_x modules rely on 'struct net' to contain a pointer to the
table that should be evaluated.
In order to remove these pointers from struct net, pass them via
the 'priv' pointer in a similar fashion as nf_tables passes the
rule data.
To do that, duplicate the nf_hook_info array passed in from the
iptable_x modules, update the ops->priv pointers of the copy to
refer to the table and then change the hookfn implementations to
just pass the 'priv' argument to the traverser.
After this patch, the xt_table pointers can already be removed
from struct net.
However, changes to struct net result in re-compile of the entire
network stack, so do the removal after arptables and ip6tables
have been converted as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
and again, this time for arptables.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Same as the previous patch, but for ip6tables.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
xtables stores the xt_table structs in the struct net. This isn't
needed anymore, the structures could be passed via the netfilter hook
'private' pointer to the hook functions, which would allow us to remove
those pointers from struct net.
As a first step, reduce the number of accesses to the
net->ipv4.ip6table_{raw,filter,...} pointers.
This allows the tables to get unregistered by name instead of having to
pass the raw address.
The xt_table structure cane looked up by name+address family instead.
This patch is useless as-is (the backends still have the raw pointer
address), but it lowers the bar to remove those.
It also allows to put the 'was table registered in the first place' check
into ip_tables.c rather than have it in each table sub module.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This will be used to obtain the xt_table struct given address family and
table name.
Followup patches will reduce the number of direct accesses to the xt_table
structures via net->ipv{4,6}.ip(6)table_{nat,mangle,...} pointers, then
remove them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Its the same function as ipt_unregister_table_exit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ebtables stores the table internal data (what gets passed to the
ebt_do_table() interpreter) in struct net.
nftables keeps the internal interpreter format in pernet lists
and passes it via the netfilter core infrastructure (priv pointer).
Do the same for ebtables: the nf_hook_ops are duplicated via kmemdup,
then the ops->priv pointer is set to the table that is being registered.
After that, the netfilter core passes this table info to the hookfn.
This allows to remove the pointers from struct net.
Same pattern can be applied to ip/ip6/arptables.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the IDXD performance monitor capability (named 'perfmon' in
the DSA (Data Streaming Accelerator) spec [1]), which supports the
collection of information about key events occurring during DSA and
IAX (Intel Analytics Accelerator) device execution, to assist in
performance tuning and debugging.
The idxd perfmon support is implemented as part of the IDXD driver and
interfaces with the Linux perf framework. It has several features in
common with the existing uncore pmu support:
- it does not support sampling
- does not support per-thread counting
However it also has some unique features not present in the core and
uncore support:
- all general-purpose counters are identical, thus no event constraints
- operation is always system-wide
While the core perf subsystem assumes that all counters are by default
per-cpu, the uncore pmus are socket-scoped and use a cpu mask to
restrict counting to one cpu from each socket. IDXD counters use a
similar strategy but expand the scope even further; since IDXD
counters are system-wide and can be read from any cpu, the IDXD perf
driver picks a single cpu to do the work (with cpu hotplug notifiers
to choose a different cpu if the chosen one is taken off-line).
More specifically, the perf userspace tool by default opens a counter
for each cpu for an event. However, if it finds a cpumask file
associated with the pmu under sysfs, as is the case with the uncore
pmus, it will open counters only on the cpus specified by the cpumask.
Since perfmon only needs to open a single counter per event for a
given IDXD device, the perfmon driver will create a sysfs cpumask file
for the device and insert the first cpu of the system into it. When a
user uses perf to open an event, perf will open a single counter on
the cpu specified by the cpu mask. This amounts to the default
system-wide rather than per-cpu counting mentioned previously for
perfmon pmu events. In order to keep the cpu mask up-to-date, the
driver implements cpu hotplug support for multiple devices, as IDXD
usually enumerates and registers more than one idxd device.
The perfmon driver implements basic perfmon hardware capability
discovery and configuration, and is initialized by the IDXD driver's
probe function. During initialization, the driver retrieves the total
number of supported performance counters, the pmu ID, and the device
type from idxd device, and registers itself under the Linux perf
framework.
The perf userspace tool can be used to monitor single or multiple
events depending on the given configuration, as well as event groups,
which are also supported by the perfmon driver. The user configures
events using the perf tool command-line interface by specifying the
event and corresponding event category, along with an optional set of
filters that can be used to restrict counting to specific work queues,
traffic classes, page and transfer sizes, and engines (See [1] for
specifics).
With the configuration specified by the user, the perf tool issues a
system call passing that information to the kernel, which uses it to
initialize the specified event(s). The event(s) are opened and
started, and following termination of the perf command, they're
stopped. At that point, the perfmon driver will read the latest count
for the event(s), calculate the difference between the latest counter
values and previously tracked counter values, and display the final
incremental count as the event count for the cycle. An overflow
handler registered on the IDXD irq path is used to account for counter
overflows, which are signaled by an overflow interrupt.
Below are a couple of examples of perf usage for monitoring DSA events.
The following monitors all events in the 'engine' category. Becuuse
no filters are specified, this captures all engine events for the
workload, which in this case is 19 iterations of the work generated by
the kernel dmatest module.
Details describing the events can be found in Appendix D of [1],
Performance Monitoring Events, but briefly they are:
event 0x1: total input data processed, in 32-byte units
event 0x2: total data written, in 32-byte units
event 0x4: number of work descriptors that read the source
event 0x8: number of work descriptors that write the destination
event 0x10: number of work descriptors dispatched from batch descriptors
event 0x20: number of work descriptors dispatched from work queues
# perf stat -e dsa0/event=0x1,event_category=0x1/,
dsa0/event=0x2,event_category=0x1/,
dsa0/event=0x4,event_category=0x1/,
dsa0/event=0x8,event_category=0x1/,
dsa0/event=0x10,event_category=0x1/,
dsa0/event=0x20,event_category=0x1/
modprobe dmatest channel=dma0chan0 timeout=2000
iterations=19 run=1 wait=1
Performance counter stats for 'system wide':
5,332 dsa0/event=0x1,event_category=0x1/
5,327 dsa0/event=0x2,event_category=0x1/
19 dsa0/event=0x4,event_category=0x1/
19 dsa0/event=0x8,event_category=0x1/
0 dsa0/event=0x10,event_category=0x1/
19 dsa0/event=0x20,event_category=0x1/
21.977436186 seconds time elapsed
The command below illustrates filter usage with a simple example. It
specifies that MEM_MOVE operations should be counted for the DSA
device dsa0 (event 0x8 corresponds to the EV_MEM_MOVE event - Number
of Memory Move Descriptors, which is part of event category 0x3 -
Operations. The detailed category and event IDs are available in
Appendix D, Performance Monitoring Events, of [1]). In addition to
the event and event category, a number of filters are also specified
(the detailed filter values are available in Chapter 6.4 (Filter
Support) of [1]), which will restrict counting to only those events
that meet all of the filter criteria. In this case, the filters
specify that only MEM_MOVE operations that are serviced by work queue
wq0 and specifically engine number engine0 and traffic class tc0
having sizes between 0 and 4k and page size of between 0 and 1G result
in a counter hit; anything else will be filtered out and not appear in
the final count. Note that filters are optional - any filter not
specified is assumed to be all ones and will pass anything.
# perf stat -e dsa0/filter_wq=0x1,filter_tc=0x1,filter_sz=0x7,
filter_eng=0x1,event=0x8,event_category=0x3/
modprobe dmatest channel=dma0chan0 timeout=2000
iterations=19 run=1 wait=1
Performance counter stats for 'system wide':
19 dsa0/filter_wq=0x1,filter_tc=0x1,filter_sz=0x7,
filter_eng=0x1,event=0x8,event_category=0x3/
21.865914091 seconds time elapsed
The output above reflects that the unspecified workload resulted in
the counting of 19 MEM_MOVE operation events that met the filter
criteria.
[1]: https://software.intel.com/content/www/us/en/develop/download/intel-data-streaming-accelerator-preliminary-architecture-specification.html
[ Based on work originally by Jing Lin. ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: https://lore.kernel.org/r/0c5080a7d541904c4ad42b848c76a1ce056ddac7.1619276133.git.zanussi@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make include/config/foo/bar.h fake deps files generation simpler.
* delete .h suffix
those aren't header files, shorten filenames,
* delete tolower()
Linux filesystems can deal with both upper and lowercase
filenames very well,
* put everything in 1 directory
Presumably 'mkdir -p' split is from dark times when filesystems
handled huge directories badly, disks were round adding to
seek times.
x86_64 allmodconfig lists 12364 files in include/config.
../obj/include/config/
├── 104_QUAD_8
├── 60XX_WDT
├── 64BIT
...
├── ZSWAP_DEFAULT_ON
├── ZSWAP_ZPOOL_DEFAULT
└── ZSWAP_ZPOOL_DEFAULT_ZBUD
0 directories, 12364 files
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, clang LTO built vmlinux won't work with pahole.
LTO introduced cross-cu dwarf tag references and broke
current pahole model which handles one cu as a time.
The solution is to merge all cu's as one pahole cu as in [1].
We would like to do this merging only if cross-cu dwarf
references happens. The LTO build mode is a pretty good
indication for that.
In earlier version of this patch ([2]), clang flag
-grecord-gcc-switches is proposed to add to compilation flags
so pahole could detect "-flto" and then merging cu's.
This will increate the binary size of 1% without LTO though.
Arnaldo suggested to use a note to indicate the vmlinux
is built with LTO. Such a cheap way to get whether the vmlinux
is built with LTO or not helps pahole but is also useful
for tracing as LTO may inline/delete/demote global functions,
promote static functions, etc.
So this patch added an elfnote with a new type LINUX_ELFNOTE_LTO_INFO.
The owner of the note is "Linux".
With gcc 8.4.1 and clang trunk, without LTO, I got
$ readelf -n vmlinux
Displaying notes found in: .notes
Owner Data size Description
...
Linux 0x00000004 func
description data: 00 00 00 00
...
With "readelf -x ".notes" vmlinux", I can verify the above "func"
with type code 0x101.
With clang thin-LTO, I got the same as above except the following:
description data: 01 00 00 00
which indicates the vmlinux is built with LTO.
[1] https://lore.kernel.org/bpf/20210325065316.3121287-1-yhs@fb.com/
[2] https://lore.kernel.org/bpf/20210331001623.2778934-1-yhs@fb.com/
Suggested-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc4 (x86-64)
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip and irqdomain updates from Marc Zyngier:
New HW support:
- New driver for the Nuvoton WPCM450 interrupt controller
- New driver for the IDT 79rc3243x interrupt controller
- Add support for interrupt trigger configuration to the MStar irqchip
- Add more external interrupt support to the STM32 irqchip
- Add new compatible strings for QCOM SC7280 to the qcom-pdc binding
Fixes and cleanups:
- Drop irq_create_strict_mappings() and irq_create_identity_mapping()
from the irqdomain API, with cleanups in a couple of drivers
- Fix nested NMI issue with spurious interrupts on GICv3
- Don't allow GICv4.1 vSGIs when the CPU doesn't support them
- Various cleanups and minor fixes
Link: https://lore.kernel.org/r/20210424094640.1731920-1-maz@kernel.org
|
|
Total vports are already stored during eswitch initialization. Instead
of calculating everytime, read directly from eswitch.
Additionally, host PF's SF vport information is available using
QUERY_HCA_CAP command. It is not available through HCA_CAP of the
eswitch manager PF.
Hence, this patch prepares the return total eswitch vport count from the
existing eswitch struct.
This further helps to keep eswitch port counting macros and logic within
eswitch.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5_eswitch_get_total_vports() doesn't honor MLX5_ESWICH Kconfig flag.
When MLX5_ESWITCH is disabled, FS layer continues to initialize eswitch
specific ACL namespaces.
Instead, start honoring MLX5_ESWITCH flag and perform vport specific
initialization only when vport count is non zero.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
"Save and restore the sysconfig register in gpio-omap to fix a
power-management issue"
* tag 'gpio-fixes-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: omap: Save and restore sysconfig
|
|
The jiffies-based off_on_delay implementation has a couple of problems
that cause it to sometimes not actually delay for the required time:
(1) If, for example, the off_on_delay time is equivalent to one jiffy,
and the ->last_off_jiffy is set just before a new jiffy starts,
then _regulator_do_enable() does not wait at all since it checks
using time_before().
(2) When jiffies overflows, the value of "remaining" becomes higher
than "max_delay" and the code simply proceeds without waiting.
Fix these problems by changing it to use ktime_t instead.
[Note that since jiffies doesn't start at zero but at INITIAL_JIFFIES
("-5 minutes"), (2) above also led to the code not delaying if
the first regulator_enable() is called when the ->last_off_jiffy is not
initialised, such as for regulators with ->constraints->boot_on set.
It's not clear to me if this was intended or not, but I've preserved
this behaviour explicitly with the check for a non-zero ->last_off.]
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20210423114524.26414-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.13
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
|
|
Add an alternate API by which the cache can be accessed through a kiocb,
doing async DIO, rather than using the current API that tells the cache
where all the pages are.
The new API is intended to be used in conjunction with the netfs helper
library. A filesystem must pick one or the other and not mix them.
Filesystems wanting to use the new API must #define FSCACHE_USE_NEW_IO_API
before #including the header. This prevents them from continuing to use
the old API at the same time as there are incompatibilities in how the
PG_fscache page bit is used.
Changes:
v6:
- Provide a routine to shape a write so that the start and length can be
aligned for DIO[3].
v4:
- Use the vfs_iocb_iter_read/write() helpers[1]
- Move initial definition of fscache_begin_read_operation() here.
- Remove a commented-out line[2]
- Combine ki->term_func calls in cachefiles_read_complete()[2].
- Remove explicit NULL initialiser[2].
- Remove extern on func decl[2].
- Put in param names on func decl[2].
- Remove redundant else[2].
- Fill out the kdoc comment for fscache_begin_read_operation().
- Rename fs/fscache/page2.c to io.c to match later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216102614.GA27555@lst.de/ [1]
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [2]
Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/161118142558.1232039.17993829899588971439.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161037850.2537118.8819808229350326503.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340402057.1303470.8038373593844486698.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539545919.286939.14573472672781434757.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653801477.2770958.10543270629064934227.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789084517.6155.12799689829859169640.stgit@warthog.procyon.org.uk/ # v6
|
|
Add an interface to the netfs helper library for reading data from the
cache instead of downloading it from the server and support for writing
data just downloaded or cleared to the cache.
The API passes an iov_iter to the cache read/write routines to indicate the
data/buffer to be used. This is done using the ITER_XARRAY type to provide
direct access to the netfs inode's pagecache.
When the netfs's ->begin_cache_operation() method is called, this must fill
in the cache_resources in the netfs_read_request struct, including the
netfs_cache_ops used by the helper lib to talk to the cache. The helper
lib does not directly access the cache.
Changes:
v6:
- Call trace_netfs_read() after beginning the cache op so that the cookie
debug ID can be logged[3].
- Don't record the error from writing to the cache. We don't want to pass
it back to the netfs[4].
- Fix copy-to-cache subreq amalgamation to not round up as it goes along
otherwise it overcalculates the length of the write[5].
v5:
- Use end_page_fscache() rather than unlock_page_fscache()[2].
v4:
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
- Add missing inc of netfs_n_rh_read stat.
- Move initial definition of fscache_begin_read_operation() elsewhere.
- Need to call op->begin_cache_operation() from netfs_write_begin().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4]
Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5]
Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
|
|
Add a helper to do the pre-reading work for the netfs write_begin address
space op.
Changes
v6:
- Fixed a missing rreq put in netfs_write_begin()[3].
- Use DEFINE_READAHEAD()[4].
v5:
- Made the wait for PG_fscache in netfs_write_begin() killable[2].
v4:
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/161781042127.463527.9154479794406046987.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/1234933.1617886271@warthog.procyon.org.uk/ [4]
Link: https://lore.kernel.org/r/160588543960.3465195.2792938973035886168.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118140165.1232039.16418853874312234477.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161035539.2537118.15674887534950908530.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340398368.1303470.11242918276563276090.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539541541.286939.1889738674057013729.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653798616.2770958.17213315845968485563.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789080530.6155.1011847312392330491.stgit@warthog.procyon.org.uk/ # v6
|
|
Gather statistics from the netfs interface that can be exported through a
seqfile. This is intended to be called by a later patch when viewing
/proc/fs/fscache/stats.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161118139247.1232039.10556850937548511068.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161034669.2537118.2761232524997091480.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340397101.1303470.17581910581108378458.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539539959.286939.6794352576462965914.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653797700.2770958.5801990354413178228.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789079281.6155.17141344853277186500.stgit@warthog.procyon.org.uk/ # v6
|
|
Add three tracepoints to track the activity of the read helpers:
(1) netfs/netfs_read
This logs entry to the read helpers and also expansion of the range in
a readahead request.
(2) netfs/netfs_rreq
This logs the progress of netfs_read_request objects which track
read requests. A read request may be a compound of multiple
subrequests.
(3) netfs/netfs_sreq
This logs the progress of netfs_read_subrequest objects, which track
the contributions from various sources to a read request.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161118138060.1232039.5353374588021776217.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161033468.2537118.14021843889844001905.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340395843.1303470.7355519662919639648.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539538693.286939.10171713520419106334.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653796447.2770958.1870655382450862155.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789078003.6155.17814844411672989942.stgit@warthog.procyon.org.uk/ # v6
|
|
Add a pair of helper functions:
(*) netfs_readahead()
(*) netfs_readpage()
to do the work of handling a readahead or a readpage, where the page(s)
that form part of the request may be split between the local cache, the
server or just require clearing, and may be single pages and transparent
huge pages. This is all handled within the helper.
Note that while both will read from the cache if there is data present,
only netfs_readahead() will expand the request beyond what it was asked to
do, and only netfs_readahead() will write back to the cache.
netfs_readpage(), on the other hand, is synchronous and only fetches the
page (which might be a THP) it is asked for.
The netfs gives the helper parameters from the VM, the cache cookie it
wants to use (or NULL) and a table of operations (only one of which is
mandatory):
(*) expand_readahead() [optional]
Called to allow the netfs to request an expansion of a readahead
request to meet its own alignment requirements. This is done by
changing rreq->start and rreq->len.
(*) clamp_length() [optional]
Called to allow the netfs to cut down a subrequest to meet its own
boundary requirements. If it does this, the helper will generate
additional subrequests until the full request is satisfied.
(*) is_still_valid() [optional]
Called to find out if the data just read from the cache has been
invalidated and must be reread from the server.
(*) issue_op() [required]
Called to ask the netfs to issue a read to the server. The subrequest
describes the read. The read request holds information about the file
being accessed.
The netfs can cache information in rreq->netfs_priv.
Upon completion, the netfs should set the error, transferred and can
also set FSCACHE_SREQ_CLEAR_TAIL and then call
fscache_subreq_terminated().
(*) done() [optional]
Called after the pages have been unlocked. The read request is still
pinning the file and mapping and may still be pinning pages with
PG_fscache. rreq->error indicates any error that has been
accumulated.
(*) cleanup() [optional]
Called when the helper is disposing of a finished read request. This
allows the netfs to clear rreq->netfs_priv.
Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built
even if CONFIG_FSCACHE=n and in this case much of it should be optimised
away, allowing the filesystem to use it even when caching is disabled.
Changes:
v5:
- Comment why netfs_readahead() is putting pages[2].
- Use page_file_mapping() rather than page->mapping[2].
- Use page_index() rather than page->index[2].
- Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an
appropriate ref too[4].
v4:
- Folded in a kerneldoc comment fix.
- Folded in a fix for the error handling in the case that ENOMEM occurs.
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4]
Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
|
|
Add set/end/wait_on_page_fscache() as aliases of
set/end/wait_page_private_2(). These allow a page to marked with
PG_fscache, the flag to be removed and waiters woken and waiting for the
flag to be cleared. A ref on the page is also taken and dropped.
[Linus suggested putting the fscache-themed functions into the
caching-specific headers rather than pagemap.h[1]]
Changes:
v5:
- Mirror the changes to the core routines[2].
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/161340393568.1303470.4997526899111310530.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539536093.286939.5076448803512118764.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/161653793873.2770958.12157243390965814502.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789075327.6155.7432127924219092385.stgit@warthog.procyon.org.uk/ # v6
|
|
Move the PG_fscache related helper funcs (such as SetPageFsCache()) to
linux/netfs.h rather than linux/fscache.h as the intention is to move to a
model where they're used by the network filesystem and the helper library,
but not by fscache/cachefiles itself.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161340392347.1303470.18065131603507621762.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539534516.286939.6265142985563005000.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653792959.2770958.5386546945273988117.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789073997.6155.18442271115255650614.stgit@warthog.procyon.org.uk/ # v6
|
|
Provide a function, readahead_expand(), that expands the set of pages
specified by a readahead_control object to encompass a revised area with a
proposed size and length.
The proposed area must include all of the old area and may be expanded yet
more by this function so that the edges align on (transparent huge) page
boundaries as allocated.
The expansion will be cut short if a page already exists in either of the
areas being expanded into. Note that any expansion made in such a case is
not rolled back.
This will be used by fscache so that reads can be expanded to cache granule
boundaries, thereby allowing whole granules to be stored in the cache, but
there are other potential users also.
Changes:
v6:
- Fold in a patch from Matthew Wilcox to tell the ondemand readahead
algorithm about the expansion so that the next readahead starts at the
right place[2].
v4:
- Moved the declaration of readahead_expand() to a better place[1].
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christoph Hellwig <hch@lst.de>
cc: Mike Marshall <hubcap@omnibond.com>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210217161358.GM2858050@casper.infradead.org/ [1]
Link: https://lore.kernel.org/r/20210407201857.3582797-4-willy@infradead.org/ [2]
Link: https://lore.kernel.org/r/159974633888.2094769.8326206446358128373.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588479816.3465195.553952688795241765.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118131787.1232039.4863969952441067985.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161028670.2537118.13831420617039766044.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340389201.1303470.14353807284546854878.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539530488.286939.18085961677838089157.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653789422.2770958.2108046612147345000.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789069829.6155.4295672417565512161.stgit@warthog.procyon.org.uk/ # v6
|
|
Turn the comments into kernel-doc and improve the wording slightly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20210407201857.3582797-3-willy@infradead.org/
Link: https://lore.kernel.org/r/161789068619.6155.1397999970593531574.stgit@warthog.procyon.org.uk/ # v6
|
|
For readahead_expand(), we need to modify the file ra_state, so pass it
down by adding it to the ractl. We have to do this because it's not always
the same as f_ra in the struct file that is already being passed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20210407201857.3582797-2-willy@infradead.org/
Link: https://lore.kernel.org/r/161789067431.6155.8063840447229665720.stgit@warthog.procyon.org.uk/ # v6
|
|
Add three functions to manipulate PG_private_2:
(*) set_page_private_2() - Set the flag and take an appropriate reference
on the flagged page.
(*) end_page_private_2() - Clear the flag, drop the reference and wake up
any waiters, somewhat analogously with end_page_writeback().
(*) wait_on_page_private_2() - Wait for the flag to be cleared.
Wrappers will need to be placed in the netfs lib header in the patch that
adds that.
[This implements a suggestion by Linus[1] to not mix the terminology of
PG_private_2 and PG_fscache in the mm core function]
Changes:
v7:
- Use compound_head() in all the functions to make them THP safe[6].
v5:
- Add set and end functions, calling the end function end rather than
unlock[3].
- Keep a ref on the page when PG_private_2 is set[4][5].
v4:
- Remove extern from the declaration[2].
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/20210216102659.GA27714@lst.de/ [2]
Link: https://lore.kernel.org/r/161340387944.1303470.7944159520278177652.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539528910.286939.1252328699383291173.stgit@warthog.procyon.org.uk # v4
Link: https://lore.kernel.org/r/20210321105309.GG3420@casper.infradead.org [3]
Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4]
Link: https://lore.kernel.org/r/CAHk-=wjSGsRj7xwhSMQ6dAQiz53xA39pOG+XA_WeTgwBBu4uqg@mail.gmail.com/ [5]
Link: https://lore.kernel.org/r/20210408145057.GN2531743@casper.infradead.org/ [6]
Link: https://lore.kernel.org/r/161653788200.2770958.9517755716374927208.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789066013.6155.9816857201817288382.stgit@warthog.procyon.org.uk/ # v6
|
|
Add an iterator, ITER_XARRAY, that walks through a set of pages attached to
an xarray, starting at a given page and offset and walking for the
specified amount of bytes. The iterator supports transparent huge pages.
The iterate_xarray() macro calls the helper function with rcu_access()
helped. I think that this is only a problem for iov_iter_for_each_range()
- and that returns an error for ITER_XARRAY (also, this function does not
appear to be called).
The caller must guarantee that the pages are all present and they must be
locked using PG_locked, PG_writeback or PG_fscache to prevent them from
going away or being migrated whilst they're being accessed.
This is useful for copying data from socket buffers to inodes in network
filesystems and for transferring data between those inodes and the cache
using direct I/O.
Whilst it is true that ITER_BVEC could be used instead, that would require
a bio_vec array to be allocated to refer to all the pages - which should be
redundant if inode->i_pages also points to all these pages.
Note that older versions of this patch implemented an ITER_MAPPING instead,
which was almost the same.
Changes:
v7:
- Rename iter_xarray_copy_pages() to iter_xarray_populate_pages()[1].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3577430.1579705075@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/158861205740.340223.16592990225607814022.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465785214.1376674.6062549291411362531.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588477334.3465195.3608963255682568730.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118129703.1232039.17141248432017826976.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161026313.2537118.14676007075365418649.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340386671.1303470.10752208972482479840.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539527815.286939.14607323792547049341.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653786033.2770958.14154191921867463240.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789064740.6155.11932541175173658065.stgit@warthog.procyon.org.uk/ # v6
Link: https://lore.kernel.org/r/27c369a8f42bb8a617672b2dc0126a5c6df5a050.camel@kernel.org [1]
|
|
In order to use the same driver on non-OF platforms, make
of_mmc_spi.c resource provider agnostic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210419112459.25241-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc_of_parse() for a few years has been using device property API.
Convert mmc_of_parse_voltage() as well.
At the same time switch users to new API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210419112459.25241-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The alignment of a structure is that of its largest member. On
architectures like 32-bit Arm (but not e.g. 32-bit x86) 64-bit integers
will require 64-bit alignment and not its natural word size.
This means that there is no portable way to add 64-bit integers to
siginfo_t on 32-bit architectures without breaking the ABI, because
siginfo_t does not yet (and therefore likely never will) contain 64-bit
fields on 32-bit architectures. Adding a 64-bit integer could change the
alignment of the union after the 3 initial int si_signo, si_errno,
si_code, thus introducing 4 bytes of padding shifting the entire union,
which would break the ABI.
One alternative would be to use the __packed attribute, however, it is
non-standard C. Given siginfo_t has definitions outside the Linux kernel
in various standard libraries that can be compiled with any number of
different compilers (not just those we rely on), using non-standard
attributes on siginfo_t should be avoided to ensure portability.
In the case of the si_perf field, word size is sufficient since there is
no exact requirement on size, given the data it contains is user-defined
via perf_event_attr::sig_data. On 32-bit architectures, any excess bits
of perf_event_attr::sig_data will therefore be truncated when copying
into si_perf.
Since si_perf is intended to disambiguate events (e.g. encoding relevant
information if there are more events of the same type), 32 bits should
provide enough entropy to do so on 32-bit architectures.
For 64-bit architectures, no change is intended.
Fixes: fb6cc127e0b6 ("signal: Introduce TRAP_PERF si_code and si_perf to siginfo")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lkml.kernel.org/r/20210422191823.79012-1-elver@google.com
|
|
DWMAC Core 5.20 onwards supports HW descriptor prefetching.
Additionally, it also depends on platform specific RTL configuration.
This capability could be enabled by setting DMA_Mode bit-19 (DCHE).
So, to enable this cability, platform must set plat->dma_cfg->dche = true
and the DWMAC core version must be 5.20 onwards. Else, this capability
wouldn`t be configured
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These 3 system calls are designed to be used by unprivileged processes
to sandbox themselves:
* landlock_create_ruleset(2): Creates a ruleset and returns its file
descriptor.
* landlock_add_rule(2): Adds a rule (e.g. file hierarchy access) to a
ruleset, identified by the dedicated file descriptor.
* landlock_restrict_self(2): Enforces a ruleset on the calling thread
and its future children (similar to seccomp). This syscall has the
same usage restrictions as seccomp(2): the caller must have the
no_new_privs attribute set or have CAP_SYS_ADMIN in the current user
namespace.
All these syscalls have a "flags" argument (not currently used) to
enable extensibility.
Here are the motivations for these new syscalls:
* A sandboxed process may not have access to file systems, including
/dev, /sys or /proc, but it should still be able to add more
restrictions to itself.
* Neither prctl(2) nor seccomp(2) (which was used in a previous version)
fit well with the current definition of a Landlock security policy.
All passed structs (attributes) are checked at build time to ensure that
they don't contain holes and that they are aligned the same way for each
architecture.
See the user and kernel documentation for more details (provided by a
following commit):
* Documentation/userspace-api/landlock.rst
* Documentation/security/landlock.rst
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Link: https://lore.kernel.org/r/20210422154123.13086-9-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
|
|
The sb_delete security hook is called when shutting down a superblock,
which may be useful to release kernel objects tied to the superblock's
lifetime (e.g. inodes).
This new hook is needed by Landlock to release (ephemerally) tagged
struct inodes. This comes from the unprivileged nature of Landlock
described in the next commit.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-7-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
|
|
Move management of the superblock->sb_security blob out of the
individual security modules and into the security infrastructure.
Instead of allocating the blobs from within the modules, the modules
tell the infrastructure how much space is required, and the space is
allocated there.
Cc: John Johansen <john.johansen@canonical.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-6-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
|
|
|
|
Currently, RSS hash input is not available to AVF by ethtool, it is set
by the PF directly.
Add the RSS configure support for AVF through new virtchnl message, and
define the capability flag VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF to query this
new RSS offload support.
Signed-off-by: Jia Guo <jia.guo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Tested-by: Bo Chen <BoX.C.Chen@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As the hardware is capable of supporting UDP segmentation offload, add a
capability bit to virtchnl.h to communicate this and have the driver
advertise its support.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Declare bitmap of allowed commands on VF. Initialize default
opcodes list that should be always supported. Declare array of
supported opcodes for each caps used in virtchnl code.
Change allowed bitmap by setting or clearing corresponding
bit to allowlist (bit set) or denylist (bit clear).
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
No user of this helper is left, remove it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
GIC CPU interfaces versions predating GIC v4.1 were not built to
accommodate vINTID within the vSGI range; as reported in the GIC
specifications (8.2 "Changes to the CPU interface"), it is
CONSTRAINED UNPREDICTABLE to deliver a vSGI to a PE with
ID_AA64PFR0_EL1.GIC < b0011.
Check the GIC CPUIF version by reading the SYS_ID_AA64_PFR0_EL1.
Disable vSGIs if a CPUIF version < 4.1 is detected to prevent using
vSGIs on systems where they may misbehave.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210317100719.3331-2-lorenzo.pieralisi@arm.com
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
perf_pmu_name() and perf_num_counters() are unused. Drop them.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210414134409.1266357-6-maz@kernel.org
|
|
thermal_notify_framework just updates for a single trip point where as
thermal_zone_device_update does other bookkeeping like updating the
temperature of the thermal zone and setting the next trip point. The only
driver that was using thermal_notify_framework was updated in the previous
patch to use thermal_zone_device_update instead. Since there are no users
for thermal_notify_framework remove it.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210122023406.3500424-3-thara.gopinath@linaro.org
|
|
The uart_unlock_and_check_sysrq() helper can be used to defer processing
of sysrq until the interrupt handler has released the port lock and is
about to return.
Since commit 81e2073c175b ("genirq: Disable interrupts for force
threaded handlers") interrupt handlers that are not explicitly requested
as threaded are always called with interrupts disabled and there is no
need to save the interrupt state when taking the port lock.
Instead of adding another sysrq helper for when the interrupt state has
not needlessly been saved, drop the state parameter from
uart_unlock_and_check_sysrq() and update its callers to no longer
explicitly disable interrupts in their interrupt handlers.
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210416140557.25177-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
