| Age | Commit message (Collapse) | Author |
|---|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
|
Introduce the new helper for_each_node_numadist() to iterate over node
IDs in order of increasing NUMA distance from a given starting node.
This iterator is somehow similar to for_each_numa_hop_mask(), but
instead of providing a cpumask at each iteration, it provides a node ID.
Example usage:
nodemask_t unvisited = NODE_MASK_ALL;
int node, start = cpu_to_node(smp_processor_id());
node = start;
for_each_node_numadist(node, unvisited)
pr_info("node (%d, %d) -> %d\n",
start, node, node_distance(start, node));
On a system with equidistant nodes:
$ numactl -H
...
node distances:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 20
2: 20 20 10 20
3: 20 20 20 10
Output of the example above (on node 0):
[ 7.367022] node (0, 0) -> 10
[ 7.367151] node (0, 1) -> 20
[ 7.367186] node (0, 2) -> 20
[ 7.367247] node (0, 3) -> 20
On a system with non-equidistant nodes (simulated using virtme-ng):
$ numactl -H
...
node distances:
node 0 1 2 3
0: 10 51 31 41
1: 51 10 21 61
2: 31 21 10 11
3: 41 61 11 10
Output of the example above (on node 0):
[ 8.953644] node (0, 0) -> 10
[ 8.953712] node (0, 2) -> 31
[ 8.953764] node (0, 3) -> 41
[ 8.953817] node (0, 1) -> 51
Suggested-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Introduce the new helper nearest_node_nodemask() to find the closest
node in a specified nodemask from a given starting node.
Returns MAX_NUMNODES if no node is found.
Suggested-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Nodemasks now pull linux/numa.h for MAX_NUMNODES and NUMA_NO_NODE
macros. This series makes numa.h depending on nodemasks, so we hit
a circular dependency.
Nodemasks library is highly employed by NUMA code, and it would be
logical to resolve the circular dependency by making NUMA headers
dependent nodemask.h.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Nodemasks API misses the plain nodes_copy() which is required in this
series.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add backend support for setting oversampling ratio.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250214131955.31973-4-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add backend support for setting the data size used.
This setting can be adjusted within the IP cores interfacing devices.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250214131955.31973-3-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add backend support for obtaining the interface type used.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250214131955.31973-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Alive Clock and Power Manager (ACPM) Message Protocol is defined for
the purpose of communication between the ACPM firmware and masters
(AP, AOC, ...). ACPM firmware operates on the Active Power Management
(APM) module that handles overall power activities.
ACPM and masters regard each other as independent hardware component and
communicate with each other using mailbox messages and shared memory.
This protocol driver provides the interface for all the client drivers
making use of the features offered by the APM. Add ACPM protocol support.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250213-gs101-acpm-v9-2-8b0281b93c8b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Using RCU lifetime rules to access kernfs_node::name can avoid the
trouble with kernfs_rename_lock in kernfs_name() and kernfs_path_from_node()
if the fs was created with KERNFS_ROOT_INVARIANT_PARENT. This is usefull
as it allows to implement kernfs_path_from_node() only with RCU
protection and avoiding kernfs_rename_lock. The lock is only required if
the __parent node can be changed and the function requires an unchanged
hierarchy while it iterates from the node to its parent.
The change is needed to allow the lookup of the node's path
(kernfs_path_from_node()) from context which runs always with disabled
preemption and or interrutps even on PREEMPT_RT. The problem is that
kernfs_rename_lock becomes a sleeping lock on PREEMPT_RT.
I went through all ::name users and added the required access for the lookup
with a few extensions:
- rdtgroup_pseudo_lock_create() drops all locks and then uses the name
later on. resctrl supports rename with different parents. Here I made
a temporal copy of the name while it is used outside of the lock.
- kernfs_rename_ns() accepts NULL as new_parent. This simplifies
sysfs_move_dir_ns() where it can set NULL in order to reuse the current
name.
- kernfs_rename_ns() is only using kernfs_rename_lock if the parents are
different. All users use either kernfs_rwsem (for stable path view) or
just RCU for the lookup. The ::name uses always RCU free.
Use RCU lifetime guarantees to access kernfs_node::name.
Suggested-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot+6ea37e2e6ffccf41a7e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/67251dc6.050a0220.529b6.015e.GAE@google.com/
Reported-by: Hillf Danton <hdanton@sina.com>
Closes: https://lore.kernel.org/20241102001224.2789-1-hdanton@sina.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-7-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kernfs_rename_lock is used to obtain stable kernfs_node::{name|parent}
pointer. This is a preparation to access kernfs_node::parent under RCU
and ensure that the pointer remains stable under the RCU lifetime
guarantees.
For a complete path, as it is done in kernfs_path_from_node(), the
kernfs_rename_lock is still required in order to obtain a stable parent
relationship while computing the relevant node depth. This must not
change while the nodes are inspected in order to build the path.
If the kernfs user never moves the nodes (changes the parent) then the
kernfs_rename_lock is not required and the RCU guarantees are
sufficient. This "restriction" can be set with
KERNFS_ROOT_INVARIANT_PARENT. Otherwise the lock is required.
Rename kernfs_node::parent to kernfs_node::__parent to denote the RCU
access and use RCU accessor while accessing the node.
Make cgroup use KERNFS_ROOT_INVARIANT_PARENT since the parent here can
not change.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-6-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GCC can see that the value range for "order" is capped, but this leads
it to consider that it might be negative, leading to a false positive
warning (with GCC 15 with -Warray-bounds -fdiagnostics-details):
../drivers/net/ethernet/mellanox/mlx4/alloc.c:691:47: error: array subscript -1 is below array bounds of 'long unsigned int *[2]' [-Werror=array-bounds=]
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o);
| ~~~~~~~~~~~^~~
'mlx4_alloc_db_from_pgdir': events 1-2
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | | | | (2) out of array bounds here
| (1) when the condition is evaluated to true In file included from ../drivers/net/ethernet/mellanox/mlx4/mlx4.h:53,
from ../drivers/net/ethernet/mellanox/mlx4/alloc.c:42:
../include/linux/mlx4/device.h:664:33: note: while referencing 'bits'
664 | unsigned long *bits[2];
| ^~~~
Switch the argument to unsigned int, which removes the compiler needing
to consider negative values.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250210174504.work.075-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As all PCS are using the neg_mode parameter rather than the legacy
an_mode, remove the ability to use the legacy an_mode. We remove the
tests in the phylink code, unconditionally passing the PCS neg_mode
parameter to PCS methods, and remove setting the flag from drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tidPn-0040hd-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Helper phy_is_internal() is just used in two places phylib-internally.
So let's remove it from the API.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/f3f35265-80a9-4ed7-ad78-ae22c21e288b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phy_queue_state_machine() isn't used outside phy.c,
so stop exporting it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/16986d3d-7baf-4b02-a641-e2916d491264@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stop exporting feature arrays which aren't used outside phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/01886672-4880-4ca8-b7b0-94d40f6e0ec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
outside phylib
Certain fixup-related definitions aren't used outside phy_device.c.
So make them private and remove them from phy.h.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ea6fde13-9183-4c7c-8434-6c0eb64fc72c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KVM fixes for 6.14 part 1
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
|
|
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute
into account when placing the kernel image in memory at boot.
Otherwise, the presence of the kernel image could prevent such a
memory region from being unplugged at runtime if it was 'cold
plugged', i.e., already plugged in at boot time (and exposed via the
EFI memory map).
This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory
attribute is used consistently by Linux before it ever turns up in
production, ensuring that we can make meaningful use of it without
running the risk of regressing existing users"
* tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Use BIT_ULL() constants for memory attributes
efi: Avoid cold plugged memory for placing the kernel
|
|
Make xpcs_config_eee() private to the XPCS driver, called only from
the phylink pcs_disable_eee() and pcs_enable_eee() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQT-003w7O-Ec@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a function to separate out the EEE clock multiplying factor. This
will be called by the stmmac driver to configure this value.
It would have been better had the driver used the CLK API to retrieve
this clock, get its rate and calculate the appropriate multiplier, but
that door has closed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ8-003w70-VT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are hooks in the stmmac driver into XPCS to control the EEE
settings when LPI is configured at the MAC. This bypasses the layering.
To allow this to be removed from the stmmac driver, add two new
methods for PCS to inform them when the LPI/EEE enablement state
changes at the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ3-003w6u-RH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor clock management in EQoS driver for code reuse and to avoid
redundancy. This way, only minimal changes are required when a new platform
is added.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Swathi K S <swathi.ks@samsung.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213041559.106111-1-swathi.ks@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fix for request rejection for batch addition
- Fix a few issues for bogus mac partition tables
* tag 'block-6.14-20250214' of git://git.kernel.dk/linux:
partitions: mac: fix handling of bogus partition table
block: cleanup and fix batch completion adding conditions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
|
|
Enable support for VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC, to enable the VF
driver the ability to determine what Rx descriptor formats are
available. This requires sending an additional message during
initialization and reset, the VIRTCHNL_OP_GET_SUPPORTED_RXDIDS. This
operation requests the supported Rx descriptor IDs available from the
PF.
This is treated the same way that VLAN V2 capabilities are handled. Add
a new set of extended capability flags, used to process send and receipt
of the VIRTCHNL_OP_GET_SUPPORTED_RXDIDS message.
This ensures we finish negotiating for the supported descriptor formats
prior to beginning configuration of receive queues.
This change stores the supported format bitmap into the iavf_adapter
structure. Additionally, if VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC is enabled
by the PF, we need to make sure that the Rx queue configuration
specifies the format.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Support for allowing VF to negotiate the descriptor format requires that
the VF specify which descriptor format to use when requesting Rx queues.
The VF is supposed to request the set of supported formats via the new
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS, and then set one of the supported
formats in the rxdid field of the virtchnl_rxq_info structure.
The virtchnl.h header does not provide an enumeration of the format
values. The existing implementations in the PF directly use the values
from the DDP package.
Make the formats explicit by defining an enumeration of the RXDIDs.
Provide an enumeration for the values as well as the bit positions as
returned by the supported_rxdids data from the
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To support Rx timestamp offload, VIRTCHNL_OP_1588_PTP_CAPS is sent by
the VF to request PTP capability and responded by the PF what capability
is enabled for that VF.
Hardware captures timestamps which contain only 32 bits of nominal
nanoseconds, as opposed to the 64bit timestamps that the stack expects.
To convert 32b to 64b, we need a current PHC time.
VIRTCHNL_OP_1588_PTP_GET_TIME is sent by the VF and responded by the
PF with the current PHC time.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for allowing a VF to enable PTP feature - Rx timestamps
The new capability is gated by VIRTCHNL_VF_CAP_PTP, which must be
set by the VF to request access to the new operations. In addition, the
VIRTCHNL_OP_1588_PTP_CAPS command is used to determine the specific
capabilities available to the VF.
This support includes the following additional capabilities:
* Rx timestamps enabled in the Rx queues (when using flexible advanced
descriptors)
* Read access to PHC time over virtchnl using
VIRTCHNL_OP_1588_PTP_GET_TIME
Extra space is reserved in most structures to allow for future
extension (like set clock, Tx timestamps). Additional opcode numbers
are reserved and space in the virtchnl_ptp_caps structure is
specifically set aside for this.
Additionally, each structure has some space reserved for future
extensions to allow some flexibility.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It is possible to correctly do aging without taking the KVM MMU lock,
or while taking it for read; add a Kconfig to let architectures do so.
Architectures that select KVM_MMU_LOCKLESS_AGING are responsible for
correctness.
Suggested-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-3-jthoughton@google.com
[sean: massage shortlog+changelog, fix Kconfig goof and shorten name]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The handoff between the boot stubs and start_secondary() are before IBT is
enabled and is definitely not subject to kCFI. As such, suppress all that for
this function.
Notably when the ENDBR poison would become fatal (ud1 instead of nop) this will
trigger a tripple fault because we haven't set up the IDT to handle #UD yet.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.509520369@infradead.org
|
|
With the introduction of kCFI the addition of ENDBR to
SYM_FUNC_START* no longer suffices to make the function indirectly
callable. This now requires the use of SYM_TYPED_FUNC_START.
As such, remove the implicit ENDBR from SYM_FUNC_START* and add some
explicit annotations to fix things up again.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.409116003@infradead.org
|
|
Depends on the simplifications from commit 1d7e707af446 ("Revert "x86/module: prepare module loading for ROX allocations of text"")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
This reverts commit 5a14fead07bcf4e0acc877a8d9e1d1f40a441153.
No architectures ever implemented `enable_nmi` since the later patches
in the series adding it never landed. It's been a long time. Drop it.
NOTE: this is not a clean revert due to changes in the file in the
meantime.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250129082535.3.I2254953cd852f31f354456689d68b2d910de3fbe@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 0c57dfcc6c1d037243c2f8fbf62eab3633326ec0.
The functionality was supoosed to be used by a later patch in the
series that never landed [1]. Drop it.
NOTE: part of functionality was already reverted by commit
39d0be87438a ("serial: kgdb_nmi: Remove unused knock code"). Also note
that this revert is not a clean revert given code changes that have
happened in the meantime.
It's obvious that nobody is using this code since the two exposed
functions (kgdb_register_nmi_console() and
kgdb_unregister_nmi_console()) are both no-ops if
"arch_kgdb_ops.enable_nmi" is not defined. No architectures define it.
[1] https://lore.kernel.org/lkml/1348522080-32629-9-git-send-email-anton.vorontsov@linaro.org/
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: URL [1]
Link: https://lore.kernel.org/r/20250129082535.1.Ia095eac1ae357f87d23e7af2206741f5d40788f1@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update cros_ec_commands.h to include a definition for PD_EVENT_INIT.
On platforms supporting UCSI, this host event type is sent when the PPM
initializes.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://lore.kernel.org/r/20250204024600.4138776-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the following kfuncs to set and remove xattrs from BPF programs:
bpf_set_dentry_xattr
bpf_remove_dentry_xattr
bpf_set_dentry_xattr_locked
bpf_remove_dentry_xattr_locked
The _locked version of these kfuncs are called from hooks where
dentry->d_inode is already locked. Instead of requiring the user
to know which version of the kfuncs to use, the verifier will pick
the proper kfunc based on the calling hook.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20250130213549.3353349-5-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The core functionality in target_cpu_store() is also needed in a
subsequent patch for automatically changing the CPU when taking
a CPU offline. As such, factor out the body of target_cpu_store()
into new function vmbus_channel_set_cpu() that can also be used
elsewhere.
No functional change is intended.
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250117203309.192072-2-hamzamahfooz@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250117203309.192072-2-hamzamahfooz@linux.microsoft.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
|
|
This patch addresses an issue where some files in case-insensitive
directories become inaccessible due to changes in how the kernel
function, utf8_casefold(), generates case-folded strings from the
commit 5c26d2f1d3f5 ("unicode: Don't special case ignorable code
points").
There are good reasons why this change should be made; it's actually
quite stupid that Unicode seems to think that the characters ❤ and ❤️
should be casefolded. Unfortimately because of the backwards
compatibility issue, this commit was reverted in 231825b2e1ff.
This problem is addressed by instituting a brute-force linear fallback
if a lookup fails on case-folded directory, which does result in a
performance hit when looking up files affected by the changing how
thekernel treats ignorable Uniode characters, or when attempting to
look up non-existent file names. So this fallback can be disabled by
setting an encoding flag if in the future, the system administrator or
the manufacturer of a mobile handset or tablet can be sure that there
was no opportunity for a kernel to insert file names with incompatible
encodings.
Fixes: 5c26d2f1d3f5 ("unicode: Don't special case ignorable code points")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
This reverts commit 011b0335903832facca86cd8ed05d7d8d94c9c76.
Sabrina reports that the revert may trigger warnings due to intervening
changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it
and revisit once that part is also ironed out.
Fixes: 011b03359038 ("Revert "net: skb: introduce and use a single page frag cache"")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove commented out code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250211102057.587182-1-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add SoundWire support for ACP7.0 and ACP7.1 platforms.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-4-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
i2c_of_match_device() is not used anymore outside of I²C framework,
unexport it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix a number of hangs in the netfslib read-retry code, including:
(1) netfs_reissue_read() doubles up the getting of references on
subrequests, thereby leaking the subrequest and causing inode eviction
to wait indefinitely. This can lead to the kernel reporting a hang in
the filesystem's evict_inode().
Fix this by removing the get from netfs_reissue_read() and adding one
to netfs_retry_read_subrequests() to deal with the one place that
didn't double up.
(2) The loop in netfs_retry_read_subrequests() that retries a sequence of
failed subrequests doesn't record whether or not it retried the one
that the "subreq" pointer points to when it leaves the loop. It may
not if renegotiation/repreparation of the subrequests means that fewer
subrequests are needed to span the cumulative range of the sequence.
Because it doesn't record this, the piece of code that discards
now-superfluous subrequests doesn't know whether it should discard the
one "subreq" points to - and so it doesn't.
Fix this by noting whether the last subreq it examines is superfluous
and if it is, then getting rid of it and all subsequent subrequests.
If that one one wasn't superfluous, then we would have tried to go
round the previous loop again and so there can be no further unretried
subrequests in the sequence.
(3) netfs_retry_read_subrequests() gets yet an extra ref on any additional
subrequests it has to get because it ran out of ones it could reuse to
to renegotiation/repreparation shrinking the subrequests.
Fix this by removing that extra ref.
(4) In netfs_retry_reads(), it was using wait_on_bit() to wait for
NETFS_SREQ_IN_PROGRESS to be cleared on all subrequests in the
sequence - but netfs_read_subreq_terminated() is now using a wait
queue on the request instead and so this wait will never finish.
Fix this by waiting on the wait queue instead. To make this work, a
new flag, NETFS_RREQ_RETRYING, is now set around the wait loop to tell
the wake-up code to wake up the wait queue rather than requeuing the
request's work item.
Note that this flag replaces the NETFS_RREQ_NEED_RETRY flag which is
no longer used.
(5) Whilst not strictly anything to do with the hang,
netfs_retry_read_subrequests() was also doubly incrementing the
subreq_counter and re-setting the debug index, leaving a gap in the
trace. This is also fixed.
One of these hangs was observed with 9p and with cifs. Others were forced
by manual code injection into fs/afs/file.c. Firstly, afs_prepare_read()
was created to provide an changing pattern of maximum subrequest sizes:
static int afs_prepare_read(struct netfs_io_subrequest *subreq)
{
struct netfs_io_request *rreq = subreq->rreq;
if (!S_ISREG(subreq->rreq->inode->i_mode))
return 0;
if (subreq->retry_count < 20)
rreq->io_streams[0].sreq_max_len =
umax(200, 2222 - subreq->retry_count * 40);
else
rreq->io_streams[0].sreq_max_len = 3333;
return 0;
}
and pointed to by afs_req_ops. Then the following:
struct netfs_io_subrequest *subreq = op->fetch.subreq;
if (subreq->error == 0 &&
S_ISREG(subreq->rreq->inode->i_mode) &&
subreq->retry_count < 20) {
subreq->transferred = subreq->already_done;
__clear_bit(NETFS_SREQ_HIT_EOF, &subreq->flags);
__set_bit(NETFS_SREQ_NEED_RETRY, &subreq->flags);
afs_fetch_data_notify(op);
return;
}
was inserted into afs_fetch_data_success() at the beginning and struct
netfs_io_subrequest given an extra field, "already_done" that was set to
the value in "subreq->transferred" by netfs_reissue_read().
When reading a 4K file, the subrequests would get gradually smaller, a new
subrequest would be allocated around the 3rd retry and then eventually be
rendered superfluous when the 20th retry was hit and the limit on the first
subrequest was eased.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250212222402.3618494-2-dhowells@redhat.com
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Steve French <stfrench@microsoft.com>
cc: Ihor Solodrai <ihor.solodrai@pm.me>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For some usecases a consumer driver requires its device to remain power-on
from the PM domain perspective during runtime. Using dev PM qos along with
the genpd governors, doesn't work for this case as would potentially
prevent the device from being runtime suspended too.
To support these usecases, let's introduce dev_pm_genpd_rpm_always_on() to
allow consumers drivers to dynamically control the behaviour in genpd for a
device that is attached to it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1738736156-119203-4-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
