| Age | Commit message (Collapse) | Author |
|---|
|
cc2520 supports both probing from static platform_data and
from devicetree, but there have never been any definitions
of the platform data in the mainline kernel, so it's safe
to assume that only the DT path is used.
After folding cc2520_platform_data into the driver itself,
the GPIO handling can be simplified by moving to the modern
gpiod interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230126161658.2983292-1-arnd@kernel.org
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Add CAP for crypto offload, do the simple initialization if hardware
supports it. Currently set log_dek_obj_range to 12, so 4k DEKs will be
created in one bulk allocation.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Change the naming of key type in DEK fields and macros, to be
consistent with the device spec.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add and extend structure layouts and defines for fast crypto key
update. This is a prerequisite to support bulk creation, key
modification and destruction, software wrapped DEK, and SYNC_CRYPTO
command.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before this patch, the log_obj_range was defined inside
general_obj_in_cmd_hdr to support bulk allocation. However, we need to
modify/query one of the object in the bulk in later patch, so change
those fields to param bits for parameters specific for cmd header, and
add general_obj_create_param according to what was updated in spec.
We will also add general_obj_query_param for modify/query later.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently in phy_init_eee() the driver unconditionally configures the PHY
to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt
storm on my qcs404-base board.
Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible
device RX_CLK continues to run even in Rx LPI state.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
arch_prepare_bpf_trampoline() is used for direct attachment of eBPF
programs to various places, bypassing kprobes. It's responsible for
calling a number of eBPF programs before, instead and/or after
whatever they are attached to.
Add a s390x implementation, paying attention to the following:
- Reuse the existing JIT infrastructure, where possible.
- Like the existing JIT, prefer making multiple passes instead of
backpatching. Currently 2 passes is enough. If literal pool is
introduced, this needs to be raised to 3. However, at the moment
adding literal pool only makes the code larger. If branch
shortening is introduced, the number of passes needs to be
increased even further.
- Support both regular and ftrace calling conventions, depending on
the trampoline flags.
- Use expolines for indirect calls.
- Handle the mismatch between the eBPF and the s390x ABIs.
- Sign-extend fmod_ret return values.
invoke_bpf_prog() produces about 120 bytes; it might be possible to
slightly optimize this, but reaching 50 bytes, like on x86_64, looks
unrealistic: just loading cookie, __bpf_prog_enter, bpf_func, insnsi
and __bpf_prog_exit as literals already takes at least 5 * 12 = 60
bytes, and we can't use relative addressing for most of them.
Therefore, lower BPF_MAX_TRAMP_LINKS on s390x.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-5-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
blkcg_deactivate_policy()
Currently parent pd can be freed before child pd:
t1: remove cgroup C1
blkcg_destroy_blkgs
blkg_destroy
list_del_init(&blkg->q_node)
// remove blkg from queue list
percpu_ref_kill(&blkg->refcnt)
blkg_release
call_rcu
t2: from t1
__blkg_release
blkg_free
schedule_work
t4: deactivate policy
blkcg_deactivate_policy
pd_free_fn
// parent of C1 is freed first
t3: from t2
blkg_free_workfn
pd_free_fn
If policy(for example, ioc_timer_fn() from iocost) access parent pd from
child pd after pd_offline_fn(), then UAF can be triggered.
Fix the problem by delaying 'list_del_init(&blkg->q_node)' from
blkg_destroy() to blkg_free_workfn(), and using a new disk level mutex to
synchronize blkg_free_workfn() and blkcg_deactivate_policy().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230119110350.2287325-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a generic bdev_zone_no() helper to calculate zone number for a
given sector in a block device. This helper internally uses disk_zone_no()
to find the zone number.
Use the helper bdev_zone_no() to calculate nr of zones. This lets us
make modifications to the math if needed in one place.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230110143635.77300-4-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of open coding to check for zone start, add a helper to improve
readability and store the logic in one place.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230110143635.77300-3-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the superfluous request queue check in bdev_is_zoned() as
bdev_get_queue() can never return NULL.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230110143635.77300-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These are almost always used as unsigned integers, so mark them as such.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The protocol uses -1 as a reserved value for
'no specific volume', and since the protocol field
is a 16 bit unsigned value, -1 is converted to
65535. Therefore, limit the range of valid volume
numbers to [0, 65534].
Signed-off-by: Robert Altnoeder <robert.altnoeder@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
See also commit 93c68cc46a07 ("drbd: use consistent license"). We only
want to license drbd under GPL-2.0, so use the corresponding SPDX header
consistently.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To be more similar to what we do in the out-of-tree module and ease the
upstreaming process.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123506.144082-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the genetlink api version as defined in drbd_genl_api.h.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123506.144082-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The user can set the max_sectors limit to any valid value via sysfs
/sys/block/<dev>/queue/max_sectors_kb attribute. If the device limits
are ever rescanned, though, the limit reverts back to the potentially
artificially low BLK_DEF_MAX_SECTORS value.
Preserve the user's setting as the max_sectors limit as long as it's
valid. The user can reset back to defaults by writing 0 to the sysfs
file.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230105205146.3610282-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is used as an unsigned value, so define it that way to avoid
having to cast it.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230105205146.3610282-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There may be different cost for reeading just one byte or more, so it's
benificial to keep ctx flag bits that we access together in a single
byte. That affected code generation of __io_cq_unlock_post_flush() and
removed one memory load.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bbe8ca4705704690319d65e45845f9fc9d35f420.1673887636.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't wake the master task after queueing a deferred tw unless it's
currently waiting in io_cqring_wait.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/717702d772825a6647e6c315b4690277ba84c3fc.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Even though io_poll_wq_wake()'s waitqueue_active reuses a barrier we do
for another waitqueue, it's not going to be the case in the future and
so we want to have a fast path for it when the ring has never been
polled.
Move poll_wq wake ups into __io_commit_cqring_flush() using a new flag
called ->poll_activated. The idea behind the flag is to set it when the
ring was polled for the first time. This requires additional sync to not
miss events, which is done here by using task_work for ->task_complete
rings, and by default enabling the flag for all other types of rings.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/060785e8e9137a920b232c0c7f575b131af19cac.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't use ->cq_wait for ring polling but add a separate wait queue for
it. We need it for following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dea0be0bf990503443c5c6c337fc66824af7d590.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
->submitter_task is used somewhat more frequent now than before, i.e.
for local tw enqueue and run, let's move it from the end of ctx, which
is full of cold data, to the first cacheline with mostly constants.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/415ca91dc5ad1dec612b892e489cda98e1069542.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Try to make the filesystem-level decryption functions in fs/crypto/
aware of large folios. This includes making fscrypt_decrypt_bio()
support the case where the bio contains large folios, and making
fscrypt_decrypt_pagecache_blocks() take a folio instead of a page.
There's no way to actually test this with large folios yet, but I've
tested that this doesn't cause any regressions.
Note that this patch just handles *decryption*, not encryption which
will be a little more difficult.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230127224202.355629-1-ebiggers@kernel.org
|
|
s390x eBPF JIT needs to know whether a function return value is signed
and which function arguments are signed, in order to generate code
compliant with the s390x ABI.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-26-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This way it's possible to query its value from testcases using BTF.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
No one provides wp_gpio, so let's remove it to avoid issues with
the nvmem core putting this gpio.
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no remaining in-tree users of the platform_data,
so this driver can be converted to using the simpler gpiod
interfaces.
Any out-of-tree users that rely on the platform data can
provide the data using the device_property and gpio_lookup
interfaces instead.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230126162323.2986682-1-arnd@kernel.org
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2023-01-28
We've added 124 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 6386 insertions(+), 1827 deletions(-).
The main changes are:
1) Implement XDP hints via kfuncs with initial support for RX hash and
timestamp metadata kfuncs, from Stanislav Fomichev and
Toke Høiland-Jørgensen.
Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk
2) Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case, from Andrii Nakryiko.
3) Significantly reduce the search time for module symbols by livepatch
and BPF, from Jiri Olsa and Zhen Lei.
4) Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs
in different time intervals, from David Vernet.
5) Fix several issues in the dynptr processing such as stack slot liveness
propagation, missing checks for PTR_TO_STACK variable offset, etc,
from Kumar Kartikeya Dwivedi.
6) Various performance improvements, fixes, and introduction of more
than just one XDP program to XSK selftests, from Magnus Karlsson.
7) Big batch to BPF samples to reduce deprecated functionality,
from Daniel T. Lee.
8) Enable struct_ops programs to be sleepable in verifier,
from David Vernet.
9) Reduce pr_warn() noise on BTF mismatches when they are expected under
the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien.
10) Describe modulo and division by zero behavior of the BPF runtime
in BPF's instruction specification document, from Dave Thaler.
11) Several improvements to libbpf API documentation in libbpf.h,
from Grant Seltzer.
12) Improve resolve_btfids header dependencies related to subcmd and add
proper support for HOSTCC, from Ian Rogers.
13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room()
helper along with BPF selftests, from Ziyang Xuan.
14) Simplify the parsing logic of structure parameters for BPF trampoline
in the x86-64 JIT compiler, from Pu Lehui.
15) Get BTF working for kernels with CONFIG_RUST enabled by excluding
Rust compilation units with pahole, from Martin Rodriguez Reboredo.
16) Get bpf_setsockopt() working for kTLS on top of TCP sockets,
from Kui-Feng Lee.
17) Disable stack protection for BPF objects in bpftool given BPF backends
don't support it, from Holger Hoffstätte.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits)
selftest/bpf: Make crashes more debuggable in test_progs
libbpf: Add documentation to map pinning API functions
libbpf: Fix malformed documentation formatting
selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata
selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket.
bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().
bpf/selftests: Verify struct_ops prog sleepable behavior
bpf: Pass const struct bpf_prog * to .check_member
libbpf: Support sleepable struct_ops.s section
bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable
selftests/bpf: Fix vmtest static compilation error
tools/resolve_btfids: Alter how HOSTCC is forced
tools/resolve_btfids: Install subcmd headers
bpf/docs: Document the nocast aliasing behavior of ___init
bpf/docs: Document how nested trusted fields may be defined
bpf/docs: Document cpumask kfuncs in a new file
selftests/bpf: Add selftest suite for cpumask kfuncs
selftests/bpf: Add nested trust selftests suite
bpf: Enable cpumasks to be queried and used as kptrs
bpf: Disallow NULLable pointers for trusted kfuncs
...
====================
Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2023-01-27
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 10 files changed, 170 insertions(+), 59 deletions(-).
The main changes are:
1) Fix preservation of register's parent/live fields when copying
range-info, from Eduard Zingerman.
2) Fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache, from Hou Tao.
3) Fix stack overflow from infinite recursion in sock_map_close(),
from Jakub Sitnicki.
4) Fix missing btf_put() in register_btf_id_dtor_kfuncs()'s error path,
from Jiri Olsa.
5) Fix a splat from bpf_setsockopt() via lsm_cgroup/socket_sock_rcv_skb,
from Kui-Feng Lee.
6) Fix bpf_send_signal[_thread]() helpers to hold a reference on the task,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix the kernel crash caused by bpf_setsockopt().
selftests/bpf: Cover listener cloning with progs attached to sockmap
selftests/bpf: Pass BPF skeleton to sockmap_listen ops tests
bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener
bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself
bpf: Add missing btf_put to register_btf_id_dtor_kfuncs
selftests/bpf: Verify copy_register_state() preserves parent/live fields
bpf: Fix to preserve reg parent/live fields when copying range info
bpf: Fix a possible task gone issue with bpf_send_signal[_thread]() helpers
bpf: Fix off-by-one error in bpf_mem_cache_idx()
====================
Link: https://lore.kernel.org/r/20230127215820.4993-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
418e53401e47 ("ice: move devlink port creation/deletion")
643ef23bd9dd ("ice: Introduce local var for readability")
https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/
https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/
drivers/net/ethernet/engleder/tsnep_main.c
3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues")
25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/
net/netfilter/nf_conntrack_proto_sctp.c
13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths")
f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/
https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Try to make fs/verity/verify.c aware of large folios. This includes
making fsverity_verify_bio() support the case where the bio contains
large folios, and adding a function fsverity_verify_folio() which is the
equivalent of fsverity_verify_page().
There's no way to actually test this with large folios yet, but I've
tested that this doesn't cause any regressions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230127221529.299560-1-ebiggers@kernel.org
|
|
|
|
Currently, filp_close() and generic_shutdown_super() use printk() to log
messages when bugs are detected. This is problematic because infrastructure
like syzkaller has no idea that this message indicates a bug.
In addition, some people explicitly want their kernels to BUG() when kernel
data corruption has been detected (CONFIG_BUG_ON_DATA_CORRUPTION).
And finally, when generic_shutdown_super() detects remaining inodes on a
system without CONFIG_BUG_ON_DATA_CORRUPTION, it would be nice if later
accesses to a busy inode would at least crash somewhat cleanly rather than
walking through freed memory.
To address all three, use CHECK_DATA_CORRUPTION() when kernel bugs are
detected.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
linux/hrtimer.h include was added because apparently it used
to contain ktime related code. This is no longer the case
and we include linux/time.h explicitly.
Sadly this change is currently a noop because linux/dma-mapping.h
and net/page_pool.h pull in half of the universe.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
splice.h is included since commit a60e3cc7c929 ("net: make
skb_splice_bits more configureable") but really even then
all we needed is some forward declarations. Most of that
code is now gone, and remaining has fwd declarations.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
linux/sched.h was added for skb_mstamp_* (all the way back
before linux/sched.h got split and linux/sched/clock.h created).
We don't need it in skbuff.h any more.
Sadly this change is currently a noop because linux/dma-mapping.h
and net/page_pool.h pull in half of the universe.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It used to be necessary for skb_mstamp_* static inlines,
but those are gone since we moved to usec timestamps in
TCP, in 2017.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Number of files depend on linux/sched/clock.h getting included
by linux/skbuff.h which soon will no longer be the case.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This include was added for skb_find_text() but all we need there
is a forward declaration of struct ts_config.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It appears nothing needs it. The kernel builds fine with this
include removed, building an otherwise empty source file with:
#include <linux/skbuff.h>
#ifdef _LINUX_NET_H
#error linux/net.h is back
#endif
works too (meaning net.h is not just pulled in indirectly).
This gives us a slight 0.5% reduction in the pre-processed size
of skbuff.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
linux/net.h will soon not be included by linux/skbuff.h.
Fix the cases where source files were depending on the implicit
include.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a generic [devm_]led_get() method which can be used on both devicetree
and non devicetree platforms to get a LED classdev associated with
a specific function on a specific device, e.g. the privacy LED associated
with a specific camera sensor.
Note unlike of_led_get() this takes a string describing the function
rather then an index. This is done because e.g. camera sensors might
have a privacy LED, or a flash LED, or both and using an index
approach leaves it unclear what the function of index 0 is if there is
only 1 LED.
This uses a lookup-table mechanism for non devicetree platforms.
This allows the platform code to map specific LED class_dev-s to a specific
device,function combinations this way.
For devicetree platforms getting the LED by function-name could be made
to work using the standard devicetree pattern of adding a -names string
array to map names to the indexes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120114524.408368-5-hdegoede@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
virtchnl: update and refactor
Jesse Brandeburg says:
The virtchnl.h file is used by i40e/ice physical function (PF) drivers
and irdma when talking to the iavf driver. This series cleans up the
header file by removing unused elements, adding/cleaning some comments,
fixing the data structures so they are explicitly defined, including
padding, and finally does a long overdue rename of the IWARP members in
the structures to RDMA, since the ice driver and it's associated Intel
Ethernet E800 series adapters support both RDMA and IWARP.
The whole series should result in no functional change, but hopefully
clearer code.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: i40e/iavf: rename iwarp to rdma
virtchnl: do structure hardening
virtchnl: update header and increase header clarity
virtchnl: remove unused structure declaration
====================
Link: https://lore.kernel.org/r/20230125212441.4030014-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Almost all validation logic is in the drivers, but they are
missing reliable way to convey failure reason to userspace
applications.
Let's use extack to return this information to users.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Almost all validation logic is in the drivers, but they are
missing reliable way to convey failure reason to userspace
applications.
Let's use extack to return this information to users.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CONFIG_ETHTOOL_NETLINK=n
ethtool_aggregate_*_stats() are implemented in net/ethtool/stats.c, a
file which is compiled out when CONFIG_ETHTOOL_NETLINK=n. In order to
avoid adding Kbuild dependencies from drivers (which call these helpers)
on CONFIG_ETHTOOL_NETLINK, let's add some shim definitions which simply
make the helpers dead code.
This means the function prototypes should have been located in
include/linux/ethtool_netlink.h rather than include/linux/ethtool.h.
Fixes: 449c5459641a ("net: ethtool: add helpers for aggregate statistics")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230125110214.4127759-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that the i_version counter is reported in struct kstat, there is no
need for this export operation.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
The NFS server has a lot of special handling for different types of
change attribute access, depending on the underlying filesystem. In
most cases, it's doing a getattr anyway and then fetching that value
after the fact.
Rather that do that, add a new STATX_CHANGE_COOKIE flag that is a
kernel-only symbol (for now). If requested and getattr can implement it,
it can fill out this field. For IS_I_VERSION inodes, add a generic
implementation in vfs_getattr_nosec. Take care to mask
STATX_CHANGE_COOKIE off in requests from userland and in the result
mask.
Since not all filesystems can give the same guarantees of monotonicity,
claim a STATX_ATTR_CHANGE_MONOTONIC flag that filesystems can set to
indicate that they offer an i_version value that can never go backward.
Eventually if we decide to make the i_version available to userland, we
can just designate a field for it in struct statx, and move the
STATX_CHANGE_COOKIE definition to the uapi header.
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
The i_version field in the kernel has had different semantics over
the decades, but NFSv4 has certain expectations. Update the comments
in iversion.h to describe when the i_version must change.
Cc: Colin Walters <walters@verbum.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <trondmy@hammerspace.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
