| Age | Commit message (Collapse) | Author |
|---|
|
Default values are defined for the information included in the Medium
Synchronization Delay Information subfield. The spec says to
initialize the values to these defaults and only change them when
included.
Return the default value instead of zero so that the defaults are
used when the field is not included in the association response.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.a7725bef3795.I2d3528cf4af021c5b37f97fbe64ae9116ce9bef1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The helper functions to retrieve the EML capabilities and medium
synchronization delay both assume that the type is correct. Instead of
assuming the length is correct and still checking the type, add a new
helper to check both and don't do any verification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.1b50e7a3b3cf.I9385514d8eb6d6d3c82479a6fa732ef65313e554@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The common information length is found in the first octet of the common
information.
Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.3c7ed4817338.I42ef706cb827b4dade6e4ffbb6e7f341eaccd398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Rename it to ieee80211_mle_basic_sta_prof_size_ok() as it
validates the size of the station profile included in
Basic Multi-Link element.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.9bdfd263974f.I7bebd26894f33716e93cc7da576ef3215e0ba727@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The TBTT information field type must be zero. This is only changed in
the 802.11be draft specification where the value 1 is used to indicate
that only the MLD parameters are included.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.7865606ffe94.I7ff28afb875d1b4c39acd497df8490a7d3628e3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point
set_handle_irq() needs to be called to handle system-wide
interrupts.
For all DT-enabled boards, this call happens down in the
drivers/irqchip subsystem, after locating the target irqchip
driver from the device tree.
We still have a few instances of the boardfiles with machine
descriptors passing a machine-specific .handle_irq() to the
ARM kernel core.
Get rid of this by letting the few remaining machines consistently
call set_handle_irq() from the end of the .init_irq() callback
instead and diet down one member from the machine descriptor.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
'core' and 'x86/amd' into next
|
|
The VIA fbdev exposes a custom GPIO chip for its GPIOs, these
are in turn looked up the camera driver using a custom API.
Drop the custom API, provide a look-up table and convert to
GPIO descriptors. Note proper polarity on the RESET line.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct hdmi_avi_infoframe'
from 68 to 60 bytes.
It saves a few bytes of memory and is more cache-line friendly.
This also reduces the union hdmi_infoframe the same way.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The sys_ni_posix_timers() definition causes a warning when the declaration
is missing, so this needs to be added along with the normal syscalls,
outside of the #ifdef.
kernel/time/posix-stubs.c:26:17: error: no previous prototype for 'sys_ni_posix_timers' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230607142925.3126422-1-arnd@kernel.org
|
|
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
CPU0 CPU1
posix_timer_add()
start = sig->posix_timer_id;
lock(hash_lock);
... posix_timer_add()
if (++sig->posix_timer_id < 0)
start = sig->posix_timer_id;
sig->posix_timer_id = 0;
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock.
Reported-by: syzbot+5c54bd3eb218bb595aa9@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87bkhzdn6g.ffs@tglx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2023-06-16
1) Added a new event handler to firmware sync reset, which is used to
support firmware sync reset flow on smart NIC. Adding this new stage to
the flow enables the firmware to ensure host PFs unload before ECPFs
unload, to avoid race of PFs recovery.
2) Debugfs for mlx5 eswitch bridge offloads
3) Added two new counters for vport stats
4) Minor Fixups and cleanups for net-next branch
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Avoid deadlocks on resume from sleep by delaying scsi rescan until
the scsi device is also fully resumed.
* tag 'ata-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-scsi: Avoid deadlock on rescan after device resume
|
|
Per-VMA locking allows us to lock a struct vm_area_struct without
taking the process-wide mmap lock in read mode.
Consider a process workload where the mmap lock is taken constantly in
write mode. In this scenario, all zerocopy receives are periodically
blocked during that period of time - though in principle, the memory
ranges being used by TCP are not touched by the operations that need
the mmap write lock. This results in performance degradation.
Now consider another workload where the mmap lock is never taken in
write mode, but there are many TCP connections using receive zerocopy
that are concurrently receiving. These connections all take the mmap
lock in read mode, but this does induce a lot of contention and atomic
ops for this process-wide lock. This results in additional CPU
overhead caused by contending on the cache line for this lock.
However, with per-vma locking, both of these problems can be avoided.
As a test, I ran an RPC-style request/response workload with 4KB
payloads and receive zerocopy enabled, with 100 simultaneous TCP
connections. I measured perf cycles within the
find_tcp_vma/mmap_read_lock/mmap_read_unlock codepath, with and
without per-vma locking enabled.
When using process-wide mmap semaphore read locking, about 1% of
measured perf cycles were within this path. With per-VMA locking, this
value dropped to about 0.45%.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is part of the effort to remove the empty element at the end of
ctl_table structs. "child" was a deprecated elem in this struct and was
being used to differentiate between two types of ctl_tables: "normal"
and "permanently emtpy".
What changed?:
* Replace "child" with an enumeration that will have two values: the
default (0) and the permanently empty (1). The latter is left at zero
so when struct ctl_table is created with kzalloc or in a local
context, it will have the zero value by default. We document the
new enum with kdoc.
* Remove the "empty child" check from sysctl_check_table
* Remove count_subheaders function as there is no longer a need to
calculate how many headers there are for every child
* Remove the recursive call to unregister_sysctl_table as there is no
need to traverse down the child tree any longer
* Add a new SYSCTL_PERM_EMPTY_DIR binary flag
* Remove the last remanence of child from partport/procfs.c
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().
However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.
Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Joe Breuer <linux-kernel@jmbreuer.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>
|
|
These commits
a494aef23dfc ("PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg")
2c6ba4216844 ("PCI: hv: Enable PCI pass-thru devices in Confidential VMs")
update the Hyper-V virtual PCI driver to use the hyperv_pcpu_input_arg
because that memory will be correctly marked as decrypted or encrypted
for all VM types (CoCo or normal). But problems ensue when CPUs in the
VM go online or offline after virtual PCI devices have been configured.
When a CPU is brought online, the hyperv_pcpu_input_arg for that CPU is
initialized by hv_cpu_init() running under state CPUHP_AP_ONLINE_DYN.
But this state occurs after state CPUHP_AP_IRQ_AFFINITY_ONLINE, which
may call the virtual PCI driver and fault trying to use the as yet
uninitialized hyperv_pcpu_input_arg. A similar problem occurs in a CoCo
VM if the MMIO read and write hypercalls are used from state
CPUHP_AP_IRQ_AFFINITY_ONLINE.
When a CPU is taken offline, IRQs may be reassigned in state
CPUHP_TEARDOWN_CPU. Again, the virtual PCI driver may fault trying to
use the hyperv_pcpu_input_arg that has already been freed by a
higher state.
Fix the onlining problem by adding state CPUHP_AP_HYPERV_ONLINE
immediately after CPUHP_AP_ONLINE_IDLE (similar to CPUHP_AP_KVM_ONLINE)
and before CPUHP_AP_IRQ_AFFINITY_ONLINE. Use this new state for
Hyper-V initialization so that hyperv_pcpu_input_arg is allocated
early enough.
Fix the offlining problem by not freeing hyperv_pcpu_input_arg when
a CPU goes offline. Retain the allocated memory, and reuse it if
the CPU comes back online later.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Since no in-tree driver supports it, sht3x_platform_data has been
removed and the relevant properties have been moved to sht3x_data.
Signed-off-by: JuenKit Yip <JuenKit_Yip@hotmail.com>
Link: https://lore.kernel.org/r/DB4PR10MB626126FB7226D5AF341197449258A@DB4PR10MB6261.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
iort_pmsi_get_dev_id() has a __weak definition in the driver, and
an override in arm64 specific code, but the declaration is conditional
and not always seen when the copy in the driver gets built:
drivers/irqchip/irq-gic-v3-its-platform-msi.c:41:12: error: no previous prototype for 'iort_pmsi_get_dev_id' [-Werror=missing-prototypes]
Move the existing declaration out of the #ifdef block to ensure
it can be seen in all configurations.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200516.554663-5-arnd@kernel.org
|
|
Building with "W=1" warns about missing declarations for
two functions in the mmp irqchip driver:
drivers/irqchip/irq-mmp.c:248:13: error: no previous prototype for 'icu_init_irq'
drivers/irqchip/irq-mmp.c:271:13: error: no previous prototype for 'mmp2_init_icu'
The declarations are present in an unused header, but since there is no
caller, it's best to just remove the functions and the header completely,
making the driver DT-only to match the state of the platform.
Fixes: 77acc85ce797 ("ARM: mmp: remove device definitions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200516.554663-2-arnd@kernel.org
|
|
As described in commit 8111964f1b85 ("dm thin: Fix ABBA deadlock between
shrink_slab and dm_pool_abort_metadata"), ABBA deadlocks will be
triggered because shrinker_rwsem currently needs to held by
dm_pool_abort_metadata() as a side-effect of thin-pool metadata
operation failure.
The following three problem scenarios have been noticed:
1) Described by commit 8111964f1b85 ("dm thin: Fix ABBA deadlock between
shrink_slab and dm_pool_abort_metadata")
2) shrinker_rwsem and throttle->lock
P1(drop cache) P2(kworker)
drop_caches_sysctl_handler
drop_slab
shrink_slab
down_read(&shrinker_rwsem) - LOCK A
do_shrink_slab
super_cache_scan
prune_icache_sb
dispose_list
evict
ext4_evict_inode
ext4_clear_inode
ext4_discard_preallocations
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_wait_block_bitmap
__ext4_error
ext4_handle_error
ext4_commit_super
...
dm_submit_bio
do_worker
throttle_work_update
down_write(&t->lock) -- LOCK B
process_deferred_bios
commit
metadata_operation_failed
dm_pool_abort_metadata
dm_block_manager_create
dm_bufio_client_create
register_shrinker
down_write(&shrinker_rwsem)
-- LOCK A
thin_map
thin_bio_map
thin_defer_bio_with_throttle
throttle_lock
down_read(&t->lock) - LOCK B
3) shrinker_rwsem and wait_on_buffer
P1(drop cache) P2(kworker)
drop_caches_sysctl_handler
drop_slab
shrink_slab
down_read(&shrinker_rwsem) - LOCK A
do_shrink_slab
...
ext4_wait_block_bitmap
__ext4_error
ext4_handle_error
jbd2_journal_abort
jbd2_journal_update_sb_errno
jbd2_write_superblock
submit_bh
// LOCK B
// RELEASE B
do_worker
throttle_work_update
down_write(&t->lock) - LOCK B
process_deferred_bios
process_bio
commit
metadata_operation_failed
dm_pool_abort_metadata
dm_block_manager_create
dm_bufio_client_create
register_shrinker
register_shrinker_prepared
down_write(&shrinker_rwsem) - LOCK A
bio_endio
wait_on_buffer
__wait_on_buffer
Fix these by resetting dm_bufio_client without holding shrinker_rwsem.
Fixes: 8111964f1b85 ("dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add needed HW bits for querying local loopback counter and the
HCA capability for it.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Added a new event handler to firmware sync reset, which is used to
support firmware sync reset flow on smart NIC. Adding this new stage to
the flow enables the firmware to ensure host PFs unload before ECPFs
unload, to avoid race of PFs recovery.
If firmware sends sync_reset_unload event to driver the driver should
unload and close all HW resources of the function. Once the driver
finishes unloading part, it can't get any more events from firmware as
event queues are closed, so it polls the reset state field to know when
to continue to next stage of the sync reset flow.
Added capability bit for supporting sync_reset_unload event.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Expose new timoueout in Default Timeouts Register to be used on sync
reset flow running on smart NIC. In this flow the driver should know how
much time to wait from getting unload request till firmware will ask the
PF to continue to next stage of the flow.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This fixes a spinlock-initialization regression in SRCU that causes
the SRCU notifier to fail.
The fix simply adds the initialization, but introduces a #ifdef
because there is no spinlock to initialize for the Tiny SRCU used in
!SMP builds.
Yes, it would be nice to abstract this somehow in order to hide it in
SRCU, but I still don't see a good way of doing this"
* tag 'urgent-rcu.2023.06.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
notifier: Initialize new struct srcu_usage field
|
|
vfio-cdx driver enables IOCTLs for user space to query
MMIO regions for CDX devices and mmap them. This change
also adds support for reset of CDX devices. With VFIO
enabled on CDX devices, user-space applications can also
exercise DMA securely via IOMMU on these devices.
This change adds the VFIO CDX driver and enables the following
ioctls for CDX devices:
- VFIO_DEVICE_GET_INFO:
- VFIO_DEVICE_GET_REGION_INFO
- VFIO_DEVICE_RESET
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230531124557.11009-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Now that the direct I/O helpers have switched to use
iov_iter_extract_pages, these helpers are unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230614140341.521331-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that all block direct I/O helpers use page pinning, this flag is
unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230614140341.521331-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
for-6.5/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.5
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel Wagner)"
* tag 'nvme-6.5-2023-06-16' of git://git.infradead.org/nvme: (27 commits)
nvme: forward port sysfs delete fix
nvme: skip optional id ctrl csi if it failed
nvme-core: use nvme_ns_head_multipath instead of ns->head->disk
nvmet-fcloop: Do not wait on completion when unregister fails
nvme-fabrics: open code __nvmf_host_find()
nvme-fabrics: error out to unlock the mutex
nvme: Increase block size variable size to 32-bit
nvme-fcloop: no need to return from void function
nvmet-auth: remove unnecessary break after goto
nvmet-auth: remove some dead code
nvme-core: remove redundant check from nvme_init_ns_head
nvme: move sysfs code to a dedicated sysfs.c file
nvme-fabrics: prevent overriding of existing host
nvme-fabrics: check hostid using uuid_equal
nvme-fabrics: unify common code in admin and io queue connect
nvmet: reorder fields in 'struct nvmefc_fcp_req'
nvmet: reorder fields in 'struct nvme_dhchap_queue_context'
nvmet: reorder fields in 'struct nvmf_ctrl_options'
nvme: reorder fields in 'struct nvme_ctrl'
nvmet: reorder fields in 'struct nvmet_sq'
...
|
|
kthread_park and wait_woken have a similar race that
kthread_stop and wait_woken used to have before it was fixed in
commit cb6538e740d7 ("sched/wait: Fix a kthread race with
wait_woken()"). Extend that fix to also cover kthread_park.
[jstultz: Made changes suggested by Peter to optimize
memory loads]
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20230602212350.535358-1-jstultz@google.com
|
|
All callers of set_sched_topology() are within __init section. Mark
it __init too.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20230603073645.1173332-1-linmiaohe@huawei.com
|
|
Reiji reports that the arm64 implementation of arch_perf_update_userpage()
is now ignored and replaced by the dummy stub in core code.
This seems to happen since the PMUv3 driver was moved to driver/perf.
As it turns out, dropping the __weak attribute from the *prototype*
of the function solves the problem. You're right, this doesn't seem
to make much sense. And yet... It appears that both symbols get
flagged as weak, and that the first one to appear in the link order
wins:
$ nm drivers/perf/arm_pmuv3.o|grep arch_perf_update_userpage
0000000000001db0 W arch_perf_update_userpage
Dropping the attribute from the prototype restores the expected
behaviour, and arm64 is able to enjoy arch_perf_update_userpage()
again.
Fixes: 7755cec63ade ("arm64: perf: Move PMUv3 driver to drivers/perf")
Fixes: f1ec3a517b43 ("kernel/events: Add a missing prototype for arch_perf_update_userpage()")
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Reiji Watanabe <reijiw@google.com>
Link: https://lkml.kernel.org/r/20230616114831.3186980-1-maz@kernel.org
|
|
The ${atomic}_dec_if_positive() ops are unlike all the other conditional
atomic ops. Rather than returning a boolean success value, these return
the value that the atomic variable would be updated to, even when no
update is performed.
We missed this when adding kerneldoc comments, and the documentation for
${atomic}_dec_if_positive() erroneously states:
| Return: @true if @v was updated, @false otherwise.
Ideally we'd clean this up by aligning ${atomic}_dec_if_positive() with
the usual atomic op conventions: with ${atomic}_fetch_dec_if_positive()
for those who care about the value of the varaible, and
${atomic}_dec_if_positive() returning a boolean success value.
In the mean time, align the documentation with the current reality.
Fixes: ad8110706f381170 ("locking/atomic: scripts: generate kerneldoc comments")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20230615132734.1119765-1-mark.rutland@arm.com
|
|
There is a class of interrupt controllers out there that, once they
have signalled a given interrupt number, will still signal incoming
instances of the *same* interrupt despite the original interrupt
not having been EOIed yet.
As long as the new interrupt reaches the *same* CPU, nothing bad
happens, as that CPU still has its interrupts globally disabled,
and we will only take the new interrupt once the interrupt has
been EOIed.
However, things become more "interesting" if an affinity change comes
in while the interrupt is being handled. More specifically, while
the per-irq lock is being dropped. This results in the affinity change
taking place immediately. At this point, there is nothing that prevents
the interrupt from firing on the new target CPU. We end-up with the
interrupt running concurrently on two CPUs, which isn't a good thing.
And that's where things become worse: the new CPU notices that the
interrupt handling is in progress (irq_may_run() return false), and
*drops the interrupt on the floor*.
The whole race looks like this:
CPU 0 | CPU 1
-----------------------------|-----------------------------
interrupt start |
handle_fasteoi_irq | set_affinity(CPU 1)
handler |
... | interrupt start
... | handle_fasteoi_irq -> early out
handle_fasteoi_irq return | interrupt end
interrupt end |
If the interrupt was an edge, too bad. The interrupt is lost, and
the system will eventually die one way or another. Not great.
A way to avoid this situation is to detect this problem at the point
we handle the interrupt on the new target. Instead of dropping the
interrupt, use the resend mechanism to force it to be replayed.
Also, in order to limit the impact of this workaround to the pathetic
architectures that require it, gate it behind a new irq flag aptly
named IRQD_RESEND_WHEN_IN_PROGRESS.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: KarimAllah Raslan <karahmed@amazon.com>
Cc: Yipeng Zou <zouyipeng@huawei.com>
Cc: Zhang Jianhua <chris.zjh@huawei.com>
[maz: reworded commit mesage]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230608120021.3273400-3-jgowans@amazon.com
|
|
As we're about to use the last bit available in the IRQD_* state
flags, rewrite these flags with BIT(), which ensures that these
constant do not represent a signed value.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
'slab/for-6.5/slab-deprecate' into slab/for-next
Merge the feature branches scheduled for 6.5:
- replace the usage of weak PRNGs, by David Keisar Schmidt
- introduce the SLAB_NO_MERGE kmem_cache flag, by Jesper Dangaard Brouer
- deprecate CONFIG_SLAB, with a planned removal, by myself
|
|
check_bugs() has become a dumping ground for all sorts of activities to
finalize the CPU initialization before running the rest of the init code.
Most are empty, a few do actual bug checks, some do alternative patching
and some cobble a CPU advertisement string together....
Aside of that the current implementation requires duplicated function
declaration and mostly empty header files for them.
Provide a new function arch_cpu_finalize_init(). Provide a generic
declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub
inline otherwise.
This requires a temporary #ifdef in start_kernel() which will be removed
along with check_bugs() once the architectures are converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de
|
|
USB4 v2 bumps the per-lane speed up to 40 Gb/s. Also the lanes are
always bonded which gives 80 Gb/s symmetric link (and 120/40 Gb/s
asymmetric). This updates the speed and width of routers and XDomain
connections to support the Gen 4 link. For now we keep the link as is
even if it is already asymmetric.
While there make tb_port_set_link_width() static.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Most of the ioctls to net protocols operates directly on userspace
argument (arg). Usually doing get_user()/put_user() directly in the
ioctl callback. This is not flexible, because it is hard to reuse these
functions without passing userspace buffers.
Change the "struct proto" ioctls to avoid touching userspace memory and
operate on kernel buffers, i.e., all protocol's ioctl callbacks is
adapted to operate on a kernel memory other than on userspace (so, no
more {put,get}_user() and friends being called in the ioctl callback).
This changes the "struct proto" ioctl format in the following way:
int (*ioctl)(struct sock *sk, int cmd,
- unsigned long arg);
+ int *karg);
(Important to say that this patch does not touch the "struct proto_ops"
protocols)
So, the "karg" argument, which is passed to the ioctl callback, is a
pointer allocated to kernel space memory (inside a function wrapper).
This buffer (karg) may contain input argument (copied from userspace in
a prep function) and it might return a value/buffer, which is copied
back to userspace if necessary. There is not one-size-fits-all format
(that is I am using 'may' above), but basically, there are three type of
ioctls:
1) Do not read from userspace, returns a result to userspace
2) Read an input parameter from userspace, and does not return anything
to userspace
3) Read an input from userspace, and return a buffer to userspace.
The default case (1) (where no input parameter is given, and an "int" is
returned to userspace) encompasses more than 90% of the cases, but there
are two other exceptions. Here is a list of exceptions:
* Protocol RAW:
* cmd = SIOCGETVIFCNT:
* input and output = struct sioc_vif_req
* cmd = SIOCGETSGCNT
* input and output = struct sioc_sg_req
* Explanation: for the SIOCGETVIFCNT case, userspace passes the input
argument, which is struct sioc_vif_req. Then the callback populates
the struct, which is copied back to userspace.
* Protocol RAW6:
* cmd = SIOCGETMIFCNT_IN6
* input and output = struct sioc_mif_req6
* cmd = SIOCGETSGCNT_IN6
* input and output = struct sioc_sg_req6
* Protocol PHONET:
* cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE
* input int (4 bytes)
* Nothing is copied back to userspace.
For the exception cases, functions sock_sk_ioctl_inout() will
copy the userspace input, and copy it back to kernel space.
The wrapper that prepare the buffer and put the buffer back to user is
sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now
calls sk_ioctl(), which will handle all cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/mlx5/driver.h
617f5db1a626 ("RDMA/mlx5: Fix affinity assignment")
dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/
tools/testing/selftests/net/mptcp/mptcp_join.sh
47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
45b1a1227a7a ("mptcp: introduces more address related mibs")
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
"This is an unusually large bunch of bug fixes for the later rc cycle,
rxe and mlx5 both dumped a lot of things at once. rxe continues to fix
itself, and mlx5 is fixing a bunch of "queue counters" related bugs.
There is one highly notable bug fix regarding the qkey. This small
security check was missed in the original 2005 implementation and it
allows some significant issues.
Summary:
- Two rtrs bug fixes for error unwind bugs
- Several rxe bug fixes:
* Incorrect Rx packet validation
* Using memory without a refcount
* Syzkaller found use before initialization
* Regression fix for missing locking with the tasklet conversion
from this merge window
- Have bnxt report the correct link properties to userspace, this was
a regression in v6.3
- Several mlx5 bug fixes:
* Kernel crash triggerable by userspace for the RAW ethernet
profile
* Defend against steering refcounting issues created by userspace
* Incorrect change of QP port affinity parameters in some LAG
configurations
- Fix mlx5 Q counters:
* Do not over allocate Q counters to allow userspace to use the
full port capacity
* Kernel crash triggered by eswitch due to mis-use of Q counters
* Incorrect mlx5_device for Q counters in some LAG configurations
- Properly implement the IBA spec restricting privileged qkeys to
root
- Always an error when reading from a disassociated device's event
queue
- isert bug fixes:
* Avoid a deadlock with the CM handler and CM ID destruction
* Correct list corruption due to incorrect locking
* Fix a use after free around connection tear down"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Fix rxe_cq_post
IB/isert: Fix incorrect release of isert connection
IB/isert: Fix possible list corruption in CMA handler
IB/isert: Fix dead lock in ib_isert
RDMA/mlx5: Fix affinity assignment
IB/uverbs: Fix to consider event queue closing also upon non-blocking mode
RDMA/uverbs: Restrict usage of privileged QKEYs
RDMA/cma: Always set static rate to 0 for RoCE
RDMA/mlx5: Fix Q-counters query in LAG mode
RDMA/mlx5: Remove vport Q-counters dependency on normal Q-counters
RDMA/mlx5: Fix Q-counters per vport allocation
RDMA/mlx5: Create an indirect flow table for steering anchor
RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions
RDMA/rxe: Fix the use-before-initialization error of resp_pkts
RDMA/bnxt_re: Fix reporting active_{speed,width} attributes
RDMA/rxe: Fix ref count error in check_rkey()
RDMA/rxe: Fix packet length checks
RDMA/rtrs: Fix rxe_dealloc_pd warning
RDMA/rtrs: Fix the last iu->buf leak in err path
|
|
If fast_switch_possible flag is set by the scaling driver, the governor
is free to select fast_switch function even if adjust_perf is set. Some
scaling drivers which use adjust_perf don't set fast_switch thinking
that the governor would never fall back to fast_switch. But the governor
can fall back to fast_switch even in runtime if frequency invariance is
disabled due to some reason. This could crash the kernel if the driver
didn't set the fast_switch function pointer.
Therefore, fail driver registration if it has adjust_perf without
fast_switch.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* kvm-arm64/ffa-proxy:
: pKVM FF-A Proxy, courtesy Will Deacon and Andrew Walbran
:
: From the cover letter:
:
: pKVM's primary goal is to protect guest pages from a compromised host by
: enforcing access control restrictions using stage-2 page-tables. Sadly,
: this cannot prevent TrustZone from accessing non-secure memory, and a
: compromised host could, for example, perform a 'confused deputy' attack
: by asking TrustZone to use pages that have been donated to protected
: guests. This would effectively allow the host to have TrustZone
: exfiltrate guest secrets on its behalf, hence breaking the isolation
: that pKVM intends to provide.
:
: This series addresses this problem by providing pKVM with the ability to
: monitor SMCs following the Arm FF-A protocol. FF-A provides (among other
: things) a set of memory management APIs allowing the Normal World to
: share, donate or lend pages with Secure. By monitoring these SMCs, pKVM
: can ensure that the pages that are shared, lent or donated to Secure by
: the host kernel are only pages that it owns.
KVM: arm64: pkvm: Add support for fragmented FF-A descriptors
KVM: arm64: Handle FFA_FEATURES call from the host
KVM: arm64: Handle FFA_MEM_LEND calls from the host
KVM: arm64: Handle FFA_MEM_RECLAIM calls from the host
KVM: arm64: Handle FFA_MEM_SHARE calls from the host
KVM: arm64: Add FF-A helpers to share/unshare memory with secure world
KVM: arm64: Handle FFA_RXTX_MAP and FFA_RXTX_UNMAP calls from the host
KVM: arm64: Allocate pages for hypervisor FF-A mailboxes
KVM: arm64: Probe FF-A version and host/hyp partition ID during init
KVM: arm64: Block unsafe FF-A calls from the host
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/eager-page-splitting:
: Eager Page Splitting, courtesy of Ricardo Koller.
:
: Dirty logging performance is dominated by the cost of splitting
: hugepages to PTE granularity. On systems that mere mortals can get their
: hands on, each fault incurs the cost of a full break-before-make
: pattern, wherein the broadcast invalidation and ensuing serialization
: significantly increases fault latency.
:
: The goal of eager page splitting is to move the cost of hugepage
: splitting out of the stage-2 fault path and instead into the ioctls
: responsible for managing the dirty log:
:
: - If manual protection is enabled for the VM, hugepage splitting
: happens in the KVM_CLEAR_DIRTY_LOG ioctl. This is desirable as it
: provides userspace granular control over hugepage splitting.
:
: - Otherwise, if userspace relies on the legacy dirty log behavior
: (clear on collection), hugepage splitting is done at the moment dirty
: logging is enabled for a particular memslot.
:
: Support for eager page splitting requires explicit opt-in from
: userspace, which is realized through the
: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE capability.
arm64: kvm: avoid overflow in integer division
KVM: arm64: Use local TLBI on permission relaxation
KVM: arm64: Split huge pages during KVM_CLEAR_DIRTY_LOG
KVM: arm64: Open-code kvm_mmu_write_protect_pt_masked()
KVM: arm64: Split huge pages when dirty logging is enabled
KVM: arm64: Add kvm_uninit_stage2_mmu()
KVM: arm64: Refactor kvm_arch_commit_memory_region()
KVM: arm64: Add kvm_pgtable_stage2_split()
KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
KVM: arm64: Export kvm_are_all_memslots_empty()
KVM: arm64: Add helper for creating unlinked stage2 subtrees
KVM: arm64: Add KVM_PGTABLE_WALK flags for skipping CMOs and BBM TLBIs
KVM: arm64: Rename free_removed to free_unlinked
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Create a uapi header include/uapi/linux/eventfd.h, move the associated
flags to the uapi header, and include it from linux/eventfd.h.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <tencent_2B6A999A23E86E522D5D9859D54FFCF9AA05@qq.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into char-misc-next
Immutable branch containing TPS6594 core (MFD) support due for the v6.5 merge window
We want this due to patches requiring this mfd support.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'ib-mfd-tps6594-core-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: tps6594: Add driver for TI TPS6594 PMIC
|
|
Some users want to use the struct device pointer to see if the
device is compatible in terms of Open Firmware specifications,
i.e. if it has a 'compatible' property and it matches to the
given value. Provide inline helper for the users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Message-ID: <20230609154900.43024-3-andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The data type of struct acpi_device_id is defined in the
mod_devicetable.h. It's suboptimal to require user with
the almost agnostic code to include acpi.h solely for the
macro that affects the data type defined elsewhere.
Taking into account the above and for the sake of consistency
move ACPI_DEVICE_CLASS() to mod_devicetable.h.
Note, that with CONFIG_ACPI=n the ID table will be filed with data
but it does not really matter because either it won't be used, or
won't be compiled in some cases (when guarded by respective ifdeffery).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Message-ID: <20230609154900.43024-2-andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.5 cycle
Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.
Changes
* 104-quad-8
- Remove reference in Kconfig to 25-bit counter value
- Utilize bitfield access macros
- Refactor to buffer states for CMR, IOR, and IDR
- Utilize helper functions to handle PR, FLAG and PSC
- Migrate to the regmap API
* i8254
- Introduce the Intel 8254 interface library module
* stm32-timer-cnt
- Reset TIM_TISEL to its default value in probe
* tools/counter
- Add .gitignore
- Remove lingering 'include' directories on make clean
* tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: i8254: Introduce the Intel 8254 interface library module
counter: 104-quad-8: Migrate to the regmap API
counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
counter: 104-quad-8: Utilize bitfield access macros
tools/counter: Makefile: Remove lingering 'include' directories on make clean
tools/counter: Add .gitignore
counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe
counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
|
