summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2023-06-15Merge tag 'iio-for-6.5a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for the 6.5 cycle. New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. * tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits) dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/ dt-bindings: iio: adc: Add rockchip,rk3588-saradc string iio: adc: rockchip_saradc: Use dev_err_probe iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Add callback functions iio: temperature: tmp006: Add OF device matching support dt-bindings: iio: temperature: Add support for tmp006 staging: iio: Switch i2c drivers back to use .probe() iio: amplifiers: ad8366 Fix whitespace issue iio: imu: inv_icm42600: avoid frequent timestamp jitter MAINTAINERS: Add ROHM BU27008 iio: light: ROHM BU27008 color sensor iio: kx022a: Use new iio_validate_own_trigger() iio: trigger: Add simple trigger_validation helper dt-bindings: iio: light: ROHM BU27008 iio: mlx90614: Add MLX90615 support ...
2023-06-15Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial ↵Greg Kroah-Hartman
detection" This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15. Heikki reports that this should not be a global flag just to work around one broken driver and should be fixed differently, so revert it. Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection") Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com Cc: Prashanth K <quic_prashk@quicinc.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15fbdev: Use /* */ comment in initializer macroThomas Zimmermann
Use /* */ in initializer macro to avoid out-commenting the comma at the end of the line. Reported-by: Christian König <ckoenig.leichtzumerken@gmail.com> Closes: https://lore.kernel.org/dri-devel/20230530150253.22758-1-tzimmermann@suse.de/T/#m356cda2679c17d7a01f30ce2b5282cd9046ea6d4 Fixes: f1061fa641b8 ("fbdev: Add initializer macros for struct fb_ops") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230614131253.10208-1-tzimmermann@suse.de
2023-06-15mfd: stpmic1: Fixup main control register and bits namingSean Nyekjaer
Fixup main control register and bits naming so the match the naming from the datasheet. https://www.st.com/resource/en/datasheet/stpmic1.pdf Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230602062426.3947116-1-sean@geanix.com
2023-06-15mfd: axp20x: Add support for AXP192Aidan MacDonald
The AXP192 PMIC is similar to the AXP202/AXP209, but with different regulators, additional GPIOs, and a different IRQ register layout. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20230511092609.76183-1-aidanmacdonald.0x0@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15mfd: intel-m10-bmc: Manage access to MAX 10 fw handshake registersIlpo Järvinen
On some MAX 10 cards, the BMC firmware is not available to service handshake registers during secure update erase and write phases at normal speeds. This problem affects at least hwmon driver. When the MAX 10 hwmon driver tries to read the sensor values during a secure update, the reads are slowed down (e.g., reading all D5005 sensors takes ~24s which is magnitudes worse than the normal <0.02s). Manage access to the handshake registers using a rw semaphore and a FW state variable to prevent accesses during those secure update phases and return -EBUSY instead. If handshake_sys_reg_nranges == 0, don't update bwcfw_state as it is not used. This avoids the locking cost. Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Co-developed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-5-ilpo.jarvinen@linux.intel.com
2023-06-15mfd: intel-m10-bmc: Move m10bmc_sys_read() away from headerIlpo Järvinen
Move m10bmc_sys_read() out from the header to prepare it for adding more code into the function which would make it too large to be a static inline any more. While at it, replace the vague wording in function comment with more precise statements. Reviewed-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> # For hwmon Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-4-ilpo.jarvinen@linux.intel.com
2023-06-15mfd: intel-m10-bmc: Create m10bmc_sys_update_bits()Ilpo Järvinen
Wrap regmap_update_bits() with m10bmc_sys_update_bits() in order to be able to add additional checks into it. Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230417092653.16487-3-ilpo.jarvinen@linux.intel.com
2023-06-15Merge branches 'tb-mfd-clk-input-pinctrl-power-rtc-sound-6.5', ↵Lee Jones
'ib-mfd-tps6594-core-6.5', 'ib-mfd-regulator-max5970-6.5', 'ib-mfd-regulator-6.5' and 'ib-mfd-power-6.5' into ibs-for-mfd-merged
2023-06-15Coresight: Add coresight dummy driverHao Zhang
Some Coresight devices that kernel don't have permission to access or configure. For these devices, a dummy driver is needed to register them as Coresight devices. The module may also be used to define components that may not have any programming interfaces, so that paths can be created in the driver. It provides Coresight API for operations on dummy devices, such as enabling and disabling them. It also provides the Coresight dummy sink/source paths for debugging. Signed-off-by: Hao Zhang <quic_hazha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230602084149.40031-2-quic_hazha@quicinc.com
2023-06-15net: create device lookup API with reference trackingJakub Kicinski
New users of dev_get_by_index() and dev_get_by_name() keep getting added and it would be nice to steer them towards the APIs with reference tracking. Add variants of those calls which allocate the reference tracker and use them in a couple of places. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15Merge tag 'amd-drm-next-6.5-2023-06-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.5-2023-06-02: amdgpu: - SR-IOV fixes - Warning fixes - Misc code cleanups and spelling fixes - DCN 3.2 updates - Improved DC FAMS support for better power management - Improved DC SubVP support for better power management - DCN 3.1.x fixes - Max IB size query - DC GPU reset fixes - RAS updates - DCN 3.0.x fixes - S/G display fixes - CP shadow buffer support - Implement connector force callback - Z8 power improvements - PSP 13.0.10 vbflash support - Mode2 reset fixes - Store MQDs in VRAM to improve queue switch latency - VCN 3.x fixes - JPEG 3.x fixes - Enable DC_FP on LoongArch - GFXOFF fixes - GC 9.4.3 partition support - SDMA 4.4.2 partition support - VCN/JPEG 4.0.3 partition support - VCN 4.0.3 updates - NBIO 7.9 updates - GC 9.4.3 updates - Take NUMA into account when allocating memory - Handle NUMA for partitions - SMU 13.0.6 updates - GC 9.4.3 RAS updates - Stop including unused swiotlb.h - SMU 13.0.7 fixes - Fix clock output ordering on some APUs - Clean up DC FPGA code - GFX9 preemption fixes - Misc irq fixes - S0ix fixes - Add new DRM_AMDGPU_WERROR config parameter to help with CI - PCIe fix for RDNA2 - kdoc fixes - Documentation updates amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions radeon: - Fix possible double free - Stop including unused swiotlb.h - Fix possible division by zero ttm: - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() UAPI: - Add new ctx query flag to better handle GPU resets Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 - Add new interface to query and set shadow buffer for RDNA3 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986 - Add new INFO query for max IB size Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3 amd-drm-next-6.5-2023-06-09: amdgpu: - S0ix fixes - Initial SMU13 Overdrive support - kdoc fixes - Misc clode cleanups - Flexible array fixes - Display OTG fixes - SMU 13.0.6 updates - Revert some broken clock counter updates - Misc display fixes - GFX9 preemption fixes - Add support for newer EEPROM bad page table format - Add missing radeon secondary id - Add support for new colorspace KMS API - CSA fix - Stable pstate fixes for APUs - make vbl interface admin only - Handle PCI accelerator class amdkfd: - Add debugger support for gdb radeon: - Fix possible UAF drm: - Add Colorspace functionality UAPI: - Add debugger interface for enabling gdb Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi - Add KMS colorspace API Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
2023-06-14blktrace: use inline function for blk_trace_remove() while blktrace is disabledYu Kuai
If config is disabled, call blk_trace_remove() directly will trigger build warning, hence use inline function instead, prepare to fix blktrace debugfs entries leakage. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230610022003.2557284-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-14fsverity: rework fsverity_get_digest() againEric Biggers
Address several issues with the calling convention and documentation of fsverity_get_digest(): - Make it provide the hash algorithm as either a FS_VERITY_HASH_ALG_* value or HASH_ALGO_* value, at the caller's choice, rather than only a HASH_ALGO_* value as it did before. This allows callers to work with the fsverity native algorithm numbers if they want to. HASH_ALGO_* is what IMA uses, but other users (e.g. overlayfs) should use FS_VERITY_HASH_ALG_* to match fsverity-utils and the fsverity UAPI. - Make it return the digest size so that it doesn't need to be looked up separately. Use the return value for this, since 0 works nicely for the "file doesn't have fsverity enabled" case. This also makes it clear that no other errors are possible. - Rename the 'digest' parameter to 'raw_digest' and clearly document that it is only useful in combination with the algorithm ID. This hopefully clears up a point of confusion. - Export it to modules, since overlayfs will need it for checking the fsverity digests of lowerdata files (https://lore.kernel.org/r/dd294a44e8f401e6b5140029d8355f88748cd8fd.1686565330.git.alexl@redhat.com). Acked-by: Mimi Zohar <zohar@linux.ibm.com> # for the IMA piece Link: https://lore.kernel.org/r/20230612190047.59755-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-06-14regulator: mt6358: Drop *_SSHUB regulatorsChen-Yu Tsai
The *_SSHUB regulators are actually alternate configuration interfaces for their non *_SSHUB counterparts. They are not separate regulator outputs. These registers are intended for the companion processor to use to configure the power rails while the main processor is sleeping. They are not intended for the main operating system to use. Since they are not real outputs they shouldn't be modeled separately. Remove them. Luckily no device tree actually uses them. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20230609083009.2822259-5-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-14regulator: mt6358: Merge VCN33_* regulatorsChen-Yu Tsai
The VCN33_BT and VCN33_WIFI regulators are actually the same regulator, having the same voltage setting and output pin. There are simply two enable bits that are ORed together to enable the regulator. Having two regulators representing the same output pin is misleading from a design matching standpoint, and also error-prone in driver implementations. If consumers try to set different voltages on either regulator, the one set later would override the one set before. There are ways around this, such as chaining them together and having the downstream one act as a switch. But given there's only one output pin, such a workaround doesn't match reality. Remove the VCN33_WIFI regulator. During the probe phase, have the driver sync the enable status of VCN33_WIFI to VCN33_BT. Also drop the suffix so that the regulator name matches the pin name in the datasheet. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20230609083009.2822259-4-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-14wifi: iwlwifi: mvm: add support for Extra EHT LTFGregory Greenman
Add support for Extra EHT LTF defined in 9.4.2.313 EHT Capabilities element. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230613155501.de019d7cc174.I806f0f6042b89274192701a60b4f7900822db666@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-13bpf: Verify scalar ids mapping in regsafe() using check_ids()Eduard Zingerman
Make sure that the following unsafe example is rejected by verifier: 1: r9 = ... some pointer with range X ... 2: r6 = ... unbound scalar ID=a ... 3: r7 = ... unbound scalar ID=b ... 4: if (r6 > r7) goto +1 5: r6 = r7 6: if (r6 > X) goto ... --- checkpoint --- 7: r9 += r7 8: *(u64 *)r9 = Y This example is unsafe because not all execution paths verify r7 range. Because of the jump at (4) the verifier would arrive at (6) in two states: I. r6{.id=b}, r7{.id=b} via path 1-6; II. r6{.id=a}, r7{.id=b} via path 1-4, 6. Currently regsafe() does not call check_ids() for scalar registers, thus from POV of regsafe() states (I) and (II) are identical. If the path 1-6 is taken by verifier first, and checkpoint is created at (6) the path [1-4, 6] would be considered safe. Changes in this commit: - check_ids() is modified to disallow mapping multiple old_id to the same cur_id. - check_scalar_ids() is added, unlike check_ids() it treats ID zero as a unique scalar ID. - check_scalar_ids() needs to generate temporary unique IDs, field 'tmp_id_gen' is added to bpf_verifier_env::idmap_scratch to facilitate this. - regsafe() is updated to: - use check_scalar_ids() for precise scalar registers. - compare scalar registers using memcmp only for explore_alu_limits branch. This simplifies control flow for scalar case, and has no measurable performance impact. - check_alu_op() is updated to avoid generating bpf_reg_state::id for constant scalar values when processing BPF_MOV. ID is needed to propagate range information for identical values, but there is nothing to propagate for constants. Fixes: 75748837b7e5 ("bpf: Propagate scalar ranges through register assignments.") Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230613153824.3324830-4-eddyz87@gmail.com
2023-06-13bpf: Use scalar ids in mark_chain_precision()Eduard Zingerman
Change mark_chain_precision() to track precision in situations like below: r2 = unknown value ... --- state #0 --- ... r1 = r2 // r1 and r2 now share the same ID ... --- state #1 {r1.id = A, r2.id = A} --- ... if (r2 > 10) goto exit; // find_equal_scalars() assigns range to r1 ... --- state #2 {r1.id = A, r2.id = A} --- r3 = r10 r3 += r1 // need to mark both r1 and r2 At the beginning of the processing of each state, ensure that if a register with a scalar ID is marked as precise, all registers sharing this ID are also marked as precise. This property would be used by a follow-up change in regsafe(). Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230613153824.3324830-2-eddyz87@gmail.com
2023-06-13soc: qcom: socinfo: Add support for new fields in revision 19Naman Jain
Add support for below fields coming in socinfo structure under v19: * num_func_clusters: number of clusters with at least one functional core * boot_cluster: cluster selected as boot cluster * boot_core: core selected as boot core While at it, rename some variables to align them with their functionalities. Signed-off-by: Naman Jain <quic_namajain@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230606134626.18790-3-quic_namajain@quicinc.com
2023-06-13soc: qcom: socinfo: Add support for new fields in revision 18Naman Jain
Add support for below fields coming in socinfo structure under v18: * num_kvps: number of key value pairs (KVP) * kvps_offset: the offset of the KVP table from the base address of socinfo structure in SMEM KVP table has boolean values for certain feature flags, used to determine hardware configuration. Signed-off-by: Naman Jain <quic_namajain@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230606134626.18790-2-quic_namajain@quicinc.com
2023-06-13gpiolib: remove unused gpio_cansleep()Andy Shevchenko
There is not a single user in the entire kernel of this deprecated API, kill it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-06-13usb: common: usb-conn-gpio: Set last role to unknown before initial detectionPrashanth K
Currently if we bootup a device without cable connected, then usb-conn-gpio won't call set_role() since last_role is same as current role. This happens because during probe last_role gets initialised to zero. To avoid this, added a new constant in enum usb_role, last_role is set to USB_ROLE_UNKNOWN before performing initial detection. While at it, also handle default case for the usb_role switch in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid build warnings. Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-12sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpageDavid Howells
When transmitting data, call down into TCP using sendmsg with MSG_SPLICE_PAGES to indicate that content should be spliced rather than performing sendpage calls to transmit header, data pages and trailer. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Anna Schumaker <anna@kernel.org> cc: Jeff Layton <jlayton@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12Remove file->f_op->sendpageDavid Howells
Remove file->f_op->sendpage as splicing to a socket now calls sendmsg rather than sendpage. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resumeMario Limonciello
All uses in the kernel are currently already oriented around suspend/resume. As some other parts of the kernel may also use these messages in functions that could also be used outside of suspend/resume, only enable in suspend/resume path. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12nvmet: reorder fields in 'struct nvmefc_fcp_req'Christophe JAILLET
Group some variables based on their sizes to reduce holes. On x86_64, this shrinks the size of 'struct nvmefc_fcp_req' from 112 to 104 bytes. This structure is embedded in some other structures (nvme_fc_fcp_op which itself is embedded in nvme_fcp_op_w_sgl), so it helps reducing the size of these structures too. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12PCI: Unexport pci_save_aer_state()Bjorn Helgaas
pci_save_aer_state() and pci_restore_aer_state() are only used in drivers/pci, so don't expose them to the rest of the kernel. No functional change intended. Link: https://lore.kernel.org/r/20230609222500.1267795-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-06-12lib/string_choices: Add str_high_low() helperAndy Shevchenko
Add str_high_low() helper to return 'high' or 'low' string literal. Also add an inversed variant, i.e. str_low_high(). All the same for str_hi_low(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-06-12lib/string_helpers: Split out string_choices.hAndy Shevchenko
Some users may only need the string choice APIs. Split the respective header, i.e. string_choices.h. Include it in the string_helpers.h for backward compatibility. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-06-12cgroup: remove unused task_cgroup_path()Miaohe Lin
task_cgroup_path() is not used anymore. So remove it. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2023-06-12svcrdma: Revert 2a1e4f21d841 ("svcrdma: Normalize Send page handling")Chuck Lever
Get rid of the completion wait in svc_rdma_sendto(), and release pages in the send completion handler again. A subsequent patch will handle releasing those pages more efficiently. Reverted by hand: patch -R would not apply cleanly. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-12SUNRPC: Revert 579900670ac7 ("svcrdma: Remove unused sc_pages field")Chuck Lever
Pre-requisite for releasing pages in the send completion handler. Reverted by hand: patch -R would not apply cleanly. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-12svcrdma: Clean up allocation of svc_rdma_recv_ctxtChuck Lever
The physical device's favored NUMA node ID is available when allocating a recv_ctxt. Use that value instead of relying on the assumption that the memory allocation happens to be running on a node close to the device. This clean up eliminates the hack of destroying recv_ctxts that were not created by the receive CQ thread -- recv_ctxts are now always allocated on a "good" node. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-12blk-mq: fix potential io hang by wrong 'wake_batch'Yu Kuai
In __blk_mq_tag_busy/idle(), updating 'active_queues' and calculating 'wake_batch' is not atomic: t1: t2: _blk_mq_tag_busy blk_mq_tag_busy inc active_queues // assume 1->2 inc active_queues // 2 -> 3 blk_mq_update_wake_batch // calculate based on 3 blk_mq_update_wake_batch /* calculate based on 2, while active_queues is actually 3. */ Fix this problem by protecting them wih 'tags->lock', this is not a hot path, so performance should not be concerned. And now that all writers are inside the lock, switch 'actives_queues' from atomic to unsigned int. Fixes: 180dccb0dba4 ("blk-mq: fix tag_get wait task can't be awakened") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230610023043.2559121-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12fs: remove the now unused FMODE_* flagsChristoph Hellwig
FMODE_NDELAY, FMODE_EXCL and FMODE_WRITE_IOCTL were only used for block internal purposed and are now entirely unused, so remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-31-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: replace fmode_t with a block-specific type for block open flagsChristoph Hellwig
The only overlap between the block open flags mapped into the fmode_t and other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and ->ioctl and stop abusing fmode_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: move a few internal definitions out of blkdev.hChristoph Hellwig
All these helpers are only used in core block code, so move them out of the public header. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-26-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12mtd: block: use a simple bool to track open for writeChristoph Hellwig
Instead of propagating the fmode_t, just use a bool to track if a mtd block device was opened for writing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/r/20230608110258.189493-23-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12scsi: replace the fmode_t argument to ->sg_io_fn with a simple boolChristoph Hellwig
Instead of passing a fmode_t and only checking it for FMODE_WRITE, pass a bool open_for_write to prepare for callers that won't have the fmode_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-21-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12fs: remove sb->s_modeChristoph Hellwig
There is no real need to store the open mode in the super_block now. It is only used by f2fs, which can easily recalculate it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: add a sb_open_mode helperChristoph Hellwig
Add a helper to return the open flags for blkdev_get_by* for passed in super block flags instead of open coding the logic in many places. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: use the holder as indication for exclusive opensChristoph Hellwig
The current interface for exclusive opens is rather confusing as it requires both the FMODE_EXCL flag and a holder. Remove the need to pass FMODE_EXCL and just key off the exclusive open off a non-NULL holder. For blkdev_put this requires adding the holder argument, which provides better debug checking that only the holder actually releases the hold, but at the same time allows removing the now superfluous mode argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: remove the unused mode argument to ->releaseChristoph Hellwig
The mode argument to the ->release block_device_operation is never used, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: pass a gendisk to ->openChristoph Hellwig
->open is only called on the whole device. Make that explicit by passing a gendisk instead of the block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: pass a gendisk on bdev_check_media_changeChristoph Hellwig
bdev_check_media_change should only ever be called for the whole device. Pass a gendisk to make that explicit and rename the function to disk_check_media_change. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12cdrom: remove the unused mode argument to cdrom_releaseChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12cdrom: track if a cdrom_device_info was opened for dataChristoph Hellwig
Set a flag when a cdrom_device_info is opened for writing, instead of trying to figure out this at release time. This will allow to eventually remove the mode argument to the ->release block_device_operation as nothing but the CDROM drivers uses that argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20230608110258.189493-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12cdrom: remove the unused cdrom_close_write release codeChristoph Hellwig
cdrom_close_write is empty, and the for_data flag it is keyed off is never set. Remove all this clutter. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12cdrom: remove the unused mode argument to cdrom_ioctlChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-15 10:16:34 +0000