| Age | Commit message (Collapse) | Author |
|---|
|
Add dev_pm_opp_get_required_pstate() which allows OPP users to retrieve
required performance state of a given OPP.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add a ceil version of the dev_pm_opp_find_level(). It's handy to have if
levels don't start from 0 in OPP table and zero usually means a minimal
level.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct i3c_driver::remove() return
void, too. This makes it obvious that returning an error code is
a bad idea and future driver authors cannot get that wrong.
Up to now there are no drivers with a remove callback, so there is no
need to adapt drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210128091048.17006-2-u.kleine-koenig@pengutronix.de
|
|
Move out header file from include/linux/platform_data/x86/ to
include/linux/platform_data/, since it does not depend on x86
architecture.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Update license to SPDX-License.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Define a vfio_iommu_driver_ops notify callback, for sending events to
the driver. Drivers are not required to provide the callback, and
may ignore any events. The handling of events is driver specific.
Define the CONTAINER_CLOSE event, called when the container's file
descriptor is closed. This event signifies that no further state changes
will occur via container ioctl's.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Add nfs_pageio_complete_read() and call this from both nfs_readpage()
and nfs_readpages(), since the submission and accounting is the same
for both functions.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Both nfs_readpage() and nfs_readpages() use similar code.
This patch should be no functional change, and refactors
nfs_readpage_async() to use nfs_readdesc to enable future
merging of nfs_readpage_async() and nfs_readpage_async_filler().
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-5.12/io_uring
Merge RESOLVE_CACHED bits from Al, as the io_uring changes will build on
top of that.
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED
fs: add support for LOOKUP_CACHED
saner calling conventions for unlazy_child()
fs: make unlazy_walk() error handling consistent
fs/namei.c: Remove unlikely of status being -ECHILD in lookup_fast()
do_tmpfile(): don't mess with finish_open()
|
|
Current PERF_SAMPLE_WEIGHT sample type is very useful to expresses the
cost of an action represented by the sample. This allows the profiler
to scale the samples to be more informative to the programmer. It could
also help to locate a hotspot, e.g., when profiling by memory latencies,
the expensive load appear higher up in the histograms. But current
PERF_SAMPLE_WEIGHT sample type is solely determined by one factor. This
could be a problem, if users want two or more factors to contribute to
the weight. For example, Golden Cove core PMU can provide both the
instruction latency and the cache Latency information as factors for the
memory profiling.
For current X86 platforms, although meminfo::latency is defined as a
u64, only the lower 32 bits include the valid data in practice (No
memory access could last than 4G cycles). The higher 32 bits can be used
to store new factors.
Add a new sample type, PERF_SAMPLE_WEIGHT_STRUCT, to indicate the new
sample weight structure. It shares the same space as the
PERF_SAMPLE_WEIGHT sample type.
Users can apply either the PERF_SAMPLE_WEIGHT sample type or the
PERF_SAMPLE_WEIGHT_STRUCT sample type to retrieve the sample weight, but
they cannot apply both sample types simultaneously.
Currently, only X86 and PowerPC use the PERF_SAMPLE_WEIGHT sample type.
- For PowerPC, there is nothing changed for the PERF_SAMPLE_WEIGHT
sample type. There is no effect for the new PERF_SAMPLE_WEIGHT_STRUCT
sample type. PowerPC can re-struct the weight field similarly later.
- For X86, the same value will be dumped for the PERF_SAMPLE_WEIGHT
sample type or the PERF_SAMPLE_WEIGHT_STRUCT sample type for now.
The following patches will apply the new factors for the
PERF_SAMPLE_WEIGHT_STRUCT sample type.
The field in the union perf_sample_weight should be shared among
different architectures. A generic name is required, but it's hard to
abstract a name that applies to all architectures. For example, on X86,
the fields are to store all kinds of latency. While on PowerPC, it
stores MMCRA[TECX/TECM], which should not be latency. So a general name
prefix 'var$NUM' is used here.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1611873611-156687-2-git-send-email-kan.liang@linux.intel.com
|
|
The partner's PD revision may be resolved later than the port partner
registration since the port partner creation may take place once
Type-C detects the port has changed state, but before PD communication is
completed.
Add a setter so that the partner's PD revision can be attached to it once
it becomes available.
If the revision is set to a valid version (not 0), the setter will also
refresh the partner's usb_pd flag and notify on "supports_usb_power_delivery"
sysfs property as well.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20210129061406.2680146-4-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB Power Delivery specification Section 6.2.1.1.5 outlines
revision backward compatibility requirements starting from Revision 3.0.
The Port, the Cable Plug, and the Port Partner may support either
revision 2 or revision 3 independently, and communication between ports,
partners, and cables of different revisions are allowed under rules
that the parties agree to communicate between each other using the
lowest common operating revision.
This may mean that Port-to-Partner operating revision comms may be
different than Port-to-CablePlug operating revision comms. For example,
it is possible for a R3.0 port to communicate with a R3.0 partner
using R3.0 messages, while the R3.0 port (in the same session) must
communicate with the R2.0 cable using R2.0 messages only.
Introduce individual revision number properties for cable
and port partner so that the port can track them independently.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20210129061406.2680146-3-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge in Mediatek support from Yong Wu which introduces significant
changes to the TLB invalidation and Arm short-descriptor code in the
io-pgtable layer.
* for-joerg/mtk: (40 commits)
MAINTAINERS: Add entry for MediaTek IOMMU
iommu/mediatek: Add mt8192 support
iommu/mediatek: Remove unnecessary check in attach_device
iommu/mediatek: Support master use iova over 32bit
iommu/mediatek: Add iova reserved function
iommu/mediatek: Support for multi domains
iommu/mediatek: Add get_domain_id from dev->dma_range_map
iommu/mediatek: Add iova_region structure
iommu/mediatek: Move geometry.aperture updating into domain_finalise
iommu/mediatek: Move domain_finalise into attach_device
iommu/mediatek: Adjust the structure
iommu/mediatek: Support report iova 34bit translation fault in ISR
iommu/mediatek: Support up to 34bit iova in tlb flush
iommu/mediatek: Add power-domain operation
iommu/mediatek: Add pm runtime callback
iommu/mediatek: Add device link for smi-common and m4u
iommu/mediatek: Add error handle for mtk_iommu_probe
iommu/mediatek: Move hw_init into attach_device
iommu/mediatek: Update oas for v7s
iommu/mediatek: Add a flag for iova 34bits case
...
|
|
MediaTek extend the bit5 in lvl1 and lvl2 descriptor as PA34.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-11-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation for adding CQHCI crypto engine (inline encryption)
support, add the code required to make mmc_core and mmc_block aware of
inline encryption. Specifically:
- Add a capability flag MMC_CAP2_CRYPTO to struct mmc_host. Drivers
will set this if the host and driver support inline encryption.
- Embed a blk_keyslot_manager in struct mmc_host. Drivers will
initialize this (as a device-managed resource) if the host and driver
support inline encryption. mmc_block registers this keyslot manager
with the request_queue of any MMC card attached to the host.
- Make mmc_block copy the crypto keyslot and crypto data unit number
from struct request to struct mmc_request, so that drivers will have
access to them.
- If the MMC host is reset, reprogram all the keyslots to ensure that
the software state stays in sync with the hardware state.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Reviewed-and-tested-by: Peng Zhou <peng.zhou@mediatek.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-2-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add a resource-managed variant of blk_ksm_init() so that drivers don't
have to worry about calling blk_ksm_destroy().
Note that the implementation uses a custom devres action to call
blk_ksm_destroy() rather than switching the two allocations to be
directly devres-managed, e.g. with devm_kmalloc(). This is because we
need to keep zeroing the memory containing the keyslots when it is
freed, and also because we want to continue using kvmalloc() (and there
is no devm_kvmalloc()).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20210121082155.111333-2-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Drivers for MMC hosts that accept phase corrections can take advantage
of the helper by embedding an instance of struct mmc_clk_phase_map in
their private data and invoking mmc_of_parse_clk_phase() to extract
phase parameters. It is the responsibility of the host driver to
translate and apply the extracted values to hardware as required.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210114031433.2388532-2-andrew@aj.id.au
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
I have not found any user for this struct component.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/b6f2168b863e4273c6bca5a22fbd4a3a8ddf68d6.1608714110.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Linux 5.11-rc6
* tag 'v5.11-rc6': (1466 commits)
Linux 5.11-rc6
leds: rt8515: Add Richtek RT8515 LED driver
dt-bindings: leds: Add DT binding for Richtek RT8515
leds: trigger: fix potential deadlock with libata
leds: leds-ariel: convert comma to semicolon
leds: leds-lm3533: convert comma to semicolon
dt-bindings: Cleanup standard unit properties
soc: litex: Properly depend on HAS_IOMEM
tty: avoid using vfs_iocb_iter_write() for redirected console writes
null_blk: cleanup zoned mode initialization
cifs: fix dfs domain referrals
drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
drm/nouveau/kms/nv50-: Report max cursor size to userspace
drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
drm/nouveau/dispnv50: Restore pushing of all data.
io_uring: reinforce cancel on flush during exit
cifs: returning mount parm processing errors correctly
rxrpc: Fix memory leak in rxrpc_lookup_local
mlxsw: spectrum_span: Do not overwrite policer configuration
...
|
|
Optimize struct psil_endpoint_config for size by
- reordering fields
- grouping bitfields
- change mapped_channel_id type to s16 (32K channel is enough)
- default_flow_id type to s16 as it's assigned to -1
before:
text data bss dec hex filename
12654100 5211472 666904 18532476 11ac87c vmlinux
after:
12654100 5208528 666904 18529532 11abcfc vmlinux
diff: 2944 bytes
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20210129193117.28833-1-grygorii.strashko@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for objtool to generate proper unwind info for newer
toolchains which do not generate section symbols anymore. And a
cleanup ontop.
This was originally going to go during the next merge window but
people can already trigger a build error with binutils-2.36 which
doesn't emit section symbols - something which objtool relies on - so
let's expedite it"
* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
x86/entry: Emit a symbol for register restoring thunk
|
|
Pull NFS client fixes from Trond Myklebust:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Handle 0 length opaque XDR object data properly
SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
pNFS/NFSv4: Improve rejection of out-of-order layouts
pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
|
|
At PMIC subsystem, C89 comments are preferred over C99.
While here, also update the copyrights of the header file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5a86478c8ccb93d3105485b5f16e20e9c12e2196.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the IRQ list from the header, as this is used only
inside the driver itself. Also, get rid of two unused
defines.
The net result is that only struct hi6421_spmi_pmic remains
on it, as this is used by the regulator driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/138c3a11e4de0ebabdf27932957852136c2f7510.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- When referring to regmap, rename map to regmap
- inside hi6421-spmi-pmic, call private data struct as
ddata.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d23592b11ac606e3b9a3ff95a754cb75921e60aa.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of doing its own SPMI I/O implementation, use the
already-existing regmap one.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/7084885f3007ca5daf0d5bc85d038e26ee82dc0d.1611949675.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rx_callback is a standard mailbox callback mechanism and could
cover the function of proprietary cmdq_task_cb, so it is better
to use the standard one instead of the proprietary one. But
register rx_callback should before mbox_request_channel(),
so remove cmdq_pkt_flush() and let client driver implement
its own synchronous flush.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20201202235856.7652-1-chunkuang.hu@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add the needed board data to support mt8167 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209133238.384030-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
When exporting NFS, we may as well use the real change attribute
returned by the original server instead of faking up a change attribute
from the ctime.
Note we can't do that by setting I_VERSION--that would also turn on the
logic in iversion.h which treats the lower bit specially, and that
doesn't make sense for NFS.
So instead we define a new export operation for filesystems like NFS
that want to manage the change attribute themselves.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/clk/imx/clk-imx6sl.c:156:6: warning: no previous prototype for ‘imx6sl_set_wait_clk’ [-Wmissing-prototypes]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
arm/drivers
Reset controller updates for v5.12
This tag adds support for Broadcom BCM4908 PCIe resets, corrects
the Hisilicon vendor prefix, adds a missing API function
devm_reset_control_get_optional_exclusive_released(), and fixes
the kernel-doc markup for the __device_reset() function.
* tag 'reset-for-v5.12' of git://git.pengutronix.de/pza/linux:
reset: Add devm_reset_control_get_optional_exclusive_released()
reset: core: fix a kernel-doc markup
dt-bindings: reset: convert Hisilicon reset controller bindings to json-schema
dt-bindings: reset: correct vendor prefix hisi to hisilicon
reset: hisilicon: correct vendor prefix
reset: simple: add BCM4908 MISC PCIe reset controller support
dt-bindings: reset: document Broadcom's BCM4908 PCIe reset binding
Link: https://lore.kernel.org/r/20210129153108.GA26994@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The sja1105 implementation can be blind about this, but the felix driver
doesn't do exactly what it's being told, so it needs to know whether it
is a TX or an RX VLAN, so it can install the appropriate type of TCAM
rule.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi
Needed by mhi-net patches.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When MSI_FLAG_ACTIVATE_EARLY is set (which is the case for PCI),
__msi_domain_alloc_irqs() performs the activation of the interrupt (which
in the case of PCI results in the endpoint being programmed) as soon as the
interrupt is allocated.
But it appears that this is only done for the first vector, introducing an
inconsistent behaviour for PCI Multi-MSI.
Fix it by iterating over the number of vectors allocated to each MSI
descriptor. This is easily achieved by introducing a new
"for_each_msi_vector" iterator, together with a tiny bit of refactoring.
Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early")
Reported-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210123122759.1781359-1-maz@kernel.org
|
|
Fix kprobe_on_func_entry() returns error code instead of false so that
register_kretprobe() can return an appropriate error code.
append_trace_kprobe() expects the kprobe registration returns -ENOENT
when the target symbol is not found, and it checks whether the target
module is unloaded or not. If the target module doesn't exist, it
defers to probe the target symbol until the module is loaded.
However, since register_kretprobe() returns -EINVAL instead of -ENOENT
in that case, it always fail on putting the kretprobe event on unloaded
modules. e.g.
Kprobe event:
/sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events
[ 16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue.
Kretprobe event: (p -> r)
/sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events
sh: write error: Invalid argument
/sys/kernel/debug/tracing # cat error_log
[ 41.122514] trace_kprobe: error: Failed to register probe event
Command: r xfs:xfs_end_io
^
To fix this bug, change kprobe_on_func_entry() to detect symbol lookup
failure and return -ENOENT in that case. Otherwise it returns -EINVAL
or 0 (succeeded, given address is on the entry).
Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 59158ec4aef7 ("tracing/kprobes: Check the probe on unloaded module correctly")
Reported-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The 'start' and 'end' arguments to tlb_gather_mmu() are no longer
needed now that there is a separate function for 'fullmm' flushing.
Remove the unused arguments and update all callers.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wjQWa14_4UpfDf=fiineNP+RH74kZeDMo_f1D35xNzq9w@mail.gmail.com
|
|
Passing the range '0, -1' to tlb_gather_mmu() sets the 'fullmm' flag,
which indicates that the mm_struct being operated on is going away. In
this case, some architectures (such as arm64) can elide TLB invalidation
by ensuring that the TLB tag (ASID) associated with this mm is not
immediately reclaimed. Although this behaviour is documented in
asm-generic/tlb.h, it's subtle and easily missed.
Introduce tlb_gather_mmu_fullmm() to make it clearer that this is for the
entire mm and WARN() if tlb_gather_mmu() is called with the 'fullmm'
address range.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20210127235347.1402-4-will@kernel.org
|
|
Since commit 7a30df49f63a ("mm: mmu_gather: remove __tlb_reset_range()
for force flush"), the 'start' and 'end' arguments to tlb_finish_mmu()
are no longer used, since we flush the whole mm in case of a nested
invalidation.
Remove the unused arguments and update all callers.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20210127235347.1402-3-will@kernel.org
|
|
allocted -> allocated
Signed-off-by: dingsenjie <dingsenjie@yulong.com>
Link: https://lore.kernel.org/r/20210127022801.8028-1-dingsenjie@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dcookies stuff was only used by the kernel's old oprofile code. Now
that oprofile's support is removed from the kernel, there is no need for
dcookies as well. Remove it.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
Remove kernel's old oprofile support.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org> #RCU
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The current layout of net_device is not optimal for cacheline usage.
The member adj_list.lower linked list is split between cacheline 2 and 3.
The ifindex is placed together with stats (struct net_device_stats),
although most modern drivers don't update this stats member.
The members netdev_ops, mtu and hard_header_len are placed on three
different cachelines. These members are accessed for XDP redirect into
devmap, which were noticeably with perf tool. When not using the map
redirect variant (like TC-BPF does), then ifindex is also used, which is
placed on a separate fourth cacheline. These members are also accessed
during forwarding with regular network stack. The members priv_flags and
flags are on fast-path for network stack transmit path in __dev_queue_xmit
(currently located together with mtu cacheline).
This patch creates a read mostly cacheline, with the purpose of keeping the
above mentioned members on the same cacheline.
Some netdev_features_t members also becomes part of this cacheline, which is
on purpose, as function netif_skb_features() is on fast-path via
validate_xmit_skb().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/161168277983.410784.12401225493601624417.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/can/dev.c
b552766c872f ("can: dev: prevent potential information leak in can_fill_info()")
3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir")
0a042c6ec991 ("can: dev: move netlink related code into seperate file")
Code move.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
214baf22870c ("net/mlx5e: Support HTB offload")
Adjacent code changes
net/switchdev/switchdev.c
20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers")
bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes")
Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 subfunction support
Parav Pandit says:
This patchset introduces support for mlx5 subfunction (SF).
A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.
When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.
A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.
A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.
Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.
Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.
overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.
A subfunction can be configured using devlink port function attribute
before its activated.
When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.
example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88
Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active
Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4
$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff
$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112
After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive
Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88
[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2
=================
* tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Add devlink subfunction port documentation
devlink: Extend devlink port documentation for subfunctions
devlink: Add devlink port documentation
net/mlx5: SF, Port function state change support
net/mlx5: SF, Add port add delete functionality
net/mlx5: E-switch, Add eswitch helpers for SF vport
net/mlx5: E-switch, Prepare eswitch to handle SF vport
net/mlx5: SF, Add auxiliary device driver
net/mlx5: SF, Add auxiliary device support
net/mlx5: Introduce vhca state event notifier
devlink: Support get and set state of port function
devlink: Support add and delete devlink port
devlink: Introduce PCI SF port flavour and port attribute
devlink: Prepare code to fill multiple port function attributes
====================
Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This effectively reverts 1db73ae39a97 ("of/device: Nullify match table
in of_match_device() for CONFIG_OF=n") because that commit makes it more
surprising to users of this API that the arguments may never be
referenced by any code. This is because the pre-processor will replace
the argument with NULL and then the match table will be left unreferenced
by any code but the compiler optimizer doesn't know to drop it. This can
lead to compilers warning that match tables are unused, when we really
want to pass the match table to the API but have the compiler see that
it's all inlined and not used and then drop the match table while
silencing the warning. We're being too smart here and not giving the
compiler the chance to do dead code elimination.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210123034428.2841052-7-swboyd@chromium.org
|
|
IO_PGTABLE_QUIRK_TLBI_ON_MAP is now fully superseded by the
core API's iotlb_sync_map callback.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5abb80bba3a7c371d5ffb7e59c05586deddb9a91.1611764372.git.robin.murphy@arm.com
[will: Remove unused 'iop' local variable from arm_v7s_map()]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several recent regressions and some bug fixes:
- Typo corrupting the max_recv_sge for cxgb4
- Regression from re-using kernel enums as a HW AbI in vmw_pvrdma
- Sleeping inside a spinlock in hns
- Revert the attempt to fix devlink deadlocks as the fix is more buggy
- Typo in sysfs_emit_at conversions
- Revert the removal of VLAN support in rxe"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
Revert "RDMA/rxe: Remove VLAN code leftovers from RXE"
RDMA/usnic: Fix misuse of sysfs_emit_at
Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion"
RDMA/hns: Use mutex instead of spinlock for ida allocation
RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC
RDMA/cxgb4: Fix the reported max_recv_sge value
|
|
Add initial hook up code to implement generic IO page table framework.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201215073705.123786-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently, because domain attach allows to be deferred from iommu
driver to device driver, and when iommu initializes, the devices
on the bus will be scanned and the default groups will be allocated.
Due to the above changes, some devices could be added to the same
group as below:
[ 3.859417] pci 0000:01:00.0: Adding to iommu group 16
[ 3.864572] pci 0000:01:00.1: Adding to iommu group 16
[ 3.869738] pci 0000:02:00.0: Adding to iommu group 17
[ 3.874892] pci 0000:02:00.1: Adding to iommu group 17
But when attaching these devices, it doesn't allow that a group has
more than one device, otherwise it will return an error. This conflicts
with the deferred attaching. Unfortunately, it has two devices in the
same group for my side, for example:
[ 9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
[ 9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
...
[ 10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
[ 10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
Finally, which caused the failure of tg3 driver when tg3 driver calls
the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
[ 9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
[ 9.754085] tg3: probe of 0000:01:00.0 failed with error -12
[ 9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
[ 10.043053] tg3: probe of 0000:01:00.1 failed with error -12
[ 10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
[ 10.334070] tg3: probe of 0000:02:00.0 failed with error -12
[ 10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
[ 10.622629] tg3: probe of 0000:02:00.1 failed with error -12
In addition, the similar situations also occur in other drivers such
as the bnxt_en driver. That can be reproduced easily in kdump kernel
when SME is active.
Let's move the handling currently in iommu_dma_deferred_attach() into
the iommu core code so that it can call the __iommu_attach_device()
directly instead of the iommu_attach_device(). The external interface
iommu_attach_device() is not suitable for handling this situation.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210126115337.20068-3-lijiang@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
futex(2) says that 'utime' is a pointer to 'const'. The implementation
doesn't use 'const'; however, it _never_ modifies the contents of utime.
- futex() either uses 'utime' as a pointer to struct or as a 'u32'.
- In case it's used as a 'u32', it makes a copy of it, and of course it is
not dereferenced.
- In case it's used as a 'struct __kernel_timespec __user *', the pointer
is not dereferenced inside the futex() definition, and it is only passed
to a function: get_timespec64(), which accepts a 'const struct
__kernel_timespec __user *'.
[ tglx: Make the same change to the compat syscall and fixup the prototypes. ]
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201128123945.4592-1-alx.manpages@gmail.com
|
