| Age | Commit message (Collapse) | Author |
|---|
|
Clean up. This significantly reduces the size of struct
svc_rdma_send_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently svc_rdma_sendto() migrates xdr_buf pages into a separate
page list and NULLs out a bunch of entries in rq_pages while the
pages are under I/O. The Send completion handler then frees those
pages later.
Instead, let's wait for the Send completion, then handle page
releasing in the nfsd thread. I'd like to avoid the cost of 250+
put_page() calls in the Send completion handler, which is single-
threaded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor a bit of commonly used logic so that every site that wants
a close deferred to an nfsd thread does all the right things
(set_bit(XPT_CLOSE) then enqueue).
Also, once XPT_CLOSE is set on a transport, it is never cleared. If
XPT_CLOSE is already set, then the close is already being handled
and the enqueue can be skipped.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Post more Receives when the number of pending Receives drops below
a water mark. The batch mechanism is disabled if the underlying
device cannot support a reasonably-sized Receive Queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 24f6b6036c9e ("dm table: fix zoned iterate_devices based device
capability checks") triggered dm table load failure when dm-zoned device
is set up for zoned block devices and a regular device for cache.
The commit inverted logic of two callback functions for iterate_devices:
device_is_zoned_model() and device_matches_zone_sectors(). The logic of
device_is_zoned_model() was inverted then all destination devices of all
targets in dm table are required to have the expected zoned model. This
is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices
since each target has only one destination device. However, this results
in failure for dm-zoned with regular cache device since that target has
both regular block device and zoned block devices.
As for device_matches_zone_sectors(), the commit inverted the logic to
require all zoned block devices in each target have the specified
zone_sectors. This check also fails for regular block device which does
not have zones.
To avoid the check failures, fix the zone model check and the zone
sectors check. For zone model check, introduce the new feature flag
DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the
target has this flag, allow it to have destination devices with any
zoned model. For zone sectors check, skip the check if the destination
device is not a zoned block device. Also add comments and improve an
error message to clarify expectations to the two checks.
Fixes: 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
There is a need for a non-blocking polling interface for RCU grace
periods, so this commit supplies start_poll_synchronize_rcu() and
poll_state_synchronize_rcu() for this purpose. Note that the existing
get_state_synchronize_rcu() may be used if future grace periods are
inevitable (perhaps due to a later call_rcu() invocation). The new
start_poll_synchronize_rcu() is to be used if future grace periods
might not otherwise happen. Finally, poll_state_synchronize_rcu()
provides a lockless check for a grace period having elapsed since
the corresponding call to either of the get_state_synchronize_rcu()
or start_poll_synchronize_rcu().
As with get_state_synchronize_rcu(), the return value from either
get_state_synchronize_rcu() or start_poll_synchronize_rcu() is passed in
to a later call to either poll_state_synchronize_rcu() or the existing
(might_sleep) cond_synchronize_rcu().
[ paulmck: Remove redundant smp_mb() per Frederic Weisbecker feedback. ]
[ Update poll_state_synchronize_rcu() docbook per Frederic Weisbecker feedback. ]
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There is a slew of defines, structs and enums and even a
function call only relevant for the charging code that
still lives in <linux/mfd/abx500.h>. Push it down to the
"ab8500-bm.h" header in the power supply subsystem where
it is actually used.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The charging algorithm header is only used locally in the
power supply subsystem so push this down into
drivers/power/supply and rename from the confusing
"ux500_chargalg.h" to "ab8500-chargalg.h" for clarity:
it is only used with the AB8500.
This is another remnant of non-DT code needing to pass
data from boardfiles, which we don't do anymore.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The global definition of platform data for the battery
management code has no utility after the OF conversion,
move the <linux/mfd/abx500/ab8500-bm.h> to be a local
file in drivers/power/supply and stop defining the
platform data in drivers/power/supply/ab8500_bmdata.c
and broadcast to the kernel only to have it assigned
as platform data to the MFD cells and then picked back
into the same subsystem that defined it in the first
place. This kills off a layer of indirection.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFSD initializes an encode xdr_stream only after the RPC layer has
already inserted the RPC Reply header. Thus it behaves differently
than xdr_init_encode does, which assumes the passed-in xdr_buf is
entirely devoid of content.
nfs4proc.c has this server-side stream initialization helper, but
it is visible only to the NFSv4 code. Move this helper to a place
that can be accessed by NFSv2 and NFSv3 server XDR functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Building with W=1 shows a few warnings for an empty macro:
drivers/gpu/drm/qxl/qxl_drv.c: In function 'qxl_pci_probe':
drivers/gpu/drm/qxl/qxl_drv.c:131:50: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
131 | vga_put(pdev, VGA_RSRC_LEGACY_IO);
| ^
drivers/gpu/drm/qxl/qxl_drv.c: In function 'qxl_pci_remove':
drivers/gpu/drm/qxl/qxl_drv.c:159:50: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
159 | vga_put(pdev, VGA_RSRC_LEGACY_IO);
Change this to an inline function to make it more robust and avoid
the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322105307.1291840-2-arnd@kernel.org
|
|
Currently quirks are only allowed for Slave devices. This patch
describes the need for two quirks at the Master level.
a) bus clash
The SoundWire specification allows a Slave device to report a bus clash
with the in-band interrupt mechanism when it detects a conflict while
driving a bitSlot it owns. This can be a symptom of an electrical conflict
or a programming error, and it's vital to detect reliably.
Unfortunately, on some platforms, bus clashes are randomly reported by
Slave devices after a bus reset, with an interrupt status set even before
the bus clash interrupt is enabled. These initial spurious interrupts are
not relevant and should optionally be filtered out, while leaving the
interrupt mechanism enabled to detect 'true' issues.
This patch suggests the addition of a Master level quirk to discard such
interrupts. The quirk should in theory have been added at the Slave level,
but since the problem was detected with different generations of Slave
devices it's hard to point to a specific IP. The problem might also be
board-dependent and hence dealing with a Master quirk is simpler.
b) parity
Additional tests on a new platform with the Maxim 98373 amplifier
showed a rare case where the parity interrupt is also thrown on
startup, at the same time as bus clashes. This issue only seems to
happen infrequently and was only observed during suspend-resume stress
tests while audio is streaming. We could make the problem go away by
adding a Slave-level quirk, but there is no evidence that the issue is
actually a Slave problem: the parity is provided by the Master, which
could also set an invalid parity in corner cases.
BugLink: https://github.com/thesofproject/linux/issues/2578
BugLink: https://github.com/thesofproject/linux/issues/2533
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210302082720.12322-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Platform firmware may have incorrect _ADR values causing the driver
probes to fail. Add the override_ops, which when configured will allow
for quirks based on DMI etc to override the addr values.
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210302075105.11515-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The imx3 camera driver has been removed a long time ago, so get
rid of this unused header file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The imx27/imx25 camera driver has been removed a long time ago,
so get rid of this unused header file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
We need the usb/thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Frequency Invariance Engine (FIE) is providing a frequency scaling
correction factor that helps achieve more accurate load-tracking.
Normally, this scaling factor can be obtained directly with the help of
the cpufreq drivers as they know the exact frequency the hardware is
running at. But that isn't the case for CPPC cpufreq driver.
Another way of obtaining that is using the arch specific counter
support, which is already present in kernel, but that hardware is
optional for platforms.
This patch updates the CPPC driver to register itself with the topology
core to provide its own implementation (cppc_scale_freq_tick()) of
topology_scale_freq_tick() which gets called by the scheduler on every
tick. Note that the arch specific counters have higher priority than
CPPC counters, if available, though the CPPC driver doesn't need to have
any special handling for that.
On an invocation of cppc_scale_freq_tick(), we schedule an irq work
(since we reach here from hard-irq context), which then schedules a
normal work item and cppc_scale_freq_workfn() updates the per_cpu
arch_freq_scale variable based on the counter updates since the last
tick.
To allow platforms to disable this CPPC counter-based frequency
invariance support, this is all done under CONFIG_ACPI_CPPC_CPUFREQ_FIE,
which is enabled by default.
This also exports sched_setattr_nocheck() as the CPPC driver can be
built as a module.
Cc: linux-acpi@vger.kernel.org
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Fix ~36 single-word typos in the IRQ, irqchip and irqdomain code comments.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix 3 single-word typos in the generic syscall entry code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix ~16 single-word typos in locking code comments.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix ~42 single-word typos in scheduler code comments.
We have accumulated a few fun ones over the years. :-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: linux-kernel@vger.kernel.org
|
|
Conflicts:
arch/x86/kernel/kprobes/ftrace.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add support for TI BQ78Z100, I2C interface gas gauge.
It provides a fully integrated safety protection
and authentication for 1 to 2-series cell Li-Ion and
Li-Polymer battery packs.
The patch was tested with BQ78Z100 equipment.
CASE I: Discharging:
POWER_SUPPLY_NAME=bq78z100-0
POWER_SUPPLY_STATUS=Discharging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_VOLTAGE_NOW=3386000
POWER_SUPPLY_CURRENT_NOW=-5000
POWER_SUPPLY_CAPACITY=27
POWER_SUPPLY_CAPACITY_LEVEL=Normal
POWER_SUPPLY_TEMP=269
POWER_SUPPLY_TIME_TO_EMPTY_NOW=1249920
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CHARGE_FULL=6494000
POWER_SUPPLY_CHARGE_NOW=1736000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
POWER_SUPPLY_CYCLE_COUNT=1
POWER_SUPPLY_POWER_AVG=-20000
POWER_SUPPLY_HEALTH=Good
POWER_SUPPLY_MANUFACTURER=Texas Instruments
CASE II : No discharging current:
POWER_SUPPLY_NAME=bq78z100-0
POWER_SUPPLY_STATUS=Not charging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_VOLTAGE_NOW=3386000
POWER_SUPPLY_CURRENT_NOW=0
POWER_SUPPLY_CAPACITY=27
POWER_SUPPLY_CAPACITY_LEVEL=Normal
POWER_SUPPLY_TEMP=270
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CHARGE_FULL=6494000
POWER_SUPPLY_CHARGE_NOW=1734000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
POWER_SUPPLY_CYCLE_COUNT=1
POWER_SUPPLY_POWER_AVG=0
POWER_SUPPLY_HEALTH=Good
POWER_SUPPLY_MANUFACTURER=Texas Instruments
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues"
* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
usb: dwc3: gadget: Prevent EP queuing while stopping transfers
usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
usb-storage: Add quirk to defeat Kindle's automatic unload
usb: gadget: configfs: Fix KASAN use-after-free
usbip: Fix incorrect double assignment to udc->ud.tcp_rx
usb: cdnsp: Fixes incorrect value in ISOC TRB
thunderbolt: Increase runtime PM reference count on DP tunnel discovery
thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Get static calls & modules right. Hopefully.
- WW mutex fixes
* tag 'locking-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
static_call: Fix static_call_update() sanity check
static_call: Align static_call_is_init() patching condition
static_call: Fix static_call_set_init()
locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini()
locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- another missing RT_PROP table related fix, to ensure that the
efivarfs pseudo filesystem fails gracefully if variable services
are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code
* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: use 32-bit alignment for efi_guid_t literals
firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
efivars: respect EFI_UNSUPPORTED return from firmware
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The freshest pile of shiny x86 fixes for 5.12:
- Add the arch-specific mapping between physical and logical CPUs to
fix devicetree-node lookups
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall
number. Split in a 4-patches set to avoid kABI breakage when
backporting to dead kernels"
* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/of: Fix CPU devicetree-node lookups
x86/ioapic: Ignore IRQ2 again
x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
x86: Move TS_COMPAT back to asm/thread_info.h
kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2021-03-20
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 3 day(s) which contain
a total of 8 files changed, 155 insertions(+), 12 deletions(-).
The main changes are:
1) Use correct nops in fexit trampoline, from Stanislav.
2) Fix BTF dump, from Jean-Philippe.
3) Fix umd memory leak, from Zqiang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull io_uring fixes from Jens Axboe:
"Quieter week this time, which was both expected and desired. About
half of the below is fixes for this release, the other half are just
fixes in general. In detail:
- Fix the freezing of IO threads, by making the freezer not send them
fake signals. Make them freezable by default.
- Like we did for personalities, move the buffer IDR to xarray. Kills
some code and avoids a use-after-free on teardown.
- SQPOLL cleanups and fixes (Pavel)
- Fix linked timeout race (Pavel)
- Fix potential completion post use-after-free (Pavel)
- Cleanup and move internal structures outside of general kernel view
(Stefan)
- Use MSG_SIGNAL for send/recv from io_uring (Stefan)"
* tag 'io_uring-5.12-2021-03-19' of git://git.kernel.dk/linux-block:
io_uring: don't leak creds on SQO attach error
io_uring: use typesafe pointers in io_uring_task
io_uring: remove structures from include/linux/io_uring.h
io_uring: imply MSG_NOSIGNAL for send[msg]()/recv[msg]() calls
io_uring: fix sqpoll cancellation via task_work
io_uring: add generic callback_head helpers
io_uring: fix concurrent parking
io_uring: halt SQO submission on ctx exit
io_uring: replace sqd rw_semaphore with mutex
io_uring: fix complete_post use ctx after free
io_uring: fix ->flags races by linked timeouts
io_uring: convert io_buffer_idr to XArray
io_uring: allow IO worker threads to be frozen
kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing
|
|
The syzbot reported a memleak as follows:
BUG: memory leak
unreferenced object 0xffff888101b41d00 (size 120):
comm "kworker/u4:0", pid 8, jiffies 4294944270 (age 12.780s)
backtrace:
[<ffffffff8125dc56>] alloc_pid+0x66/0x560
[<ffffffff81226405>] copy_process+0x1465/0x25e0
[<ffffffff81227943>] kernel_clone+0xf3/0x670
[<ffffffff812281a1>] kernel_thread+0x61/0x80
[<ffffffff81253464>] call_usermodehelper_exec_work
[<ffffffff81253464>] call_usermodehelper_exec_work+0xc4/0x120
[<ffffffff812591c9>] process_one_work+0x2c9/0x600
[<ffffffff81259ab9>] worker_thread+0x59/0x5d0
[<ffffffff812611c8>] kthread+0x178/0x1b0
[<ffffffff8100227f>] ret_from_fork+0x1f/0x30
unreferenced object 0xffff888110ef5c00 (size 232):
comm "kworker/u4:0", pid 8414, jiffies 4294944270 (age 12.780s)
backtrace:
[<ffffffff8154a0cf>] kmem_cache_zalloc
[<ffffffff8154a0cf>] __alloc_file+0x1f/0xf0
[<ffffffff8154a809>] alloc_empty_file+0x69/0x120
[<ffffffff8154a8f3>] alloc_file+0x33/0x1b0
[<ffffffff8154ab22>] alloc_file_pseudo+0xb2/0x140
[<ffffffff81559218>] create_pipe_files+0x138/0x2e0
[<ffffffff8126c793>] umd_setup+0x33/0x220
[<ffffffff81253574>] call_usermodehelper_exec_async+0xb4/0x1b0
[<ffffffff8100227f>] ret_from_fork+0x1f/0x30
After the UMD process exits, the pipe_to_umh/pipe_from_umh and
tgid need to be released.
Fixes: d71fa5c9763c ("bpf: Add kernel module with user mode driver that populates bpffs.")
Reported-by: syzbot+44908bb56d2bfe56b28e@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210317030915.2865-1-qiang.zhang@windriver.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
"- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current DEFINE_WW_MUTEX() macro fails to properly set up the lockdep
key of the ww_mutexes causing potential circular locking dependency
splat. Though it is possible to add more macro magic to make it work,
but the result is rather ugly.
Since locktorture was the only user of DEFINE_WW_MUTEX() and the
previous commit has just removed its use. It is easier to just remove
the macro to force future users of ww_mutexes to use ww_mutex_init()
for initialization.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210318172814.4400-4-longman@redhat.com
|
|
We are applying further, lower-prio fixes on top of two ww_mutex fixes in locking/urgent.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t") updated
the type definition of efi_guid_t to ensure that it always appears
sufficiently aligned (the UEFI spec is ambiguous about this, but given
the fact that its EFI_GUID type is defined in terms of a struct carrying
a uint32_t, the natural alignment is definitely >= 32 bits).
However, we missed the EFI_GUID() macro which is used to instantiate
efi_guid_t literals: that macro is still based on the guid_t type,
which does not have a minimum alignment at all. This results in warnings
such as
In file included from drivers/firmware/efi/mokvar-table.c:35:
include/linux/efi.h:1093:34: warning: passing 1-byte aligned argument to
4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
access [-Walign-mismatch]
status = get_var(L"SecureBoot", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size,
^
include/linux/efi.h:1101:24: warning: passing 1-byte aligned argument to
4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
access [-Walign-mismatch]
get_var(L"SetupMode", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size, &setupmode);
The distinction only matters on CPUs that do not support misaligned loads
fully, but 32-bit ARM's load-multiple instructions fall into that category,
and these are likely to be emitted by the compiler that built the firmware
for loading word-aligned 128-bit GUIDs from memory
So re-implement the initializer in terms of our own efi_guid_t type, so that
the alignment becomes a property of the literal's type.
Fixes: 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1327
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
All sbitmap code uses implied preemption protection to update
sb->alloc_hint except sbitmap_put(). Using implied preemption protection is
safe since the value of sb->alloc_hint only affects performance of sbitmap
allocations but not their correctness. Change this_cpu_ptr() in
sbitmap_put() into raw_cpu_ptr() to suppress the following kernel warning
that appears with preemption debugging enabled (CONFIG_DEBUG_PREEMPT):
BUG: using smp_processor_id() in preemptible [00000000] code: scsi_eh_0/152
caller is debug_smp_processor_id+0x17/0x20
CPU: 1 PID: 152 Comm: scsi_eh_0 Tainted: G W 5.12.0-rc1-dbg+ #6
Call Trace:
show_stack+0x52/0x58
dump_stack+0xaf/0xf3
check_preemption_disabled+0xce/0xd0
debug_smp_processor_id+0x17/0x20
scsi_device_unbusy+0x13a/0x1c0 [scsi_mod]
scsi_finish_command+0x4d/0x290 [scsi_mod]
scsi_eh_flush_done_q+0x1e7/0x280 [scsi_mod]
ata_scsi_port_error_handler+0x592/0x750 [libata]
ata_scsi_error+0x1a0/0x1f0 [libata]
scsi_error_handler+0x19e/0x330 [scsi_mod]
kthread+0x222/0x250
ret_from_fork+0x1f/0x30
Link: https://lore.kernel.org/r/20210317032648.9080-1-bvanassche@acm.org
Fixes: c548e62bcf6a ("scsi: sbitmap: Move allocation hint into sbitmap")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Several patches to testore use of memory barriers instead of RCU to
ensure consistent access to ruleset, from Mark Tomlinson.
2) Fix dump of expectation via ctnetlink, from Florian Westphal.
3) GRE helper works for IPv6, from Ludovic Senecaux.
4) Set error on unsupported flowtable flags.
5) Use delayed instead of deferrable workqueue in the flowtable,
from Yinjun Zhang.
6) Fix spurious EEXIST in case of add-after-delete flowtable in
the same batch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull VFIO fixes from Alex Williamson:
- Fix 32-bit issue with new unmap-all flag (Steve Sistare)
- Various Kconfig changes for better coverage (Jason Gunthorpe)
- Fix to batch pinning support (Daniel Jordan)
* tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: fix vaddr_get_pfns() return in vfio_pin_page_external()
vfio: Depend on MMU
ARM: amba: Allow some ARM_AMBA users to compile with COMPILE_TEST
vfio-platform: Add COMPILE_TEST to VFIO_PLATFORM
vfio: IOMMU_API should be selected
vfio/type1: fix unmap all on ILP32
|
|
Pull virtio fixes from Michael Tsirkin:
"Some fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails
vhost-vdpa: fix use-after-free of v->config_ctx
vhost: Fix vhost_vq_reset()
vhost_vdpa: fix the missing irq_bypass_unregister_producer() invocation
vdpa_sim: Skip typecasting from void*
virtio: remove export for virtio_config_{enable, disable}
virtio-mmio: Use to_virtio_mmio_device() to simply code
vdpa: set the virtqueue num during register
|
|
Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
aligns with the firmware settings.
Fixes: 36847f9e3e56 ("firmware: stratix10-svc: correct reconfig flag and timeout values")
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Link: https://lore.kernel.org/r/8c1d14f3748105f4caeda01716d47af2fa41d11c.1615809009.git.metze@samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we have had an artificial limitation of a single DMA tunnel
per XDomain connection. However, hardware wise there is no such limit
and software based connection manager can take advantage of all the DMA
rings available on the host to establish tunnels.
For this reason make the tb_xdomain_[enable|disable]_paths() to take the
DMA ring and HopID as parameter instead of storing them in the struct
tb_xdomain. We also add API functions to allocate input and output
HopIDs of the XDomain connection that the service drivers can use
instead of hard-coding.
Also convert the two existing service drivers over to this API.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 inter-domain spec mandates that the compatible hosts expose a new
property "maxhopid" that tells the connection manager on the other side
what is the maximum supported input HopID over the connection. Since
this is depend on the lane adapter the cable is connected it needs to be
filled in dynamically.
For this reason we take a copy of the global properties and fill then
for each XDomain connection upon first connect, and then keep updating
it if the generation changes as services are being added/removed. We
also take advantage of this copy to fill in the hostname.
We also expose this maxhopid as an attribute under each XDomain device.
While there drop kernel-doc entry for property_lock which seems to be
left there when the structure was originally introduced.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This function takes a deep copy of the properties. We need this in order
to support more dynamic properties per XDomain connection as required by
the USB4 inter-domain service spec.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This step is actually not needed. The service drivers themselves will
handle this once they have negotiated the service up and running again
with the remote side. Also dropping this makes it easier to add support
for multiple DMA tunnels over a single XDomain connection.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Qualcomm's MFD chips have a top level interrupt status register and
sub-irqs (peripherals). When a bit in the main status register goes
high, it means that the peripheral corresponding to that bit has an
unserviced interrupt. If the bit is not set, this means that the
corresponding peripheral does not.
Commit a2d21848d9211d ("regmap: regmap-irq: Add main status register
support") introduced the sub-irq logic that is currently applied only
when reading status registers, but not for any other functions like acking
or masking. Extend the use of sub-irq to all other functions, with two
caveats regarding the specification of offsets:
- Each member of the sub_reg_offsets array should be of length 1
- The specified offsets should be the unequal strides for each sub-irq
device.
In QCOM's case, all the *_base registers are to be configured to the
base addresses of the first sub-irq group, with offsets of each
subsequent group calculated as a difference from these addresses.
Continuing from the example mentioned in the cover letter:
/*
* Address of MISC_INT_MASK = 0x1011
* Address of TEMP_ALARM_INT_MASK = 0x2011
* Address of GPIO01_INT_MASK = 0x3011
*
* Calculate offsets as:
* offset_0 = 0x1011 - 0x1011 = 0 (to access MISC's
* registers)
* offset_1 = 0x2011 - 0x1011 = 0x1000
* offset_2 = 0x3011 - 0x1011 = 0x2000
*/
static unsigned int sub_unit0_offsets[] = {0};
static unsigned int sub_unit1_offsets[] = {0x1000};
static unsigned int sub_unit2_offsets[] = {0x2000};
static struct regmap_irq_sub_irq_map chip_sub_irq_offsets[] = {
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
};
static struct regmap_irq_chip chip_irq_chip = {
--------8<--------
.not_fixed_stride = true,
.mask_base = MISC_INT_MASK,
.type_base = MISC_INT_TYPE,
.ack_base = MISC_INT_ACK,
.sub_reg_offsets = chip_sub_irq_offsets,
--------8<--------
};
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Link: https://lore.kernel.org/r/526562423eaa58b4075362083f561841f1d6956c.1615423027.git.gurus@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-18
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 336 insertions(+), 94 deletions(-).
The main changes are:
1) Fix fexit/fmod_ret trampoline for sleepable programs, and also fix a ftrace
splat in modify_ftrace_direct() on address change, from Alexei Starovoitov.
2) Fix two oob speculation possibilities that allows unprivileged to leak mem
via side-channel, from Piotr Krysiuk and Daniel Borkmann.
3) Fix libbpf's netlink handling wrt SOCK_CLOEXEC, from Kumar Kartikeya Dwivedi.
4) Fix libbpf's error handling on failure in getting section names, from Namhyung Kim.
5) Fix tunnel collect_md BPF selftest wrt Geneve option handling, from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
