summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2021-01-29Merge branch 'mhi-net-immutable' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi Needed by mhi-net patches. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-30genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is setMarc Zyngier
When MSI_FLAG_ACTIVATE_EARLY is set (which is the case for PCI), __msi_domain_alloc_irqs() performs the activation of the interrupt (which in the case of PCI results in the endpoint being programmed) as soon as the interrupt is allocated. But it appears that this is only done for the first vector, introducing an inconsistent behaviour for PCI Multi-MSI. Fix it by iterating over the number of vectors allocated to each MSI descriptor. This is easily achieved by introducing a new "for_each_msi_vector" iterator, together with a tiny bit of refactoring. Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early") Reported-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210123122759.1781359-1-maz@kernel.org
2021-01-29tracing/kprobe: Fix to support kretprobe events on unloaded modulesMasami Hiramatsu
Fix kprobe_on_func_entry() returns error code instead of false so that register_kretprobe() can return an appropriate error code. append_trace_kprobe() expects the kprobe registration returns -ENOENT when the target symbol is not found, and it checks whether the target module is unloaded or not. If the target module doesn't exist, it defers to probe the target symbol until the module is loaded. However, since register_kretprobe() returns -EINVAL instead of -ENOENT in that case, it always fail on putting the kretprobe event on unloaded modules. e.g. Kprobe event: /sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events [ 16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue. Kretprobe event: (p -> r) /sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events sh: write error: Invalid argument /sys/kernel/debug/tracing # cat error_log [ 41.122514] trace_kprobe: error: Failed to register probe event Command: r xfs:xfs_end_io ^ To fix this bug, change kprobe_on_func_entry() to detect symbol lookup failure and return -ENOENT in that case. Otherwise it returns -EINVAL or 0 (succeeded, given address is on the entry). Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 59158ec4aef7 ("tracing/kprobes: Check the probe on unloaded module correctly") Reported-by: Jianlin Lv <Jianlin.Lv@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-29tlb: mmu_gather: Remove start/end arguments from tlb_gather_mmu()Will Deacon
The 'start' and 'end' arguments to tlb_gather_mmu() are no longer needed now that there is a separate function for 'fullmm' flushing. Remove the unused arguments and update all callers. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Yu Zhao <yuzhao@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/CAHk-=wjQWa14_4UpfDf=fiineNP+RH74kZeDMo_f1D35xNzq9w@mail.gmail.com
2021-01-29tlb: mmu_gather: Introduce tlb_gather_mmu_fullmm()Will Deacon
Passing the range '0, -1' to tlb_gather_mmu() sets the 'fullmm' flag, which indicates that the mm_struct being operated on is going away. In this case, some architectures (such as arm64) can elide TLB invalidation by ensuring that the TLB tag (ASID) associated with this mm is not immediately reclaimed. Although this behaviour is documented in asm-generic/tlb.h, it's subtle and easily missed. Introduce tlb_gather_mmu_fullmm() to make it clearer that this is for the entire mm and WARN() if tlb_gather_mmu() is called with the 'fullmm' address range. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Yu Zhao <yuzhao@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20210127235347.1402-4-will@kernel.org
2021-01-29tlb: mmu_gather: Remove unused start/end arguments from tlb_finish_mmu()Will Deacon
Since commit 7a30df49f63a ("mm: mmu_gather: remove __tlb_reset_range() for force flush"), the 'start' and 'end' arguments to tlb_finish_mmu() are no longer used, since we flush the whole mm in case of a nested invalidation. Remove the unused arguments and update all callers. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Yu Zhao <yuzhao@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20210127235347.1402-3-will@kernel.org
2021-01-28linux/qed: fix spelling typo in qed_chain.hdingsenjie
allocted -> allocated Signed-off-by: dingsenjie <dingsenjie@yulong.com> Link: https://lore.kernel.org/r/20210127022801.8028-1-dingsenjie@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29fs: Remove dcookies supportViresh Kumar
The dcookies stuff was only used by the kernel's old oprofile code. Now that oprofile's support is removed from the kernel, there is no need for dcookies as well. Remove it. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-29drivers: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove kernel's old oprofile support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> #RCU Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-28net: adjust net_device layout for cacheline usageJesper Dangaard Brouer
The current layout of net_device is not optimal for cacheline usage. The member adj_list.lower linked list is split between cacheline 2 and 3. The ifindex is placed together with stats (struct net_device_stats), although most modern drivers don't update this stats member. The members netdev_ops, mtu and hard_header_len are placed on three different cachelines. These members are accessed for XDP redirect into devmap, which were noticeably with perf tool. When not using the map redirect variant (like TC-BPF does), then ifindex is also used, which is placed on a separate fourth cacheline. These members are also accessed during forwarding with regular network stack. The members priv_flags and flags are on fast-path for network stack transmit path in __dev_queue_xmit (currently located together with mtu cacheline). This patch creates a read mostly cacheline, with the purpose of keeping the above mentioned members on the same cacheline. Some netdev_features_t members also becomes part of this cacheline, which is on purpose, as function netif_skb_features() is on fast-path via validate_xmit_skb(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/161168277983.410784.12401225493601624417.stgit@firesoul Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge tag 'mlx5-updates-2021-01-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 subfunction support Parav Pandit says: This patchset introduces support for mlx5 subfunction (SF). A subfunction is a lightweight function that has a parent PCI function on which it is deployed. mlx5 subfunction has its own function capabilities and its own resources. This means a subfunction has its own dedicated queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from the parent PCI function. When subfunction is RDMA capable, it has its own QP1, GID table and rdma resources neither shared nor stolen from the parent PCI function. A subfunction has dedicated window in PCI BAR space that is not shared with the other subfunctions or parent PCI function. This ensures that all class devices of the subfunction accesses only assigned PCI BAR space. A Subfunction supports eswitch representation through which it supports tc offloads. User must configure eswitch to send/receive packets from/to subfunction port. Subfunctions share PCI level resources such as PCI MSI-X IRQs with their other subfunctions and/or with its parent PCI function. Subfunction support is discussed in detail in RFC [1] and [2]. RFC [1] and extension [2] describes requirements, design and proposed plumbing using devlink, auxiliary bus and sysfs for systemd/udev support. Functionality of this patchset is best explained using real examples further below. overview: -------- A subfunction can be created and deleted by a user using devlink port add/delete interface. A subfunction can be configured using devlink port function attribute before its activated. When a subfunction is activated, it results in an auxiliary device on the host PCI device where it is deployed. A driver binds to the auxiliary device that further creates supported class devices. example subfunction usage sequence: ----------------------------------- Change device to switchdev mode: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Add a devlink port of subfunction flavour: $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 Configure mac address of the port function: $ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88 Now activate the function: $ devlink port function set ens2f0npf0sf88 state active Now use the auxiliary device and class devices: $ devlink dev show pci/0000:06:00.0 auxiliary/mlx5_core.sf.4 $ ip link show 127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff altname enp6s0f0np0 129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff $ rdma dev show 43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112 44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112 After use inactivate the function: $ devlink port function set ens2f0npf0sf88 state inactive Now delete the subfunction port: $ devlink port del ens2f0npf0sf88 [1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/ [2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2 ================= * tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Add devlink subfunction port documentation devlink: Extend devlink port documentation for subfunctions devlink: Add devlink port documentation net/mlx5: SF, Port function state change support net/mlx5: SF, Add port add delete functionality net/mlx5: E-switch, Add eswitch helpers for SF vport net/mlx5: E-switch, Prepare eswitch to handle SF vport net/mlx5: SF, Add auxiliary device driver net/mlx5: SF, Add auxiliary device support net/mlx5: Introduce vhca state event notifier devlink: Support get and set state of port function devlink: Support add and delete devlink port devlink: Introduce PCI SF port flavour and port attribute devlink: Prepare code to fill multiple port function attributes ==================== Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28of/device: Don't NULLify match table in of_match_device() with CONFIG_OF=nStephen Boyd
This effectively reverts 1db73ae39a97 ("of/device: Nullify match table in of_match_device() for CONFIG_OF=n") because that commit makes it more surprising to users of this API that the arguments may never be referenced by any code. This is because the pre-processor will replace the argument with NULL and then the match table will be left unreferenced by any code but the compiler optimizer doesn't know to drop it. This can lead to compilers warning that match tables are unused, when we really want to pass the match table to the API but have the compiler see that it's all inlined and not used and then drop the match table while silencing the warning. We're being too smart here and not giving the compiler the chance to do dead code elimination. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Frank Rowand <frowand.list@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210123034428.2841052-7-swboyd@chromium.org
2021-01-28iommu/io-pgtable: Remove TLBI_ON_MAP quirkRobin Murphy
IO_PGTABLE_QUIRK_TLBI_ON_MAP is now fully superseded by the core API's iotlb_sync_map callback. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/5abb80bba3a7c371d5ffb7e59c05586deddb9a91.1611764372.git.robin.murphy@arm.com [will: Remove unused 'iop' local variable from arm_v7s_map()] Signed-off-by: Will Deacon <will@kernel.org>
2021-01-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Several recent regressions and some bug fixes: - Typo corrupting the max_recv_sge for cxgb4 - Regression from re-using kernel enums as a HW AbI in vmw_pvrdma - Sleeping inside a spinlock in hns - Revert the attempt to fix devlink deadlocks as the fix is more buggy - Typo in sysfs_emit_at conversions - Revert the removal of VLAN support in rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: Revert "RDMA/rxe: Remove VLAN code leftovers from RXE" RDMA/usnic: Fix misuse of sysfs_emit_at Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion" RDMA/hns: Use mutex instead of spinlock for ida allocation RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC RDMA/cxgb4: Fix the reported max_recv_sge value
2021-01-28iommu/amd: Prepare for generic IO page table frameworkSuravee Suthikulpanit
Add initial hook up code to implement generic IO page table framework. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20201215073705.123786-3-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-28iommu: use the __iommu_attach_device() directly for deferred attachLianbo Jiang
Currently, because domain attach allows to be deferred from iommu driver to device driver, and when iommu initializes, the devices on the bus will be scanned and the default groups will be allocated. Due to the above changes, some devices could be added to the same group as below: [ 3.859417] pci 0000:01:00.0: Adding to iommu group 16 [ 3.864572] pci 0000:01:00.1: Adding to iommu group 16 [ 3.869738] pci 0000:02:00.0: Adding to iommu group 17 [ 3.874892] pci 0000:02:00.1: Adding to iommu group 17 But when attaching these devices, it doesn't allow that a group has more than one device, otherwise it will return an error. This conflicts with the deferred attaching. Unfortunately, it has two devices in the same group for my side, for example: [ 9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0 [ 9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1 ... [ 10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0 [ 10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1 Finally, which caused the failure of tg3 driver when tg3 driver calls the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma(). [ 9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting [ 9.754085] tg3: probe of 0000:01:00.0 failed with error -12 [ 9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting [ 10.043053] tg3: probe of 0000:01:00.1 failed with error -12 [ 10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting [ 10.334070] tg3: probe of 0000:02:00.0 failed with error -12 [ 10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting [ 10.622629] tg3: probe of 0000:02:00.1 failed with error -12 In addition, the similar situations also occur in other drivers such as the bnxt_en driver. That can be reproduced easily in kdump kernel when SME is active. Let's move the handling currently in iommu_dma_deferred_attach() into the iommu core code so that it can call the __iommu_attach_device() directly instead of the iommu_attach_device(). The external interface iommu_attach_device() is not suitable for handling this situation. Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20210126115337.20068-3-lijiang@redhat.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-28futex: Change utime parameter to be 'const ... *'Alejandro Colomar
futex(2) says that 'utime' is a pointer to 'const'. The implementation doesn't use 'const'; however, it _never_ modifies the contents of utime. - futex() either uses 'utime' as a pointer to struct or as a 'u32'. - In case it's used as a 'u32', it makes a copy of it, and of course it is not dereferenced. - In case it's used as a 'struct __kernel_timespec __user *', the pointer is not dereferenced inside the futex() definition, and it is only passed to a function: get_timespec64(), which accepts a 'const struct __kernel_timespec __user *'. [ tglx: Make the same change to the compat syscall and fixup the prototypes. ] Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201128123945.4592-1-alx.manpages@gmail.com
2021-01-28iommu/vt-d: Preset Access/Dirty bits for IOVA over FLLu Baolu
The Access/Dirty bits in the first level page table entry will be set whenever a page table entry was used for address translation or write permission was successfully translated. This is always true when using the first-level page table for kernel IOVA. Instead of wasting hardware cycles to update the certain bits, it's better to set them up at the beginning. Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210115004202.953965-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27net/mlx5e: Add trap entity to ETH driverAya Levin
Introduce mlx5e_trap which includes a dedicated RQ and NAPI for trapped packets. Trap-RQ processes packets that were destined to be dropped, but for debug and visibility sake these packets are trapped and reported to devlink. Trap-RQ connects between the HW and the driver and is not a part of a channel. Open mlx5e_create_rq() and mlx5_core_destroy_rq() as API and add dedicate RQ handlers which report to devlink of trapped packets. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net/mlx5: Notify on trap action by blocking eventAya Levin
In order to allow mlx5 core driver to trigger synchronous operations to its consumers, add a blocking events handler. Add wrappers to blocking_notifier_[call_chain/chain_register/chain_unregister]. Add trap callback for action set and notify about this change. Following patches in the set add a listener for this event. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net/mlx5: Add support for devlink traps in mlx5 core driverAya Levin
Add devlink traps infra-structure to mlx5 core driver. Add traps list to mlx5_priv and corresponding API: - mlx5_devlink_trap_report() to wrap trap reports to devlink - mlx5_devlink_trap_get_num_active() to decide whether to open/close trap resources. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27Merge tag 'linux-can-next-for-5.12-20210127' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-01-27 The first two patches are by me and fix typos on the CAN gw protocol and the flexcan driver. The next patch is by Vincent Mailhol and targets the CAN driver infrastructure, it exports the function that converts the CAN state into a human readable string. A patch by me, which target the CAN driver infrastructure, too, makes the calculation in can_fd_len2dlc() more readable. A patch by Tom Rix fixes a checkpatch warning in the mcba_usb driver. The next seven patches target the mcp251xfd driver. Su Yanjun's patch replaces several hardcoded assumptions when calling regmap, by using regmap_get_val_bytes(). The remaining patches are by me. First an open coded check is replaced by an existing helper function, then in the TX path the padding for CAN-FD frames is cleaned up. The next two patches clean up the RTR frame handling in the RX and TX path. Then support for len8_dlc is added. The last patch adds BQL support. * tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: mcp251xfd: add BQL support can: mcp251xfd: add len8_dlc support can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap can: mcba_usb: remove h from printk format specifier can: length: can_fd_len2dlc(): make legnth calculation readable again can: dev: export can_get_state_str() function can: flexcan: fix typos can: gw: fix typo ==================== Link: https://lore.kernel.org/r/20210127092227.2775573-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27bpf: Allow rewriting to ports under ip_unprivileged_port_startStanislav Fomichev
At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port to the privileged ones (< ip_unprivileged_port_start), but it will be rejected later on in the __inet_bind or __inet6_bind. Let's add another return value to indicate that CAP_NET_BIND_SERVICE check should be ignored. Use the same idea as we currently use in cgroup/egress where bit #1 indicates CN. Instead, for cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should be bypassed. v5: - rename flags to be less confusing (Andrey Ignatov) - rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags and accept BPF_RET_SET_CN (no behavioral changes) v4: - Add missing IPv6 support (Martin KaFai Lau) v3: - Update description (Martin KaFai Lau) - Fix capability restore in selftest (Martin KaFai Lau) v2: - Switch to explicit return code (Martin KaFai Lau) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
2021-01-27hwmon: (pmbus) Add a PMBUS_NO_CAPABILITY platform data flagEddie James
Some PMBus chips don't respond with valid data when reading the CAPABILITY register. Add a flag that device drivers can set so that the PMBus core driver doesn't use CAPABILITY to determine it's behavior. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20201222152640.27749-2-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-28skmsg: Make sk_psock_destroy() staticCong Wang
sk_psock_destroy() is a RCU callback, I can't see any reason why it could be used outside. Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210127221501.46866-1-xiyou.wangcong@gmail.com
2021-01-27libfs: unexport generic_ci_d_compare() and generic_ci_d_hash()Eric Biggers
Now that generic_set_encrypted_ci_d_ops() has been added and ext4 and f2fs are using it, it's no longer necessary to export generic_ci_d_compare() and generic_ci_d_hash() to filesystems. Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27f2fs: compress: support compress levelChao Yu
Expand 'compress_algorithm' mount option to accept parameter as format of <algorithm>:<level>, by this way, it gives a way to allow user to do more specified config on lz4 and zstd compression level, then f2fs compression can provide higher compress ratio. In order to set compress level for lz4 algorithm, it needs to set CONFIG_LZ4HC_COMPRESS and CONFIG_F2FS_FS_LZ4HC config to enable lz4hc compress algorithm. CR and performance number on lz4/lz4hc algorithm: dd if=enwik9 of=compressed_file conv=fsync Original blocks: 244382 lz4 lz4hc-9 compressed blocks 170647 163270 compress ratio 69.8% 66.8% speed 16.4207 s, 60.9 MB/s 26.7299 s, 37.4 MB/s compress ratio = after / before Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-27PM: clk: make PM clock layer compatible with clocks that must sleepNicolas Pitre
The clock API splits its interface into sleepable ant atomic contexts: - clk_prepare/clk_unprepare for stuff that might sleep - clk_enable_clk_disable for anything that may be done in atomic context The code handling runtime PM for clocks only calls clk_disable() on suspend requests, and clk_enable on resume requests. This means that runtime PM with clock providers that only have the prepare/unprepare methods implemented is basically useless. Many clock implementations can't accommodate atomic contexts. This is often the case when communication with the clock happens through another subsystem like I2C or SCMI. Let's make the clock PM code useful with such clocks by safely invoking clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when such clocks are registered with the PM layer then pm_runtime_irq_safe() can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume() may be invoked in atomic context. For clocks that do implement the enable and disable methods then everything just works as before. A note on sparse: According to https://lwn.net/Articles/109066/ there are things that sparse can't cope with. In particular, pm_clk_op_lock() and pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on some runtime condition. To work around that we tell it the lock is always untaken for the purpose of static analisys. Thanks to Naresh Kamboju for reporting issues with the initial patch. Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27ACPI: platform-profile: Introduce object pointers to callbacksJiaxun Yang
Add an object pointer to handler callbacks to avoid the need for drivers to have a global variable to get to their driver-data struct. Link: https://lore.kernel.org/linux-acpi/6a29f338-d9e4-150c-81dd-2ffb54f5bc35@redhat.com/ Link: https://lore.kernel.org/r/20210114073429.176462-3-jiaxun.yang@flygoat.com Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27mm: remove get_swap_bioChristoph Hellwig
Just reuse the block_device and sector from the swap_info structure, just as used by the SWP_SYNCHRONOUS path. Also remove the checks for NULL returns from bio_alloc as that can't happen for sleeping allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27block: use an on-stack bio in blkdev_issue_flushChristoph Hellwig
There is no point in allocating memory for a synchronous flush. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27block: split bio_kmalloc from bio_alloc_biosetChristoph Hellwig
bio_kmalloc shares almost no logic with the bio_set based fast path in bio_alloc_bioset. Split it into an entirely separate implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27sched: Correctly sort struct predeclarationsPeter Oskolkov
The comment says: /* task_struct member predeclarations (sorted alphabetically): */ So move io_uring_task where it belongs (alphabetically). Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210126193449.487547-1-posk@google.com
2021-01-27sched/topology: Make sched_init_numa() use a set for the deduplicating sortValentin Schneider
The deduplicating sort in sched_init_numa() assumes that the first line in the distance table contains all unique values in the entire table. I've been trying to pen what this exactly means for the topology, but it's not straightforward. For instance, topology.c uses this example: node 0 1 2 3 0: 10 20 20 30 1: 20 10 20 20 2: 20 20 10 20 3: 30 20 20 10 0 ----- 1 | / | | / | | / | 2 ----- 3 Which works out just fine. However, if we swap nodes 0 and 1: 1 ----- 0 | / | | / | | / | 2 ----- 3 we get this distance table: node 0 1 2 3 0: 10 20 20 20 1: 20 10 20 30 2: 20 20 10 20 3: 20 30 20 10 Which breaks the deduplicating sort (non-representative first line). In this case this would just be a renumbering exercise, but it so happens that we can have a deduplicating sort that goes through the whole table in O(n²) at the extra cost of a temporary memory allocation (i.e. any form of set). The ACPI spec (SLIT) mentions distances are encoded on 8 bits. Following this, implement the set as a 256-bits bitmap. Should this not be satisfactory (i.e. we want to support 32-bit values), then we'll have to go for some other sparse set implementation. This has the added benefit of letting us allocate just the right amount of memory for sched_domains_numa_distance[], rather than an arbitrary (nr_node_ids + 1). Note: DT binding equivalent (distance-map) decodes distances as 32-bit values. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210122123943.1217-2-valentin.schneider@arm.com
2021-01-27iommu/io-pgtable: Allow io_pgtable_tlb ops optionalYong Wu
This patch allows io_pgtable_tlb ops could be null since the IOMMU drivers may use the tlb ops from iommu framework. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210107122909.16317-6-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-27iommu: Switch gather->end to the inclusive endYong Wu
Currently gather->end is "unsigned long" which may be overflow in arch32 in the corner case: 0xfff00000 + 0x100000(iova + size). Although it doesn't affect the size(end - start), it affects the checking "gather->end < end" This patch changes this "end" to the real end address (end = start + size - 1). Correspondingly, update the length to "end - start + 1". Fixes: a7d20dc19d9e ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210107122909.16317-5-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-27iommu: Add iova and size as parameters in iotlb_sync_mapYong Wu
iotlb_sync_map allow IOMMU drivers tlb sync after completing the whole mapping. This patch adds iova and size as the parameters in it. then the IOMMU driver could flush tlb with the whole range once after iova mapping to improve performance. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210107122909.16317-3-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-27iommu: Delete iommu_dev_has_feature()John Garry
Function iommu_dev_has_feature() has never been referenced in the tree, and there does not appear to be anything coming soon to use it, so delete it. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1609940111-28563-7-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27iommu: Delete iommu_domain_window_disable()John Garry
Function iommu_domain_window_disable() is not referenced in the tree, so delete it. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1609940111-28563-6-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27iova: Delete copy_reserved_iova()John Garry
Since commit c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops"), function copy_reserved_iova() is not referenced, so delete it. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1609940111-28563-3-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27bus: mhi: core: Add helper API to return number of free TREsHemant Kumar
Introduce mhi_get_free_desc_count() API to return number of TREs available to queue buffer. MHI clients can use this API to know before hand if ring is full without calling queue API. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1610388462-16322-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-27iova: Make has_iova_flush_queue() privateJohn Garry
Function has_iova_flush_queue() has no users outside iova.c, so make it private. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1609940111-28563-2-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-27can: dev: export can_get_state_str() functionVincent Mailhol
The can_get_state_str() function is also relevant to the drivers. Export the symbol and make it visible in the can/dev.h header. Link: https://lore.kernel.org/r/20210119170355.12040-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-26net: allow user to set metric on default route learned via Router AdvertisementPraveen Chaudhary
For IPv4, default route is learned via DHCPv4 and user is allowed to change metric using config etc/network/interfaces. But for IPv6, default route can be learned via RA, for which, currently a fixed metric value 1024 is used. Ideally, user should be able to configure metric on default route for IPv6 similar to IPv4. This patch adds sysctl for the same. Logs: For IPv4: Config in etc/network/interfaces: auto eth0 iface eth0 inet dhcp metric 4261413864 IPv4 Kernel Route Table: $ ip route list default via 172.21.47.1 dev eth0 metric 4261413864 FRR Table, if a static route is configured: [In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.] Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, > - selected route, * - FIB route S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03 K 0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m i.e. User can prefer Default Router learned via Routing Protocol in IPv4. Similar behavior is not possible for IPv6, without this fix. After fix [for IPv6]: sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705 IP monitor: [When IPv6 RA is received] default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 pref high Kernel IPv6 routing table $ ip -6 route list default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high FRR Table, if a static route is configured: [In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.] Codes: K - kernel route, C - connected, S - static, R - RIPng, O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, > - selected route, * - FIB route S>* ::/0 [20/0] is directly connected, eth0, 00:00:06 K ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m If the metric is changed later, the effect will be seen only when next IPv6 RA is received, because the default route must be fully controlled by RA msg. Below metric is changed from 1996489705 to 1996489704. $ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704 net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704 IP monitor: [On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric] Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 3sec hoplimit 64 pref high default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704 pref high Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com> Signed-off-by: Zhenggen Xu <zxu@linkedin.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210125214430.24079-1-pchaudhary@linkedin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26block: unexport truncate_bdev_rangeChristoph Hellwig
truncate_bdev_range is only used in always built-in block layer code, so remove the export and the !CONFIG_BLOCK stub. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26Merge tag 'regulator-fix-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "The main thing here is a change to make sure that we don't try to double resolve the supply of a regulator if we have two probes going on simultaneously, plus an incremental fix on top of that to resolve a lockdep issue it introduced. There's also a patch from Dmitry Osipenko adding stubs for some functions to avoid build issues in consumers in some configurations" * tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix lockdep warning resolving supplies regulator: consumer: Add missing stubs to regulator/consumer.h regulator: core: avoid regulator_resolve_supply() race condition
2021-01-26media: device property: Define format macros for ports and endpointsDaniel Scally
OF, ACPI and software_nodes all implement graphs including nodes for ports and endpoints. These are all intended to be named with a common schema, as "port@n" and "endpoint@n" where n is an unsigned int representing the index of the node. To ensure commonality across the subsystems, provide a set of macros to define the format. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-26serial: ifx6x60: Remove driver for deprecated platformAndy Shevchenko
Intel Moorestown and Medfield are quite old Intel Atom based 32-bit platforms, which were in limited use in some Android phones, tablets and consumer electronics more than eight years ago. There are no bugs or problems ever reported outside from Intel for breaking any of that platforms for years. It seems no real users exists who run more or less fresh kernel on it. The commit 05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align with this theory. Due to above and to reduce a burden of supporting outdated drivers we remove the support of outdated platforms completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210125150238.16980-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26staging: hikey9xx: hi6421v600-regulator: fix delay logicMauro Carvalho Chehab
The original driver, which can be seen at commit 42f24d9d446a ("staging: regulator: add a regulator driver for HiSilicon 6421v600 SPMI PMIC") had a complex logic to ensure that there won't be multiple power enable/disable commands running at the same time. At the original logic, it were ensured that: - a next power up/down would wait for at least the on/off period; - an extra delay would be granted. It turns that such extra delay has a value of zero, but it was relying on gettimeofday() call, which can take some time. This was later simplified, but there are still some possible issues. In order to avoid that, let's simply add a delay to wait for the power up line to stabilize after powering up a device. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6733dac9813ba6688def404142cb7b964accf758.1611212783.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 05:42:05 +0000