| Age | Commit message (Collapse) | Author |
|---|
|
We store one pre-allocated rsrc node in ->rsrc_backup_node, merge it
with ->rsrc_node_cache.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6d5410e51ccd29be7a716be045b51d6b371baef6.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the SDIO vendor ID for Realtek and some device IDs extracted from
their GPL vendor driver. This will be useful in the future when the
rtw88 driver gains support for these chips.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230405200729.632435-7-martin.blumenstingl@googlemail.com
|
|
Add the definitions for the registers responsible for voltage
monitoring. Add a voltage monitor enable bitfield per regulator.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230403-da9063-disable-unused-v3-1-cc4dc698864c@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for runtime pm ops for AMD SoundWire manager driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230227154801.50319-7-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-7-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for handling SoundWire manager interrupts.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230227154801.50319-6-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-6-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Register dai ops for SoundWire manager instances.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230227154801.50319-4-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-4-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
AMD ACP(v6.x) IP block has two SoundWire manager devices.
Add support for
- Manager driver probe & remove sequence
- Helper functions to enable/disable interrupts,
Initialize sdw manager, enable sdw pads
- Manager driver sdw_master_ops & port_ops callbacks
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230310162554.699766-3-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-3-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.4 cycle.
New device support
* bosch,bmp280
- Add support for BMP580 - includes significant refactoring and general
driver cleanup + support for non-volatile memory for trimming and config
parameters.
* rohm BU27034
- New driver for this 3 channel ambient light sensor.
- New support library for devices where both integration time and
amplifier gain are configurable. In these cases a scale change
may require changing bother underlying values. This library module
provides code to help with this.
* st,accel
- Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
- Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
- New driver for these 16 bit ADCs.
* ti,tmp117
- Add support for older tmp116 device. Includes some general driver cleanup.
Staging driver drops
* adi,ade7854
- Driver was a very long way from compliant with IIO infrastructure and ABI.
If anyone wants a non staging version of this driver they are better off
starting from scratch. Hence drop it and the associated meter.h header.
Features
* adi,ad7441r
- Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
- Support older register mapping from firmware designed for windows.
Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
making them consistent and clear.
Cleanups and minor fixes:
* adi,ad5592r
- Add GPIO names - useful for debug.
* adi,ad7441r
- Fix current input, loop powered mode configuration setup.
* adi,adis16475
- Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
- Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
- Fix wrong bits for writing config register (late fix and has
been broken a long time so not rushed upstream)
* amlogic,meson-saradc
- Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
- Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
retries.
- Add local mutex to close various races.
- Use define U16_MAX rather than value for limit.
- Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
- Drop trivial dead code.
* kionix,kx022a
- Drop unused structure element.
* linear,ltc2983
- Reorganize bindings doc to enable unevaluatedProperties to be set
in one place for all child nodes.
- Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
- Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
- Missing static
* measurement-computing,cio-dac
- Fix wrong part name in comments.
- Migrate to regmap.
- Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
- Remove a check that can never fail.
* renesas,rcar-gyroadc
- DT binding documentation improvements.
- Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
- Drop docs for a structure element that doesn't exist.
* semtech,sx9500
- Drop ACPI_PTR() and of_match_ptr() protections that just complicate
the code / block some firmware registration types that would otherwise
work.
* sensiron,sps30
- Comment formatting tidy up.
* st,sensors
- Drop duplicate text in DT binding.
* st,stm32-adc
- Add some missing static markings.
* ti,ads1100
- Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
- General code cleanup / minor refactoring for better readabilty of code.
- Switch from boolean value to mask for adc_en2 field to avoid hard coding
a mask that will be different in AXP192
* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
MAINTAINERS: Add ROHM BU27034
iio: light: ROHM BU27034 Ambient Light Sensor
dt-bindings: iio: light: Support ROHM BU27034
MAINTAINERS: Add IIO gain-time-scale helpers
iio: light: Add gain-time-scale helpers
doc: Make sysfs-bus-iio doc more exact
iio: dac: set variable max5522_channels storage-class-specifier to static
dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
iio: addac: stx104: Migrate to the regmap API
iio: addac: stx104: Improve indentation in stx104_write_raw()
iio: addac: stx104: Use define rather than hardcoded limit for write val
iio: addac: stx104: Fix race condition when converting analog-to-digital
iio: addac: stx104: Fix race condition for stx104_write_raw()
dt-bindings: iio: st-sensors: Fix repeated text
staging: iio: resolver: ads1210: fix config mode
iio: adc: ti-ads1100: fix error code in probe()
iio: accel: add support for IIS328DQ variant
dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
...
|
|
Add new WQE type: FLOW_TBL_ACCESS, which will be used for
writing modify header arguments.
This type has specific control segment and special data segment.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add enum value for modify-header argument object and mlx5_bits
for the related capabilities.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Create a new profile for SFs in order to disable the command cache.
Each function command cache consumes ~500KB of memory, when using a
large number of SFs this savings is notable on memory constarined
systems.
Use a new profile to provide for future differences between SFs and PFs.
The mr_cache not used for non-PF functions, so it is excluded from the
new profile.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add the required hardware definitions to mlx5_ifc: fdb_uplink_hairpin,
fdb_multi_path_any_table_limit_regc, fdb_multi_path_any_table.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
As per Linus's suggestion
(https://lore.kernel.org/r/CAHk-=whefxRGyNGzCzG6BVeM=5vnvgb-XhSeFJVxJyAxAF8XRA@mail.gmail.com),
use WARN_ON_ONCE instead of WARN_ON. This barely adds any extra
overhead, and it makes it so that if any of these ever becomes reachable
(they shouldn't, but that's the point), the logs can't be flooded.
Link: https://lore.kernel.org/r/20230406181542.38894-1-ebiggers@kernel.org
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
NFSv3 includes pre/post wcc attributes which allow the client to
determine if all changes to the file have been made by the client
itself, or if any might have been made by some other client.
If there are gaps in the pre/post ctime sequence it must be assumed that
some other client changed the file in that gap and the local cache must
be suspect. The next time the file is opened the cache should be
invalidated.
Since Commit 1c341b777501 ("NFS: Add deferred cache invalidation for
close-to-open consistency violations") in linux 5.3 the Linux client has
been triggering this invalidation. The chunk in nfs_update_inode() in
particularly triggers.
Unfortunately Linux NFS assumes that all replies will be processed in
the order sent, and will arrive in the order processed. This is not
true in general. Consequently Linux NFS might ignore the wcc info in a
WRITE reply because the reply is in response to a WRITE that was sent
before some other request for which a reply has already been seen. This
is detected by Linux using the gencount tests in nfs_inode_attr_cmp().
Also, when the gencount tests pass it is still possible that the request
were processed on the server in a different order, and a gap seen in
the ctime sequence might be filled in by a subsequent reply, so gaps
should not immediately trigger delayed invalidation.
The net result is that writing to a server and then reading the file
back can result in going to the server for the read rather than serving
it from cache - all because a couple of replies arrived out-of-order.
This is a performance regression over kernels before 5.3, though the
change in 5.3 is a correctness improvement.
This has been seen with Linux writing to a Netapp server which
occasionally re-orders requests. In testing the majority of requests
were in-order, but a few (maybe 2 or three at a time) could be
re-ordered.
This patch addresses the problem by recording any gaps seen in the
pre/post ctime sequence and not triggering invalidation until either
there are too many gaps to fit in the table, or until there are no more
active writes and the remaining gaps cannot be resolved.
We allocate a table of 16 gaps on demand. If the allocation fails we
revert to current behaviour which is of little cost as we are unlikely
to be able to cache the writes anyway.
In the table we store "start->end" pair when iversion is updated and
"end<-start" pairs pre/post pairs reported by the server. Usually these
exactly cancel out and so nothing is stored. When there are
out-of-order replies we do store gaps and these will eventually be
cancelled against later replies when this client is the only writer.
If the final write is out-of-order there may be one gap remaining when
the file is closed. This will be noticed and if there is precisely on
gap and if the iversion can be advanced to match it, then we do so.
This patch makes no attempt to handle directories correctly. The same
problem potentially exists in the out-of-order replies to create/unlink
requests can cause future lookup requires to be sent to the server
unnecessarily. A similar scheme using the same primitives could be used
to notice and handle out-of-order replies.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Provide pci_msix_can_alloc_dyn() stub when CONFIG_PCI_MSI unset to
avoid build errors (Reinette Chatre)
- Quirk AMD XHCI controller that loses MSI-X state in D3hot to avoid
broken USB after hotplug or suspend/resume (Basavaraj Natikar)
- Fix use-after-free in pci_bus_release_domain_nr() (Rob Herring)
* tag 'pci-v6.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix use-after-free in pci_bus_release_domain_nr()
x86/PCI: Add quirk for AMD XHCI controller that loses MSI-X state in D3hot
PCI/MSI: Provide missing stub for pci_msix_can_alloc_dyn()
|
|
The NFS specific trace points are no longer needed as tracing is well
covered by netfs and fscache.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The old NFSIOS_FSCACHE counters are no longer accurate or useful with
the conversion to the new netfs API. The new API does not have a page
based interface, and so the counters in nfs_stat_fscachecounters are
no longer obtainable. The new netfs the API has extensive statistics
inside /proc/fs/fscache/stats so we no longer need NFS specific fscache
stats.
Note this also removes the 'fsc:' line from /proc/self/mountstats so
it will be a user-visible change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Convert the NFS buffered read code paths to corresponding netfs APIs,
but only when fscache is configured and enabled.
The netfs API defines struct netfs_request_ops which must be filled
in by the network filesystem. For NFS, we only need to define 5 of
the functions, the main one being the issue_read() function.
The issue_read() function is called by the netfs layer when a read
cannot be fulfilled locally, and must be sent to the server (either
the cache is not active, or it is active but the data is not available).
Once the read from the server is complete, netfs requires a call to
netfs_subreq_terminated() which conveys either how many bytes were read
successfully, or an error. Note that issue_read() is called with a
structure, netfs_io_subrequest, which defines the IO requested, and
contains a start and a length (both in bytes), and assumes the underlying
netfs will return a either an error on the whole region, or the number
of bytes successfully read.
The NFS IO path is page based and the main APIs are the pgio APIs defined
in pagelist.c. For the pgio APIs, there is no way for the caller to
know how many RPCs will be sent and how the pages will be broken up
into underlying RPCs, each of which will have their own completion and
return code. In contrast, netfs is subrequest based, a single
subrequest may contain multiple pages, and a single subrequest is
initiated with issue_read() and terminated with netfs_subreq_terminated().
Thus, to utilze the netfs APIs, NFS needs some way to accommodate
the netfs API requirement on the single response to the whole
subrequest, while also minimizing disruptive changes to the NFS
pgio layer.
The approach taken with this patch is to allocate a small structure
for each nfs_netfs_issue_read() call, store the final error and number
of bytes successfully transferred in the structure, and update these values
as each RPC completes. The refcount on the structure is used as a marker
for the last RPC completion, is incremented in nfs_netfs_read_initiate(),
and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header
contains a valid pointer to the data. On the final put (which signals
the final outstanding RPC is complete) in nfs_netfs_read_completion(),
call netfs_subreq_terminated() with either the final error value (if
one or more READs complete with an error) or the number of bytes
successfully transferred (if all RPCs complete successfully). Note
that when all RPCs complete successfully, the number of bytes transferred
is capped to the length of the subrequest. Capping the transferred length
to the subrequest length prevents "Subreq overread" warnings from netfs.
This is due to the "aligned_len" in nfs_pageio_add_page(), and the
corner case where NFS requests a full page at the end of the file,
even when i_size reflects only a partial page (NFS overread).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
As first steps for support of the netfs library when NFS_FSCACHE is
configured, add NETFS_SUPPORT to Kconfig and add the required netfs_inode
into struct nfs_inode.
Using netfs requires we move the VFS inode structure to be stored
inside struct netfs_inode, along with the fscache_cookie.
Thus, if NFS_FSCACHE is configured, place netfs_inode inside an
anonymous union so the vfs_inode memory is the same and we do
not need to modify other non-fscache areas of NFS.
In addition, inside the NFS fscache code, use the new helpers,
netfs_inode() and netfs_i_cookie() helpers, and remove our own
helper, nfs_i_fscache().
Later patches will convert NFS fscache to fully use netfs.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Eliminate duplicate boilerplate code for simple modules that contain
a single DM target driver without any additional setup code.
Add a new module_dm() macro, which replaces the module_init() and
module_exit() with template functions that call dm_register_target()
and dm_unregister_target() respectively.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Simplify internal verifier log API down to bpf_vlog_init() and
bpf_vlog_finalize(). The former handles input arguments validation in
one place and makes it easier to change it. The latter subsumes -ENOSPC
(truncation) and -EFAULT handling and simplifies both caller's code
(bpf_check() and btf_parse()).
For btf_parse(), this patch also makes sure that verifier log
finalization happens even if there is some error condition during BTF
verification process prior to normal finalization step.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
|
|
Add output-only log_true_size and btf_log_true_size field to
BPF_PROG_LOAD and BPF_BTF_LOAD commands, respectively. It will return
the size of log buffer necessary to fit in all the log contents at
specified log_level. This is very useful for BPF loader libraries like
libbpf to be able to size log buffer correctly, but could be used by
users directly, if necessary, as well.
This patch plumbs all this through the code, taking into account actual
bpf_attr size provided by user to determine if these new fields are
expected by users. And if they are, set them from kernel on return.
We refactory btf_parse() function to accommodate this, moving attr and
uattr handling inside it. The rest is very straightforward code, which
is split from the logging accounting changes in the previous patch to
make it simpler to review logic vs UAPI changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-13-andrii@kernel.org
|
|
Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos
as *logical* log position. This means that we can go beyond physical log
buffer size now and be able to tell what log buffer size should be to
fit entire log contents without -ENOSPC.
To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting
logic of not vsnprintf()'ing further log content once we filled up
user-provided buffer, which is done by bpf_verifier_log_needed() checks.
We modify these checks to always keep going if log->level is non-zero
(i.e., log is requested), even if log->ubuf was NULL'ed out due to
copying data to user-space, or if entire log buffer is physically full.
We adopt bpf_verifier_vlog() routine to work correctly with
log->ubuf == NULL condition, performing log formatting into temporary
kernel buffer, doing all the necessary accounting, but just avoiding
copying data out if buffer is full or NULL'ed out.
With these changes, it's now possible to do this sort of determination of
log contents size in both BPF_LOG_FIXED and default rolling log mode.
We need to keep in mind bpf_vlog_reset(), though, which shrinks log
contents after successful verification of a particular code path. This
log reset means that log->end_pos isn't always increasing, so to return
back to users what should be the log buffer size to fit all log content
without causing -ENOSPC even in the presence of log resetting, we need
to keep maximum over "lifetime" of logging. We do this accounting in
bpf_vlog_update_len_max() helper.
A related and subtle aspect is that with this logical log->end_pos even in
BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset
it back with bpf_vlog_reset() to a position inside user-supplied
log_buf. In such situation we still want to properly maintain
terminating zero. We will eventually return -ENOSPC even if final log
buffer is small (we detect this through log->len_max check). This
behavior is simpler to reason about and is consistent with current
behavior of verifier log. Handling of this required a small addition to
bpf_vlog_reset() logic to avoid doing put_user() beyond physical log
buffer dimensions.
Another issue to keep in mind is that we limit log buffer size to 32-bit
value and keep such log length as u32, but theoretically verifier could
produce huge log stretching beyond 4GB. Instead of keeping (and later
returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes
it impossible to specify log buffer size bigger than 4GB anyways, so we
don't really loose anything here and keep everything consistently 32-bit
in UAPI. This property will be utilized in next patch.
Doing the same determination of maximum log buffer for rolling mode is
trivial, as log->end_pos and log->start_pos are already logical
positions, so there is nothing new there.
These changes do incidentally fix one small issue with previous logging
logic. Previously, if use provided log buffer of size N, and actual log
output was exactly N-1 bytes + terminating \0, kernel logic coun't
distinguish this condition from log truncation scenario which would end
up with truncated log contents of N-1 bytes + terminating \0 as well.
But now with log->end_pos being logical position that could go beyond
actual log buffer size, we can distinguish these two conditions, which
we do in this patch. This plays nicely with returning log_size_actual
(implemented in UAPI in the next patch), as we can now guarantee that if
user takes such log_size_actual and provides log buffer of that exact
size, they will not get -ENOSPC in return.
All in all, all these changes do conceptually unify fixed and rolling
log modes much better, and allow a nice feature requested by users:
knowing what should be the size of the buffer to avoid -ENOSPC.
We'll plumb this through the UAPI and the code in the next patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
|
|
Currently, if user-supplied log buffer to collect BPF verifier log turns
out to be too small to contain full log, bpf() syscall returns -ENOSPC,
fails BPF program verification/load, and preserves first N-1 bytes of
the verifier log (where N is the size of user-supplied buffer).
This is problematic in a bunch of common scenarios, especially when
working with real-world BPF programs that tend to be pretty complex as
far as verification goes and require big log buffers. Typically, it's
when debugging tricky cases at log level 2 (verbose). Also, when BPF program
is successfully validated, log level 2 is the only way to actually see
verifier state progression and all the important details.
Even with log level 1, it's possible to get -ENOSPC even if the final
verifier log fits in log buffer, if there is a code path that's deep
enough to fill up entire log, even if normally it would be reset later
on (there is a logic to chop off successfully validated portions of BPF
verifier log).
In short, it's not always possible to pre-size log buffer. Also, what's
worse, in practice, the end of the log most often is way more important
than the beginning, but verifier stops emitting log as soon as initial
log buffer is filled up.
This patch switches BPF verifier log behavior to effectively behave as
rotating log. That is, if user-supplied log buffer turns out to be too
short, verifier will keep overwriting previously written log,
effectively treating user's log buffer as a ring buffer. -ENOSPC is
still going to be returned at the end, to notify user that log contents
was truncated, but the important last N bytes of the log would be
returned, which might be all that user really needs. This consistent
-ENOSPC behavior, regardless of rotating or fixed log behavior, allows
to prevent backwards compatibility breakage. The only user-visible
change is which portion of verifier log user ends up seeing *if buffer
is too small*. Given contents of verifier log itself is not an ABI,
there is no breakage due to this behavior change. Specialized tools that
rely on specific contents of verifier log in -ENOSPC scenario are
expected to be easily adapted to accommodate old and new behaviors.
Importantly, though, to preserve good user experience and not require
every user-space application to adopt to this new behavior, before
exiting to user-space verifier will rotate log (in place) to make it
start at the very beginning of user buffer as a continuous
zero-terminated string. The contents will be a chopped off N-1 last
bytes of full verifier log, of course.
Given beginning of log is sometimes important as well, we add
BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows
tools like veristat to request first part of verifier log, if necessary.
BPF_LOG_FIXED flag is also a simple and straightforward way to check if
BPF verifier supports rotating behavior.
On the implementation side, conceptually, it's all simple. We maintain
64-bit logical start and end positions. If we need to truncate the log,
start position will be adjusted accordingly to lag end position by
N bytes. We then use those logical positions to calculate their matching
actual positions in user buffer and handle wrap around the end of the
buffer properly. Finally, right before returning from bpf_check(), we
rotate user log buffer contents in-place as necessary, to make log
contents contiguous. See comments in relevant functions for details.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
|
|
kernel/bpf/verifier.c file is large and growing larger all the time. So
it's good to start splitting off more or less self-contained parts into
separate files to keep source code size (somewhat) somewhat under
control.
This patch is a one step in this direction, moving some of BPF verifier log
routines into a separate kernel/bpf/log.c. Right now it's most low-level
and isolated routines to append data to log, reset log to previous
position, etc. Eventually we could probably move verifier state
printing logic here as well, but this patch doesn't attempt to do that
yet.
Subsequent patches will add more logic to verifier log management, so
having basics in a separate file will make sure verifier.c doesn't grow
more with new changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
|
|
Drivers call netdev_tx_completed_queue() right before
netif_txq_maybe_wake(). If BQL is enabled netdev_tx_completed_queue()
should issue a memory barrier, so we can depend on that separating
the stop check from the consumer index update, instead of adding
another barrier in netif_txq_maybe_wake().
This matters more than the barriers on the xmit path, because
the wake condition is almost always true. So we issue the
consumer side barrier often.
Wrap netdev_tx_completed_queue() in a local helper to issue
the barrier even if BQL is disabled. Keep the same semantics
as netdev_tx_completed_queue() (barrier only if bytes != 0)
to make it clear that the barrier is conditional.
Plus since macro gets pkt/byte counts as arguments now -
we can skip waking if there were no packets completed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A lot of drivers follow the same scheme to stop / start queues
without introducing locks between xmit and NAPI tx completions.
I'm guessing they all copy'n'paste each other's code.
The original code dates back all the way to e1000 and Linux 2.6.19.
Smaller drivers shy away from the scheme and introduce a lock
which may cause deadlocks in netpoll.
Provide macros which encapsulate the necessary logic.
The macros do not prevent false wake ups, the extra barrier
required to close that race is not worth it. See discussion in:
https://lore.kernel.org/all/c39312a2-4537-14b4-270c-9fe1fbb91e89@gmail.com/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As of_device_(add|register|unregister) functions work on struct
platform_device, they should be declared in of_platform.h instead.
This move is transparent for now as both headers include each other.
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-2-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Sparc is the only place devtree_lock is used outside of drivers/of/.
Move the devtree_lock declaration into of_private.h and Sparc's prom.h
so pulling in spinlock.h to of.h can be avoided for everything besides
Sparc.
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-1-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Use common implementation of file type conversion helpers.
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Some light sensors can adjust both the HW-gain and integration time.
There are cases where adjusting the integration time has similar impact
to the scale of the reported values as gain setting has.
IIO users do typically expect to handle scale by a single writable 'scale'
entry. Driver should then adjust the gain/time accordingly.
It however is difficult for a driver to know whether it should change
gain or integration time to meet the requested scale. Usually it is
preferred to have longer integration time which usually improves
accuracy, but there may be use-cases where long measurement times can be
an issue. Thus it can be preferable to allow also changing the
integration time - but mitigate the scale impact by also changing the gain
underneath. Eg, if integration time change doubles the measured values,
the driver can reduce the HW-gain to half.
The theory of the computations of gain-time-scale is simple. However,
some people (undersigned) got that implemented wrong for more than once.
Add some gain-time-scale helpers in order to not dublicate errors in all
drivers needing these computations.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/268d418e7cffcdaa2ece6738478bbc57692c213e.1680263956.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We need the USB fixes in here for testing, and this resolves two merge
conflicts, one pointed out by linux-next:
drivers/usb/dwc3/dwc3-pci.c
drivers/usb/host/xhci-pci.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the tty/serial fixes in here for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need it here to apply other char/misc driver changes to.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull in pre-requisite patches from Guenter Roeck to constify
pointers to hwmon_channel_info.
* 'hwmon-const' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: constify pointers to hwmon_channel_info
Link: https://lore.kernel.org/all/3a0391e7-21f6-432a-9872-329e298e1582@roeck-us.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (cxl) fixes from Dan Williams:
"Several fixes for driver startup regressions that landed during the
merge window as well as some older bugs.
The regressions were due to a lack of testing with what the CXL
specification calls Restricted CXL Host (RCH) topologies compared to
the testing with Virtual Host (VH) CXL topologies. A VH topology is
typical PCIe while RCH topologies map CXL endpoints as Root Complex
Integrated endpoints. The impact is some driver crashes on startup.
This merge window also added compatibility for range registers (the
mechanism that CXL 1.1 defined for mapping memory) to treat them like
HDM decoders (the mechanism that CXL 2.0 defined for mapping
Host-managed Device Memory). That work collided with the new region
enumeration code that was tested with CXL 2.0 setups, and fails with
crashes at startup.
Lastly, the DOE (Data Object Exchange) implementation for retrieving
an ACPI-like data table from CXL devices is being reworked for v6.4.
Several fixes fell out of that work that are suitable for v6.3.
All of this has been in linux-next for a while, and all reported
issues [1] have been addressed.
Summary:
- Fix several issues with region enumeration in RCH topologies that
can trigger crashes on driver startup or shutdown.
- Fix CXL DVSEC range register compatibility versus region
enumeration that leads to startup crashes
- Fix CDAT endiannes handling
- Fix multiple buffer handling boundary conditions
- Fix Data Object Exchange (DOE) workqueue usage vs
CONFIG_DEBUG_OBJECTS warn splats"
Link: http://lore.kernel.org/r/20230405075704.33de8121@canb.auug.org.au [1]
* tag 'cxl-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/hdm: Extend DVSEC range register emulation for region enumeration
cxl/hdm: Limit emulation to the number of range registers
cxl/region: Move coherence tracking into cxl_region_attach()
cxl/region: Fix region setup/teardown for RCDs
cxl/port: Fix find_cxl_root() for RCDs and simplify it
cxl/hdm: Skip emulation when driver manages mem_enable
cxl/hdm: Fix double allocation of @cxlhdm
PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y
PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y
cxl/pci: Handle excessive CDAT length
cxl/pci: Handle truncated CDAT entries
cxl/pci: Handle truncated CDAT header
cxl/pci: Fix CDAT retrieval on big endian
|
|
There was a sort of rush surrounding commit 88c0a6b503b7 ("net: create a
netdev notifier for DSA to reject PTP on DSA master"), due to a desire
to convert DSA's attempt to deny TX timestamping on a DSA master to
something that doesn't block the kernel-wide API conversion from
ndo_eth_ioctl() to ndo_hwtstamp_set().
What was required was a mechanism that did not depend on ndo_eth_ioctl(),
and what was provided was a mechanism that did not depend on
ndo_eth_ioctl(), while at the same time introducing something that
wasn't absolutely necessary - a new netdev notifier.
There have been objections from Jakub Kicinski that using notifiers in
general when they are not absolutely necessary creates complications to
the control flow and difficulties to maintainers who look at the code.
So there is a desire to not use notifiers.
In addition to that, the notifier chain gets called even if there is no
DSA in the system and no one is interested in applying any restriction.
Take the model of udp_tunnel_nic_ops and introduce a stub mechanism,
through which net/core/dev_ioctl.c can call into DSA even when
CONFIG_NET_DSA=m.
Compared to the code that existed prior to the notifier conversion, aka
what was added in commits:
- 4cfab3566710 ("net: dsa: Add wrappers for overloaded ndo_ops")
- 3369afba1e46 ("net: Call into DSA netdevice_ops wrappers")
this is different because we are not overloading any struct
net_device_ops of the DSA master anymore, but rather, we are exposing a
rather specific functionality which is orthogonal to which API is used
to enable it - ndo_eth_ioctl() or ndo_hwtstamp_set().
Also, what is similar is that both approaches use function pointers to
get from built-in code to DSA.
There is no point in replicating the function pointers towards
__dsa_master_hwtstamp_validate() once for every CPU port (dev->dsa_ptr).
Instead, it is sufficient to introduce a singleton struct dsa_stubs,
built into the kernel, which contains a single function pointer to
__dsa_master_hwtstamp_validate().
I find this approach preferable to what we had originally, because
dev->dsa_ptr->netdev_ops->ndo_do_ioctl() used to require going through
struct dsa_port (dev->dsa_ptr), and so, this was incompatible with any
attempts to add any data encapsulation and hide DSA data structures from
the outside world.
Link: https://lore.kernel.org/netdev/20230403083019.120b72fd@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
arch_kexec_kernel_image_load() only calls kexec_image_load_default(), and
there are no arch-specific implementations.
Remove the unnecessary arch_kexec_kernel_image_load() and make
kexec_image_load_default() static.
No functional change intended.
Link: https://lkml.kernel.org/r/20230307224416.907040-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kexec: Remove unnecessary arch hook", v2.
There are no arch-specific things in arch_kexec_kernel_image_load(), so
remove it and just use the generic version.
This patch (of 2):
The x86 implementation of arch_kexec_kernel_image_load() is functionally
identical to the generic arch_kexec_kernel_image_load():
arch_kexec_kernel_image_load # x86
if (!image->fops || !image->fops->load)
return ERR_PTR(-ENOEXEC);
return image->fops->load(image, image->kernel_buf, ...)
arch_kexec_kernel_image_load # generic
kexec_image_load_default
if (!image->fops || !image->fops->load)
return ERR_PTR(-ENOEXEC);
return image->fops->load(image, image->kernel_buf, ...)
Remove the x86-specific version and use the generic
arch_kexec_kernel_image_load(). No functional change intended.
Link: https://lkml.kernel.org/r/20230307224416.907040-1-helgaas@kernel.org
Link: https://lkml.kernel.org/r/20230307224416.907040-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For the sake of cleaning up the kernel.h split the hexadecimal related
helpers to own header called 'hex.h'.
Link: https://lkml.kernel.org/r/20230323155029.40000-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"28 hotfixes.
23 are cc:stable and the other five address issues which were
introduced during this merge cycle.
20 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: fix a potential concurrency bug in RCU mode
maple_tree: fix get wrong data_end in mtree_lookup_walk()
mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
nilfs2: fix sysfs interface lifetime
mm: take a page reference when removing device exclusive entries
mm: vmalloc: avoid warn_alloc noise caused by fatal signal
nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field
nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()
zsmalloc: document freeable stats
zsmalloc: document new fullness grouping
fsdax: force clear dirty mark if CoW
mm/hugetlb: fix uffd wr-protection for CoW optimization path
mm: enable maple tree RCU mode by default
maple_tree: add RCU lock checking to rcu callback functions
maple_tree: add smp_rmb() to dead node detection
maple_tree: fix write memory barrier of nodes once dead for RCU mode
maple_tree: remove extra smp_wmb() from mas_dead_leaves()
maple_tree: fix freeing of nodes in rcu mode
maple_tree: detect dead nodes in mas_start()
maple_tree: be more cautious about dead nodes
...
|
|
The T241 platform suffers from the T241-FABRIC-4 erratum which causes
unexpected behavior in the GIC when multiple transactions are received
simultaneously from different sources. This hardware issue impacts
NVIDIA server platforms that use more than two T241 chips
interconnected. Each chip has support for 320 {E}SPIs.
This issue occurs when multiple packets from different GICs are
incorrectly interleaved at the target chip. The erratum text below
specifies exactly what can cause multiple transfer packets susceptible
to interleaving and GIC state corruption. GIC state corruption can
lead to a range of problems, including kernel panics, and unexpected
behavior.
>From the erratum text:
"In some cases, inter-socket AXI4 Stream packets with multiple
transfers, may be interleaved by the fabric when presented to ARM
Generic Interrupt Controller. GIC expects all transfers of a packet
to be delivered without any interleaving.
The following GICv3 commands may result in multiple transfer packets
over inter-socket AXI4 Stream interface:
- Register reads from GICD_I* and GICD_N*
- Register writes to 64-bit GICD registers other than GICD_IROUTERn*
- ITS command MOVALL
Multiple commands in GICv4+ utilize multiple transfer packets,
including VMOVP, VMOVI, VMAPP, and 64-bit register accesses."
This issue impacts system configurations with more than 2 sockets,
that require multi-transfer packets to be sent over inter-socket
AXI4 Stream interface between GIC instances on different sockets.
GICv4 cannot be supported. GICv3 SW model can only be supported
with the workaround. Single and Dual socket configurations are not
impacted by this issue and support GICv3 and GICv4."
Link: https://developer.nvidia.com/docs/t241-fabric-4/nvidia-t241-fabric-4-errata.pdf
Writing to the chip alias region of the GICD_In{E} registers except
GICD_ICENABLERn has an equivalent effect as writing to the global
distributor. The SPI interrupt deactivate path is not impacted by
the erratum.
To fix this problem, implement a workaround that ensures read accesses
to the GICD_In{E} registers are directed to the chip that owns the
SPI, and disable GICv4.x features. To simplify code changes, the
gic_configure_irq() function uses the same alias region for both read
and write operations to GICD_ICFGR.
Co-developed-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com> (for SMCCC/SOC ID bits)
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230319024314.3540573-2-sdonthineni@nvidia.com
|
|
With the last non-OF, non-ACPI user of the GIC being removed in
e73307b9ebc4 ("ARM: cns3xxx: remove entire platform"), we can finally
drop the entry point and do some minor cleanup.
We also make the driver depend on CONFIG_OF, which is required
even when CONFIG_ACPI is selected.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230315130218.3212033-1-maz@kernel.org
|
|
The functions thermal_of_zone_register() and
thermal_of_zone_unregister() are no longer needed from the drivers as
the devm_ variant is always used.
Make them static in the C file and remove their declaration from thermal.h
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230404075138.2914680-2-daniel.lezcano@linaro.org
|
|
Similar to the existing reg_downshift mechanism, that is used to
translate register addresses on busses that have a smaller address
stride, it's also possible to want to upshift register addresses.
Such a case was encountered when network PHYs and PCS that usually sit
on a MDIO bus (16-bits register with a stride of 1) are integrated
directly as memory-mapped devices. Here, the same register layout
defined in 802.3 is used, but the register now have a larger stride.
Introduce a mechanism to also allow upshifting register addresses.
Re-purpose reg_downshift into a more generic, signed reg_shift, whose
sign indicates the direction of the shift. To avoid confusion, also
introduce macros to explicitly indicate if we want to downshift or
upshift.
For bisectability, change any use of reg_downshift to use reg_shift.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230407152604.105467-1-maxime.chevallier@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allows drivers to make them also const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since the cpufreq core directly uses freq_table, for cpufreq drivers
that set their target_index() callback, make it mandatory for them to
set the same.
Since this is set per policy and normally from policy->init(), do this
from cpufreq_table_validate_and_sort() which gets called right after
->init().
Reported-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove struct thermal_bind_params because no one is using it for thermal
binding now.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230330104526.3196-1-rui.zhang@intel.com
|
|
WED version 2 (on MT7986 and later) can offload flows originating from
wireless devices.
In order to make that work, ndo_setup_tc needs to be implemented on the
netdevs. This adds the required code to offload flows coming in from WED,
while keeping track of the incoming wed index used for selecting the
correct PPE device.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dma_default_coherent was decleared unconditionally at kernel/dma/mapping.c
but only decleared when any of non-coherent options is enabled in
dma-map-ops.h.
Guard the declaration in mapping.c with non-coherent options and provide
a fallback definition.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
