| Age | Commit message (Collapse) | Author |
|---|
|
If we add one more callback, we can have common bank switch sequences
between old and new hardware: the only difference is where the CMDSYNC
register is located.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The bus start/stop sequences can be reused between platforms if we add
a couple of new callbacks. In following patches the code will be moved to
a shared file.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
IP tunnels can apparently update dev->needed_headroom
in their xmit path.
This patch takes care of three tunnels xmit, and also the
core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA()
helpers.
More changes might be needed for completeness.
BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit
read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1:
ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:444 [inline]
ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126
iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
write to 0xffff88815b9da0ec of 2 bytes by task 2379 on cpu 0:
ip_tunnel_xmit+0x1294/0x1730 net/ipv4/ip_tunnel.c:804
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661
__netdev_start_xmit include/linux/netdevice.h:4881 [inline]
netdev_start_xmit include/linux/netdevice.h:4895 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596
__dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3051 [inline]
neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623
neigh_output include/net/neighbour.h:546 [inline]
ip6_finish_output2+0x9bc/0xc50 net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x39a/0x4e0 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:444 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
mld_sendpack+0x438/0x6a0 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x519/0x7b0 net/ipv6/mcast.c:2653
process_one_work+0x3e6/0x750 kernel/workqueue.c:2390
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2537
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x0dd4 -> 0x0e14
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5fa354-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Workqueue: mld mld_ifc_work
Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230310191109.2384387-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow histogram values to have modifies. They can cause a NULL
pointer dereference if they do.
- Warn if hist_field_name() is passed a NULL. Prevent the NULL pointer
dereference mentioned above.
- Fix invalid address look up race in lookup_rec()
- Define ftrace_stub_graph conditionally to prevent linker errors
- Always check if RCU is watching at all tracepoint locations
* tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make tracepoint lockdep check actually test something
ftrace,kcfi: Define ftrace_stub_graph conditionally
ftrace: Fix invalid address access in lookup_rec() when index is 0
tracing: Check field value in hist_field_name()
tracing: Do not let histogram values have some modifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of clk driver fixes, and a couple OF clk patches to fix
regressions seen in the last few weeks. The fwnode patch broke the
build for one driver that isn't always compiled, so I waited over the
weekend to be certain no more build issues came up.
- Mark the firmware node (fwnode) that matches the compatible in
CLK_OF_DECLARE() as initialized to fix a regression on u8500 SoCs
after fw_devlink stopped checking parent nodes in
of_link_to_phandle()
- Remove a couple MODULE_LICENSE macros in non-modules
- Update the maintainers file for Microchip clk drivers
- Use 'select' instead of 'depend on' for the REGMAP config to fix
Kconfig issues
- Use div_u64() for portable 64-bit division in K210 clk driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Avoid invalid function names in CLK_OF_DECLARE()
clk: k210: remove an implicit 64-bit division
MAINTAINERS: add missing clock driver coverage for Microchip FPGAs
clk: HI655X: select REGMAP instead of depending on it
kbuild, clk: remove MODULE_LICENSE in non-modules
kbuild, clk: bcm2835: remove MODULE_LICENSE in non-modules
clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro
|
|
skb_mark_for_recycle() is guarded with CONFIG_PAGE_POOL, this creates
unneeded complication when using it in the generic code. For now, it's
only used in the drivers always selecting Page Pool, so this works.
Move the guards so that preprocessor will cut out only the operation
itself and the function will still be a noop on !PAGE_POOL systems,
but available there as well.
No functional changes.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303020342.Wi2PRFFH-lkp@intel.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-3-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A while ago where the trace events had the following:
rcu_read_lock_sched_notrace();
rcu_dereference_sched(...);
rcu_read_unlock_sched_notrace();
If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).
But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.
The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).
Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.
Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Xilinx IPI message buffers allows 32-byte data transfer.
Fix documentation that says 12 bytes
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-4-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Commit 6930bcbfb6ce dropped the setting of the file_lock range when
decoding a nlm_lock off the wire. This causes the client side grant
callback to miss matching blocks and reject the lock, only to rerequest
it 30s later.
Add a helper function to set the file_lock range from the start and end
values that the protocol uses, and have the nlm_lock decoder call that to
set up the file_lock args properly.
Fixes: 6930bcbfb6ce ("lockd: detect and reject lock arguments that overflow")
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org #6.0
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit 26fed4ac4eab ("block: flush plug based on hardware and software
queue order") changed flushing of plug list to submit requests one
device at a time. However while doing that it also started using
list_add_tail() instead of list_add() used previously thus effectively
submitting requests in reverse order. Also when forming a rq_list with
remaining requests (in case two or more devices are used), we
effectively reverse the ordering of the plug list for each device we
process. Submitting requests in reverse order has negative impact on
performance for rotational disks (when BFQ is not in use). We observe
10-25% regression in random 4k write throughput, as well as ~20%
regression in MariaDB OLTP benchmark on rotational storage on btrfs
filesystem.
Fix the problem by preserving ordering of the plug list when inserting
requests into the queuelist as well as by appending to requeue_list
instead of prepending to it.
Fixes: 26fed4ac4eab ("block: flush plug based on hardware and software queue order")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230313093002.11756-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is part of the low-level API and should not be exposed to
top-level Crypto API users.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move all stat code specific to rng into the rng code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move all stat code specific to skcipher into the skcipher code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move all stat code specific to kpp into the kpp code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move all stat code specific to acomp into the acomp code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move all stat code specific to hash into the hash code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move all stat code specific to akcipher into the akcipher code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move all stat code specific to aead into the aead code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com
|
|
From QUP HW Version 3.10 and above the Tx and Rx
fifo depth bits are increased to 23:16 bits from
21:16 bits in SE_HW_PARAM registers accomodating
256bytes of fifo depth.
Updated geni_se_get_tx_fifo_depth and
geni_se_get_rx_fifo_depth to retrieve right fifo
depth based on QUP HW version.
Signed-off-by: Visweswara Tanuku <quic_vtanuku@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215050528.9507-1-quic_vtanuku@quicinc.com
|
|
When a local kptr is stashed in a map and freed when the map goes away,
currently an error like the below appears:
[ 39.195695] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u32:15/2875
[ 39.196549] caller is bpf_mem_free+0x56/0xc0
[ 39.196958] CPU: 15 PID: 2875 Comm: kworker/u32:15 Tainted: G O 6.2.0-13016-g22df776a9a86 #4477
[ 39.197897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 39.198949] Workqueue: events_unbound bpf_map_free_deferred
[ 39.199470] Call Trace:
[ 39.199703] <TASK>
[ 39.199911] dump_stack_lvl+0x60/0x70
[ 39.200267] check_preemption_disabled+0xbf/0xe0
[ 39.200704] bpf_mem_free+0x56/0xc0
[ 39.201032] ? bpf_obj_new_impl+0xa0/0xa0
[ 39.201430] bpf_obj_free_fields+0x1cd/0x200
[ 39.201838] array_map_free+0xad/0x220
[ 39.202193] ? finish_task_switch+0xe5/0x3c0
[ 39.202614] bpf_map_free_deferred+0xea/0x210
[ 39.203006] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 39.203460] process_one_work+0x64f/0xbe0
[ 39.203822] ? pwq_dec_nr_in_flight+0x110/0x110
[ 39.204264] ? do_raw_spin_lock+0x107/0x1c0
[ 39.204662] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 39.205107] worker_thread+0x74/0x7a0
[ 39.205451] ? process_one_work+0xbe0/0xbe0
[ 39.205818] kthread+0x171/0x1a0
[ 39.206111] ? kthread_complete_and_exit+0x20/0x20
[ 39.206552] ret_from_fork+0x1f/0x30
[ 39.206886] </TASK>
This happens because the call to __bpf_obj_drop_impl I added in the patch
adding support for stashing local kptrs doesn't disable migration. Prior
to that patch, __bpf_obj_drop_impl logic only ran when called by a BPF
progarm, whereas now it can be called from map free path, so it's
necessary to explicitly disable migration.
Also, refactor a bit to just call __bpf_obj_drop_impl directly instead
of bothering w/ dtor union and setting pointer-to-obj_drop.
Fixes: c8e187540914 ("bpf: Support __kptr to local kptrs")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230313214641.3731908-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 732ea9db9d8a ("efi: libstub: Move screen_info handling to common
code") reorganized the earlycon handling so that all architectures pass
the screen_info data via a EFI config table instead of populating struct
screen_info directly, as the latter is only possible when the EFI stub
is baked into the kernel (and not into the decompressor).
However, this means that struct screen_info may not have been populated
yet by the time the earlycon probe takes place, and this results in a
non-functional early console.
So let's probe again right after parsing the config tables and
populating struct screen_info. Note that this means that earlycon output
starts a bit later than before, and so it may fail to capture issues
that occur while doing the early EFI initialization.
Fixes: 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code")
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In commit 3fbd7ee285b2b ("tasks: Add a count of task RCU users"), a
count on the number of RCU users was added to struct task_struct. This
was done so as to enable the removal of task_rcu_dereference(), and
allow tasks to be protected by RCU even after exiting and being removed
from the runqueue. In this commit, the 'refcount_t rcu_users' field that
keeps track of this refcount was put into a union co-located with
'struct rcu_head rcu', so as to avoid taking up any extra space in
task_struct. This was possible to do safely, because the field was only
ever decremented by a static set of specific callers, and then never
incremented again.
While this restriction of there only being a small, static set of users
of this field has worked fine, it prevents us from leveraging the field
to use RCU to protect tasks in other contexts.
During tracing, for example, it would be useful to be able to collect
some tasks that performed a certain operation, put them in a map, and
then periodically summarize who they are, which cgroup they're in, how
much CPU time they've utilized, etc. While this can currently be done
with 'usage', it becomes tricky when a task is already in a map, or if a
reference should only be taken if a task is valid and will not soon be
reaped. Ideally, we could do something like pass a reference to a map
value, and then try to acquire a reference to the task in an RCU read
region by using refcount_inc_not_zero().
Similarly, in sched_ext, schedulers are using integer pids to remember
tasks, and then looking them up with find_task_by_pid_ns(). This is
slow, error prone, and adds complexity. It would be more convenient and
performant if BPF schedulers could instead store tasks directly in maps,
and then leverage RCU to ensure they can be safely accessed with low
overhead.
Finally, overloading fields like this is error prone. Someone that wants
to use 'rcu_users' could easily overlook the fact that once the rcu
callback is scheduled, the refcount will go back to being nonzero, thus
precluding the use of refcount_inc_not_zero(). Furthermore, as described
below, it's possible to extract the fields of the union without changing
the size of task_struct.
There are several possible ways to enable this:
1. The lightest touch approach is likely the one proposed in this patch,
which is to simply extract 'rcu_users' and 'rcu' from the union, so
that scheduling the 'rcu' callback doesn't overwrite the 'rcu_users'
refcount. If we have a trusted task pointer, this would allow us to
use refcnt_inc_not_zero() inside of an RCU region to determine if we
can safely acquire a reference to the task and store it in a map. As
mentioned below, this can be done without changing the size of
task_struct, by moving the location of the union to another location
that has padding gaps we can fill in.
2. Removing 'refcount_t rcu_users', and instead having the entire task
be freed in an rcu callback. This is likely the most sound overall
design, though it changes the behavioral semantics exposed to
callers, who currently expect that a task that's successfully looked
up in e.g. the pid_list with find_task_by_pid_ns(), can always have a
'usage' reference acquired on them, as it's guaranteed to be >
0 until after the next gp. In order for this approach to work, we'd
have to audit all callers. This approach also slightly changes
behavior observed by user space by not invoking
trace_sched_process_free() until the whole task_struct is actually being
freed, rather than just after it's exited. It also may change
timings, as memory will be freed in an RCU callback rather than
immediately when the final 'usage' refcount drops to 0. This also is
arguably a benefit, as it provides more predictable performance to
callers who are refcounting tasks.
3. There may be other solutions as well that don't require changing the
layout of task_struct. For example, we could possibly do something
complex from the BPF side, such as listen for task exit and remove a
task from a map when the task is exiting. This would likely require
significant custom handling for task_struct in the verifier, so a
more generalizable solution is likely warranted.
As mentioned above, this patch proposes the lightest-touch approach
which allows callers elsewhere in the kernel to use 'rcu_users' to
ensure the lifetime of a task, by extracting 'rcu_users' and 'rcu' from
the union. There is no size change in task_struct with this patch.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230215233033.889644-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The "spi" parameters of spi_get_chipselect() and spi_get_csgpiod() can
be const.
Fixes: 303feb3cc06ac066 ("spi: Add APIs in spi core to set/get spi->chip_select and spi->cs_gpiod")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b112de79e7a1e9095a3b6ff22b639f39e39d7748.1678704562.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "spi" parameter of spi_get_drvdata() can be const.
dev_get_drvdata() has been taking a const pointer since commit
7d1d8999b4bec0ba ("i2c: Constify i2c_get_clientdata's parameter").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0f1700ade27a8f3935d04480ff7bef8a887331eb.1678704562.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "spi" parameter of spi_get_ctldata() can be const.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8960e07adaad8d92d2c3aa045af9ee3c5d2130a8.1678704562.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reflect the change from the commit below.
Fixes: cb5a065b4ea9 ("headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>")
Signed-off-by: Thorsten Scherer <t.scherer@eckelmann.de>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
I²C peripheral devices that are connected to the controller are
represented in the Linux kernel as objects of the struct i2c_client.
Fix this in the header file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230302161206.38106-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Linux 6.3-rc2
|
|
Linux 6.3-rc2
|
|
Backmerging to get latest upstream.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit a50297cf8235 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly.
Fixes: a50297cf8235 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The last remaining user of folio_write_one through the write_one_page
wrapper is jfs, so move the functionality there and hard code the
call to metapage_writepage.
Note that the use of the pagecache by the JFS 'metapage' buffer cache
is a bit odd, and we could probably do without VM-level dirty tracking
at all, but that's a change for another time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
|
|
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The next patch adds helpers like create_io_thread, but for use by the
vhost layer. There are several functions, so they are in their own file
instead of cluttering up fork.c. This patch allows that new file to
call copy_process.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Since:
commit 10ab825bdef8 ("change kernel threads to ignore signals instead of
blocking them")
kthreads have been ignoring signals by default, and the vhost layer has
never had a need to change that. This patch adds an option flag,
USER_WORKER_SIG_IGN, handled in copy_process() after copy_sighand()
and copy_signals() so vhost_tasks added in the next patches can continue
to ignore singals.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Each vhost device gets a thread that is used to perform IO and management
operations. Instead of a thread that is accessing a device, the thread is
part of the device, so when it creates a thread using a helper based on
copy_process we can't dup or clone the parent's files/FDS because it
would do an extra increment on ourself.
Later, when we do:
Qemu process exits:
do_exit -> exit_files -> put_files_struct -> close_files
we would leak the device's resources because of that extra refcount
on the fd or file_struct.
This patch adds a no_files option so these worker threads can prevent
taking an extra refcount on themselves.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
This adds a new flag, PF_USER_WORKER, that's used for behavior common to
to both PF_IO_WORKER and users like vhost which will use a new helper
instead of create_io_thread because they require different behavior for
operations like signal handling.
The common behavior PF_USER_WORKER covers is the vm reclaim handling.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
We only set args->io_thread/kthread to 0 or 1 then test if they are set,
so make them bit fields.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
This patch allows kernel users to pass in the thread name so it can be
set during creation instead of having to use set_task_comm after the
thread is created.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
|
|
Rename the function to iio_trigger_poll_nested. Add kernel-doc with
a note on the context where the function is expected to be called.
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
Link: https://lore.kernel.org/r/841b533cba28ca25a8e87280c44e45979166e8e2.1677761379.git.mehdi.djait.k@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move the kernel-doc of the function to industrialio-trigger.c
Add a note on the context where the function is expected to be called.
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/bd84fc17e9d22eab998bf48720297f9a77689f45.1677761379.git.mehdi.djait.k@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The generic bmap() function exported by the VFS takes locks and does
checks that are not necessary for the journal inode. So allow the
file system to set a journal-optimized bmap function in
journal->j_bmap.
Reported-by: syzbot+9543479984ae9e576000@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=e4aaa78795e490421c79f76ec3679006c8ff4cf0
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull put_and_unmap_page() helper from Al Viro:
"kmap_local_page() conversions in local filesystems keep running into
kunmap_local_page()+put_page() combinations. We can keep inventing
names for identical inline helpers, but it's getting rather
inconvenient. I've added a trivial helper to linux/highmem.h instead.
I would've held that back until the merge window, if not for the mess
it causes in tree topology - I've several branches merging from that
one, and it's only going to get worse if e.g. ext2 stuff gets picked
by Jan"
* tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
new helper: put_and_unmap_page()
|
|
If a PTR_TO_BTF_ID type comes from program BTF - not vmlinux or module
BTF - it must have been allocated by bpf_obj_new and therefore must be
free'd with bpf_obj_drop. Such a PTR_TO_BTF_ID is considered a "local
kptr" and is tagged with MEM_ALLOC type tag by bpf_obj_new.
This patch adds support for treating __kptr-tagged pointers to "local
kptrs" as having an implicit bpf_obj_drop destructor for referenced kptr
acquire / release semantics. Consider the following example:
struct node_data {
long key;
long data;
struct bpf_rb_node node;
};
struct map_value {
struct node_data __kptr *node;
};
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__type(key, int);
__type(value, struct map_value);
__uint(max_entries, 1);
} some_nodes SEC(".maps");
If struct node_data had a matching definition in kernel BTF, the verifier would
expect a destructor for the type to be registered. Since struct node_data does
not match any type in kernel BTF, the verifier knows that there is no kfunc
that provides a PTR_TO_BTF_ID to this type, and that such a PTR_TO_BTF_ID can
only come from bpf_obj_new. So instead of searching for a registered dtor,
a bpf_obj_drop dtor can be assumed.
This allows the runtime to properly destruct such kptrs in
bpf_obj_free_fields, which enables maps to clean up map_vals w/ such
kptrs when going away.
Implementation notes:
* "kernel_btf" variable is renamed to "kptr_btf" in btf_parse_kptr.
Before this patch, the variable would only ever point to vmlinux or
module BTFs, but now it can point to some program BTF for local kptr
type. It's later used to populate the (btf, btf_id) pair in kptr btf
field.
* It's necessary to btf_get the program BTF when populating btf_field
for local kptr. btf_record_free later does a btf_put.
* Behavior for non-local referenced kptrs is not modified, as
bpf_find_btf_id helper only searches vmlinux and module BTFs for
matching BTF type. If such a type is found, btf_field_kptr's btf will
pass btf_is_kernel check, and the associated release function is
some one-argument dtor. If btf_is_kernel check fails, associated
release function is two-arg bpf_obj_drop_impl. Before this patch
only btf_field_kptr's w/ kernel or module BTFs were created.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce LSM_ORDER_LAST, to satisfy the requirement of LSMs needing to be
last, e.g. the 'integrity' LSM, without changing the kernel command line or
configuration.
Also, set this order for the 'integrity' LSM. While not enforced, this is
the only LSM expected to use it.
Similarly to LSM_ORDER_FIRST, LSMs with LSM_ORDER_LAST are always enabled
and put at the end of the LSM list, if selected in the kernel
configuration. Setting one of these orders alone, does not cause the LSMs
to be selected and compiled built-in in the kernel.
Finally, for LSM_ORDER_MUTABLE LSMs, set the found variable to true if an
LSM is found, regardless of its order. In this way, the kernel would not
wrongly report that the LSM is not built-in in the kernel if its order is
LSM_ORDER_LAST.
Fixes: 79f7865d844c ("LSM: Introduce "lsm=" for boottime LSM selection")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
btf_record_find's 3rd parameter can be multiple enum btf_field_type's
masked together. The function is called with BPF_KPTR in two places in
verifier.c, so it works with masked values already.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230309180111.1618459-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This has a "#ifdef CONFIG_*" that used to be exposed to userspace.
The names in here are so generic that I don't think it's a good idea
to expose them to userspace (or even the rest of the kernel). There are
multiple in-kernel users, so it's been moved to a kernel header file.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Andrew Waterman <waterman@eecs.berkeley.edu>
Reviewed-by: Albert Ou <aou@eecs.berkeley.edu>
Message-Id: <1447119071-19392-10-git-send-email-palmer@dabbelt.com>
[thuth: Remove it also from tools/include/uapi/linux/hw_breakpoint.h]
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
