| Age | Commit message (Collapse) | Author |
|---|
|
Also partially revert the follow-up change "drm: pl111: Absorb the
external register header".
This reverts the parts of commits
7e4e589db76a3cf4c1f534eb5a09cc6422766b93 and
0fb8125635e8eb5483fb095f98dcf0651206a7b8 that touch paths outside
of drivers/gpu/drm/pl111.
The fbdev driver is used by Android's FVP configuration. Using the
DRM driver together with DRM's fbdev emulation results in a failure
to boot Android. The root cause is that Android's generic fbdev
userspace driver relies on the ability to set the pixel format via
FBIOPUT_VSCREENINFO, which is not supported by fbdev emulation.
There have been other less critical behavioral differences identified
between the fbdev driver and the DRM driver with fbdev emulation. The
DRM driver exposes different values for the panel's width, height and
refresh rate, and the DRM driver fails a FBIOPUT_VSCREENINFO syscall
with yres_virtual greater than the maximum supported value instead
of letting the syscall succeed and setting yres_virtual based on yres.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929195344.2219796-1-pcc@google.com
|
|
There's a common pattern of dynamically allocating an array of char
pointers and then also dynamically allocating each string in this
array. Provide a helper for freeing such a string array with one call.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Provide per device private pointer that can be used by controller
drivers to store device specific private data.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200924081214.16934-2-vigneshr@ti.com
|
|
For QUP IP versions 2.5 and above the oversampling rate is
halved from 32 to 16.
Commit ce734600545f ("tty: serial: qcom_geni_serial: Update
the oversampling rate") is pushed to handle this scenario.
But the existing logic is failing to classify QUP Version 3.0
into the correct group ( 2.5 and above).
As result Serial Engine clocks are not configured properly for
baud rate and garbage data is sampled to FIFOs from the line.
So, fix the logic to detect QUP with versions 2.5 and above.
Fixes: ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Paras Sharma <parashar@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/1601445926-23673-1-git-send-email-parashar@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Quite some drivers make conditional decisions based on in_interrupt() to
invoke either netif_rx() or netif_rx_ni().
Conditionals based on in_interrupt() or other variants of preempt count
checks in drivers should not exist for various reasons and Linus clearly
requested to either split the code pathes or pass an argument to the
common functions which provides the context.
This is obviously the correct solution, but for some of the affected
drivers this needs a major rewrite due to their convoluted structure.
As in_interrupt() usage in drivers needs to be phased out, provide
netif_rx_any_context() as a stop gap for these drivers.
This confines the in_interrupt() conditional to core code which in turn
allows to remove the access to this check for driver code and provides one
central place to do further modifications once the driver maze is cleaned
up.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DM depends on these block 5.10 commits:
22ada802ede8 block: use lcm_not_zero() when stacking chunk_sectors
07d098e6bbad block: allow 'chunk_sectors' to be non-power-of-2
021a24460dc2 block: add QUEUE_FLAG_NOWAIT
6abc49468eea dm: add support for REQ_NOWAIT and enable it for linear target
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
This enables support for attaching freplace programs to multiple attach
points. It does this by amending the UAPI for bpf_link_Create with a target
btf ID that can be used to supply the new attachment point along with the
target program fd. The target must be compatible with the target that was
supplied at program load time.
The implementation reuses the checks that were factored out of
check_attach_btf_id() to ensure compatibility between the BTF types of the
old and new attachment. If these match, a new bpf_tracing_link will be
created for the new attach target, allowing multiple attachments to
co-exist simultaneously.
The code could theoretically support multiple-attach of other types of
tracing programs as well, but since I don't have a use case for any of
those, there is no API support for doing so.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/160138355169.48470.17165680973640685368.stgit@toke.dk
|
|
In preparation for allowing multiple attachments of freplace programs, move
the references to the target program and trampoline into the
bpf_tracing_link structure when that is created. To do this atomically,
introduce a new mutex in prog->aux to protect writing to the two pointers
to target prog and trampoline, and rename the members to make it clear that
they are related.
With this change, it is no longer possible to attach the same tracing
program multiple times (detaching in-between), since the reference from the
tracing program to the target disappears on the first attach. However,
since the next patch will let the caller supply an attach target, that will
also make it possible to attach to the same place multiple times.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/160138355059.48470.2503076992210324984.stgit@toke.dk
|
|
PCI devices support two variants of the D3 power state: D3hot (main power
present) D3cold (main power removed). Previously struct pci_dev contained:
unsigned int d3_delay; /* D3->D0 transition time in ms */
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
"d3_delay" refers specifically to the D3hot state. Rename it to
"d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for
Specifying Device Readiness Durations" in the PCI Firmware spec r3.2,
sec 4.6.9.
There is no change to the functionality.
Link: https://lore.kernel.org/r/20200730210848.1578826-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The "struct dev_pm_ops pcibios_pm_ops", declared in include/linux/pci.h and
defined in drivers/pci/pci-driver.c, provided arch-specific hooks when a
PCI device was doing a hibernate transition.
394216275c7d ("s390: remove broken hibernate / power management support")
removed the last use of pcibios_pm_ops, so remove it completely.
[bhelgaas: drop unused "error"]
Link: https://lore.kernel.org/r/20200730194416.1029509-1-vaibhavgupta40@gmail.com
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
efivars_sysfs_init() is only used locally in the source file that
defines it, so make it static and unexport it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The worker thread that gets kicked off to sync the state of the
EFI variable list is only used by the EFI pstore implementation,
and is defined in its source file. So let's move its scheduling
there as well. Since our efivar_init() scan will bail on duplicate
entries, there is no need to disable the workqueue like we did
before, so we can run it unconditionally.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The EFI pstore implementation relies on the 'efivars' abstraction,
which encapsulates the EFI variable store in a way that can be
overridden by other backing stores, like the Google SMI one.
On top of that, the EFI pstore implementation also relies on the
efivars.ko module, which is a separate layer built on top of the
'efivars' abstraction that exposes the [deprecated] sysfs entries
for each variable that exists in the backing store.
Since the efivars.ko module is deprecated, and all users appear to
have moved to the efivarfs file system instead, let's prepare for
its removal, by removing EFI pstore's dependency on it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The intent here is to minimize the use of iio_buffer_set_attrs(). Since we
are planning to add support for multiple IIO buffers per IIO device, the
issue has to do with:
1. Accessing 'indio_dev->buffer' directly (as is done with
'iio_buffer_set_attrs(indio_dev->buffer, <attrs>)').
2. The way that the buffer attributes would get handled or expanded when
there are more buffers per IIO device. Current a sysfs kobj_type expands
into a 'device' object that expands into an 'iio_dev' object.
We will need to change this, so that the sysfs attributes for IIO
buffers expand into IIO buffers at some point.
Right now, the current IIO framework works fine for the
'1 IIO device == 1 IIO buffer' case (that is now).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20200923130339.997902-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This is to encourage the use of devm_iio_dmaengine_buffer_alloc().
Currently the managed version of the DMAEngine buffer alloc is the only
function used from this part of the framework.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200923121810.944075-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are no in-tree users of the platform data for this driver, so
remove it and convert the driver to use device tree instead.
Signed-off-by: Michael Auchter <michael.auchter@ni.com>
Link: https://lore.kernel.org/r/20200922144422.542669-1-michael.auchter@ni.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
function
Previously, devfreq core support 'devfreq-events' property in order to get
the devfreq-event device by phandle. But, 'devfreq-events' property name is
not proper on devicetree binding because this name doesn't mean
the any h/w attribute.
The devfreq-event core hand over the rights to decide the property name
for getting the devfreq-event device on devicetree. Each devfreq-event driver
will decide the property name on devicetree binding and then pass
the their own property name to devfreq_event_get_edev_by_phandle function.
And change the prototype of devfreq_event_get_edev_count function
because of used deprecated 'devfreq-events' property.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Previously, devfreq core support 'devfreq' property in order to get
the devfreq device by phandle. But, 'devfreq' property name is not proper
on devicetree binding because this name doesn't mean the any h/w attribute.
The devfreq core hand over the right to decide the property name
for getting the devfreq device on devicetree. Each devfreq driver
will decide the property name on devicetree binding and pass
the their own property name to devfreq_get_devfreq_by_phandle function.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Split off part of devfreq_get_devfreq_by_phandle into a separate
function. This allows callers to fetch devfreq instances by enumerating
devicetree instead of explicit phandles.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[cw00.choi: Export devfreq_get_devfreq_by_node function and
add function to devfreq.h when CONFIG_PM_DEVFREQ is enabled.]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Adding reference clock (1us tic) for all LPI timer on Intel platforms.
The reference clock is derived from ptp clk. This also enables all LPI
counter.
Signed-off-by: Rusaimi Amira Ruslan <rusaimi.amira.rusaimi@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A helper is added to allow seq file writing of kernel data
structures using vmlinux BTF. Its signature is
long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr,
u32 btf_ptr_size, u64 flags);
Flags and struct btf_ptr definitions/use are identical to the
bpf_snprintf_btf helper, and the helper returns 0 on success
or a negative error value.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-8-git-send-email-alan.maguire@oracle.com
|
|
A helper is added to support tracing kernel type information in BPF
using the BPF Type Format (BTF). Its signature is
long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr,
u32 btf_ptr_size, u64 flags);
struct btf_ptr * specifies
- a pointer to the data to be traced
- the BTF id of the type of data pointed to
- a flags field is provided for future use; these flags
are not to be confused with the BTF_F_* flags
below that control how the btf_ptr is displayed; the
flags member of the struct btf_ptr may be used to
disambiguate types in kernel versus module BTF, etc;
the main distinction is the flags relate to the type
and information needed in identifying it; not how it
is displayed.
For example a BPF program with a struct sk_buff *skb
could do the following:
static struct btf_ptr b = { };
b.ptr = skb;
b.type_id = __builtin_btf_type_id(struct sk_buff, 1);
bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0);
Default output looks like this:
(struct sk_buff){
.transport_header = (__u16)65535,
.mac_header = (__u16)65535,
.end = (sk_buff_data_t)192,
.head = (unsigned char *)0x000000007524fd8b,
.data = (unsigned char *)0x000000007524fd8b,
.truesize = (unsigned int)768,
.users = (refcount_t){
.refs = (atomic_t){
.counter = (int)1,
},
},
}
Flags modifying display are as follows:
- BTF_F_COMPACT: no formatting around type information
- BTF_F_NONAME: no struct/union member names/types
- BTF_F_PTR_RAW: show raw (unobfuscated) pointer values;
equivalent to %px.
- BTF_F_ZERO: show zero-valued struct/union members;
they are not displayed by default
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-4-git-send-email-alan.maguire@oracle.com
|
|
generalize the "seq_show" seq file support in btf.c to support
a generic show callback of which we support two instances; the
current seq file show, and a show with snprintf() behaviour which
instead writes the type data to a supplied string.
Both classes of show function call btf_type_show() with different
targets; the seq file or the string to be written. In the string
case we need to track additional data - length left in string to write
and length to return that we would have written (a la snprintf).
By default show will display type information, field members and
their types and values etc, and the information is indented
based upon structure depth. Zeroed fields are omitted.
Show however supports flags which modify its behaviour:
BTF_SHOW_COMPACT - suppress newline/indent.
BTF_SHOW_NONAME - suppress show of type and member names.
BTF_SHOW_PTR_RAW - do not obfuscate pointer values.
BTF_SHOW_UNSAFE - do not copy data to safe buffer before display.
BTF_SHOW_ZERO - show zeroed values (by default they are not shown).
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-3-git-send-email-alan.maguire@oracle.com
|
|
It will be used later for BPF structure display support
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-2-git-send-email-alan.maguire@oracle.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
* DSI support for sm8150/sm8250
* Support for per-process GPU pagetables (finally!) for a6xx.
There are still some iommu/arm-smmu changes required to
enable, without which it will fallback to the current single
pgtable state. The first part (ie. what doesn't depend on
drm side patches) is queued up for v5.10[1].
* DisplayPort support. Userspace DP compliance tool support
is already merged in IGT[2]
* The usual assortment of smaller fixes/cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
|
|
The check_attach_btf_id() function really does three things:
1. It performs a bunch of checks on the program to ensure that the
attachment is valid.
2. It stores a bunch of state about the attachment being requested in
the verifier environment and struct bpf_prog objects.
3. It allocates a trampoline for the attachment.
This patch splits out (1.) and (3.) into separate functions which will
perform the checks, but return the computed values instead of directly
modifying the environment. This is done in preparation for reusing the
checks when the actual attachment is happening, which will allow tracing
programs to have multiple (compatible) attachments.
This also fixes a bug where a bunch of checks were skipped if a trampoline
already existed for the tracing target.
Fixes: 6ba43b761c41 ("bpf: Attachment verification for BPF_MODIFY_RETURN")
Fixes: 1e6c62a88215 ("bpf: Introduce sleepable BPF programs")
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In preparation for moving code around, change a bunch of references to
env->log (and the verbose() logging helper) to use bpf_log() and a direct
pointer to struct bpf_verifier_log. While we're touching the function
signature, mark the 'prog' argument to bpf_check_type_match() as const.
Also enhance the bpf_verifier_log_needed() check to handle NULL pointers
for the log struct so we can re-use the code with logging disabled.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch is to add a new variable 'nested_level' into the net_device
structure.
This variable will be used as a parameter of spin_lock_nested() of
dev->addr_list_lock.
netif_addr_lock() can be called recursively so spin_lock_nested() is
used instead of spin_lock() and dev->lower_level is used as a parameter
of spin_lock_nested().
But, dev->lower_level value can be updated while it is being used.
So, lockdep would warn a possible deadlock scenario.
When a stacked interface is deleted, netif_{uc | mc}_sync() is
called recursively.
So, spin_lock_nested() is called recursively too.
At this moment, the dev->lower_level variable is used as a parameter of it.
dev->lower_level value is updated when interfaces are being unlinked/linked
immediately.
Thus, After unlinking, dev->lower_level shouldn't be a parameter of
spin_lock_nested().
A (macvlan)
|
B (vlan)
|
C (bridge)
|
D (macvlan)
|
E (vlan)
|
F (bridge)
A->lower_level : 6
B->lower_level : 5
C->lower_level : 4
D->lower_level : 3
E->lower_level : 2
F->lower_level : 1
When an interface 'A' is removed, it releases resources.
At this moment, netif_addr_lock() would be called.
Then, netdev_upper_dev_unlink() is called recursively.
Then dev->lower_level is updated.
There is no problem.
But, when the bridge module is removed, 'C' and 'F' interfaces
are removed at once.
If 'F' is removed first, a lower_level value is like below.
A->lower_level : 5
B->lower_level : 4
C->lower_level : 3
D->lower_level : 2
E->lower_level : 1
F->lower_level : 1
Then, 'C' is removed. at this moment, netif_addr_lock() is called
recursively.
The ordering is like this.
C(3)->D(2)->E(1)->F(1)
At this moment, the lower_level value of 'E' and 'F' are the same.
So, lockdep warns a possible deadlock scenario.
In order to avoid this problem, a new variable 'nested_level' is added.
This value is the same as dev->lower_level - 1.
But this value is updated in rtnl_unlock().
So, this variable can be used as a parameter of spin_lock_nested() safely
in the rtnl context.
Test commands:
ip link add br0 type bridge vlan_filtering 1
ip link add vlan1 link br0 type vlan id 10
ip link add macvlan2 link vlan1 type macvlan
ip link add br3 type bridge vlan_filtering 1
ip link set macvlan2 master br3
ip link add vlan4 link br3 type vlan id 10
ip link add macvlan5 link vlan4 type macvlan
ip link add br6 type bridge vlan_filtering 1
ip link set macvlan5 master br6
ip link add vlan7 link br6 type vlan id 10
ip link add macvlan8 link vlan7 type macvlan
ip link set br0 up
ip link set vlan1 up
ip link set macvlan2 up
ip link set br3 up
ip link set vlan4 up
ip link set macvlan5 up
ip link set br6 up
ip link set vlan7 up
ip link set macvlan8 up
modprobe -rv bridge
Splat looks like:
[ 36.057436][ T744] WARNING: possible recursive locking detected
[ 36.058848][ T744] 5.9.0-rc6+ #728 Not tainted
[ 36.059959][ T744] --------------------------------------------
[ 36.061391][ T744] ip/744 is trying to acquire lock:
[ 36.062590][ T744] ffff8c4767509280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_set_rx_mode+0x19/0x30
[ 36.064922][ T744]
[ 36.064922][ T744] but task is already holding lock:
[ 36.066626][ T744] ffff8c4767769280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_uc_add+0x1e/0x60
[ 36.068851][ T744]
[ 36.068851][ T744] other info that might help us debug this:
[ 36.070731][ T744] Possible unsafe locking scenario:
[ 36.070731][ T744]
[ 36.072497][ T744] CPU0
[ 36.073238][ T744] ----
[ 36.074007][ T744] lock(&vlan_netdev_addr_lock_key);
[ 36.075290][ T744] lock(&vlan_netdev_addr_lock_key);
[ 36.076590][ T744]
[ 36.076590][ T744] *** DEADLOCK ***
[ 36.076590][ T744]
[ 36.078515][ T744] May be due to missing lock nesting notation
[ 36.078515][ T744]
[ 36.080491][ T744] 3 locks held by ip/744:
[ 36.081471][ T744] #0: ffffffff98571df0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x236/0x490
[ 36.083614][ T744] #1: ffff8c4767769280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_uc_add+0x1e/0x60
[ 36.085942][ T744] #2: ffff8c476c8da280 (&bridge_netdev_addr_lock_key/4){+...}-{2:2}, at: dev_uc_sync+0x39/0x80
[ 36.088400][ T744]
[ 36.088400][ T744] stack backtrace:
[ 36.089772][ T744] CPU: 6 PID: 744 Comm: ip Not tainted 5.9.0-rc6+ #728
[ 36.091364][ T744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 36.093630][ T744] Call Trace:
[ 36.094416][ T744] dump_stack+0x77/0x9b
[ 36.095385][ T744] __lock_acquire+0xbc3/0x1f40
[ 36.096522][ T744] lock_acquire+0xb4/0x3b0
[ 36.097540][ T744] ? dev_set_rx_mode+0x19/0x30
[ 36.098657][ T744] ? rtmsg_ifinfo+0x1f/0x30
[ 36.099711][ T744] ? __dev_notify_flags+0xa5/0xf0
[ 36.100874][ T744] ? rtnl_is_locked+0x11/0x20
[ 36.101967][ T744] ? __dev_set_promiscuity+0x7b/0x1a0
[ 36.103230][ T744] _raw_spin_lock_bh+0x38/0x70
[ 36.104348][ T744] ? dev_set_rx_mode+0x19/0x30
[ 36.105461][ T744] dev_set_rx_mode+0x19/0x30
[ 36.106532][ T744] dev_set_promiscuity+0x36/0x50
[ 36.107692][ T744] __dev_set_promiscuity+0x123/0x1a0
[ 36.108929][ T744] dev_set_promiscuity+0x1e/0x50
[ 36.110093][ T744] br_port_set_promisc+0x1f/0x40 [bridge]
[ 36.111415][ T744] br_manage_promisc+0x8b/0xe0 [bridge]
[ 36.112728][ T744] __dev_set_promiscuity+0x123/0x1a0
[ 36.113967][ T744] ? __hw_addr_sync_one+0x23/0x50
[ 36.115135][ T744] __dev_set_rx_mode+0x68/0x90
[ 36.116249][ T744] dev_uc_sync+0x70/0x80
[ 36.117244][ T744] dev_uc_add+0x50/0x60
[ 36.118223][ T744] macvlan_open+0x18e/0x1f0 [macvlan]
[ 36.119470][ T744] __dev_open+0xd6/0x170
[ 36.120470][ T744] __dev_change_flags+0x181/0x1d0
[ 36.121644][ T744] dev_change_flags+0x23/0x60
[ 36.122741][ T744] do_setlink+0x30a/0x11e0
[ 36.123778][ T744] ? __lock_acquire+0x92c/0x1f40
[ 36.124929][ T744] ? __nla_validate_parse.part.6+0x45/0x8e0
[ 36.126309][ T744] ? __lock_acquire+0x92c/0x1f40
[ 36.127457][ T744] __rtnl_newlink+0x546/0x8e0
[ 36.128560][ T744] ? lock_acquire+0xb4/0x3b0
[ 36.129623][ T744] ? deactivate_slab.isra.85+0x6a1/0x850
[ 36.130946][ T744] ? __lock_acquire+0x92c/0x1f40
[ 36.132102][ T744] ? lock_acquire+0xb4/0x3b0
[ 36.133176][ T744] ? is_bpf_text_address+0x5/0xe0
[ 36.134364][ T744] ? rtnl_newlink+0x2e/0x70
[ 36.135445][ T744] ? rcu_read_lock_sched_held+0x32/0x60
[ 36.136771][ T744] ? kmem_cache_alloc_trace+0x2d8/0x380
[ 36.138070][ T744] ? rtnl_newlink+0x2e/0x70
[ 36.139164][ T744] rtnl_newlink+0x47/0x70
[ ... ]
Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
infrastructure
Functions related to nested interface infrastructure such as
netdev_walk_all_{ upper | lower }_dev() pass both private functions
and "data" pointer to handle their own things.
At this point, the data pointer type is void *.
In order to make it easier to expand common variables and functions,
this new netdev_nested_priv structure is added.
In the following patch, a new member variable will be added into this
struct to fix the lockdep issue.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dentries that represent no-key names must have a dentry_operations that
includes fscrypt_d_revalidate(). Currently, this is handled by
fscrypt_prepare_lookup() installing fscrypt_d_ops.
However, ceph support for encryption
(https://lore.kernel.org/r/20200914191707.380444-1-jlayton@kernel.org)
can't use fscrypt_d_ops, since ceph already has its own
dentry_operations.
Similarly, ext4 and f2fs support for directories that are both encrypted
and casefolded
(https://lore.kernel.org/r/20200923010151.69506-1-drosen@google.com)
can't use fscrypt_d_ops either, since casefolding requires some dentry
operations too.
To satisfy both users, we need to move the responsibility of installing
the dentry_operations to filesystems.
In preparation for this, export fscrypt_d_revalidate() and give it a
!CONFIG_FS_ENCRYPTION stub.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200924054721.187797-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs
the target program on a specific CPU. This is achieved by a new flag in
bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program
is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for
BPF programs that handle perf_event and other percpu resources, as the
program can access these resource locally.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200925205432.1777-2-songliubraving@fb.com
|
|
regmap: Add a bulk field API
Useful for devices with many fields.
|
|
Usage of regmap_field_alloc becomes much overhead when number of fields
exceed more than 3.
QCOM LPASS driver has extensively converted to use regmap_fields.
Using new bulk api to allocate fields makes it much more cleaner code to read!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20200925164856.10315-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- NFSv4.2: copy_file_range needs to invalidate caches on success
- NFSv4.2: Fix security label length not being reset
- pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly
on read
- pNFS/flexfiles: Fix signed/unsigned type issues with mirror
indices"
* tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS/flexfiles: Be consistent about mirror index types
pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read
NFSv4.2: fix client's attribute cache management for copy_file_range
nfs: Fix security label length not being reset
|
|
If associated ect device is not enabled at first place, disable
routine should not be called. Add ect_enabled flag to check whether
ect device is enabled. Fix the issue in below case. Ect device is
not available when associated coresight device enabled and the
association is established after coresight device is enabled.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-20-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED
that is true for both built-ins and modules, instead. Required
when building coresight components as modules.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is to avoid the deadlock caused in btrfs because of O_DIRECT |
O_DSYNC.
Filesystems such as btrfs require i_rwsem while performing sync on a
file. iomap_dio_rw() is called under i_rw_sem. This leads to a
deadlock because of:
iomap_dio_complete()
generic_write_sync()
btrfs_sync_file()
Separate out iomap_dio_complete() from iomap_dio_rw(), so filesystems
can call iomap_dio_complete() after unlocking i_rwsem.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Commit 8234f6734c5d ("PM-runtime: Switch autosuspend over to using
hrtimers") switched PM runtime autosuspend to use hrtimers and all
related time accounting in ns, but missed to update the timer_expires
data type in struct dev_pm_info to u64.
This causes the timer_expires value to be truncated on 32-bit
architectures when assignment is done from u64 values:
rpm_suspend()
|- dev->power.timer_expires = expires;
Fix it by changing the timer_expires type to u64.
Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Embed a generic NAND ECC high-level object in the nand_device
structure to carry all the ECC engine configuration/data.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-16-miquel.raynal@bootlin.com
|
|
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC requirements access behind helpers so we can later
split those 2 concepts. As the structures have not been clarified yet,
these helpers access the same internal variable as
nanddev_get_ecc_conf() for now.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-14-miquel.raynal@bootlin.com
|
|
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC configuration access behind a helper so we can later
split those 2 concepts.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-12-miquel.raynal@bootlin.com
|
|
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
|
|
The use of "syndrome" placement should not be encoded in the ECC
engine mode/type.
Create a "placement" field in NAND chip and change all occurrences of
the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and
possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-10-miquel.raynal@bootlin.com
|
|
ARMv8.4-PMU introduces the PMMIR_EL1 registers and some new PMU events,
like STALL_SLOT etc, are related to it. Let's add a caps directory to
/sys/bus/event_source/devices/armv8_pmuv3_0/ and support slots from
PMMIR_EL1 registers in this entry. The user programs can get the slots
from sysfs directly.
/sys/bus/event_source/devices/armv8_pmuv3_0/caps/slots is exposed
under sysfs. Both ARMv8.4-PMU and STALL_SLOT event are implemented,
it returns the slots from PMMIR_EL1, otherwise it will return 0.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1600754025-53535-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allow the user to configure below Spatial Reuse Parameter Set element.
* Non-SRG OBSS PD Max Offset
* SRG BSS Color Bitmap
* SRG Partial BSSID Bitmap
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1601278091-20313-2-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The changes required for associating in S1G are:
- apply S1G BSS channel info before assoc
- mark all S1G STAs as QoS STAs
- include and parse AID request element
- handle new Association Response format
- don't fail assoc if supported rates element is missing
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com
[pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
S1G allows listen interval up to 2^14 * 10000 beacon
intervals. In order to do this listen interval needs a
scaling factor applied to the lower 14 bits. Calculate
this and properly encode the listen interval for S1G STAs.
See IEEE802.11ah-2016 Table 9-44a for reference.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com
[move listen_int_usf into function using it]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The sending STA type is implicit based on beacon or probe
response content. If sending STA was an S1G STA, adjust
the Information Element location accordingly.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-9-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
NL80211_ATTR_S1G_CAPABILITY can be passed along with
NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE
to indicate S1G capabilities which should override the
hardware capabilities in eg. the association request.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-4-thomas@adapt-ip.com
[johannes: always require both attributes together, commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
