| Age | Commit message (Collapse) | Author |
|---|
|
Use the address alignment requirements from the block_device for direct
io instead of requiring addresses be aligned to the block size. User
space can discover the alignment requirements from the dma_alignment
queue attribute.
User space can specify any hardware compatible DMA offset for each
segment, but every segment length is still required to be a multiple of
the block size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-11-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Provide a convenient function for this repeatable coding pattern.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-10-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The existing iov_iter_alignment() function returns the logical OR of
address and length. For cases where address and length need to be
considered separately, introduce a helper function that a caller can
specificy length and address masks that indicate if the iov is
unaligned.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-9-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Preparing for upcoming dma_alignment users that have a block_device, but
don't need the request_queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-5-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are only a few drivers that do not call
spi_finalize_current_message() in the context of transfer_one_message(),
and even for those cases the completion ctlr->cur_msg_completion is not
needed always. The calls to complete() and wait_for_completion() each
take a spin-lock, which is costly. This patch makes it possible to avoid
those calls in the big majority of cases, by introducing two flags that
with the help of ordering via barriers can avoid using the completion
safely. In case of a race with the context calling
spi_finalize_current_message(), the scheme errs on the safe side and takes
the completion.
The impact of this patch is worth the effort: On a i.MX8MM SoC, the time
the SPI bus is idle between two consecutive calls to spi_sync(), is
reduced from 19.6us to 16.8us... roughly 15%.
Signed-off-by: David Jander <david@protonic.nl>
Link: https://lore.kernel.org/r/20220621061234.3626638-12-david@protonic.nl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch introduces a completion that is completed in
spi_finalize_current_message() and waited for in
__spi_pump_transfer_message(). This way all manipulation of ctlr->cur_msg
is done with the io_mutex held and strictly ordered:
__spi_pump_transfer_message() will not return until
spi_finalize_current_message() is done using ctlr->cur_msg, and its
calling context is only touching ctlr->cur_msg after returning.
Due to this, we can safely drop the spin-locks around ctlr->cur_msg.
Signed-off-by: David Jander <david@protonic.nl>
Link: https://lore.kernel.org/r/20220621061234.3626638-11-david@protonic.nl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ctlr->idling flag is never checked now, so we don't need to set it
either.
Signed-off-by: David Jander <david@protonic.nl>
Link: https://lore.kernel.org/r/20220621061234.3626638-8-david@protonic.nl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The interaction with the controller message queue and its corresponding
auxiliary flags and variables requires the use of the queue_lock which is
costly. Since spi_sync will transfer the complete message anyway, and not
return until it is finished, there is no need to put the message into the
queue if the queue is empty. This can save a lot of overhead.
As an example of how significant this is, when using the MCP2518FD SPI CAN
controller on a i.MX8MM SoC, the time during which the interrupt line
stays active (during 3 relatively short spi_sync messages), is reduced
from 98us to 72us by this patch.
Signed-off-by: David Jander <david@protonic.nl>
Link: https://lore.kernel.org/r/20220621061234.3626638-3-david@protonic.nl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This enables the possibility to transfer a message that is not at the
current tip of the async message queue.
This is in preparation of the next patch(es) which enable spi_sync messages
to skip the queue altogether.
Signed-off-by: David Jander <david@protonic.nl>
Link: https://lore.kernel.org/r/20220621061234.3626638-2-david@protonic.nl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As a follow-up to the commit 4173f018aae1 (tty/vt: consolemap: rename
and document struct uni_pagedir), rename also the members of struct
vc_data. I.e. pagedir -> pagedict. And while touching all the places,
remove also the unnecessary vc_ prefix.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220614090537.15557-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-06-25
this is a pull request of 22 patches for net-next/master.
The first 2 patches target the xilinx driver. Srinivas Neeli's patch
adds Transmitter Delay Compensation (TDC) support, a patch by me fixes
a typo.
The next patch is by me and fixes a typo in the m_can driver.
Another patch by me allows the configuration of fixed bit rates
without need for do_set_bittiming callback.
The following 7 patches are by Vincent Mailhol and refactor the
can-dev module and Kbuild, de-inline the can_dropped_invalid_skb()
function, which has grown over the time, and drop outgoing skbs if the
controller is in listen only mode.
Max Staudt's patch fixes a reference in the networking/can.rst
documentation.
Vincent Mailhol provides 2 patches with cleanups for the etas_es58x
driver.
Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi.
Another patch by me allows the configuration of fixed data bit rates
without need for do_set_data_bittiming callback.
The last 5 patches are by Frank Jungclaus. They prepare the esd_usb
driver to add support for the the CAN-USB/3 device in a later series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a PCS driver for the MII converter that is present on the Renesas
RZ/N1 SoC. This MII converter is reponsible for converting MII to
RMII/RGMII or act as a MII pass-trough. Exposing it as a PCS allows to
reuse it in both the switch driver and the stmmac driver. Currently,
this driver only allows the PCS to be used by the dual Cortex-A7
subsystem since the register locking system is not used.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.
Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.
The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.
The original DRM interface is kept in place for use by DRM drivers.
v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-3-tzimmermann@suse.de
|
|
Commit
c536ed2fffd5 ("objtool: Remove SAVE/RESTORE hints")
removed the save/restore unwind hints because they were no longer
needed. Now they're going to be needed again so re-add them.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Since entry asm is tricky, add a validation pass that ensures the
retbleed mitigation has been done before the first actual RET
instruction.
Entry points are those that either have UNWIND_HINT_ENTRY, which acts
as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or
those that have UWIND_HINT_IRET_REGS at +0.
This is basically a variant of validate_branch() that is
intra-function and it will simply follow all branches from marked
entry points and ensures that all paths lead to ANNOTATE_UNRET_END.
If a path hits RET or an indirection the path is a fail and will be
reported.
There are 3 ANNOTATE_UNRET_END instances:
- UNTRAIN_RET itself
- exception from-kernel; this path doesn't need UNTRAIN_RET
- all early exceptions; these also don't need UNTRAIN_RET
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary
Speculative Code Execution with Return Instructions) attack.
[peterz: add hygon]
[kim: invert parity; fam15h]
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
The recent mmio_stale_data fixes broke the noinstr constraints:
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x15b: call to wrmsrl.constprop.0() leaves .noinstr.text section
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1bf: call to kvm_arch_has_assigned_device() leaves .noinstr.text section
make it all happy again.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This was removed before due to the complete lack of users, but
3218910fd585 ("dmaengine: Add core function and capability check for
DMA_MEMCPY_SG") and 29cf37fa6dd9 ("dmaengine: Add consumer for the new
DMA_MEMCPY_SG API function.") added it back despite still not having
any users whatsoever.
Fixes: 3218910fd585 ("dmaengine: Add core function and capability check for DMA_MEMCPY_SG")
Fixes: 29cf37fa6dd9 ("dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220606074733.622616-1-hch@lst.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
|
|
Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.
This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.
The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.
Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Adapt the security_inode_setattr() helper to pass down the mount's
idmapping to account for that change.
Link: https://lore.kernel.org/r/20220621141454.2914719-8-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Port the is_quota_modification() and dqout_transfer() helper to type
safe vfs{g,u}id_t. Since these helpers are only called by a few
filesystems don't introduce a new helper but simply extend the existing
helpers to pass down the mount's idmapping.
Note, that this is a non-functional change, i.e. nothing will have
happened here or at the end of this series to how quota are done! This
a change necessary because we will at the end of this series make
ownership changes easier to reason about by keeping the original value
in struct iattr for both non-idmapped and idmapped mounts.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
Since struct iattr uses an anonymous union with overlapping types as
supported by the C standard, filesystems that haven't converted to
ia_vfs{g,u}id won't see any difference and things will continue to work
as before. In other words, no functional changes intended with this
change.
Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
No functional changes intended.
Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Nearly all fileystems currently open-code the same checks for
determining whether the i_{g,u}id fields of an inode need to be updated
and then updating the fields.
Introduce tiny helpers i_{g,u}id_needs_update() and i_{g,u}id_update()
that wrap this logic. This allows filesystems to not care about updating
inode->i_{g,u}id with the correct values themselves instead leaving this
to the helpers.
We also get rid of a lot of code duplication and make it easier to
change struct iattr in the future since changes can be localized to
these helpers.
And finally we make it hard to conflate k{g,u}id_t types with
vfs{g,u}id_t types for filesystems that support idmapped mounts.
In the following patch we will port all filesystems that raise
FS_ALLOW_IDMAP to use the new helpers. However, the ultimate goal is to
convert all filesystems to make use of these helpers.
All new helpers are nops on non-idmapped mounts.
Link: https://lore.kernel.org/r/20220621141454.2914719-5-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Add ia_vfs{g,u}id members of type vfs{g,u}id_t to struct iattr. We use
an anonymous union (similar to what we do in struct file) around
ia_{g,u}id and ia_vfs{g,u}id.
At the end of this series ia_{g,u}id and ia_vfs{g,u}id will always
contain the same value independent of whether struct iattr is
initialized from an idmapped mount. This is a change from how this is
done today.
Wrapping this in a anonymous unions has a few advantages. It allows us
to avoid needlessly increasing struct iattr. Since the types for
ia_{g,u}id and ia_vfs{g,u}id are structures with overlapping/identical
members they are covered by 6.5.2.3/6 of the C standard and it is safe
to initialize and access them.
Filesystems that raise FS_ALLOW_IDMAP and thus support idmapped mounts
will have to use ia_vfs{g,u}id and the associated helpers. And will be
ported at the end of this series. They will immediately benefit from the
type safe new helpers.
Filesystems that do not support FS_ALLOW_IDMAP can continue to use
ia_{g,u}id for now. The aim is to convert every filesystem to always use
ia_vfs{g,u}id and thus ultimately remove the ia_{g,u}id members.
Link: https://lore.kernel.org/r/20220621141454.2914719-4-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Introduce i_{g,u}id_into_vfs{g,u}id(). They return vfs{g,u}id_t. This
makes it way harder to confused idmapped mount {g,u}ids with filesystem
{g,u}ids.
The two helpers will eventually replace the old non type safe
i_{g,u}id_into_mnt() helpers once we finished converting all places. Add
a comment noting that they will be removed in the future.
All new helpers are nops on non-idmapped mounts.
Link: https://lore.kernel.org/r/20220621141454.2914719-3-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Introduces new vfs{g,u}id_t types. Similar to k{g,u}id_t the new types
are just simple wrapper structs around regular {g,u}id_t types.
They allows to establish a type safety boundary between {g,u}ids on
idmapped mounts and {g,u}ids as they are represented in filesystems
themselves.
A vfs{g,u}id_t is always created from a k{g,u}id_t, never directly from
a {g,u}id_t as idmapped mounts remap a given {g,u}id according to the
mount's idmapping. This is expressed in the VFS{G,U}IDT_INIT() macros.
A vfs{g,u}id_t may be used as a k{g,u}id_t via AS_K{G,U}IDT(). This
often happens when we need to check whether a {g,u}id mapped according
to an idmapped mount is identical to a given k{g,u}id_t. For an example,
see vfsgid_in_group_p() which determines whether the value of vfsgid_t
matches the value of any of the caller's groups. Similar logic is
expressed in the k{g,u}id_eq_vfs{g,u}id().
The from_vfs{g,u}id() helpers map a given vfs{g,u}id_t from the mount's
idmapping into the filesystem idmapping. They make it possible to update
a filesystem object such as inode->i_{g,u}id with the correct value.
This makes it harder to accidently write a wrong {g,u}id anwywhere. The
vfs{g,u}id_has_fsmapping() helpers check whether a given vfs{g,u}id_t
can be mapped into the filesystem idmapping.
All new helpers are nops on non-idmapped mounts.
I've done work on this roughly 7 months ago but dropped it to focus on
the testsuite. Linus brought this up independently just last week and
it's time to move this along (see [1]).
[1]: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com
Link: https://lore.kernel.org/r/20220621141454.2914719-2-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- make the irqchip immutable in gpio-realtek-otto
- fix error code propagation in gpio-winbond
- fix device removing in gpio-grgpio
- fix a typo in gpio-mxs which indicates the driver is for a different
model
- documentation fixes
- MAINTAINERS file updates
* tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mxs: Fix header comment
gpio: Fix kernel-doc comments to nested union
gpio: grgpio: Fix device removing
gpio: winbond: Fix error code in winbond_gpio_get()
gpio: realtek-otto: Make the irqchip immutable
docs: driver-api: gpio: Fix filename mismatch
MAINTAINERS: add include/dt-bindings/gpio to GPIO SUBSYSTEM
|
|
The "1<<31" shift has a sign extension bug so IFF_TX_SKB_NO_LINEAR is
0xffffffff80000000 instead of 0x0000000080000000.
Fixes: c2ff53d8049f ("net: Add priv_flags for allow tx skb without linear")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/YrRrcGttfEVnf85Q@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the len fields manipulation in the skbs to a helper function.
There is a comment specifically requesting this and there are several
other areas in the code displaying the same pattern which can be
refactored.
This improves code readability.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/20220622160853.GA6478@debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the fiddly bits of the efivar layer into its only remaining user,
efivarfs, and confine its use to that particular module. All other uses
of the EFI variable store have no need for this additional layer of
complexity, given that they either only read variables, or read and
write variables into a separate GUIDed namespace, and cannot be used to
manipulate EFI variables that are covered by the EFI spec and/or affect
the boot flow.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
__efivar_entry_iter() uses a list iterator in a dubious way, i.e., it
assumes that the iteration variable always points to an object of the
appropriate type, even if the list traversal exhausts the list
completely, in which case it will point somewhere in the vicinity of the
list's anchor instead.
Fortunately, we no longer use this function so we can just get rid of it
entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Both efivars and efivarfs uses __efivar_entry_iter() to go over the
linked list that shadows the list of EFI variables held by the firmware,
but fail to call the begin/end helpers that are documented as a
prerequisite.
So switch to the proper version, which is efivar_entry_iter(). Given
that in both cases, efivar_entry_remove() is invoked with the lock held
already, don't take the lock there anymore.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit 5d9db883761a ("efi: Add support for a UEFI variable filesystem")
dated Oct 5, 2012, introduced a new efivarfs pseudo-filesystem to
replace the efivars sysfs interface that was used up to that point to
expose EFI variables to user space.
The main problem with the sysfs interface was that it only supported up
to 1024 bytes of payload per file, whereas the underlying variables
themselves are only bounded by a platform specific per-variable and
global limit that is typically much higher than 1024 bytes.
The deprecated sysfs interface is only enabled on x86 and Itanium, other
EFI enabled architectures only support the efivarfs pseudo-filesystem.
So let's finally rip off the band aid, and drop the old interface
entirely. This will make it easier to refactor and clean up the
underlying infrastructure that is shared between efivars, efivarfs and
efi-pstore, and is long overdue for a makeover.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Avoid the efivars layer and simply call the newly introduced EFI
varstore helpers instead. This simplifies the code substantially, and
also allows us to remove some hacks in the shared efivars layer that
were added for efi-pstore specifically.
In order to be able to delete the EFI variable associated with a record,
store the UTF-16 name of the variable in the pstore record's priv field.
That way, we don't have to make guesses regarding which variable the
record may have been loaded from.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The current efivars layer is a jumble of list iterators, shadow data
structures and safe variable manipulation helpers that really belong in
the efivarfs pseudo file system once the obsolete sysfs access method to
EFI variables is removed.
So split off a minimal efivar get/set variable API that reuses the
existing efivars_lock semaphore to mediate access to the various runtime
services, primarily to ensure that performing a SetVariable() on one CPU
while another is calling GetNextVariable() in a loop to enumerate the
contents of the EFI variable store does not result in surprises.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Even though the efivars_lock lock is documented as protecting the
efivars->ops pointer (among other things), efivar_init() happily
releases and reacquires the lock for every EFI variable that it
enumerates. This used to be needed because the lock was originally a
spinlock, which prevented the callback that is invoked for every
variable from being able to sleep. However, releasing the lock could
potentially invalidate the ops pointer, but more importantly, it might
allow a SetVariable() runtime service call to take place concurrently,
and the UEFI spec does not define how this affects an enumeration that
is running in parallel using the GetNextVariable() runtime service,
which is what efivar_init() uses.
In the meantime, the lock has been converted into a semaphore, and the
only reason we need to drop the lock is because the efivarfs pseudo
filesystem driver will otherwise deadlock when it invokes the efivars
API from the callback to create the efivar_entry items and insert them
into the linked list. (EFI pstore is affected in a similar way)
So let's switch to helpers that can be used while the lock is already
taken. This way, we can hold on to the lock throughout the enumeration.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The EFI pstore backend will need to store per-record variable name data
when we switch away from the efivars layer. Add a priv field to struct
pstore_record, and document it as holding a backend specific pointer
that is assumed to be a kmalloc()d buffer, and will be kfree()d when the
entire record is freed.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Series fixing issues with sysfs locking and name reuse (Christoph)
- NVMe pull request via Christoph:
- Fix the mixed up CRIMS/CRWMS constants (Joel Granados)
- Add another broken identifier quirk (Leo Savernik)
- Fix up a quirk because Samsung reuses PCI IDs over different
products (Christoph Hellwig)
- Remove old WARN_ON() that doesn't apply anymore (Li)
- Fix for using a stale cached request value for rq-qos throttling
mechanisms that may schedule(), like iocost (me)
- Remove unused parameter to blk_independent_access_range() (Damien)
* tag 'block-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
block: remove WARN_ON() from bd_link_disk_holder
nvme: move the Samsung X5 quirk entry to the core quirks
nvme: fix the CRIMS and CRWMS definitions to match the spec
nvme: add a bogus subsystem NQN quirk for Micron MTFDKBA2T0TFH
block: pop cached rq before potentially blocking rq_qos_throttle()
block: remove queue from struct blk_independent_access_range
block: freeze the queue earlier in del_gendisk
block: remove per-disk debugfs files in blk_unregister_queue
block: serialize all debugfs operations using q->debugfs_mutex
block: disable the elevator int del_gendisk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk kernel thread revert from Petr Mladek:
"Revert printk console kthreads.
The testing of 5.19 release candidates revealed issues that did not
happen when all consoles were serialized using the console semaphore.
More time is needed to check expectations of the existing console
drivers and be confident that they can be safely used in parallel"
* tag 'printk-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
Revert "printk: add functions to prefer direct printing"
Revert "printk: add kthread console printers"
Revert "printk: extend console_lock for per-console locking"
Revert "printk: remove @console_locked"
Revert "printk: Block console kthreads when direct printing will be required"
Revert "printk: Wait for the global console lock when the system is going down"
|
|
Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Message-Id: <20220523190327.2658-1-vineeth@bitbyteword.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add dma_release_coherent_memory to DMA API to allow dma
user call it to release dev->dma_mem when the device is
removed.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220422062436.14384-2-mark-pk.tsai@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Thanks to the recent commit 0a97953fd221 ("lib: add
bitmap_{from,to}_arr64") now we can directly convert a U64 value into a
bitmap and vice verse.
However when checking the header there is duplicated helper for
bitmap_to_arr64(), but no bitmap_from_arr64().
Just fix the copy-n-paste error.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
We no longer need to acquire mrt_lock() in mr_dump,
using rcu_read_lock() is enough.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will soon use RCU instead of rwlock in ipmr & ip6mr
This preliminary patch adds proper rcu verbs to read/write
(struct vif_device)->dev
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at
declaration time rather than being fixed for all declarations. This will
be used in a follow-up commit to declare an cache in x86 with a capacity
of 512+ objects without having to increase the capacity of all caches in
KVM.
This change requires each cache now specify its capacity at runtime,
since the cache struct itself no longer has a fixed capacity known at
compile time. To protect against someone accidentally defining a
kvm_mmu_memory_cache struct directly (without the extra storage), this
commit includes a WARN_ON() in kvm_mmu_topup_memory_cache().
In order to support different capacities, this commit changes the
objects pointer array to be dynamically allocated the first time the
cache is topped-up.
While here, opportunistically clean up the stack-allocated
kvm_mmu_memory_cache structs in riscv and arm64 to use designated
initializers.
No functional change intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-22-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit dfd5e3f5fe27 ("locking/lockdep: Mark local_lock_t") added yet
another lockdep_init_map_*() variant, but forgot to update all the
existing users of the most complicated version.
This could lead to a loss of lock_type and hence an incorrect report.
Given the relative rarity of both local_lock and these annotations,
this is unlikely to happen in practise, still, best fix things.
Fixes: dfd5e3f5fe27 ("locking/lockdep: Mark local_lock_t")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YqyEDtoan20K0CVD@worktop.programming.kicks-ass.net
|
|
Instead of defaulting to patching NOP opcodes at init time, and leaving
it to the architectures to override this if this is not needed, switch
to a model where doing nothing is the default. This is the common case
by far, as only MIPS requires NOP patching at init time. On all other
architectures, the correct encodings are emitted by the compiler and so
no initial patching is needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220615154142.1574619-4-ardb@kernel.org
|
