| Age | Commit message (Collapse) | Author |
|---|
|
When building with CONFIG_UBSAN_TRAP=y on arm64, Clang encodes the UBSAN
check (handler) type in the esr. Extract this and actually report these
traps as coming from the specific UBSAN check that tripped.
Before:
Internal error: BRK handler: 00000000f20003e8 [#1] PREEMPT SMP
After:
Internal error: UBSAN: shift out of bounds: 00000000f2005514 [#1] PREEMPT SMP
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In commit 286c0e09e8e0 ("can: bittiming: can_changelink() pass extack
down callstack") a new parameter was added to can_calc_bittiming(),
however the static inline no-op (which is used if
CONFIG_CAN_CALC_BITTIMING is disabled) wasn't converted.
Add the new parameter to the static inline no-op of
can_calc_bittiming().
Fixes: 286c0e09e8e0 ("can: bittiming: can_changelink() pass extack down callstack")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/20230207201734.2905618-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Consolidate the code that computes the flags to be used when creating a
device link from a fwnode link.
Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-8-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To improve detection and handling of dependency cycles, we need to be
able to mark fwnode links as being part of cycles. fwnode links marked
as being part of a cycle should not block their consumers from probing.
Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-7-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fw_devlink uses DL_FLAG_SYNC_STATE_ONLY device link flag for two
purposes:
1. To allow a parent device to proxy its child device's dependency on a
supplier so that the supplier doesn't get its sync_state() callback
before the child device/consumer can be added and probed. In this
usage scenario, we need to ignore cycles for ensure correctness of
sync_state() callbacks.
2. When there are dependency cycles in firmware, we don't know which of
those dependencies are valid. So, we have to ignore them all wrt
probe ordering while still making sure the sync_state() callbacks
come correctly.
However, when detecting dependency cycles, there can be multiple
dependency cycles between two devices that we need to detect. For
example:
A -> B -> A and A -> C -> B -> A.
To detect multiple cycles correct, we need to be able to differentiate
DL_FLAG_SYNC_STATE_ONLY device links used for (1) vs (2) above.
To allow this differentiation, add a DL_FLAG_CYCLE that can be use to
mark use case (2). We can then use the DL_FLAG_CYCLE to decide which
DL_FLAG_SYNC_STATE_ONLY device links to follow when looking for
dependency cycles.
Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The LAN8841 is completely integrated triple-speed (10BASE-T/ 100BASE-TX/
1000BASE-T) Ethernet physical layer transceivers for transmission and
reception of data on standard CAT-5, as well as CAT-5e and CAT-6,
unshielded twisted pair (UTP) cables.
The LAN8841 offers the industry-standard GMII/MII as well as the RGMII.
Some of the features of the PHY are:
- Wake on LAN
- Auto-MDIX
- IEEE 1588-2008 (V2)
- LinkMD Capable diagnosis
Currently the patch offers support only for link configuration.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that fscrypt_add_test_dummy_key() is only called by
setup_file_encryption_key() and not by the individual filesystems,
un-export it. Also change its prototype to take the
fscrypt_key_specifier directly, as the caller already has it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-6-ebiggers@kernel.org
|
|
Currently, each core device has VF pages counter which stores number of
fw pages used by its VFs and SFs.
The current design led to a hang when performing firmware reset on DPU,
where the DPU PFs stalled in sriov unload flow due to waiting on release
of SFs pages instead of waiting on only VFs pages.
Thus, Add a separate counter for SF firmware pages, which will prevent
the stall scenario described above.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, an independent page counter is used for tracking memory usage
for each function type such as VF, PF and host PF (DPU).
For better code-readibilty, use a single array that stores
the number of allocated memory pages for each function type.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The recently introduced sched_numa_hop_mask() exposes cpumasks of CPUs
reachable within a given distance budget, wrap the logic for iterating over
all (distance, mask) values inside an iterator macro.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq has pointed out that drivers allocating IRQ vectors would benefit
from having smarter NUMA-awareness - cpumask_local_spread() only knows
about the local node and everything outside is in the same bucket.
sched_domains_numa_masks is pretty much what we want to hand out (a cpumask
of CPUs reachable within a given distance budget), introduce
sched_numa_hop_mask() to export those cpumasks.
Link: http://lore.kernel.org/r/20220728191203.4055-1-tariqt@nvidia.com
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function finds Nth set CPU in a given cpumask starting from a given
node.
Leveraging the fact that each hop in sched_domains_numa_masks includes the
same or greater number of CPUs than the previous one, we can use binary
search on hops instead of linear walk, which makes the overall complexity
of O(log n) in terms of number of cpumask_weight() calls.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce cpumask_nth_and_andnot() based on find_nth_and_andnot_bit().
It's used in the following patch to traverse cpumasks without storing
intermediate result in temporary cpumask.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the following patches the function is used to implement in-place bitmaps
traversing without storing intermediate result in temporary bitmaps.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")
changed kvm->vcpus array to a xarray, so update the code comment of
kvm_vcpu->vcpu_idx accordingly.
Signed-off-by: Wang Yong <yongw.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230202081342.856687-1-yongw.kernel@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In case a new string DB is added to the FW, the FW publishes an event
notifying the strings DB have updated.
Add support in driver for handling this event.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Commit 90e7cb78b815 ("net/mlx5: fix missing mutex_unlock in
mlx5_fw_fatal_reporter_err_work()") introduced another checking of
MLX5_DROP_HEALTH_NEW_WORK. At this point, the first check of
MLX5_DROP_HEALTH_NEW_WORK is redundant and so is the lock that
protects it.
Remove the lock and rename MLX5_DROP_HEALTH_NEW_WORK to reflect these
changes.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add missing xdp_features field description in the struct net_device
documentation. This patch fix the following warning:
[...]
./include/linux/netdevice.h:2375: warning: Function parameter or member 'xdp_features' not described in 'net_device'
[...]
Fixes: d3d854fd6a1d ("netdev-genl: create a simple family for netdev stuff")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7878544903d855b49e838c9d59f715bde0b5e63b.1675705948.git.lorenzo@kernel.org
|
|
Merge the general CXL updates with fixes targeting v6.2-rc for v6.3.
Resolve a conflict with the fix and move of cxl_report_and_clear() from
pci.c to core/pci.c.
|
|
We have many places using this expression:
SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
Use of SKB_HEAD_ALIGN() will allow to clean them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a generic trace_array_puts() that can be used to "trace_puts()" into
an allocated trace_array instance. This is just another variant of
trace_array_printk().
Link: https://lkml.kernel.org/r/20230207173026.584717290@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
there is one dwc3 trace event declare as below,
DECLARE_EVENT_CLASS(dwc3_log_event,
TP_PROTO(u32 event, struct dwc3 *dwc),
TP_ARGS(event, dwc),
TP_STRUCT__entry(
__field(u32, event)
__field(u32, ep0state)
__dynamic_array(char, str, DWC3_MSG_MAX)
),
TP_fast_assign(
__entry->event = event;
__entry->ep0state = dwc->ep0state;
),
TP_printk("event (%08x): %s", __entry->event,
dwc3_decode_event(__get_str(str), DWC3_MSG_MAX,
__entry->event, __entry->ep0state))
);
the problem is when trace function called, it will allocate up to
DWC3_MSG_MAX bytes from trace event buffer, but never fill the buffer
during fast assignment, it only fill the buffer when output function are
called, so this means if output function are not called, the buffer will
never used.
add __get_buf(len) which acquiree buffer from iter->tmp_seq when trace
output function called, it allow user write string to acquired buffer.
the mentioned dwc3 trace event will changed as below,
DECLARE_EVENT_CLASS(dwc3_log_event,
TP_PROTO(u32 event, struct dwc3 *dwc),
TP_ARGS(event, dwc),
TP_STRUCT__entry(
__field(u32, event)
__field(u32, ep0state)
),
TP_fast_assign(
__entry->event = event;
__entry->ep0state = dwc->ep0state;
),
TP_printk("event (%08x): %s", __entry->event,
dwc3_decode_event(__get_buf(DWC3_MSG_MAX), DWC3_MSG_MAX,
__entry->event, __entry->ep0state))
);.
Link: https://lore.kernel.org/linux-trace-kernel/1675065249-23368-1-git-send-email-quic_linyyuan@quicinc.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, the host driver doesn't have any method to identify if the
requested perf event is from kvm or bare metal. As KVM runs in HS
mode, there are no separate hypervisor privilege mode to distinguish
between the attributes for guest/host.
Improve the privilege mode filtering by using the event specific
config1 field.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM module needs to know how many hardware counters and the counter
width that the platform supports. Otherwise, it will not be able to show
optimal value of virtual counters to the guest. The virtual hardware
counters also need to have the same width as the logical hardware
counters for simplicity. However, there shouldn't be mapping between
virtual hardware counters and logical hardware counters. As we don't
support hetergeneous harts or counters with different width as of now,
the implementation relies on the counter width of the first available
programmable counter.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-02-06
this is a pull request of 47 patches for net-next/master.
The first two patch is by Oliver Hartkopp. One adds missing error
checking to the CAN_GW protocol, the other adds a missing CAN address
family check to the CAN ISO TP protocol.
Thomas Kopp contributes a performance optimization to the mcp251xfd
driver.
The next 11 patches are by Geert Uytterhoeven and add support for
R-Car V4H systems to the rcar_canfd driver.
Stephane Grosjean and Lukas Magel contribute 8 patches to the peak_usb
driver, which add support for configurable CAN channel ID.
The last 17 patches are by me and target the CAN bit timing
configuration. The bit timing is cleaned up, error messages are
improved and forwarded to user space via NL_SET_ERR_MSG_FMT() instead
of netdev_err(), and the SJW handling is updated, including the
definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
* tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (47 commits)
can: bittiming: can_validate_bitrate(): report error via netlink
can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: bittiming: can_calc_bittiming(): clean up SJW handling
can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW
can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment
can: bittiming: can_sjw_check(): report error via netlink and harmonize error value
can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value
can: bittiming: factor out can_sjw_set_default() and can_sjw_check()
can: bittiming: can_changelink() pass extack down callstack
can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: netlink: can_validate(): validate sample point for CAN and CAN-FD
can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided
can: dev: register_candev(): ensure that bittiming const are valid
can: bittiming: can_get_bittiming(): use direct return and remove unneeded else
can: bittiming: can_fixup_bittiming(): set effective tq
can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1
can: bittiming(): replace open coded variants of can_bit_time()
can: peak_usb: Reorder include directives alphabetically
can: peak_usb: align CAN channel ID format in log with sysfs attribute
can: peak_usb: export PCAN CAN channel ID as sysfs device attribute
...
====================
Link: https://lore.kernel.org/r/20230206131620.2758724-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch passes the full response so that the audit function can use all
of it. The audit function was updated to log the additional information in
the AUDIT_FANOTIFY record.
Currently the only type of fanotify info that is defined is an audit
rule number, but convert it to hex encoding to future-proof the field.
Hex encoding suggested by Paul Moore <paul@paul-moore.com>.
The {subj,obj}_trust values are {0,1,2}, corresponding to no, yes, unknown.
Sample records:
type=FANOTIFY msg=audit(1600385147.372:590): resp=2 fan_type=1 fan_info=3137 subj_trust=3 obj_trust=5
type=FANOTIFY msg=audit(1659730979.839:284): resp=1 fan_type=0 fan_info=0 subj_trust=2 obj_trust=2
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Link: https://lore.kernel.org/r/3075502.aeNJFYEL58@x2
Tested-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <bcb6d552e517b8751ece153e516d8b073459069c.1675373475.git.rgb@redhat.com>
|
|
This patch adds a flag, FAN_INFO and an extensible buffer to provide
additional information about response decisions. The buffer contains
one or more headers defining the information type and the length of the
following information. The patch defines one additional information
type, FAN_RESPONSE_INFO_AUDIT_RULE, to audit a rule number. This will
allow for the creation of other information types in the future if other
users of the API identify different needs.
The kernel can be tested if it supports a given info type by supplying
the complete info extension but setting fd to FAN_NOFD. It will return
the expected size but not issue an audit record.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Link: https://lore.kernel.org/r/2745105.e9J7NaK4W3@x2
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201001101219.GE17860@quack2.suse.cz
Tested-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <10177cfcae5480926b7176321a28d9da6835b667.1675373475.git.rgb@redhat.com>
|
|
The user space API for the response variable is __u32. This patch makes
sure that the whole path through the kernel uses u32 so that there is
no sign extension or truncation of the user space response.
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Link: https://lore.kernel.org/r/12617626.uLZWGnKmhe@x2
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Tested-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <3778cb0b3501bc4e686ba7770b20eb9ab0506cf4.1675373475.git.rgb@redhat.com>
|
|
Attach any arbitrary strings that are defined to the composite dev.
We handle the old-style manufacturer, product and serialnumbers
strings in the same function for simplicity.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-8-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a framework to allow users to define arbitrary string descriptors
for a USB Gadget. This is modelled as a new type of config item rather
than as hardcoded attributes so as to be as flexible as possible.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-7-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new function to add exactly one cell. This will be used by the
nvmem layout drivers to add custom cells. In contrast to the
nvmem_add_cells(), this has the advantage that we don't have to assemble
a list of cells on runtime.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-16-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct nvmem_cell_info is used to describe a cell. Thus this should
really be in the nvmem-provider's header. There are two (unused) nvmem
access methods which use the nvmem_cell_info to describe the cell to be
accesses. One can argue, that they will create a cell before accessing,
thus they are both a provider and a consumer.
struct nvmem_cell_info will get used more and more by nvmem-providers,
don't force them to also include the consumer header, although they are
not.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sometimes a cell can represend multiple values. For example, a base
ethernet address stored in the NVMEM can be expanded into multiple
discreet ones by adding an offset.
For this use case, introduce an index parameter which is then used to
distiguish between values. This parameter will then be passed to the
post process hook which can then use it to create different values
during reading.
At the moment, there is only support for the device tree path. You can
add the index to the phandle, e.g.
&net {
nvmem-cells = <&base_mac_address 2>;
nvmem-cell-names = "mac-address";
};
&nvmem_provider {
base_mac_address: base-mac-address@0 {
#nvmem-cell-cells = <1>;
reg = <0 6>;
};
};
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new variant of the of_parse_phandle_with_args() which treats the
cells name as optional. If it's missing, it is assumed that the phandle
has no arguments.
Up until now, a nvmem node didn't have any arguments, so all the device
trees haven't any '#*-cells' property. But there is a need for an
additional argument for the phandle, for which we need a '#*-cells'
property. Therefore, we need to support nvmem nodes with and without
this property.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a helper to add an offset to a ethernet address. This comes in handy
if you have a base ethernet address for multiple interfaces.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230204-kobj_type-of-v1-1-5910c8ecb7a3@weissschuh.net
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Previously the documentation existed only in Documentation/livepatch
directory.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The cross-release bits have been removed, lockdep_init_map_crosslock() is
a leftover.
Remove lockdep_init_map_crosslock.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20220311164457.46461-1-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/YqITgY+2aPITu96z@linutronix.de
|
|
The custom "debug" module parameter is fairly inflexible.
It can only manage debugging for all calls dbg_hid() at the same time.
Furthermore it creates a mismatch between calls to hid_dbg() which can
be managed by CONFIG_DYNAMIC_DEBUG and dbg_hid() which is managed by the
module parameter.
Furthermore the change to pr_debug() allows the debugging statements to
be completely compiled-out if desired.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20221223-hid-dbg-v1-1-5dcf8794f7f9@weissschuh.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
Factor out the functionality of assigning a SJW default value into
can_sjw_set_default() and the checking the SJW limits into
can_sjw_check().
This functions will be improved and called from a different function
in the following patches.
Link: https://lore.kernel.org/all/20230202110854.2318594-11-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is a preparation patch.
In order to pass warning/error messages during netlink calls back to
user space, pass the extack struct down the callstack of
can_changelink(), the actual error messages will be added in the
following ptaches.
Link: https://lore.kernel.org/all/20230202110854.2318594-10-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add interface to get resources and platform data. This will avoid code
duplication. These interfaces includes:
- Get resource count
- Get resource at an index
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-7-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There is one Intel Out-of-Band (OOB) PCI device per CPU package. Since
TPMI feature is exposed via OOB PCI device, there will be multiple
TPMI device instances on a multi CPU package system.
There are several PM features, which needs to associate APIC based CPU
package ID information to a TPMI instance. For example if Intel Speed
Select feature requires control of a CPU package, it needs to identify
right TPMI device instance.
There is one special TPMI ID (ID = 0x81) in the PFS. The MMIO
region of this TPMI ID points to a mapping table:
- PCI Bus ID
- PCI Device ID
- APIC based Package ID
This mapping information can be used by any PM feature driver which
requires mapping from a CPU package to a TPMI device instance.
Unlike other TPMI features, device node is not created for this feature
ID (0x81). Instead store the mapping information as platform data, which
is part of the per PCI device TPMI instance (struct intel_tpmi_info).
Later the TPMI feature drivers can get the mapping information using an
interface "tpmi_get_platform_data()"
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-6-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
into soc/drivers
Apple SoC RTKit/PMGR updates for 6.3.
This time around we have a PMGR change to allow IRQ-safe usage, RTKit
crash register dump decoding, and a bunch of RTKit API changes used by
upcoming drivers.
* tag 'asahi-soc-rtkit-pmgr-6.3' of https://github.com/AsahiLinux/linux:
soc: apple: rtkit: Add register dump decoding to crashlog
soc: apple: rtkit: Export non-devm init/free functions
soc: apple: rtkit: Add a private pointer to apple_rtkit_shmem
soc: apple: apple-pmgr-pwrstate: Switch to IRQ-safe mode
soc: apple: rtkit: Add apple_rtkit_idle() function
Link: https://lore.kernel.org/r/4790bdc4-b6e2-228b-771f-023363f65fb3@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
First user of skb_poison_list is in kfree_skb_list_reason, to catch bugs
earlier like introduced in commit eedade12f4cb ("net: kfree_skb_list use
kmem_cache_free_bulk"). For completeness mentioned bug have been fixed in
commit f72ff8b81ebc ("net: fix kfree_skb_list use of skb_mark_not_on_list").
In case of a bug like mentioned commit we would have seen OOPS with:
general protection fault, probably for non-canonical address 0xdead000000000870
And content of one the registers e.g. R13: dead000000000800
In this case skb->len is at offset 112 bytes (0x70) why fault happens at
0x800+0x70 = 0x870
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added documentation to new struct members for WebUSB:
* bcd_webusb_version
* b_webusb_vendor_code
* landing_page
* use_webusb
to avoid warnings in the build of htmldocs
Fixes: 93c473948c58 ("usb: gadget: add WebUSB landing page support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jó Ágila Bitsch <jgilab@gmail.com>
Link: https://lore.kernel.org/r/Y95MRZZz3yC5lETB@jo-einhundert
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char-misc driver fixes in here as other patches depend on
them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here, and this resolves a merge conflict with
the i915 driver as reported in linux-next
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/whatever driver fixes. They
include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer)
All have been in linux-next with no reported problems"
* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
nvmem: qcom-spmi-sdam: fix module autoloading
nvmem: core: fix return value
nvmem: core: fix cell removal on error
nvmem: core: fix device node refcounting
nvmem: core: fix registration vs use race
nvmem: core: fix cleanup after dev_set_name()
nvmem: core: remove nvmem_config wp_gpio
nvmem: core: initialise nvmem->id early
nvmem: sunxi_sid: Always use 32-bit MMIO reads
nvmem: brcm_nvram: Add check for kzalloc
iio: imu: fxos8700: fix MAGN sensor scale and unit
iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
iio: imu: fxos8700: fix failed initialization ODR mode assignment
iio: imu: fxos8700: fix incorrect ODR mode readback
iio: light: cm32181: Fix PM support on system with 2 I2C resources
iio: hid: fix the retval in gyro_3d_capture_sample
iio: hid: fix the retval in accel_3d_capture_sample
iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
...
|
