summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2023-01-31cc2520: move to gpio descriptorsArnd Bergmann
cc2520 supports both probing from static platform_data and from devicetree, but there have never been any definitions of the platform data in the mainline kernel, so it's safe to assume that only the DT path is used. After folding cc2520_platform_data into the driver itself, the GPIO handling can be simplified by moving to the modern gpiod interface. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230126161658.2983292-1-arnd@kernel.org Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-01-30net/mlx5: Prepare for fast crypto key update if hardware supports itJianbo Liu
Add CAP for crypto offload, do the simple initialization if hardware supports it. Currently set log_dek_obj_range to 12, so 4k DEKs will be created in one bulk allocation. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-30net/mlx5: Change key type to key purposeJianbo Liu
Change the naming of key type in DEK fields and macros, to be consistent with the device spec. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-30net/mlx5: Add IFC bits and enums for crypto keyJianbo Liu
Add and extend structure layouts and defines for fast crypto key update. This is a prerequisite to support bulk creation, key modification and destruction, software wrapped DEK, and SYNC_CRYPTO command. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-30net/mlx5: Add IFC bits for general obj create paramJianbo Liu
Before this patch, the log_obj_range was defined inside general_obj_in_cmd_hdr to support bulk allocation. However, we need to modify/query one of the object in the bulk in later patch, so change those fields to param bits for parameters specific for cmd header, and add general_obj_create_param according to what was updated in spec. We will also add general_obj_query_param for modify/query later. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-31ata: pata_parport: add driver (PARIDE replacement)Ondrej Zary
The pata_parport is a libata-based replacement of the old PARIDE subsystem - driver for parallel port IDE devices. It uses the original paride low-level protocol drivers but does not need the high-level drivers (pd, pcd, pf, pt, pg). The IDE devices behind parallel port adapters are handled by the ATA layer. This will allow paride and its high-level drivers to be removed. Unfortunately, libata drivers cannot sleep so pata_parport claims parport before activating the ata host and keeps it claimed (and protocol connected) until the ata host is removed. This means that no devices can be chained (neither other pata_parport devices nor a printer). paride and pata_parport are mutually exclusive because the compiled protocol drivers are incompatible. Tested with: - Imation SuperDisk LS-120 and HP C4381A (EPAT) - Freecom Parallel CD (FRPW) - Toshiba Mobile CD-RW 2793008 w/Freecom Parallel Cable rev.903 (FRIQ) - Backpack CD-RW 222011 and CD-RW 19350 (BPCK6) The following bugs in low-level protocol drivers were found and will be fixed later: Note: EPP-32 mode is buggy in EPAT - and also in all other protocol drivers - they don't handle non-multiple-of-4 block transfers correctly. This causes problems with LS-120 drive. There is also another bug in EPAT: EPP modes don't work unless a 4-bit or 8-bit mode is used first (probably some initialization missing?). Once the device is initialized, EPP works until power cycle. So after device power on, you have to: echo "parport0 epat 0" >/sys/bus/pata_parport/new_device echo pata_parport.0 >/sys/bus/pata_parport/delete_device echo "parport0 epat 4" >/sys/bus/pata_parport/new_device (autoprobe will initialize correctly as it tries the slowest modes first but you'll get the broken EPP-32 mode) Note: EPP modes are buggy in FRPW, only modes 0 and 1 work. Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2023-01-30Merge tag 'intel-pinctrl-v6.3-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.3-1 * Add ~4kOhm bias support to Intel pin control drivers * Convert Intel pin control drivers to use INTEL_COMMUNITY_*() * Add struct pinfunction and use it in Intel pin control drivers * Make pin control documentation up to date * Miscellaneous cleanups The following is an automated git shortlog grouped by driver: pinctrl: - Proofreading and updating the documentation accordingly - Proofreading and updating the documentation (part 2) alderlake: - Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS() baytrail: - Convert to use new memeber in struct intel_function broxton: - Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE() cannonlake: - Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS() cedarfork: - Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS() cherryview: - Convert to use new memeber in struct intel_function denverton: - Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS() elkhartlake: - Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS() emmitsburg: - Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS() geminilake: - Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE() icelake: - Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS() intel: - Get rid of unused members in struct intel_function - Make use of struct pinfunction and PINCTRL_PINFUNCTION() - Define maximum pad number in the group - Use same order of bit fields for PADCFG2 - Add ~4k bias support - Add definitions to all possible biases - Deduplicate some code in intel_config_set_pull() - Add default case to intel_config_set_pull() - Convert to generic_handle_domain_irq() - Always use gpp_num_padown_regs in the main driver - Introduce INTEL_COMMUNITY_*() to unify community macros Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro: - Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro jasperlake: - Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS() lakefield: - Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS() lewisburg: - Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE() lynxpoint: - Convert to use new memeber in struct intel_function merrifield: - Convert to use new memeber in struct intel_function meteorlake: - Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS() moorefield: - Convert to use new memeber in struct intel_function sunrisepoint: - Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*() tigerlake: - Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
2023-01-30Merge branch 'iommu-memory-accounting' of ↵Jason Gunthorpe
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu intoiommufd/for-next Jason Gunthorpe says: ==================== iommufd follows the same design as KVM and uses memory cgroups to limit the amount of kernel memory a iommufd file descriptor can pin down. The various internal data structures already use GFP_KERNEL_ACCOUNT to charge its own memory. However, one of the biggest consumers of kernel memory is the IOPTEs stored under the iommu_domain and these allocations are not tracked. This series is the first step in fixing it. The iommu driver contract already includes a 'gfp' argument to the map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then having the driver allocate the IOPTE tables with that flag will capture a significant amount of the allocations. Update the iommu_map() API to pass in the GFP argument, and fix all call sites. Replace iommu_map_atomic(). Audit the "enterprise" iommu drivers to make sure they do the right thing. Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are already correct. A follow up series will be needed to capture the allocations made when the iommu_domain itself is allocated, which will complete the job. ==================== * 'iommu-memory-accounting' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/s390: Use GFP_KERNEL in sleepable contexts iommu/s390: Push the gfp parameter to the kmem_cache_alloc()'s iommu/intel: Use GFP_KERNEL in sleepable contexts iommu/intel: Support the gfp argument to the map_pages op iommu/intel: Add a gfp parameter to alloc_pgtable_page() iommufd: Use GFP_KERNEL_ACCOUNT for iommu_map() iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous() iommu: Add a gfp parameter to iommu_map_sg() iommu: Remove iommu_map_atomic() iommu: Add a gfp parameter to iommu_map() Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-01-30mtd: spinand: Add support for AllianceMemory AS5F34G04SNDMario Kicherer
Add support for AllianceMemory AS5F34G04SND SPI NAND flash Datasheet: - https://www.alliancememory.com/wp-content/uploads/pdf/flash/AllianceMemory_SPI_NAND_Flash_July2020_Rev1.0.pdf Signed-off-by: Mario Kicherer <dev@kicherer.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230126144050.2656358-1-dev@kicherer.org
2023-01-30pwm: Move pwm_capture() dummy to restore orderGeert Uytterhoeven
Move the dummy pwm_capture(), to make the declaration order of all dummies to match the declaration order of the real functions. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-01-30PM / devfreq: Fix build issues with devfreq disabledRob Clark
The existing no-op shims for when PM_DEVFREQ (or an individual governor) only do half the job. The governor specific config/tuning structs need to be available to avoid compile errors in drivers using devfreq. Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs") Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Patchwork: https://patchwork.freedesktop.org/patch/519801/ Link: https://lore.kernel.org/r/20230123153745.3185032-1-robdclark@gmail.com
2023-01-30gpiolib: of: Move enum of_gpio_flags to its only userAndy Shevchenko
GPIO library for OF is the only user for enum of_gpio_flags. Move it there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpio: pcf857x: Get rid of legacy platform dataAndy Shevchenko
Platform data is a legacy interface to supply device properties to the driver. In this case we don't have in-kernel users for it. Moreover it uses plain GPIO numbers which is no-no for a new code. Just remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpio: Remove unused and obsoleted irq_to_gpio()Andy Shevchenko
irq_to_gpio() is legacy and unused API, remove it for good. This leaves gpio_to_irq() as it's used yet in many places. Nevertheless, removal of its counterpart is a good signal to whoever even trying to consider using them that do not. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: Remove unused of_mm_gpiochip_add()Andy Shevchenko
of_mm_gpiochip_add() is unused API, remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: Do not mention legacy API in the codeAndy Shevchenko
Replace mentioning of legacy API by the latest one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: Get rid of not used of_node memberAndy Shevchenko
All new drivers should use fwnode and / or parent to provide the necessary information to the GPIO library. Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpio: Remove unused and obsoleted gpio_export_link()Andy Shevchenko
gpio_export_link() is legacy and unused API, remove it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: of: remove [devm_]gpiod_get_from_of_node() APIsDmitry Torokhov
Now that everyone is using [devm_]fwnode_gpiod_get[_index]() APIs, remove OF-specific [devm_]gpiod_get_from_of_node(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: of: remove of_get_gpio[_flags]() and of_get_named_gpio_flags()Dmitry Torokhov
There are no more users of these APIs in the mainline kernel, remove them. This leaves of_get_named_gpio() as the only legacy OF-specific API. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: of: stop exporting of_gpio_named_count()Dmitry Torokhov
The only user of this function is gpiolib-of.c so move it there. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30gpiolib: of: remove of_gpio_count()Dmitry Torokhov
There are no more users of of_gpio_count() in the mainline kernel, remove it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30efi/libstub: Add memory attribute protocol definitionsEvgeniy Baskov
EFI_MEMORY_ATTRIBUTE_PROTOCOL servers as a better alternative to DXE services for setting memory attributes in EFI Boot Services environment. This protocol is better since it is a part of UEFI specification itself and not UEFI PI specification like DXE services. Add EFI_MEMORY_ATTRIBUTE_PROTOCOL definitions. Support mixed mode properly for its calls. Tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Evgeniy Baskov <baskov@ispras.ru> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-01-30fpga: m10bmc-sec: Add support for N6000Ilpo Järvinen
Add support for PMCI-based flash access path and N6000 sec update support. Access to flash staging area is different for N6000 from that of the SPI interfaced counterparts. Introduce intel_m10bmc_flash_bulk_ops to allow interface specific differentiations for the flash access path for sec update and make m10bmc_sec_read/write() in sec update driver to use the new operations. The .flash_mutex serializes read/read. Flash update (erase+write) must use ->lock/unlock_write() to prevent reads during update (reads would timeout on setting flash MUX as BMC will prevent it). Create a type specific RSU status reg handler for N6000 because the field has moved from doorbell to auth result register. If a failure is detected while altering the flash MUX, it seems safer to try to set it back and doesn't seem harmful. Likely there are enough troubles in that case anyway so setting it back fails too (which is harmless sans the small extra delay) or just confirms that the value wasn't changed. Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com> Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com> Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230116100845.6153-12-ilpo.jarvinen@linux.intel.com
2023-01-30leds: Move led_init_default_state_get() to the global headerAndy Shevchenko
There are users inside and outside LED framework that have implemented a local copy of led_init_default_state_get(). In order to deduplicate that, as the first step move the declaration from LED header to the global one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230103131256.33894-3-andriy.shevchenko@linux.intel.com
2023-01-30leds: Add missing includes and forward declarations in leds.hAndy Shevchenko
Add missing includes and forward declarations to leds.h. While at it, replace headers by forward declarations and vise versa. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230103131256.33894-2-andriy.shevchenko@linux.intel.com
2023-01-30net: stmmac: do not stop RX_CLK in Rx LPI state for qcs404 SoCAndrey Konovalov
Currently in phy_init_eee() the driver unconditionally configures the PHY to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt storm on my qcs404-base board. Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible device RX_CLK continues to run even in Rx LPI state. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-30Merge tag 'drm/tegra/for-6.3-rc1' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/tegra into drm-next drm/tegra: Changes for v6.3-rc1 This set of changes includes a rework of the custom syncpoint interrupt code to take better advantage of existing DRM/KMS infrastructure. There's also various bits of cleanup and fixes included. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127170119.495943-1-thierry.reding@gmail.com
2023-01-29s390/bpf: Implement arch_prepare_bpf_trampoline()Ilya Leoshkevich
arch_prepare_bpf_trampoline() is used for direct attachment of eBPF programs to various places, bypassing kprobes. It's responsible for calling a number of eBPF programs before, instead and/or after whatever they are attached to. Add a s390x implementation, paying attention to the following: - Reuse the existing JIT infrastructure, where possible. - Like the existing JIT, prefer making multiple passes instead of backpatching. Currently 2 passes is enough. If literal pool is introduced, this needs to be raised to 3. However, at the moment adding literal pool only makes the code larger. If branch shortening is introduced, the number of passes needs to be increased even further. - Support both regular and ftrace calling conventions, depending on the trampoline flags. - Use expolines for indirect calls. - Handle the mismatch between the eBPF and the s390x ABIs. - Sign-extend fmod_ret return values. invoke_bpf_prog() produces about 120 bytes; it might be possible to slightly optimize this, but reaching 50 bytes, like on x86_64, looks unrealistic: just loading cookie, __bpf_prog_enter, bpf_func, insnsi and __bpf_prog_exit as literals already takes at least 5 * 12 = 60 bytes, and we can't use relative addressing for most of them. Therefore, lower BPF_MAX_TRAMP_LINKS on s390x. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20230129190501.1624747-5-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-29blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and ↵Yu Kuai
blkcg_deactivate_policy() Currently parent pd can be freed before child pd: t1: remove cgroup C1 blkcg_destroy_blkgs blkg_destroy list_del_init(&blkg->q_node) // remove blkg from queue list percpu_ref_kill(&blkg->refcnt) blkg_release call_rcu t2: from t1 __blkg_release blkg_free schedule_work t4: deactivate policy blkcg_deactivate_policy pd_free_fn // parent of C1 is freed first t3: from t2 blkg_free_workfn pd_free_fn If policy(for example, ioc_timer_fn() from iocost) access parent pd from child pd after pd_offline_fn(), then UAF can be triggered. Fix the problem by delaying 'list_del_init(&blkg->q_node)' from blkg_destroy() to blkg_free_workfn(), and using a new disk level mutex to synchronize blkg_free_workfn() and blkcg_deactivate_policy(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230119110350.2287325-4-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29block: introduce bdev_zone_no helperPankaj Raghav
Add a generic bdev_zone_no() helper to calculate zone number for a given sector in a block device. This helper internally uses disk_zone_no() to find the zone number. Use the helper bdev_zone_no() to calculate nr of zones. This lets us make modifications to the math if needed in one place. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20230110143635.77300-4-p.raghav@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29block: add a new helper bdev_{is_zone_start, offset_from_zone_start}Pankaj Raghav
Instead of open coding to check for zone start, add a helper to improve readability and store the logic in one place. Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230110143635.77300-3-p.raghav@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29block: remove superfluous check for request queue in bdev_is_zoned()Pankaj Raghav
Remove the superfluous request queue check in bdev_is_zoned() as bdev_get_queue() can never return NULL. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20230110143635.77300-2-p.raghav@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: make limits unsignedChristoph Böhmwalder
These are almost always used as unsigned integers, so mark them as such. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-4-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: fix DRBD_VOLUME_MAX 65535 -> 65534Robert Altnoeder
The protocol uses -1 as a reserved value for 'no specific volume', and since the protocol field is a 16 bit unsigned value, -1 is converted to 65535. Therefore, limit the range of valid volume numbers to [0, 65534]. Signed-off-by: Robert Altnoeder <robert.altnoeder@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-3-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: adjust drbd_limits license headerChristoph Böhmwalder
See also commit 93c68cc46a07 ("drbd: use consistent license"). We only want to license drbd under GPL-2.0, so use the corresponding SPDX header consistently. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: split off drbd_config into separate fileChristoph Böhmwalder
To be more similar to what we do in the out-of-tree module and ease the upstreaming process. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123506.144082-4-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: drop API_VERSION defineChristoph Böhmwalder
Use the genetlink api version as defined in drbd_genl_api.h. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123506.144082-3-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29block: save user max_sectors limitKeith Busch
The user can set the max_sectors limit to any valid value via sysfs /sys/block/<dev>/queue/max_sectors_kb attribute. If the device limits are ever rescanned, though, the limit reverts back to the potentially artificially low BLK_DEF_MAX_SECTORS value. Preserve the user's setting as the max_sectors limit as long as it's valid. The user can reset back to defaults by writing 0 to the sysfs file. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230105205146.3610282-3-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29block: make BLK_DEF_MAX_SECTORS unsignedKeith Busch
This is used as an unsigned value, so define it that way to avoid having to cast it. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230105205146.3610282-2-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29io_uring: optimise ctx flags layoutPavel Begunkov
There may be different cost for reeading just one byte or more, so it's benificial to keep ctx flag bits that we access together in a single byte. That affected code generation of __io_cq_unlock_post_flush() and removed one memory load. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/bbe8ca4705704690319d65e45845f9fc9d35f420.1673887636.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29io_uring: add io_req_local_work_add wake fast pathPavel Begunkov
Don't wake the master task after queueing a deferred tw unless it's currently waiting in io_cqring_wait. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/717702d772825a6647e6c315b4690277ba84c3fc.1673274244.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29io_uring: add lazy poll_wq activationPavel Begunkov
Even though io_poll_wq_wake()'s waitqueue_active reuses a barrier we do for another waitqueue, it's not going to be the case in the future and so we want to have a fast path for it when the ring has never been polled. Move poll_wq wake ups into __io_commit_cqring_flush() using a new flag called ->poll_activated. The idea behind the flag is to set it when the ring was polled for the first time. This requires additional sync to not miss events, which is done here by using task_work for ->task_complete rings, and by default enabling the flag for all other types of rings. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/060785e8e9137a920b232c0c7f575b131af19cac.1673274244.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29io_uring: separate wq for ring pollingPavel Begunkov
Don't use ->cq_wait for ring polling but add a separate wait queue for it. We need it for following patches. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/dea0be0bf990503443c5c6c337fc66824af7d590.1673274244.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29io_uring: move submitter_task out of cold cachelinePavel Begunkov
->submitter_task is used somewhat more frequent now than before, i.e. for local tw enqueue and run, let's move it from the end of ctx, which is full of cold data, to the first cacheline with mostly constants. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/415ca91dc5ad1dec612b892e489cda98e1069542.1673274244.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29Merge tag 'fpga-for-v6.3-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next Xu writes: FPGA Manager changes for 6.3-rc1 Microchip: - Ivan's reliability improvements for Microchip Polarfire FPGA FPGA DFL doc: - Randy and Yilun's kernel doc fixes. The 2 patches, "fpga: dfl: more kernel-doc corrections" & "fpga: dfl: kernel-doc corrections" conflicts with Matthew's FPGA patch "fpga: dfl: add basic support for DFHv1" on tty-next. Yilun resolved the conflicts on: --branch for-next https://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga.git/ On that branch, Matthew's patch is applied first then kernel doc fixes follow. Intel m10 bmc MFD & sub devices: - Lee's topic branch merged, to support new BMC board type with new PMCI interface to host, as well as its new sub devices. Signed-off-by: Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: bridge: return errors in the show() method of the "state" attribute fpga: dfl: more kernel-doc corrections fpga: dfl: kernel-doc corrections fpga: microchip-spi: separate data frame write routine fpga: microchip-spi: rewrite status polling in a time measurable way fpga: microchip-spi: move SPI I/O buffers out of stack mfd: intel-m10-bmc: Add PMCI driver fpga: m10bmc-sec: Make rsu status type specific fpga: m10bmc-sec: Create helpers for rsu status/progress checks mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000 fpga: intel-m10-bmc: Rework flash read/write mfd: intel-m10-bmc: Support multiple CSR register layouts mfd: intel-m10-bmc: Split into core and spi specific parts mfd: intel-m10-bmc: Rename the local variables mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info mfd: intel-m10-bmc: Add missing includes to header
2023-01-28fscrypt: support decrypting data from large foliosEric Biggers
Try to make the filesystem-level decryption functions in fs/crypto/ aware of large folios. This includes making fscrypt_decrypt_bio() support the case where the bio contains large folios, and making fscrypt_decrypt_pagecache_blocks() take a folio instead of a page. There's no way to actually test this with large folios yet, but I've tested that this doesn't cause any regressions. Note that this patch just handles *decryption*, not encryption which will be a little more difficult. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20230127224202.355629-1-ebiggers@kernel.org
2023-01-28bpf: btf: Add BTF_FMODEL_SIGNED_ARG flagIlya Leoshkevich
s390x eBPF JIT needs to know whether a function return value is signed and which function arguments are signed, in order to generate code compliant with the s390x ABI. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20230128000650.1516334-26-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-28bpf: Change BPF_MAX_TRAMP_LINKS to enumIlya Leoshkevich
This way it's possible to query its value from testcases using BTF. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20230128000650.1516334-3-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-28nvmem: core: remove nvmem_config wp_gpioRussell King (Oracle)
No one provides wp_gpio, so let's remove it to avoid issues with the nvmem core putting this gpio. Cc: stable@vger.kernel.org Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 18:43:53 +0000