| Age | Commit message (Collapse) | Author |
|---|
|
Instead of calling xchg() and unrcu_pointer() before
nfsd_file_put_local(), we now pass pointer to the __rcu pointer and call
xchg() and unrcu_pointer() inside that function.
Where unrcu_pointer() is currently called the internals of "struct
nfsd_file" are not known and that causes older compilers such as gcc-8
to complain.
In some cases we have a __kernel (aka normal) pointer not an __rcu
pointer so we need to cast it to __rcu first. This is strictly a
weakening so no information is lost. Somewhat surprisingly, this cast
is accepted by gcc-8.
This has the pleasing result that the cmpxchg() which sets ro_file and
rw_file, and also the xchg() which clears them, are both now in the nfsd
code.
Reported-by: Pali Rohár <pali@kernel.org>
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Having separate nfsd_file_put and nfsd_file_put_local in struct
nfsd_localio_operations doesn't make much sense. The difference is that
nfsd_file_put doesn't drop a reference to the nfs_net which is what
keeps nfsd from shutting down.
Currently, if nfsd tries to shutdown it will invalidate the files stored
in the list from the nfs_uuid and this will drop all references to the
nfsd net that the client holds. But the client could still hold some
references to nfsd_files for active IO. So nfsd might think is has
completely shut down local IO, but hasn't and has no way to wait for
those active IO requests to complete.
So this patch changes nfsd_file_get to nfsd_file_get_local and has it
increase the ref count on the nfsd net and it replaces all calls to
->nfsd_put_file to ->nfsd_put_file_local.
It also changes ->nfsd_open_local_fh to return with the refcount on the
net elevated precisely when a valid nfsd_file is returned.
This means that whenever the client holds a valid nfsd_file, there will
be an associated count on the nfsd net, and so the count can only reach
zero when all nfsd_files have been returned.
nfs_local_file_put() is changed to call nfs_to_nfsd_file_put_local()
instead of replacing calls to one with calls to the other because this
will help a later patch which changes nfs_to_nfsd_file_put_local() to
take an __rcu pointer while nfs_local_file_put() doesn't.
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The NFS client's list of delegations can grow quite large (well beyond the
delegation watermark) if the server is revoking or there are repeated
events that expire state. Once this happens, the revoked delegations can
cause a performance problem for subsequent walks of the
servers->delegations list when the client tries to test and free state.
If we can determine that the FREE_STATEID operation has completed without
error, we can prune the delegation from the list.
Since the NFS client combines TEST_STATEID with FREE_STATEID in its minor
version operations, there isn't an easy way to communicate success of
FREE_STATEID. Rather than re-arrange quite a number of calling paths to
break out the separate procedures, let's signal the success of FREE_STATEID
by setting the stateid's type.
Set NFS4_FREED_STATEID_TYPE for stateids that have been successfully
discarded from the server, and use that type to signal that the delegation
can be cleaned up.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This implements a suggestion from Trond that we can mimic
FALLOC_FL_ZERO_RANGE by sending a compound that first does a DEALLOCATE
to punch a hole in a file, and then an ALLOCATE to fill the hole with
zeroes. There might technically be a race here, but once the DEALLOCATE
finishes any reads from the region would return zeroes anyway, so I
don't expect it to cause problems.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
When allocating space for an endpoint function on a BAR with a fixed size,
the size saved in 'struct pci_epf_bar.size' should be the fixed size as
expected by pci_epc_set_bar().
However, if pci_epf_alloc_space() increased the allocation size to
accommodate iATU alignment requirements, it previously saved the larger
aligned size in .size, which broke pci_epc_set_bar().
To solve this, keep the fixed BAR size in .size and save the aligned size
in a new .aligned_size for use when deallocating it.
Fixes: 2a9a801620ef ("PCI: endpoint: Add support to specify alignment for buffers allocated to BARs")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: commit message fixup]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[bhelgaas: more specific subject, commit log, wrap comment to match file]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250424-pci-ep-size-alignment-v5-1-2d4ec2af23f5@baylibre.com
|
|
Pull nfsd updates from Chuck Lever:
"The marquee feature for this release is that the limit on the maximum
rsize and wsize has been raised to 4MB. The default remains at 1MB,
but risk-seeking administrators now have the ability to try larger I/O
sizes with NFS clients that support them. Eventually the default
setting will be increased when we have confidence that this change
will not have negative impact.
With v6.16, NFSD now has its own debugfs file system where we can add
experimental features and make them available outside of our
development community without impacting production deployments. The
first experimental setting added is one that makes all NFS READ
operations use vfs_iter_read() instead of the NFSD splice actor. The
plan is to eventually retire the splice actor, as that will enable a
number of new capabilities such as the use of struct bio_vec from the
top to the bottom of the NFSD stack.
Jeff Layton contributed a number of observability improvements. The
use of dprintk() in a number of high-traffic code paths has been
replaced with static trace points.
This release sees the continuation of efforts to harden the NFSv4.2
COPY operation. Soon, the restriction on async COPY operations can be
lifted.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.16 development cycle"
* tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits)
xdrgen: Fix code generated for counted arrays
SUNRPC: Bump the maximum payload size for the server
NFSD: Add a "default" block size
NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
NFSD: Remove NFSD_BUFSIZE
sunrpc: Remove the RPCSVC_MAXPAGES macro
svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
sunrpc: Adjust size of socket's receive page array dynamically
SUNRPC: Remove svc_rqst :: rq_vec
SUNRPC: Remove svc_fill_write_vector()
NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
SUNRPC: Export xdr_buf_to_bvec()
NFSD: De-duplicate the svc_fill_write_vector() call sites
NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
sunrpc: Replace the rq_bvec array with dynamically-allocated memory
sunrpc: Replace the rq_pages array with dynamically-allocated memory
sunrpc: Remove backchannel check in svc_init_buffer()
sunrpc: Add a helper to derive maxpages from sv_max_mesg
svcrdma: Reduce the number of rdma_rw contexts per-QP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New ext4 features and performance improvements:
- Fast commit performance improvements
- Multi-fsblock atomic write support for bigalloc file systems
- Large folio support for regular files
This last can result in really stupendous performance for the right
workloads. For example, see [1] where the Kernel Test Robot reported
over 37% improvement on a large sequential I/O workload.
There are also the usual bug fixes and cleanups. Of note are cleanups
of the extent status tree to fix potential races that could result in
the extent status tree getting corrupted under heavy simultaneous
allocation and deallocation to a single file"
Link: https://lore.kernel.org/all/202505161418.ec0d753f-lkp@intel.com/ [1]
* tag 'ext4_for_linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (52 commits)
ext4: Add a WARN_ON_ONCE for querying LAST_IN_LEAF instead
ext4: Simplify flags in ext4_map_query_blocks()
ext4: Rename and document EXT4_EX_FILTER to EXT4_EX_QUERY_FILTER
ext4: Simplify last in leaf check in ext4_map_query_blocks
ext4: Unwritten to written conversion requires EXT4_EX_NOCACHE
ext4: only dirty folios when data journaling regular files
ext4: Add atomic block write documentation
ext4: Enable support for ext4 multi-fsblock atomic write using bigalloc
ext4: Add multi-fsblock atomic write support with bigalloc
ext4: Add support for EXT4_GET_BLOCKS_QUERY_LEAF_BLOCKS
ext4: Make ext4_meta_trans_blocks() non-static for later use
ext4: Check if inode uses extents in ext4_inode_can_atomic_write()
ext4: Document an edge case for overwrites
jbd2: remove journal_t argument from jbd2_superblock_csum()
jbd2: remove journal_t argument from jbd2_chksum()
ext4: remove sb argument from ext4_superblock_csum()
ext4: remove sbi argument from ext4_chksum()
ext4: enable large folio for regular file
ext4: make online defragmentation support large folios
ext4: make the writeback path support large folios
...
|
|
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm update from Paul Moore:
"One minor LSM framework patch to move the selinux_netlink_send() hook
under the CONFIG_SECURITY_NETWORK Kconfig knob"
* tag 'lsm-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: Move security_netlink_send to under CONFIG_SECURITY_NETWORK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Carrying the IMA measurement list across kexec is not a new feature,
but is updated to address a couple of issues:
- Carrying the IMA measurement list across kexec required knowing
apriori all the file measurements between the "kexec load" and
"kexec execute" in order to measure them before the "kexec load".
Any delay between the "kexec load" and "kexec exec" exacerbated the
problem.
- Any file measurements post "kexec load" were not carried across
kexec, resulting in the measurement list being out of sync with the
TPM PCR.
With these changes, the buffer for the IMA measurement list is still
allocated at "kexec load", but copying the IMA measurement list is
deferred to after quiescing the TPM.
Two new kexec critical data records are defined"
* tag 'integrity-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: do not copy measurement list to kdump kernel
ima: measure kexec load and exec events as critical data
ima: make the kexec extra memory configurable
ima: verify if the segment size has changed
ima: kexec: move IMA log copy from kexec load to execute
ima: kexec: define functions to copy IMA log at soft boot
ima: kexec: skip IMA segment validation after kexec soft reboot
kexec: define functions to map and unmap segments
ima: define and call ima_alloc_kexec_file_buf()
ima: rename variable the seq_file "file" to "ima_kexec_file"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
|
|
Introduce new mutex locking functions mutex_trylock_nest_lock() and
mutex_lock_killable_nest_lock() and use them to clean up locking
of all vCPUs for a VM.
For x86, this removes some complex code that was used instead
of lockdep's "nest_lock" feature.
For ARM and RISC-V, this removes a lockdep warning when the VM is
configured to have more than MAX_LOCK_DEPTH vCPUs, and removes a fair
amount of duplicate code by sharing the logic across all architectures.
Signed-off-by: Paolo BOnzini <pbonzini@redhat.com>
|
|
Merge in late fixes to prepare for the 6.16 net-next PR.
No conflicts nor adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
DONTCACHE I/O must have the completion punted to a workqueue, just like
what is done for unwritten extents, as the completion needs task context
to perform the invalidation of the folio(s). However, if writeback is
started off filemap_fdatawrite_range() off generic_sync() and it's an
overwrite, then the DONTCACHE marking gets lost as iomap_add_to_ioend()
don't look at the folio being added and no further state is passed down
to help it know that this is a dropbehind/DONTCACHE write.
Check if the folio being added is marked as dropbehind, and set
IOMAP_IOEND_DONTCACHE if that is the case. Then XFS can factor this into
the decision making of completion context in xfs_submit_ioend().
Additionally include this ioend flag in the NOMERGE flags, to avoid
mixing it with unrelated IO.
Since this is the 3rd flag that will cause XFS to punt the completion to
a workqueue, add a helper so that each one of them can get appropriately
commented.
This fixes extra page cache being instantiated when the write performed
is an overwrite, rather than newly instantiated blocks.
Fixes: b2cd5ae693a3 ("iomap: make buffered writes work with RWF_DONTCACHE")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/5153f6e8-274d-4546-bf55-30a5018e0d03@kernel.dk
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Prevent usage of shared memory regions where the length is zero,
as such configurations are not valid and may lead to unexpected behavior.
Signed-off-by: Sami Uddin <sami.md.ko@gmail.com>
Message-Id: <20250511222153.2332-1-sami.md.ko@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cgroup rstat shared the tracking tree across all controllers with the
rationale being that a cgroup which is using one resource is likely
to be using other resources at the same time (ie. if something is
allocating memory, it's probably consuming CPU cycles).
However, this turned out to not scale very well especially with memcg
using rstat for internal operations which made memcg stat read and
flush patterns substantially different from other controllers. JP
Kobryn split the rstat tree per controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can
be added easily. The two of the patches which implement this are
mislabeled as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates
- Documentation updates
* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
sched_ext: Introduce cgroup_lifetime_notifier
cgroup: Minor reorganization of cgroup_create()
cgroup, docs: cpu controller's interaction with various scheduling policies
cgroup, docs: convert space indentation to tab indentation
cgroup: avoid per-cpu allocation of size zero rstat cpu locks
cgroup, docs: be specific about bandwidth control of rt processes
cgroup: document the rstat per-cpu initialization
cgroup: helper for checking rstat participation of css
cgroup: use subsystem-specific rstat locks to avoid contention
cgroup: use separate rstat trees for each subsystem
cgroup: compare css to cgroup::self in helper for distingushing css
cgroup: warn on rstat usage by early init subsystems
cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
cgroup/rstat: Improve cgroup_rstat_push_children() documentation
cgroup: fix goto ordering in cgroup_init()
cgroup: fix pointer check in css_rstat_init()
cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
cgroup/cpuset: Always use cpu_active_mask
...
|
|
Pull workqueue updates from Tejun Heo:
"Fix statistic update race condition and a couple documentation
updates"
* tag 'wq-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix typo in comment
workqueue: Fix race condition in wq->stats incrementation
workqueue: Better document teardown for delayed_work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move kern_table members out of kernel/sysctl.c
Moved a subset (tracing, panic, signal, stack_tracer and sparc) out
of the kern_table array. The goal is for kern_table to only have
sysctl elements. All this increases modularity by placing the
ctl_tables closer to where they are used while reducing the chances
of merge conflicts in kernel/sysctl.c.
- Fixed sysctl unit test panic by relocating it to selftests
* tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Close test ctl_headers with a for loop
sysctl: call sysctl tests with a for loop
sysctl: Add 0012 to test the u8 range check
sysctl: move u8 register test to lib/test_sysctl.c
sparc: mv sparc sysctls into their own file under arch/sparc/kernel
stack_tracer: move sysctl registration to kernel/trace/trace_stack.c
tracing: Move trace sysctls into trace.c
signal: Move signal ctl tables into signal.c
panic: Move panic ctl tables into panic.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
"New two step DMA mapping API, which is is a first step to a long path
to provide alternatives to scatterlist and to remove hacks, abuses and
design mistakes related to scatterlists.
This new approach optimizes some calls to DMA-IOMMU layer and cache
maintenance by batching them, reduces memory usage as it is no need to
store mapped DMA addresses to unmap them, and reduces some function
call overhead. It is a combination effort of many people, lead and
developed by Christoph Hellwig and Leon Romanovsky"
* tag 'dma-mapping-6.16-2025-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
docs: core-api: document the IOVA-based API
dma-mapping: add a dma_need_unmap helper
dma-mapping: Implement link/unlink ranges API
iommu/dma: Factor out a iommu_dma_map_swiotlb helper
dma-mapping: Provide an interface to allow allocate IOVA
iommu: add kernel-doc for iommu_unmap_fast
iommu: generalize the batched sync after map interface
dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
PCI/P2PDMA: Refactor the p2pdma mapping helpers
|
|
The function is small enough that it should be, and it's a (very) hot path
for io_uring. Doing this actually reduces my vmlinux text size for my
standard build/test box.
Before:
axboe@r7625 ~/g/linux (test)> size vmlinux
text data bss dec hex filename
19892174 5938310 2470432 28300916 1afd674 vmlinux
After:
axboe@r7625 ~/g/linux (test)> size vmlinux
text data bss dec hex filename
19891878 5938310 2470436 28300624 1afd550 vmlinux
Link: https://lkml.kernel.org/r/f1d104c6-7ac8-457a-a53d-6bb741421b2f@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function __unmap_hugepage_range() has two kinds of users:
1) unmap_hugepage_range(), which passes in the head page of a folio.
Since unmap_hugepage_range() already takes folio and there are no other
uses of the folio struct in the function, it is natural for
__unmap_hugepage_range() to take folio also.
2) All other uses, which pass in NULL pointer.
In both cases, we can pass in folio. Refactor __unmap_hugepage_range() to
take folio.
Link: https://lkml.kernel.org/r/20250505182345.506888-5-nifan.cxl@gmail.com
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function unmap_hugepage_range() has two kinds of users:
1) unmap_ref_private(), which passes in the head page of a folio. Since
unmap_ref_private() already takes folio and there are no other uses
of the folio struct in the function, it is natural for
unmap_hugepage_range() to take folio also.
2) All other uses, which pass in NULL pointer.
In both cases, we can pass in folio. Refactor unmap_hugepage_range() to
take folio.
Link: https://lkml.kernel.org/r/20250505182345.506888-4-nifan.cxl@gmail.com
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both to_mdio_device() and to_phy_device() "throw away" the const pointer
attribute passed to them and return a non-const pointer, which generally
is not a good thing overall. Fix this up by using container_of_const()
which was designed for this very problem.
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Fixes: 7eab14de73a8 ("mdio, phy: fix -Wshadow warnings triggered by nested container_of()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052246-conduit-glory-8fc9@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The most significant part of these changes is an ACPICA update
covering two upstream ACPICA releases, 20241212 and 20250404, that
have not been included into the kernel code base yet.
Among other things, it adds definitions needed to address GCC 15's
-Wunterminated-string-initialization warnings, adds support for three
new tables (MRRM, ERDT, RIMT), extends support for two tables (RAS2,
DMAR), and fixes some issues.
On top of the above, there is a new parser for the MRRM table, more
changes related to GCC 15's -Wunterminated-string-initialization
warnings, a CPPC library update including functions related to
autonomous CPU performance state selection, a couple of new quirks,
some assorted fixes and some code cleanups.
Specifics:
- Fix two ACPICA SLAB cache leaks (Seunghun Han)
- Add EINJv2 get error type action and define Error Injection Actions
in hex values to avoid inconsistencies between the specification
and the code (Zaid Alali)
- Fix typo in comments for SRAT structures (Adam Lackorzynski)
- Prevent possible loss of data in ACPICA because of u32 to u8
conversions (Saket Dumbre)
- Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin)
- Add support for printing AML arguments when the ACPICA debug level
is ACPI_LV_TRACE_POINT (Mario Limonciello)
- Drop a stale comment about the file content from actbl2.h (Sudeep
Holla)
- Apply pack(1) to union aml_resource (Tamir Duberstein)
- Fix overflow check in the ACPICA version of vsnprintf() (gldrk)
- Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
specification (Alexey Neyman)
- Add typedef and other definitions related to MRRM to ACPICA (Tony
Luck)
- Add definitions for RIMT to ACPICA (Sunil V L)
- Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
utilities code (Colin Ian King)
- Add typedef and other definitions for ERDT to ACPICA (Tony Luck)
- Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem)
- Rename structure and field names of the RAS2 table in actbl2.h
(Shiju Jose)
- Fix up whitespace in acpica/utcache.c (Zhe Qiao)
- Avoid sequence overread in a call to strncmp() in
ap_get_table_length() and replace strncpy() with memcpy() in ACPICA
in some places (Ahmed Salem)
- Update copyright year in all ACPICA files (Saket Dumbre)
- Add __nonstring annotations for unterminated strings in the static
ACPI tables parsing code (Kees Cook)
- Add support for parsing the MRRM ACPI table and sysfs files to
describe memory regions listed in it (Tony Luck, Anil
Keshavamurthy)
- Remove an (explicitly) unused header file include from the VIOT
ACPI table parser file (Andy Shevchenko)
- Improve logging around acpi_initialize_tables() (Bartosz
Szczepanek)
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui)
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich)
- Simplify PCC shared memory region handling (Sudeep Holla)
- Rework and extend functions for reading CPPC register values and
for updating CPPC registers (Lifeng Zheng)
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng)
- Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into
a const pointer (Pei Xiao)
- Round battery capacity percengate in the ACPI battery driver to the
closest integer to avoid user confusion (shitao)
- Make the ACPI battery driver report the current as a negative
number to the power supply framework when the battery is
discharging as documented (Peter Marheine)
- Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[]
list to prevent spurious wakeups from suspend-to-idle (Werner
Sembach)
- Convert the APEI EINJ driver to a faux device one (Sudeep Holla,
Jon Hunter)
- Remove redundant calls to einj_get_available_error_type() from the
APEI EINJ driver (Zaid Alali)
- Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
Bai)
- Add an LPS0 check() callback to the AMD pinctrl driver and fix up
config symbol dependencies in it (Mario Limonciello, Rafael
Wysocki)
- Avoid initializing the ACPI platform profile driver on non-ACPI
platforms (Alexandre Ghiti)
- Document that references to ACPI data (non-device) nodes should use
string-only references in hierarchical data node packages (Sakari
Ailus)
- Fail the ACPI bus registration if acpi_kobj registration fails
(Armin Wolf)"
* tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
ACPI: MRRM: Fix default max memory region
ACPI: bus: Bail out if acpi_kobj registration fails
ACPI: platform_profile: Avoid initializing on non-ACPI platforms
pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
ACPI: tables: Improve logging around acpi_initialize_tables()
ACPI: VIOT: Remove (explicitly) unused header
ACPI: Add documentation for exposing MRRM data
ACPI: MRRM: Add /sys files to describe memory ranges
ACPI: MRRM: Minimal parse of ACPI MRRM table
ACPICA: Update copyright year
ACPICA: Logfile: Changes for version 20250404
ACPICA: Replace strncpy() with memcpy()
ACPICA: Apply ACPI_NONSTRING in more places
ACPICA: Avoid sequence overread in call to strncmp()
ACPICA: Adjust the position of code lines
ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table
ACPICA: Apply ACPI_NONSTRING
ACPICA: Introduce ACPI_NONSTRING
ACPICA: actbl2.h: ERDT: Add typedef and other definitions
ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Scan the eMMC boot areas for partition table
- Clarify purpose of mmc_can* functions by renaming them to mmc_card_can*
- Clarify helpers for host capabilities by renaming them to mmc_host_can*
- Add support for graceful host removal for SD and eMMC
- Further avoid re-storing power to the eMMC before a shutdown
- Add quirk to disable DDR50 tuning and use it for some Swissbit SD-cards
MMC host:
- mtk-sd: Add support for Dimensity 1200 MT6893
- mtk-sd: Fix condition to enable single burst type
- mtk-sd: Optimize several code-paths by aggregating register-writes
- renesas_sdhi: Add support for the Renesas RZ/V2N variant
- sdhci-msm: Add support for the SM7150 variant
- sdhci-esdhc-imx: Re-factor the system PM logic
- sdhci-esdhc-imx: Lots of improvements around the tuning support
- sdhci-of-arasan: Add support for the Renesas RZ/N1D variant
- sdhci-of-dwcmhsc: Add Sophgo SG2044 support
- sdhci-of-esdhc: Add support for the LS1021a variant
- sdhci-of-k1: Add new driver to support for SpacemiT K1 controller
- sdhci-pic32: Convert microchip,sdhci-pic32 DT doc to json schema
- wmt-sdmmc: Convert DT doc to json schema"
* tag 'mmc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
dt-bindings: mmc: sdhci-of-dwcmhsc: Allow use of a power-domain
mmc: sdhci-esdhc-imx: fix few build warnings
mmc: bcm2835: Use str_read_write() helper
mmc: host: sdhci-esdhc-imx: refactor the system PM logic
mmc: sdhci: export APIs for sdhci irq wakeup
mmc: sdhci-of-k1: add support for SpacemiT K1 SoC
dt-bindings: mmc: spacemit,sdhci: add support for K1 SoC
mmc: core: Scan the eMMC boot areas for partition table
dt-binding: mmc: microchip,sdhci-pic32: convert text based binding to json schema
mmc: rename mmc_boot_partition_access() to mmc_host_can_access_boot()
mmc: rename mmc_host_uhs() to mmc_host_can_uhs()
mmc: rename mmc_host_done_complete() to mmc_host_can_done_complete()
mmc: rename mmc_host_cmd23() to mmc_host_can_cmd23()
mmc: sdhci-esdhc-imx: fix defined but not used warnings
dt-bindings: mmc: vt8500-sdmmc: Convert to YAML
dt-bindings: mmc: sdhci-msm: Add the SM7150 compatible
dt-bindings: mmc: fsl,esdhc: add compatible string fsl,ls1021a-esdhc
mmc: cavium-thunderx: Use non-hybrid PCI devres API
dt-bindings: mmc: mtk-sd: Add support for Dimensity 1200 MT6893
dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo SG2044 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add residency reflection for domain-idlestates to debugfs
- Add genpd helper to correct the usage/rejected counters
pmdomain providers:
- mediatek: Add support for Dimensity 1200 MT6893
- qcom: Add support for SM4450 power domains
- rockchip: Add support for RK3562 SoC
- sunxi: Add support for Allwinner H6/H616 PRCM PPU
- ti: Fix STANDBY handling of OMAP2+ PER power domain
cpuidle-psci:
- Correct the domain-idlestate statistics in debugfs"
* tag 'pmdomain-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (23 commits)
pmdomain: ti: Fix STANDBY handling of PER power domain
pmdomain: amlogic: Constify some structures
pmdomain: core: Use genpd->opp_table to simplify error/remove path
pmdomain: core: Simplify return statement in genpd_power_off()
pmdomain: core: Convert genpd_power_off() to void
pmdomain: core: Convert to device_awake_path()
pmdomain: mediatek: Add error messages for missing regmaps
pmdomain: arm: Do not enable by default during compile testing
pmdomain: qcom: rpmhpd: Add SM4450 power domains
dt-bindings: power: qcom,rpmpd: Add SM4450 compatible
pmdomain: sunxi: add H6 PRCM PPU driver
dt-bindings: power: Add Allwinner H6/H616 PRCM PPU
pmdomain: bcm: bcm2835-power: Use devm_clk_get_optional
pmdomain: rockchip: Add support for RK3562 SoC
dt-bindings: power: rockchip: Add support for RK3562 SoC
pmdomain: mediatek: Add support for Dimensity 1200 MT6893
pmdomain: mediatek: Bump maximum bus protect data array elements
dt-bindings: power: mediatek: Support Dimensity 1200 MT6893 MTCMOS
pmdomain: core: Reset genpd->states to avoid freeing invalid data
pmdomain: core: Add residency reflection for domain-idlestates to debugfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- support charge_types in extensions
Power-supply drivers:
- new driver for Pegatron Chagall battery
- new driver for Maxim MAX8971 charger
- new driver for Huawei Matebook E Go
- bq27xxx: retry failed I2C transmissions
- bq24190: add BQ24193 support
- misc small cleanups and fixes
Reset drivers:
- new driver for Toradex SMARC Embedded Controller
- reboot-mode: add support for modes containing / in DT
- atmel,at91sam9260-reset: support sama7d65
- syscon-reboot: add Google GS101 support
- misc small cleanups and fixes"
* tag 'for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
power: supply: rt9471: Simplify definition of some struct linear_range
power: supply: max77976: add EXTCON dependency
power: supply: Add support for Maxim MAX8971 charger
dt-bindings: power: supply: Document Maxim MAX8971 charger
power: supply: max17040: adjust thermal channel scaling
power: reset: syscon-reboot: add gs101-specific reset
dt-bindings: reset: syscon-reboot: add google,gs101-reboot
power: supply: add Huawei Matebook E Go psy driver
power: supply: Add driver for Pegatron Chagall battery
dt-bindings: power: supply: Document Pegatron Chagall fuel gauge
dt-bindings: vendor-prefixes: add prefix for Pegatron Corporation
power: supply: cros_charge-control: Avoid -Wflex-array-member-not-at-end warning
power: reset: add Toradex Embedded Controller
dt-bindings: power: reset: add toradex,smarc-ec
power: supply: support charge_types in extensions
power: supply: max77705: Fix workqueue error handling in probe
power: supply: wm831x: Constify struct chg_map and some arrays
power: bq24190: Add BQ24193 support
dt-bindings: power: supply: bq24190: Add BQ24193 compatible
power: supply: sysfs: Remove duplicate NUL termination
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The bulk of the changes in this release are driver work, as well as
new device support we have some important work on performance over
several drivers, and big overhauls for maintainability on a couple
too. Highlights include:
- Big cleanups of the sh-msiof driver from Geert Uytterhoeven, and of
the NXP FSPI driver from Haibo Chen
- Performance improvements for the AXI SPI engine
- Support for writes to memory mapped flashes on Renesas devices
- Integrated DMA support for Tegra210 QSPI, used by the Tegra234
- DMA support for Amlogic SPI controllers
- Support for AMD HID2, Qualcomm IPQ5018, Renesas RZ/G3E, Rockchip
RK3528 and Samsung Exynos Autov920
An update to fix some issues with the Atmel QSPI driver runtime PM
pulled in a new API from the PM core, and the Renesas memory mapped
write changes pull in some code that's shared in drivers/memory"
* tag 'spi-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits)
spi: spi-qpic-snand: return early on error from qcom_spi_io_op()
spi: loopback-test: fix up const pointer issue in rx_ranges_cmp()
spi: gpio: fix const issue in spi_to_spi_gpio()
spi: spi-qpic-snand: remove superfluous parameters of qcom_spi_check_error()
dt-bindings: spi: samsung: add exynosautov920-spi compatible
spi: spi-qpic-snand: reuse qcom_spi_check_raw_flash_errors()
spi: dt-bindings: Add rk3528-spi compatible
spi: spi_amd: Update Kconfig dependencies
spi: spi_amd: Add HIDDMA basic write support
spi: spi_amd: Remove read{q,b} usage on DMA buffer
spi: sh-msiof: Move register definitions to <linux/spi/sh_msiof.h>
spi: sh-msiof: Document frame start sync pulse mode
spi: sh-msiof: Double maximum DMA transfer size using two groups
spi: sh-msiof: Simplify BRG's Division Ratio
spi: sh-msiof: Increase TX FIFO size for R-Car V4H/V4M
spi: sh-msiof: Correct RX FIFO size for R-Car Gen3
spi: sh-msiof: Correct RX FIFO size for R-Car Gen2
spi: sh-msiof: Add core support for dual-group transfers
spi: sh-msiof: Correct SIMDR2_GRPMASK
spi: sh-msiof: SIFCTR bitfield conversion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a very quiet release, there was no work on the core and a good
chunk of the updates were the result of conversions to use newer GPIO
APIs.
We did gain support for Analog ADP5055 and TI TPS65214 devices, and
there's a new restart handler for the PCA9450 which allows devices
using it to be properly power cycled on reboot, but otherwise it's
minor fixes and API updates"
* tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: qcom_spmi: Constify struct spmi_voltage_range
regulator: max8952: Correct Samsung "Electronics" spelling in copyright headers
regulator: dt-bindings: mt6357: Drop fixed compatible requirement
regulator: gpio: Use dev_err_probe
regulator: pca9450: Add restart handler
regulator: da9121: Fix Wvoid-pointer-to-enum-cast warning
regulator: tps65219: Add TI TPS65214 Regulator Support
regulator: tps65219: Add support for TPS65215 Regulator IRQs
regulator: tps65219: Add support for TPS65215 regulator resources
regulator: tps65219: Update struct names
regulator: pf9453: convert to use maple tree register cache
regulator: max20086: Change enable gpio to optional
regulator: max20086: Fix MAX200086 chip id
regulator: adp5055: Remove unneeded semicolon
regulator: adp5055: remove duplicate device table
regulator: adp5055: Add driver for adp5055
regulator: dt-bindings: adi,adp5055-regulator: Add adp5055 support
regulator: don't compare raw GPIO descriptor pointers
regulator: rpi-panel-attiny: use new GPIO line value setter callbacks
regulator: rpi-panel-attiny: use lock guards for the state mutex
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This release we have one new feature, support for chips that report
edge interrupts but don't provide distinct readback of that status per
line, plus a few cleanups"
* tag 'regmap-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Add support for chips without separate IRQ status
regmap-irq: Use dedicated interrupt wake setters
regmap: Move selecting for REGMAP_MDIO and REGMAP_IRQ
regcache: Use sort()'s default swap() implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
ASoC:
- Support for automatically enumerating DAIs from standards
conforming SoundWire SDCA devices; not much used as of this
writing, rather for future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and
Rockchip SAI controllers
HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes"
* tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (364 commits)
firmware: cs_dsp: Fix OOB memory read access in KUnit test
ASoC: codecs: add support for ES8375
ASoC: dt-bindings: Add Everest ES8375 audio CODEC
ALSA: hda: acpi: Make driver's match data const static
ALSA: hda: acpi: Use SYSTEM_SLEEP_PM_OPS()
ALSA: atmel: Replace deprecated strcpy() with strscpy()
ALSA: core: fix up bus match const issues.
ASoC: wm_adsp: Make cirrus_dir const
ASoC: tegra: Tegra264 support in isomgr_bw
ASoC: tegra: AHUB: Add Tegra264 support
ASoC: tegra: ADX: Add Tegra264 support
ASoC: tegra: AMX: Add Tegra264 support
ASoC: tegra: I2S: Add Tegra264 support
ASoC: tegra: Update PLL rate for Tegra264
ASoC: tegra: ASRC: Update ARAM address
ASoC: tegra: ADMAIF: Add Tegra264 support
ASoC: tegra: CIF: Add Tegra264 support
dt-bindings: ASoC: Document Tegra264 APE support
dt-bindings: ASoC: admaif: Add missing properties
ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This time around the pwm changes for the next release contain three
new drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual
collection of cleanups in both the core and drivers, support for new
variants in existing drivers, conversion of dt bindings to yaml and
documentation updates.
Thanks for contributions and reviews go to Alexey Charkov,
AngeloGioacchino Del Regno, Bartosz Golaszewski, Biju Das, Binbin
Zhou, Dan Carpenter, Dimitri Fedrau, Geert Uytterhoeven, George Stark,
Huacai Chen, Juxin Gao, Krzysztof Kozlowski, Kuninori Morimoto,
Laurent Pinchart, Neil Armstrong, Nuno Sá, Rob Herring, and Trevor
Gamblin"
* tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (39 commits)
dt-bindings: timer: renesas,tpu: remove binding documentation
pwm: adp5585: make sure to include mod_devicetable.h
pwm: Tidyup PWM menu for Renesas
pwm: Restore alphabetic ordering in Kconfig and Makefile
pwm: Formally describe the procedure used to pick a hardware waveform setting
pwm: Let pwm_set_waveform_might_sleep() return 0 instead of 1 after rounding up
pwm: Let pwm_set_waveform_might_sleep() fail for exact but impossible requests
ARM: shmobile: defconfig: Enable more support for RZN1D-DB/EB
arm64: defconfig: Add Renesas MSIOF sound support
arm64: defconfig: Enable Renesas RZ/G2L GPT config
pwm: add support for NXPs high-side switch MC33XS2410
dt-bindings: pwm: add support for MC33XS2410
pwm: rzg2l-gpt: Accept requests for too high period length
dt-bindings: pwm: vt8500-pwm: Convert to YAML
dt-bindings: pwm: mediatek,pwm-disp: Add compatible for MT6893
pwm: Fix various formatting issues in kernel-doc
pwm: Add support for RZ/G2L GPT
dt-bindings: pwm: Add RZ/G2L GPT binding
pwm: Better document return value of pwm_round_waveform_might_sleep()
pwm: loongson: Fix an error code in probe()
...
|
|
Yi Lai reported an issue ([1]) where the following warning appears
in kernel dmesg:
[ 60.643604] verifier backtracking bug
[ 60.643635] WARNING: CPU: 10 PID: 2315 at kernel/bpf/verifier.c:4302 __mark_chain_precision+0x3a6c/0x3e10
[ 60.648428] Modules linked in: bpf_testmod(OE)
[ 60.650471] CPU: 10 UID: 0 PID: 2315 Comm: test_progs Tainted: G OE 6.15.0-rc4-gef11287f8289-dirty #327 PREEMPT(full)
[ 60.654385] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 60.656682] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 60.660475] RIP: 0010:__mark_chain_precision+0x3a6c/0x3e10
[ 60.662814] Code: 5a 30 84 89 ea e8 c4 d9 01 00 80 3d 3e 7d d8 04 00 0f 85 60 fa ff ff c6 05 31 7d d8 04
01 48 c7 c7 00 58 30 84 e8 c4 06 a5 ff <0f> 0b e9 46 fa ff ff 48 ...
[ 60.668720] RSP: 0018:ffff888116cc7298 EFLAGS: 00010246
[ 60.671075] RAX: 54d70e82dfd31900 RBX: ffff888115b65e20 RCX: 0000000000000000
[ 60.673659] RDX: 0000000000000001 RSI: 0000000000000004 RDI: 00000000ffffffff
[ 60.676241] RBP: 0000000000000400 R08: ffff8881f6f23bd3 R09: 1ffff1103ede477a
[ 60.678787] R10: dffffc0000000000 R11: ffffed103ede477b R12: ffff888115b60ae8
[ 60.681420] R13: 1ffff11022b6cbc4 R14: 00000000fffffff2 R15: 0000000000000001
[ 60.684030] FS: 00007fc2aedd80c0(0000) GS:ffff88826fa8a000(0000) knlGS:0000000000000000
[ 60.686837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 60.689027] CR2: 000056325369e000 CR3: 000000011088b002 CR4: 0000000000370ef0
[ 60.691623] Call Trace:
[ 60.692821] <TASK>
[ 60.693960] ? __pfx_verbose+0x10/0x10
[ 60.695656] ? __pfx_disasm_kfunc_name+0x10/0x10
[ 60.697495] check_cond_jmp_op+0x16f7/0x39b0
[ 60.699237] do_check+0x58fa/0xab10
...
Further analysis shows the warning is at line 4302 as below:
4294 /* static subprog call instruction, which
4295 * means that we are exiting current subprog,
4296 * so only r1-r5 could be still requested as
4297 * precise, r0 and r6-r10 or any stack slot in
4298 * the current frame should be zero by now
4299 */
4300 if (bt_reg_mask(bt) & ~BPF_REGMASK_ARGS) {
4301 verbose(env, "BUG regs %x\n", bt_reg_mask(bt));
4302 WARN_ONCE(1, "verifier backtracking bug");
4303 return -EFAULT;
4304 }
With the below test (also in the next patch):
__used __naked static void __bpf_jmp_r10(void)
{
asm volatile (
"r2 = 2314885393468386424 ll;"
"goto +0;"
"if r2 <= r10 goto +3;"
"if r1 >= -1835016 goto +0;"
"if r2 <= 8 goto +0;"
"if r3 <= 0 goto +0;"
"exit;"
::: __clobber_all);
}
SEC("?raw_tp")
__naked void bpf_jmp_r10(void)
{
asm volatile (
"r3 = 0 ll;"
"call __bpf_jmp_r10;"
"r0 = 0;"
"exit;"
::: __clobber_all);
}
The following is the verifier failure log:
0: (18) r3 = 0x0 ; R3_w=0
2: (85) call pc+2
caller:
R10=fp0
callee:
frame1: R1=ctx() R3_w=0 R10=fp0
5: frame1: R1=ctx() R3_w=0 R10=fp0
; asm volatile (" \ @ verifier_precision.c:184
5: (18) r2 = 0x20202000256c6c78 ; frame1: R2_w=0x20202000256c6c78
7: (05) goto pc+0
8: (bd) if r2 <= r10 goto pc+3 ; frame1: R2_w=0x20202000256c6c78 R10=fp0
9: (35) if r1 >= 0xffe3fff8 goto pc+0 ; frame1: R1=ctx()
10: (b5) if r2 <= 0x8 goto pc+0
mark_precise: frame1: last_idx 10 first_idx 0 subseq_idx -1
mark_precise: frame1: regs=r2 stack= before 9: (35) if r1 >= 0xffe3fff8 goto pc+0
mark_precise: frame1: regs=r2 stack= before 8: (bd) if r2 <= r10 goto pc+3
mark_precise: frame1: regs=r2,r10 stack= before 7: (05) goto pc+0
mark_precise: frame1: regs=r2,r10 stack= before 5: (18) r2 = 0x20202000256c6c78
mark_precise: frame1: regs=r10 stack= before 2: (85) call pc+2
BUG regs 400
The main failure reason is due to r10 in precision backtracking bookkeeping.
Actually r10 is always precise and there is no need to add it for the precision
backtracking bookkeeping.
One way to fix the issue is to prevent bt_set_reg() if any src/dst reg is
r10. Andrii suggested to go with push_insn_history() approach to avoid
explicitly checking r10 in backtrack_insn().
This patch added push_insn_history() support for cond_jmp like 'rX <op> rY'
operations. In check_cond_jmp_op(), if any of rX or rY is a stack pointer,
push_insn_history() will record such information, and later backtrack_insn()
will do bt_set_reg() properly for those register(s).
[1] https://lore.kernel.org/bpf/Z%2F8q3xzpU59CIYQE@ly-workstation/
Reported by: Yi Lai <yi1.lai@linux.intel.com>
Fixes: 407958a0e980 ("bpf: encapsulate precision backtracking bookkeeping")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250524041335.4046126-1-yonghong.song@linux.dev
|
|
This reverts commit 478ad02d6844217cc7568619aeb0809d93ade43d.
Both the read and write side dirty && writeback races should be resolved
now, revert the commit that disabled FOP_DONTCACHE for filesystems.
Link: https://lore.kernel.org/linux-fsdevel/20250525083209.GS2023217@ZenIV/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/20250527133255.452431-4-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull rate-limit updates from Paul McKenney:
"lib/ratelimit: Reduce false-positive and silent misses:
- Reduce open-coded use of ratelimit_state structure fields.
- Convert the ->missed field to atomic_t.
- Count misses that are due to lock contention.
- Eliminate jiffies=0 special case.
- Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
- Allow zero ->burst to hard-disable rate limiting.
- Optimize away atomic operations when a miss is guaranteed.
- Warn if ->interval or ->burst are negative (Petr Mladek).
- Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet
ready for mainline. With luck, we will offer them for the v6.17 merge
window"
* tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
ratelimit: Drop redundant accesses to burst
ratelimit: Use nolock_ret restructuring to collapse common case code
ratelimit: Use nolock_ret label to collapse lock-failure code
ratelimit: Use nolock_ret label to save a couple of lines of code
ratelimit: Simplify common-case exit path
ratelimit: Warn if ->interval or ->burst are negative
ratelimit: Avoid atomic decrement under lock if already rate-limited
ratelimit: Avoid atomic decrement if already rate-limited
ratelimit: Don't flush misses counter if RATELIMIT_MSG_ON_RELEASE
ratelimit: Force re-initialization when rate-limiting re-enabled
ratelimit: Allow zero ->burst to disable ratelimiting
ratelimit: Reduce ___ratelimit() false-positive rate limiting
ratelimit: Avoid jiffies=0 special case
ratelimit: Count misses due to lock contention
ratelimit: Convert the ->missed field to atomic_t
drm/amd/pm: Avoid open-coded use of ratelimit_state structure's internals
drm/i915: Avoid open-coded use of ratelimit_state structure's ->missed field
random: Avoid open-coded use of ratelimit_state structure's ->missed field
ratelimit: Create functions to handle ratelimit_state internals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV update from Borislav Petkov:
"Add a virtual TPM driver glue which allows a guest kernel to talk to a
TPM device emulated by a Secure VM Service Module (SVSM) - a helper
module of sorts which runs at a different privilege level in the
SEV-SNP VM stack.
The intent being that a TPM device is emulated by a trusted entity and
not by the untrusted host which is the default assumption in the
confidential computing scenarios"
* tag 'x86_sev_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Register tpm-svsm platform device
tpm: Add SNP SVSM vTPM driver
svsm: Add header with SVSM_VTPM_CMD helpers
x86/sev: Add SVSM vTPM probe/send_command functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Carve out the resctrl filesystem-related code into fs/resctrl/ so that
multiple architectures can share the fs API for manipulating their
respective hw resource control implementation.
This is the second step in the work towards sharing the resctrl
filesystem interface, the next one being plugging ARM's MPAM into the
aforementioned fs API"
* tag 'x86_cache_for_v6.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
MAINTAINERS: Add reviewers for fs/resctrl
x86,fs/resctrl: Move the resctrl filesystem code to live in /fs/resctrl
x86/resctrl: Always initialise rid field in rdt_resources_all[]
x86/resctrl: Relax some asm #includes
x86/resctrl: Prefer alloc(sizeof(*foo)) idiom in rdt_init_fs_context()
x86/resctrl: Squelch whitespace anomalies in resctrl core code
x86/resctrl: Move pseudo lock prototypes to include/linux/resctrl.h
x86/resctrl: Fix types in resctrl_arch_mon_ctx_{alloc,free}() stubs
x86/resctrl: Move enum resctrl_event_id to resctrl.h
x86/resctrl: Move the filesystem bits to headers visible to fs/resctrl
fs/resctrl: Add boiler plate for external resctrl code
x86/resctrl: Add 'resctrl' to the title of the resctrl documentation
x86/resctrl: Split trace.h
x86/resctrl: Expand the width of domid by replacing mon_data_bits
x86/resctrl: Add end-marker to the resctrl_event_id enum
x86/resctrl: Move is_mba_sc() out of core.c
x86/resctrl: Drop __init/__exit on assorted symbols
x86/resctrl: Resctrl_exit() teardown resctrl but leave the mount point
x86/resctrl: Check all domains are offline in resctrl_exit()
x86/resctrl: Rename resctrl_sched_in() to begin with "resctrl_arch_"
...
|
|
The dmabuf iterator traverses the list of all DMA buffers.
DMA buffers are refcounted through their associated struct file. A
reference is taken on each buffer as the list is iterated to ensure each
buffer persists for the duration of the bpf program execution without
holding the list mutex.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-3-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Rename the debugfs list and mutex so it's clear they are now usable
without the need for CONFIG_DEBUG_FS. The list will always be populated
to support the creation of a BPF iterator for dmabufs.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-2-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In a few cases, usually in the initialization code, KVM locks all vCPUs
of a VM to ensure that userspace doesn't do funny things while KVM performs
an operation that affects the whole VM.
Until now, all these operations were implemented using custom code,
and all of them share the same problem:
Lockdep can't cope with simultaneous locking of a large number of locks of
the same class.
However if these locks are taken while another lock is already held,
which is luckily the case, it is possible to take advantage of little known
_nest_lock feature of lockdep which allows in this case to have an
unlimited number of locks of same class to be taken.
To implement this, create two functions:
kvm_lock_all_vcpus() and kvm_trylock_all_vcpus()
Both functions are needed because some code that will be replaced in
the subsequent patches, uses mutex_trylock, instead of regular mutex_lock.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM's SEV intra-host migration code needs to lock all vCPUs
of the source and the target VM, before it proceeds with the migration.
The number of vCPUs that belong to each VM is not bounded by anything
except a self-imposed KVM limit of CONFIG_KVM_MAX_NR_VCPUS vCPUs which is
significantly larger than the depth of lockdep's lock stack.
Luckily, the locks in both of the cases mentioned above, are held under
the 'kvm->lock' of each VM, which means that we can use the little
known lockdep feature called a "nest_lock" to support this use case in
a cleaner way, compared to the way it's currently done.
Implement and expose 'mutex_lock_killable_nest_lock' for this
purpose.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Despite the fact that several lockdep-related checks are skipped when
calling trylock* versions of the locking primitives, for example
mutex_trylock, each time the mutex is acquired, a held_lock is still
placed onto the lockdep stack by __lock_acquire() which is called
regardless of whether the trylock* or regular locking API was used.
This means that if the caller successfully acquires more than
MAX_LOCK_DEPTH locks of the same class, even when using mutex_trylock,
lockdep will still complain that the maximum depth of the held lock stack
has been reached and disable itself.
For example, the following error currently occurs in the ARM version
of KVM, once the code tries to lock all vCPUs of a VM configured with more
than MAX_LOCK_DEPTH vCPUs, a situation that can easily happen on modern
systems, where having more than 48 CPUs is common, and it's also common to
run VMs that have vCPU counts approaching that number:
[ 328.171264] BUG: MAX_LOCK_DEPTH too low!
[ 328.175227] turning off the locking correctness validator.
[ 328.180726] Please attach the output of /proc/lock_stat to the bug report
[ 328.187531] depth: 48 max: 48!
[ 328.190678] 48 locks held by qemu-kvm/11664:
[ 328.194957] #0: ffff800086de5ba0 (&kvm->lock){+.+.}-{3:3}, at: kvm_ioctl_create_device+0x174/0x5b0
[ 328.204048] #1: ffff0800e78800b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.212521] #2: ffff07ffeee51e98 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.220991] #3: ffff0800dc7d80b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.229463] #4: ffff07ffe0c980b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.237934] #5: ffff0800a3883c78 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.246405] #6: ffff07fffbe480b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
Luckily, in all instances that require locking all vCPUs, the
'kvm->lock' is taken a priori, and that fact makes it possible to use
the little known feature of lockdep, called a 'nest_lock', to avoid this
warning and subsequent lockdep self-disablement.
The action of 'nested lock' being provided to lockdep's lock_acquire(),
causes the lockdep to detect that the top of the held lock stack contains
a lock of the same class and then increment its reference counter instead
of pushing a new held_lock item onto that stack.
See __lock_acquire for more information.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
"Updates for the time/timer core code:
- Rework the initialization of the posix-timer kmem_cache and move
the cache pointer into the timer_data structure to prevent false
sharing
- Switch the alarmtimer code to lock guards
- Improve the CPU selection criteria in the per CPU validation of the
clocksource watchdog to avoid arbitrary selections (or omissions)
on systems with a small number of CPUs
- The usual cleanups and improvements"
* tag 'timers-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Remove unused tick_nohz_full_add_cpus_to()
clocksource: Fix the CPUs' choice in the watchdog per CPU verification
alarmtimer: Switch spin_{lock,unlock}_irqsave() to guards
alarmtimer: Remove dead return value in clock2alarm()
time/jiffies: Change register_refined_jiffies() to void __init
timers: Remove unused __round_jiffies(_up)
posix-timers: Initialize cache early and move pointer into __timer_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
|
