| Age | Commit message (Collapse) | Author |
|---|
|
The BCM590xx PMUs have two I2C registers for reading the PMU ID
and revision. The revision is useful for subdevice drivers, since
different revisions may have slight differences in behavior (for
example - BCM59054 has different regulator configurations for
revision A0 and A1).
Check the PMU ID register and make sure it matches the DT compatible.
Fetch the digital and analog revision from the PMUREV register
so that it can be used in subdevice drivers.
Also add some known revision values to bcm590xx.h, for convenience
when writing subdevice drivers.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-4-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The BCM59054 is another chip from the BCM590xx line of PMUs, commonly
used on devices with the BCM21664/BCM23550 chipsets.
Prepare the BCM590xx driver for supporting other devices by adding the
PMUID register values for supported chip types and store them in the
MFD data struct as "pmu_id". (These will be checked against the actual
PMUID register values in a later commit.)
Then, add a DT compatible for the BCM59054, and provide the PMU ID as
OF match data.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-3-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Some I2C ATRs can have other I2C ATRs as children. The I2C messages of
the child ATRs need to be forwarded as-is if the parent I2C ATR can
only do static mapping.
In the case of GMSL, the deserializer I2C ATR actually doesn't have I2C
address remapping hardware capabilities, but it is able to select which
GMSL link to talk to, allowing it to change the address of the
serializer.
The child ATRs need to have their alias pools defined in such a way to
prevent overlapping addresses between them, but there's no way around
this without orchestration between multiple ATR instances.
To allow for this use-case, add a flag that allows unmapped addresses
to be passed through, since they are already remapped by the child ATRs.
There's no case where an address that has not been remapped by the child
ATR will hit the parent ATR.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Some I2C ATRs do not support dynamic remapping, only static mapping
of direct children.
Mappings will only be added or removed as a result of devices being
added or removed from a child bus.
The ATR pool will have to be big enough to accommodate all devices
expected to be added to the child buses.
Add a new flag that prevents old mappings to be replaced or new mappings
to be created in the alias finding code paths. That mens adding a flags
parameter to i2c_atr_new() and an i2c_atr_flags enum.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Introduce new API, genphy_match_phy_device(), to provide a way to check
to match a PHY driver for a PHY device based on the info stored in the
PHY device struct.
The function generalize the logic used in phy_bus_match() to check the
PHY ID whether if C45 or C22 ID should be used for matching.
This is useful for custom .match_phy_device function that wants to use
the generic logic under some condition. (example a PHY is already setup
and provide the correct PHY ID)
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass PHY driver pointer to .match_phy_device OP in addition to phydev.
Having access to the PHY driver struct might be useful to check the
PHY ID of the driver is being matched for in case the PHY ID scanned in
the phydev is not consistent.
A scenario for this is a PHY that change PHY ID after a firmware is
loaded, in such case, the PHY ID stored in PHY device struct is not
valid anymore and PHY will manually scan the ID in the match_phy_device
function.
Having the PHY driver info is also useful for those PHY driver that
implement multiple simple .match_phy_device OP to match specific MMD PHY
ID. With this extra info if the parsing logic is the same, the matching
function can be generalized by using the phy_id in the PHY driver
instead of hardcoding.
Rust wrapper callback is updated to align to the new match_phy_device
arguments.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that skb_copy_and_hash_datagram_iter() is no longer used, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-11-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since skb_copy_and_hash_datagram_iter() is used only with CRC32C, the
crypto_ahash abstraction provides no value. Add
skb_copy_and_crc32c_datagram_iter() which just calls crc32c() directly.
This is faster and simpler. It also doesn't have the weird dependency
issue where skb_copy_and_hash_datagram_iter() depends on
CONFIG_CRYPTO_HASH=y without that being expressed explicitly in the
kconfig (presumably because it was too heavyweight for NET to select).
The new function is conditional on the hidden boolean symbol NET_CRC32C,
which selects CRC32. So it gets compiled only when something that
actually needs CRC32C packet checksums is enabled, it has no implicit
dependency, and it doesn't depend on the heavyweight crypto layer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-9-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
crc32c_combine() and crc32c_shift() are no longer used (except by the
KUnit test that tests them), and their current implementation is very
slow. Remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-8-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the only remaining caller of __skb_checksum() is
skb_checksum(), fold __skb_checksum() into skb_checksum(). This makes
struct skb_checksum_ops unnecessary, so remove that too and simply do
the "regular" net checksum. It also makes the wrapper functions
csum_partial_ext() and csum_block_add_ext() unnecessary, so remove those
too and just use the underlying functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-7-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add skb_crc32c(), which calculates the CRC32C of a sk_buff. It will
replace __skb_checksum(), which unnecessarily supports arbitrary
checksums. Compared to __skb_checksum(), skb_crc32c():
- Uses the correct type for CRC32C values (u32, not __wsum).
- Does not require the caller to provide a skb_checksum_ops struct.
- Is faster because it does not use indirect calls and does not use
the very slow crc32c_combine().
According to commit 2817a336d4d5 ("net: skb_checksum: allow custom
update/combine for walking skb") which added __skb_checksum(), the
original motivation for the abstraction layer was to avoid code
duplication for CRC32C and other checksums in the future. However:
- No additional checksums showed up after CRC32C. __skb_checksum()
is only used with the "regular" net checksum and CRC32C.
- Indirect calls are expensive. Commit 2544af0344ba ("net: avoid
indirect calls in L4 checksum calculation") worked around this
using the INDIRECT_CALL_1 macro. But that only avoided the indirect
call for the net checksum, and at the cost of an extra branch.
- The checksums use different types (__wsum and u32), causing casts
to be needed.
- It made the checksums of fragments be combined (rather than
chained) for both checksums, despite this being highly
counterproductive for CRC32C due to how slow crc32c_combine() is.
This can clearly be seen in commit 4c2f24549644 ("sctp: linearize
early if it's not GSO") which tried to work around this performance
bug. With a dedicated function for each checksum, we can instead
just use the proper strategy for each checksum.
As shown by the following tables, the new function skb_crc32c() is
faster than __skb_checksum(), with the improvement varying greatly from
5% to 2500% depending on the case. The largest improvements come from
fragmented packets, mainly due to eliminating the inefficient
crc32c_combine(). But linear packets are improved too, especially
shorter ones, mainly due to eliminating indirect calls. These
benchmarks were done on AMD Zen 5. On that CPU, Linux uses IBRS instead
of retpoline; an even greater improvement might be seen with retpoline:
Linear sk_buffs
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 43 18
256 94 77
1420 204 161
16384 1735 1642
Nonlinear sk_buffs (even split between head and one fragment)
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 579 22
256 829 77
1420 1506 194
16384 4365 1682
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16, part two
Add CPU hotplug support on Google GS101 by toggling respective bits in
secondary PMU intr block (Power Management Unit (PMU) Interrupt
Generation) from the main PMU driver.
* tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert pci_msi_enable and pci_msi_enabled() to use bool type for clarity.
No functional changes, only code cleanup.
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250516165223.125083-2-18255117159@163.com
|
|
Crash kernel will retrieve the dm crypt keys based on the dmcryptkeys
command line parameter. When user space writes the key description to
/sys/kernel/config/crash_dm_crypt_key/restore, the crash kernel will save
the encryption keys to the user keyring. Then user space e.g.
cryptsetup's --volume-key-keyring API can use it to unlock the encrypted
device.
Link: https://lkml.kernel.org/r/20250502011246.99238-6-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jan Pazdziora <jpazdziora@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the kdump kernel image and initrd are loaded, the dm crypts keys will
be read from keyring and then stored in kdump reserved memory.
Assume a key won't exceed 256 bytes thus MAX_KEY_SIZE=256 according to
"cryptsetup benchmark".
Link: https://lkml.kernel.org/r/20250502011246.99238-4-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jan Pazdziora <jpazdziora@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Support kdump with LUKS encryption by reusing LUKS volume
keys", v9.
LUKS is the standard for Linux disk encryption, widely adopted by users,
and in some cases, such as Confidential VMs, it is a requirement. With
kdump enabled, when the first kernel crashes, the system can boot into the
kdump/crash kernel to dump the memory image (i.e., /proc/vmcore) to a
specified target. However, there are two challenges when dumping vmcore
to a LUKS-encrypted device:
- Kdump kernel may not be able to decrypt the LUKS partition. For some
machines, a system administrator may not have a chance to enter the
password to decrypt the device in kdump initramfs after the 1st kernel
crashes; For cloud confidential VMs, depending on the policy the
kdump kernel may not be able to unseal the keys with TPM and the
console virtual keyboard is untrusted.
- LUKS2 by default use the memory-hard Argon2 key derivation function
which is quite memory-consuming compared to the limited memory reserved
for kdump. Take Fedora example, by default, only 256M is reserved for
systems having memory between 4G-64G. With LUKS enabled, ~1300M needs
to be reserved for kdump. Note if the memory reserved for kdump can't
be used by 1st kernel i.e. an user sees ~1300M memory missing in the
1st kernel.
Besides users (at least for Fedora) usually expect kdump to work out of
the box i.e. no manual password input or custom crashkernel value is
needed. And it doesn't make sense to derivate the keys again in kdump
kernel which seems to be redundant work.
This patchset addresses the above issues by making the LUKS volume keys
persistent for kdump kernel with the help of cryptsetup's new APIs
(--link-vk-to-keyring/--volume-key-keyring). Here is the life cycle of
the kdump copies of LUKS volume keys,
1. After the 1st kernel loads the initramfs during boot, systemd
use an user-input passphrase to de-crypt the LUKS volume keys
or TPM-sealed key and then save the volume keys to specified keyring
(using the --link-vk-to-keyring API) and the key will expire within
specified time.
2. A user space tool (kdump initramfs loader like kdump-utils) create
key items inside /sys/kernel/config/crash_dm_crypt_keys to inform
the 1st kernel which keys are needed.
3. When the kdump initramfs is loaded by the kexec_file_load
syscall, the 1st kernel will iterate created key items, save the
keys to kdump reserved memory.
4. When the 1st kernel crashes and the kdump initramfs is booted, the
kdump initramfs asks the kdump kernel to create a user key using the
key stored in kdump reserved memory by writing yes to
/sys/kernel/crash_dm_crypt_keys/restore. Then the LUKS encrypted
device is unlocked with libcryptsetup's --volume-key-keyring API.
5. The system gets rebooted to the 1st kernel after dumping vmcore to
the LUKS encrypted device is finished
After libcryptsetup saving the LUKS volume keys to specified keyring,
whoever takes this should be responsible for the safety of these copies of
keys. The keys will be saved in the memory area exclusively reserved for
kdump where even the 1st kernel has no direct access. And further more,
two additional protections are added,
- save the copy randomly in kdump reserved memory as suggested by Jan
- clear the _PAGE_PRESENT flag of the page that stores the copy as
suggested by Pingfan
This patchset only supports x86. There will be patches to support other
architectures once this patch set gets merged.
This patch (of 9):
Currently, kexec_buf is placed in order which means for the same machine,
the info in the kexec_buf is always located at the same position each time
the machine is booted. This may cause a risk for sensitive information
like LUKS volume key. Now struct kexec_buf has a new field random which
indicates it's supposed to be placed in a random position.
Note this feature is enabled only when CONFIG_CRASH_DUMP is enabled. So
it only takes effect for kdump and won't impact kexec reboot.
Link: https://lkml.kernel.org/r/20250502011246.99238-1-coxu@redhat.com
Link: https://lkml.kernel.org/r/20250502011246.99238-2-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Suggested-by: Jan Pazdziora <jpazdziora@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.16
Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14,
and block list TZMEM on the SM7150 platform to avoid issues with rmtfs.
Extend the last-level cache (llcc) driver to support version 6 of the
hardware and enable SM8750 support.
Also add socinfo for the SM8750 platform.
Re-enable UCSI support on SC8280XP, now that the reported crash has been
dealt with, and filter the altmode notifications to avoid spurious
hotplug events being propagated to user space.
Add SM7150 support to pd-mapper.
* tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: llcc-qcom: Add support for SM8750
soc: qcom: llcc-qcom: Add support for LLCC V6
dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block
soc: qcom: socinfo: add SM8750 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for SM8750
dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties
dt-bindings: soc: qcom,rpm: add missing clock-controller node
soc: qcom: smem: Update max processor count
firmware: qcom: tzmem: disable sm7150 platform
soc: qcom: pd-mapper: Add support for SM7150
soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events
soc: qcom: smp2p: Fix fallback to qcom,ipc parse
soc: qcom: pmic_glink: enable UCSI on sc8280xp
firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14
dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement
Link: https://lore.kernel.org/r/20250513215656.44448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.16
* Add T-HEAD TH1520 and Renesas RZ/V2H(P) USB2PHY reset controller
drivers.
* Add devm_reset_control_array_get_exclusive_released() variant to allow
using the acquire/release hand-off mechanism for exclusive reset
controls bundled into reset control arrays.
* Add Sophgo SG2044 reset controller to device tree bindings.
* tag 'reset-for-v6.16' of git://git.pengutronix.de/pza/linux:
dt-bindings: reset: sophgo: Add SG2044 bindings.
MAINTAINERS: Add entry for Renesas RZ/V2H(P) USB2PHY Port Reset driver
reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)
dt-bindings: reset: Document RZ/V2H(P) USB2PHY reset
reset: Add devm_reset_control_array_get_exclusive_released()
reset: thead: Add TH1520 reset controller driver
dt-bindings: reset: Add T-HEAD TH1520 SoC Reset Controller
Link: https://lore.kernel.org/r/20250513092516.3331585-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
On machines with multiple memory nodes, interleaving page allocations
across nodes allows for better utilization of each node's bandwidth.
Previous work by Gregory Price [1] introduced weighted interleave, which
allowed for pages to be allocated across nodes according to user-set
ratios.
Ideally, these weights should be proportional to their bandwidth, so that
under bandwidth pressure, each node uses its maximal efficient bandwidth
and prevents latency from increasing exponentially.
Previously, weighted interleave's default weights were just 1s -- which
would be equivalent to the (unweighted) interleave mempolicy, which goes
through the nodes in a round-robin fashion, ignoring bandwidth
information.
This patch has two main goals: First, it makes weighted interleave easier
to use for users who wish to relieve bandwidth pressure when using nodes
with varying bandwidth (CXL). By providing a set of "real" default
weights that just work out of the box, users who might not have the
capability (or wish to) perform experimentation to find the most optimal
weights for their system can still take advantage of bandwidth-informed
weighted interleave.
Second, it allows for weighted interleave to dynamically adjust to
hotplugged memory with new bandwidth information. Instead of manually
updating node weights every time new bandwidth information is reported or
taken off, weighted interleave adjusts and provides a new set of default
weights for weighted interleave to use when there is a change in bandwidth
information.
To meet these goals, this patch introduces an auto-configuration mode for
the interleave weights that provides a reasonable set of default weights,
calculated using bandwidth data reported by the system. In auto mode,
weights are dynamically adjusted based on whatever the current bandwidth
information reports (and responds to hotplug events).
This patch still supports users manually writing weights into the nodeN
sysfs interface by entering into manual mode. When a user enters manual
mode, the system stops dynamically updating any of the node weights, even
during hotplug events that shift the optimal weight distribution.
A new sysfs interface "auto" is introduced, which allows users to switch
between the auto (writing 1 or Y) and manual (writing 0 or N) modes. The
system also automatically enters manual mode when a nodeN interface is
manually written to.
There is one functional change that this patch makes to the existing
weighted_interleave ABI: previously, writing 0 directly to a nodeN
interface was said to reset the weight to the system default. Before this
patch, the default for all weights were 1, which meant that writing 0 and
1 were functionally equivalent. With this patch, writing 0 is invalid.
Link: https://lkml.kernel.org/r/20250520141236.2987309-1-joshua.hahnjy@gmail.com
[joshua.hahnjy@gmail.com: wordsmithing changes, simplification, fixes]
Link: https://lkml.kernel.org/r/20250511025840.2410154-1-joshua.hahnjy@gmail.com
[joshua.hahnjy@gmail.com: remove auto_kobj_attr field from struct sysfs_wi_group]
Link: https://lkml.kernel.org/r/20250512142511.3959833-1-joshua.hahnjy@gmail.com
https://lore.kernel.org/linux-mm/20240202170238.90004-1-gregory.price@memverge.com/ [1]
Link: https://lkml.kernel.org/r/20250505182328.4148265-1-joshua.hahnjy@gmail.com
Co-developed-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Suggested-by: Yunjeong Mun <yunjeong.mun@sk.com>
Suggested-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: Ying Huang <ying.huang@linux.alibaba.com>
Suggested-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
* Rename constants to their standard PE names:
- MZ_MAGIC -> IMAGE_DOS_SIGNATURE
- PE_MAGIC -> IMAGE_NT_SIGNATURE
- PE_OPT_MAGIC_PE32_ROM -> IMAGE_ROM_OPTIONAL_HDR_MAGIC
- PE_OPT_MAGIC_PE32 -> IMAGE_NT_OPTIONAL_HDR32_MAGIC
- PE_OPT_MAGIC_PE32PLUS -> IMAGE_NT_OPTIONAL_HDR64_MAGIC
- IMAGE_DLL_CHARACTERISTICS_NX_COMPAT -> IMAGE_DLLCHARACTERISTICS_NX_COMPAT
* Import constants and their description from readpe and file projects
which contains current up-to-date information:
- IMAGE_FILE_MACHINE_*
- IMAGE_FILE_*
- IMAGE_SUBSYSTEM_*
- IMAGE_DLLCHARACTERISTICS_*
- IMAGE_DLLCHARACTERISTICS_EX_*
- IMAGE_DEBUG_TYPE_*
* Add missing IMAGE_SCN_* constants and update their incorrect description
* Fix incorrect value of IMAGE_SCN_MEM_PURGEABLE constant
* Add description for win32_version and loader_flags PE fields
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Includes the following corrections -
- Changed Measurment -> Measurement
- Changed clode -> close
- Gyro -> gyro
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507055745.4069933-1-chelsyratnawat2001@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add new macros to help with the common case of declaring a buffer that
is safe to use with iio_push_to_buffers_with_ts(). This is not trivial
to do correctly because of the alignment requirements of the timestamp.
This will make it easier for both authors and reviewers.
To avoid double __align() attributes in cases where we also need DMA
alignment, add a 2nd variant IIO_DECLARE_DMA_BUFFER_WITH_TS().
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-2-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a condition to ensure that IIO_DMA_MINALIGN is at least 8 bytes.
On some 32-bit architectures, IIO_DMA_MINALIGN is 4. In many cases,
drivers are using this alignment for buffers that include a 64-bit
timestamp that is used with iio_push_to_buffers_with_ts(), which expects
the timestamp to be aligned to 8 bytes. To handle this, we can just make
IIO_DMA_MINALIGN at least 8 bytes.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-1-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
sensor_hub_remove_callback()
Fixed a typo in "registered" and improved grammar for better readability
and consistency with kernel-doc standards. No functional changes.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250502003655.1943000-1-chelsyratnawat2001@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
argument.
Check that data_total_len argument against iio_dev->scan_bytes.
The size needs to be at least as big as the scan. It can be larger,
which is typical if only part of fixed sized storage is used due to
a subset of channels being enabled.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes and changes for netfslib, if you could
pull them:
(1) Fix an oops in write-retry due to mis-resetting the I/O iterator.
(2) Fix the recording of transferred bytes for short DIO reads.
(3) Fix a request's work item to not require a reference, thereby avoiding
the need to get rid of it in BH/IRQ context.
(4) Fix waiting and waking to be consistent about the waitqueue used.
* patches from https://lore.kernel.org/20250519090707.2848510-1-dhowells@redhat.com:
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
Link: https://lore.kernel.org/20250519090707.2848510-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When the netfs_io_request struct's work item is queued, it must be supplied
with a ref to the work item struct to prevent it being deallocated whilst
on the queue or whilst it is being processed. This is tricky to manage as
we have to get a ref before we try and queue it and then we may find it's
already queued and is thus already holding a ref - in which case we have to
try and get rid of the ref again.
The problem comes if we're in BH or IRQ context and need to drop the ref:
if netfs_put_request() reduces the count to 0, we have to do the cleanup -
but the cleanup may need to wait.
Fix this by adding a new work item to the request, ->cleanup_work, and
dispatching that when the refcount hits zero. That can then synchronously
cancel any outstanding work on the main work item before doing the cleanup.
Adding a new work item also deals with another problem upstream where it's
sometimes changing the work func in the put function and requeuing it -
which has occasionally in the past caused the cleanup to happen
incorrectly.
As a bonus, this allows us to get rid of the 'was_async' parameter from a
bunch of functions. This indicated whether the put function might not be
permitted to sleep.
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <stfrench@microsoft.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A netfslib request comprises an ordered stream of subrequests that, when
doing an unbuffered/DIO read, are contiguous. The subrequests may be
performed in parallel, but may not be fully completed.
For instance, if we try and make a 256KiB DIO read from a 3-byte file with
a 64KiB rsize and 256KiB bsize, netfslib will attempt to make a read of
256KiB, broken up into four 64KiB subreads, with the expectation that the
first will be short and the subsequent three be completely devoid - but we
do all four on the basis that the file may have been changed by a third
party.
The read-collection code, however, walks through all the subreqs and
advances the notion of how much data has been read in the stream to the
start of each subreq plus its amount transferred (which are 3, 0, 0, 0 for
the example above) - which gives an amount apparently read of 3*64KiB -
which is incorrect.
Fix the collection code to cut short the calculation of the transferred
amount with the first short subrequest in an unbuffered read; everything
beyond that must be ignored as there's a hole that cannot be filled. This
applies both to shortness due to hitting the EOF and shortness due to an
error.
This is achieved by setting a flag on the request when we collect the first
short subrequest (collection is done in ascending order).
This can be tested by mounting a cifs volume with rsize=65536,bsize=262144
and doing a 256k DIO read of a very small file (e.g. 3 bytes). read()
should return 3, not >3.
This problem came in when netfs_read_collection() set rreq->transferred to
stream->transferred, even for DIO. Prior to that, netfs_rreq_assess_dio()
just went over the list and added up the subreqs till it met a short one -
but now the subreqs are discarded earlier.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Nicolas Baranger <nicolas.baranger@3xo.fr>
Closes: https://lore.kernel.org/all/10bec2430ed4df68bde10ed95295d093@3xo.fr/
Signed-off-by: "Paulo Alcantara (Red Hat)" <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519090707.2848510-3-dhowells@redhat.com
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
NETFS_RREQ_BLOCKED was added by commit 016dc8516aec ("netfs: Implement
unbuffered/DIO read support") but has never been used either. Without
NETFS_RREQ_BLOCKED, NETFS_RREQ_NONBLOCK makes no sense, and thus can
be removed as well.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-12-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
NETFS_RREQ_DONT_UNLOCK_FOLIOS has never been used ever since it was
added by commit 3d3c95046742 ("netfs: Provide readahead and readpage
netfs helpers").
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-11-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The last user was removed by commit e2d46f2ec332 ("netfs: Change the
read result collector to only use one work item").
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-10-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This field is only used for the "proc" filesystem.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-9-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since this field is only used by netfs_prepare_read_iterator() when
called by netfs_readahead(), we can simply pass it as parameter. This
shrinks the struct from 576 to 568 bytes.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-8-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This shrinks `struct netfs_io_stream` from 104 to 96 bytes and `struct
netfs_io_request` from 600 to 576 bytes.
[DH: Modified as the patch to turn netfs_io_request::error into a short
was removed from the set]
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-7-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This choice was added by commit 3a11b3a86366 ("netfs: Pass more
information on how to deal with a hole in the cache") but the last
user was removed by commit 86b374d061ee ("netfs: Remove
fs/netfs/io.c").
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-6-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This flag was added by commit 41d8e7673a77 ("netfs: Implement a
write-through caching option") but it was never used.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-5-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This enum choice was added by commit 16af134ca4b7 ("netfs: Extend the
netfs_io_*request structs to handle writes") and its only user was
later removed by commit c245868524cc ("netfs: Remove the old writeback
code").
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-4-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This flag was added by commit 3d3c95046742 ("netfs: Provide readahead
and readpage netfs helpers") but its only user was removed by commit
86b374d061ee ("netfs: Remove fs/netfs/io.c").
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519134813.2975312-3-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is a preparation patch for the introduction of CAN XL.
CAN FD and CAN XL uses similar bittiming parameters. Add one level of
nesting for all the CAN FD parameters. Typically:
priv->can.data_bittiming;
becomes:
priv->can.fd.data_bittiming;
This way, the CAN XL equivalent (to be introduced later) would be:
priv->can.xl.data_bittiming;
Add the new struct data_bittiming_params which contains all the data
bittiming parameters, including the TDC and the callback functions.
This done, update all the CAN FD drivers to make use of the new
layout.
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250501171213.2161572-2-mailhol.vincent@wanadoo.fr
[mkl: fix rcar_canfd]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Board files are deprecated by DT, and the last user of
nvmem_add_cell_table() was removed by commit 2af4fcc0d3574482 ("ARM:
davinci: remove unused board support") in v6.3. Hence remove all
support for nvmem cell tables, and update the documentation.
Device drivers can still register a single cell using
nvmem_add_one_cell() (which was not documented before).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250509122452.11827-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend the PIDFD_INFO_COREDUMP ioctl() with the new PIDFD_INFO_COREDUMP
mask flag. This adds the @coredump_mask field to struct pidfd_info.
When a task coredumps the kernel will provide the following information
to userspace in @coredump_mask:
* PIDFD_COREDUMPED is raised if the task did actually coredump.
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping (e.g.,
undumpable).
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server.
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should be
treated as sensitive and the coredump server should restrict to the
generated coredump to sufficiently privileged users.
The kernel guarantees that by the time the connection is made the all
PIDFD_INFO_COREDUMP info is available.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-5-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Coredumping currently supports two modes:
(1) Dumping directly into a file somewhere on the filesystem.
(2) Dumping into a pipe connected to a usermode helper process
spawned as a child of the system_unbound_wq or kthreadd.
For simplicity I'm mostly ignoring (1). There's probably still some
users of (1) out there but processing coredumps in this way can be
considered adventurous especially in the face of set*id binaries.
The most common option should be (2) by now. It works by allowing
userspace to put a string into /proc/sys/kernel/core_pattern like:
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h
The "|" at the beginning indicates to the kernel that a pipe must be
used. The path following the pipe indicator is a path to a binary that
will be spawned as a usermode helper process. Any additional parameters
pass information about the task that is generating the coredump to the
binary that processes the coredump.
In the example core_pattern shown above systemd-coredump is spawned as a
usermode helper. There's various conceptual consequences of this
(non-exhaustive list):
- systemd-coredump is spawned with file descriptor number 0 (stdin)
connected to the read-end of the pipe. All other file descriptors are
closed. That specifically includes 1 (stdout) and 2 (stderr). This has
already caused bugs because userspace assumed that this cannot happen
(Whether or not this is a sane assumption is irrelevant.).
- systemd-coredump will be spawned as a child of system_unbound_wq. So
it is not a child of any userspace process and specifically not a
child of PID 1. It cannot be waited upon and is in a weird hybrid
upcall which are difficult for userspace to control correctly.
- systemd-coredump is spawned with full kernel privileges. This
necessitates all kinds of weird privilege dropping excercises in
userspace to make this safe.
- A new usermode helper has to be spawned for each crashing process.
This series adds a new mode:
(3) Dumping into an AF_UNIX socket.
Userspace can set /proc/sys/kernel/core_pattern to:
@/path/to/coredump.socket
The "@" at the beginning indicates to the kernel that an AF_UNIX
coredump socket will be used to process coredumps.
The coredump socket must be located in the initial mount namespace.
When a task coredumps it opens a client socket in the initial network
namespace and connects to the coredump socket.
- The coredump server uses SO_PEERPIDFD to get a stable handle on the
connected crashing task. The retrieved pidfd will provide a stable
reference even if the crashing task gets SIGKILLed while generating
the coredump.
- By setting core_pipe_limit non-zero userspace can guarantee that the
crashing task cannot be reaped behind it's back and thus process all
necessary information in /proc/<pid>. The SO_PEERPIDFD can be used to
detect whether /proc/<pid> still refers to the same process.
The core_pipe_limit isn't used to rate-limit connections to the
socket. This can simply be done via AF_UNIX sockets directly.
- The pidfd for the crashing task will grow new information how the task
coredumps.
- The coredump server should mark itself as non-dumpable.
- A container coredump server in a separate network namespace can simply
bind to another well-know address and systemd-coredump fowards
coredumps to the container.
- Coredumps could in the future also be handled via per-user/session
coredump servers that run only with that users privileges.
The coredump server listens on the coredump socket and accepts a
new coredump connection. It then retrieves SO_PEERPIDFD for the
client, inspects uid/gid and hands the accepted client to the users
own coredump handler which runs with the users privileges only
(It must of coure pay close attention to not forward crashing suid
binaries.).
The new coredump socket will allow userspace to not have to rely on
usermode helpers for processing coredumps and provides a safer way to
handle them instead of relying on super privileged coredumping helpers
that have and continue to cause significant CVEs.
This will also be significantly more lightweight since no fork()+exec()
for the usermodehelper is required for each crashing process. The
coredump server in userspace can e.g., just keep a worker pool.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-4-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There is no need for an explicit NULL pointer initialisation plus a
comment why it is okay. RCU_INIT_POINTER() can be used for NULL
initialisations and it is documented.
This has been build tested with gcc version 9.3.0 (Debian 9.3.0-22) on a
x86-64 defconfig.
Fixes: 094ac8cff7858 ("futex: Relax the rcu_assign_pointer() assignment of mm->futex_phash in futex_mm_init()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250517151455.1065363-4-bigeasy@linutronix.de
|
|
This is comprised of 3 aspects:
- Take note of when applications advertise bracketed paste support via
"\e[?2004h" and "\e[?2004l".
- Insert bracketed paste markers ("\e[200~" and "\e[201~") around pasted
content in paste_selection() when bracketed paste is active.
- Add TIOCL_GETBRACKETEDPASTE to return bracketed paste status so user
space daemons implementing cut-and-paste functionality (e.g. gpm,
BRLTTY) may know when to insert bracketed paste markers.
Link: https://en.wikipedia.org/wiki/Bracketed-paste
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250520171851.1219676-2-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the code querying the newly introduced tables.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-7-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Up until now we have only called the set_stall callback during
initialization when the device is off. But we will soon start calling it
to temporarily disable stall-on-fault when the device is on, so handle
that by checking if the device is on and writing SCTLR.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20250520-msm-gpu-fault-fixes-next-v8-3-fce6ee218787@gmail.com
[will: Fix "mixed declarations and code" warning from sparse]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.16 merge window
This includes following USB4/Thunderbolt changes for the v6.16 merge
window:
- Enable wake on connect and disconnect over system suspend.
- Add mapping between Type-C ports and USB4 ports on non-Chrome systems.
- Expose tunneling related events to userspace.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
Documentation/admin-guide: Document Thunderbolt/USB4 tunneling events
thunderbolt: Notify userspace about firmware CM tunneling events
thunderbolt: Notify userspace about software CM tunneling events
thunderbolt: Introduce domain event message handler
usb: typec: Connect Type-C port with associated USB4 port
thunderbolt: Add Thunderbolt/USB4 <-> USB3 match function
thunderbolt: Expose usb4_port_index() to other modules
thunderbolt: Fix a logic error in wake on connect
thunderbolt: Use wake on connect and disconnect over suspend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.16-1
* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Update file references in the Documentation and MAINTAINERS
- acpi: Move quirks to a separate file
- acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
- acpi: Handle deferred list via new API
- acpi: Make sure we fill struct acpi_gpio_info
- acpi: Switch to use enum in acpi_gpio_in_ignore_list()
- acpi: Use temporary variable for struct acpi_gpio_info
- acpi: Deduplicate some code in __acpi_find_gpio()
- acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
- acpi: Rename par to params for better readability
- acpi: Reduce memory footprint for struct acpi_gpio_params
- acpi: Remove index parameter from acpi_gpio_property_lookup()
- acpi: Improve struct acpi_gpio_info memory footprint
|
|
Using devm_pinctrl_register_mappings(), the core can automatically
unregister pinctrl mappings.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/20250520-aaeon-up-board-pinctrl-support-v6-3-dcb3756be3c6@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Extern is the default specifier for a function, no need to define it.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/20250520-aaeon-up-board-pinctrl-support-v6-2-dcb3756be3c6@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
