| Age | Commit message (Collapse) | Author |
|---|
|
Querying the current time is the most costly thing we do in the block
layer per IO, and depending on kernel config settings, we may do it
many times per IO.
None of the callers actually need nsec granularity. Take advantage of
that by caching the current time in the plug, with the assumption here
being that any time checking will be temporally close enough that the
slight loss of precision doesn't matter.
If the block plug gets flushed, eg on preempt or schedule out, then
we invalidate the cached clock.
On a basic peak IOPS test case with iostats enabled, this changes
the performance from:
IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31
IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32
IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32
IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32
IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31
IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32
IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31
to
IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32
IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31
IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31
IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32
IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31
IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31
IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32
which is more than a 9% improvement in performance. Looking at perf diff,
we can see a huge reduction in time overhead:
10.55% -9.88% [kernel.vmlinux] [k] read_tsc
1.31% -1.22% [kernel.vmlinux] [k] ktime_get
Note that since this relies on blk_plug for the caching, it's only
applicable to the issue side. But this is where most of the time calls
happen anyway. On the completion side, cached time stamping is done with
struct io_comp patch, as long as the driver supports it.
It's also worth noting that the above testing doesn't enable any of the
higher cost CPU items on the block layer side, like wbt, cgroups,
iocost, etc, which all would add additional time querying and hence
overhead. IOW, results would likely look even better in comparison with
those enabled, as distros would do.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for moving time keeping into blk.h, move the cgroup
related code for timestamps in here too. This will help avoid a circular
dependency, and also moves it into a more appropriate header as this one
is private to the block layer code.
Leave struct bio_issue in blk_types.h as it's a proper time definition.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When regmap consists of single register, 'regmap' subsystem is unable to
understand whether ->max_register is set or not, because in both cases it
is equal to zero. It leads to that the logic based on value of
->max_register doesn't work. For example using of REGCACHE_FLAT fails.
This patch introduces an extra parameter to regmap config, indicating
that zero value in ->max_register is authentic.
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Link: https://lore.kernel.org/r/20240126200836.1829995-1-jan.dakinevich@salutedevices.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
./include/linux/spi/spi.h:778: warning: Excess struct member 'multi_cs_cap' description in 'spi_controller'
Signed-off-by: R SUNDAR <prosunofficial@gmail.com>
Link: https://lore.kernel.org/r/20240204154506.3561-1-prosunofficial@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is not necessary to define struct suspend_stats in a header file and the
suspend_stats variable in the core device system-wide PM code. They both
can be defined in kernel/power/main.c, next to the sysfs and debugfs code
accessing suspend_stats, which can be static.
Modify the code in question in accordance with the above observation and
replace the static inline functions manipulating suspend_stats with
regular ones defined in kernel/power/main.c.
While at it, move the enum suspend_stat_step to the end of suspend.h which
is a more suitable place for it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
While reviewing the hyperbus sfdp proposal the following problem was
noticed:
In file included from ./include/linux/mtd/gen_probe.h:10,
from drivers/mtd/hyperbus/hyperbus-sfdp.c:6:
./include/linux/mtd/flashchip.h:77:9: error: unknown type name ‘wait_queue_head_t’
77 | wait_queue_head_t wq; /* Wait on here when we're waiting for the chip
| ^~~~~~~~~~~~~~~~~
It is good practice to directly include all headers used, it avoids
implicit dependencies and spurious breakage if someone rearranges
headers and causes the implicit include to vanish.
Explicitly include <linux/wait.h> in include/linux/mtd/flashchip.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240205100955.149755-1-tudor.ambarus@linaro.org
|
|
Change the type of the "success" and "fail" fields in struct
suspend_stats to unsigned int, because they cannot be negative.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Instead of using a set of individual struct suspend_stats fields
representing suspend step failure counters, use an array of counters
indexed by enum suspend_stat_step for this purpose, which allows
dpm_save_failed_step() to increment the appropriate counter
automatically, so that its callers don't need to do that directly.
It also allows suspend_stats_show() to carry out a loop over the
counters array to print their values.
Because the counters cannot become negative, use unsigned int for
representing them.
The only user-observable impact of this change is a different
ordering of entries in the suspend_stats debugfs file which is not
expected to matter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
E.g. ESMT chips will return an identification code with a length of 5
bytes. In order to prevent ambiguity, flash chips would actually need to
return IDs that are up to 17 or more bytes long due to JEDEC's
continuation scheme. I understand that if a manufacturer ID is located
in bank N of JEDEC's database (there are currently 16 banks), N - 1
continuation codes (7Fh) need to be added to the identification code
(comprising of manufacturer ID and device ID). However, most flash chip
manufacturers don't seem to implement this (correctly).
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Reviewed-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Tested-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240125200108.24374-2-ezra@easyb.ch
|
|
Replace suspend_step_name() in the suspend statistics code with an array
of suspend step names which has fewer lines of code and less overhead.
While at it, remove two unnecessary line breaks in suspend_stats_show()
and adjust some white space in there to the kernel coding style for a
more consistent code layout.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Zdenek reported seeing some AVC denials due to nfsd trying to set
delegations:
type=AVC msg=audit(09.11.2023 09:03:46.411:496) : avc: denied { lease } for pid=5127 comm=rpc.nfsd capability=lease scontext=system_u:system_r:nfsd_t:s0 tcontext=system_u:system_r:nfsd_t:s0 tclass=capability permissive=0
When setting delegations on behalf of nfsd, we don't want to do all of
the normal capabilty and LSM checks. nfsd is a kernel thread and runs
with CAP_LEASE set, so the uid checks end up being a no-op in most cases
anyway.
Some nfsd functions can end up running in normal process context when
tearing down the server. At that point, the CAP_LEASE check can fail and
cause the client to not tear down delegations when expected.
Also, the way the per-fs ->setlease handlers work today is a little
convoluted. The non-trivial ones are wrappers around generic_setlease,
so when they fail due to permission problems they usually they end up
doing a little extra work only to determine that they can't set the
lease anyway. It would be more efficient to do those checks earlier.
Transplant the permission checking from generic_setlease to
vfs_setlease, which will make the permission checking happen earlier on
filesystems that have a ->setlease operation. Add a new kernel_setlease
function that bypasses these checks, and switch nfsd to use that instead
of vfs_setlease.
There is one behavioral change here: prior this patch the
setlease_notifier would fire even if the lease attempt was going to fail
the security checks later. With this change, it doesn't fire until the
caller has passed them. I think this is a desirable change overall. nfsd
is the only user of the setlease_notifier and it doesn't benefit from
being notified about failed attempts.
Cc: Ondrej Mosnáček <omosnacek@gmail.com>
Reported-by: Zdenek Pytela <zpytela@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2248830
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240205-bz2248830-v1-1-d0ec0daecba1@kernel.org
Acked-by: Tom Talpey <tom@talpey.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new struct file_lease and move the lease-specific fields from
struct file_lock to it. Convert the appropriate API calls to take
struct file_lease instead, and convert the callers to use them.
There is zero overlap between the lock manager operations for file
locks and the ones for file leases, so split the lease-related
operations off into a new lease_manager_operations struct.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-47-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Everything has been converted to access fl_core fields directly, so we
can now drop these.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-46-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most of the existing APIs have remained the same, but subsystems that
access file_lock fields directly need to reach into struct
file_lock_core now.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-40-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both locks and leases deal with fl_blocker. Switch the fl_blocker
pointer in struct file_lock_core to point to the file_lock_core of the
blocker instead of a file_lock structure.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-26-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In a future patch, we're going to split file leases into their own
structure. Since a lot of the underlying machinery uses the same fields
move those into a new file_lock_core, and embed that inside struct
file_lock.
For now, add some macros to ensure that we can continue to build while
the conversion is in progress.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-17-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches we're going to embed some common fields into a new
structure inside struct file_lock. Smooth the transition by adding some
new helper functions, and converting the core file locking code to use
them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-4-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the struct address_space, there is a 32-byte gap between i_mmap
and i_mmap_rwsem. Due to the alignment of struct address_space
variables to 8 bytes, in certain situations, i_mmap and i_mmap_rwsem
may end up in the same CACHE line.
While running Unixbench/execl, we observe high false sharing issues
when accessing i_mmap against i_mmap_rwsem. We move i_mmap_rwsem
after i_private_list, ensuring a 64-byte gap between i_mmap and
i_mmap_rwsem.
For Intel Silver machines (2 sockets) using kernel v6.8 rc-2, the score
of Unixbench/execl improves by ~3.94%, and the score of Unixbench/shell
improves by ~3.26%.
Baseline:
-------------------------------------------------------------
162 546 748 11374 21 0xffff92e266af90c0
-------------------------------------------------------------
46.89% 44.65% 0.00% 0.00% 0x0 1 1 0xffffffff86d5fb96 460 258 271 1069 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1
4.21% 4.41% 0.00% 0.00% 0x4 1 1 0xffffffff86d0ed54 473 311 288 95 28 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1
0.00% 0.00% 0.04% 4.76% 0x8 1 1 0xffffffff86d4bcf1 0 0 0 5 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1
6.41% 6.02% 0.00% 0.00% 0x8 1 1 0xffffffff86d4ba85 411 271 339 210 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1
0.00% 0.00% 0.47% 95.24% 0x10 1 1 0xffffffff86d4bd34 0 0 0 74 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1
0.37% 0.13% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4f 328 212 380 7 5 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1
5.13% 5.08% 0.00% 0.00% 0x10 1 1 0xffffffff86d4bb4b 416 255 357 197 32 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1
1.10% 0.53% 0.00% 0.00% 0x28 1 1 0xffffffff86e06eb8 395 228 351 24 14 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1
1.10% 2.14% 57.07% 0.00% 0x38 1 1 0xffffffff878c9225 1364 792 462 7003 32 [k] down_write [kernel.vmlinux] atomic64_64.h:109 0 1
0.00% 0.00% 0.01% 0.00% 0x38 1 1 0xffffffff878c8e75 0 0 252 3 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1
0.00% 0.13% 0.00% 0.00% 0x38 1 1 0xffffffff878c8e23 0 596 63 2 2 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1
2.38% 2.94% 6.53% 0.00% 0x38 1 1 0xffffffff878c8ccb 1150 818 570 1197 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:109 0 1
30.59% 32.22% 0.00% 0.00% 0x38 1 1 0xffffffff878c8cb4 423 251 380 648 32 [k] rwsem_down_write_slowpath [kernel.vmlinux] atomic64_64.h:15 0 1
1.83% 1.74% 35.88% 0.00% 0x38 1 1 0xffffffff86b4f833 1217 1112 565 4586 32 [k] up_write [kernel.vmlinux] atomic64_64.h:91 0 1
with this change:
-------------------------------------------------------------
360 12 300 57 35 0xffff982cdae76400
-------------------------------------------------------------
50.00% 59.67% 0.00% 0.00% 0x0 1 1 0xffffffff8215fb86 352 200 191 558 32 [k] __handle_mm_fault [kernel.vmlinux] memory.c:2940 0 1
8.33% 5.00% 0.00% 0.00% 0x4 1 1 0xffffffff8210ed44 370 284 263 42 24 [k] filemap_read [kernel.vmlinux] atomic.h:23 0 1
0.00% 0.00% 5.26% 2.86% 0x8 1 1 0xffffffff8214bce1 0 0 0 4 4 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:204 0 1
33.33% 14.33% 0.00% 0.00% 0x8 1 1 0xffffffff8214ba75 344 186 219 140 32 [k] vma_interval_tree_insert [kernel.vmlinux] interval_tree.c:23 0 1
0.00% 0.00% 94.74% 97.14% 0x10 1 1 0xffffffff8214bd24 0 0 0 88 29 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:339 0 1
8.33% 20.00% 0.00% 0.00% 0x10 1 1 0xffffffff8214bb3b 296 209 226 167 31 [k] vma_interval_tree_remove [kernel.vmlinux] rbtree_augmented.h:338 0 1
0.00% 0.67% 0.00% 0.00% 0x28 1 1 0xffffffff82206f45 0 140 334 4 3 [k] do_dentry_open [kernel.vmlinux] open.c:966 0 1
0.00% 0.33% 0.00% 0.00% 0x38 1 1 0xffffffff8250a6c4 0 286 126 5 5 [k] errseq_sample [kernel.vmlinux] errseq.c:125 0
Signed-off-by: JonasZhou <JonasZhou@zhaoxin.com>
Link: https://lore.kernel.org/r/20240202083304.10995-1-JonasZhou-oc@zhaoxin.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws such as
the execution code accessing the tasklet item after the execution is
complete which can lead to subtle use-after-free in certain usage scenarios
and less-developed flush and cancel mechanisms.
This patch implements BH workqueues which share the same semantics and
features of regular workqueues but execute their work items in the softirq
context. As there is always only one BH execution context per CPU, none of
the concurrency management mechanisms applies and a BH workqueue can be
thought of as a convenience wrapper around softirq.
Except for the inability to sleep while executing and lack of max_active
adjustments, BH workqueues and work items should behave the same as regular
workqueues and work items.
Currently, the execution is hooked to tasklet[_hi]. However, the goal is to
convert all tasklet users over to BH workqueues. Once the conversion is
complete, tasklet can be removed and BH workqueues can directly take over
the tasklet softirqs.
system_bh[_highpri]_wq are added. As queue-wide flushing doesn't exist in
tasklet, all existing tasklet users should be able to use the system BH
workqueues without creating their own workqueues.
v3: - Add missing interrupt.h include.
v2: - Instead of using tasklets, hook directly into its softirq action
functions - tasklet[_hi]_action(). This is slightly cheaper and closer
to the eventual code structure we want to arrive at. Suggested by Lai.
- Lai also pointed out several places which need NULL worker->task
handling or can use clarification. Updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CAHk-=wjDW53w4-YcSmgKC5RruiRLHmJ1sXeYdp_ZgVoBw=5byA@mail.gmail.com
Tested-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
|
|
We can use a global dev_unreg_count counter instead
of a per netns one.
As a bonus we can factorize the changes done on it
for bulk device removals.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes the following code style problem:
- WARNING: please, no spaces at the start of a line
- CHECK: Please use a blank line after
function/struct/union/enum declarations
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Aligning the buffer to the L1 cache is not sufficient in some platforms
as they might have larger cacheline sizes for caches after L1 and thus,
we can't guarantee DMA safety.
That was the whole reason to introduce IIO_DMA_MINALIGN in [1]. Do the same
for st_sensors common buffer.
While at it, moved the odr_lock before buffer_data as we definitely
don't want any other data to share a cacheline with the buffer.
[1]: https://lore.kernel.org/linux-iio/20220508175712.647246-2-jic23@kernel.org/
Fixes: e031d5f558f1 ("iio:st_sensors: remove buffer allocation at each buffer enable")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131-dev_dma_safety_stm-v2-1-580c07fae51b@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Core:
- fix return value of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks"
* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: add missing kernel-doc style description
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
dmaengine: fsl-qdma: Remove a useless devm_kfree()
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
dmaengine: ti: k3-udma: Report short packet errors
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
dmaengine: at_hdmac: fix some kernel-doc warnings
|
|
Jonathan reports that CXL CPER events dump an extra generic error
message.
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
{1}[Hardware Error]: event severity: recoverable
{1}[Hardware Error]: Error 0, type: recoverable
{1}[Hardware Error]: section type: unknown, fbcd0a77-c260-417f-85a9-088b1621eba6
{1}[Hardware Error]: section length: 0x90
{1}[Hardware Error]: 00000000: 00000090 00000007 00000000 0d938086 ................
{1}[Hardware Error]: 00000010: 00100000 00000000 00040000 00000000 ................
...
CXL events were rerouted though the CXL subsystem for additional
processing. However, when that work was done it was missed that
cper_estatus_print_section() continued with a generic error message
which is confusing.
Teach CPER print code to ignore printing details of some section types.
Assign the CXL event GUIDs to this set to prevent confusing unknown
prints.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When the width of a fill is smaller than the width of the preceding
spill, the information about scalar boundaries can still be preserved,
as long as it's coerced to the right width (done by coerce_reg_to_size).
Even further, if the actual value fits into the fill width, the ID can
be preserved as well for further tracking of equal scalars.
Implement the above improvements, which makes narrowing fills behave the
same as narrowing spills and MOVs between registers.
Two tests are adjusted to accommodate for endianness differences and to
take into account that it's now allowed to do a narrowing fill from the
least significant bits.
reg_bounds_sync is added to coerce_reg_to_size to correctly adjust
umin/umax boundaries after the var_off truncation, for example, a 64-bit
value 0xXXXXXXXX00000000, when read as a 32-bit, gets umin = 0, umax =
0xFFFFFFFF, var_off = (0x0; 0xffffffff00000000), which needs to be
synced down to umax = 0, otherwise reg_bounds_sanity_check doesn't pass.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240127175237.526726-4-maxtram95@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Fix a potential deadlock that was reintroduced by an ASPM revert
merged for v6.8 (Johan Hovold)
- Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
Pieralisi)
* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
PCI/ASPM: Fix deadlock when enabling ASPM
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Remove duplicated enums (Guixen)
- Use appropriate controller state accessors (Keith)
- Retryable authentication (Hannes)
- Add missing module descriptions (Chaitanya)
- Fibre-channel fixes for blktests (Daniel)
- Various type correctness updates (Caleb)
- Improve fabrics connection debugging prints (Nitin)
- Passthrough command verbose error logging (Adam)
- Fix for where we set IO priority in the bio for drivers that use
fops->submit_bio() to queue IO, like md/dm etc.
* tag 'block-6.8-2024-02-01' of git://git.kernel.dk/linux: (32 commits)
block: Fix where bio IO priority gets set
nvme: allow passthru cmd error logging
nvme-fc: show hostnqn when connecting to fc target
nvme-rdma: show hostnqn when connecting to rdma target
nvme-tcp: show hostnqn when connecting to tcp target
nvmet-fc: use RCU list iterator for assoc_list
nvmet-fc: take ref count on tgtport before delete assoc
nvmet-fc: avoid deadlock on delete association path
nvmet-fc: abort command when there is no binding
nvmet-fc: do not tack refs on tgtports from assoc
nvmet-fc: remove null hostport pointer check
nvmet-fc: hold reference on hostport match
nvmet-fc: free queue and assoc directly
nvmet-fc: defer cleanup using RCU properly
nvmet-fc: release reference on target port
nvmet-fcloop: swap the list_add_tail arguments
nvme-fc: do not wait in vain when unloading module
nvme-fc: log human-readable opcode on timeout
nvme: split out fabrics version of nvme_opcode_str()
nvme: take const cmd pointer in read-only helpers
...
|
|
Declaring rodata_enabled and mark_rodata_ro() at all time
helps removing related #ifdefery in C files.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
All users are already assigning a const char * to the `governor_name`
member of struct thermal_zone_params and to the `name` member of
struct thermal_governor.
Even if users are technically wrong, it just makes more sense to change
this member to be a const char pointer instead of doing the other way
around.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With this flag:
- pidfd_open() doesn't require that the target task must be
a thread-group leader
- pidfd_poll() succeeds when the task exits and becomes a
zombie (iow, passes exit_notify()), even if it is a leader
and thread-group is not empty.
This means that the behaviour of pidfd_poll(PIDFD_THREAD,
pid-of-group-leader) is not well defined if it races with
exec() from its sub-thread; pidfd_poll() can succeed or not
depending on whether pidfd_task_exited() is called before
or after exchange_tids().
Perhaps we can improve this behaviour later, pidfd_poll()
can probably take sig->group_exec_task into account. But
this doesn't really differ from the case when the leader
exits before other threads (so pidfd_poll() succeeds) and
then another thread execs and pidfd_poll() will block again.
thread_group_exited() is no longer used, perhaps it can die.
Co-developed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240131132602.GA23641@redhat.com
Tested-by: Tycho Andersen <tandersen@netflix.com>
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
- make pidfd_create() static.
- Don't pass O_RDWR | O_CLOEXEC to __pidfd_prepare() in copy_process(),
__pidfd_prepare() adds these flags unconditionally.
- Kill the flags check in __pidfd_prepare(). sys_pidfd_open() checks the
flags itself, all other users of pidfd_prepare() pass flags = 0.
If we need a sanity check for those other in kernel users then
WARN_ON_ONCE(flags & ~PIDFD_NONBLOCK) makes more sense.
- Don't pass O_RDWR to get_unused_fd_flags(), it ignores everything except
O_CLOEXEC.
- Don't pass O_CLOEXEC to anon_inode_getfile(), it ignores everything except
O_ACCMODE | O_NONBLOCK.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240125161734.GA778@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This field has been unsigned for a very long time, but most users of the
struct file_lock and the file locking internals themselves treat it as a
signed value. Change it to be pid_t (which is a signed int).
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-1-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the Qualcomm PBS (Programmable Boot Sequencer) driver. The QCOM PBS
driver supports configuring software PBS trigger events through PBS RAM
on Qualcomm Technologies, Inc (QTI) PMICs.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20240201204421.16992-6-quic_amelende@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the
REPLY direction, otherwise SYN retransmissions trigger incorrect
window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx
zerocopy path, we only support basic NIC -> user, no page cache
pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do
wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it
happens"
* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
doc/netlink/specs: Add missing attr in rt_link spec
idpf: avoid compiler padding in virtchnl2_ptype struct
selftests: mptcp: join: stop transfer when check is done (part 2)
selftests: mptcp: join: stop transfer when check is done (part 1)
selftests: mptcp: allow changing subtests prefix
selftests: mptcp: decrease BW in simult flows
selftests: mptcp: increase timeout to 30 min
selftests: mptcp: add missing kconfig for NF Mangle
selftests: mptcp: add missing kconfig for NF Filter in v6
selftests: mptcp: add missing kconfig for NF Filter
mptcp: fix data re-injection from stale subflow
selftests: net: enable some more knobs
selftests: net: add missing config for NF_TARGET_TTL
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
selftests: net: List helper scripts in TEST_FILES Makefile variable
selftests: net: Remove executable bits from library scripts
selftests: bonding: Check initial state
selftests: team: Add missing config options
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
xen-netback: properly sync TX responses
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- cleanups in the error path in hid-steam (Dan Carpenter)
- fixes for Wacom tablets selftests that sneaked in while the CI was
taking a break during the year end holidays (Benjamin Tissoires)
- null pointer check in nvidia-shield (Kunwu Chan)
- memory leak fix in hidraw (Su Hui)
- another null pointer fix in i2c-hid-of (Johan Hovold)
- another memory leak fix in HID-BPF this time, as well as a double
fdget() fix reported by Dan Carpenter (Benjamin Tissoires)
- fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)
- new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
(Jiri Kosina)
* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: use __bpf_kfunc instead of noinline
HID: bpf: actually free hdev memory after attaching a HID-BPF program
HID: bpf: remove double fdget()
HID: i2c-hid-of: fix NULL-deref on failed power up
HID: hidraw: fix a problem of memory leak in hidraw_release()
HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
HID: nvidia-shield: Add missing null pointer checks to LED initialization
HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
selftests/hid: wacom: fix confidence tests
HID: hid-steam: Fix cleanup in probe()
HID: hid-steam: remove pointless error message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fixes from Paul Moore:
"Two small patches to fix some problems relating to LSM hook return
values and how the individual LSMs interact"
* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value of the socket_getpeersec_*() hooks
lsm: fix the logic in security_inode_getsecctx()
|
|
This patch creates wordpart.h and includes it in asm/word-at-a-time.h
for all architectures. WORD_AT_A_TIME_CONSTANTS depends on kernel.h
because of REPEAT_BYTE. Moving this to another header and including it
where necessary allows us to not include the bloated kernel.h. Making
this implicit dependency on REPEAT_BYTE explicit allows for later
improvements in the lib/string.c inclusion list.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231226-libstringheader-v6-1-80aa08c7652c@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) TCP conntrack now only evaluates window negotiation for packets in
the REPLY direction, from Ryan Schaefer. Otherwise SYN retransmissions
trigger incorrect window scale negotiation. From Ryan Schaefer.
2) Restrict tunnel objects to NFPROTO_NETDEV which is where it makes sense
to use this object type.
3) Fix conntrack pick up from the middle of SCTP_CID_SHUTDOWN_ACK packets.
From Xin Long.
4) Another attempt from Jozsef Kadlecsik to address the slow down of the
swap command in ipset.
5) Replace a BUG_ON by WARN_ON_ONCE in nf_log, and consolidate check for
the case that the logger is NULL from the read side lock section.
6) Address lack of sanitization for custom expectations. Restrict layer 3
and 4 families to what it is supported by userspace.
* tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger
netfilter: ipset: fix performance regression in swap operation
netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV
netfilter: conntrack: correct window scaling with retransmitted SYN
====================
Link: https://lore.kernel.org/r/20240131225943.7536-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce kmemdup_array() API to duplicate `n` number of elements
from a given array. This internally uses kmemdup to allocate and duplicate
the `src` array.
Signed-off-by: Kartik <kkartik@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Fill-up the lock status error value properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pass additional argunent status_error over lock_status_get()
so drivers can fill it up. In case they do, expose the value over
previously introduced attribute to user. Do it only in case the
current lock_status is either "unlocked" or "holdover".
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Let the file system know how much dirty data exists at the passed
in offset. This allows file systems to allocate the right amount
of space that actually is written back if they can't eagerly
convert (e.g. because they don't support unwritten extents).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-15-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The ->map_blocks interface returns a valid range for writeback, but we
still call back into it for every block, which is a bit inefficient.
Change iomap_writepage_map to use the valid range in the map until the
end of the folio or the dirty range inside the folio instead of calling
back into every block.
Note that the range is not used over folio boundaries as we need to be
able to check the mapping sequence count under the folio lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-14-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Back in the days when a single bio could only be filled to the hardware
limits, and we scheduled a work item for each bio completion, chaining
multiple bios for a single ioend made a lot of sense to reduce the number
of completions. But these days bios can be filled until we reach the
number of vectors or total size limit, which means we can always fit at
least 1 megabyte worth of data in the worst case, but usually a lot more
due to large folios. The only thing bio chaining is buying us now is
to reduce the size of the allocation from an ioend with an embedded bio
into a plain bio, which is a 52 bytes differences on 64-bit systems.
This is not worth the added complexity, so remove the bio chaining and
only use the bio embedded into the ioend. This will help to simplify
further changes to the iomap writeback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-10-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The io_folios member in struct iomap_ioend counts the number of folios
added to an ioend. It is only used at submission time and can thus be
moved to iomap_writepage_ctx instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-4-hch@lst.de
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now we can simplify code that allocates cpumasks for local needs.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similarly to cpumask_weight_and(), cpumask_weight_andnot() is a handy
helper that may help to avoid creating an intermediate mask just to
calculate number of bits that set in a 1st given mask, and clear in 2nd
one.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
